def parse_cq_data(json_data):
logging_output = []
for result in json_data.get('results', {}):
fields = result.get('fields', [])
if not 'action' in fields:
logging.warning('Missing field action in status record')
parsing_errors.increment_by(1)
continue
action = fields.get('action')
if action != 'verifier_jobs_update':
continue
if fields.get('verifier') != 'try job':
continue
# At the moment, much of the parsing logic assumes this is a Chromium
# tryjob.
project = fields.get('project')
if project != 'chromium/chromium/src':
logging.info('project not chromium: %s', project)
continue
job_states = fields.get('jobs', {})
for job in itertools.chain.from_iterable(job_states.values()):
try:
builder = job['builder']
result = job['result']
timestamp_tz = dateutil.parser.parse(
job.get('created_ts') or job['timestamp'])
# We assume timestamps from chromium-cq-status are already in UTC.
timestamp = timestamp_tz.replace(tzinfo=None)
except KeyError:
logging.warning('Failed to parse job details', exc_info=True)
parsing_errors.increment_by(1)
continue
if build_result.isResultPending(result):
continue
build_properties = job.get('build_properties')
if not build_properties:
logging.warning(
'Missing field build_properties in job details')
parsing_errors.increment_by(1)
continue
issue = -1
patchset = -1
time_started = 0
try:
buildnumber = get_int_value(build_properties, 'buildnumber')
if 'patch_issue' in build_properties:
issue = get_int_value(build_properties, 'patch_issue')
else: # pragma: no cover
logging.warning('no issue')
if 'patch_set' in build_properties:
patchset = get_int_value(build_properties, 'patch_set')
else: # pragma: no cover
logging.warning('no patchset')
if 'attempt_start_ts' in build_properties:
attempt_start_ts = get_int_value(build_properties,
'attempt_start_ts')
time_started = datetime.datetime.utcfromtimestamp(
attempt_start_ts / 1000000)
else: # pragma: no cover
logging.warning('no attempt_start_ts')
continue
# For builds through Buildbucket, job['master'] is actually the bucket
# name. For buildbot-based builds, it just happens to be the same as the
# master name. For Luci-based builds, it is different from the master
# name, and the master name is set as a build property instead.
# https://chromium.googlesource.com/chromium/src/+/infra/config/cr-buildbucket.cfg#115
# So in either case, the "real" master name is in the build properties.
master = build_properties['mastername']
except (ValueError, KeyError):
logging.warning('Failed to parse build properties',
exc_info=True)
parsing_errors.increment_by(1)
continue
# At this point, only success or failure.
success = build_result.isResultSuccess(result)
patchset_builder_runs = get_patchset_builder_runs(
issue=issue, patchset=patchset, master=master, builder=builder)
build_run = BuildRun(parent=patchset_builder_runs.key,
buildnumber=buildnumber,
result=result,
time_started=time_started,
time_finished=timestamp)
previous_runs = BuildRun.query(
ancestor=patchset_builder_runs.key).fetch()
duplicate = False
for previous_run in previous_runs:
# We saw this build run already or there are multiple green runs,
# in which case we ignore subsequent ones to avoid showing failures
# multiple times.
if (previous_run.buildnumber == buildnumber) or \
(build_run.is_success and previous_run.is_success) :
duplicate = True
break
if duplicate:
continue
build_run.put()
for previous_run in previous_runs:
if previous_run.is_success == build_run.is_success:
continue
if success:
# We saw the flake and then the pass.
failure_run = previous_run
success_run = build_run
else:
# We saw the pass and then the failure. Could happen when fetching
# historical data, or for the bot_update step (patch can't be
# applied cleanly anymore).
failure_run = build_run
success_run = previous_run
logging_output.append(failure_run.key.parent().get().builder +
str(failure_run.buildnumber))
# Queue a task to fetch the error of this failure and create FlakyRun.
flakes_metric.increment_by(1)
taskqueue.add(queue_name='issue-updates',
url='/issues/create_flaky_run',
params={
'failure_run_key': failure_run.key.urlsafe(),
'success_run_key': success_run.key.urlsafe()
})
return logging_output
def parse_cq_data(json_data):
logging_output = []
for result in json_data.get('results', {}):
fields = result.get('fields', [])
if not 'action' in fields:
continue
action = fields.get('action')
if action != 'verifier_jobs_update':
continue
if fields.get('verifier') != 'try job':
continue
# At the moment, much of the parsing logic assumes this is a Chromium
# tryjob.
if fields.get('project') != 'chromium':
continue
job_states = fields.get('jobs', [])
for state in job_states:
# Just go by |result|.
#if state not in ['JOB_SUCCEEDED', 'JOB_FAILED', 'JOB_TIMED_OUT']:
# continue
for job in job_states[state]:
build_properties = job.get('build_properties')
if not build_properties:
continue
try:
master = job['master']
builder = job['builder']
result = job['result']
timestamp_tz = dateutil.parser.parse(job['timestamp'])
# We assume timestamps from chromium-cq-status are already in UTC.
timestamp = timestamp_tz.replace(tzinfo=None)
except KeyError:
continue
try:
buildnumber = get_int_value(build_properties, 'buildnumber')
issue = get_int_value(build_properties, 'issue')
patchset = get_int_value(build_properties, 'patchset')
attempt_start_ts = get_int_value(build_properties, 'attempt_start_ts')
time_started = datetime.datetime.utcfromtimestamp(
attempt_start_ts / 1000000)
except ValueError:
continue
if build_result.isResultPending(result):
continue
# At this point, only success or failure.
success = build_result.isResultSuccess(result)
patchset_builder_runs = get_patchset_builder_runs(issue=issue,
patchset=patchset,
master=master,
builder=builder)
build_run = BuildRun(parent=patchset_builder_runs.key,
buildnumber=buildnumber,
result=result,
time_started=time_started,
time_finished=timestamp)
previous_runs = BuildRun.query(
ancestor=patchset_builder_runs.key).fetch()
duplicate = False
for previous_run in previous_runs:
# We saw this build run already or there are multiple green runs,
# in which case we ignore subsequent ones to avoid showing failures
# multiple times.
if (previous_run.buildnumber == buildnumber) or \
(build_run.is_success and previous_run.is_success) :
duplicate = True
break
if duplicate:
continue
build_run.put()
for previous_run in previous_runs:
if previous_run.is_success == build_run.is_success:
continue
if success:
# We saw the flake and then the pass.
failure_run = previous_run
success_run = build_run
else:
# We saw the pass and then the failure. Could happen when fetching
# historical data, or for the bot_update step (patch can't be
# applied cleanly anymore).
failure_run = build_run
success_run = previous_run
logging_output.append(failure_run.key.parent().get().builder +
str(failure_run.buildnumber))
# Queue a task to fetch the error of this failure and create FlakyRun.
flakes_metric.increment_by(1)
taskqueue.add(
queue_name='issue-updates',
url='/issues/create_flaky_run',
params={'failure_run_key': failure_run.key.urlsafe(),
'success_run_key': success_run.key.urlsafe()})
return logging_output
def parse_cq_data(json_data):
logging_output = []
for result in json_data['results']:
fields = result['fields']
if not 'action' in fields:
continue
action = fields['action']
if action != 'verifier_jobs_update':
continue
if fields['verifier'] != 'try job':
continue
job_states = fields['jobs']
for state in job_states:
# Just go by |result|.
#if state not in ['JOB_SUCCEEDED', 'JOB_FAILED', 'JOB_TIMED_OUT']:
# continue
for job in job_states[state]:
build_properties = job['build_properties']
if not build_properties:
continue
master = job['master']
builder = job['builder']
result = job['result']
timestamp = datetime.datetime.strptime(job['timestamp'],
'%Y-%m-%d %H:%M:%S.%f')
try:
buildnumber = get_int_value(build_properties, 'buildnumber')
issue = get_int_value(build_properties, 'issue')
patchset = get_int_value(build_properties, 'patchset')
except ValueError as e:
continue
if build_result.isResultPending(result):
continue
# At this point, only success or failure.
success = build_result.isResultSuccess(result)
patchset_builder_runs = get_patchset_builder_runs(issue=issue,
patchset=patchset,
master=master,
builder=builder)
build_run = BuildRun(parent=patchset_builder_runs.key,
buildnumber=buildnumber,
result=result,
time_finished=timestamp)
previous_runs = BuildRun.query(
ancestor=patchset_builder_runs.key).fetch()
duplicate = False
for previous_run in previous_runs:
# We saw this build run already or there are multiple green runs,
# in which case we ignore subsequent ones to avoid showing failures
# multiple times.
if (previous_run.buildnumber == buildnumber) or \
(build_run.is_success and previous_run.is_success) :
duplicate = True
break
if duplicate:
continue
build_run.put()
for previous_run in previous_runs:
if previous_run.is_success == build_run.is_success:
continue
if success:
# We saw the flake and then the pass.
flaky_run = FlakyRun(
failure_run=previous_run.key,
failure_run_time_finished=previous_run.time_finished,
success_run=build_run.key)
flaky_run.put()
logging_output.append(previous_run.key.parent().get().builder +
str(previous_run.buildnumber))
else:
# We saw the pass and then the failure. Could happen when fetching
# historical data.
flaky_run = FlakyRun(
failure_run=build_run.key,
failure_run_time_finished=build_run.time_finished,
success_run=previous_run.key)
flaky_run.put()
logging_output.append(build_run.key.parent().get().builder +
str(build_run.buildnumber))
# Queue a task to fetch the error of this failure.
deferred.defer(get_flaky_run_reason, flaky_run.key)
return logging_output