def addPosition(event):
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
setStatusText("Error! Please select an area")
else:
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
selected_area.append(Frame)
mm.clear_face_selection(remote)
setStatusText("Position Added")
def import_connector(do_accept,connectorName):
# initialize connection
remote = mmRemote();
remote.connect();
setConnectorPath(connectorName)
# find center of current selection, and then shoot ray from below this point, straight upwards, and
# hope that it hits outer shell
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_ray_hit(remote, mm.addv3(sel_ctr, (0,-10,0)), (0,1,0) )
# exit out of selection tool
mm.clear_face_selection(remote)
# import part we want to position at selection
cwd = os.getcwd()
socketPath = os.path.join(cwd,'socket',connectorName)
new_objs = mm.append_objects_from_file(remote, socketPath);
# rename part
mm.set_object_name(remote, new_objs[0], ConnectorName() )
# select new part
mm.select_objects(remote, new_objs)
# get bbox of part, so that we can put origin at bottom of cylinder if desired (assume file authored that way)
(min,max) = mm.get_selected_bounding_box(remote)
partTop = ( (min[0]+max[0])/2, max[1], (min[2]+max[2])/2 )
partCenter = ( (min[0]+max[0])/2, (min[1]+max[1])/2, (min[2]+max[2])/2 )
partH = max[1]-min[1]
# RMS HACK BECAUSE OF UNITS STUPID
plane_cut_setback = partH * 0.5
# start transform tool
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = 0.5*partH
# [RMS] currently assuming that leg is oriented wrt axis, so we keep connector vertical
# compute and apply rotation
#rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z), selFrame.y )
#mm.set_toolparam(remote, "rotation", rotation )
# translate origin of part to frame origin
translate = mm.subv3( selFrame.origin, cur_origin )
# shift along frame Z to place bottom of part on surface (ie at frame origin)
translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) )
mm.set_toolparam(remote, "translation", translate )
# accept xform
if do_accept:
mm.accept_tool(remote)
remote.shutdown()
def import_connector(do_accept):
# initialize connection
remote = mmRemote();
remote.connect();
# find center of current selection, and then shoot ray from below this point, straight upwards, and
# hope that it hits outer shell
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_ray_hit(remote, mm.addv3(sel_ctr, (0,-10,0)), (0,1,0) )
# exit out of selection tool
mm.clear_face_selection(remote)
# import part we want to position at selection
cwd = os.getcwd()
socketPath = os.path.join(cwd,'socket','socket.obj')
new_objs = mm.append_objects_from_file(remote, socketPath);
# rename part
mm.set_object_name(remote, new_objs[0], ConnectorName() )
# select new part
mm.select_objects(remote, new_objs)
# get bbox of part, so that we can put origin at bottom of cylinder if desired (assume file authored that way)
(min,max) = mm.get_selected_bounding_box(remote)
partTop = ( (min[0]+max[0])/2, max[1], (min[2]+max[2])/2 )
partCenter = ( (min[0]+max[0])/2, (min[1]+max[1])/2, (min[2]+max[2])/2 )
partH = max[1]-min[1]
# RMS HACK BECAUSE OF UNITS STUPID
plane_cut_setback = partH * 0.5
# start transform tool
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = 0.5*partH
# [RMS] currently assuming that leg is oriented wrt axis, so we keep connector vertical
# compute and apply rotation
#rotation = mm.make_matrix_from_axes(selFrame.x, mm.negv3(selFrame.z), selFrame.y )
#mm.set_toolparam(remote, "rotation", rotation )
# translate origin of part to frame origin
translate = mm.subv3( selFrame.origin, cur_origin )
# shift along frame Z to place bottom of part on surface (ie at frame origin)
translate = mm.addv3( translate, mm.mulv3s( selFrame.z, dy ) )
mm.set_toolparam(remote, "translation", translate )
# accept xform
if do_accept:
mm.accept_tool(remote)
remote.shutdown()
def addPosition(event):
""" Function that is called when "Add Position" is pressed """
# check that we have a selection
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
setStatusText("Error! Please select an area")
else:
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, Frame) = mm.find_nearest(remote, sel_ctr)
selected_area.append(Frame)
mm.clear_face_selection(remote)
setStatusText("Position Added")
def connector_join():
remote = mmRemote();
remote.connect();
# accept outstanding tools, if there are any
mm.accept_tool(remote)
[found,id1] = mm.find_object_by_name(remote,SocketName())
[found,id2] = mm.find_object_by_name(remote,ConnectorName())
mm.select_objects(remote,[id1,id2])
# combine part with socket
mm.begin_tool(remote, "combine")
# select-all and do join # [TODO] support select-boundary-loops in API
mm.select_all(remote)
mm.begin_tool(remote, "join")
mm.accept_tool(remote)
# [RMS] this block will clean up holes, but requires ability to save & restore selection!
# [TODO] we can do this now, because we can read back facegroup after createFaceGroup...
if False:
# save selection
mm.begin_tool(remote, "createFaceGroup")
mm.clear_face_selection(remote)
# do repair pass, in case join created holes (happens!)
mm.begin_tool(remote, "inspector")
mm.tool_utility_command(remote, "repairAll")
# [TODO] restore selection
# expand selection a few times, then remesh
if True:
for x in range(0,8):
mm.selection_utility_command(remote, "expandByOneRing")
mm.begin_tool(remote, "remesh")
mm.accept_tool(remote)
mm.begin_tool(remote, "smooth")
mm.set_toolparam(remote, "scale", 500.0)
mm.accept_tool(remote)
mm.clear_face_selection(remote)
remote.shutdown()
def OnAdd(self, e):
global frame_dict
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
self.text.SetValue("Error! Please select an area")
else:
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
create_ring(mm.list_selected_objects(remote)[0], Frame, [8, 2, 8])
selected_area.append(Frame)
mm.clear_face_selection(remote)
dlg = wx.TextEntryDialog(self, 'What you want here',
'Text Entry Dialog', '',
wx.ICON_QUESTION | wx.OK | wx.CANCEL,
(dis_size[0] - 400, 300))
if dlg.ShowModal() == wx.ID_OK:
frame_dict[Frame] = str(dlg.GetValue())
dlg.Destroy()
self.text.SetValue("Position Added")
def addPosition(event):
obj_list = mm.list_selected_objects(remote)
mm.select_objects(remote, [obj_list[0]])
# check that we have a selection
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
setStatusText("Error! Please select an area")
else:
print("1:")
setStatusText("Computing...")
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
flag_done = 0
for size in hole_sizes:
if size in used_sizes:
continue
print("Test:" + str(size) + ":" +
str(TestFit(Frame, [size, size, size], 5)))
if TestFit(Frame, [size, size, size], 5):
print("Created size with" + str(size))
used_sizes.append(size)
create_ring(Frame, [8, 2, 8])
drill_holes(Frame, pipe_filename, [1, 0.5, 1], 0, 0)
drill_holes(Frame, hole_filename, [size, size, size], 5, 1)
flag_done = 1
break
print("2:" + str(flag_done))
if flag_done == 0:
setStatusText(
"Unable to create hole here, Please select another area")
else:
#text = ask(message = 'What do you want to do here?')
#function_call[size]=text
#pickle.dump( function_call, open( "function_dict.p", "wb" ) )
setStatusText("Position added, now you can select another area")
#selected_area.append(Frame)
mm.clear_face_selection(remote)
print "this script requires an active Face Selection"
raw_input("Press Enter to exit...")
os._exit(1)
# assumption: we have object we want to modify selected,
# and there is a selection made on this object
obj_list = mm.list_selected_objects(remote)
# find center of current selection, and then closest point on surface
# this gives us a 3D frame we can align an object to
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_nearest(remote, sel_ctr)
# exit out of selection tool
mm.clear_face_selection(remote)
for size in [0.5]:
# import part we want to position at selection
new_objs = mm.append_objects_from_file(remote, pipe_filename)
# select imported part
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", [1, size, 1])
#mm.set_toolparam(remote, "translation", [0,0,0])
mm.accept_tool(remote)
# get bbox of part, so that we can put origin at bottom of object if desired
# (we are assuming that in its file, the part is positioned at the origin, on the ground plane)
(min, max) = mm.get_selected_bounding_box(remote)
print "this script requires an active Face Selection"
raw_input("Press Enter to exit...")
os._exit(1)
# assumption: we have object we want to modify selected,
# and there is a selection made on this object
obj_list = mm.list_selected_objects(remote)
# find center of current selection, and then closest point on surface
# this gives us a 3D frame we can align an object to
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_nearest(remote, sel_ctr)
# exit out of selection tool
mm.clear_face_selection(remote)
# import part we want to position at selection
new_objs = mm.append_objects_from_file(remote, part_filename);
# select imported part
mm.select_objects(remote, new_objs)
# get bbox of part, so that we can put origin at bottom of object if desired
# (we are assuming that in its file, the part is positioned at the origin, on the ground plane)
(min,max) = mm.get_selected_bounding_box(remote)
# start transform tool
mm.begin_tool(remote, "transform")
cur_origin = mm.get_toolparam(remote, "origin")
dy = cur_origin[1] - min[1]