def get_bulk_email(site, filename):
""" Show a specific bulk email saved on the disk """
save_path = get_log_dir(site)
join = os.path.join
if save_path:
save_path = join(save_path, 'sent-bulk')
if os.path.isdir(save_path):
message_path = join(save_path, filename)
try:
message_file = open(message_path, 'r+')
except IOError:
return None
mail = message_from_file(message_file)
message_file.close()
# Prepare the date to be formatted with utShowFullDateTime
date = email_utils.parsedate_tz(mail.get('Date', ''))
date = email_utils.mktime_tz(date)
date = datetime.fromtimestamp(date)
return {
'subject': mail.get('Subject', '(no-subject)'),
'content': mail.get_payload(decode=True).replace(
'\n\n', '</p><p>').replace('\n', '<br/>'),
'recipients': mail.get_all('To'),
'sender': mail.get('From'),
'date': date,
}
def get_webex_email(site, filename, where_to_read="sent-webex"):
""" Show a specific webex email saved on the disk """
save_path = get_log_dir(site)
join = os.path.join
if save_path:
save_path = join(save_path, where_to_read)
if os.path.isdir(save_path):
message_path = join(save_path, filename)
try:
message_file = open(message_path, "r+")
except IOError:
return None
mail = message_from_file(message_file)
message_file.close()
# Prepare the date to be formatted with utShowFullDateTime
date = email_utils.parsedate_tz(mail.get("Date", ""))
date = email_utils.mktime_tz(date)
date = datetime.fromtimestamp(date)
return {
"subject": mail.get("Subject", "(no-subject)"),
"content": mail.get_payload(decode=True).replace("\n\n", "</p><p>").replace("\n", "<br/>"),
"recipients": mail.get_all("To"),
"sender": mail.get("From"),
"date": date,
"webex": mail.get("X-Accept-Webex-Data", ""),
}
def get_webex_email(site, filename, where_to_read='sent-webex'):
""" Show a specific webex email saved on the disk """
save_path = get_log_dir(site)
join = os.path.join
if save_path:
save_path = join(save_path, where_to_read)
if os.path.isdir(save_path):
message_path = join(save_path, filename)
try:
message_file = open(message_path, 'r+')
except IOError:
return None
mail = message_from_file(message_file)
message_file.close()
# Prepare the date to be formatted with utShowFullDateTime
date = email_utils.parsedate_tz(mail.get('Date', ''))
date = email_utils.mktime_tz(date)
date = datetime.fromtimestamp(date)
return {
'subject': mail.get('Subject', '(no-subject)'),
'content': mail.get_payload(decode=True).replace(
'\n\n', '</p><p>').replace('\n', '<br/>'),
'recipients': mail.get_all('To'),
'sender': mail.get('From'),
'date': date,
'webex': mail.get('X-Accept-Webex-Data', '')
}
def _get_message_path(site, where_to_read):
save_path = get_log_dir(site)
if not save_path:
return None
save_path = os.path.join(save_path, where_to_read)
if not os.path.isdir(save_path):
return None
return save_path
def _get_message_path(site, where_to_read):
save_path = get_log_dir(site)
if not save_path:
return None
save_path = os.path.join(save_path, where_to_read)
if not os.path.isdir(save_path):
return None
return save_path
def save_webex_email(site,
addr_to,
addr_from,
subject,
content,
where_to_save='sent-webex',
others=None):
"""
Save webex email on disk.
`addr_to` is a list; if there is more than one recipient,
adds a 'To' header with each email address.
"""
save_path = get_log_dir(site)
join = os.path.join
filename = None
if save_path:
save_path = join(save_path, where_to_save)
if not os.path.exists(save_path):
os.makedirs(save_path)
# Generate email filename according to zope.sendmail.maildir
# but instead of hostname use site_id
randmax = 0x7fffffff
timestamp = int(time.time())
unique = '%d.%d.%s.%d' % (timestamp, os.getpid(), site.getId(),
random.randrange(randmax))
filename = join(save_path, unique)
message_file = os.open(filename, os.O_CREAT | os.O_EXCL | os.O_WRONLY,
0600)
generator = email_generator.Generator(os.fdopen(message_file, 'w'))
# Add multiple 'To' headers if there is more than one recipient
if len(addr_to) > 1:
email_message = create_message(content, addr_to[0], addr_from,
subject)
addr_to.remove(addr_to[0])
for mail in addr_to:
email_message['To'] = mail
else:
email_message = create_message(content, addr_to, addr_from,
subject)
# hide meeting info in header field
email_message['X-Accept-Webex-Data'] = json.dumps(others)
# Save email in specified file
generator.flatten(email_message)
else:
mail_logger.warning("The webex email could not be saved on the disk."
"There is missing configuration(SITES_LOG_PATH)."
"Please contact the platform maintainers.")
return filename
def save_bulk_email(site,
addr_to,
addr_from,
subject,
content,
where_to_save='sent-bulk',
addr_cc=[]):
"""
Save bulk email on disk.
`addr_to` is a list; if there is more than one recipient,
adds a 'To' header with each email address.
"""
save_path = get_log_dir(site)
join = os.path.join
filename = None
if save_path:
save_path = join(save_path, where_to_save)
if not os.path.exists(save_path):
os.makedirs(save_path)
# Generate email filename according to zope.sendmail.maildir
# but instead of hostname use site_id
randmax = 0x7fffffff
timestamp = int(time.time())
unique = '%d.%d.%s.%d' % (timestamp, os.getpid(), site.getId(),
random.randrange(randmax))
filename = join(save_path, unique)
message_file = os.open(filename, os.O_CREAT | os.O_EXCL | os.O_WRONLY,
0600)
generator = email_generator.Generator(os.fdopen(message_file, 'w'))
# Add multiple 'To' headers if there is more one receipent
if len(addr_to) > 1:
email_message = create_message(content, addr_to[0], addr_from,
subject)
addr_to.remove(addr_to[0])
for mail in addr_to:
email_message['To'] = mail
else:
email_message = create_message(content, addr_to, addr_from,
subject)
for mail in addr_cc:
email_message['Cc'] = mail
# Save email in specified file
generator.flatten(email_message)
else:
mail_logger.warning("The bulk email could not be saved on the disk."
" Missing configuration for SITES_LOG_PATH?")
return filename
def save_webex_email(site, addr_to, addr_from, subject, content,
where_to_save='sent-webex', others=None):
"""
Save webex email on disk.
`addr_to` is a list; if there is more than one recipient,
adds a 'To' header with each email address.
"""
save_path = get_log_dir(site)
join = os.path.join
filename = None
if save_path:
save_path = join(save_path, where_to_save)
if not os.path.exists(save_path):
os.makedirs(save_path)
# Generate email filename according to zope.sendmail.maildir
# but instead of hostname use site_id
randmax = 0x7fffffff
timestamp = int(time.time())
unique = '%d.%d.%s.%d' % (timestamp, os.getpid(), site.getId(),
random.randrange(randmax))
filename = join(save_path, unique)
message_file = os.open(filename,
os.O_CREAT | os.O_EXCL | os.O_WRONLY,
0600)
generator = email_generator.Generator(os.fdopen(message_file, 'w'))
# Add multiple 'To' headers if there is more than one recipient
if len(addr_to) > 1:
email_message = create_message(content, addr_to[0], addr_from,
subject)
addr_to.remove(addr_to[0])
for mail in addr_to:
email_message['To'] = mail
else:
email_message = create_message(content, addr_to, addr_from,
subject)
# hide meeting info in header field
email_message['X-Accept-Webex-Data'] = json.dumps(others)
# Save email in specified file
generator.flatten(email_message)
else:
mail_logger.warning("The webex email could not be saved on the disk."
"There is missing configuration(SITES_LOG_PATH)."
"Please contact the platform maintainers.")
return filename
def save_bulk_email(site, addr_to, addr_from, subject, content,
where_to_save='sent-bulk', addr_cc=[]):
"""
Save bulk email on disk.
`addr_to` is a list; if there is more than one recipient,
adds a 'To' header with each email address.
"""
save_path = get_log_dir(site)
join = os.path.join
filename = None
if save_path:
save_path = join(save_path, where_to_save)
if not os.path.exists(save_path):
os.makedirs(save_path)
# Generate email filename according to zope.sendmail.maildir
# but instead of hostname use site_id
randmax = 0x7fffffff
timestamp = int(time.time())
unique = '%d.%d.%s.%d' % (timestamp, os.getpid(), site.getId(),
random.randrange(randmax))
filename = join(save_path, unique)
message_file = os.open(filename,
os.O_CREAT|os.O_EXCL|os.O_WRONLY,
0600)
generator = email_generator.Generator(os.fdopen(message_file, 'w'))
# Add multiple 'To' headers if there is more one receipent
if len(addr_to) > 1:
email_message = create_message(content, addr_to[0], addr_from,
subject)
addr_to.remove(addr_to[0])
for mail in addr_to:
email_message['To'] = mail
else:
email_message = create_message(content, addr_to, addr_from,
subject)
for mail in addr_cc:
email_message['Cc'] = mail
# Save email in specified file
generator.flatten(email_message)
else:
mail_logger.warning("The bulk email could not be saved on the disk."
" Missing configuration for SITES_LOG_PATH?")
return filename
def get_bulk_emails(site):
""" Show all bulk emails saved on the disk """
save_path = get_log_dir(site)
join = os.path.join
emails = []
if save_path:
save_path = join(save_path, 'sent-bulk')
if os.path.isdir(save_path):
# Get all messages files
messages = [join(save_path, filename)
for filename in os.listdir(save_path)
if not filename.startswith('.')]
# Sort them descending by the last modification time
sorted_messages = [(message, os.path.getmtime(message))
for message in messages]
sorted_messages.sort(key=lambda x: x[1], reverse=True)
messages = [message[0] for message in sorted_messages]
for message in messages:
message_file = open(message, 'r+')
mail = message_from_file(message_file)
message_file.close()
# Prepare the date to be formatted with utShowFullDateTime
date = email_utils.parsedate_tz(mail.get('Date', ''))
date = email_utils.mktime_tz(date)
date = datetime.fromtimestamp(date)
emails.append({
'subject': mail.get('Subject', '(no-subject)'),
'content': mail.get_payload(decode=True),
'recipients': mail.get_all('To'),
'sender': mail.get('From'),
'date': date,
'filename': os.path.split(message)[-1]
})
return emails
