def construct():
g = Graph()
# -------------------------------------------------------------------------
# Supported tests
# -------------------------------------------------------------------------
test_names = [
# CPU Tests
#'apb_mux_test',
#'hello_test',
#'memory_test',
#'dma_single_channel',
#'default_slaves_test',
#'interrupts_test',
#'tlx_test',
#'cgra_test',
#'master_clock_test',
'app_test',
'harris_test',
#'app_test_two_images',
#'app_test_reconfig',
#'app_test_reconfig_pipeline',
#'app_test_2_kernels_1_cgra',
# 'cascade_test',
#'resnet_test',
#'resnet_test_i4_o3',
#'demosaic_complex',
#'demosaic_complex_twice',
#'demosaic_complex_harris',
#'resnet_pond',
# CXDT Tests
'discovery',
]
# -------------------------------------------------------------------------
# Parameters
# -------------------------------------------------------------------------
parameters = {
'construct_file': __file__,
'design_name': 'test-soc',
'soc_only': False,
'interconnect_only': False,
'array_width': 32,
'array_height': 16,
'clock_period': 1.0,
'ARM_IP_DIR': '/home/kkoul/aham3soc_armip',
'AHA_IP_DIR': '/sim/kkoul/AhaM3SoC',
'GATE_LEVEL_DIR': '/home/kkoul/gate_level_199',
'GARNET_DIR': '/sim/kkoul/garnet',
'TLX_FWD_DATA_LO_WIDTH': 16,
'TLX_REV_DATA_LO_WIDTH': 45,
}
# -------------------------------------------------------------------------
# Custom steps
# -------------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
garnet_rtl = Step(parameters['GARNET_DIR'] + '/mflowgen/common/rtl')
compile_design = Step(this_dir + '/compile_design')
compile_design_gls = Step(this_dir + '/compile_design_gls')
build_test = Step(this_dir + '/build_test')
run_test = Step(this_dir + '/run_test')
run_test_gls = Step(this_dir + '/run_test_gls')
verdict = Step(this_dir + '/verdict')
test_gen = Step(this_dir + '/test_gen')
ptpx = Step(this_dir + '/ptpx')
# -------------------------------------------------------------------------
# Parallelize test build and run
# -------------------------------------------------------------------------
test_count = len(test_names)
build_steps = list(map((lambda _: build_test.clone()), range(test_count)))
run_steps = list(map((lambda _: run_test.clone()), range(test_count)))
run_gls_steps = list(
map((lambda _: run_test_gls.clone()), range(test_count)))
ptpx_steps = list(map((lambda _: ptpx.clone()), range(test_count)))
for step, name in zip(build_steps, test_names):
step.set_name('build_' + name)
for step, name in zip(run_steps, test_names):
step.set_name('run_' + name)
for step, name in zip(run_gls_steps, test_names):
step.set_name('run_gls_' + name)
for step, name in zip(ptpx_steps, test_names):
step.set_name('ptpx_' + name)
# -------------------------------------------------------------------------
# Input/output dependencies
# -------------------------------------------------------------------------
# 'compile_design' step produces a simulation executable and its accompanying collateral
compile_design.extend_outputs(['xcelium.d'])
compile_design.extend_inputs(['design.v'])
compile_design_gls.extend_outputs(['simv'])
compile_design_gls.extend_outputs(['simv.daidir'])
# 'build_test' produces final images for both the CXDT and CPU
for step in build_steps:
step.extend_outputs(['CXDT.bin'])
# 'run_tests' takes CXDT.bin, CPU.bin, and xcelium.d to produce a log
for step, test in zip(run_steps, test_names):
step.extend_inputs(['CXDT.bin', 'xcelium.d'])
step.extend_outputs(['xrun_run_' + test + '.log'])
# 'run_gls_tests' takes CXDT.bin, CPU.bin, and simv and simv.daidir to produce a log
for step, test in zip(run_gls_steps, test_names):
step.extend_inputs(['CXDT.bin', 'simv', 'simv.daidir'])
step.extend_outputs(['run.saif'])
# 'ptpx' takes run.saif to produce power reports
for step, test in zip(run_gls_steps, test_names):
step.extend_inputs(['run.saif'])
# 'verdict' consumes the run logs
run_logs = list(map((lambda test: 'xrun_run_' + test + '.log'),
test_names))
verdict.extend_inputs(run_logs)
# -------------------------------------------------------------------------
# Graph -- Add nodes
# -------------------------------------------------------------------------
g.add_step(garnet_rtl)
g.add_step(compile_design)
g.add_step(compile_design_gls)
g.add_step(test_gen)
for s in build_steps:
g.add_step(s)
for s in run_steps:
g.add_step(s)
for s in run_gls_steps:
g.add_step(s)
for s in ptpx_steps:
g.add_step(s)
g.add_step(verdict)
# -------------------------------------------------------------------------
# Graph -- Add edges
# -------------------------------------------------------------------------
g.connect_by_name(garnet_rtl, compile_design)
for r, b in zip(run_steps, build_steps):
g.connect_by_name(b, r)
g.connect_by_name(compile_design, r)
g.connect_by_name(r, verdict)
for r, b in zip(run_gls_steps, build_steps):
g.connect_by_name(b, r)
g.connect_by_name(compile_design_gls, r)
for p, r in zip(ptpx_steps, run_gls_steps):
g.connect_by_name(r, p)
# -------------------------------------------------------------------------
# Set general parameters
# -------------------------------------------------------------------------
g.update_params(parameters)
# -------------------------------------------------------------------------
# Set node-specific parameters
# -------------------------------------------------------------------------
# Turn off power domain to improve the speed
garnet_rtl.update_params({'PWR_AWARE': False})
garnet_rtl.update_params({'array_width': parameters['array_width']})
garnet_rtl.update_params({'array_height': parameters['array_height']})
for step, test in zip(build_steps, test_names):
step.update_params({'TEST_NAME': test})
for step, test in zip(run_steps, test_names):
step.update_params({'TEST_NAME': test})
for step, test in zip(run_gls_steps, test_names):
step.update_params({'TEST_NAME': test})
for step, test in zip(ptpx_steps, test_names):
step.update_params({'TEST_NAME': test})
compile_design.update_params({'CGRA_RD_WS': 4})
# -------------------------------------------------------------------------
# Pre-conditions
# -------------------------------------------------------------------------
# 'verdict' requires all tests to have passed
verdict.extend_preconditions([
"assert 'TEST PASSED' in File('inputs/" + run_log +
"', enable_case_sensitive = True)" for run_log in run_logs
])
# -------------------------------------------------------------------------
# Post-conditions
# -------------------------------------------------------------------------
# 'compile_tbench' must be successful
compile_design.extend_postconditions([
"assert 'Error' not in File('xrun_compile.log', enable_case_sensitive = True)",
"assert File('outputs/xcelium.d')",
])
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'multicorner-multivt'
pwr_aware = True
parameters = {
'construct_path': __file__,
'design_name': 'Tile_MemCore',
# 'clock_period' : 1.1, # 900MHz never finishes AFAICT
# 'clock_period' : 1.25, # 800MHz requires > ten hours
'clock_period': 4.0, # 250MHz finishes in three hours
'adk': adk_name,
'adk_view': adk_view,
# Synthesis
'flatten_effort': 3,
'topographical': True,
# SRAM macros
'num_words': 512,
'word_size': 32,
'mux_size': 4,
'corner': "tt0p8v25c",
'bc_corner': "ffg0p88v125c",
'partial_write': False,
# Utilization target
'core_density_target': 0.74,
# RTL Generation
'interconnect_only': True,
# Power Domains
'PWR_AWARE': pwr_aware,
'testbench_name': 'Interconnect_tb',
'gl_strip_path': 'Interconnect_tb/dut'
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/../common/rtl')
genlibdb_constraints = Step(this_dir +
'/../common/custom-genlibdb-constraints')
constraints = Step(this_dir + '/constraints')
gen_sram = Step(this_dir + '/../common/gen_sram_macro')
custom_init = Step(this_dir + '/custom-init')
custom_genus_scripts = Step(this_dir + '/custom-genus-scripts')
custom_flowgen_setup = Step(this_dir + '/custom-flowgen-setup')
custom_lvs = Step(this_dir + '/custom-lvs-rules')
custom_power = Step(this_dir + '/../common/custom-power-leaf')
gen_testbench = Step(this_dir + '/gen_testbench')
gl_sim = Step(this_dir + '/custom-vcs-sim')
gl_power = Step(this_dir + '/../common/synopsys-ptpx-gl')
xcelium_sim = Step(this_dir + '/../common/cadence-xcelium-sim')
# Power aware setup
if pwr_aware:
power_domains = Step(this_dir + '/../common/power-domains')
pwr_aware_gls = Step(this_dir + '/../common/pwr-aware-gls')
# Default steps
info = Step('info', default=True)
synth = Step('cadence-genus-synthesis', default=True)
iflow = Step('cadence-innovus-flowsetup', default=True)
init = Step('cadence-innovus-init', default=True)
power = Step('cadence-innovus-power', default=True)
place = Step('cadence-innovus-place', default=True)
cts = Step('cadence-innovus-cts', default=True)
postcts_hold = Step('cadence-innovus-postcts_hold', default=True)
route = Step('cadence-innovus-route', default=True)
postroute = Step('cadence-innovus-postroute', default=True)
postroute_hold = Step('cadence-innovus-postroute_hold', default=True)
signoff = Step('cadence-innovus-signoff', default=True)
pt_signoff = Step('synopsys-pt-timing-signoff', default=True)
genlibdb = Step('cadence-genus-genlib', default=True)
if which("calibre") is not None:
drc = Step('mentor-calibre-drc', default=True)
lvs = Step('mentor-calibre-lvs', default=True)
else:
drc = Step('cadence-pegasus-drc', default=True)
lvs = Step('cadence-pegasus-lvs', default=True)
debugcalibre = Step('cadence-innovus-debug-calibre', default=True)
# Extra DC input
synth.extend_inputs(["common.tcl"])
synth.extend_inputs(["simple_common.tcl"])
# Add sram macro inputs to downstream nodes
synth.extend_inputs(['sram_tt.lib', 'sram.lef'])
#pt_signoff.extend_inputs( ['sram_tt.db'] )
genlibdb.extend_inputs(['sram_tt.lib'])
# These steps need timing and lef info for srams
sram_steps = \
[iflow, init, power, place, cts, postcts_hold, route, postroute, postroute_hold, signoff]
for step in sram_steps:
step.extend_inputs(['sram_tt.lib', 'sram_ff.lib', 'sram.lef'])
# Need the sram gds to merge into the final layout
signoff.extend_inputs(['sram.gds'])
# Need SRAM spice file for LVS
lvs.extend_inputs(['sram.spi'])
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs(custom_init.all_outputs())
power.extend_inputs(custom_power.all_outputs())
# Add extra input edges to genlibdb for loop-breaking constraints
genlibdb.extend_inputs(genlibdb_constraints.all_outputs())
synth.extend_inputs(custom_genus_scripts.all_outputs())
iflow.extend_inputs(custom_flowgen_setup.all_outputs())
synth.extend_outputs(["sdc"])
iflow.extend_inputs(["sdc"])
init.extend_inputs(["sdc"])
power.extend_inputs(["sdc"])
place.extend_inputs(["sdc"])
cts.extend_inputs(["sdc"])
xcelium_sim.extend_inputs(
["array_rtl.v", "CW_fp_mult.v", "CW_fp_add.v", "sram.v"])
order = synth.get_param('order')
order.append('copy_sdc.tcl')
synth.set_param('order', order)
# Power aware setup
if pwr_aware:
synth.extend_inputs([
'designer-interface.tcl', 'upf_Tile_MemCore.tcl',
'mem-constraints.tcl', 'mem-constraints-2.tcl',
'dc-dont-use-constraints.tcl'
])
init.extend_inputs([
'check-clamp-logic-structure.tcl', 'upf_Tile_MemCore.tcl',
'mem-load-upf.tcl', 'dont-touch-constraints.tcl',
'pd-mem-floorplan.tcl', 'mem-add-endcaps-welltaps-setup.tcl',
'pd-add-endcaps-welltaps.tcl', 'mem-power-switches-setup.tcl',
'add-power-switches.tcl'
])
place.extend_inputs([
'check-clamp-logic-structure.tcl', 'place-dont-use-constraints.tcl'
])
power.extend_inputs(['pd-globalnetconnect.tcl'])
cts.extend_inputs(
['check-clamp-logic-structure.tcl', 'conn-aon-cells-vdd.tcl'])
postcts_hold.extend_inputs(
['check-clamp-logic-structure.tcl', 'conn-aon-cells-vdd.tcl'])
route.extend_inputs(
['check-clamp-logic-structure.tcl', 'conn-aon-cells-vdd.tcl'])
postroute.extend_inputs(
['check-clamp-logic-structure.tcl', 'conn-aon-cells-vdd.tcl'])
postroute_hold.extend_inputs(['conn-aon-cells-vdd.tcl'])
signoff.extend_inputs([
'check-clamp-logic-structure.tcl', 'conn-aon-cells-vdd.tcl',
'pd-generate-lvs-netlist.tcl'
])
pwr_aware_gls.extend_inputs(['design.vcs.pg.v', 'sram_pwr.v'])
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(gen_sram)
g.add_step(constraints)
g.add_step(synth)
g.add_step(custom_genus_scripts)
g.add_step(iflow)
g.add_step(custom_flowgen_setup)
g.add_step(init)
g.add_step(custom_init)
g.add_step(power)
g.add_step(custom_power)
g.add_step(place)
g.add_step(cts)
g.add_step(postcts_hold)
g.add_step(route)
g.add_step(postroute)
g.add_step(postroute_hold)
g.add_step(signoff)
g.add_step(pt_signoff)
g.add_step(genlibdb_constraints)
g.add_step(genlibdb)
g.add_step(drc)
g.add_step(lvs)
g.add_step(custom_lvs)
g.add_step(debugcalibre)
g.add_step(gen_testbench)
g.add_step(gl_sim)
g.add_step(gl_power)
g.add_step(xcelium_sim)
# Power aware step
if pwr_aware:
g.add_step(power_domains)
g.add_step(pwr_aware_gls)
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name(adk, gen_sram)
g.connect_by_name(adk, synth)
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, power)
g.connect_by_name(adk, place)
g.connect_by_name(adk, cts)
g.connect_by_name(adk, postcts_hold)
g.connect_by_name(adk, route)
g.connect_by_name(adk, postroute)
g.connect_by_name(adk, postroute_hold)
g.connect_by_name(adk, signoff)
g.connect_by_name(adk, drc)
g.connect_by_name(adk, lvs)
g.connect_by_name(gen_sram, synth)
g.connect_by_name(gen_sram, iflow)
g.connect_by_name(gen_sram, init)
g.connect_by_name(gen_sram, power)
g.connect_by_name(gen_sram, place)
g.connect_by_name(gen_sram, cts)
g.connect_by_name(gen_sram, postcts_hold)
g.connect_by_name(gen_sram, route)
g.connect_by_name(gen_sram, postroute)
g.connect_by_name(gen_sram, postroute_hold)
g.connect_by_name(gen_sram, signoff)
g.connect_by_name(gen_sram, genlibdb)
g.connect_by_name(gen_sram, pt_signoff)
g.connect_by_name(gen_sram, drc)
g.connect_by_name(gen_sram, lvs)
g.connect_by_name(rtl, synth)
g.connect_by_name(constraints, synth)
g.connect_by_name(custom_genus_scripts, synth)
g.connect_by_name(synth, iflow)
g.connect_by_name(synth, init)
g.connect_by_name(synth, power)
g.connect_by_name(synth, place)
g.connect_by_name(synth, cts)
g.connect_by_name(custom_flowgen_setup, iflow)
g.connect_by_name(iflow, init)
g.connect_by_name(iflow, power)
g.connect_by_name(iflow, place)
g.connect_by_name(iflow, cts)
g.connect_by_name(iflow, postcts_hold)
g.connect_by_name(iflow, route)
g.connect_by_name(iflow, postroute)
g.connect_by_name(iflow, postroute_hold)
g.connect_by_name(iflow, signoff)
g.connect_by_name(custom_init, init)
g.connect_by_name(custom_power, power)
g.connect_by_name(custom_lvs, lvs)
g.connect_by_name(init, power)
g.connect_by_name(power, place)
g.connect_by_name(place, cts)
g.connect_by_name(cts, postcts_hold)
g.connect_by_name(postcts_hold, route)
g.connect_by_name(route, postroute)
g.connect_by_name(postroute, postroute_hold)
g.connect_by_name(postroute_hold, signoff)
g.connect_by_name(signoff, drc)
g.connect_by_name(signoff, lvs)
g.connect(signoff.o('design-merged.gds'), drc.i('design_merged.gds'))
g.connect(signoff.o('design-merged.gds'), lvs.i('design_merged.gds'))
g.connect_by_name(signoff, genlibdb)
g.connect_by_name(adk, genlibdb)
g.connect_by_name(genlibdb_constraints, genlibdb)
g.connect_by_name(adk, pt_signoff)
g.connect_by_name(signoff, pt_signoff)
g.connect_by_name(adk, debugcalibre)
g.connect_by_name(synth, debugcalibre)
g.connect_by_name(iflow, debugcalibre)
g.connect_by_name(signoff, debugcalibre)
g.connect_by_name(drc, debugcalibre)
g.connect_by_name(lvs, debugcalibre)
# Gl sim just needs tb, adk, and outputs from signoff...
g.connect_by_name(gen_testbench, gl_sim)
g.connect_by_name(adk, gl_sim)
g.connect_by_name(signoff, gl_sim)
# xcelium sim just needs tb, adk, and outputs from signoff...
g.connect_by_name(gen_testbench, xcelium_sim)
g.connect_by_name(adk, xcelium_sim)
g.connect_by_name(signoff, xcelium_sim)
g.connect_by_name(gen_sram, xcelium_sim)
# Now hand off the rest of everything to ptpx-gl
g.connect_by_name(adk, gl_power)
g.connect_by_name(signoff, gl_power)
g.connect_by_name(xcelium_sim, gl_power)
# Pwr aware steps:
if pwr_aware:
g.connect_by_name(power_domains, synth)
g.connect_by_name(power_domains, init)
g.connect_by_name(power_domains, power)
g.connect_by_name(power_domains, place)
g.connect_by_name(power_domains, cts)
g.connect_by_name(power_domains, postcts_hold)
g.connect_by_name(power_domains, route)
g.connect_by_name(power_domains, postroute)
g.connect_by_name(power_domains, postroute_hold)
g.connect_by_name(power_domains, signoff)
g.connect_by_name(adk, pwr_aware_gls)
g.connect_by_name(gen_sram, pwr_aware_gls)
g.connect_by_name(signoff, pwr_aware_gls)
#g.connect(power_domains.o('pd-globalnetconnect.tcl'), power.i('globalnetconnect.tcl'))
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params(parameters)
# Update PWR_AWARE variable
synth.update_params({'PWR_AWARE': parameters['PWR_AWARE']}, True)
init.update_params({'PWR_AWARE': parameters['PWR_AWARE']}, True)
power.update_params({'PWR_AWARE': parameters['PWR_AWARE']}, True)
gl_power.update_params({'strip_path': parameters['gl_strip_path']}, True)
if pwr_aware:
pwr_aware_gls.update_params({'design_name': parameters['design_name']},
True)
init.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
place.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
cts.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
postcts_hold.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
route.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
postroute.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
signoff.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
# Core density target param
init.update_params(
{'core_density_target': parameters['core_density_target']}, True)
# Disable pwr aware flow
#init.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, allow_new=True )
#power.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, allow_new=True )
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
# init -- Add 'edge-blockages.tcl' after 'pin-assignments.tcl'
order = init.get_param('order') # get the default script run order
path_group_idx = order.index('make-path-groups.tcl')
order.insert(path_group_idx + 1, 'additional-path-groups.tcl')
pin_idx = order.index('pin-assignments.tcl') # find pin-assignments.tcl
order.insert(pin_idx + 1, 'edge-blockages.tcl') # add here
init.update_params({'order': order})
# Adding new input for genlibdb node to run
order = genlibdb.get_param('order') # get the default script run order
read_idx = order.index('read_design.tcl') # find read_design.tcl
order.insert(read_idx + 1, 'genlibdb-constraints.tcl') # add here
genlibdb.update_params({'order': order})
# Pwr aware steps:
if pwr_aware:
# init node
order = init.get_param('order')
read_idx = order.index('floorplan.tcl') # find floorplan.tcl
order.insert(read_idx + 1, 'mem-load-upf.tcl') # add here
order.insert(read_idx + 2, 'pd-mem-floorplan.tcl') # add here
order.insert(read_idx + 3,
'mem-add-endcaps-welltaps-setup.tcl') # add here
order.insert(read_idx + 4, 'pd-add-endcaps-welltaps.tcl') # add here
order.insert(read_idx + 5, 'mem-power-switches-setup.tcl') # add here
order.insert(read_idx + 6, 'add-power-switches.tcl') # add here
order.remove('add-endcaps-welltaps.tcl')
order.append('check-clamp-logic-structure.tcl')
init.update_params({'order': order})
# power node
order = power.get_param('order')
order.insert(0, 'pd-globalnetconnect.tcl') # add here
order.remove('globalnetconnect.tcl')
power.update_params({'order': order})
# place node
order = place.get_param('order')
read_idx = order.index('main.tcl') # find main.tcl
order.insert(read_idx - 1, 'place-dont-use-constraints.tcl')
order.append('check-clamp-logic-structure.tcl')
place.update_params({'order': order})
# cts node
order = cts.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
cts.update_params({'order': order})
# postcts_hold node
order = postcts_hold.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
postcts_hold.update_params({'order': order})
# route node
order = route.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
route.update_params({'order': order})
# postroute node
order = postroute.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
postroute.update_params({'order': order})
# postroute-hold node
order = postroute_hold.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
postroute_hold.update_params({'order': order})
# signoff node
order = signoff.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
read_idx = order.index(
'generate-results.tcl') # find generate_results.tcl
order.insert(read_idx + 1, 'pd-generate-lvs-netlist.tcl')
signoff.update_params({'order': order})
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'multicorner'
parameters = {
'construct_path' : __file__,
'design_name' : 'glb_tile',
'clock_period' : 1.25,
'adk' : adk_name,
'adk_view' : adk_view,
# Synthesis
'flatten_effort' : 3,
'topographical' : True,
# Floorplan
'bank_height' : 8,
'array_width' : 32,
'num_glb_tiles' : 16,
# Memory size (unit: KB)
'glb_tile_mem_size' : 256,
# SRAM macros
'num_words' : 2048,
'word_size' : 64,
'mux_size' : 8,
'corner' : "tt0p8v25c",
'partial_write' : True,
# Power Domains
'PWR_AWARE' : False,
# hold target slack
'hold_target_slack' : 0.053
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname( os.path.abspath( __file__ ) )
# ADK step
g.set_adk( adk_name )
adk = g.get_adk_step()
# Custom steps
rtl = Step( this_dir + '/../common/rtl' )
constraints = Step( this_dir + '/constraints' )
gen_sram = Step( this_dir + '/../common/gen_sram_macro' )
custom_init = Step( this_dir + '/custom-init' )
custom_power = Step( this_dir + '/../common/custom-power-leaf' )
short_fix = Step( this_dir + '/../common/custom-short-fix' )
custom_lvs = Step( this_dir + '/custom-lvs-rules' )
lib2db = Step( this_dir + '/../common/synopsys-dc-lib2db' )
# Default steps
info = Step( 'info', default=True )
# constraints = Step( 'constraints', default=True )
synth = Step( 'cadence-genus-synthesis', default=True )
iflow = Step( 'cadence-innovus-flowsetup', default=True )
init = Step( 'cadence-innovus-init', default=True )
power = Step( 'cadence-innovus-power', default=True )
place = Step( 'cadence-innovus-place', default=True )
cts = Step( 'cadence-innovus-cts', default=True )
postcts_hold = Step( 'cadence-innovus-postcts_hold', default=True )
route = Step( 'cadence-innovus-route', default=True )
postroute = Step( 'cadence-innovus-postroute', default=True )
postroute_hold = Step( 'cadence-innovus-postroute_hold',default=True )
signoff = Step( 'cadence-innovus-signoff', default=True )
pt_signoff = Step( 'synopsys-pt-timing-signoff', default=True )
genlib = Step( 'cadence-genus-genlib', default=True )
if which("calibre") is not None:
drc = Step( 'mentor-calibre-drc', default=True )
lvs = Step( 'mentor-calibre-lvs', default=True )
else:
drc = Step( 'cadence-pegasus-drc', default=True )
lvs = Step( 'cadence-pegasus-lvs', default=True )
debugcalibre = Step( 'cadence-innovus-debug-calibre', default=True )
# Add (dummy) parameters to the default innovus init step
init.update_params( {
'core_width' : 0,
'core_height' : 0
}, allow_new=True )
# Add sram macro inputs to downstream nodes
pt_signoff.extend_inputs( ['sram_tt.db'] )
# These steps need timing and lef info for srams
sram_steps = \
[synth, iflow, init, power, place, cts, postcts_hold, \
route, postroute, postroute_hold, signoff, genlib]
for step in sram_steps:
step.extend_inputs( ['sram_tt.lib', 'sram.lef'] )
# Need the sram gds to merge into the final layout
signoff.extend_inputs( ['sram.gds'] )
# Need SRAM spice file for LVS
lvs.extend_inputs( ['sram.spi'] )
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs( custom_init.all_outputs() )
power.extend_inputs( custom_power.all_outputs() )
# Add header files to outputs
rtl.extend_outputs( ['header'] )
rtl.extend_postconditions( ["assert File( 'outputs/header' ) "] )
#-----------------------------------------------------------------------
# Add short_fix script(s) to list of available postroute_hold scripts
#-----------------------------------------------------------------------
postroute_hold.extend_inputs( short_fix.all_outputs() )
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step( info )
g.add_step( rtl )
g.add_step( gen_sram )
g.add_step( constraints )
g.add_step( synth )
g.add_step( iflow )
g.add_step( init )
g.add_step( custom_init )
g.add_step( power )
g.add_step( custom_power )
g.add_step( place )
g.add_step( cts )
g.add_step( postcts_hold )
g.add_step( route )
g.add_step( postroute )
g.add_step( short_fix )
g.add_step( postroute_hold )
g.add_step( signoff )
g.add_step( pt_signoff )
g.add_step( genlib )
g.add_step( lib2db )
g.add_step( drc )
g.add_step( lvs )
g.add_step( custom_lvs )
g.add_step( debugcalibre )
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name( adk, gen_sram )
g.connect_by_name( adk, synth )
g.connect_by_name( adk, iflow )
g.connect_by_name( adk, init )
g.connect_by_name( adk, power )
g.connect_by_name( adk, place )
g.connect_by_name( adk, cts )
g.connect_by_name( adk, postcts_hold )
g.connect_by_name( adk, route )
g.connect_by_name( adk, postroute )
g.connect_by_name( adk, postroute_hold )
g.connect_by_name( adk, signoff )
g.connect_by_name( adk, drc )
g.connect_by_name( adk, lvs )
g.connect_by_name( gen_sram, synth )
g.connect_by_name( gen_sram, iflow )
g.connect_by_name( gen_sram, init )
g.connect_by_name( gen_sram, power )
g.connect_by_name( gen_sram, place )
g.connect_by_name( gen_sram, cts )
g.connect_by_name( gen_sram, postcts_hold )
g.connect_by_name( gen_sram, route )
g.connect_by_name( gen_sram, postroute )
g.connect_by_name( gen_sram, postroute_hold )
g.connect_by_name( gen_sram, signoff )
g.connect_by_name( gen_sram, genlib )
g.connect_by_name( gen_sram, pt_signoff )
g.connect_by_name( gen_sram, drc )
g.connect_by_name( gen_sram, lvs )
g.connect_by_name( rtl, synth )
g.connect_by_name( constraints, synth )
g.connect_by_name( synth, iflow )
g.connect_by_name( synth, init )
g.connect_by_name( synth, power )
g.connect_by_name( synth, place )
g.connect_by_name( synth, cts )
g.connect_by_name( iflow, init )
g.connect_by_name( iflow, power )
g.connect_by_name( iflow, place )
g.connect_by_name( iflow, cts )
g.connect_by_name( iflow, postcts_hold )
g.connect_by_name( iflow, route )
g.connect_by_name( iflow, postroute_hold )
g.connect_by_name( iflow, postroute )
g.connect_by_name( iflow, signoff )
# Fetch short-fix script in prep for eventual use by postroute_hold
g.connect_by_name( short_fix, postroute_hold )
g.connect_by_name( custom_init, init )
g.connect_by_name( custom_power, power )
g.connect_by_name( custom_lvs, lvs )
g.connect_by_name( init, power )
g.connect_by_name( power, place )
g.connect_by_name( place, cts )
g.connect_by_name( cts, postcts_hold )
g.connect_by_name( postcts_hold, route )
g.connect_by_name( route, postroute )
g.connect_by_name( postroute, postroute_hold )
g.connect_by_name( postroute_hold, signoff )
g.connect_by_name( signoff, drc )
g.connect_by_name( signoff, lvs )
g.connect(signoff.o('design-merged.gds'), drc.i('design_merged.gds'))
g.connect(signoff.o('design-merged.gds'), lvs.i('design_merged.gds'))
g.connect_by_name( signoff, genlib )
g.connect_by_name( adk, genlib )
g.connect_by_name( genlib, lib2db )
g.connect_by_name( adk, pt_signoff )
g.connect_by_name( signoff, pt_signoff )
g.connect_by_name( adk, debugcalibre )
g.connect_by_name( synth, debugcalibre )
g.connect_by_name( iflow, debugcalibre )
g.connect_by_name( signoff, debugcalibre )
g.connect_by_name( drc, debugcalibre )
g.connect_by_name( lvs, debugcalibre )
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
rtl.update_params( { 'glb_only': True }, allow_new=True )
g.update_params( parameters )
# Add bank height param to init
init.update_params( { 'bank_height': parameters['bank_height'] }, True )
# Change nthreads
synth.update_params( { 'nthreads': 4 } )
iflow.update_params( { 'nthreads': 8 } )
# init -- Add 'edge-blockages.tcl' after 'pin-assignments.tcl'
order = init.get_param('order') # get the default script run order
pin_idx = order.index( 'pin-assignments.tcl' ) # find pin-assignments.tcl
order.insert( pin_idx + 1, 'edge-blockages.tcl' ) # add here
init.update_params( { 'order': order } )
# Disable pwr aware flow
init.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, allow_new=True )
power.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, allow_new=True )
# Increase hold slack on postroute_hold step
postroute_hold.update_params( { 'hold_target_slack': parameters['hold_target_slack'] }, allow_new=True )
# Add fix-shorts as the last thing to do in postroute_hold
order = postroute_hold.get_param('order') ; # get the default script run order
order.append('fix-shorts.tcl' ) ; # Add fix-shorts at the end
postroute_hold.update_params( { 'order': order } ) ; # Update
# useful_skew
cts.update_params( { 'useful_skew': False }, allow_new=True )
# cts.update_params( { 'useful_skew_ccopt_effort': 'extreme' }, allow_new=True )
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'multicorner-multivt'
pwr_aware = True
flatten = 3
if os.environ.get('FLATTEN'):
flatten = os.environ.get('FLATTEN')
synth_power = False
if os.environ.get('SYNTH_POWER') == 'True':
synth_power = True
# power domains do not work with post-synth power
if synth_power:
pwr_aware = False
parameters = {
'construct_path' : __file__,
'design_name' : 'Tile_PE',
'clock_period' : 1.1,
'adk' : adk_name,
'adk_view' : adk_view,
# Synthesis
'flatten_effort' : flatten,
'topographical' : True,
# RTL Generation
'interconnect_only' : True,
# Power Domains
'PWR_AWARE' : pwr_aware,
'core_density_target': 0.63,
# Power analysis
"use_sdf" : False, # uses sdf but not the way it is in xrun node
'app_to_run' : 'tests/conv_3_3',
'saif_instance' : 'testbench/dut',
'testbench_name' : 'testbench',
'strip_path' : 'testbench/dut'
}
# steveri 2101: Hoping this is temporary.
# But for now, 1.1ns pe tile is too big and full-chip CI test FAILS
if (os.getenv('USER') == "buildkite-agent"):
parameters['clock_period'] = 4.0; # 4ns = 250 MHz
# User-level option to change clock frequency
# E.g. 'export clock_period_PE="4.0"' to target 250MHz
# Optionally could restrict to bk only: if (os.getenv('USER') == "buildkite-agent")
cp=os.getenv('clock_period_PE')
if (cp != None):
print("@file_info: WARNING found env var 'clock_period_PE'")
print("@file_info: WARNING setting PE clock period to '%s'" % cp)
parameters['clock_period'] = cp;
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname( os.path.abspath( __file__ ) )
# ADK step
g.set_adk( adk_name )
adk = g.get_adk_step()
# Custom steps
rtl = Step( this_dir + '/../common/rtl' )
constraints = Step( this_dir + '/constraints' )
custom_init = Step( this_dir + '/custom-init' )
custom_genus_scripts = Step( this_dir + '/custom-genus-scripts' )
custom_flowgen_setup = Step( this_dir + '/custom-flowgen-setup' )
custom_power = Step( this_dir + '/../common/custom-power-leaf' )
short_fix = Step( this_dir + '/../common/custom-short-fix' )
genlibdb_constraints = Step( this_dir + '/../common/custom-genlibdb-constraints' )
custom_timing_assert = Step( this_dir + '/../common/custom-timing-assert' )
custom_dc_scripts = Step( this_dir + '/custom-dc-scripts' )
testbench = Step( this_dir + '/../common/testbench' )
application = Step( this_dir + '/../common/application' )
lib2db = Step( this_dir + '/../common/synopsys-dc-lib2db' )
if synth_power:
post_synth_power = Step( this_dir + '/../common/tile-post-synth-power' )
post_pnr_power = Step( this_dir + '/../common/tile-post-pnr-power' )
# Power aware setup
power_domains = None
pwr_aware_gls = None
if pwr_aware:
power_domains = Step( this_dir + '/../common/power-domains' )
pwr_aware_gls = Step( this_dir + '/../common/pwr-aware-gls' )
# Default steps
info = Step( 'info', default=True )
synth = Step( 'cadence-genus-synthesis', default=True )
iflow = Step( 'cadence-innovus-flowsetup', default=True )
init = Step( 'cadence-innovus-init', default=True )
power = Step( 'cadence-innovus-power', default=True )
place = Step( 'cadence-innovus-place', default=True )
cts = Step( 'cadence-innovus-cts', default=True )
postcts_hold = Step( 'cadence-innovus-postcts_hold', default=True )
route = Step( 'cadence-innovus-route', default=True )
postroute = Step( 'cadence-innovus-postroute', default=True )
signoff = Step( 'cadence-innovus-signoff', default=True )
pt_signoff = Step( 'synopsys-pt-timing-signoff', default=True )
genlibdb = Step( 'cadence-genus-genlib', default=True )
if which("calibre") is not None:
drc = Step( 'mentor-calibre-drc', default=True )
lvs = Step( 'mentor-calibre-lvs', default=True )
else:
drc = Step( 'cadence-pegasus-drc', default=True )
lvs = Step( 'cadence-pegasus-lvs', default=True )
debugcalibre = Step( 'cadence-innovus-debug-calibre', default=True )
# Add custom timing scripts
custom_timing_steps = [ synth, postcts_hold, signoff ] # connects to these
for c_step in custom_timing_steps:
c_step.extend_inputs( custom_timing_assert.all_outputs() )
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs( custom_init.all_outputs() )
power.extend_inputs( custom_power.all_outputs() )
genlibdb.extend_inputs( genlibdb_constraints.all_outputs() )
synth.extend_inputs( custom_genus_scripts.all_outputs() )
iflow.extend_inputs( custom_flowgen_setup.all_outputs() )
# Extra input to DC for constraints
synth.extend_inputs( ["common.tcl", "reporting.tcl", "generate-results.tcl", "scenarios.tcl", "report_alu.py", "parse_alu.py"] )
# Extra outputs from DC
synth.extend_outputs( ["sdc"] )
iflow.extend_inputs( ["scenarios.tcl", "sdc"] )
init.extend_inputs( ["sdc"] )
power.extend_inputs( ["sdc"] )
place.extend_inputs( ["sdc"] )
cts.extend_inputs( ["sdc"] )
order = synth.get_param( 'order' )
order.append( 'copy_sdc.tcl' )
synth.set_param( 'order', order )
# Power aware setup
if pwr_aware:
synth.extend_inputs(['designer-interface.tcl', 'upf_Tile_PE.tcl', 'pe-constraints.tcl', 'pe-constraints-2.tcl', 'dc-dont-use-constraints.tcl'])
init.extend_inputs(['upf_Tile_PE.tcl', 'pe-load-upf.tcl', 'dont-touch-constraints.tcl', 'pd-pe-floorplan.tcl', 'pe-add-endcaps-welltaps-setup.tcl', 'pd-add-endcaps-welltaps.tcl', 'pe-power-switches-setup.tcl', 'add-power-switches.tcl', 'check-clamp-logic-structure.tcl'])
power.extend_inputs(['pd-globalnetconnect.tcl'] )
place.extend_inputs(['place-dont-use-constraints.tcl', 'check-clamp-logic-structure.tcl', 'add-aon-tie-cells.tcl'])
cts.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'])
postcts_hold.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'] )
route.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'] )
postroute.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'] )
signoff.extend_inputs(['conn-aon-cells-vdd.tcl', 'pd-generate-lvs-netlist.tcl', 'check-clamp-logic-structure.tcl'] )
pwr_aware_gls.extend_inputs(['design.vcs.pg.v'])
# Add short_fix script(s) to list of available postroute scripts
postroute.extend_inputs( short_fix.all_outputs() )
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step( info )
g.add_step( rtl )
g.add_step( constraints )
g.add_step( custom_dc_scripts )
g.add_step( synth )
g.add_step( custom_timing_assert )
g.add_step( custom_genus_scripts )
g.add_step( iflow )
g.add_step( custom_flowgen_setup )
g.add_step( init )
g.add_step( custom_init )
g.add_step( power )
g.add_step( custom_power )
g.add_step( place )
g.add_step( cts )
g.add_step( postcts_hold )
g.add_step( route )
g.add_step( postroute )
g.add_step( short_fix )
g.add_step( signoff )
g.add_step( pt_signoff )
g.add_step( genlibdb_constraints )
g.add_step( genlibdb )
g.add_step( lib2db )
g.add_step( drc )
g.add_step( lvs )
g.add_step( debugcalibre )
g.add_step( application )
g.add_step( testbench )
if synth_power:
g.add_step( post_synth_power )
g.add_step( post_pnr_power )
# Power aware step
if pwr_aware:
g.add_step( power_domains )
g.add_step( pwr_aware_gls )
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Dynamically add edges
# Connect by name
g.connect_by_name( adk, synth )
g.connect_by_name( adk, iflow )
g.connect_by_name( adk, init )
g.connect_by_name( adk, power )
g.connect_by_name( adk, place )
g.connect_by_name( adk, cts )
g.connect_by_name( adk, postcts_hold )
g.connect_by_name( adk, route )
g.connect_by_name( adk, postroute )
g.connect_by_name( adk, signoff )
g.connect_by_name( adk, drc )
g.connect_by_name( adk, lvs )
g.connect_by_name( rtl, synth )
g.connect_by_name( constraints, synth )
g.connect_by_name( custom_genus_scripts, synth )
g.connect_by_name( constraints, iflow )
g.connect_by_name( custom_dc_scripts, iflow )
for c_step in custom_timing_steps:
g.connect_by_name( custom_timing_assert, c_step )
g.connect_by_name( synth, iflow )
g.connect_by_name( synth, init )
g.connect_by_name( synth, power )
g.connect_by_name( synth, place )
g.connect_by_name( synth, cts )
g.connect_by_name( synth, custom_flowgen_setup )
g.connect_by_name( custom_flowgen_setup, iflow )
g.connect_by_name( iflow, init )
g.connect_by_name( iflow, power )
g.connect_by_name( iflow, place )
g.connect_by_name( iflow, cts )
g.connect_by_name( iflow, postcts_hold )
g.connect_by_name( iflow, route )
g.connect_by_name( iflow, postroute )
g.connect_by_name( iflow, signoff )
g.connect_by_name( custom_init, init )
g.connect_by_name( custom_power, power )
# Fetch short-fix script in prep for eventual use by postroute
g.connect_by_name( short_fix, postroute )
g.connect_by_name( init, power )
g.connect_by_name( power, place )
g.connect_by_name( place, cts )
g.connect_by_name( cts, postcts_hold )
g.connect_by_name( postcts_hold, route )
g.connect_by_name( route, postroute )
g.connect_by_name( postroute, signoff )
g.connect_by_name( signoff, drc )
g.connect_by_name( signoff, lvs )
g.connect(signoff.o('design-merged.gds'), drc.i('design_merged.gds'))
g.connect(signoff.o('design-merged.gds'), lvs.i('design_merged.gds'))
g.connect_by_name( signoff, genlibdb )
g.connect_by_name( adk, genlibdb )
g.connect_by_name( genlibdb_constraints, genlibdb )
g.connect_by_name( genlibdb, lib2db )
g.connect_by_name( adk, pt_signoff )
g.connect_by_name( signoff, pt_signoff )
g.connect_by_name( application, testbench )
if synth_power:
g.connect_by_name( application, post_synth_power )
g.connect_by_name( synth, post_synth_power )
g.connect_by_name( testbench, post_synth_power )
g.connect_by_name( application, post_pnr_power )
g.connect_by_name( signoff, post_pnr_power )
g.connect_by_name( pt_signoff, post_pnr_power )
g.connect_by_name( testbench, post_pnr_power )
g.connect_by_name( adk, debugcalibre )
g.connect_by_name( synth, debugcalibre )
g.connect_by_name( iflow, debugcalibre )
g.connect_by_name( signoff, debugcalibre )
g.connect_by_name( drc, debugcalibre )
g.connect_by_name( lvs, debugcalibre )
# Pwr aware steps:
if pwr_aware:
g.connect_by_name( power_domains, synth )
g.connect_by_name( power_domains, init )
g.connect_by_name( power_domains, power )
g.connect_by_name( power_domains, place )
g.connect_by_name( power_domains, cts )
g.connect_by_name( power_domains, postcts_hold )
g.connect_by_name( power_domains, route )
g.connect_by_name( power_domains, postroute )
g.connect_by_name( power_domains, signoff )
g.connect_by_name( adk, pwr_aware_gls)
g.connect_by_name( signoff, pwr_aware_gls)
#g.connect(power_domains.o('pd-globalnetconnect.tcl'), power.i('globalnetconnect.tcl'))
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params( parameters )
# Add custom timing scripts
for c_step in custom_timing_steps:
order = c_step.get_param( 'order' )
order.append( 'report-special-timing.tcl' )
c_step.set_param( 'order', order )
c_step.extend_postconditions( [{ 'pytest': 'inputs/test_timing.py' }] )
# Update PWR_AWARE variable
synth.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, True )
init.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, True )
power.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, True )
if pwr_aware:
init.update_params( { 'flatten_effort': parameters['flatten_effort'] }, True )
pwr_aware_gls.update_params( { 'design_name': parameters['design_name'] }, True )
init.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
place.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
cts.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
postcts_hold.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
route.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
postroute.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
signoff.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
init.update_params( { 'core_density_target': parameters['core_density_target'] }, True )
# init -- Add 'edge-blockages.tcl' after 'pin-assignments.tcl'
# and 'additional-path-groups' after 'make_path_groups'
order = init.get_param('order') # get the default script run order
path_group_idx = order.index( 'make-path-groups.tcl' )
order.insert( path_group_idx + 1, 'additional-path-groups.tcl' )
pin_idx = order.index( 'pin-assignments.tcl' ) # find pin-assignments.tcl
order.insert( pin_idx + 1, 'edge-blockages.tcl' ) # add here
init.update_params( { 'order': order } )
# Adding new input for genlibdb node to run
order = genlibdb.get_param('order') # get the default script run order
read_idx = order.index( 'read_design.tcl' ) # find read_design.tcl
order.insert( read_idx + 1, 'genlibdb-constraints.tcl' ) # add here
genlibdb.update_params( { 'order': order } )
# Pwr aware steps:
if pwr_aware:
# init node
order = init.get_param('order')
read_idx = order.index( 'floorplan.tcl' ) # find floorplan.tcl
order.insert( read_idx + 1, 'pe-load-upf.tcl' ) # add here
order.insert( read_idx + 2, 'pd-pe-floorplan.tcl' ) # add here
order.insert( read_idx + 3, 'pe-add-endcaps-welltaps-setup.tcl' ) # add here
order.insert( read_idx + 4, 'pd-add-endcaps-welltaps.tcl' ) # add here
order.insert( read_idx + 5, 'pe-power-switches-setup.tcl') # add here
order.insert( read_idx + 6, 'add-power-switches.tcl' ) # add here
order.remove('add-endcaps-welltaps.tcl')
order.append('check-clamp-logic-structure.tcl')
init.update_params( { 'order': order } )
# power node
order = power.get_param('order')
order.insert( 0, 'pd-globalnetconnect.tcl' ) # add here
order.remove('globalnetconnect.tcl')
power.update_params( { 'order': order } )
# place node
order = place.get_param('order')
read_idx = order.index( 'main.tcl' ) # find main.tcl
order.insert(read_idx + 1, 'add-aon-tie-cells.tcl')
order.insert(read_idx - 1, 'place-dont-use-constraints.tcl')
order.append('check-clamp-logic-structure.tcl')
place.update_params( { 'order': order } )
# cts node
order = cts.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
cts.update_params( { 'order': order } )
# postcts_hold node
order = postcts_hold.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
postcts_hold.update_params( { 'order': order } )
# route node
order = route.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
route.update_params( { 'order': order } )
# postroute node
order = postroute.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
postroute.update_params( { 'order': order } )
# Add fix-shorts as the last thing to do in postroute
order = postroute.get_param('order') ; # get the default script run order
order.append('fix-shorts.tcl' ) ; # Add fix-shorts at the end
postroute.update_params( { 'order': order } ) ; # Update
# signoff node
order = signoff.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
read_idx = order.index( 'generate-results.tcl' ) # find generate_results.tcl
order.insert(read_idx + 1, 'pd-generate-lvs-netlist.tcl')
order.append('check-clamp-logic-structure.tcl')
signoff.update_params( { 'order': order } )
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'stdview'
parameters = {
'construct_path': __file__,
'design_name': 'GarnetSOC_pad_frame',
'clock_period': 20.0,
'adk': adk_name,
'adk_view': adk_view,
# Synthesis
'flatten_effort': 3,
'topographical': False,
'express_flow': False,
'skip_verify_connectivity': True,
'lvs_hcells_file': 'inputs/adk/hcells.inc',
'lvs_connect_names': '"VDD VSS VDDPST"'
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/rtl')
constraints = Step(this_dir + '/constraints')
init_fullchip = Step(this_dir + '/../common/init-fullchip')
netlist_fixing = Step(this_dir + '/../common/fc-netlist-fixing')
# Custom step 'pre-flowsetup'
# To get new lef cells e.g. 'icovl-cells.lef' into iflow, we gotta:
# - create new step 'pre_flowsetup' whose outputs are icovl cells
# -- link via "commands" group in pre-iflow/configure.yml
# - connect pre-flowsetup step to flowsetup (iflow) step
# - extend iflow inputs to include icovl cells
# - iflow "setup.tcl" automatically includes "inputs/*.lef"
pre_flowsetup = Step(this_dir + '/pre-flowsetup')
# More custom steps
custom_power = Step(this_dir + '/../common/custom-power-chip')
# It's not plugged in yet!
# custom_power = Step( this_dir + '/custom-power' )
# Some kinda primetime thingy maybe
# genlibdb_constraints = Step( this_dir + '/../common/custom-genlibdb-constraints' )
# Default steps
info = Step('info', default=True)
# constraints= Step( 'constraints', default=True )
dc = Step('synopsys-dc-synthesis', default=True)
iflow = Step('cadence-innovus-flowsetup', default=True)
init = Step('cadence-innovus-init', default=True)
power = Step('cadence-innovus-power', default=True)
place = Step('cadence-innovus-place', default=True)
route = Step('cadence-innovus-route', default=True)
signoff = Step('cadence-innovus-signoff', default=True)
pt_signoff = Step('synopsys-pt-timing-signoff', default=True)
genlibdb = Step('synopsys-ptpx-genlibdb', default=True)
gdsmerge = Step('mentor-calibre-gdsmerge', default=True)
drc = Step('mentor-calibre-drc', default=True)
init_fill = Step('mentor-calibre-fill', default=True)
lvs = Step('mentor-calibre-lvs', default=True)
debugcalibre = Step('cadence-innovus-debug-calibre', default=True)
# Die if unconnected bumps (why was this deleted?)
init.extend_postconditions(
["assert 'STILL UNCONNECTED: bump' not in File( 'mflowgen-run.log' )"])
# Send in the clones
# 'init' step now gets its own design-rule check
init_drc = drc.clone()
init_drc.set_name('init-drc')
# "init" now builds a gds file for its own drc check "init_drc";
# so need a gdsmerge step between the two
init_gdsmerge = gdsmerge.clone()
init_gdsmerge.set_name('init-gdsmerge')
#-----------------------------------------------------------------------
# Add extra input edges to innovus steps that need custom tweaks
#-----------------------------------------------------------------------
# "init" (cadence-innovus-init) inputs are "init_fullchip" outputs
init.extend_inputs(init_fullchip.all_outputs())
# Also: 'init' now produces a gds file
# for intermediate drc check 'init-drc'
# by way of intermediate gdsmerge step "init-gdsmerge"
init.extend_outputs(["design.gds.gz"])
# "power" inputs are "custom_power" outputs
power.extend_inputs(custom_power.all_outputs())
signoff.extend_inputs(netlist_fixing.all_outputs())
# Your comment here.
# FIXME what about gds???
# iflow (flowsetup) setup.tcl includes all files inputs/*.lef maybe
# iflow.extend_inputs( [ "icovl-cells.lef" , "dtcd-cells.lef" ] )
# genlibdb.extend_inputs( genlibdb_constraints.all_outputs() )
# Ouch. iflow and everyone that connects to iflow must also include
# the icovl/dtcd lefs I guess?
pre_flowsetup_followers = [
# iflow, init, power, place, cts, postcts_hold, route, postroute, signoff
iflow,
init # can we get away with this?
]
for step in pre_flowsetup_followers:
step.extend_inputs(
["icovl-cells.lef", "dtcd-cells.lef", "bumpcells.lef"])
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(constraints)
g.add_step(dc)
# pre_flowsetup => iflow
g.add_step(pre_flowsetup)
g.add_step(iflow)
g.add_step(init_fullchip)
g.add_step(init)
# init => init_gdsmerge => init_drc
g.add_step(init_gdsmerge)
g.add_step(init_fill)
g.add_step(init_drc)
g.add_step(power)
g.add_step(custom_power)
g.add_step(place)
g.add_step(route)
g.add_step(netlist_fixing)
g.add_step(signoff)
g.add_step(pt_signoff)
# g.add_step( genlibdb_constraints )
g.add_step(genlibdb)
g.add_step(gdsmerge)
g.add_step(drc)
g.add_step(lvs)
g.add_step(debugcalibre)
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name(adk, dc)
g.connect_by_name(adk, pre_flowsetup)
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, init_gdsmerge)
g.connect_by_name(adk, init_fill)
g.connect_by_name(adk, init_drc)
g.connect_by_name(adk, power)
g.connect_by_name(adk, place)
g.connect_by_name(adk, route)
g.connect_by_name(adk, signoff)
g.connect_by_name(adk, gdsmerge)
g.connect_by_name(adk, drc)
g.connect_by_name(adk, lvs)
g.connect_by_name(rtl, dc)
g.connect_by_name(constraints, dc)
# sr02.2020 b/c now init_fullchip needs io_file from rtl
g.connect_by_name(rtl, init_fullchip)
g.connect_by_name(dc, iflow)
g.connect_by_name(dc, init)
g.connect_by_name(dc, power)
g.connect_by_name(dc, place)
# g.connect_by_name( pre_flowsetup, iflow )
# iflow, init, power, place, cts, postcts_hold, route, postroute, signoff
for step in pre_flowsetup_followers:
g.connect_by_name(pre_flowsetup, step)
g.connect_by_name(iflow, init)
g.connect_by_name(iflow, power)
g.connect_by_name(iflow, place)
g.connect_by_name(iflow, route)
g.connect_by_name(iflow, signoff)
# for step in iflow_followers:
# g.connect_by_name( iflow, step)
g.connect_by_name(init_fullchip, init)
g.connect_by_name(custom_power, power)
# init => init_gdsmerge => init_drc
g.connect_by_name(init, init_gdsmerge)
g.connect_by_name(init_gdsmerge, init_drc)
g.connect(init_gdsmerge.o('design_merged.gds'), init_fill.i('design.gds'))
g.connect_by_name(init, power)
g.connect_by_name(power, place)
g.connect_by_name(place, route)
g.connect_by_name(route, signoff)
g.connect_by_name(signoff, gdsmerge)
g.connect_by_name(signoff, drc)
g.connect_by_name(signoff, lvs)
g.connect_by_name(gdsmerge, drc)
g.connect_by_name(gdsmerge, lvs)
g.connect_by_name(signoff, genlibdb)
g.connect_by_name(adk, genlibdb)
# g.connect_by_name( genlibdb_constraints, genlibdb )
g.connect_by_name(adk, pt_signoff)
g.connect_by_name(signoff, pt_signoff)
g.connect_by_name(adk, debugcalibre)
g.connect_by_name(dc, debugcalibre)
g.connect_by_name(iflow, debugcalibre)
g.connect_by_name(signoff, debugcalibre)
g.connect_by_name(drc, debugcalibre)
g.connect_by_name(lvs, debugcalibre)
# Netlist fixing should be run during signoff
g.connect_by_name(netlist_fixing, signoff)
# yes? no?
# g.connect_by_name( init_drc, debugcalibre )
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params(parameters)
# Default order can be found in e.g.
# mflowgen/steps/cadence-innovus-init/configure.yml
# - main.tcl
# - quality-of-life.tcl
# - floorplan.tcl
# - pin-assignments.tcl
# - make-path-groups.tcl
# - reporting.tcl
# I copied this from someone else, maybe glb_top or something
# Looks like this order deletes pin assignments and adds endcaps/welltaps
# then maybe get clean(er) post-floorplan drc
#
# ?? moved stream-out to *before* alignment-cells so to get pre-icovl gds
# FIXME does this mean we're not checking bump-route DRC?
# Note "route-phy-bumps" explicitly sources a file "analog-bumps/build-phy-nets.tcl"
# 5/2020 moved stream-out to *after* bump routing
init.update_params({
'order': [
'main.tcl',
'quality-of-life.tcl',
'stylus-compatibility-procs.tcl',
'floorplan.tcl',
'io-fillers.tcl',
'attach-results-to-outputs.tcl',
'alignment-cells.tcl',
'analog-bumps/route-phy-bumps.tcl',
'analog-bumps/bump-connect.tcl',
'gen-bumps.tcl',
'check-bumps.tcl',
'route-bumps.tcl',
'innovus-foundation-flow/custom-scripts/stream-out.tcl',
]
})
order = power.get_param('order')
order.append('add-endcaps-welltaps.tcl')
power.update_params({'order': order})
# Signoff Order
order = signoff.get_param('order')
index = order.index(
'generate-results.tcl') # Fix netlist before streaming out netlist
order.insert(index, 'netlist-fixing.tcl')
signoff.update_params({'order': order})
# Not sure what this is or why it was commented out...
# # Adding new input for genlibdb node to run
# genlibdb.update_params(
# {'order': "\"read_design.tcl genlibdb-constraints.tcl extract_model.tcl\""}
# )
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'view-standard'
if which("calibre") is not None:
drc_rule_deck = 'calibre-drc-chip.rule'
antenna_drc_rule_deck = 'calibre-drc-antenna.rule'
power_drc_rule_deck = 'calibre-drc-block.rule'
else:
drc_rule_deck = 'pegasus-drc-chip.rule'
antenna_drc_rule_deck = 'pegasus-drc-antenna.rule'
power_drc_rule_deck = 'pegasus-drc-block.rule'
parameters = {
'construct_path': __file__,
'design_name': 'GarnetSOC_pad_frame',
'clock_period': 1.3,
'adk': adk_name,
'adk_view': adk_view,
# Synthesis
'flatten_effort': 0,
'topographical': True,
# RTL Generation
'array_width': 32,
'array_height': 16,
'num_glb_tiles': 16,
'interconnect_only': False,
# glb tile memory size (unit: KB)
# 'glb_tile_mem_size' : 64, # 64x16 => 1M global buffer
'glb_tile_mem_size': 256, # 256*16 => 4M global buffer
# Power Domains
'PWR_AWARE': True,
# Include Garnet?
'soc_only': False,
# Include SoC core? (use 0 for false, 1 for true)
'include_core': 1,
# Include sealring?
'include_sealring': True,
# SRAM macros
'num_words': 2048,
'word_size': 64,
'mux_size': 8,
'corner': "tt0p8v25c",
'partial_write': True,
# Dragonphy
'dragonphy_rdl_x': '613.565u',
'dragonphy_rdl_y': '3901.872u',
# Low Effort flow
'express_flow': False,
'skip_verify_connectivity': True,
# Hold fixing
'signoff_engine': True,
'hold_target_slack': 0.060,
# LVS
# - need lvs2 because dragonphy uses LVT cells
'lvs_extra_spice_include': 'inputs/adk_lvs2/*.cdl',
'lvs_hcells_file': 'inputs/adk/hcells.inc',
'lvs_connect_names': '"VDD VSS VDDPST"',
'lvs_verify_netlist': 0,
# TSMC16 support for LVS - need lvs2 because dragonphy uses LVT cells
'adk_view_lvs2': 'multivt',
# TLX Ports Partitions
'TLX_FWD_DATA_LO_WIDTH': 16,
'TLX_REV_DATA_LO_WIDTH': 45,
# DRC rule deck
'drc_rule_deck': drc_rule_deck,
'antenna_drc_rule_deck': antenna_drc_rule_deck,
'power_drc_rule_deck': power_drc_rule_deck,
'nthreads': 16,
# Testbench
'cgra_apps': ["tests/conv_1_2", "tests/conv_2_1"]
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/../common/rtl')
soc_rtl = Step(this_dir + '/../common/soc-rtl-v2')
gen_sram = Step(this_dir + '/../common/gen_sram_macro')
constraints = Step(this_dir + '/constraints')
read_design = Step(this_dir + '/../common/fc-custom-read-design')
custom_init = Step(this_dir + '/custom-init')
custom_lvs = Step(this_dir + '/custom-lvs-rules')
custom_power = Step(this_dir + '/../common/custom-power-chip')
init_fc = Step(this_dir + '/../common/init-fullchip')
io_file = Step(this_dir + '/io_file')
pre_route = Step(this_dir + '/pre-route')
sealring = Step(this_dir + '/sealring')
netlist_fixing = Step(this_dir + '/../common/fc-netlist-fixing')
# Block-level designs
tile_array = Step(this_dir + '/tile_array')
glb_top = Step(this_dir + '/glb_top')
global_controller = Step(this_dir + '/global_controller')
dragonphy = Step(this_dir + '/dragonphy')
# CGRA simulation
cgra_rtl_sim_compile = Step(this_dir + '/cgra_rtl_sim_compile')
cgra_rtl_sim_run = Step(this_dir + '/cgra_rtl_sim_run')
cgra_sim_build = Step(this_dir + '/cgra_sim_build')
# cgra_gl_sim_compile = Step( this_dir + '/cgra_gl_sim_compile' )
# cgra_gl_sim_run = Step( this_dir + '/cgra_gl_sim_run' )
# cgra_gl_ptpx = Step( this_dir + '/cgra_gl_ptpx' )
# cgra_rtl_sim_verdict = Step( this_dir + '/cgra_rtl_sim_verdict' )
# cgra_gl_sim_verdict = Step( this_dir + '/cgra_gl_sim_verdict' )
# Default steps
info = Step('info', default=True)
#constraints = Step( 'constraints', default=True )
synth = Step('cadence-genus-synthesis', default=True)
iflow = Step('cadence-innovus-flowsetup', default=True)
init = Step('cadence-innovus-init', default=True)
power = Step('cadence-innovus-power', default=True)
place = Step('cadence-innovus-place', default=True)
cts = Step('cadence-innovus-cts', default=True)
postcts_hold = Step('cadence-innovus-postcts_hold', default=True)
route = Step('cadence-innovus-route', default=True)
postroute = Step('cadence-innovus-postroute', default=True)
postroute_hold = Step('cadence-innovus-postroute_hold', default=True)
signoff = Step('cadence-innovus-signoff', default=True)
pt_signoff = Step('synopsys-pt-timing-signoff', default=True)
if which("calibre") is not None:
drc = Step('mentor-calibre-drc', default=True)
lvs = Step('mentor-calibre-lvs', default=True)
merge_rdl = Step('mentor-calibre-gdsmerge-child', default=True)
fill = Step('mentor-calibre-fill', default=True)
merge_fill = Step('mentor-calibre-gdsmerge-child', default=True)
else:
drc = Step('cadence-pegasus-drc', default=True)
lvs = Step('cadence-pegasus-lvs', default=True)
merge_rdl = Step('cadence-pegasus-gdsmerge-child', default=True)
fill = Step('cadence-pegasus-fill', default=True)
merge_fill = Step('cadence-pegasus-gdsmerge-child', default=True)
debugcalibre = Step('cadence-innovus-debug-calibre', default=True)
merge_rdl.set_name('gdsmerge-dragonphy-rdl')
merge_fill.set_name('gdsmerge-fill')
# Send in the clones
# 'power' step now gets its own design-rule check
power_drc = drc.clone()
power_drc.set_name('power-drc')
# Antenna DRC Check
antenna_drc = drc.clone()
antenna_drc.set_name('antenna-drc')
# Add cgra tile macro inputs to downstream nodes
synth.extend_inputs(['tile_array_tt.lib', 'tile_array.lef'])
synth.extend_inputs(['glb_top_tt.lib', 'glb_top.lef'])
synth.extend_inputs(['global_controller_tt.lib', 'global_controller.lef'])
synth.extend_inputs(['sram_tt.lib', 'sram.lef'])
synth.extend_inputs(['dragonphy_top.lef'])
# Exclude dragonphy_top from synth inputs to prevent floating
# dragonphy inputs from being tied to 0
pt_signoff.extend_inputs(['tile_array_tt.db'])
pt_signoff.extend_inputs(['glb_top_tt.db'])
pt_signoff.extend_inputs(['global_controller_tt.db'])
pt_signoff.extend_inputs(['sram_tt.db'])
pt_signoff.extend_inputs(['dragonphy_top_tt.db'])
route.extend_inputs(['pre-route.tcl'])
signoff.extend_inputs(sealring.all_outputs())
signoff.extend_inputs(netlist_fixing.all_outputs())
# These steps need timing info for cgra tiles
hier_steps = \
[ iflow, init, power, place, cts, postcts_hold,
route, postroute, signoff]
for step in hier_steps:
step.extend_inputs(['tile_array_tt.lib', 'tile_array.lef'])
step.extend_inputs(['glb_top_tt.lib', 'glb_top.lef'])
step.extend_inputs(
['global_controller_tt.lib', 'global_controller.lef'])
step.extend_inputs(['sram_tt.lib', 'sram.lef'])
step.extend_inputs(['dragonphy_top_tt.lib', 'dragonphy_top.lef'])
step.extend_inputs(['dragonphy_RDL.lef'])
# Need all block gds's to merge into the final layout
gdsmerge_nodes = [signoff, power]
for node in gdsmerge_nodes:
node.extend_inputs(['tile_array.gds'])
node.extend_inputs(['glb_top.gds'])
node.extend_inputs(['global_controller.gds'])
node.extend_inputs(['sram.gds'])
node.extend_inputs(['dragonphy_top.gds'])
node.extend_inputs(['dragonphy_RDL.gds'])
# Need extracted spice files for both tile types to do LVS
lvs.extend_inputs(['tile_array.lvs.v'])
lvs.extend_inputs(['tile_array.sram.spi'])
lvs.extend_inputs(['glb_top.lvs.v'])
lvs.extend_inputs(['glb_top.sram.spi'])
lvs.extend_inputs(['global_controller.lvs.v'])
lvs.extend_inputs(['sram.spi'])
lvs.extend_inputs(['dragonphy_top.spi'])
lvs.extend_inputs(['adk_lvs2'])
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs(custom_init.all_outputs())
init.extend_inputs(init_fc.all_outputs())
power.extend_inputs(custom_power.all_outputs())
synth.extend_inputs(soc_rtl.all_outputs())
synth.extend_inputs(read_design.all_outputs())
synth.extend_inputs(["cons_scripts"])
power.extend_outputs(["design-merged.gds"])
if parameters['interconnect_only'] is False:
rtl.extend_outputs(['header'])
rtl.extend_postconditions(["assert File( 'outputs/header' ) "])
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(soc_rtl)
g.add_step(gen_sram)
g.add_step(tile_array)
g.add_step(glb_top)
g.add_step(global_controller)
g.add_step(dragonphy)
g.add_step(constraints)
g.add_step(read_design)
g.add_step(synth)
g.add_step(iflow)
g.add_step(init)
g.add_step(init_fc)
g.add_step(io_file)
g.add_step(custom_init)
g.add_step(power)
g.add_step(custom_power)
g.add_step(place)
g.add_step(cts)
g.add_step(postcts_hold)
g.add_step(pre_route)
g.add_step(route)
g.add_step(postroute)
g.add_step(postroute_hold)
g.add_step(sealring)
g.add_step(netlist_fixing)
g.add_step(signoff)
g.add_step(pt_signoff)
g.add_step(merge_rdl)
g.add_step(fill)
g.add_step(merge_fill)
g.add_step(drc)
g.add_step(antenna_drc)
g.add_step(lvs)
g.add_step(custom_lvs)
g.add_step(debugcalibre)
# Post-Power DRC check
g.add_step(power_drc)
# App test nodes
g.add_step(cgra_rtl_sim_compile)
g.add_step(cgra_sim_build)
g.add_step(cgra_rtl_sim_run)
# g.add_step( cgra_gl_sim_compile )
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name(adk, gen_sram)
g.connect_by_name(adk, synth)
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, power)
g.connect_by_name(adk, place)
g.connect_by_name(adk, cts)
g.connect_by_name(adk, postcts_hold)
g.connect_by_name(adk, route)
g.connect_by_name(adk, postroute)
g.connect_by_name(adk, postroute_hold)
g.connect_by_name(adk, signoff)
g.connect_by_name(adk, merge_rdl)
g.connect_by_name(adk, fill)
g.connect_by_name(adk, merge_fill)
g.connect_by_name(adk, drc)
g.connect_by_name(adk, antenna_drc)
g.connect_by_name(adk, lvs)
# Post-Power DRC check
g.connect_by_name(adk, power_drc)
# Connect RTL verification nodes
g.connect_by_name(rtl, cgra_rtl_sim_compile)
g.connect_by_name(cgra_sim_build, cgra_rtl_sim_run)
g.connect_by_name(cgra_rtl_sim_compile, cgra_rtl_sim_run)
# Connect GL verification nodes
# g.connect_by_name( signoff, cgra_gl_sim_compile )
# All of the blocks within this hierarchical design
# Skip these if we're doing soc_only
if parameters['soc_only'] == False:
blocks = [tile_array, glb_top, global_controller, dragonphy]
for block in blocks:
g.connect_by_name(block, synth)
g.connect_by_name(block, iflow)
g.connect_by_name(block, init)
g.connect_by_name(block, power)
g.connect_by_name(block, place)
g.connect_by_name(block, cts)
g.connect_by_name(block, postcts_hold)
g.connect_by_name(block, route)
g.connect_by_name(block, postroute)
g.connect_by_name(block, postroute_hold)
g.connect_by_name(block, signoff)
g.connect_by_name(block, pt_signoff)
g.connect_by_name(block, drc)
g.connect_by_name(block, lvs)
# Tile_array can use rtl from rtl node
g.connect_by_name(rtl, tile_array)
# glb_top can use rtl from rtl node
g.connect_by_name(rtl, glb_top)
# global_controller can use rtl from rtl node
g.connect_by_name(rtl, global_controller)
g.connect_by_name(rtl, synth)
g.connect_by_name(soc_rtl, synth)
g.connect_by_name(constraints, synth)
g.connect_by_name(read_design, synth)
g.connect_by_name(soc_rtl, io_file)
g.connect_by_name(synth, iflow)
g.connect_by_name(synth, init)
g.connect_by_name(synth, power)
g.connect_by_name(synth, place)
g.connect_by_name(synth, cts)
g.connect_by_name(iflow, init)
g.connect_by_name(iflow, power)
g.connect_by_name(iflow, place)
g.connect_by_name(iflow, cts)
g.connect_by_name(iflow, postcts_hold)
g.connect_by_name(iflow, route)
g.connect_by_name(iflow, postroute)
g.connect_by_name(iflow, postroute_hold)
g.connect_by_name(iflow, signoff)
g.connect_by_name(custom_init, init)
g.connect_by_name(custom_lvs, lvs)
g.connect_by_name(custom_power, power)
# SRAM macro
g.connect_by_name(gen_sram, synth)
g.connect_by_name(gen_sram, iflow)
g.connect_by_name(gen_sram, init)
g.connect_by_name(gen_sram, power)
g.connect_by_name(gen_sram, place)
g.connect_by_name(gen_sram, cts)
g.connect_by_name(gen_sram, postcts_hold)
g.connect_by_name(gen_sram, route)
g.connect_by_name(gen_sram, postroute)
g.connect_by_name(gen_sram, postroute_hold)
g.connect_by_name(gen_sram, signoff)
g.connect_by_name(gen_sram, pt_signoff)
g.connect_by_name(gen_sram, drc)
g.connect_by_name(gen_sram, lvs)
# Full chip floorplan stuff
g.connect_by_name(io_file, init_fc)
g.connect_by_name(init_fc, init)
g.connect_by_name(init, power)
g.connect_by_name(power, place)
g.connect_by_name(place, cts)
g.connect_by_name(cts, postcts_hold)
g.connect_by_name(postcts_hold, route)
g.connect_by_name(route, postroute)
g.connect_by_name(postroute, postroute_hold)
g.connect_by_name(postroute_hold, signoff)
g.connect_by_name(signoff, lvs)
g.connect(signoff.o('design-merged.gds'), drc.i('design_merged.gds'))
g.connect(signoff.o('design-merged.gds'), lvs.i('design_merged.gds'))
# Skipping
g.connect(signoff.o('design-merged.gds'), merge_rdl.i('design.gds'))
g.connect(dragonphy.o('dragonphy_RDL.gds'), merge_rdl.i('child.gds'))
g.connect_by_name(merge_rdl, lvs)
# Run Fill on merged GDS
g.connect(merge_rdl.o('design_merged.gds'), fill.i('design.gds'))
# Merge fill
g.connect(merge_rdl.o('design_merged.gds'), merge_fill.i('design.gds'))
g.connect(fill.o('fill.gds'), merge_fill.i('child.gds'))
# Run DRC on merged and filled gds
g.connect_by_name(merge_fill, drc)
g.connect_by_name(merge_fill, antenna_drc)
g.connect_by_name(adk, pt_signoff)
g.connect_by_name(signoff, pt_signoff)
g.connect_by_name(adk, debugcalibre)
g.connect_by_name(synth, debugcalibre)
g.connect_by_name(iflow, debugcalibre)
g.connect_by_name(signoff, debugcalibre)
g.connect_by_name(drc, debugcalibre)
g.connect_by_name(lvs, debugcalibre)
g.connect_by_name(pre_route, route)
g.connect_by_name(sealring, signoff)
g.connect_by_name(netlist_fixing, signoff)
# Post-Power DRC
g.connect(power.o('design-merged.gds'), power_drc.i('design_merged.gds'))
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
# Allow user to override parms with env in a limited sort of way
parameters = sr_override_parms(parameters)
print(f'parameters["hold_target_slack"]={parameters["hold_target_slack"]}')
g.update_params(parameters)
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
# DC needs these param to set the NO_CGRA macro
synth.update_params({'soc_only': parameters['soc_only']}, True)
# DC needs these params to set macros in soc rtl
synth.update_params(
{'TLX_FWD_DATA_LO_WIDTH': parameters['TLX_FWD_DATA_LO_WIDTH']}, True)
synth.update_params(
{'TLX_REV_DATA_LO_WIDTH': parameters['TLX_REV_DATA_LO_WIDTH']}, True)
init.update_params({'soc_only': parameters['soc_only']}, True)
init.update_params({
'order': [
'main.tcl', 'quality-of-life.tcl',
'stylus-compatibility-procs.tcl', 'floorplan.tcl',
'io-fillers.tcl', 'alignment-cells.tcl',
'analog-bumps/route-phy-bumps.tcl',
'analog-bumps/bump-connect.tcl', 'gen-bumps.tcl',
'check-bumps.tcl', 'route-bumps.tcl', 'place-macros.tcl',
'dont-touch.tcl'
]
})
# glb_top parameters update
glb_top.update_params({'array_width': parameters['array_width']}, True)
glb_top.update_params(
{'glb_tile_mem_size': parameters['glb_tile_mem_size']}, True)
glb_top.update_params({'num_glb_tiles': parameters['num_glb_tiles']}, True)
# App test parameters update
cgra_rtl_sim_compile.update_params(
{'array_width': parameters['array_width']}, True)
cgra_rtl_sim_compile.update_params(
{'array_height': parameters['array_height']}, True)
cgra_rtl_sim_compile.update_params(
{'clock_period': parameters['clock_period']}, True)
cgra_rtl_sim_compile.update_params(
{'glb_tile_mem_size': parameters['glb_tile_mem_size']}, True)
cgra_rtl_sim_run.update_params({'cgra_apps': parameters['cgra_apps']},
True)
# Power node order manipulation
order = power.get_param('order')
# Move endcap/welltap insertion to end of power step to improve runtime
order.append('add-endcaps-welltaps.tcl')
# Stream out post-power GDS so that we can run DRC here
order.append('innovus-foundation-flow/custom-scripts/stream-out.tcl')
order.append('attach-results-to-outputs.tcl')
power.update_params({'order': order})
# Add pre-route plugin to insert skip_routing commands
order = route.get_param('order')
order.insert(0, 'pre-route.tcl')
route.update_params({'order': order})
# Signoff order additions
order = signoff.get_param('order')
# Add sealring at beginning of signoff, so it's in before we stream out GDS
if parameters['include_sealring'] == True:
order.insert(0, 'add-sealring.tcl')
# Add netlist-fixing script before we save new netlist
index = order.index('generate-results.tcl')
order.insert(index, 'netlist-fixing.tcl')
signoff.update_params({'order': order})
merge_rdl.update_params({
'coord_x': parameters['dragonphy_rdl_x'],
'coord_y': parameters['dragonphy_rdl_y'],
'flatten_child': True,
'design_top_cell': parameters['design_name'],
'child_top_cell': 'dragonphy_RDL'
})
merge_fill.update_params({
'design_top_cell':
parameters['design_name'],
'child_top_cell':
f"{parameters['design_name']}_F16a"
})
# Antenna DRC node needs to use antenna rule deck
antenna_drc.update_params(
{'drc_rule_deck': parameters['antenna_drc_rule_deck']})
# Power DRC node should use block level rule deck to improve runtimes and not report false errors
power_drc.update_params(
{'drc_rule_deck': parameters['power_drc_rule_deck']})
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'stdview'
pwr_aware = True
parameters = {
'construct_path' : __file__,
'design_name' : 'Tile_PE',
'clock_period' : 1.1,
'adk' : adk_name,
'adk_view' : adk_view,
# Synthesis
'flatten_effort' : 3,
'topographical' : True,
# RTL Generation
'interconnect_only' : True,
# Power Domains
'PWR_AWARE' : pwr_aware
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname( os.path.abspath( __file__ ) )
# ADK step
g.set_adk( adk_name )
adk = g.get_adk_step()
# Custom steps
rtl = Step( this_dir + '/../common/rtl' )
constraints = Step( this_dir + '/constraints' )
custom_init = Step( this_dir + '/custom-init' )
custom_power = Step( this_dir + '/../common/custom-power-leaf' )
genlibdb_constraints = Step( this_dir + '/../common/custom-genlibdb-constraints' )
custom_timing_assert = Step( this_dir + '/../common/custom-timing-assert' )
custom_dc_scripts = Step( this_dir + '/custom-dc-scripts' )
iflow = Step( this_dir + '/cadence-innovus-flowsetup' )
# Power aware setup
if pwr_aware:
power_domains = Step( this_dir + '/../common/power-domains' )
pwr_aware_gls = Step( this_dir + '/../common/pwr-aware-gls' )
# Default steps
info = Step( 'info', default=True )
#constraints = Step( 'constraints', default=True )
dc = Step( 'synopsys-dc-synthesis', default=True )
#iflow = Step( 'cadence-innovus-flowsetup', default=True )
init = Step( 'cadence-innovus-init', default=True )
power = Step( 'cadence-innovus-power', default=True )
place = Step( 'cadence-innovus-place', default=True )
cts = Step( 'cadence-innovus-cts', default=True )
postcts_hold = Step( 'cadence-innovus-postcts_hold', default=True )
route = Step( 'cadence-innovus-route', default=True )
postroute = Step( 'cadence-innovus-postroute', default=True )
signoff = Step( 'cadence-innovus-signoff', default=True )
pt_signoff = Step( 'synopsys-pt-timing-signoff', default=True )
genlibdb = Step( 'synopsys-ptpx-genlibdb', default=True )
gdsmerge = Step( 'mentor-calibre-gdsmerge', default=True )
drc = Step( 'mentor-calibre-drc', default=True )
lvs = Step( 'mentor-calibre-lvs', default=True )
debugcalibre = Step( 'cadence-innovus-debug-calibre', default=True )
# Add custom timing scripts
custom_timing_steps = [ dc, postcts_hold, signoff ] # connects to these
for c_step in custom_timing_steps:
c_step.extend_inputs( custom_timing_assert.all_outputs() )
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs( custom_init.all_outputs() )
power.extend_inputs( custom_power.all_outputs() )
genlibdb.extend_inputs( genlibdb_constraints.all_outputs() )
# Extra input to DC for constraints
dc.extend_inputs( ["common.tcl", "reporting.tcl", "generate-results.tcl", "scenarios.tcl"] )
# Extra outputs from DC
dc.extend_outputs( ["sdc"] )
iflow.extend_inputs( ["scenarios.tcl", "sdc"] )
init.extend_inputs( ["sdc"] )
power.extend_inputs( ["sdc"] )
place.extend_inputs( ["sdc"] )
cts.extend_inputs( ["sdc"] )
# Power aware setup
if pwr_aware:
dc.extend_inputs(['designer-interface.tcl', 'upf_Tile_PE.tcl', 'pe-constraints.tcl', 'pe-constraints-2.tcl', 'dc-dont-use-constraints.tcl'])
init.extend_inputs(['upf_Tile_PE.tcl', 'pe-load-upf.tcl', 'dont-touch-constraints.tcl', 'pd-pe-floorplan.tcl', 'pe-add-endcaps-welltaps-setup.tcl', 'pd-add-endcaps-welltaps.tcl', 'pe-power-switches-setup.tcl', 'add-power-switches.tcl', 'check-clamp-logic-structure.tcl'])
place.extend_inputs(['place-dont-use-constraints.tcl', 'check-clamp-logic-structure.tcl'])
power.extend_inputs(['pd-globalnetconnect.tcl'] )
cts.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'])
postcts_hold.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'] )
route.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'] )
postroute.extend_inputs(['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'] )
signoff.extend_inputs(['conn-aon-cells-vdd.tcl', 'pd-generate-lvs-netlist.tcl', 'check-clamp-logic-structure.tcl'] )
pwr_aware_gls.extend_inputs(['design.vcs.pg.v'])
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step( info )
g.add_step( rtl )
g.add_step( constraints )
g.add_step( custom_dc_scripts )
g.add_step( dc )
g.add_step( custom_timing_assert )
g.add_step( iflow )
g.add_step( init )
g.add_step( custom_init )
g.add_step( power )
g.add_step( custom_power )
g.add_step( place )
g.add_step( cts )
g.add_step( postcts_hold )
g.add_step( route )
g.add_step( postroute )
g.add_step( signoff )
g.add_step( pt_signoff )
g.add_step( genlibdb_constraints )
g.add_step( genlibdb )
g.add_step( gdsmerge )
g.add_step( drc )
g.add_step( lvs )
g.add_step( debugcalibre )
# Power aware step
if pwr_aware:
g.add_step( power_domains )
g.add_step( pwr_aware_gls )
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name( adk, dc )
g.connect_by_name( adk, iflow )
g.connect_by_name( adk, init )
g.connect_by_name( adk, power )
g.connect_by_name( adk, place )
g.connect_by_name( adk, cts )
g.connect_by_name( adk, postcts_hold )
g.connect_by_name( adk, route )
g.connect_by_name( adk, postroute )
g.connect_by_name( adk, signoff )
g.connect_by_name( adk, gdsmerge )
g.connect_by_name( adk, drc )
g.connect_by_name( adk, lvs )
g.connect_by_name( rtl, dc )
g.connect_by_name( constraints, dc )
g.connect_by_name( custom_dc_scripts, dc )
g.connect_by_name( constraints, iflow )
g.connect_by_name( custom_dc_scripts, iflow)
for c_step in custom_timing_steps:
g.connect_by_name( custom_timing_assert, c_step )
g.connect_by_name( dc, iflow )
g.connect_by_name( dc, init )
g.connect_by_name( dc, power )
g.connect_by_name( dc, place )
g.connect_by_name( dc, cts )
g.connect_by_name( iflow, init )
g.connect_by_name( iflow, power )
g.connect_by_name( iflow, place )
g.connect_by_name( iflow, cts )
g.connect_by_name( iflow, postcts_hold )
g.connect_by_name( iflow, route )
g.connect_by_name( iflow, postroute )
g.connect_by_name( iflow, signoff )
g.connect_by_name( custom_init, init )
g.connect_by_name( custom_power, power )
g.connect_by_name( init, power )
g.connect_by_name( power, place )
g.connect_by_name( place, cts )
g.connect_by_name( cts, postcts_hold )
g.connect_by_name( postcts_hold, route )
g.connect_by_name( route, postroute )
g.connect_by_name( postroute, signoff )
g.connect_by_name( signoff, gdsmerge )
g.connect_by_name( signoff, drc )
g.connect_by_name( signoff, lvs )
g.connect_by_name( gdsmerge, drc )
g.connect_by_name( gdsmerge, lvs )
g.connect_by_name( signoff, genlibdb )
g.connect_by_name( adk, genlibdb )
g.connect_by_name( genlibdb_constraints, genlibdb )
g.connect_by_name( adk, pt_signoff )
g.connect_by_name( signoff, pt_signoff )
g.connect_by_name( adk, debugcalibre )
g.connect_by_name( dc, debugcalibre )
g.connect_by_name( iflow, debugcalibre )
g.connect_by_name( signoff, debugcalibre )
g.connect_by_name( drc, debugcalibre )
g.connect_by_name( lvs, debugcalibre )
# Pwr aware steps:
if pwr_aware:
g.connect_by_name( power_domains, dc )
g.connect_by_name( power_domains, init )
g.connect_by_name( power_domains, power )
g.connect_by_name( power_domains, place )
g.connect_by_name( power_domains, cts )
g.connect_by_name( power_domains, postcts_hold )
g.connect_by_name( power_domains, route )
g.connect_by_name( power_domains, postroute )
g.connect_by_name( power_domains, signoff )
g.connect_by_name( adk, pwr_aware_gls)
g.connect_by_name( signoff, pwr_aware_gls)
#g.connect(power_domains.o('pd-globalnetconnect.tcl'), power.i('globalnetconnect.tcl'))
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params( parameters )
# Add custom timing scripts
for c_step in custom_timing_steps:
order = c_step.get_param( 'order' )
order.append( 'report-special-timing.tcl' )
c_step.set_param( 'order', order )
c_step.extend_postconditions( [{ 'pytest': 'inputs/test_timing.py' }] )
# Update PWR_AWARE variable
dc.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, True )
init.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, True )
power.update_params( { 'PWR_AWARE': parameters['PWR_AWARE'] }, True )
if pwr_aware:
init.update_params( { 'flatten_effort': parameters['flatten_effort'] }, True )
pwr_aware_gls.update_params( { 'design_name': parameters['design_name'] }, True )
init.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
place.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
cts.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
postcts_hold.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
route.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
postroute.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
signoff.extend_postconditions( ["assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"] )
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
# init -- Add 'edge-blockages.tcl' after 'pin-assignments.tcl'
# and 'additional-path-groups' after 'make_path_groups'
order = init.get_param('order') # get the default script run order
path_group_idx = order.index( 'make-path-groups.tcl' )
order.insert( path_group_idx + 1, 'additional-path-groups.tcl' )
pin_idx = order.index( 'pin-assignments.tcl' ) # find pin-assignments.tcl
order.insert( pin_idx + 1, 'edge-blockages.tcl' ) # add here
init.update_params( { 'order': order } )
# Adding new input for genlibdb node to run
order = genlibdb.get_param('order') # get the default script run order
read_idx = order.index( 'read_design.tcl' ) # find read_design.tcl
order.insert( read_idx + 1, 'genlibdb-constraints.tcl' ) # add here
genlibdb.update_params( { 'order': order } )
# Pwr aware steps:
if pwr_aware:
# init node
order = init.get_param('order')
read_idx = order.index( 'floorplan.tcl' ) # find floorplan.tcl
order.insert( read_idx + 1, 'pe-load-upf.tcl' ) # add here
order.insert( read_idx + 2, 'pd-pe-floorplan.tcl' ) # add here
order.insert( read_idx + 3, 'pe-add-endcaps-welltaps-setup.tcl' ) # add here
order.insert( read_idx + 4, 'pd-add-endcaps-welltaps.tcl' ) # add here
order.insert( read_idx + 5, 'pe-power-switches-setup.tcl') # add here
order.insert( read_idx + 6, 'add-power-switches.tcl' ) # add here
order.remove('add-endcaps-welltaps.tcl')
order.append('check-clamp-logic-structure.tcl')
init.update_params( { 'order': order } )
# power node
order = power.get_param('order')
order.insert( 0, 'pd-globalnetconnect.tcl' ) # add here
order.remove('globalnetconnect.tcl')
power.update_params( { 'order': order } )
# place node
order = place.get_param('order')
read_idx = order.index( 'main.tcl' ) # find main.tcl
order.insert(read_idx - 1, 'place-dont-use-constraints.tcl')
order.append('check-clamp-logic-structure.tcl')
place.update_params( { 'order': order } )
# cts node
order = cts.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
cts.update_params( { 'order': order } )
# postcts_hold node
order = postcts_hold.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
postcts_hold.update_params( { 'order': order } )
# route node
order = route.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
route.update_params( { 'order': order } )
# postroute node
order = postroute.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
order.append('check-clamp-logic-structure.tcl')
postroute.update_params( { 'order': order } )
# signoff node
order = signoff.get_param('order')
order.insert( 0, 'conn-aon-cells-vdd.tcl' ) # add here
read_idx = order.index( 'generate-results.tcl' ) # find generate_results.tcl
order.insert(read_idx + 1, 'pd-generate-lvs-netlist.tcl')
order.append('check-clamp-logic-structure.tcl')
signoff.update_params( { 'order': order } )
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'stdview'
parameters = {
'construct_path': __file__,
'design_name': 'pad_frame',
'clock_period': 20.0,
'adk': adk_name,
'adk_view': adk_view,
#
# Synthesis
'flatten_effort': 3,
'topographical': False,
#
# drc
# drc_rule_deck: /sim/steveri/runsets/ruleset_icovl # NO GOOD instead do:
# cd ../adks/tsmc16-adk/stdview; ln -s /sim/steveri/runsets/ruleset_icovl
'drc_rule_deck': 'ruleset_icovl',
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/rtl')
constraints = Step(this_dir + '/constraints')
init_fullchip = Step(this_dir + '/../common/init-fullchip')
# # More custom steps: custom power step (unused)
# custom_power = Step( this_dir + '/../common/custom-power-leaf' )
# Some kinda primetime thingy maybe - not using it
# genlibdb_constraints = Step( this_dir + '/../common/custom-genlibdb-constraints' )
# Default steps
info = Step('info', default=True)
# constraints= Step( 'constraints', default=True )
dc = Step('synopsys-dc-synthesis', default=True)
iflow = Step('cadence-innovus-flowsetup', default=True)
init = Step('cadence-innovus-init', default=True)
# power = Step( 'cadence-innovus-power', default=True )
# place = Step( 'cadence-innovus-place', default=True )
# cts = Step( 'cadence-innovus-cts', default=True )
# postcts_hold = Step( 'cadence-innovus-postcts_hold', default=True )
# route = Step( 'cadence-innovus-route', default=True )
# postroute = Step( 'cadence-innovus-postroute', default=True )
# signoff = Step( 'cadence-innovus-signoff', default=True )
# pt_signoff = Step( 'synopsys-pt-timing-signoff', default=True )
# genlibdb = Step( 'synopsys-ptpx-genlibdb', default=True )
gdsmerge = Step('mentor-calibre-gdsmerge', default=True)
if which("calibre") is not None:
drc = Step('mentor-calibre-drc', default=True)
else:
drc = Step('cadence-pegasus-drc', default=True)
# lvs = Step( 'mentor-calibre-lvs', default=True )
# debugcalibre = Step( 'cadence-innovus-debug-calibre', default=True )
# Send in the clones
# "init" now builds a gds file for its own drc check "drc_icovl";
# so need a gdsmerge step between the two
init_gdsmerge = gdsmerge.clone()
init_gdsmerge.set_name('init-gdsmerge')
# icovl design-rule check runs after 'init' step
drc_icovl = drc.clone()
drc_icovl.set_name('drc-icovl')
#-----------------------------------------------------------------------
# Add extra input edges to innovus steps that need custom tweaks
#-----------------------------------------------------------------------
# "init" (cadence-innovus-init) inputs are "init_fullchip" outputs
init.extend_inputs(init_fullchip.all_outputs())
# Also: 'init' now produces a gds file
# for intermediate drc check 'drc-icovl'
# by way of intermediate gdsmerge step "init-gdsmerge"
init.extend_outputs(["design.gds.gz"])
# # "power" inputs are "custom_power" outputs
# power.extend_inputs( custom_power.all_outputs() )
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(constraints)
g.add_step(dc)
# pre_flowsetup => iflow
# g.add_step( pre_flowsetup )
g.add_step(iflow)
g.add_step(init_fullchip)
g.add_step(init)
# init => init_gdsmerge => drc_icovl
g.add_step(init_gdsmerge)
g.add_step(drc_icovl)
# g.add_step( power )
# g.add_step( custom_power )
# g.add_step( place )
# g.add_step( cts )
# g.add_step( postcts_hold )
# g.add_step( route )
# g.add_step( postroute )
# g.add_step( signoff )
# g.add_step( pt_signoff )
# # g.add_step( genlibdb_constraints )
# g.add_step( genlibdb )
# g.add_step( gdsmerge )
# g.add_step( drc )
# g.add_step( lvs )
# g.add_step( debugcalibre )
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name(adk, dc)
# g.connect_by_name( adk, pre_flowsetup )
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, init_gdsmerge)
g.connect_by_name(adk, drc_icovl)
# g.connect_by_name( adk, power )
# g.connect_by_name( adk, place )
# g.connect_by_name( adk, cts )
# g.connect_by_name( adk, postcts_hold )
# g.connect_by_name( adk, route )
# g.connect_by_name( adk, postroute )
# g.connect_by_name( adk, signoff )
# g.connect_by_name( adk, gdsmerge )
# g.connect_by_name( adk, drc )
# g.connect_by_name( adk, lvs )
g.connect_by_name(rtl, dc)
g.connect_by_name(constraints, dc)
# sr02.2020 b/c now init_fullchip needs io_file from rtl
g.connect_by_name(rtl, init_fullchip)
g.connect_by_name(dc, iflow)
g.connect_by_name(dc, init)
# g.connect_by_name( dc, power )
# g.connect_by_name( dc, place )
# g.connect_by_name( dc, cts )
# Maybe don't need this no more...
# # g.connect_by_name( pre_flowsetup, iflow )
# # iflow, init, power, place, cts, postcts_hold, route, postroute, signoff
# for step in pre_flowsetup_followers:
# g.connect_by_name( pre_flowsetup, step)
g.connect_by_name(iflow, init)
# g.connect_by_name( iflow, power )
# g.connect_by_name( iflow, place )
# g.connect_by_name( iflow, cts )
# g.connect_by_name( iflow, postcts_hold )
# g.connect_by_name( iflow, route )
# g.connect_by_name( iflow, postroute )
# g.connect_by_name( iflow, signoff )
# # for step in iflow_followers:
# # g.connect_by_name( iflow, step)
g.connect_by_name(init_fullchip, init)
# g.connect_by_name( custom_power, power )
# init => init_gdsmerge => drc_icovl
g.connect_by_name(init, init_gdsmerge)
g.connect_by_name(init_gdsmerge, drc_icovl)
# g.connect_by_name( init, power )
# g.connect_by_name( power, place )
# g.connect_by_name( place, cts )
# g.connect_by_name( cts, postcts_hold )
# g.connect_by_name( postcts_hold, route )
# g.connect_by_name( route, postroute )
# g.connect_by_name( postroute, signoff )
# g.connect_by_name( signoff, gdsmerge )
# g.connect_by_name( signoff, drc )
# g.connect_by_name( signoff, lvs )
# g.connect_by_name( gdsmerge, drc )
# g.connect_by_name( gdsmerge, lvs )
# g.connect_by_name( signoff, genlibdb )
# g.connect_by_name( adk, genlibdb )
# # g.connect_by_name( genlibdb_constraints, genlibdb )
# g.connect_by_name( adk, pt_signoff )
# g.connect_by_name( signoff, pt_signoff )
#
# g.connect_by_name( adk, debugcalibre )
# g.connect_by_name( dc, debugcalibre )
# g.connect_by_name( iflow, debugcalibre )
# g.connect_by_name( signoff, debugcalibre )
# g.connect_by_name( drc, debugcalibre )
# g.connect_by_name( lvs, debugcalibre )
# yes? no?
# g.connect_by_name( drc_icovl, debugcalibre )
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params(parameters)
# Default order can be found in e.g.
# mflowgen/steps/cadence-innovus-init/configure.yml
# - main.tcl
# - quality-of-life.tcl
# - floorplan.tcl
# - pin-assignments.tcl
# - make-path-groups.tcl
# - reporting.tcl
# I copied this from someone else, maybe glb_top or something
# Looks like this order deletes pin assignments and adds endcaps/welltaps
# then maybe get clean(er) post-floorplan drc
#
# 3/4 swapped order of streamout/align so to get gds *before* icovl
init.update_params({
'order': [
'main.tcl',
'quality-of-life.tcl',
'stylus-compatibility-procs.tcl',
'floorplan.tcl',
'io-fillers.tcl',
'alignment-cells.tcl',
# Let's try it without the bump routing maybe?
# 'gen-bumps.tcl', 'check-bumps.tcl', 'route-bumps.tcl',
'gen-bumps.tcl',
'sealring.tcl',
'innovus-foundation-flow/custom-scripts/stream-out.tcl',
'attach-results-to-outputs.tcl',
]
})
# Not sure what this is or why it was commented out...
# # Adding new input for genlibdb node to run
# genlibdb.update_params(
# {'order': "\"read_design.tcl genlibdb-constraints.tcl extract_model.tcl\""}
# )
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'multicorner-multivt'
pwr_aware = True
flatten = 3
os_flatten = os.environ.get('FLATTEN')
if os_flatten:
flatten = os_flatten
# RTL power estimation
rtl_power = False
if os.environ.get('RTL_POWER') == 'True':
pwr_aware = False
rtl_power = True
# DC power estimation
synth_power = False
if os.environ.get('SYNTH_POWER') == 'True':
synth_power = True
pwr_aware = False
parameters = {
'construct_path': __file__,
'design_name': 'Tile_PE',
'clock_period': 4, # Change to 250 MHz to match Mem.
'adk': adk_name,
'adk_view': adk_view,
# Synthesis
'flatten_effort': flatten,
'topographical': True,
# RTL Generation
'interconnect_only': True,
# Power Domains
'PWR_AWARE': pwr_aware,
'core_density_target': 0.63,
'saif_instance': 'TilePETb/Tile_PE_inst',
'testbench_name': 'TilePETb',
'strip_path': 'TilePETb/Tile_PE_inst'
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/../common/rtl')
constraints = Step(this_dir + '/constraints')
custom_init = Step(this_dir + '/custom-init')
custom_genus_scripts = Step(this_dir + '/custom-genus-scripts')
custom_flowgen_setup = Step(this_dir + '/custom-flowgen-setup')
custom_power = Step(this_dir + '/../common/custom-power-leaf')
genlibdb_constraints = Step(this_dir +
'/../common/custom-genlibdb-constraints')
custom_timing_assert = Step(this_dir + '/../common/custom-timing-assert')
custom_dc_scripts = Step(this_dir + '/custom-dc-scripts')
testbench = Step(this_dir + '/testbench')
xcelium_sim = Step(this_dir + '/../common/cadence-xcelium-sim')
if rtl_power:
rtl_sim = xcelium_sim.clone()
rtl_sim.set_name('rtl-sim')
pt_power_rtl = Step(this_dir + '/../common/synopsys-ptpx-rtl')
rtl_sim.extend_inputs(testbench.all_outputs())
gl_sim = xcelium_sim.clone()
gl_sim.set_name('gl-sim')
gl_sim.extend_inputs(testbench.all_outputs())
pt_power_gl = Step(this_dir + '/../common/synopsys-ptpx-gl')
parse_power_gl = Step(this_dir + '/parse-power-gl')
if synth_power:
synth_sim = xcelium_sim.clone()
synth_sim.set_name('synth-sim')
synth_sim.extend_inputs(testbench.all_outputs())
synth_sim.extend_inputs(['design.v'])
pt_power_synth = Step(this_dir + '/../common/synopsys-ptpx-synth')
# Power aware setup
power_domains = None
pwr_aware_gls = None
if pwr_aware:
power_domains = Step(this_dir + '/../common/power-domains')
pwr_aware_gls = Step(this_dir + '/../common/pwr-aware-gls')
# Default steps
info = Step('info', default=True)
synth = Step('cadence-genus-synthesis', default=True)
iflow = Step('cadence-innovus-flowsetup', default=True)
if synth_power:
synth.extend_outputs(['design.spef.gz'])
init = Step('cadence-innovus-init', default=True)
power = Step('cadence-innovus-power', default=True)
place = Step('cadence-innovus-place', default=True)
cts = Step('cadence-innovus-cts', default=True)
postcts_hold = Step('cadence-innovus-postcts_hold', default=True)
route = Step('cadence-innovus-route', default=True)
postroute = Step('cadence-innovus-postroute', default=True)
signoff = Step('cadence-innovus-signoff', default=True)
pt_signoff = Step('synopsys-pt-timing-signoff', default=True)
genlibdb = Step('cadence-genus-genlib', default=True)
if which("calibre") is not None:
drc = Step('mentor-calibre-drc', default=True)
lvs = Step('mentor-calibre-lvs', default=True)
else:
drc = Step('cadence-pegasus-drc', default=True)
lvs = Step('cadence-pegasus-lvs', default=True)
debugcalibre = Step('cadence-innovus-debug-calibre', default=True)
# Add custom timing scripts
custom_timing_steps = [synth, postcts_hold, signoff] # connects to these
for c_step in custom_timing_steps:
c_step.extend_inputs(custom_timing_assert.all_outputs())
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs(custom_init.all_outputs())
power.extend_inputs(custom_power.all_outputs())
genlibdb.extend_inputs(genlibdb_constraints.all_outputs())
synth.extend_inputs(custom_genus_scripts.all_outputs())
iflow.extend_inputs(custom_flowgen_setup.all_outputs())
# Extra input to DC for constraints
synth.extend_inputs([
"common.tcl", "reporting.tcl", "generate-results.tcl", "scenarios.tcl",
"report_alu.py", "parse_alu.py"
])
# Extra outputs from DC
synth.extend_outputs(["sdc"])
iflow.extend_inputs(["scenarios.tcl", "sdc"])
init.extend_inputs(["sdc"])
power.extend_inputs(["sdc"])
place.extend_inputs(["sdc"])
cts.extend_inputs(["sdc"])
order = synth.get_param('order')
order.append('copy_sdc.tcl')
synth.set_param('order', order)
# Power aware setup
if pwr_aware:
synth.extend_inputs([
'designer-interface.tcl', 'upf_Tile_PE.tcl', 'pe-constraints.tcl',
'pe-constraints-2.tcl', 'dc-dont-use-constraints.tcl'
])
init.extend_inputs([
'upf_Tile_PE.tcl', 'pe-load-upf.tcl', 'dont-touch-constraints.tcl',
'pd-pe-floorplan.tcl', 'pe-add-endcaps-welltaps-setup.tcl',
'pd-add-endcaps-welltaps.tcl', 'pe-power-switches-setup.tcl',
'add-power-switches.tcl', 'check-clamp-logic-structure.tcl'
])
place.extend_inputs([
'place-dont-use-constraints.tcl', 'check-clamp-logic-structure.tcl'
])
power.extend_inputs(['pd-globalnetconnect.tcl'])
cts.extend_inputs(
['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'])
postcts_hold.extend_inputs(
['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'])
route.extend_inputs(
['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'])
postroute.extend_inputs(
['conn-aon-cells-vdd.tcl', 'check-clamp-logic-structure.tcl'])
signoff.extend_inputs([
'conn-aon-cells-vdd.tcl', 'pd-generate-lvs-netlist.tcl',
'check-clamp-logic-structure.tcl'
])
pwr_aware_gls.extend_inputs(['design.vcs.pg.v'])
gl_sim.extend_inputs(["design.vcs.pg.v"])
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(testbench)
g.add_step(constraints)
g.add_step(custom_dc_scripts)
g.add_step(synth)
g.add_step(custom_timing_assert)
g.add_step(custom_genus_scripts)
g.add_step(iflow)
g.add_step(custom_flowgen_setup)
g.add_step(init)
g.add_step(custom_init)
g.add_step(power)
g.add_step(custom_power)
g.add_step(place)
g.add_step(cts)
g.add_step(postcts_hold)
g.add_step(route)
g.add_step(postroute)
g.add_step(signoff)
g.add_step(pt_signoff)
g.add_step(genlibdb_constraints)
g.add_step(genlibdb)
g.add_step(drc)
g.add_step(lvs)
g.add_step(debugcalibre)
if rtl_power:
g.add_step(rtl_sim)
g.add_step(pt_power_rtl)
g.add_step(gl_sim)
g.add_step(pt_power_gl)
g.add_step(parse_power_gl)
if synth_power:
g.add_step(synth_sim)
g.add_step(pt_power_synth)
# Power aware step
if pwr_aware:
g.add_step(power_domains)
g.add_step(pwr_aware_gls)
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Dynamically add edges
# Connect by name
g.connect_by_name(adk, synth)
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, power)
g.connect_by_name(adk, place)
g.connect_by_name(adk, cts)
g.connect_by_name(adk, postcts_hold)
g.connect_by_name(adk, route)
g.connect_by_name(adk, postroute)
g.connect_by_name(adk, signoff)
g.connect_by_name(adk, drc)
g.connect_by_name(adk, lvs)
g.connect_by_name(adk, pt_power_gl)
if rtl_power:
rtl_sim.extend_inputs(['design.v'])
g.connect_by_name(adk, rtl_sim)
g.connect_by_name(adk, pt_power_rtl)
# To generate namemap
g.connect_by_name(rtl_sim, dc) # run.saif
g.connect_by_name(rtl, rtl_sim) # design.v
g.connect_by_name(testbench, rtl_sim) # testbench.sv
g.connect_by_name(dc, pt_power_rtl) # design.namemap
g.connect_by_name(
signoff,
pt_power_rtl) # design.vcs.v, design.spef.gz, design.pt.sdc
g.connect_by_name(rtl_sim, pt_power_rtl) # run.saif
g.connect_by_name(rtl, synth)
g.connect_by_name(constraints, synth)
g.connect_by_name(custom_genus_scripts, synth)
g.connect_by_name(constraints, iflow)
g.connect_by_name(custom_dc_scripts, iflow)
for c_step in custom_timing_steps:
g.connect_by_name(custom_timing_assert, c_step)
g.connect_by_name(synth, iflow)
g.connect_by_name(synth, init)
g.connect_by_name(synth, power)
g.connect_by_name(synth, place)
g.connect_by_name(synth, cts)
g.connect_by_name(synth, custom_flowgen_setup)
g.connect_by_name(custom_flowgen_setup, iflow)
g.connect_by_name(iflow, init)
g.connect_by_name(iflow, power)
g.connect_by_name(iflow, place)
g.connect_by_name(iflow, cts)
g.connect_by_name(iflow, postcts_hold)
g.connect_by_name(iflow, route)
g.connect_by_name(iflow, postroute)
g.connect_by_name(iflow, signoff)
g.connect_by_name(custom_init, init)
g.connect_by_name(custom_power, power)
g.connect_by_name(init, power)
g.connect_by_name(power, place)
g.connect_by_name(place, cts)
g.connect_by_name(cts, postcts_hold)
g.connect_by_name(postcts_hold, route)
g.connect_by_name(route, postroute)
g.connect_by_name(postroute, signoff)
g.connect_by_name(signoff, drc)
g.connect_by_name(signoff, lvs)
g.connect(signoff.o('design-merged.gds'), drc.i('design_merged.gds'))
g.connect(signoff.o('design-merged.gds'), lvs.i('design_merged.gds'))
g.connect_by_name(signoff, genlibdb)
g.connect_by_name(adk, genlibdb)
g.connect_by_name(genlibdb_constraints, genlibdb)
g.connect_by_name(adk, pt_signoff)
g.connect_by_name(signoff, pt_signoff)
g.connect_by_name(signoff, pt_power_gl)
g.connect_by_name(gl_sim, pt_power_gl) # run.saif
g.connect_by_name(adk, gl_sim)
g.connect_by_name(signoff,
gl_sim) # design.vcs.v, design.spef.gz, design.pt.sdc
g.connect_by_name(pt_signoff, gl_sim) # design.sdf
g.connect_by_name(testbench, gl_sim) # testbench.sv
g.connect_by_name(pt_power_gl, parse_power_gl) # power.hier
if synth_power:
g.connect_by_name(adk, pt_power_synth)
g.connect_by_name(synth, pt_power_synth)
g.connect_by_name(synth_sim, pt_power_synth)
g.connect_by_name(adk, synth_sim)
g.connect_by_name(synth, synth_sim)
g.connect_by_name(testbench, synth_sim)
g.connect_by_name(adk, debugcalibre)
g.connect_by_name(synth, debugcalibre)
g.connect_by_name(iflow, debugcalibre)
g.connect_by_name(signoff, debugcalibre)
g.connect_by_name(drc, debugcalibre)
g.connect_by_name(lvs, debugcalibre)
# Pwr aware steps:
if pwr_aware:
g.connect_by_name(power_domains, synth)
g.connect_by_name(power_domains, init)
g.connect_by_name(power_domains, power)
g.connect_by_name(power_domains, place)
g.connect_by_name(power_domains, cts)
g.connect_by_name(power_domains, postcts_hold)
g.connect_by_name(power_domains, route)
g.connect_by_name(power_domains, postroute)
g.connect_by_name(power_domains, signoff)
g.connect_by_name(adk, pwr_aware_gls)
g.connect_by_name(signoff, pwr_aware_gls)
#g.connect(power_domains.o('pd-globalnetconnect.tcl'), power.i('globalnetconnect.tcl'))
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params(parameters)
# Add custom timing scripts
for c_step in custom_timing_steps:
order = c_step.get_param('order')
order.append('report-special-timing.tcl')
c_step.set_param('order', order)
c_step.extend_postconditions([{'pytest': 'inputs/test_timing.py'}])
# Update PWR_AWARE variable
synth.update_params({'PWR_AWARE': parameters['PWR_AWARE']}, True)
init.update_params({'PWR_AWARE': parameters['PWR_AWARE']}, True)
power.update_params({'PWR_AWARE': parameters['PWR_AWARE']}, True)
if pwr_aware:
init.update_params({'flatten_effort': parameters['flatten_effort']},
True)
pwr_aware_gls.update_params({'design_name': parameters['design_name']},
True)
init.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
place.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
cts.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
postcts_hold.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
route.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
postroute.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
signoff.extend_postconditions([
"assert 'Clamping logic structure in the SBs and CBs is maintained' in File( 'mflowgen-run.log' )"
])
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
init.update_params(
{'core_density_target': parameters['core_density_target']}, True)
# init -- Add 'edge-blockages.tcl' after 'pin-assignments.tcl'
# and 'additional-path-groups' after 'make_path_groups'
order = init.get_param('order') # get the default script run order
path_group_idx = order.index('make-path-groups.tcl')
order.insert(path_group_idx + 1, 'additional-path-groups.tcl')
pin_idx = order.index('pin-assignments.tcl') # find pin-assignments.tcl
order.insert(pin_idx + 1, 'edge-blockages.tcl') # add here
init.update_params({'order': order})
# Adding new input for genlibdb node to run
order = genlibdb.get_param('order') # get the default script run order
read_idx = order.index('read_design.tcl') # find read_design.tcl
order.insert(read_idx + 1, 'genlibdb-constraints.tcl') # add here
genlibdb.update_params({'order': order})
# Pwr aware steps:
if pwr_aware:
# init node
order = init.get_param('order')
read_idx = order.index('floorplan.tcl') # find floorplan.tcl
order.insert(read_idx + 1, 'pe-load-upf.tcl') # add here
order.insert(read_idx + 2, 'pd-pe-floorplan.tcl') # add here
order.insert(read_idx + 3,
'pe-add-endcaps-welltaps-setup.tcl') # add here
order.insert(read_idx + 4, 'pd-add-endcaps-welltaps.tcl') # add here
order.insert(read_idx + 5, 'pe-power-switches-setup.tcl') # add here
order.insert(read_idx + 6, 'add-power-switches.tcl') # add here
order.remove('add-endcaps-welltaps.tcl')
order.append('check-clamp-logic-structure.tcl')
init.update_params({'order': order})
# power node
order = power.get_param('order')
order.insert(0, 'pd-globalnetconnect.tcl') # add here
order.remove('globalnetconnect.tcl')
power.update_params({'order': order})
# place node
order = place.get_param('order')
read_idx = order.index('main.tcl') # find main.tcl
order.insert(read_idx - 1, 'place-dont-use-constraints.tcl')
order.append('check-clamp-logic-structure.tcl')
place.update_params({'order': order})
# cts node
order = cts.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
cts.update_params({'order': order})
# postcts_hold node
order = postcts_hold.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
postcts_hold.update_params({'order': order})
# route node
order = route.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
route.update_params({'order': order})
# postroute node
order = postroute.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
order.append('check-clamp-logic-structure.tcl')
postroute.update_params({'order': order})
# signoff node
order = signoff.get_param('order')
order.insert(0, 'conn-aon-cells-vdd.tcl') # add here
read_idx = order.index(
'generate-results.tcl') # find generate_results.tcl
order.insert(read_idx + 1, 'pd-generate-lvs-netlist.tcl')
order.append('check-clamp-logic-structure.tcl')
signoff.update_params({'order': order})
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'view-standard'
parameters = {
'construct_path': __file__,
'design_name': 'global_buffer',
'clock_period': 1.25,
'adk': adk_name,
'adk_view': adk_view,
# Synthesis
'flatten_effort': 3,
'topographical': True,
# hold target slack
'hold_target_slack': 0.045,
# array_width = width of CGRA below GLB; `pin-assignments.tcl` uses
# these parms to set up per-cgra-column ports connecting glb tile
# signals in glb_top to corresponding CGRA tile columns below glb_top
'array_width': 32,
'num_glb_tiles': 16,
'tool': "VCS",
# glb tile memory size (unit: KB)
'glb_tile_mem_size': 256,
'rtl_testvectors': ["test1", "test2", "test3", "test4"],
'gls_testvectors': ["test1.pwr", "test2.pwr"]
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/../common/rtl')
sim_compile = Step(this_dir + '/sim-compile')
sim_run = Step(this_dir + '/sim-run')
sim_gl_compile = Step(this_dir + '/sim-gl-compile')
glb_tile = Step(this_dir + '/glb_tile')
constraints = Step(this_dir + '/constraints')
custom_init = Step(this_dir + '/custom-init')
custom_lvs = Step(this_dir + '/custom-lvs-rules')
custom_power = Step(this_dir + '/../common/custom-power-hierarchical')
lib2db = Step(this_dir + '/../common/synopsys-dc-lib2db')
# Default steps
info = Step('info', default=True)
synth = Step('cadence-genus-synthesis', default=True)
iflow = Step('cadence-innovus-flowsetup', default=True)
init = Step('cadence-innovus-init', default=True)
power = Step('cadence-innovus-power', default=True)
place = Step('cadence-innovus-place', default=True)
cts = Step('cadence-innovus-cts', default=True)
postcts_hold = Step('cadence-innovus-postcts_hold', default=True)
route = Step('cadence-innovus-route', default=True)
postroute = Step('cadence-innovus-postroute', default=True)
postroute_hold = Step('cadence-innovus-postroute_hold', default=True)
signoff = Step('cadence-innovus-signoff', default=True)
pt_signoff = Step('synopsys-pt-timing-signoff', default=True)
genlib = Step('cadence-genus-genlib', default=True)
if which("calibre") is not None:
drc = Step('mentor-calibre-drc', default=True)
lvs = Step('mentor-calibre-lvs', default=True)
else:
drc = Step('cadence-pegasus-drc', default=True)
lvs = Step('cadence-pegasus-lvs', default=True)
debugcalibre = Step('cadence-innovus-debug-calibre', default=True)
if parameters['tool'] == 'VCS':
sim_compile.extend_outputs(['simv', 'simv.daidir'])
sim_gl_compile.extend_outputs(['simv', 'simv.daidir'])
sim_run.extend_inputs(['simv', 'simv.daidir'])
elif parameters['tool'] == 'XCELIUM':
sim_compile.extend_outputs(['xcelium.d'])
sim_gl_compile.extend_outputs(['xcelium.d'])
sim_run.extend_inputs(['xcelium.d'])
sim_gl_run_nodes = {}
ptpx_gl_nodes = {}
for test in parameters["gls_testvectors"]:
sim_gl_run = Step(this_dir + '/sim-gl-run')
ptpx_gl = Step(this_dir + '/synopsys-ptpx-gl')
# rename
sim_gl_run.set_name(f"sim_gl_run_{test}")
ptpx_gl.set_name(f"ptpx_gl_{test}")
sim_gl_run_nodes[test] = sim_gl_run
ptpx_gl_nodes[test] = ptpx_gl
sim_gl_run.update_params({'test': test}, allow_new=True)
# Gate-level ptpx node
ptpx_gl.set_param("strip_path", "top/dut")
ptpx_gl.extend_inputs(glb_tile.all_outputs())
if parameters['tool'] == 'VCS':
sim_gl_run.extend_inputs(['simv', 'simv.daidir'])
elif parameters['tool'] == 'XCELIUM':
sim_gl_run.extend_inputs(['xcelium.d'])
# Add header files to outputs
rtl.extend_outputs(['header'])
rtl.extend_postconditions(["assert File( 'outputs/header' ) "])
# Add (dummy) parameters to the default innovus init step
init.update_params({'core_width': 0, 'core_height': 0}, allow_new=True)
# Add glb_tile macro inputs to downstream nodes
pt_signoff.extend_inputs(['glb_tile_tt.db'])
# These steps need timing info for glb_tiles
tile_steps = \
[ synth, iflow, init, power, place, cts, postcts_hold,
route, postroute, postroute_hold, signoff, genlib ]
for step in tile_steps:
step.extend_inputs(['glb_tile_tt.lib', 'glb_tile.lef'])
# Need the glb_tile gds to merge into the final layout
signoff.extend_inputs(['glb_tile.gds'])
# Need glb_tile lvs.v file for LVS
lvs.extend_inputs(['glb_tile.lvs.v'])
# Need sram spice file for LVS
lvs.extend_inputs(['sram.spi'])
xlist = synth.get_postconditions()
xlist = \
[ _ for _ in xlist if 'percent_clock_gated' not in _ ]
xlist = synth.set_postconditions(xlist)
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs(custom_init.all_outputs())
power.extend_inputs(custom_power.all_outputs())
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(sim_compile)
g.add_step(sim_run)
g.add_step(sim_gl_compile)
g.add_step(glb_tile)
g.add_step(constraints)
g.add_step(synth)
g.add_step(iflow)
g.add_step(init)
g.add_step(custom_init)
g.add_step(power)
g.add_step(custom_power)
g.add_step(place)
g.add_step(cts)
g.add_step(postcts_hold)
g.add_step(route)
g.add_step(postroute)
g.add_step(postroute_hold)
g.add_step(signoff)
g.add_step(pt_signoff)
g.add_step(genlib)
g.add_step(lib2db)
g.add_step(drc)
g.add_step(lvs)
g.add_step(custom_lvs)
g.add_step(debugcalibre)
for test in parameters["gls_testvectors"]:
g.add_step(sim_gl_run_nodes[test])
g.add_step(ptpx_gl_nodes[test])
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name(adk, synth)
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, power)
g.connect_by_name(adk, place)
g.connect_by_name(adk, cts)
g.connect_by_name(adk, postcts_hold)
g.connect_by_name(adk, route)
g.connect_by_name(adk, postroute)
g.connect_by_name(adk, postroute_hold)
g.connect_by_name(adk, signoff)
g.connect_by_name(adk, drc)
g.connect_by_name(adk, lvs)
g.connect_by_name(glb_tile, synth)
g.connect_by_name(glb_tile, iflow)
g.connect_by_name(glb_tile, init)
g.connect_by_name(glb_tile, power)
g.connect_by_name(glb_tile, place)
g.connect_by_name(glb_tile, cts)
g.connect_by_name(glb_tile, postcts_hold)
g.connect_by_name(glb_tile, route)
g.connect_by_name(glb_tile, postroute)
g.connect_by_name(glb_tile, postroute_hold)
g.connect_by_name(glb_tile, signoff)
g.connect_by_name(glb_tile, pt_signoff)
g.connect_by_name(glb_tile, genlib)
g.connect_by_name(glb_tile, drc)
g.connect_by_name(glb_tile, lvs)
g.connect_by_name(rtl, sim_compile)
g.connect_by_name(sim_compile, sim_run)
g.connect_by_name(rtl, synth)
g.connect_by_name(constraints, synth)
# glb_tile can use the same rtl as glb_top
g.connect_by_name(rtl, glb_tile)
g.connect_by_name(synth, iflow)
g.connect_by_name(synth, init)
g.connect_by_name(synth, power)
g.connect_by_name(synth, place)
g.connect_by_name(synth, cts)
g.connect_by_name(iflow, init)
g.connect_by_name(iflow, power)
g.connect_by_name(iflow, place)
g.connect_by_name(iflow, cts)
g.connect_by_name(iflow, postcts_hold)
g.connect_by_name(iflow, route)
g.connect_by_name(iflow, postroute)
g.connect_by_name(iflow, postroute_hold)
g.connect_by_name(iflow, signoff)
g.connect_by_name(custom_init, init)
g.connect_by_name(custom_power, power)
g.connect_by_name(custom_lvs, lvs)
g.connect_by_name(init, power)
g.connect_by_name(power, place)
g.connect_by_name(place, cts)
g.connect_by_name(cts, postcts_hold)
g.connect_by_name(postcts_hold, route)
g.connect_by_name(route, postroute)
g.connect_by_name(postroute, postroute_hold)
g.connect_by_name(postroute_hold, signoff)
g.connect_by_name(signoff, drc)
g.connect_by_name(signoff, lvs)
g.connect(signoff.o('design-merged.gds'), drc.i('design_merged.gds'))
g.connect(signoff.o('design-merged.gds'), lvs.i('design_merged.gds'))
g.connect_by_name(adk, pt_signoff)
g.connect_by_name(signoff, pt_signoff)
g.connect_by_name(adk, genlib)
g.connect_by_name(signoff, genlib)
g.connect_by_name(rtl, sim_gl_compile)
g.connect_by_name(adk, sim_gl_compile)
g.connect_by_name(glb_tile, sim_gl_compile)
g.connect_by_name(signoff, sim_gl_compile)
for test in parameters["gls_testvectors"]:
g.connect_by_name(sim_gl_compile, sim_gl_run_nodes[test])
for test in parameters["gls_testvectors"]:
g.connect_by_name(adk, ptpx_gl_nodes[test])
g.connect_by_name(glb_tile, ptpx_gl_nodes[test])
g.connect_by_name(signoff, ptpx_gl_nodes[test])
g.connect_by_name(sim_gl_run_nodes[test], ptpx_gl_nodes[test])
g.connect_by_name(genlib, lib2db)
g.connect_by_name(adk, debugcalibre)
g.connect_by_name(synth, debugcalibre)
g.connect_by_name(iflow, debugcalibre)
g.connect_by_name(signoff, debugcalibre)
g.connect_by_name(drc, debugcalibre)
g.connect_by_name(lvs, debugcalibre)
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params(parameters)
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
# rtl parameters update
rtl.update_params({'glb_only': True}, allow_new=True)
# pin assignment parameters update
init.update_params({'array_width': parameters['array_width']},
allow_new=True)
init.update_params({'num_glb_tiles': parameters['num_glb_tiles']},
allow_new=True)
# Change nthreads
synth.update_params({'nthreads': 4})
iflow.update_params({'nthreads': 4})
order = init.get_param('order') # get the default script run order
reporting_idx = order.index('reporting.tcl') # find reporting.tcl
# Add dont-touch before reporting
order.insert(reporting_idx, 'dont-touch.tcl')
init.update_params({'order': order})
# Increase hold slack on postroute_hold step
postroute_hold.update_params(
{'hold_target_slack': parameters['hold_target_slack']}, allow_new=True)
# useful_skew
cts.update_params({'useful_skew': False}, allow_new=True)
return g
def construct():
g = Graph()
#-----------------------------------------------------------------------
# Parameters
#-----------------------------------------------------------------------
adk_name = 'tsmc16'
adk_view = 'stdview'
parameters = {
'construct_path': __file__,
'design_name': 'GarnetSOC_pad_frame',
'clock_period': 100.0,
'adk': adk_name,
'adk_view': adk_view,
# Synthesis
'flatten_effort': 3,
'topographical': True,
# RTL Generation
'array_width': 32,
'array_height': 16,
'interconnect_only': False,
# Include Garnet?
'soc_only': False,
# SRAM macros
'num_words': 2048,
'word_size': 64,
'mux_size': 8,
'corner': "tt0p8v25c",
'partial_write': True,
# Low Effort flow
'express_flow': False,
'skip_verify_connectivity': True,
'lvs_hcells_file': 'inputs/adk/hcells.inc',
'lvs_connect_names': '"VDD VSS VDDPST"',
# DRC rule deck
'drc_rule_deck': 'calibre-drc-chip.rule',
'antenna_drc_rule_deck': 'calibre-drc-antenna.rule'
}
#-----------------------------------------------------------------------
# Create nodes
#-----------------------------------------------------------------------
this_dir = os.path.dirname(os.path.abspath(__file__))
# ADK step
g.set_adk(adk_name)
adk = g.get_adk_step()
# Custom steps
rtl = Step(this_dir + '/../common/rtl')
soc_rtl = Step(this_dir + '/../common/soc-rtl')
gen_sram = Step(this_dir + '/../common/gen_sram_macro')
constraints = Step(this_dir + '/constraints')
custom_init = Step(this_dir + '/custom-init')
custom_lvs = Step(this_dir + '/custom-lvs-rules')
custom_power = Step(this_dir + '/../common/custom-power-chip')
dc = Step(this_dir + '/custom-dc-synthesis')
init_fc = Step(this_dir + '/../common/init-fullchip')
io_file = Step(this_dir + '/io_file')
pre_route = Step(this_dir + '/pre-route')
sealring = Step(this_dir + '/sealring')
netlist_fixing = Step(this_dir + '/../common/fc-netlist-fixing')
# Block-level designs
tile_array = Step(this_dir + '/tile_array')
glb_top = Step(this_dir + '/glb_top')
global_controller = Step(this_dir + '/global_controller')
# Default steps
info = Step('info', default=True)
#constraints = Step( 'constraints', default=True )
#dc = Step( 'synopsys-dc-synthesis', default=True )
iflow = Step('cadence-innovus-flowsetup', default=True)
init = Step('cadence-innovus-init', default=True)
power = Step('cadence-innovus-power', default=True)
place = Step('cadence-innovus-place', default=True)
cts = Step('cadence-innovus-cts', default=True)
postcts_hold = Step('cadence-innovus-postcts_hold', default=True)
route = Step('cadence-innovus-route', default=True)
postroute = Step('cadence-innovus-postroute', default=True)
postroute_hold = Step('cadence-innovus-postroute_hold', default=True)
signoff = Step('cadence-innovus-signoff', default=True)
pt_signoff = Step('synopsys-pt-timing-signoff', default=True)
gdsmerge = Step('mentor-calibre-gdsmerge', default=True)
drc = Step('mentor-calibre-drc', default=True)
lvs = Step('mentor-calibre-lvs', default=True)
debugcalibre = Step('cadence-innovus-debug-calibre', default=True)
fill = Step('mentor-calibre-fill', default=True)
# Send in the clones
# 'power' step now gets its own design-rule check
power_drc = drc.clone()
power_drc.set_name('power-drc')
# "power" now builds a gds file for its own drc check "power_drc";
# so need a gdsmerge step between the two
power_gdsmerge = gdsmerge.clone()
power_gdsmerge.set_name('power-gdsmerge')
# Antenna DRC Check
antenna_drc = drc.clone()
antenna_drc.set_name('antenna-drc')
# Add cgra tile macro inputs to downstream nodes
dc.extend_inputs(['tile_array.db'])
dc.extend_inputs(['glb_top.db'])
dc.extend_inputs(['global_controller.db'])
dc.extend_inputs(['sram_tt.db'])
pt_signoff.extend_inputs(['tile_array.db'])
pt_signoff.extend_inputs(['glb_top.db'])
pt_signoff.extend_inputs(['global_controller.db'])
pt_signoff.extend_inputs(['sram_tt.db'])
route.extend_inputs(['pre-route.tcl'])
signoff.extend_inputs(sealring.all_outputs())
signoff.extend_inputs(netlist_fixing.all_outputs())
# These steps need timing info for cgra tiles
hier_steps = \
[ iflow, init, power, place, cts, postcts_hold,
route, postroute, signoff]
for step in hier_steps:
step.extend_inputs(['tile_array_tt.lib', 'tile_array.lef'])
step.extend_inputs(['glb_top_tt.lib', 'glb_top.lef'])
step.extend_inputs(
['global_controller_tt.lib', 'global_controller.lef'])
step.extend_inputs(['sram_tt.lib', 'sram.lef'])
# Need the cgra tile gds's to merge into the final layout
gdsmerge_nodes = [gdsmerge, power_gdsmerge]
for node in gdsmerge_nodes:
node.extend_inputs(['tile_array.gds'])
node.extend_inputs(['glb_top.gds'])
node.extend_inputs(['global_controller.gds'])
node.extend_inputs(['sram.gds'])
# Need extracted spice files for both tile types to do LVS
lvs.extend_inputs(['tile_array.lvs.v'])
lvs.extend_inputs(['tile_array.sram.spi'])
lvs.extend_inputs(['glb_top.lvs.v'])
lvs.extend_inputs(['glb_top.sram.spi'])
lvs.extend_inputs(['global_controller.lvs.v'])
lvs.extend_inputs(['sram.spi'])
# Add extra input edges to innovus steps that need custom tweaks
init.extend_inputs(custom_init.all_outputs())
init.extend_inputs(init_fc.all_outputs())
power.extend_inputs(custom_power.all_outputs())
dc.extend_inputs(soc_rtl.all_outputs())
power.extend_outputs(["design.gds.gz"])
#-----------------------------------------------------------------------
# Graph -- Add nodes
#-----------------------------------------------------------------------
g.add_step(info)
g.add_step(rtl)
g.add_step(soc_rtl)
g.add_step(gen_sram)
g.add_step(tile_array)
g.add_step(glb_top)
g.add_step(global_controller)
g.add_step(constraints)
g.add_step(dc)
g.add_step(iflow)
g.add_step(init)
g.add_step(init_fc)
g.add_step(io_file)
g.add_step(custom_init)
g.add_step(power)
g.add_step(custom_power)
g.add_step(place)
g.add_step(cts)
g.add_step(postcts_hold)
g.add_step(pre_route)
g.add_step(route)
g.add_step(postroute)
g.add_step(postroute_hold)
g.add_step(sealring)
g.add_step(netlist_fixing)
g.add_step(signoff)
g.add_step(pt_signoff)
g.add_step(gdsmerge)
g.add_step(fill)
g.add_step(drc)
g.add_step(antenna_drc)
g.add_step(lvs)
g.add_step(custom_lvs)
g.add_step(debugcalibre)
# Post-Power DRC check
g.add_step(power_drc)
g.add_step(power_gdsmerge)
#-----------------------------------------------------------------------
# Graph -- Add edges
#-----------------------------------------------------------------------
# Connect by name
g.connect_by_name(adk, dc)
g.connect_by_name(adk, iflow)
g.connect_by_name(adk, init)
g.connect_by_name(adk, power)
g.connect_by_name(adk, place)
g.connect_by_name(adk, cts)
g.connect_by_name(adk, postcts_hold)
g.connect_by_name(adk, route)
g.connect_by_name(adk, postroute)
g.connect_by_name(adk, postroute_hold)
g.connect_by_name(adk, signoff)
g.connect_by_name(adk, gdsmerge)
g.connect_by_name(adk, fill)
g.connect_by_name(adk, drc)
g.connect_by_name(adk, antenna_drc)
g.connect_by_name(adk, lvs)
# Post-Power DRC check
g.connect_by_name(adk, power_gdsmerge)
g.connect_by_name(adk, power_drc)
# All of the blocks within this hierarchical design
# Skip these if we're doing soc_only
if parameters['soc_only'] == False:
blocks = [tile_array, glb_top, global_controller]
for block in blocks:
g.connect_by_name(block, dc)
g.connect_by_name(block, iflow)
g.connect_by_name(block, init)
g.connect_by_name(block, power)
g.connect_by_name(block, place)
g.connect_by_name(block, cts)
g.connect_by_name(block, postcts_hold)
g.connect_by_name(block, route)
g.connect_by_name(block, postroute)
g.connect_by_name(block, postroute_hold)
g.connect_by_name(block, signoff)
g.connect_by_name(block, pt_signoff)
g.connect_by_name(block, gdsmerge)
g.connect_by_name(block, power_gdsmerge)
g.connect_by_name(block, drc)
g.connect_by_name(block, lvs)
g.connect_by_name(rtl, dc)
g.connect_by_name(soc_rtl, dc)
g.connect_by_name(constraints, dc)
g.connect_by_name(dc, iflow)
g.connect_by_name(dc, init)
g.connect_by_name(dc, power)
g.connect_by_name(dc, place)
g.connect_by_name(dc, cts)
g.connect_by_name(iflow, init)
g.connect_by_name(iflow, power)
g.connect_by_name(iflow, place)
g.connect_by_name(iflow, cts)
g.connect_by_name(iflow, postcts_hold)
g.connect_by_name(iflow, route)
g.connect_by_name(iflow, postroute)
g.connect_by_name(iflow, postroute_hold)
g.connect_by_name(iflow, signoff)
g.connect_by_name(custom_init, init)
g.connect_by_name(custom_lvs, lvs)
g.connect_by_name(custom_power, power)
# SRAM macro
g.connect_by_name(gen_sram, dc)
g.connect_by_name(gen_sram, iflow)
g.connect_by_name(gen_sram, init)
g.connect_by_name(gen_sram, power)
g.connect_by_name(gen_sram, place)
g.connect_by_name(gen_sram, cts)
g.connect_by_name(gen_sram, postcts_hold)
g.connect_by_name(gen_sram, route)
g.connect_by_name(gen_sram, postroute)
g.connect_by_name(gen_sram, postroute_hold)
g.connect_by_name(gen_sram, signoff)
g.connect_by_name(gen_sram, pt_signoff)
g.connect_by_name(gen_sram, gdsmerge)
g.connect_by_name(gen_sram, power_gdsmerge)
g.connect_by_name(gen_sram, drc)
g.connect_by_name(gen_sram, lvs)
# Full chip floorplan stuff
g.connect_by_name(io_file, init_fc)
g.connect_by_name(init_fc, init)
g.connect_by_name(init, power)
g.connect_by_name(power, place)
g.connect_by_name(place, cts)
g.connect_by_name(cts, postcts_hold)
g.connect_by_name(postcts_hold, route)
g.connect_by_name(route, postroute)
g.connect_by_name(postroute, postroute_hold)
g.connect_by_name(postroute_hold, signoff)
g.connect_by_name(signoff, gdsmerge)
g.connect_by_name(signoff, lvs)
# Doing DRC on post-fill GDS instead
#g.connect_by_name( gdsmerge, drc )
g.connect_by_name(gdsmerge, lvs)
# Run Fill on merged GDS
g.connect(gdsmerge.o('design_merged.gds'), fill.i('design.gds'))
# Run DRC on merged and filled gds
g.connect(fill.o('design.gds'), drc.i('design_merged.gds'))
g.connect(fill.o('design.gds'), antenna_drc.i('design_merged.gds'))
g.connect_by_name(adk, pt_signoff)
g.connect_by_name(signoff, pt_signoff)
g.connect_by_name(adk, debugcalibre)
g.connect_by_name(dc, debugcalibre)
g.connect_by_name(iflow, debugcalibre)
g.connect_by_name(signoff, debugcalibre)
g.connect_by_name(drc, debugcalibre)
g.connect_by_name(lvs, debugcalibre)
g.connect_by_name(pre_route, route)
g.connect_by_name(sealring, signoff)
g.connect_by_name(netlist_fixing, signoff)
# Post-Power DRC
g.connect_by_name(power, power_gdsmerge)
g.connect_by_name(power_gdsmerge, power_drc)
#-----------------------------------------------------------------------
# Parameterize
#-----------------------------------------------------------------------
g.update_params(parameters)
# Since we are adding an additional input script to the generic Innovus
# steps, we modify the order parameter for that node which determines
# which scripts get run and when they get run.
# DC needs these param to set the NO_CGRA macro
dc.update_params({'soc_only': parameters['soc_only']}, True)
init.update_params({'soc_only': parameters['soc_only']}, True)
init.update_params({
'order': [
'main.tcl', 'quality-of-life.tcl',
'stylus-compatibility-procs.tcl', 'floorplan.tcl',
'io-fillers.tcl', 'alignment-cells.tcl', 'gen-bumps.tcl',
'check-bumps.tcl', 'route-bumps.tcl', 'place-macros.tcl',
'dont-touch.tcl'
]
})
# Power node order manipulation
order = power.get_param('order')
# Move endcap/welltap insertion to end of power step to improve runtime
order.append('add-endcaps-welltaps.tcl')
# Stream out post-power GDS so that we can run DRC here
order.append('innovus-foundation-flow/custom-scripts/stream-out.tcl')
order.append('attach-results-to-outputs.tcl')
power.update_params({'order': order})
# Add pre-route plugin to insert skip_routing commands
order = route.get_param('order')
order.insert(0, 'pre-route.tcl')
route.update_params({'order': order})
# Add sealring at beginning of signoff, so it's in before we stream out GDS
order = signoff.get_param('order')
order.insert(0, 'add-sealring.tcl')
# Add netlist-fixing script before we save new netlist
index = order.index('generate-results.tcl')
order.insert(index, 'netlist-fixing.tcl')
signoff.update_params({'order': order})
# Fill adds _filled to end of design_name
drc.update_params({'design_name': parameters['design_name'] + "_filled"})
antenna_drc.update_params(
{'design_name': parameters['design_name'] + "_filled"})
# Antenna DRC node needs to use antenna rule deck
antenna_drc.update_params(
{'drc_rule_deck': parameters['antenna_drc_rule_deck']})
return g
