Example #1
0
    def execute_cli(self, **kwargs):
        r = []
        try:
            lldp = self.cli("show lldp neighbors")
        except self.CLISyntaxError:
            raise NotImplementedError

        for block in lldp.split("\n\n"):
            neighbors = []
            if not block:
                continue
            n = parse_kv(self.lldp_map, block)
            loca_iface = n.pop("local_interface")
            if is_mac(n["remote_chassis_id"]):
                n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_MAC
            else:
                n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_LOCAL
            if is_mac(n["remote_port"]):
                n["remote_port_subtype"] = LLDP_PORT_SUBTYPE_MAC
            else:
                n["remote_port_subtype"] = LLDP_PORT_SUBTYPE_LOCAL

            neighbors += [n]
            if neighbors:
                r += [{"local_interface": loca_iface, "neighbors": neighbors}]
        return r
Example #2
0
 def execute_cli(self):
     r = []
     v = self.cli("show lldp neighbors")
     for match in self.rx_local_port.finditer(v):
         local_interface = match.group("port")
         c = self.cli("show lldp neighbors interface %s" % local_interface)
         match1 = self.rx_remote.search(c)
         chassis_id = match1.group("chassis_id")
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
         else:
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
         port_id = match1.group("port_id")
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(port_id):
             port_id_subtype = LLDP_PORT_SUBTYPE_MAC
         else:
             port_id_subtype = LLDP_PORT_SUBTYPE_LOCAL
         neighbor = {
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_chassis_id": chassis_id,
             "remote_port_subtype": port_id_subtype,
             "remote_port": port_id,
         }
         port_descr = match1.group("port_descr").strip()
         if port_descr and "-- not advertised" not in port_descr:
             neighbor["remote_port_description"] = port_descr
         r += [{
             "local_interface": local_interface,
             "neighbors": [neighbor]
         }]
     return r
Example #3
0
 def execute(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
         # This is strange behavior, but it helps us
         v = self.blank_line.sub("", v)
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     t = parse_table(v, allow_wrap=True, allow_extend=True)
     for i in t:
         chassis_id = i[1]
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = 5
         elif is_mac(chassis_id):
             chassis_id_subtype = 4
         else:
             chassis_id_subtype = 7
         port_id = i[2]
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = 4
         elif is_mac(port_id):
             port_id_subtype = 3
         else:
             port_id_subtype = 7
         caps = 0
         for c in i[4].split(","):
             c = c.strip()
             if c:
                 caps |= {
                     "O": 1,
                     "P": 2,
                     "B": 4,
                     "W": 8,
                     "R": 16,
                     "T": 32,
                     "C": 64,
                     "S": 128
                 }[c]
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if i[3]:
             neighbor["remote_system_name"] = i[3]
         s = self.cli("show lldp neighbors ethernet %s" % i[0])
         match = self.rx_sysdescr.search(s)
         if match:
             neighbor["remote_system_description"] = match.group(
                 "descr").strip()
         match = self.rx_portdescr.search(s)
         if match:
             neighbor["remote_port_description"] = match.group(
                 "descr").strip()
         r += [{"local_interface": i[0], "neighbors": [neighbor]}]
     return r
Example #4
0
    def execute_cli(self):
        r = []
        t = parse_table(self.cli("show lldp neighbor"), allow_wrap=True)
        for i in t:
            c = self.cli("show lldp neighbor %s" % i[0])
            match = self.rx_neighbor.search(c)
            chassis_id = match.group("chassis_id")
            if is_ipv4(chassis_id) or is_ipv6(chassis_id):
                chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
            elif is_mac(chassis_id):
                chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
            else:
                chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
            port_id = match.group("port_id")
            if is_ipv4(port_id) or is_ipv6(port_id):
                port_id_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
            elif is_mac(port_id):
                port_id_subtype = LLDP_PORT_SUBTYPE_MAC
            else:
                port_id_subtype = LLDP_PORT_SUBTYPE_LOCAL
            neighbor = {
                "remote_chassis_id": chassis_id,
                "remote_chassis_id_subtype": chassis_id_subtype,
                "remote_port": port_id,
                "remote_port_subtype": port_id_subtype,
            }
            if match.group("port_descr"):
                port_descr = match.group("port_descr").strip()
                if port_descr:
                    neighbor["remote_port_description"] = port_descr
            if match.group("system_name"):
                system_name = match.group("system_name").strip()
                if system_name:
                    neighbor["remote_system_name"] = system_name
            if match.group("system_descr"):
                system_descr = match.group("system_descr").strip()
                if system_descr:
                    neighbor["remote_system_description"] = system_descr
            caps = 0
            match = self.rx_caps.search(c)
            if match:
                caps = lldp_caps_to_bits(
                    match.group("caps").strip().split(","),
                    {
                        "other": LLDP_CAP_OTHER,
                        "repeater": LLDP_CAP_REPEATER,
                        "bridge": LLDP_CAP_BRIDGE,
                        "access point": LLDP_CAP_WLAN_ACCESS_POINT,
                        "router": LLDP_CAP_ROUTER,
                        "telephone": LLDP_CAP_TELEPHONE,
                        "cable device": LLDP_CAP_DOCSIS_CABLE_DEVICE,
                        "station only": LLDP_CAP_STATION_ONLY,
                    },
                )
            neighbor["remote_capabilities"] = caps

            r += [{"local_interface": i[0], "neighbors": [neighbor]}]
        return r
Example #5
0
 def execute_l(self, res):
     r = []
     for line in res.splitlines():
         match = self.rx_search.search(line)
         if not match:
             continue
         iface = self.cli("show lldp neighbors interface %s" %
                          match.group("iface"))
         iface_match = self.rx_port2.search(iface)
         chassis_id = iface_match.group("device_id")
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = 5
         elif is_mac(chassis_id):
             chassis_id_subtype = 4
         else:
             chassis_id_subtype = 7
         port_id = iface_match.group("port_id")
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = 4
         elif is_mac(port_id):
             port_id_subtype = 3
         else:
             port_id_subtype = 7
         caps = 0
         for c in iface_match.group("capabilities").split():
             c = c.strip()
             if c:
                 caps |= self.data[c]
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if iface_match.group("system_name"):
             neighbor["remote_system_name"] = iface_match.group(
                 "system_name")
         if iface_match.group("system_description"):
             neighbor["remote_system_description"] = iface_match.group(
                 "system_description").strip()
         if iface_match.group("port_description"):
             neighbor["remote_port_description"] = iface_match.group(
                 "port_description").strip()
         r += [{
             "local_interface": match.group("iface"),
             "neighbors": [neighbor]
         }]
     return r
Example #6
0
 def execute(self):
     r = []
     try:
         v = self.cli("show lldp info")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     for match in self.rx_line.finditer(v):
         chassis_id = match.group("chassis_id")
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = 5
         elif is_mac(chassis_id):
             chassis_id_subtype = 4
         else:
             chassis_id_subtype = 7
         port_id = match.group("port_id")
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = 4
         elif is_mac(port_id):
             port_id_subtype = 3
         else:
             port_id_subtype = 7
         caps = 0
         # Need more examples
         if "Bridge" in match.group("caps"):
             caps += 4
         if "Router" in match.group("caps"):
             caps += 16
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if match.group("system_name"):
             neighbor["remote_system_name"] = match.group(
                 "system_name").strip()
         if match.group("system_description"):
             neighbor["remote_system_description"] = match.group(
                 "system_description").strip()
         if match.group("port_description"):
             neighbor["remote_port_description"] = match.group(
                 "port_description").strip()
         r += [{
             "local_interface": match.group("port"),
             "neighbors": [neighbor]
         }]
     return r
Example #7
0
 def execute_snmp(
     self,
     interface=None,
     enable_ifindex=False,
     enable_interface_mac=False,
     enable_admin_status=False,
     enable_oper_status=False,
 ):
     iter_tables = []
     ifindex = None
     if interface:
         ifindex = self.get_interface_ifindex(interface)
         iter_tables += [self.iter_interface_ifindex(interface, ifindex)]
     else:
         iter_tables += [
             self.iter_iftable("name", mib[self.SNMP_NAME_TABLE])
         ]
     if enable_interface_mac:
         iter_tables += [
             self.iter_iftable("mac",
                               mib[self.SNMP_MAC_TABLE],
                               ifindex=ifindex)
         ]
     if enable_admin_status:
         iter_tables += [
             self.iter_iftable(
                 "admin_status",
                 mib[self.SNMP_ADMIN_STATUS_TABLE],
                 ifindex=ifindex,
                 clean=self.clean_status,
             )
         ]
     if enable_oper_status:
         iter_tables += [
             self.iter_iftable(
                 "oper_status",
                 mib[self.SNMP_OPER_STATUS_TABLE],
                 ifindex=ifindex,
                 clean=self.clean_status,
             )
         ]
     # Collect and merge results
     data = self.merge_tables(*tuple(iter_tables))
     # Format result
     result = []
     for ifindex in sorted(data):
         v = data[ifindex]
         if "name" not in v:
             continue
         item = {"interface": v["name"]}
         if enable_ifindex and "ifindex" in v:
             item["ifindex"] = v["ifindex"]
         if enable_interface_mac and "mac" in v and is_mac(v["mac"]):
             item["mac"] = v["mac"]
         if enable_admin_status and "admin_status" in v:
             item["admin_status"] = v["admin_status"]
         if enable_oper_status and "oper_status" in v:
             item["oper_status"] = v["oper_status"]
         result += [item]
     return result
Example #8
0
 def execute_cli(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     for match in self.rx_line.finditer(v):
         chassis_id = match.group("chassis_id")
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
         else:
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
         port_id = match.group("port_id")
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(port_id):
             port_id_subtype = LLDP_PORT_SUBTYPE_MAC
         else:
             port_id_subtype = LLDP_PORT_SUBTYPE_LOCAL
         caps = 0
         # Need more examples
         if "Bridge" in match.group("caps"):
             caps += LLDP_CAP_BRIDGE
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if match.group("system_name"):
             neighbor["remote_system_name"] = match.group(
                 "system_name").strip()
         if match.group("system_description"):
             neighbor["remote_system_description"] = match.group(
                 "system_description").strip()
         if match.group("port_description"):
             neighbor["remote_port_description"] = match.group(
                 "port_description").strip()
         r += [{
             "local_interface": match.group("port"),
             "neighbors": [neighbor]
         }]
     return r
Example #9
0
 def execute_n(self, res):
     r = []
     t = parse_table(res, allow_wrap=True)
     for i in t:
         chassis_id = i[1]
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = 5
         elif is_mac(chassis_id):
             chassis_id_subtype = 4
         else:
             chassis_id_subtype = 7
         port_id = i[2]
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = 4
         elif is_mac(port_id):
             port_id_subtype = 3
         else:
             port_id_subtype = 7
         caps = 0
         for c in i[4].split(","):
             c = c.strip()
             if c:
                 caps |= self.data[c]
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if i[3]:
             neighbor["remote_system_name"] = i[3]
         try:
             v = self.cli("show lldp neighbors %s" % i[0])
             match = self.rx_port.search(v)
         except self.CLISyntaxError:
             pass
         if match:
             neighbor["remote_system_description"] = match.group(
                 "system_description").strip()
             neighbor["remote_port_description"] = match.group(
                 "port_description").strip()
         r += [{"local_interface": i[0], "neighbors": [neighbor]}]
     return r
Example #10
0
 def get_neighbor(self, n):
     nn = self.get_neighbor_by_hostname(n)
     if nn:
         return nn
     if is_ipv4(n):
         return self.get_neighbor_by_ip(n)
     elif is_mac(n):
         return self.get_neighbor_by_mac(n)
     else:
         return None
Example #11
0
 def execute(self):
     r = []
     try:
         v = self.cli("show lldp-remote")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     for section in v.split("\n\n"):
         if not section.strip():
             continue
         name, cfg = self.parse_section(section)
         # Hack. We use port_id for chassis_id
         if "port-id" not in cfg:
             r += [{"local_interface": name, "neighbors": []}]
             return r
         remote_chassis_id = cfg["chassis-id"]
         remote_chassis_type = self.CHASSIS_TYPES[cfg["chassis-id-subtype"]]
         if cfg["chassis-id-subtype"] == "network-addr" and is_mac(
                 cfg["port-id"]):
             # Network address is default 192.168.0.1
             remote_chassis_id = cfg["port-id"]
             remote_chassis_type = LLDP_CHASSIS_SUBTYPE_MAC
         neighbor = {
             "remote_chassis_id": remote_chassis_id,
             "remote_chassis_id_subtype": remote_chassis_type,
             "remote_port": cfg["port-id"],
             "remote_port_subtype": self.PORT_TYPES[cfg["port-id-subtype"]],
         }
         if "port-descr" in cfg:
             neighbor["remote_port_description"] = cfg["port-descr"]
         if "sys-name" in cfg:
             neighbor["remote_system_name"] = cfg["sys-name"]
         if "sys-descr" in cfg:
             neighbor["remote_system_description"] = cfg["sys-descr"]
         found = False
         for i in r:
             if i["local_interface"] == name:
                 i["neighbors"] += [neighbor]
                 found = True
                 break
         if not found:
             r += [{"local_interface": name, "neighbors": [neighbor]}]
     return r
Example #12
0
    def execute_cli(self):
        match = self.rx_mac.search(self.scripts.get_switch())
        mac = match.group("id")
        macs = []
        try:
            v = self.cli("show fdb static", cached=True)
            macs = self.rx_line.findall(v)
            if macs:
                found = False
                for m in macs:
                    if m == mac:
                        found = True
                        break
                if not found:
                    macs += [mac]
        except self.CLISyntaxError:
            pass
        try:
            v = self.cli("show stack_information", cached=True)
            for i in parse_table(v):
                if not i[5] or not is_mac(i[5]):
                    continue
                found = False
                for m in macs:
                    if m == i[5]:
                        found = True
                        break
                if not found:
                    macs += [i[5]]
        except self.CLISyntaxError:
            pass
        if macs:
            macs.sort()
            return [{
                "first_chassis_mac": f,
                "last_chassis_mac": t
            } for f, t in self.macs_to_ranges(macs)]

        return {"first_chassis_mac": mac, "last_chassis_mac": mac}
Example #13
0
    def execute(self):
        r = []
        # Try SNMP first
        """
        # SNMP not working

        if self.has_snmp():
            try:

# lldpRemLocalPortNum
# lldpRemChassisIdSubtype lldpRemChassisId
# lldpRemPortIdSubtype lldpRemPortId
# lldpRemSysName lldpRemSysCapEnabled
                for v in self.snmp.get_tables(
                    ["1.0.8802.1.1.2.1.4.1.1.2",
                    "1.0.8802.1.1.2.1.4.1.1.4", "1.0.8802.1.1.2.1.4.1.1.5",
                    "1.0.8802.1.1.2.1.4.1.1.6", "1.0.8802.1.1.2.1.4.1.1.7",
                    "1.0.8802.1.1.2.1.4.1.1.9", "1.0.8802.1.1.2.1.4.1.1.12"
                    ], bulk=True):
                    local_interface = self.snmp.get(
                        "1.3.6.1.2.1.31.1.1.1.1." + v[1], cached=True)
                    remote_chassis_id_subtype = v[2]
                    remotechassisid = ":".join(["%02x" % ord(c) for c in v[3]])
                    remote_port_subtype = v[4]
                    if remote_port_subtype == 7:
                        remote_port_subtype = 5
                    remote_port = v[5]
                    remote_system_name = v[6]
                    remote_capabilities = v[7]

                    i = {"local_interface": local_interface, "neighbors": []}
                    n = {
                        "remote_chassis_id_subtype": remote_chassis_id_subtype,
                        "remote_chassis_id": remotechassisid,
                        "remote_port_subtype": remote_port_subtype,
                        "remote_port": remote_port,
                        "remote_capabilities": remote_capabilities,
                        }
                    if remote_system_name:
                        n["remote_system_name"] = remote_system_name
                    i["neighbors"].append(n)
                    r.append(i)
                return r

            except self.snmp.TimeOutError:
                pass
        """

        # Fallback to CLI
        try:
            lldp = self.cli("show lldp interface")
        except self.CLISyntaxError:
            raise self.NotSupportedError()
        for match in self.rx_line.finditer(lldp):
            local_interface = match.group("interface")
            remote_chassis_id = match.group("chassis_id")
            remote_port = match.group("port_id")
            remote_system_name = match.group("name")
            system_description = match.group("system_description")
            port_description = match.group("port_description")

            # Build neighbor data
            # Get capability
            cap = 0
            """
            for c in match.group("capabilities").split(","):
            if cap:
                c = c.strip()
                if c:
                    cap |= {
                        "O": 1, "r": 2, "B": 4,
                        "W": 8, "R": 16, "T": 32,
                        "C": 64, "S": 128, "D": 256,
                        "H": 512, "TP": 1024,
                    }[c]
            """
            # Get remote port subtype
            remote_port_subtype = 5
            if is_ipv4(remote_port):
                # Actually networkAddress(4)
                remote_port_subtype = 4
            elif is_mac(remote_port):
                # Actually macAddress(3)
                remote_port_subtype = 3
            elif is_int(remote_port):
                # Actually local(7)
                remote_port_subtype = 7

            i = {"local_interface": local_interface, "neighbors": []}
            n = {
                "remote_chassis_id": remote_chassis_id,
                "remote_port": remote_port,
                "remote_capabilities": cap,
                "remote_port_subtype": remote_port_subtype,
            }
            if remote_system_name and remote_system_name != "NULL":
                n["remote_system_name"] = remote_system_name
            if system_description and system_description != "NULL":
                n["remote_system_description"] = system_description
            if port_description and port_description != "NULL":
                n["remote_port_description"] = port_description

            # TODO:
            #            n["remote_chassis_id_subtype"] = 4

            i["neighbors"].append(n)
            r.append(i)
        return r
Example #14
0
 def execute_cli(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     t = parse_table(v, allow_wrap=True)
     for i in t:
         chassis_id = i[1]
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = 5
         elif is_mac(chassis_id):
             chassis_id_subtype = 4
         else:
             chassis_id_subtype = 7
         port_id = i[2]
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = 4
         elif is_mac(port_id):
             port_id_subtype = 3
         else:
             port_id_subtype = 7
         caps = 0
         for c in i[4].split(","):
             c = c.strip()
             if c and c != "not":
                 caps |= {
                     "O": 1,
                     "P": 2,
                     "B": 4,
                     "W": 8,
                     "R": 16,
                     "r": 16,
                     "T": 32,
                     "C": 64,
                     "S": 128,
                 }[c]
         """
         if "O" in i[4]:
             caps += 1
         elif "r" in i[4]:
             caps += 2
         elif "B" in i[4]:
             caps += 4
         elif "W" in i[4]:
             caps += 8
         elif "R" in i[4]:
             caps += 16
         elif "T" in i[4]:
             caps += 32
         elif "D" in i[4]:
             caps += 64
         elif "H" in i[4]:
             caps += 128
         """
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if i[3]:
             neighbor["remote_system_name"] = i[3]
         r += [{"local_interface": i[0], "neighbors": [neighbor]}]
     if not t:
         for iface in self.scripts.get_interface_status():
             c = self.cli("show lldp neighbors interface %s" %
                          iface["interface"],
                          ignore_errors=True)
             c = c.replace("\n\n", "\n")
             neighbors = []
             for match in self.rx_neighbor.finditer(c):
                 chassis_id = match.group("chassis_id")
                 if is_ipv4(chassis_id) or is_ipv6(chassis_id):
                     chassis_id_subtype = 5
                 elif is_mac(chassis_id):
                     chassis_id_subtype = 4
                 else:
                     chassis_id_subtype = 7
                 port_id = match.group("port_id")
                 if is_ipv4(port_id) or is_ipv6(port_id):
                     port_id_subtype = 4
                 elif is_mac(port_id):
                     port_id_subtype = 3
                 else:
                     port_id_subtype = 7
                 caps = 0
                 if match.group("caps").strip():
                     for c in match.group("caps").split():
                         c = c.strip()
                         if c in {"not", "advertised"}:
                             # not caps
                             break
                         if c and (c != "--"):
                             caps |= {
                                 "O": 1,
                                 "P": 2,
                                 "B": 4,
                                 "W": 8,
                                 "R": 16,
                                 "r": 16,
                                 "T": 32,
                                 "C": 64,
                                 "S": 128,
                             }[c]
                 neighbor = {
                     "remote_chassis_id": chassis_id,
                     "remote_chassis_id_subtype": chassis_id_subtype,
                     "remote_port": port_id,
                     "remote_port_subtype": port_id_subtype,
                     "remote_capabilities": caps,
                 }
                 port_descr = match.group("port_descr").strip()
                 system_name = match.group("system_name").strip()
                 system_descr = match.group("system_descr").strip()
                 if bool(port_descr):
                     neighbor["remote_port_description"] = port_descr
                 if bool(system_name):
                     neighbor["remote_system_name"] = system_name
                 if bool(system_descr):
                     neighbor["remote_system_description"] = system_descr
                 neighbors += [neighbor]
             if neighbors:
                 r += [{
                     "local_interface": iface["interface"],
                     "neighbors": neighbors
                 }]
     return r
Example #15
0
 def execute_cli(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     t = parse_table(v, allow_wrap=True)
     for i in t:
         local_if = i[0]
         v = self.cli("show lldp neighbors %s" % local_if)
         match = self.rx_neighbor.search(v)
         remote_chassis_id = match.group("remote_chassis_id")
         if is_ipv4(remote_chassis_id) or is_ipv6(remote_chassis_id):
             # Actually networkAddress(4)
             remote_chassis_id_subtype = 5
         elif is_mac(remote_chassis_id):
             # Actually macAddress(3)
             # Convert MAC to common form
             remote_chassis_id_subtype = 4
         else:
             remote_chassis_id_subtype = 7
         remote_port = match.group("remote_port")
         if is_ipv4(remote_port) or is_ipv6(remote_port):
             # Actually networkAddress(4)
             remote_port_subtype = 4
         elif is_mac(remote_port):
             # Actually macAddress(3)
             remote_port_subtype = 3
         elif is_int(remote_port):
             # Actually local(7)
             remote_port_subtype = 7
         else:
             remote_port_subtype = 5
         # Get capability
         cap = 0
         s = match.group("caps")
         for c in s.strip().split(", "):
             cap |= {
                 "Other": 1,
                 "Repeater": 2,
                 "Bridge": 4,
                 "WLAN": 8,
                 "Router": 16,
                 "Telephone": 32,
                 "Cable": 64,
                 "Station": 128,
             }[c]
         n = {
             "remote_chassis_id": remote_chassis_id,
             "remote_chassis_id_subtype": remote_chassis_id_subtype,
             "remote_port": remote_port,
             "remote_port_subtype": remote_port_subtype,
             "remote_capabilities": cap,
         }
         match = self.rx_system_name.search(v)
         if match and match.group("system_name"):
             n["remote_system_name"] = match.group("system_name")
         match = self.rx_port_descr.search(v)
         if match and match.group("port_descr"):
             n["remote_port_description"] = match.group("port_descr")
         i = {"local_interface": local_if, "neighbors": [n]}
         r += [i]
     return r
Example #16
0
    def execute_cli(self):
        r = defaultdict(list)  # local_iface -> neighbors
        try:
            lldp = self.cli("show lldp neighbors")
        except self.CLISyntaxError:
            raise self.NotSupportedError()
        for match in self.rx_lldp_nei.finditer(lldp):
            local_interface = match.group("interface")
            remote_chassis_id = match.group("chassis_id")
            remote_port = match.group("port_id")

            # Build neighbor data
            # Get capability
            cap = 4
            # Get remote port subtype
            remote_port_subtype = LLDP_PORT_SUBTYPE_NAME
            if is_ipv4(remote_port):
                # Actually networkAddress(4)
                remote_port_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
            elif is_mac(remote_port):
                # Actually macAddress(3)
                # Convert MAC to common form
                remote_port = MACAddressParameter().clean(remote_port)
                remote_port_subtype = LLDP_PORT_SUBTYPE_MAC
            elif is_int(remote_port):
                # Actually local(7)
                remote_port_subtype = LLDP_PORT_SUBTYPE_LOCAL

            n = {
                "remote_chassis_id": remote_chassis_id,
                "remote_port": remote_port,
                "remote_capabilities": cap,
                "remote_port_subtype": remote_port_subtype,
            }
            if is_ipv4(n["remote_chassis_id"]) or is_ipv6(
                    n["remote_chassis_id"]):
                n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
            elif is_mac(n["remote_chassis_id"]):
                n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_MAC
            else:
                n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_LOCAL
            try:
                c = self.cli("show lldp ports %s neighbors detailed" %
                             local_interface)
                match = self.rx_lldp_detail.search(c)
                if match:
                    port_descr = match.group("port_descr")
                    if port_descr:
                        n["remote_port_description"] = port_descr.replace(
                            '"', "").strip()
                        n["remote_port_description"] = re.sub(
                            r"\\\n\s*", "", n["remote_port_description"])
                    n["remote_system_name"] = match.group(
                        "system_name").replace('"', "").strip()
                    n["remote_system_name"] = re.sub(r"\\\n\s*", "",
                                                     n["remote_system_name"])
                    sys_descr = match.group("system_descr")
                    if sys_descr:
                        n["remote_system_description"] = sys_descr.replace(
                            '"', "").strip()
                        n["remote_system_description"] = re.sub(
                            r"\\\n\s*", "", n["remote_system_description"])
                    n["remote_port_subtype"] = self.port_types[match.group(
                        "port_id_subtype").strip()]
                    n["remote_chassis_id_subtype"] = self.chassis_types[
                        match.group("chassis_id_subtype").strip()]
            except self.CLISyntaxError:
                pass
            r[local_interface].append(n)
        return [{"local_interface": x, "neighbors": r[x]} for x in r]
Example #17
0
 def execute_cli(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     t = parse_table(v, allow_wrap=True)
     for i in t:
         chassis_id = i[1]
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
         else:
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
         port_id = i[2]
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(port_id):
             port_id_subtype = LLDP_PORT_SUBTYPE_MAC
         else:
             port_id_subtype = LLDP_PORT_SUBTYPE_LOCAL
         caps = lldp_caps_to_bits(
             i[4].split(","),
             {
                 "o": LLDP_CAP_OTHER,
                 "p": LLDP_CAP_REPEATER,
                 "b": LLDP_CAP_BRIDGE,
                 "w": LLDP_CAP_WLAN_ACCESS_POINT,
                 "r": LLDP_CAP_ROUTER,
                 "t": LLDP_CAP_TELEPHONE,
                 "c": LLDP_CAP_DOCSIS_CABLE_DEVICE,
                 "s": LLDP_CAP_STATION_ONLY,
             },
         )
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if i[3]:
             neighbor["remote_system_name"] = i[3]
         r += [{"local_interface": i[0], "neighbors": [neighbor]}]
     if not t:
         for iface in self.scripts.get_interface_status():
             c = self.cli("show lldp neighbors interface %s" %
                          iface["interface"],
                          ignore_errors=True)
             c = c.replace("\n\n", "\n")
             neighbors = []
             for match in self.rx_neighbor.finditer(c):
                 chassis_id = match.group("chassis_id")
                 if is_ipv4(chassis_id) or is_ipv6(chassis_id):
                     chassis_id_subtype = 5
                 elif is_mac(chassis_id):
                     chassis_id_subtype = 4
                 else:
                     chassis_id_subtype = 7
                 port_id = match.group("port_id")
                 if is_ipv4(port_id) or is_ipv6(port_id):
                     port_id_subtype = 4
                 elif is_mac(port_id):
                     port_id_subtype = 3
                 else:
                     port_id_subtype = 7
                 caps = 0
                 if match.group("caps").strip():
                     for c in match.group("caps").split():
                         c = c.strip()
                         if c in {"not", "advertised"}:
                             # not caps
                             break
                         if c and (c != "--"):
                             caps |= {
                                 "O": 1,
                                 "P": 2,
                                 "B": 4,
                                 "W": 8,
                                 "R": 16,
                                 "r": 16,
                                 "T": 32,
                                 "C": 64,
                                 "S": 128,
                             }[c]
                 neighbor = {
                     "remote_chassis_id": chassis_id,
                     "remote_chassis_id_subtype": chassis_id_subtype,
                     "remote_port": port_id,
                     "remote_port_subtype": port_id_subtype,
                     "remote_capabilities": caps,
                 }
                 port_descr = match.group("port_descr").strip()
                 system_name = match.group("system_name").strip()
                 system_descr = match.group("system_descr").strip()
                 if bool(port_descr):
                     neighbor["remote_port_description"] = port_descr
                 if bool(system_name):
                     neighbor["remote_system_name"] = system_name
                 if bool(system_descr):
                     neighbor["remote_system_description"] = system_descr
                 neighbors += [neighbor]
             if neighbors:
                 r += [{
                     "local_interface": iface["interface"],
                     "neighbors": neighbors
                 }]
     return r
Example #18
0
    def execute_cli(self, **kwargs):
        r = []

        # Fallback to CLI
        try:
            lldp = self.cli("show lldp interface")
        except self.CLISyntaxError:
            raise NotImplementedError
        for match in self.rx_line.finditer(lldp):
            local_interface = match.group("interface")
            remote_chassis_id = match.group("chassis_id")
            remote_port = match.group("port_id")
            remote_system_name = match.group("name")
            system_description = match.group("system_description")
            port_description = match.group("port_description")

            # Build neighbor data
            # Get capability
            cap = 0
            """
            for c in match.group("capabilities").split(","):
            if cap:
                c = c.strip()
                if c:
                    cap |= {
                        "O": 1, "r": 2, "B": 4,
                        "W": 8, "R": 16, "T": 32,
                        "C": 64, "S": 128, "D": 256,
                        "H": 512, "TP": 1024,
                    }[c]
            """
            # Get remote port subtype
            remote_port_subtype = 5
            if is_ipv4(remote_port):
                # Actually networkAddress(4)
                remote_port_subtype = 4
            elif is_mac(remote_port):
                # Actually macAddress(3)
                remote_port_subtype = 3
            elif is_int(remote_port):
                # Actually local(7)
                remote_port_subtype = 7

            i = {"local_interface": local_interface, "neighbors": []}
            n = {
                "remote_chassis_id": remote_chassis_id,
                "remote_port": remote_port,
                "remote_capabilities": cap,
                "remote_port_subtype": remote_port_subtype,
            }
            if remote_system_name and remote_system_name != "NULL":
                n["remote_system_name"] = remote_system_name
            if system_description and system_description != "NULL":
                n["remote_system_description"] = system_description
            if port_description and port_description != "NULL":
                n["remote_port_description"] = port_description

            # TODO:
            #            n["remote_chassis_id_subtype"] = 4

            i["neighbors"].append(n)
            r.append(i)
        return r
Example #19
0
 def execute_cli(self):
     r = []
     # Fallback to CLI
     lldp = self.cli("show lldp neighbors")
     for link in parse_table(
         lldp, allow_wrap=True, line_wrapper=None, row_wrapper=lambda x: x.strip()
     ):
         local_interface = link[0]
         remote_chassis_id = link[1]
         remote_port = link[2]
         remote_system_name = link[3]
         # Build neighbor data
         # Get capability
         cap = lldp_caps_to_bits(
             link[4].strip().split(","),
             {
                 "O": LLDP_CAP_OTHER,
                 "r": LLDP_CAP_REPEATER,
                 "B": LLDP_CAP_BRIDGE,
                 "W": LLDP_CAP_WLAN_ACCESS_POINT,
                 "R": LLDP_CAP_ROUTER,
                 "T": LLDP_CAP_TELEPHONE,
                 "D": LLDP_CAP_DOCSIS_CABLE_DEVICE,
                 "S": LLDP_CAP_STATION_ONLY,  # S-VLAN
                 "C": 256,  # C-VLAN
                 "H": 512,  # Host
                 "TP": 1024,  # Two Ports MAC Relay
             },
         )
         if is_ipv4(remote_chassis_id) or is_ipv6(remote_chassis_id):
             remote_chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(remote_chassis_id):
             remote_chassis_id = MACAddressParameter().clean(remote_chassis_id)
             remote_chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
         else:
             remote_chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
         # Get remote port subtype
         remote_port_subtype = LLDP_PORT_SUBTYPE_ALIAS
         if is_ipv4(remote_port):
             # Actually networkAddress(4)
             remote_port_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(remote_port):
             # Actually macAddress(3)
             # Convert MAC to common form
             remote_port = MACAddressParameter().clean(remote_port)
             remote_port_subtype = LLDP_PORT_SUBTYPE_MAC
         elif is_int(remote_port):
             # Actually local(7)
             remote_port_subtype = LLDP_PORT_SUBTYPE_LOCAL
         i = {"local_interface": local_interface, "neighbors": []}
         n = {
             "remote_chassis_id": remote_chassis_id,
             "remote_chassis_id_subtype": remote_chassis_id_subtype,
             "remote_port": remote_port,
             "remote_port_subtype": remote_port_subtype,
             "remote_capabilities": cap,
         }
         if remote_system_name:
             n["remote_system_name"] = remote_system_name
         #
         # XXX: Dirty hack for older firmware. Switch rebooted.
         #
         if remote_chassis_id_subtype != LLDP_CHASSIS_SUBTYPE_LOCAL:
             i["neighbors"] = [n]
             r += [i]
             continue
         try:
             c = self.cli("show lldp neighbors %s" % local_interface)
             match = self.rx_detail.search(c)
             if match:
                 remote_chassis_id = match.group("dev_id")
                 if is_ipv4(remote_chassis_id) or is_ipv6(remote_chassis_id):
                     remote_chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
                 elif is_mac(remote_chassis_id):
                     remote_chassis_id = MACAddressParameter().clean(remote_chassis_id)
                     remote_chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
                 else:
                     remote_chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
                 n["remote_chassis_id"] = remote_chassis_id
                 n["remote_chassis_id_subtype"] = remote_chassis_id_subtype
                 if match.group("sys_name").strip():
                     sys_name = match.group("sys_name").strip()
                     n["remote_system_name"] = sys_name
                 if match.group("sys_descr").strip():
                     sys_descr = match.group("sys_descr").strip()
                     n["remote_system_description"] = sys_descr
                 if match.group("port_descr").strip():
                     port_descr = match.group("port_descr").strip()
                     n["remote_port_description"] = port_descr
         except Exception:
             pass
         i["neighbors"] += [n]
         r += [i]
     return r
Example #20
0
    def execute_cli(self):
        r = []
        data = []
        try:
            v = self.cli("show lldp neighbors")
        except self.CLISyntaxError:
            raise self.NotSupportedError()
        v = v.replace("\n\n", "\n")
        for l in parse_table(v):
            if not l[0]:
                data[-1] = [s[0] + s[1] for s in zip(data[-1], l)]
                continue
            data += [l]

        for d in data:
            try:
                ifname = self.profile.convert_interface_name(d[0])
            except ValueError:
                continue
            v = self.cli("show lldp neighbors %s" % ifname)
            match = self.rx_neighbor.search(v)
            chassis_id = match.group("chassis_id").strip()
            if is_ipv4(chassis_id) or is_ipv6(chassis_id):
                chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
            elif is_mac(chassis_id):
                chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
            else:
                chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
            port_id = match.group("port_id").strip()
            if is_ipv4(port_id) or is_ipv6(port_id):
                port_id_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
            elif is_mac(port_id):
                port_id_subtype = LLDP_PORT_SUBTYPE_MAC
            else:
                port_id_subtype = LLDP_PORT_SUBTYPE_LOCAL
            caps = lldp_caps_to_bits(
                match.group("caps").strip().split(","),
                {
                    "other": LLDP_CAP_OTHER,
                    "repeater": LLDP_CAP_REPEATER,
                    "bridge": LLDP_CAP_BRIDGE,
                    "wlan-access-point": LLDP_CAP_WLAN_ACCESS_POINT,
                    "router": LLDP_CAP_ROUTER,
                    "telephone": LLDP_CAP_TELEPHONE,
                    "d": LLDP_CAP_DOCSIS_CABLE_DEVICE,
                    "h": LLDP_CAP_STATION_ONLY,
                },
            )
            neighbor = {
                "remote_chassis_id": chassis_id,
                "remote_chassis_id_subtype": chassis_id_subtype,
                "remote_port": port_id,
                "remote_port_subtype": port_id_subtype,
                "remote_capabilities": caps,
            }
            system_name = match.group("system_name").strip()
            if system_name:
                neighbor["remote_system_name"] = system_name
            system_descr = match.group("system_descr").strip()
            if system_descr:
                neighbor["remote_system_description"] = system_descr
            port_descr = match.group("port_descr").strip()
            if port_descr:
                neighbor["remote_port_description"] = port_descr
            r += [{"local_interface": ifname, "neighbors": [neighbor]}]

        return r
Example #21
0
def test_is_mac(raw, expected):
    assert is_mac(raw) is expected
Example #22
0
 def execute_cli(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     if v.startswith("%"):
         # % LLDP is not enabled
         return []
     v = self.rx_summary_split.split(v)[1]
     lldp_interfaces = []
     # Get LLDP interfaces with neighbors
     for line in v.splitlines():
         line = line.strip()
         if not line:
             break
         match = self.rx_s_line.match(line)
         if not match:
             continue
         lldp_interfaces += [match.group("local_if")]
     # Get LLDP neighbors
     for local_if in lldp_interfaces:
         i = {"local_interface": local_if, "neighbors": []}
         # Get neighbors details
         try:
             v = self.cli("show lldp neighbors %s detail" % local_if)
         except self.CLISyntaxError:
             # Found strange CLI syntax on Catalyst 4900
             # Allow ONLY interface name or "detail"
             # Need testing...
             raise self.NotSupportedError()
         # Get remote port
         match = self.re_search(self.rx_remote_port, v)
         remote_port = match.group("remote_if")
         remote_port_subtype = 1
         if is_ipv4(remote_port):
             # Actually networkAddress(4)
             remote_port = IPv4Parameter().clean(remote_port)
             remote_port_subtype = 4
         elif is_mac(remote_port):
             # Actually macAddress(3)
             # Convert MAC to common form
             remote_port = MACAddressParameter().clean(remote_port)
             remote_port_subtype = 3
         elif is_int(remote_port):
             # Actually local(7)
             remote_port_subtype = 7
         n = {
             "remote_port": remote_port,
             "remote_port_subtype": remote_port_subtype,
             "remote_chassis_id_subtype": 4,
         }
         match = self.rx_descr.search(v)
         if match:
             n["remote_port_description"] = match.group("descr")
         # Get chassis id
         match = self.rx_chassis_id.search(v)
         if not match:
             continue
         n["remote_chassis_id"] = match.group("id")
         # Get capabilities
         cap = 0
         match = self.rx_enabled_caps.search(v)
         if match:
             for c in match.group("caps").split(","):
                 c = c.strip()
                 if c:
                     cap |= {
                         "O": 1,
                         "P": 2,
                         "B": 4,
                         "W": 8,
                         "R": 16,
                         "T": 32,
                         "C": 64,
                         "S": 128,
                     }[c]
         n["remote_capabilities"] = cap
         # Get remote chassis id
         match = self.rx_system.search(v)
         if match:
             n["remote_system_name"] = match.group("name")
         if is_ipv4(n["remote_chassis_id"]) or is_ipv6(
                 n["remote_chassis_id"]):
             n["remote_chassis_id_subtype"] = 5
         elif is_mac(n["remote_chassis_id"]):
             pass
         else:
             n["remote_chassis_id_subtype"] = 7
         i["neighbors"] += [n]
         r += [i]
     return r
Example #23
0
    def execute(self):
        r = []
        try:
            v = self.cli("sh lldp info remote")
        except self.CLISyntaxError:
            raise self.NotSupportedError()

        v = self.rx_summary_split.split(v)[1]
        lldp_interfaces = []

        # Get lldp interfaces
        for line in v.splitlines():
            line = line.strip()
            if not line:
                break
            match = self.rx_s_line.match(line)
            if not match:
                continue
            lldp_interfaces += [match.group("local_if")]

        # Get lldp neighbors
        for local_if in lldp_interfaces:
            i = {"local_interface": local_if, "neighbors": []}

            # Get neighbor details
            try:
                v = self.cli("sh lldp info remote interface port-channel %s" %
                             local_if)
            except self.CLISyntaxError:
                raise self.NotSupportedError()

            # Get remote port
            match = self.re_search(self.rx_remote_port, v)
            remote_port = match.group("remote_if").strip()

            # match = self.re_search(self.rx_remote_port_desc, v)
            match = self.rx_remote_port_desc.search(v)
            if match:
                remote_port_desc = match.group("remote_if_desc").strip()
            else:
                remote_port_desc = ""

            match = self.rx_remote_port_subtype.search(v)
            if match:
                remote_port_subtype_str = match.group(
                    "remote_if_subtype").strip()
            else:
                remote_port_subtype_str = ""

            # Get remote port subtype from "Port ID Subtype" field
            if remote_port_subtype_str == "local-assigned":
                remote_port_subtype = 7  # Local
            else:
                remote_port_subtype = 5
                if is_ipv4(remote_port):
                    # Actually networkAddress(4)
                    remote_port_subtype = 4
                elif is_mac(remote_port):
                    # Actually macAddress(3)
                    remote_port_subtype = 3
                elif is_int(remote_port):
                    # Actually local(7)
                    remote_port_subtype = 7
                else:
                    remote_port_subtype = 128  # PORT_SUBTYPE_UNSPECIFIED
            n = {
                "remote_port": remote_port,
                "remote_port_subtype": remote_port_subtype,
                "remote_chassis_id_subtype": 4,
            }
            if remote_port_desc:
                n["remote_port_description"] = remote_port_desc

            # Get Chassis ID
            match = self.rx_chassis_id.search(v)
            if not match:
                continue
            n["remote_chassis_id"] = match.group("id")

            # Get capabilities
            cap = 0
            match = self.rx_enabled_caps.search(v)
            if match:
                for c in match.group("caps").split():
                    c = c.strip()
                    if c:
                        cap |= {
                            "other": 1,
                            "repeater": 2,
                            "bridge": 4,
                            "wlan-access-point": 8,
                            "router": 16,
                            "telephone": 32,
                            "docsis-cable-device": 64,
                            "station-only": 128,
                        }[c.lower()]
            n["remote_capabilities"] = cap

            # Get system name
            match = self.rx_system.search(v)
            if match:
                n["remote_system_name"] = match.group("name")
            match = self.rx_system_desc.search(v)
            if match:
                n["remote_system_description"] = match.group("desc")
            i["neighbors"] += [n]
            r += [i]
        return r
Example #24
0
 def execute_snmp(self, interface=None, last_ifname=None):
     last_ifname = self.collect_ifnames()
     # v = self.scripts.get_interface_status_ex()
     index = self.scripts.get_ifindexes()
     # index = self.get_ifindexes()
     aggregated, portchannel_members = self.get_aggregated_ifaces()
     ifaces = dict((index[i], {"interface": i}) for i in index)
     # Apply ifAdminStatus
     self.apply_table(ifaces, "IF-MIB::ifAdminStatus", "admin_status",
                      lambda x: x == 1)
     # Apply ifOperStatus
     self.apply_table(ifaces, "IF-MIB::ifOperStatus", "oper_status",
                      lambda x: x == 1)
     # Apply PhysAddress
     self.apply_table(ifaces, "IF-MIB::ifPhysAddress", "mac_address")
     self.apply_table(ifaces, "IF-MIB::ifType", "type")
     self.apply_table(ifaces, "IF-MIB::ifSpeed", "speed")
     self.apply_table(ifaces, "IF-MIB::ifMtu", "mtu")
     time.sleep(10)
     self.apply_table(ifaces, "IF-MIB::ifAlias", "description")
     ip_ifaces = self.get_ip_ifaces()
     r = []
     subs = defaultdict(list)
     """
     IF-MIB::ifPhysAddress.1 = STRING:
     IF-MIB::ifPhysAddress.2 = STRING: 0:21:5e:40:c2:50
     IF-MIB::ifPhysAddress.3 = STRING: 0:21:5e:40:c2:52
     """
     for l in ifaces:
         iface = ifaces[l]
         """
         If the bug in the firmware and the number of interfaces in cli is
         different from the number of interfaces given through snmp,
         we pass the list of interfaces for reconciliation.
         def execute_snmp(self, interface=None, last_ifname= None):
             IFNAME = set(["Gi 1/0/1", "Gi 1/0/2", "Gi 1/0/3", "Gi 1/0/4", "Gi 1/0/5", "Gi 1/0/6", "Gi 1/0/7",
                           "Gi 1/0/8", "Gi 1/0/9", "Gi 1/0/10", "Gi 1/0/11", "Gi 1/0/12", "Po 1", "Po 2", "Po 3",
                           "Po 4", "Po 5", "Po 6","Po 7", "Po 8", "Po 9", "Po 10", "Po 11", "Po 12", "Po 13",
                           "Po 14", "Po 15", "Po 16"])
             if self.match_version(version__regex="4\.0\.8\.1$") and self.match_version(platform__regex="MES-2308P"):
                 return super(Script, self).execute_snmp(last_ifname=IFNAME)
         """
         if last_ifname and iface["interface"] not in last_ifname:
             continue
         i_type = self.get_interface_type(iface["type"])
         if "." in iface["interface"]:
             s = {
                 "name":
                 iface["interface"],
                 "description":
                 self.convert_description(iface.get("description", "")),
                 "type":
                 i_type,
                 "enabled_afi": ["BRIDGE"],
                 "admin_status":
                 iface["admin_status"],
                 "oper_status":
                 iface["oper_status"],
                 "snmp_ifindex":
                 l,
             }
             iface_name, num = iface["interface"].rsplit(".", 1)
             if num.isdigit():
                 vlan_ids = int(iface["interface"].rsplit(".", 1)[-1])
                 if 1 <= vlan_ids < 4095:
                     s["vlan_ids"] = vlan_ids
             if l in ip_ifaces:
                 s["ipv4_addresses"] = [IPv4(*ip_ifaces[l])]
                 s["enabled_afi"] = ["IPv4"]
             if iface["mac_address"] and is_mac(iface["mac_address"]):
                 s["mac"] = MAC(iface["mac_address"])
             subs[iface_name] += [s.copy()]
             # r[-1]["subinterfaces"] += [s]
             continue
         i = {
             "name":
             iface["interface"],
             "description":
             self.convert_description(iface.get("description", "")),
             "type":
             i_type,
             "admin_status":
             iface["admin_status"],
             "oper_status":
             iface["oper_status"],
             "snmp_ifindex":
             l,
         }
         if i["name"] in portchannel_members:
             i["aggregated_interface"], lacp = portchannel_members[
                 i["name"]]
             if lacp:
                 i["enabled_protocols"] = ["LACP"]
         if i["name"] in aggregated:
             i["type"] = "aggregated"
         if iface["mac_address"] and is_mac(iface["mac_address"]):
             i["mac"] = MAC(iface["mac_address"])
         # sub = {"subinterfaces": [i.copy()]}
         r += [i]
     for l in r:
         if l["name"] in subs:
             l["subinterfaces"] = subs[l["name"]]
         else:
             l["subinterfaces"] = [{
                 "name":
                 l["name"],
                 "description":
                 self.convert_description(l.get("description", "")),
                 "type":
                 "SVI",
                 "enabled_afi": ["BRIDGE"]
                 if l["type"] in ["physical", "aggregated"] else [],
                 "admin_status":
                 l["admin_status"],
                 "oper_status":
                 l["oper_status"],
                 "snmp_ifindex":
                 l["snmp_ifindex"],
             }]
             if l["snmp_ifindex"] in ip_ifaces:
                 l["subinterfaces"][-1]["ipv4_addresses"] = [
                     IPv4(*ip_ifaces[l["snmp_ifindex"]])
                 ]
                 l["subinterfaces"][-1]["enabled_afi"] = ["IPv4"]
     return [{"interfaces": r}]
Example #25
0
    def execute_cli(self):
        r = []
        with self.profile.switch(self):
            lldp = self.cli("show lldp neighbors")
            for link in parse_table(lldp, allow_wrap=True):
                local_interface = link[0]
                remote_chassis_id = link[1]
                remote_port = link[2]
                remote_system_name = link[3]
                # Get capability
                cap = 0
                for c in link[4].split(","):
                    c = c.strip()
                    if c:
                        cap |= self.CAPS_MAP[c]

                if is_ipv4(remote_chassis_id) or is_ipv6(remote_chassis_id):
                    remote_chassis_id_subtype = 5
                elif is_mac(remote_chassis_id):
                    remote_chassis_id = MACAddressParameter().clean(
                        remote_chassis_id)
                    remote_chassis_id_subtype = 4
                else:
                    remote_chassis_id_subtype = 7

                # Get remote port subtype
                remote_port_subtype = 1
                if is_ipv4(remote_port):
                    # Actually networkAddress(4)
                    remote_port_subtype = 4
                elif is_mac(remote_port):
                    # Actually macAddress(3)
                    # Convert MAC to common form
                    remote_port = MACAddressParameter().clean(remote_port)
                    remote_port_subtype = 3
                elif is_int(remote_port):
                    # Actually local(7)
                    remote_port_subtype = 7
                i = {"local_interface": local_interface, "neighbors": []}
                n = {
                    "remote_chassis_id": remote_chassis_id,
                    "remote_chassis_id_subtype": remote_chassis_id_subtype,
                    "remote_port": remote_port,
                    "remote_port_subtype": remote_port_subtype,
                    "remote_capabilities": cap,
                }
                if remote_system_name:
                    n["remote_system_name"] = remote_system_name

                try:
                    c = self.cli("show lldp neighbors interface %s" %
                                 local_interface)
                    match = self.rx_detail.search(c)
                    if match:
                        if match.group("port_descr").strip():
                            port_descr = match.group("port_descr").strip()
                            n["remote_port_description"] = port_descr
                except Exception:
                    pass
                i["neighbors"] += [n]
                r += [i]
        return r
Example #26
0
 def execute(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     t = parse_table(v, allow_wrap=True)
     for i in t:
         chassis_id = i[1]
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = 5
         elif is_mac(chassis_id):
             chassis_id_subtype = 4
         else:
             chassis_id_subtype = 7
         port_id = i[2]
         if is_ipv4(port_id) or is_ipv6(port_id):
             port_id_subtype = 4
         elif is_mac(port_id):
             port_id_subtype = 3
         else:
             port_id_subtype = 7
         caps = 0
         for c in i[4].split(","):
             c = c.strip()
             if c:
                 caps |= {
                     "O": 1,
                     "r": 2,
                     "B": 4,
                     "W": 8,
                     "R": 16,
                     "T": 32,
                     "C": 64,
                     "S": 128
                 }[c]
         """
         if "O" in i[4]:
             caps += 1
         elif "r" in i[4]:
             caps += 2
         elif "B" in i[4]:
             caps += 4
         elif "W" in i[4]:
             caps += 8
         elif "R" in i[4]:
             caps += 16
         elif "T" in i[4]:
             caps += 32
         elif "D" in i[4]:
             caps += 64
         elif "H" in i[4]:
             caps += 128
         """
         neighbor = {
             "remote_chassis_id": chassis_id,
             "remote_chassis_id_subtype": chassis_id_subtype,
             "remote_port": port_id,
             "remote_port_subtype": port_id_subtype,
             "remote_capabilities": caps,
         }
         if i[3]:
             neighbor["remote_system_name"] = i[3]
         try:
             v = self.cli("show lldp neighbors %s" % i[0])
             match = self.rx_port.search(v)
             if match:
                 neighbor["remote_system_description"] = match.group(
                     "system_description").strip()
                 neighbor["remote_port_description"] = match.group(
                     "port_description").strip()
         except self.CLISyntaxError:
             pass
         r += [{"local_interface": i[0], "neighbors": [neighbor]}]
     return r
Example #27
0
 def clean_mac(self, mac: str):
     if is_mac(mac) and not self.is_ignored_mac(MAC(mac)):
         return mac
     return None
Example #28
0
 def execute_cli(self):
     r = []
     r_rem = []
     v = self.cli("show lldp remote")
     for match in self.rx_lldp_rem.finditer(v):
         chassis_id = match.group("ch_id")
         if is_ipv4(chassis_id) or is_ipv6(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(chassis_id):
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_MAC
         else:
             chassis_id_subtype = LLDP_CHASSIS_SUBTYPE_LOCAL
         r_rem += [
             {
                 "local_interface": match.group("port"),
                 "remote_chassis_id": chassis_id,
                 "remote_chassis_id_subtype": chassis_id_subtype,
             }
         ]
     v = self.cli("show lldp remote detail")
     # If detail command not contain ch id
     ext_ch_id = False
     lldp_iter = list(self.rx_lldp.finditer(v))
     if not lldp_iter:
         ext_ch_id = True
         lldp_iter = list(self.rx_lldp_womac.finditer(v))
         self.logger.debug("Not Find MAC in re")
     for match in lldp_iter:
         i = {"local_interface": match.group("port"), "neighbors": []}
         cap = lldp_caps_to_bits(
             match.group("sys_caps_enabled").strip().split(","),
             {
                 "n/a": 0,
                 "other": LLDP_CAP_OTHER,
                 "repeater/hub": LLDP_CAP_REPEATER,
                 "bridge/switch": LLDP_CAP_BRIDGE,
                 "router": LLDP_CAP_ROUTER,
                 "telephone": LLDP_CAP_TELEPHONE,
                 "station": LLDP_CAP_STATION_ONLY,
             },
         )
         n = {
             "remote_chassis_id_subtype": {
                 "macAddress": LLDP_CHASSIS_SUBTYPE_MAC,
                 "networkAddress": LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS,
             }[match.group("ch_type")],
             "remote_chassis_id": match.group("ch_id") if not ext_ch_id else None,
             "remote_port_subtype": {
                 "ifAlias": LLDP_PORT_SUBTYPE_ALIAS,
                 "macAddress": LLDP_PORT_SUBTYPE_MAC,
                 "ifName": LLDP_PORT_SUBTYPE_NAME,
                 "portComponent": LLDP_PORT_SUBTYPE_NAME,
                 "local": LLDP_PORT_SUBTYPE_LOCAL,
             }[match.group("port_id_subtype")],
             "remote_port": match.group("port_id"),
             "remote_capabilities": cap,
         }
         if match.group("sys_name").strip() != "N/A":
             n["remote_system_name"] = match.group("sys_name").strip()
         if match.group("sys_descr").strip() != "N/A":
             sd = match.group("sys_descr").strip()
             if "SysDesc:" in sd:
                 sd = sd.split()[-1]
             n["remote_system_description"] = re.sub("\n\s{29,30}", "", sd)
         if match.group("port_descr").strip() != "N/A":
             n["remote_port_description"] = re.sub(
                 "\n\s{29,30}", "", match.group("port_descr").strip()
             )
             match.group("port_descr")
         if n["remote_chassis_id"] is None:
             for j in r_rem:
                 if i["local_interface"] == j["local_interface"]:
                     n["remote_chassis_id"] = j["remote_chassis_id"]
                     n["remote_chassis_id_subtype"] = j["remote_chassis_id_subtype"]
                     break
         i["neighbors"] += [n]
         r += [i]
     return r
Example #29
0
 def execute_cli(self):
     r = []
     try:
         v = self.cli("show lldp neighbors")
     except self.CLISyntaxError:
         raise self.NotSupportedError()
     if v.startswith("%"):
         # % LLDP is not enabled
         return []
     v = self.rx_summary_split.split(v)[1]
     lldp_interfaces = []
     # Get LLDP interfaces with neighbors
     for line in v.splitlines():
         line = line.strip()
         if not line:
             break
         match = self.rx_s_line.match(line)
         if not match:
             continue
         lldp_interfaces += [match.group("local_if")]
     # Get LLDP neighbors
     for local_if in lldp_interfaces:
         i = {"local_interface": local_if, "neighbors": []}
         # Get neighbors details
         try:
             v = self.cli("show lldp neighbors %s detail" % local_if)
         except self.CLISyntaxError:
             # Found strange CLI syntax on Catalyst 4900
             # Allow ONLY interface name or "detail"
             # Need testing...
             raise self.NotSupportedError()
         # Get remote port
         match = self.re_search(self.rx_remote_port, v)
         remote_port = match.group("remote_if")
         remote_port_subtype = LLDP_PORT_SUBTYPE_ALIAS
         if is_ipv4(remote_port):
             remote_port = IPv4Parameter().clean(remote_port)
             remote_port_subtype = LLDP_PORT_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(remote_port):
             # Convert MAC to common form
             remote_port = MACAddressParameter().clean(remote_port)
             remote_port_subtype = LLDP_PORT_SUBTYPE_MAC
         elif is_int(remote_port):
             remote_port_subtype = LLDP_PORT_SUBTYPE_LOCAL
         n = {
             "remote_port": remote_port,
             "remote_port_subtype": remote_port_subtype,
             "remote_chassis_id_subtype": LLDP_CHASSIS_SUBTYPE_MAC,
         }
         match = self.rx_descr.search(v)
         if match:
             n["remote_port_description"] = match.group("descr")
         # Get chassis id
         match = self.rx_chassis_id.search(v)
         if not match:
             continue
         n["remote_chassis_id"] = match.group("id")
         # Get capabilities
         cap = 0
         match = self.rx_enabled_caps.search(v)
         if match:
             cap = lldp_caps_to_bits(
                 match.group("caps").strip().split(","),
                 {
                     "o": LLDP_CAP_OTHER,
                     "p": LLDP_CAP_REPEATER,
                     "b": LLDP_CAP_BRIDGE,
                     "w": LLDP_CAP_WLAN_ACCESS_POINT,
                     "r": LLDP_CAP_ROUTER,
                     "t": LLDP_CAP_TELEPHONE,
                     "c": LLDP_CAP_DOCSIS_CABLE_DEVICE,
                     "s": LLDP_CAP_STATION_ONLY,
                 },
             )
         n["remote_capabilities"] = cap
         # Get remote chassis id
         match = self.rx_system.search(v)
         if match:
             n["remote_system_name"] = match.group("name")
         if is_ipv4(n["remote_chassis_id"]) or is_ipv6(
                 n["remote_chassis_id"]):
             n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_NETWORK_ADDRESS
         elif is_mac(n["remote_chassis_id"]):
             pass
         else:
             n["remote_chassis_id_subtype"] = LLDP_CHASSIS_SUBTYPE_LOCAL
         i["neighbors"] += [n]
         r += [i]
     return r