def __init__(self, with_sawg, **kwargs):
BaseSoC.__init__(self,
cpu_type="or1k",
sdram_controller_type="minicon",
l2_size=128*1024,
**kwargs)
RTMCommon.__init__(self)
add_identifier(self, suffix=".without-sawg" if not with_sawg else "")
self.config["HMC830_REF"] = "150"
platform = self.platform
rtio_clk_freq = 150e6
rtio_channels = []
for i in range(4):
phy = ttl_simple.Output(platform.request("user_led", i))
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
sma_io = platform.request("sma_io", 0)
self.comb += sma_io.direction.eq(1)
phy = ttl_simple.Output(sma_io.level)
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
sma_io = platform.request("sma_io", 1)
self.comb += sma_io.direction.eq(0)
phy = ttl_simple.InOut(sma_io.level)
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
self.submodules.ad9154_crg = jesd204_tools.UltrascaleCRG(
platform, use_rtio_clock=True)
if with_sawg:
cls = AD9154
else:
cls = AD9154NoSAWG
self.submodules.ad9154_0 = cls(platform, self.crg, self.ad9154_crg, 0)
self.submodules.ad9154_1 = cls(platform, self.crg, self.ad9154_crg, 1)
self.csr_devices.append("ad9154_crg")
self.csr_devices.append("ad9154_0")
self.csr_devices.append("ad9154_1")
self.config["HAS_AD9154"] = None
self.add_csr_group("ad9154", ["ad9154_0", "ad9154_1"])
self.config["RTIO_FIRST_SAWG_CHANNEL"] = len(rtio_channels)
rtio_channels.extend(rtio.Channel.from_phy(phy)
for sawg in self.ad9154_0.sawgs +
self.ad9154_1.sawgs
for phy in sawg.phys)
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
self.comb += platform.request("sfp_tx_disable", 0).eq(0)
self.submodules.drtio_transceiver = gth_ultrascale.GTH(
clock_pads=platform.request("si5324_clkout"),
data_pads=[platform.request("sfp", 0)],
sys_clk_freq=self.clk_freq,
rtio_clk_freq=rtio_clk_freq)
self.csr_devices.append("drtio_transceiver")
self.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
rx0 = ClockDomainsRenamer({"rtio_rx": "rtio_rx0"})
self.submodules.rx_synchronizer = rx0(XilinxRXSynchronizer())
self.submodules.drtiosat = rx0(DRTIOSatellite(
self.rtio_tsc, self.drtio_transceiver.channels[0],
self.rx_synchronizer))
self.csr_devices.append("drtiosat")
self.submodules.drtioaux0 = rx0(DRTIOAuxController(
self.drtiosat.link_layer))
self.csr_devices.append("drtioaux0")
self.add_wb_slave(self.mem_map["drtioaux"], 0x800,
self.drtioaux0.bus)
self.add_memory_region("drtioaux0_mem", self.mem_map["drtioaux"] | self.shadow_base, 0x800)
self.config["HAS_DRTIO"] = None
self.add_csr_group("drtioaux", ["drtioaux0"])
self.add_memory_group("drtioaux_mem", ["drtioaux0_mem"])
self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
self.comb += [
self.drtiosat.cri.connect(self.local_io.cri),
self.drtiosat.async_errors.eq(self.local_io.async_errors),
]
self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
self.submodules.siphaser = SiPhaser7Series(
si5324_clkin=platform.request("si5324_clkin"),
si5324_clkout_fabric=platform.request("si5324_clkout_fabric"))
platform.add_platform_command("set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets {mmcm_ps}]",
mmcm_ps=self.siphaser.mmcm_ps_output)
platform.add_false_path_constraints(
self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
self.csr_devices.append("siphaser")
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
self.csr_devices.append("si5324_rst_n")
i2c = self.platform.request("i2c")
self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
self.csr_devices.append("i2c")
self.config["I2C_BUS_COUNT"] = 1
self.config["HAS_SI5324"] = None
self.submodules.sysref_sampler = jesd204_tools.SysrefSampler(
self.rtio_tsc.coarse_ts, self.ad9154_crg.jref)
self.csr_devices.append("sysref_sampler")
rtio_clk_period = 1e9/rtio_clk_freq
gth = self.drtio_transceiver.gths[0]
platform.add_period_constraint(gth.txoutclk, rtio_clk_period)
platform.add_period_constraint(gth.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.crg.cd_sys.clk,
gth.txoutclk, gth.rxoutclk)
def __init__(self, with_sawg, **kwargs):
BaseSoC.__init__(self,
cpu_type="or1k",
sdram_controller_type="minicon",
l2_size=128 * 1024,
ident=artiq_version,
**kwargs)
if with_sawg:
warnings.warn("SAWG is not implemented yet with DRTIO, ignoring.")
platform = self.platform
rtio_clk_freq = 150e6
self.submodules += Microscope(platform.request("serial", 1),
self.clk_freq)
self.submodules.rtio_clkmul = _RTIOClockMultiplier(
platform, rtio_clk_freq)
rtio_channels = []
for i in range(4):
phy = ttl_simple.Output(platform.request("user_led", i))
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
sma_io = platform.request("sma_io", 0)
self.comb += sma_io.direction.eq(1)
phy = ttl_simple.Output(sma_io.level)
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
sma_io = platform.request("sma_io", 1)
self.comb += sma_io.direction.eq(0)
phy = ttl_simple.InOut(sma_io.level)
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
self.comb += platform.request("sfp_tx_disable", 0).eq(0)
self.submodules.drtio_transceiver = gth_ultrascale.GTH(
clock_pads=platform.request("si5324_clkout"),
data_pads=[platform.request("sfp", 0)],
sys_clk_freq=self.clk_freq,
rtio_clk_freq=rtio_clk_freq)
self.csr_devices.append("drtio_transceiver")
rx0 = ClockDomainsRenamer({"rtio_rx": "rtio_rx0"})
self.submodules.rx_synchronizer = rx0(XilinxRXSynchronizer())
self.submodules.drtio0 = rx0(
DRTIOSatellite(self.drtio_transceiver.channels[0], rtio_channels,
self.rx_synchronizer))
self.csr_devices.append("drtio0")
self.add_wb_slave(self.mem_map["drtio_aux"], 0x800,
self.drtio0.aux_controller.bus)
self.add_memory_region("drtio0_aux",
self.mem_map["drtio_aux"] | self.shadow_base,
0x800)
self.config["HAS_DRTIO"] = None
self.add_csr_group("drtio", ["drtio0"])
self.add_memory_group("drtio_aux", ["drtio0_aux"])
self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq / 1e6)
self.submodules.siphaser = SiPhaser7Series(
si5324_clkin=platform.request("si5324_clkin"),
si5324_clkout_fabric=platform.request("si5324_clkout_fabric"))
platform.add_platform_command(
"set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets {mmcm_ps}]",
mmcm_ps=self.siphaser.mmcm_ps_output)
platform.add_false_path_constraints(self.crg.cd_sys.clk,
self.siphaser.mmcm_freerun_output)
self.csr_devices.append("siphaser")
self.submodules.si5324_rst_n = gpio.GPIOOut(
platform.request("si5324").rst_n)
self.csr_devices.append("si5324_rst_n")
i2c = self.platform.request("i2c")
self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
self.csr_devices.append("i2c")
self.config["I2C_BUS_COUNT"] = 1
self.config["HAS_SI5324"] = None
rtio_clk_period = 1e9 / rtio_clk_freq
gth = self.drtio_transceiver.gths[0]
platform.add_period_constraint(gth.txoutclk, rtio_clk_period)
platform.add_period_constraint(gth.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(self.crg.cd_sys.clk, gth.txoutclk,
gth.rxoutclk)
def __init__(self, with_sawg, **kwargs):
BaseSoC.__init__(self,
cpu_type="or1k",
sdram_controller_type="minicon",
l2_size=128*1024,
ident=artiq_version,
**kwargs)
if with_sawg:
warnings.warn("SAWG is not implemented yet with DRTIO, ignoring.")
platform = self.platform
rtio_clk_freq = 150e6
self.submodules += Microscope(platform.request("serial", 1),
self.clk_freq)
rtio_channels = []
for i in range(4):
phy = ttl_simple.Output(platform.request("user_led", i))
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
sma_io = platform.request("sma_io", 0)
self.comb += sma_io.direction.eq(1)
phy = ttl_simple.Output(sma_io.level)
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
sma_io = platform.request("sma_io", 1)
self.comb += sma_io.direction.eq(0)
phy = ttl_simple.InOut(sma_io.level)
self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy))
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
self.comb += platform.request("sfp_tx_disable", 0).eq(0)
self.submodules.drtio_transceiver = gth_ultrascale.GTH(
clock_pads=platform.request("si5324_clkout"),
data_pads=[platform.request("sfp", 0)],
sys_clk_freq=self.clk_freq,
rtio_clk_freq=rtio_clk_freq)
self.csr_devices.append("drtio_transceiver")
rx0 = ClockDomainsRenamer({"rtio_rx": "rtio_rx0"})
self.submodules.rx_synchronizer = rx0(XilinxRXSynchronizer())
self.submodules.drtio0 = rx0(DRTIOSatellite(
self.drtio_transceiver.channels[0], rtio_channels,
self.rx_synchronizer))
self.csr_devices.append("drtio0")
self.add_wb_slave(self.mem_map["drtio_aux"], 0x800,
self.drtio0.aux_controller.bus)
self.add_memory_region("drtio0_aux", self.mem_map["drtio_aux"] | self.shadow_base, 0x800)
self.config["HAS_DRTIO"] = None
self.add_csr_group("drtio", ["drtio0"])
self.add_memory_group("drtio_aux", ["drtio0_aux"])
self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
si5324_clkin = platform.request("si5324_clkin")
self.specials += \
Instance("OBUFDS",
i_I=ClockSignal("rtio_rx0"),
o_O=si5324_clkin.p, o_OB=si5324_clkin.n
)
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
self.csr_devices.append("si5324_rst_n")
i2c = self.platform.request("i2c")
self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
self.csr_devices.append("i2c")
self.config["I2C_BUS_COUNT"] = 1
self.config["HAS_SI5324"] = None
rtio_clk_period = 1e9/rtio_clk_freq
gth = self.drtio_transceiver.gths[0]
platform.add_period_constraint(gth.txoutclk, rtio_clk_period)
platform.add_period_constraint(gth.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.crg.cd_sys.clk,
gth.txoutclk, gth.rxoutclk)