def show_fit_results(self, results, average, qc_pass):
self.response_plot.plot(average.time_values, average.data, pen='b')
psp = StackedPsp()
t = average.time_values
v = psp.eval(x=t, **results.best_values)
pen = {'color': (0, 150, 0) if qc_pass else (255, 100, 0), 'width': 2}
self.response_plot.plot(t, v, pen=pen)
def show_expected_fit(self, fit_params, qc_pass):
psp = StackedPsp()
t = np.linspace(-10e-3, 20e-3, 1000)
v = psp.eval(x=t, **fit_params)
pen = {
'color': (0, 150, 0) if qc_pass else (255, 100, 0),
'dash': [5, 5]
}
self.response_plot.plot(t, v, pen=pen, zValue=10)
def plot_all(self):
self.plots.clear()
self.plots.set_shape(len(self.sorted_recs), 1)
psp = StackedPsp()
stim_keys = sorted(list(self.sorted_recs.keys()))
for i, stim_key in enumerate(stim_keys):
prs = self.sorted_recs[stim_key]
plt = self.plots[i, 0]
plt.setTitle("%s %0.0f Hz %0.2f s" % stim_key)
for recording in prs:
pulses = sorted(list(prs[recording].keys()))
for pulse_n in pulses:
rec = prs[recording][pulse_n]
# spike-align pulse + offset for pulse number
spike_t = rec.stim_pulse.first_spike_time
if spike_t is None:
spike_t = rec.stim_pulse.onset_time + 1e-3
qc_pass = rec.pulse_response.in_qc_pass if rec.synapse.synapse_type == 'in' else rec.pulse_response.ex_qc_pass
pen = (255, 255, 255, 100) if qc_pass else (100, 0, 0, 100)
t0 = rec.pulse_response.data_start_time - spike_t
ts = TSeries(data=rec.data,
t0=t0,
sample_rate=db.default_sample_rate)
c = plt.plot(ts.time_values, ts.data, pen=pen)
# arrange plots nicely
shift = (pulse_n * 35e-3 + (30e-3 if pulse_n > 8 else 0),
0)
c.setPos(*shift)
if not qc_pass:
c.setZValue(-10)
continue
# evaluate recorded fit for this response
fit_par = rec.pulse_response_fit
if fit_par.fit_amp is None:
continue
fit = psp.eval(
x=ts.time_values,
exp_amp=fit_par.fit_exp_amp,
exp_tau=fit_par.fit_decay_tau,
amp=fit_par.fit_amp,
rise_time=fit_par.fit_rise_time,
decay_tau=fit_par.fit_decay_tau,
xoffset=fit_par.fit_latency,
yoffset=fit_par.fit_yoffset,
rise_power=2,
)
c = plt.plot(ts.time_values, fit, pen=(0, 255, 0, 100))
c.setZValue(10)
c.setPos(*shift)
def fit_psp(response, mode='ic', sign='any', xoffset=11e-3, yoffset=(0, 'fixed'), mask_stim_artifact=True, method='leastsq', fit_kws=None, **kwds):
t = response.time_values
y = response.data
if mode == 'ic':
amp = .2e-3
amp_max = 100e-3
rise_time = 5e-3
decay_tau = 50e-3
elif mode == 'vc':
amp = 20e-12
amp_max = 500e-12
rise_time = 1e-3
decay_tau = 4e-3
else:
raise ValueError('mode must be "ic" or "vc"')
amps = [(amp, 0, amp_max), (-amp, -amp_max, 0)]
if sign == '-':
amps = amps[1:]
elif sign == '+':
amps = amps[:1]
elif sign != 'any':
raise ValueError('sign must be "+", "-", or "any"')
psp = StackedPsp()
base_params = {
'xoffset': (xoffset, 10e-3, 15e-3),
'yoffset': yoffset,
'rise_time': (rise_time, rise_time/2., rise_time*2.),
'decay_tau': (decay_tau, decay_tau/10., decay_tau*10.),
'exp_amp': 'amp * amp_ratio',
'amp_ratio': (1, 0, 10),
'rise_power': (2, 'fixed'),
}
if 'rise_time' in kwds:
rt = kwds.pop('rise_time')
if not isinstance(rt, tuple):
rt = (rt, rt/2., rt*2.)
base_params['rise_time'] = rt
if 'decay_tau' in kwds:
dt = kwds.pop('decay_tau')
if not isinstance(dt, tuple):
dt = (dt, dt/2., dt*2.)
base_params['decay_tau'] = dt
base_params.update(kwds)
params = []
for amp, amp_min, amp_max in amps:
p2 = base_params.copy()
p2['amp'] = (amp, amp_min, amp_max)
params.append(p2)
dt = response.dt
weight = np.ones(len(y))
#weight[:int(10e-3/dt)] = 0.5
if mask_stim_artifact:
# Use zero weight for fit region around the stimulus artifact
weight[int(10e-3/dt):int(12e-3/dt)] = 0
weight[int(12e-3/dt):int(19e-3/dt)] = 30
if fit_kws is None:
fit_kws = {'xtol': 1e-4, 'maxfev': 300, 'nan_policy': 'omit'}
if 'weight' not in fit_kws:
fit_kws['weights'] = weight
best_fit = None
best_score = None
for p in params:
fit = psp.fit(y, x=t, params=p, fit_kws=fit_kws, method=method)
err = np.sum(fit.residual**2)
if best_fit is None or err < best_score:
best_fit = fit
best_score = err
fit = best_fit
# nrmse = fit.nrmse()
if 'baseline_std' in response.meta:
fit.snr = abs(fit.best_values['amp']) / response.meta['baseline_std']
fit.err = fit.rmse() / response.meta['baseline_std']
# print fit.best_values
# print "RMSE:", fit.rmse()
# print "NRMSE:", nrmse
# print "SNR:", snr
return fit
def load_saved_fit(self, record):
data = record.notes
pair_params = {'Synapse call': data['synapse_type'], 'Gap junction call': data['gap_junction']}
self.ctrl_panel.update_user_params(**pair_params)
self.warnings = data.get('fit_warnings', [])
self.ctrl_panel.output_params.child('Warnings').setValue('\n'.join(self.warnings))
self.ctrl_panel.output_params.child('Comments', '').setValue(data.get('comments', ''))
# some records may be stored with no fit if a synapse is not present.
if 'fit_parameters' not in data:
return
self.fit_params = data['fit_parameters']
self.ctrl_panel.update_fit_params(data['fit_parameters']['fit'])
self.output_fit_parameters = data['fit_parameters']['fit']
self.initial_fit_parameters = data['fit_parameters']['initial']
initial_vc_latency = (
data['fit_parameters']['initial']['vc']['-55'].get('xoffset') or
data['fit_parameters']['initial']['vc']['-70'].get('xoffset') or
1e-3
)
initial_ic_latency = (
data['fit_parameters']['initial']['ic']['-55'].get('xoffset') or
data['fit_parameters']['initial']['ic']['-70'].get('xoffset') or
1e-3
)
latency_diff = np.diff([initial_vc_latency, initial_ic_latency])[0]
if abs(latency_diff) < 100e-6:
self.latency_superline.set_value(initial_vc_latency, block_fit=True)
else:
fit_pass_vc = [data['fit_pass']['vc'][str(h)] for h in holdings]
fit_pass_ic = [data['fit_pass']['ic'][str(h)] for h in holdings]
if any(fit_pass_vc):
self.latency_superline.set_value(initial_vc_latency, block_fit=True)
elif any(fit_pass_ic):
self.latency_superline.set_value(initial_ic_latency, block_fit=True)
else:
self.latency_superline.set_value(initial_vc_latency, block_fit=True)
for mode in modes:
for holding in holdings:
fit_pass = data['fit_pass'][mode][str(holding)]
self.ctrl_panel.output_params.child('Fit parameters', str(holding) + ' ' + mode.upper(), 'Fit Pass').setValue(fit_pass)
fit_params = copy.deepcopy(data['fit_parameters']['fit'][mode][str(holding)])
if fit_params:
fit_params.pop('nrmse', None)
if mode == 'ic':
p = StackedPsp()
if mode == 'vc':
p = Psp()
# make a list of spike-aligned postsynaptic tseries
tsl = PulseResponseList(self.sorted_responses[mode, holding]['qc_pass']).post_tseries(align='spike', bsub=True)
if len(tsl) == 0:
continue
# average all together
avg = tsl.mean()
fit_params.setdefault('exp_tau', fit_params['decay_tau'])
fit_psp = p.eval(x=avg.time_values, **fit_params)
fit_tseries = avg.copy(data=fit_psp)
if mode == 'vc':
self.vc_plot.plot_fit(fit_tseries, holding, fit_pass=fit_pass)
if mode == 'ic':
self.ic_plot.plot_fit(fit_tseries, holding, fit_pass=fit_pass)
def fit_psp(response,
mode='ic',
sign='any', #Note this will not be used if *amp* input is specified
method='leastsq',
fit_kws=None,
stacked=True,
rise_time_mult_factor=10., #Note this will not be used if *rise_time* input is specified
weight='default',
amp_ratio='default',
# the following are parameters that can be fit
amp='default',
decay_tau='default',
rise_power='default',
rise_time='default',
exp_amp='default',
xoffset='default',
yoffset='default',
):
"""Fit psp. function to the equation
This function make assumptions about where the cross talk happens as traces
have been aligned to the pulses and response.t0 has been set to zero
Parameters
----------
response : neuroanalysis.data.Trace class
Contains data on trace waveform.
mode : string
either 'ic' for current clamp or 'vc' for voltage clamp
sign : string
Specifies the sign of the PSP deflection. Must be '+', '-', or any. If *amp*
is specified, value will be irrelevant.
method : string
Method lmfit uses for optimization
rise_time_mult_factor: float
Parameter that goes into the default calculation rise time.
Note that if an input for *rise_time* is provided this input
will be irrelevant.
stacked : True or False
If true, use the StackedPsp function which assumes there is still left
over voltage decay from previous events. If False, use Psp function
which assumes the region of the waveform before the event is at baseline.
fit_kws : dictionary
Additional key words that are fed to lmfit
exp_amp : string
function that is fed to lmfit
The parameters below are fed to the psp function. Each value in the
key:value dictionary pair must be a tuple.
In general the structure of the tuple is of the form,
(initial conditions, lower boundary, higher boundary).
The initial conditions can be either a number or a list
of numbers specifying several initial conditions. The
initial condition may also be fixed by replacing the lower
higher boundary combination with 'fixed'.
Examples:
amplitude=(10, 0, 20)
amplitude=(10, 'fixed')
amplitude=([5,10, 20], 0, 20)
amplitude=([5,10, 20], 'fixed')
xoffset : scalar
Horizontal shift between begin (positive shifts to the right)
yoffset : scalar
Vertical offset
rise_time : scalar
Time from beginning of psp until peak
decay_tau : scalar
Decay time constant
amp : scalar
The peak value of the psp
rise_power : scalar
Exponent for the rising phase; larger values result in a slower activation
amp_ratio : scalar
if *stacked* this is used to set up the ratio between the
residual decay amplitude and the height of the PSP.
Returns
-------
fit: lmfit.model.ModelResult
Best fit
"""
# extracting these for ease of use
t=response.time_values
y=response.data
dt = response.dt
# set initial conditions depending on whether in voltage or current clamp
# note that sign of these will automatically be set later on based on the
# the *sign* input
if mode == 'ic':
amp_init = .2e-3
amp_max = 100e-3
rise_time_init = 5e-3
decay_tau_init = 50e-3
elif mode == 'vc':
amp_init = 20e-12
amp_max = 500e-12
rise_time_init = 1e-3
decay_tau_init = 4e-3
else:
raise ValueError('mode must be "ic" or "vc"')
# Set up amplitude initial values and boundaries depending on whether *sign* are positive or negative
if sign == '-':
amps = (-amp_init, -amp_max, 0)
elif sign == '+':
amps = (amp_init, 0, amp_max)
elif sign =='any':
warnings.warn("You are not specifying the predicted sign of your psp. This may slow down or mess up fitting")
amps = (0, -amp_max, amp_max)
else:
raise ValueError('sign must be "+", "-", or "any"')
# initial condition, lower boundry, upper boundry
base_params = {
'xoffset': (14e-3, -float('inf'), float('inf')),
'yoffset': (0, -float('inf'), float('inf')),
'rise_time': (rise_time_init, rise_time_init/rise_time_mult_factor, rise_time_init*rise_time_mult_factor),
'decay_tau': (decay_tau_init, decay_tau_init/10., decay_tau_init*10.),
'rise_power': (2, 'fixed'),
'amp': amps
}
# specify fitting function and set up conditions
if not isinstance(stacked, bool):
raise Exception("Stacked must be True or False")
if stacked:
psp = StackedPsp()
base_params.update({
#TODO: figure out the bounds on these
'exp_amp': 'amp * amp_ratio',
'amp_ratio': (0, -100, 100),
})
else:
psp = Psp()
# override defaults with input
for bp in base_params.keys():
if eval(bp)!='default':
base_params[bp]=eval(bp)
# set weighting that
if weight == 'default': #use default weighting
# THIS CODE IS DEPENDENT ON THE DATA BEING INPUT IN A CERTAIN WAY THAT IS NOT TESTED
weight = np.ones(len(y))*10. #set everything to ten initially
weight[int(10e-3/dt):int(12e-3/dt)] = 0. #area around stim artifact
weight[int(12e-3/dt):int(19e-3/dt)] = 30. #area around steep PSP rise
elif weight is False: #do not weight any part of the stimulus
weight = np.ones(len(y))
elif 'weight' in vars(): #works if there is a value specified in weight
if len(weight) != len(y):
raise Exception('the weight and array vectors are not the same length')
# arguement to be passed through to fitting function
fit_kws={'weights': weight}
# convert initial parameters into a list of dictionaries to be consumed by psp.fit()
param_dict_list= create_all_fit_param_combos(base_params)
# cycle though different parameters sets and chose best one
best_fit = None
best_score = None
for p in param_dict_list:
fit = psp.fit(y, x=t, params=p, fit_kws=fit_kws, method=method)
err = np.sum(fit.residual**2) # note: using this because normalized (nrmse) is not necessary to comparing fits within the same data set
if best_fit is None or err < best_score:
best_fit = fit
best_score = err
fit = best_fit
# nrmse = fit.nrmse()
if 'baseline_std' in response.meta:
fit.snr = abs(fit.best_values['amp']) / response.meta['baseline_std']
fit.err = fit.nrmse() / response.meta['baseline_std']
return fit
def fit_psp(
response,
mode='ic',
sign='any', #Note this will not be used if *amp* input is specified
method='leastsq',
fit_kws=None,
stacked=True,
rise_time_mult_factor=10., #Note this will not be used if *rise_time* input is specified
weight='default',
amp_ratio='default',
# the following are parameters that can be fit
amp='default',
decay_tau='default',
rise_power='default',
rise_time='default',
exp_amp='default',
xoffset='default',
yoffset='default',
):
"""Fit psp. function to the equation
This function make assumptions about where the cross talk happens as traces
have been aligned to the pulses and response.t0 has been set to zero
Parameters
----------
response : neuroanalysis.data.Trace class
Contains data on trace waveform.
mode : string
either 'ic' for current clamp or 'vc' for voltage clamp
sign : string
Specifies the sign of the PSP deflection. Must be '+', '-', or any. If *amp*
is specified, value will be irrelevant.
method : string
Method lmfit uses for optimization
rise_time_mult_factor: float
Parameter that goes into the default calculation rise time.
Note that if an input for *rise_time* is provided this input
will be irrelevant.
stacked : True or False
If true, use the StackedPsp function which assumes there is still left
over voltage decay from previous events. If False, use Psp function
which assumes the region of the waveform before the event is at baseline.
fit_kws : dictionary
Additional key words that are fed to lmfit
exp_amp : string
function that is fed to lmfit
The parameters below are fed to the psp function. Each value in the
key:value dictionary pair must be a tuple.
In general the structure of the tuple is of the form,
(initial conditions, lower boundary, higher boundary).
The initial conditions can be either a number or a list
of numbers specifying several initial conditions. The
initial condition may also be fixed by replacing the lower
higher boundary combination with 'fixed'.
Examples:
amplitude=(10, 0, 20)
amplitude=(10, 'fixed')
amplitude=([5,10, 20], 0, 20)
amplitude=([5,10, 20], 'fixed')
xoffset : scalar
Horizontal shift between begin (positive shifts to the right)
yoffset : scalar
Vertical offset
rise_time : scalar
Time from beginning of psp until peak
decay_tau : scalar
Decay time constant
amp : scalar
The peak value of the psp
rise_power : scalar
Exponent for the rising phase; larger values result in a slower activation
amp_ratio : scalar
if *stacked* this is used to set up the ratio between the
residual decay amplitude and the height of the PSP.
Returns
-------
fit: lmfit.model.ModelResult
Best fit
"""
# extracting these for ease of use
t = response.time_values
y = response.data
dt = response.dt
# set initial conditions depending on whether in voltage or current clamp
# note that sign of these will automatically be set later on based on the
# the *sign* input
if mode == 'ic':
amp_init = .2e-3
amp_max = 100e-3
rise_time_init = 5e-3
decay_tau_init = 50e-3
elif mode == 'vc':
amp_init = 20e-12
amp_max = 500e-12
rise_time_init = 1e-3
decay_tau_init = 4e-3
else:
raise ValueError('mode must be "ic" or "vc"')
# Set up amplitude initial values and boundaries depending on whether *sign* are positive or negative
if sign == '-':
amps = (-amp_init, -amp_max, 0)
elif sign == '+':
amps = (amp_init, 0, amp_max)
elif sign == 'any':
warnings.warn(
"You are not specifying the predicted sign of your psp. This may slow down or mess up fitting"
)
amps = (0, -amp_max, amp_max)
else:
raise ValueError('sign must be "+", "-", or "any"')
# initial condition, lower boundry, upper boundry
base_params = {
'xoffset': (14e-3, -float('inf'), float('inf')),
'yoffset': (0, -float('inf'), float('inf')),
'rise_time': (rise_time_init, rise_time_init / rise_time_mult_factor,
rise_time_init * rise_time_mult_factor),
'decay_tau':
(decay_tau_init, decay_tau_init / 10., decay_tau_init * 10.),
'rise_power': (2, 'fixed'),
'amp':
amps
}
# specify fitting function and set up conditions
if not isinstance(stacked, bool):
raise Exception("Stacked must be True or False")
if stacked:
psp = StackedPsp()
base_params.update({
#TODO: figure out the bounds on these
'exp_amp': 'amp * amp_ratio',
'amp_ratio': (0, -100, 100),
})
else:
psp = Psp()
# override defaults with input
for bp in base_params.keys():
if eval(bp) != 'default':
base_params[bp] = eval(bp)
# set weighting that
if weight == 'default': #use default weighting
# THIS CODE IS DEPENDENT ON THE DATA BEING INPUT IN A CERTAIN WAY THAT IS NOT TESTED
weight = np.ones(len(y)) * 10. #set everything to ten initially
weight[int(10e-3 / dt):int(12e-3 /
dt)] = 0. #area around stim artifact
weight[int(12e-3 / dt):int(19e-3 /
dt)] = 30. #area around steep PSP rise
elif weight is False: #do not weight any part of the stimulus
weight = np.ones(len(y))
elif 'weight' in vars(): #works if there is a value specified in weight
if len(weight) != len(y):
raise Exception(
'the weight and array vectors are not the same length')
# arguement to be passed through to fitting function
fit_kws = {'weights': weight}
# convert initial parameters into a list of dictionaries to be consumed by psp.fit()
param_dict_list = create_all_fit_param_combos(base_params)
# cycle though different parameters sets and chose best one
best_fit = None
best_score = None
for p in param_dict_list:
fit = psp.fit(y, x=t, params=p, fit_kws=fit_kws, method=method)
err = np.sum(
fit.residual**2
) # note: using this because normalized (nrmse) is not necessary to comparing fits within the same data set
if best_fit is None or err < best_score:
best_fit = fit
best_score = err
fit = best_fit
# nrmse = fit.nrmse()
if 'baseline_std' in response.meta:
fit.snr = abs(fit.best_values['amp']) / response.meta['baseline_std']
fit.err = fit.nrmse() / response.meta['baseline_std']
return fit
def set_data(self, data, show_spikes=False, subtract_baseline=True):
self.spike_plot.setVisible(show_spikes)
self.spike_plot.enableAutoRange(False, False)
self.data_plot.enableAutoRange(False, False)
psp = StackedPsp()
for recording in data:
pulses = sorted(list(data[recording].keys()))
for pulse_n in pulses:
rec = data[recording][pulse_n]
# spike-align pulse + offset for pulse number
spike_t = rec.StimPulse.first_spike_time
if spike_t is None:
spike_t = rec.StimPulse.onset_time + 1e-3
qc_pass = rec.PulseResponse.in_qc_pass if rec.Synapse.synapse_type == 'in' else rec.PulseResponse.ex_qc_pass
pen = (255, 255, 255, 100) if qc_pass else (200, 50, 0, 100)
t0 = rec.PulseResponse.data_start_time - spike_t
ts = TSeries(data=rec.data,
t0=t0,
sample_rate=db.default_sample_rate)
c = self.data_plot.plot(ts.time_values, ts.data, pen=pen)
# arrange plots nicely
y0 = 0 if not subtract_baseline else ts.time_slice(None,
0).median()
shift = (pulse_n * 35e-3 + (30e-3 if pulse_n > 8 else 0), -y0)
zval = 0 if qc_pass else -10
c.setPos(*shift)
c.setZValue(zval)
if show_spikes:
t0 = rec.spike_data_start_time - spike_t
spike_ts = TSeries(data=rec.spike_data,
t0=t0,
sample_rate=db.default_sample_rate)
c = self.spike_plot.plot(spike_ts.time_values,
spike_ts.data,
pen=pen)
c.setPos(*shift)
c.setZValue(zval)
# evaluate recorded fit for this response
fit_par = rec.PulseResponseFit
if fit_par.fit_amp is None:
continue
fit = psp.eval(
x=ts.time_values,
exp_amp=fit_par.fit_exp_amp,
exp_tau=fit_par.fit_decay_tau,
amp=fit_par.fit_amp,
rise_time=fit_par.fit_rise_time,
decay_tau=fit_par.fit_decay_tau,
xoffset=fit_par.fit_latency,
yoffset=fit_par.fit_yoffset,
rise_power=2,
)
pen = (0, 255, 0, 100) if qc_pass else (50, 150, 0, 100)
c = self.data_plot.plot(ts.time_values, fit, pen=pen)
c.setZValue(10)
c.setPos(*shift)
if not qc_pass:
print(
"qc fail: ",
rec.PulseResponse.meta.get('qc_failures',
'no qc failures recorded'))
self.spike_plot.enableAutoRange(True, True)
self.data_plot.enableAutoRange(True, True)
def _plot_pulse_response(self, rec):
pr = rec.PulseResponse
base_ts = pr.get_tseries('baseline', align_to='spike')
if base_ts is not None:
self.data_plots[1].plot(base_ts.time_values, base_ts.data)
pre_ts = pr.get_tseries('pre', align_to='spike')
# If there is no presynaptic spike time, plot spike in red and bail out
if pre_ts is None:
pre_ts = pr.get_tseries('pre', align_to='pulse')
self.spike_plots[0].plot(pre_ts.time_values,
pre_ts.data,
pen=(255, 0, 0, 100))
return
post_ts = pr.get_tseries('post', align_to='spike')
self.spike_plots[0].plot(pre_ts.time_values, pre_ts.data)
self.data_plots[0].plot(post_ts.time_values, post_ts.data)
# evaluate recorded fit for this response
fit_par = rec.PulseResponseFit
# If there is no fit, bail out here
if fit_par is None:
return
spsp = StackedPsp()
fit = spsp.eval(
x=post_ts.time_values,
exp_amp=fit_par.fit_exp_amp,
exp_tau=fit_par.fit_decay_tau,
amp=fit_par.fit_amp,
rise_time=fit_par.fit_rise_time,
decay_tau=fit_par.fit_decay_tau,
xoffset=fit_par.fit_latency,
yoffset=fit_par.fit_yoffset,
rise_power=2,
)
self.data_plots[0].plot(post_ts.time_values, fit, pen=(0, 255, 0, 100))
# plot with reconvolved amplitude
fit = spsp.eval(
x=post_ts.time_values,
exp_amp=fit_par.fit_exp_amp,
exp_tau=fit_par.fit_decay_tau,
amp=fit_par.dec_fit_reconv_amp,
rise_time=fit_par.fit_rise_time,
decay_tau=fit_par.fit_decay_tau,
xoffset=fit_par.fit_latency,
yoffset=fit_par.fit_yoffset,
rise_power=2,
)
self.data_plots[0].plot(post_ts.time_values,
fit,
pen=(200, 255, 0, 100))
# plot deconvolution
clamp_mode = pr.recording.patch_clamp_recording.clamp_mode
if clamp_mode == 'ic':
decay_tau = self.loaded_pair.synapse.psp_decay_tau
lowpass = 2000
else:
decay_tau = self.loaded_pair.synapse.psc_decay_tau
lowpass = 6000
dec = deconv_filter(post_ts,
None,
tau=decay_tau,
lowpass=lowpass,
remove_artifacts=False,
bsub=True)
self.dec_plots[0].plot(dec.time_values, dec.data)
# plot deconvolution fit
psp = Psp()
fit = psp.eval(
x=dec.time_values,
exp_tau=fit_par.dec_fit_decay_tau,
amp=fit_par.dec_fit_amp,
rise_time=fit_par.dec_fit_rise_time,
decay_tau=fit_par.dec_fit_decay_tau,
xoffset=fit_par.dec_fit_latency,
yoffset=fit_par.dec_fit_yoffset,
rise_power=1,
)
self.dec_plots[0].plot(dec.time_values, fit, pen=(0, 255, 0, 100))
