def set_media_transceiver(interface_obj):
# get front panel port from ifindex
if_obj = cps_object.CPSObject(obj=interface_obj)
npu = if_obj.get_attr_data('base-if-phy/if/interfaces/interface/npu-id')
port = if_obj.get_attr_data('base-if-phy/if/interfaces/interface/port-id')
print "set_media_transceiver for %d %d " % (npu, port)
enable = if_obj.get_attr_data('if/interfaces/interface/enabled')
port_list = nas_if.nas_os_phy_list(d={'npu-id': npu, 'port-id': port})
phy_obj = cps_object.CPSObject(obj=port_list[0])
fanout = phy_obj.get_attr_data('fanout-mode')
try:
hwport = phy_obj.get_attr_data('hardware-port-id')
fp_details = fp.find_port_by_hwport(npu, hwport)
except:
print " Error in setting media Transceiver for ", if_obj.get_attr_data(
'name')
return
# set media transceiver using media Id and channel ID
# in case of 40G mode all channels should be enabled/disabled
# else only one channel.
#
print "fanout " + str(fanout)
if fanout == 2: # then it is in 4x10G fanout mode BASE_PORT_BREAKOUT_MODE_BREAKOUT_4X1
_lane = fp_details.lane
else: # non-fanout mode 1x40g mode
_lane = None # enable/disable all channels. Do not pass Lane #
media.media_transceiver_set(1, fp_details.media_id, _lane, enable)
def set_media_transceiver(interface_obj):
# get front panel port from ifindex
if_obj = cps_object.CPSObject(obj=interface_obj)
npu = if_obj.get_attr_data('base-if-phy/if/interfaces/interface/npu-id')
port = if_obj.get_attr_data('base-if-phy/if/interfaces/interface/port-id')
enable = if_obj.get_attr_data('if/interfaces/interface/enabled')
nas_if.log_info("set_media_transceiver as " + str(enable) + " for " +
str(npu) + " , " + str(port))
port_list = nas_if.nas_os_phy_list(d={'npu-id': npu, 'port-id': port})
phy_obj = cps_object.CPSObject(obj=port_list[0])
try:
hwport_list = phy_obj.get_attr_data('hardware-port-list')
except:
nas_if.log_err(" Error in setting media Transceiver for %s" %
if_obj.get_attr_data('name'))
return
# set media transceiver using media Id and channel ID
#
for hwport in hwport_list:
fp_details = fp.find_port_by_hwport(npu, hwport)
if fp_details.port_group_id is None:
_lane = fp_details.lane
else:
pg_list = fp.get_port_group_list()
pg_obj = pg_list[fp_details.port_group_id]
if ((pg_obj.get_profile_type()) == "ethernet_ddqsfp28"):
_lane = pg_obj.get_lane(hwport)
else:
_lane = fp_details.lane
media.media_transceiver_set(1, fp_details.media_id, _lane, enable)
def set_media_transceiver(interface_obj):
# get front panel port from ifindex
if_obj = cps_object.CPSObject(obj=interface_obj)
npu = if_obj.get_attr_data('base-if-phy/if/interfaces/interface/npu-id')
port = if_obj.get_attr_data('base-if-phy/if/interfaces/interface/port-id')
print "set_media_transceiver for %d %d " %(npu, port)
enable = if_obj.get_attr_data('if/interfaces/interface/enabled')
port_list = nas_if.nas_os_phy_list(
d={'npu-id': npu, 'port-id': port})
phy_obj = cps_object.CPSObject(obj=port_list[0])
fanout = phy_obj.get_attr_data('fanout-mode')
try:
hwport = phy_obj.get_attr_data('hardware-port-id')
fp_details = fp.find_port_by_hwport(npu, hwport)
except:
print " Error in setting media Transceiver for ", if_obj.get_attr_data('name')
return
# set media transceiver using media Id and channel ID
# in case of 40G mode all channels should be enabled/disabled
# else only one channel.
#
print "fanout " + str(fanout)
if fanout == 2: # then it is in 4x10G fanout mode BASE_PORT_BREAKOUT_MODE_BREAKOUT_4X1
_lane = fp_details.lane
else: # non-fanout mode 1x40g mode
_lane = None # enable/disable all channels. Do not pass Lane #
media.media_transceiver_set(1, fp_details.media_id, _lane, enable)
def if_media_type_set(pas_media_obj):
try:
media_id = pas_media_obj.get_attr_data('port')
media_type = pas_media_obj.get_attr_data('type')
except:
nas_if.log_info(
"media Id or media type is not present in the media event")
return
# fetch FP info from media ID
l = nas_if.nas_os_fp_list(d={'media-id': media_id})
if len(l) == 0:
nas_if.log_err("No such port found... for media " + str(media_id))
return
#fetching 2 front panel port object from 1 phy media id for QSFP28-DD ports
port_list = []
for fp_obj in l:
obj = cps_object.CPSObject(obj=fp_obj)
if _fp_port_key == obj.get_key():
port_list = port_list + nas_if.physical_ports_for_front_panel_port(
obj)
if len(port_list) == 0:
nas_if.log_err("There are no physical ports for front panel port ")
nas_if.log_err(l[0])
return
# create interface set RPC obj for each phy port in the list and send it
for p in port_list:
npu = p.get_attr_data('npu-id')
port = p.get_attr_data('port-id')
hwport_list = p.get_attr_data('hardware-port-list')
nas_if.log_info("send if rpc for media id set for phy port " +
str(port))
ifobj = cps_object.CPSObject(
module='dell-base-if-cmn/set-interface',
data={
'dell-base-if-cmn/set-interface/input/operation': 3,
'base-if-phy/if/interfaces/interface/npu-id': npu,
'base-if-phy/if/interfaces/interface/port-id': port,
'base-if-phy/if/interfaces/interface/phy-media': media_type,
'if/interfaces/interface/type': "ianaift:ethernetCsmacd"
})
ch = {'operation': 'rpc', 'change': ifobj.get()}
cps.transaction([ch])
if_name = str(
ch['change']['data']['if/interfaces/interface/name'])[:-1]
if_details = nas_if.nas_os_if_list(
d={'if/interfaces/interface/name': if_name})
enable = ba.from_ba(
if_details[0]['data']['if/interfaces/interface/enabled'],
"uint64_t")
for hwport in hwport_list:
fp_details = fp.find_port_by_hwport(npu, hwport)
_lane = fp_details.lane
media_transceiver_set(1, fp_details.media_id, _lane, enable)
nas_if.log_info("setting media id: " + str(media_id) + " media type: " +
str(media_type))
def if_media_type_set(pas_media_obj):
try:
media_id = pas_media_obj.get_attr_data('port')
media_type = pas_media_obj.get_attr_data('type')
except:
nas_if.log_err(
"media Id or media type is not present in the media event")
return
# fetch FP info from media ID
l = nas_if.nas_os_fp_list(d={'media-id': media_id})
if len(l) == 0:
nas_if.log_err("No such port found... for media " + str(media_id))
return
# fetch PHY port list for the FP port
port_list = nas_if.physical_ports_for_front_panel_port(
cps_object.CPSObject(obj=l[0]))
if len(port_list) == 0:
nas_if.log_err("There are no physical ports for front panel port ")
nas_if.log_err(l[0])
return
# create interface set RPC obj for each phy port in the list and send it
for p in port_list:
npu = p.get_attr_data('npu-id')
port = p.get_attr_data('port-id')
fanout = p.get_attr_data('fanout-mode')
hwport = p.get_attr_data('hardware-port-id')
nas_if.log_info("send if rpc for media id set for phy port " +
str(port))
ifobj = cps_object.CPSObject(
module='dell-base-if-cmn/set-interface',
data={
'dell-base-if-cmn/set-interface/input/operation': 3,
'base-if-phy/if/interfaces/interface/npu-id': npu,
'base-if-phy/if/interfaces/interface/port-id': port,
'base-if-phy/if/interfaces/interface/phy-media': media_type,
'if/interfaces/interface/type': "ianaift:ethernetCsmacd"
})
ch = {'operation': 'rpc', 'change': ifobj.get()}
cps.transaction([ch])
if_name = ba.ba_to_str(
ch['change']['data']['if/interfaces/interface/name'],
len(_if_name))
if_details = nas_if.nas_os_if_list(
d={'if/interfaces/interface/name': if_name})
enable = ba.from_ba(
if_details[0]['data']['if/interfaces/interface/enabled'],
"uint64_t")
fp_details = fp.find_port_by_hwport(npu, hwport)
if fanout == 2: # then it is in 4x10G fanout mode BASE_PORT_BREAKOUT_MODE_BREAKOUT_4X1
_lane = fp_details.lane
else: # non-fanout mode 1x40g mode
_lane = None # enable/disable all channels. Do not pass Lane #
media_transceiver_set(1, fp_details.media_id, _lane, enable)
nas_if.log_info("setting media id: " + str(media_id) + " media type: " +
str(media_type))
def set_media_type_on_port_create(phy_obj):
hwport = phy_obj.get_attr_data('hardware-port-id')
if hwport <= 0:
return
npu = phy_obj.get_attr_data('npu-id')
port_id = phy_obj.get_attr_data('port-id')
fp_port_details = fp.find_port_by_hwport(npu, hwport)
if fp_port_details is None:
return
# Fetch media info from PAS
pas_media_list = media.get_media_info(fp_port_details.media_id)
pas_media_obj = cps_object.CPSObject(obj=pas_media_list[0])
media.nas_set_media_type_by_phy_port(npu, port_id,
pas_media_obj.get_attr_data('type'))
def set_media_type_on_port_create(phy_obj):
hwport = phy_obj.get_attr_data('hardware-port-id')
if hwport <= 0:
return
npu = phy_obj.get_attr_data('npu-id')
port_id = phy_obj.get_attr_data('port-id')
fp_port_details = fp.find_port_by_hwport(npu, hwport)
if fp_port_details is None:
return
# Fetch media info from PAS
pas_media_list = media.get_media_info(fp_port_details.media_id)
pas_media_obj = cps_object.CPSObject(obj=pas_media_list[0])
media.nas_set_media_type_by_phy_port(npu, port_id,
pas_media_obj.get_attr_data('type'))
def set_intf_request(pas_media_obj):
try:
media_id = pas_media_obj.get_attr_data('port')
display_str = pas_media_obj.get_attr_data(
'base-pas/media/display-string')
except:
nas_if.log_info("Media String is not present in the media event")
return
# fetch FP info from media ID
o = cps_object.CPSObject(
module='base-if-phy/front-panel-port',
data={'base-if-phy/front-panel-port/media-id': media_id})
l = []
fp_utils.gen_fp_port_list(o, l)
if len(l) == 0:
nas_if.log_err("No such port found... for media " + str(media_id))
return
#fetching 2 front panel port object from 1 phy media id for QSFP28-DD ports
port_list = []
for fp_obj in l:
obj = cps_object.CPSObject(obj=fp_obj)
if nas_comm.yang.get_value('fp_key', 'keys_id') == obj.get_key():
port_list = port_list + nas_if.physical_ports_for_front_panel_port(
obj)
if len(port_list) == 0:
nas_if.log_err("There are no physical ports for front panel port ")
nas_if.log_err(str(l[0]))
return
# create interface set RPC obj for each phy port in the list and send it
for p in port_list:
npu = p.get_attr_data('npu-id')
port = p.get_attr_data('port-id')
process_media_event(npu, port, pas_media_obj)
hwport_list = p.get_attr_data('hardware-port-list')
nas_if.log_info("send if obj for media id set for phy port " +
str(port))
ifobj = cps_object.CPSObject(
module='dell-base-if-cmn/if/interfaces/interface',
data={
'base-if-phy/if/interfaces/interface/npu-id': npu,
'base-if-phy/if/interfaces/interface/port-id': port,
'if/interfaces/interface/type': "ianaift:ethernetCsmacd"
})
if if_lib.set_media_setting(None, ifobj) == False:
return
ch = {'operation': 'set', 'change': ifobj.get()}
cps.transaction([ch])
if_name = if_config.if_config_get_by_npu_port(npu, port)
if_details = nas_if.nas_os_if_list(
d={'if/interfaces/interface/name': if_name})
enable = ba.from_ba(
if_details[0]['data']['if/interfaces/interface/enabled'],
"uint64_t")
for hwport in hwport_list:
fp_details = fp.find_port_by_hwport(npu, hwport)
if fp_details.port_group_id is None:
_lane = fp_details.lane
else:
pg_list = fp.get_port_group_list()
pg_obj = pg_list[fp_details.port_group_id]
if ((pg_obj.get_profile_type()) == "ethernet_ddqsfp28"):
_lane = pg_obj.get_lane(hwport)
else:
_lane = fp_details.lane
media.media_transceiver_set(1, fp_details.media_id, _lane, enable)
