def deleteAllTheModelsInProject(projectName):
module_CommonResource.searchForProjectAndOpen(projectName)
# Check if the project has any models. Delete the models first
if exists("CheckBoxesInsideProjectView.png", 2):
# Click on Select All Checkbox
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
280, 338))
# Click on Delete button
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
1425, 290))
assert exists("DeleteFileMessage.png",
2), "ERROR: No delete files dialog appeared."
# Click on delete button
click(Pattern("DeleteFileMessage.png").targetOffset(-50, 60), 2)
assert not exists(
"CheckBoxesInsideProjectView.png", 5
), "ERROR: After deleting all models, still there are some undeleted ones."
# Proceed to delete the project
click(module_CommonResource.getFlair3DLogoInTheApp()) # Go to dashboard
# Go to Manage project.
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(1680, 0))
assert exists("InsideManageProjects.png"
), "ERROR: Doesn't seem like I am inside Manage Projects"
# Click on the first entry.
print "INFO: Assumed that the first project will be the latest one. So deleting it."
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
270, 145))
# Click on the delete project
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
1455, 75))
assert exists("DeleteProjectConfirmationDialog.png"
), "ERROR: Delete project dialog didn't appear."
# Click on delete
click(Pattern("DeleteProjectConfirmationDialog.png").targetOffset(80, 65))
wait(5)
# Make sure we are on the dashboard
click(module_CommonResource.getFlair3DLogoInTheApp())
wait(1)
# Now check whether the project still exists
type(Key.F5) # First refresh the page
wait(module_CommonResource.getFlair3DLogoInTheApp(), 5)
wait(1)
module_CommonResource.searchProjectByName(projectName)
searchRegion = Region(805, 250, 311, 342)
if searchRegion.exists("Balnk.png", 2):
print "INFO: Project has been successfully deleted."
else:
assert 0, "INFO: Project seems to be still there on dashboard after even deleting."
def createGivenUserAccount(username, password):
print "LOG: Creating a new account with username: %s " % username
module_CommonResource.openFlair3DCreateNewUserAccount(link, username, pwd)
print "LOG: Go to the gmail account with username:%s and verify the link." % username
answer = popAsk("Have you verified the email address?")
if not answer:
exit(1)
print "LOG: Now Check if the new login is successful."
module_CommonResource.openChrome()
module_CommonResource.openFlair3DAndLoginForGivenUser(link, username, pwd)
print "LOG: Once in, check if there is a default project and it actually works."
defaultProjectName = "Industrial building"
module_CommonResource.searchForProjectAndOpen(defaultProjectName)
module_CommonResource.selectAllAndOpenProject()
module_CommonResource.clickOnViewHome()
assert exists("InsideDefaultProject.png"), "ERROR: looks Like Model is not loaded correctly"
import os
import sys
sys.path.append(os.path.abspath('../FlairTestBed/'))
import module_CommonResource
ifLogin = 0
ifCloseChrome = 0
projectName = "Admin Building For Auto Testing"
if (ifLogin):
module_CommonResource.openChrome()
module_CommonResource.openFlair3DAndLogin()
# After signing in
module_CommonResource.searchForProjectAndOpen(projectName)
module_CommonResource.selectAllAndOpenProject()
module_CommonResource.clickOnViewHome()
def checkSearchByComponentName():
assert exists("AdminBuildingFullView.png"
), "ERROR: looks Like Model is not loaded correctly"
print "INFO: Model is loaded correctly. Switching to Search tab"
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
175, 55)) # Click on search tab
assert module_CommonResource.region_leftPanel.exists(
"SearchByMissing.png", 2), "ERROR: Search By field seems missing."
print "LOG: Select Search by Component Name"
click(module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
-45, 200)) # Click on Component Name Radio button
def checkMarkupWorkflow():
print "LOG: Start Markup Creation"
bottomToolBarFirstSection = Pattern(
"bottomToolBarFirstSection.png").targetOffset(1, 0)
print "LOG: doubleClick on roof to zoom to it"
doubleClick(
Pattern("bottomToolBarFirstSection.png").targetOffset(140, -320))
print "LOG: Click outside to unselect"
click(Pattern("bottomToolBarFirstSection.png").targetOffset(-430, 10))
print "LOG: # click on markup button"
click(Pattern("bottomToolBarFirstSection.png").targetOffset(530, 0))
print "LOG: Check if the markup window opens up"
assert exists(Pattern("markupViewDialog.png").targetOffset(
1, 0)), "ERROR: Markup dialog isn't visible."
dropdownPosition = find(
Pattern("markupViewDialog.png").targetOffset(55, -85)).getTarget()
cloudMarkupOptionPosition = find(
Pattern("markupViewDialog.png").targetOffset(70, -10)).getTarget()
markUpNameTextBoxPosition = find(
Pattern("markupViewDialog.png").targetOffset(-115, 25)).getTarget()
saveButtonPosition = find(
Pattern("markupViewDialog.png").targetOffset(95, 25)).getTarget()
closeButtonPosition = find(
Pattern("markupViewDialog.png").targetOffset(130, -130)).getTarget()
circleMarkupOptionPosition = find(
Pattern("markupViewDialog.png").targetOffset(65, -125)).getTarget()
# Enable the edit mode.
click(Pattern("markupViewDialog.png").targetOffset(-85, -85))
# Select dropdown
click(dropdownPosition)
print "LOG: Selecting the cloud markup"
click(cloudMarkupOptionPosition)
wait(0.5)
drawLocation = module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
775, 725).getTargetOffset()
dragDrop(drawLocation,
Location(drawLocation.getX() + 200,
drawLocation.getY() + 100))
# add a markup name and save
click(markUpNameTextBoxPosition) # editable textbox
assert exists(
"CloudMarkup.png"), "ERROR: Cloud markup messed while drawing"
paste("Accessible Ramp")
click(saveButtonPosition) # save
# close the markup saved message
module_CommonResource.closeThePopupMessages()
click(closeButtonPosition) # close markup
wait(0.5)
# click on forge view home
module_CommonResource.clickOnViewHome()
# click on top view
click(module_CommonResource.getFlairWindowControls().targetOffset(50, 75))
wait(0.5)
# new markup a circle perhaps.
print "LOG: Start with the Circle Markup now"
print "LOG: doubleClick on second Panel of the top row of sunroof"
doubleClick(
Pattern("bottomToolBarFirstSection.png").targetOffset(285, -515))
click(Pattern("bottomToolBarFirstSection.png").targetOffset(
-140, -70)) # click outside to unselect
click(Pattern("bottomToolBarFirstSection.png").targetOffset(
530, 0)) # click on markup button
print "LOG: Check if the markup window opens up"
assert exists(Pattern("markupViewDialog.png").targetOffset(
1, 0)), "ERROR: Markup dialog isn't visible."
print "LOG: Enable the edit mode."
click(Pattern("markupViewDialog.png").targetOffset(-85, -85))
# Select new markup
click(dropdownPosition)
# Select circle markup
click(circleMarkupOptionPosition)
wait(0.5)
drawLocation = module_CommonResource.getFlair3DLogoInTheApp().targetOffset(
1350, 225).getTargetOffset()
print drawLocation
dragDrop(drawLocation,
Location(drawLocation.getX() + 200,
drawLocation.getY() + 200))
dragDrop(drawLocation,
Location(drawLocation.getX() + 100,
drawLocation.getY() +
100)) # draw two so that we can easily identify
print "LG: add a markup name and save the circle markup"
click(markUpNameTextBoxPosition) # editable textbox
assert exists(
"CircleMarkups.png"), "ERROR: Circle markup messed while drawing"
paste("Roof Panel Position")
click(saveButtonPosition) # save
# close the markup saved message
module_CommonResource.closeThePopupMessages()
click(closeButtonPosition) # close markup
# Check if both the markups are saved properly
def checkMarkupsAreSavedCorrectly():
click(Pattern("bottomToolBarFirstSection.png").targetOffset(
530, 0)) # click on markup button
assert exists(Pattern("TwoMarkupEntries.png").targetOffset(
0, 1)), "ERROR: Markups are not shown in the UI"
# click on 1st markup and check if the view shows it appropriately
click(Pattern("TwoMarkupEntries.png").targetOffset(
-85, -20)) # select 1st cloud markup
assert exists((Pattern("CloudMarkup.png").similar(0.80)
)), "ERROR: Something wrong with the 1st cloud Markup"
click(Pattern("TwoMarkupEntries.png").targetOffset(
-85, 20)) # select second markup
assert exists(
"CircleMarkups.png"), "ERROR: Something wrong with the 1st Markup"
checkMarkupsAreSavedCorrectly()
print(
"INFO: Both markups seems correct. In the same session. Let's check for different session."
)
# Go to project view and open project again
click(module_CommonResource.getFlair3DLogoInTheApp())
wait(0.5)
type(Key.F5) # Refresh the page
wait(2)
module_CommonResource.searchForProjectAndOpen(projectName)
module_CommonResource.selectAllAndOpenProject()
# Now check if the markups are showing up in this session
checkMarkupsAreSavedCorrectly()
print(
"INFO: Both markups seems correct in this session as well. Let's proceed to delete"
)
# delete the markups.
deleteFirstMarkupPosition = find(
Pattern("TwoMarkupEntries.png").targetOffset(115, -15)).getTarget()
click(deleteFirstMarkupPosition) # delete first markup
click(Pattern("MarkupDeleteConfirmation.png").targetOffset(
35, 60)) # confirm delete
print "LOG: Now deleteing the remaining markup which should be at the place of 1st"
click(deleteFirstMarkupPosition) # delete second markup
click(Pattern("MarkupDeleteConfirmation.png").targetOffset(
35, 60)) # confirm delete
assert not exists(
Pattern("TwoMarkupEntries.png").similar(0.90).targetOffset(
1, 0)), "ERROR: Markups are still showing in the UI"
# Prepare to close.
click(closeButtonPosition) # close markup