def processing(self):
frames_devices = self.device_manager.poll_frames()
print('get frames')
# Calculate the pointcloud using the depth frames from all the devices
point_cloud = calculate_cumulative_pointcloud(frames_devices, self.calibration_info_devices, self.roi_2D)
# Get the bounding box for the pointcloud in image coordinates of the color imager
bounding_box_points_color_image, length, width, height = calculate_boundingbox_points(point_cloud, self.calibration_info_devices )
print( '길이=' ,length,' 폭=' , width,' 높이' , height )
def run_demo():
# Define some constants
resolution_width = 1280 # pixels
resolution_height = 720 # pixels
frame_rate = 15 # fps
dispose_frames_for_stablisation = 30 # frames
# chessboard_width = 6 # squares
# chessboard_height = 9 # squares
# square_size = 0.0253 # meters
try:
# Enable the streams from all the intel realsense devices
rs_config = rs.config()
rs_config.enable_stream(rs.stream.depth, resolution_width, resolution_height, rs.format.z16, frame_rate)
rs_config.enable_stream(rs.stream.infrared, 1, resolution_width, resolution_height, rs.format.y8, frame_rate)
rs_config.enable_stream(rs.stream.color, resolution_width, resolution_height, rs.format.bgr8, frame_rate)
# Use the device manager class to enable the devices and get the frames
device_manager = DeviceManager(rs.context(), rs_config)
device_manager.enable_all_devices()
# Allow some frames for the auto-exposure controller to stablise
for frame in range(dispose_frames_for_stablisation):
frames = device_manager.poll_frames()
assert( len(device_manager._available_devices) > 0 )
"""
1: Calibration
Calibrate all the available devices to the world co-ordinates.
For this purpose, a chessboard printout for use with opencv based calibration process is needed.
"""
# Get the intrinsics of the realsense device
intrinsics_devices = device_manager.get_device_intrinsics(frames)
# Set the chessboard parameters for calibration
# chessboard_params = [chessboard_height, chessboard_width, square_size]
# Estimate the pose of the chessboard in the world coordinate using the Kabsch Method
# calibrated_device_count = 0
# while calibrated_device_count < len(device_manager._available_devices):
# frames = device_manager.poll_frames()
# pose_estimator = PoseEstimation(frames, intrinsics_devices, chessboard_params)
# transformation_result_kabsch = pose_estimator.perform_pose_estimation()
# object_point = pose_estimator.get_chessboard_corners_in3d()
# calibrated_device_count = 0
# for device in device_manager._available_devices:
# if not transformation_result_kabsch[device][0]:
# print("Place the chessboard on the plane where the object needs to be detected..")
# else:
# calibrated_device_count += 1
# Save the transformation object for all devices in an array to use for measurements
# transformation_devices={}
# chessboard_points_cumulative_3d = np.array([-1,-1,-1]).transpose()
# for device in device_manager._available_devices:
# transformation_devices[device] = transformation_result_kabsch[device][1].inverse()
# points3D = object_point[device][2][:,object_point[device][3]]
# points3D = transformation_devices[device].apply_transformation(points3D)
# chessboard_points_cumulative_3d = np.column_stack( (chessboard_points_cumulative_3d,points3D) )
# # Extract the bounds between which the object's dimensions are needed
# # It is necessary for this demo that the object's length and breath is smaller than that of the chessboard
# chessboard_points_cumulative_3d = np.delete(chessboard_points_cumulative_3d, 0, 1)
# roi_2D = get_boundary_corners_2D(chessboard_points_cumulative_3d)
print("Calibration completed... \nPlace the box in the field of view of the devices...")
"""
2: Measurement and display
Measure the dimension of the object using depth maps from multiple RealSense devices
The information from Phase 1 will be used here
"""
# Enable the emitter of the devices
device_manager.enable_emitter(True)
# Load the JSON settings file in order to enable High Accuracy preset for the realsense
device_manager.load_settings_json("./HighResHighAccuracyPreset.json")
# Get the extrinsics of the device to be used later
extrinsics_devices = device_manager.get_depth_to_color_extrinsics(frames)
# Get the calibration info as a dictionary to help with display of the measurements onto the color image instead of infra red image
calibration_info_devices = defaultdict(list)
for calibration_info in (transformation_devices, intrinsics_devices, extrinsics_devices):
for key, value in calibration_info.items():
calibration_info_devices[key].append(value)
# Continue acquisition until terminated with Ctrl+C by the user
while 1:
# Get the frames from all the devices
frames_devices = device_manager.poll_frames()
# Calculate the pointcloud using the depth frames from all the devices
point_cloud = calculate_cumulative_pointcloud(frames_devices, calibration_info_devices, roi_2D)
# Get the bounding box for the pointcloud in image coordinates of the color imager
bounding_box_points_color_image, length, width, height = calculate_boundingbox_points(point_cloud, calibration_info_devices )
# Draw the bounding box points on the color image and visualise the results
visualise_measurements(frames_devices, bounding_box_points_color_image, length, width, height)
except KeyboardInterrupt:
print("The program was interupted by the user. Closing the program...")
finally:
device_manager.disable_streams()
cv2.destroyAllWindows()
def run_demo():
# Define some constants
resolution_width = 1280 # pixels
resolution_height = 720 # pixels
frame_rate = 15 # fps
dispose_frames_for_stablisation = 30 # frames
chessboard_width = 6 # squares
chessboard_height = 9 # squares
square_size = 0.0253 # meters
try:
# Enable the streams from all the intel realsense devices
rs_config = rs.config()
rs_config.enable_stream(rs.stream.depth, resolution_width, resolution_height, rs.format.z16, frame_rate)
rs_config.enable_stream(rs.stream.infrared, 1, resolution_width, resolution_height, rs.format.y8, frame_rate)
rs_config.enable_stream(rs.stream.color, resolution_width, resolution_height, rs.format.bgr8, frame_rate)
# Use the device manager class to enable the devices and get the frames
device_manager = DeviceManager(rs.context(), rs_config)
device_manager.enable_all_devices()
# Allow some frames for the auto-exposure controller to stablise
for frame in range(dispose_frames_for_stablisation):
frames = device_manager.poll_frames()
assert( len(device_manager._available_devices) > 0 )
"""
1: Calibration
Calibrate all the available devices to the world co-ordinates.
For this purpose, a chessboard printout for use with opencv based calibration process is needed.
"""
# Get the intrinsics of the realsense device
intrinsics_devices = device_manager.get_device_intrinsics(frames)
# Set the chessboard parameters for calibration
chessboard_params = [chessboard_height, chessboard_width, square_size]
# Estimate the pose of the chessboard in the world coordinate using the Kabsch Method
calibrated_device_count = 0
while calibrated_device_count < len(device_manager._available_devices):
frames = device_manager.poll_frames()
pose_estimator = PoseEstimation(frames, intrinsics_devices, chessboard_params)
transformation_result_kabsch = pose_estimator.perform_pose_estimation()
object_point = pose_estimator.get_chessboard_corners_in3d()
calibrated_device_count = 0
for device in device_manager._available_devices:
if not transformation_result_kabsch[device][0]:
print("Place the chessboard on the plane where the object needs to be detected..")
else:
calibrated_device_count += 1
# Save the transformation object for all devices in an array to use for measurements
transformation_devices={}
chessboard_points_cumulative_3d = np.array([-1,-1,-1]).transpose()
for device in device_manager._available_devices:
transformation_devices[device] = transformation_result_kabsch[device][1].inverse()
points3D = object_point[device][2][:,object_point[device][3]]
points3D = transformation_devices[device].apply_transformation(points3D)
chessboard_points_cumulative_3d = np.column_stack( (chessboard_points_cumulative_3d,points3D) )
# Extract the bounds between which the object's dimensions are needed
# It is necessary for this demo that the object's length and breath is smaller than that of the chessboard
chessboard_points_cumulative_3d = np.delete(chessboard_points_cumulative_3d, 0, 1)
roi_2D = get_boundary_corners_2D(chessboard_points_cumulative_3d)
print("Calibration completed... \nPlace the box in the field of view of the devices...")
"""
2: Measurement and display
Measure the dimension of the object using depth maps from multiple RealSense devices
The information from Phase 1 will be used here
"""
# Enable the emitter of the devices
device_manager.enable_emitter(True)
# Load the JSON settings file in order to enable High Accuracy preset for the realsense
device_manager.load_settings_json("./HighResHighAccuracyPreset.json")
# Get the extrinsics of the device to be used later
extrinsics_devices = device_manager.get_depth_to_color_extrinsics(frames)
# Get the calibration info as a dictionary to help with display of the measurements onto the color image instead of infra red image
calibration_info_devices = defaultdict(list)
for calibration_info in (transformation_devices, intrinsics_devices, extrinsics_devices):
for key, value in calibration_info.items():
calibration_info_devices[key].append(value)
# Continue acquisition until terminated with Ctrl+C by the user
while 1:
# Get the frames from all the devices
frames_devices = device_manager.poll_frames()
# Calculate the pointcloud using the depth frames from all the devices
point_cloud = calculate_cumulative_pointcloud(frames_devices, calibration_info_devices, roi_2D)
# Get the bounding box for the pointcloud in image coordinates of the color imager
bounding_box_points_color_image, length, width, height = calculate_boundingbox_points(point_cloud, calibration_info_devices )
# Draw the bounding box points on the color image and visualise the results
visualise_measurements(frames_devices, bounding_box_points_color_image, length, width, height)
except KeyboardInterrupt:
print("The program was interupted by the user. Closing the program...")
finally:
device_manager.disable_streams()
cv2.destroyAllWindows()
