def jog():
if not printer.isOperational() or printer.isPrinting():
# do not jog when a print job is running or we don't have a connection
return jsonify(SUCCESS)
(movementSpeedX, movementSpeedY, movementSpeedZ, movementSpeedE) = settings().get(["printerParameters", "movementSpeed", ["x", "y", "z", "e"]])
if "x" in request.values.keys():
# jog x
x = request.values["x"]
printer.commands(["G91", "G1 X%s F%d" % (x, movementSpeedX), "G90", "M114"])
if "y" in request.values.keys():
# jog y
y = request.values["y"]
printer.commands(["G91", "G1 Y%s F%d" % (y, movementSpeedY), "G90", "M114"])
if "z" in request.values.keys():
# jog z
z = request.values["z"]
printer.commands(["G91", "G1 Z%s F%d" % (z, movementSpeedZ), "G90", "M114"])
if "homeXY" in request.values.keys():
# home x/y
printer.command("G28 X0 Y0")
if "posX" in request.values.keys() and "posY" in request.values.keys():
# go to position
printer.commands(["G1 X%s Y%s F%d" % (request.values["posX"], request.values["posY"], movementSpeedX), "M114"])
if "homeZ" in request.values.keys():
# home z
printer.command("G28 Z0")
if "extrude" in request.values.keys():
# extrude/retract
length = request.values["extrude"]
printer.commands(["G91", "G1 E%s F%d" % (length, movementSpeedE), "G90"])
return jsonify(SUCCESS)
def printerCommand():
# TODO: document me
if not printer.isOperational():
return make_response("Printer is not operational", 409)
if not "application/json" in request.headers["Content-Type"]:
return make_response("Expected content type JSON", 400)
data = request.json
parameters = {}
if "parameters" in data.keys():
parameters = data["parameters"]
commands = []
if "command" in data.keys():
commands = [data["command"]]
elif "commands" in data.keys():
commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend)
return NO_CONTENT
def printerCommand():
# TODO: document me
if not printer.isOperational():
return make_response("Printer is not operational", 409)
if not "application/json" in request.headers["Content-Type"]:
return make_response("Expected content type JSON", 400)
data = request.json
parameters = {}
if "parameters" in data.keys(): parameters = data["parameters"]
commands = []
if "command" in data.keys(): commands = [data["command"]]
elif "commands" in data.keys(): commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend)
return NO_CONTENT
def printerCommand():
if not printer.isOperational():
return make_response("Printer is not operational", 409)
if not "application/json" in request.headers["Content-Type"]:
return make_response("Expected content type JSON", 400)
data = request.json
parameters = dict()
if "parameters" in data.keys(): parameters = data["parameters"]
if "command" in data and "commands" in data:
return make_response("'command' and 'commands' are mutually exclusive", 400)
elif "command" in data:
commands = [data["command"]]
elif "commands" in data and isinstance(data["commands"], (list, tuple)):
commands = data["commands"]
else:
return make_response("Need either single 'command' or list of 'commands'", 400)
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend)
return NO_CONTENT
def printerCommand():
if not printer.is_operational():
return make_response("Printer is not operational", 409)
if "application/json" not in request.headers["Content-Type"]:
return make_response("Expected content type JSON", 400)
try:
data = request.get_json()
except BadRequest:
return make_response("Malformed JSON body in request", 400)
if data is None:
return make_response("Malformed JSON body in request", 400)
if "command" in data and "commands" in data:
return make_response("'command' and 'commands' are mutually exclusive", 400)
elif ("command" in data or "commands" in data) and "script" in data:
return make_response(
"'command'/'commands' and 'script' are mutually exclusive", 400
)
elif not ("command" in data or "commands" in data or "script" in data):
return make_response("Need one of 'command', 'commands' or 'script'", 400)
parameters = {}
if "parameters" in data:
parameters = data["parameters"]
tags = {"source:api", "api:printer.command"}
if "command" in data or "commands" in data:
if "command" in data:
commands = [data["command"]]
else:
if not isinstance(data["commands"], (list, tuple)):
return make_response("'commands' needs to be a list", 400)
commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend, tags=tags)
elif "script" in data:
script_name = data["script"]
context = {"parameters": parameters}
if "context" in data:
context["context"] = data["context"]
try:
printer.script(script_name, context=context, tags=tags)
except UnknownScript:
return make_response("Unknown script: {script_name}".format(**locals()), 404)
return NO_CONTENT
def sendPreferenctParameter(self, inProfile):
from octoprint.server import printer
if printer.isOperational():
cmds = self.__send_all_update_epprom(inProfile)
printer.commands(cmds)
#cmd_eeprom = GcodeCommand("M500")
#printer.command(cmd_eeprom)
print("lkj sendPreferenctParameter")
''''''
return
def sendPreferenctParameter(self, inProfile):
from octoprint.server import printer
if printer.isOperational():
cmds = self.__send_all_update_epprom(inProfile)
printer.commands(cmds)
#cmd_eeprom = GcodeCommand("M500")
#printer.command(cmd_eeprom)
print("lkj sendPreferenctParameter")
''''''
return
def printerCommand():
if not printer.is_operational():
abort(409, description="Printer is not operational")
if "application/json" not in request.headers["Content-Type"]:
abort(400, description="Expected content type JSON")
data = request.get_json()
if data is None:
abort(400, description="Malformed JSON body in request")
if "command" in data and "commands" in data:
abort(400, description="'command' and 'commands' are mutually exclusive")
elif ("command" in data or "commands" in data) and "script" in data:
abort(400, description="'command'/'commands' and 'script' are mutually exclusive")
elif not ("command" in data or "commands" in data or "script" in data):
abort(400, description="Need one of 'command', 'commands' or 'script'")
parameters = {}
if "parameters" in data:
parameters = data["parameters"]
tags = {"source:api", "api:printer.command"}
if "command" in data or "commands" in data:
if "command" in data:
commands = [data["command"]]
else:
if not isinstance(data["commands"], (list, tuple)):
abort(400, description="commands is invalid")
commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend, tags=tags)
elif "script" in data:
script_name = data["script"]
context = {"parameters": parameters}
if "context" in data:
context["context"] = data["context"]
try:
printer.script(script_name, context=context, tags=tags)
except UnknownScript:
abort(404, description="Unknown script")
return NO_CONTENT
def printerCommand():
if not printer.is_operational():
return make_response("Printer is not operational", 409)
if not "application/json" in request.headers["Content-Type"]:
return make_response("Expected content type JSON", 400)
try:
data = request.json
except BadRequest:
return make_response("Malformed JSON body in request", 400)
if "command" in data and "commands" in data:
return make_response("'command' and 'commands' are mutually exclusive", 400)
elif ("command" in data or "commands" in data) and "script" in data:
return make_response("'command'/'commands' and 'script' are mutually exclusive", 400)
elif not ("command" in data or "commands" in data or "script" in data):
return make_response("Need one of 'command', 'commands' or 'script'", 400)
parameters = dict()
if "parameters" in data:
parameters = data["parameters"]
tags = {"source:api", "api:printer.command"}
if "command" in data or "commands" in data:
if "command" in data:
commands = [data["command"]]
else:
if not isinstance(data["commands"], (list, tuple)):
return make_response("'commands' needs to be a list", 400)
commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend, tags=tags)
elif "script" in data:
script_name = data["script"]
context = dict(parameters=parameters)
if "context" in data:
context["context"] = data["context"]
try:
printer.script(script_name, context=context, tags=tags)
except UnknownScript:
return make_response("Unknown script: {script_name}".format(**locals()), 404)
return NO_CONTENT
def jog():
if not printer.isOperational() or printer.isPrinting():
# do not jog when a print job is running or we don't have a connection
return jsonify(SUCCESS)
(movementSpeedX, movementSpeedY, movementSpeedZ,
movementSpeedE) = settings().get(
["printerParameters", "movementSpeed", ["x", "y", "z", "e"]])
if "x" in request.values.keys():
# jog x
x = request.values["x"]
printer.commands(["G91", "G1 X%s F%d" % (x, movementSpeedX), "G90"])
if "y" in request.values.keys():
# jog y
y = request.values["y"]
printer.commands(["G91", "G1 Y%s F%d" % (y, movementSpeedY), "G90"])
if "z" in request.values.keys():
# jog z
z = request.values["z"]
printer.commands(["G91", "G1 Z%s F%d" % (z, movementSpeedZ), "G90"])
if "homeXY" in request.values.keys():
# home x/y
printer.command("G28 X0 Y0")
if "homeZ" in request.values.keys():
# home z
printer.command("G28 Z0")
if "extrude" in request.values.keys():
# extrude/retract
length = request.values["extrude"]
printer.commands(
["G91", "G1 E%s F%d" % (length, movementSpeedE), "G90"])
return jsonify(SUCCESS)
def jog():
if not printer.isOperational() or printer.isPrinting():
# do not jog when a print job is running or we don't have a connection
return jsonify(SUCCESS)
(movementSpeedX, movementSpeedY, movementSpeedZ, movementSpeedE) = (
settings.get('movement_speed', s) for s in 'xyze')
if "x" in request.values.keys():
# jog x
x = request.values["x"]
printer.commands(["G91", "G1 X%s F%d" % (x, movementSpeedX), "G90"])
if "y" in request.values.keys():
# jog y
y = request.values["y"]
printer.commands(["G91", "G1 Y%s F%d" % (y, movementSpeedY), "G90"])
if "z" in request.values.keys():
# jog z
z = request.values["z"]
printer.commands(["G91", "G1 Z%s F%d" % (z, movementSpeedZ), "G90"])
if "homeXY" in request.values.keys():
# home x/y
printer.command("G28 X0 Y0")
if "homeZ" in request.values.keys():
# home z
printer.command("G28 Z0")
if "extrude" in request.values.keys():
# extrude/retract
length = request.values["extrude"]
printer.commands(
["G91", "G1 E%s F%d" % (length, movementSpeedE), "G90"])
return jsonify(SUCCESS)
def controlPrinterPrinthead():
if not printer.isOperational() or printer.isPrinting():
# do not jog when a print job is running or we don't have a connection
return make_response("Printer is not operational or currently printing", 403)
valid_commands = {
"jog": [],
"home": ["axes"]
}
command, data, response = util.getJsonCommandFromRequest(request, valid_commands)
if response is not None:
return response
movementSpeed = settings().get(["printerParameters", "movementSpeed", ["x", "y", "z"]], asdict=True)
valid_axes = ["x", "y", "z"]
##~~ jog command
if command == "jog":
# validate all jog instructions, make sure that the values are numbers
validated_values = {}
for axis in valid_axes:
if axis in data:
value = data[axis]
if not isinstance(value, (int, long, float)):
return make_response("Not a number for axis %s: %r" % (axis, value), 400)
validated_values[axis] = value
# execute the jog commands
for axis, value in validated_values.iteritems():
# TODO make this a generic method call (printer.jog(axis, value)) to get rid of gcode here
printer.commands(["G91", "G1 %s%.4f F%d" % (axis.upper(), value, movementSpeed[axis]), "G90"])
##~~ home command
elif command == "home":
validated_values = []
axes = data["axes"]
for axis in axes:
if not axis in valid_axes:
return make_response("Invalid axis: %s" % axis, 400)
validated_values.append(axis)
# execute the home command
# TODO make this a generic method call (printer.home(axis, ...)) to get rid of gcode here
printer.commands(["G91", "G28 %s" % " ".join(map(lambda x: "%s0" % x.upper(), validated_values)), "G90"])
return jsonify(SUCCESS)
def printerCommand():
if "application/json" in request.headers["Content-Type"]:
data = request.json
parameters = {}
if "parameters" in data.keys(): parameters = data["parameters"]
commands = []
if "command" in data.keys(): commands = [data["command"]]
elif "commands" in data.keys(): commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend)
return jsonify(SUCCESS)
def printerCommand():
if "application/json" in request.headers["Content-Type"]:
data = request.json
parameters = {}
if "parameters" in data.keys(): parameters = data["parameters"]
commands = []
if "command" in data.keys(): commands = [data["command"]]
elif "commands" in data.keys(): commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend)
return jsonify(SUCCESS)
def controlPrinterFeeder():
if not printer.isOperational() or printer.isPrinting():
# do not jog when a print job is running or we don't have a connection
return make_response("Printer is not operational or currently printing", 403)
valid_commands = {
"extrude": ["amount"]
}
command, data, response = util.getJsonCommandFromRequest(request, valid_commands)
if response is not None:
return response
extrusionSpeed = settings().get(["printerParameters", "movementSpeed", "e"])
if command == "extrude":
amount = data["amount"]
if not isinstance(amount, (int, long, float)):
return make_response("Not a number for extrusion amount: %r" % amount, 400)
# TODO make this a generic method call (printer.extruder([hotend,] amount)) to get rid of gcode here
printer.commands(["G91", "G1 E%s F%d" % (data["amount"], extrusionSpeed), "G90"])
return jsonify(SUCCESS)
def printerCommand(data=None):
# TODO: document me
if not printer.isOperational():
return make_response("Printer is not operational", 409)
if data is None:
return make_response("Expected content type JSON", 400)
parameters = {}
if "parameters" in data.keys(): parameters = data["parameters"]
commands = []
if "command" in data.keys(): commands = [data["command"]]
elif "commands" in data.keys(): commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
printer.commands(commandsToSend)
return NO_CONTENT
def printerCommand():
if not (printer.is_operational() or printer.is_locked()):
return make_response("Printer is not operational", 409)
if not "application/json" in request.headers["Content-Type"]:
return make_response("Expected content type JSON", 400)
try:
data = request.json
except BadRequest:
return make_response("Malformed JSON body in request", 400)
if "command" in data and "commands" in data:
return make_response("'command' and 'commands' are mutually exclusive", 400)
elif ("command" in data or "commands" in data) and "script" in data:
return make_response("'command'/'commands' and 'script' are mutually exclusive", 400)
elif not ("command" in data or "commands" in data or "script" in data):
return make_response("Need one of 'command', 'commands' or 'script'", 400)
#<<<<<<< HEAD
# commandsToSend = []
# for command in commands:
# commandToSend = command
# if len(parameters) > 0:
# commandToSend = command % parameters
# commandsToSend.append(commandToSend)
#
# if settings().getBoolean(["feature", "grbl"]):
# commandsToSend.append("?")
#
# printer.commands(commandsToSend)
#=======
parameters = dict()
if "parameters" in data:
parameters = data["parameters"]
if "command" in data or "commands" in data:
if "command" in data:
commands = [data["command"]]
else:
if not isinstance(data["commands"], (list, tuple)):
return make_response("'commands' needs to be a list", 400)
commands = data["commands"]
commandsToSend = []
for command in commands:
commandToSend = command
if len(parameters) > 0:
commandToSend = command % parameters
commandsToSend.append(commandToSend)
if settings().getBoolean(["feature", "grbl"]):
commandsToSend.append("?")
printer.commands(commandsToSend)
elif "script" in data:
script_name = data["script"]
context = dict(parameters=parameters)
if "context" in data:
context["context"] = data["context"]
try:
printer.script(script_name, context=context)
except UnknownScript:
return make_response("Unknown script: {script_name}".format(**locals()), 404)
#>>>>>>> upstream/maintenance
return NO_CONTENT
def jog():
if not printer.isOperational() or printer.isPrinting():
# do not jog when a print job is running or we don't have a connection
return jsonify(SUCCESS)
(movementSpeedX, movementSpeedY, movementSpeedZ, movementSpeedE) = settings().get(["printerParameters", "movementSpeed", ["x", "y", "z", "e"]])
if "x" in request.values.keys():
# jog x
x = request.values["x"]
printer.commands(["G91", "G1 X%s F%d" % (x, movementSpeedX), "G90"])
if "y" in request.values.keys():
# jog y
y = request.values["y"]
printer.commands(["G91", "G1 Y%s F%d" % (y, movementSpeedY), "G90"])
if "z" in request.values.keys():
# jog z
z = request.values["z"]
printer.commands(["G91", "G1 Z%s F%d" % (z, movementSpeedZ), "G90"])
if "homeXY" in request.values.keys():
# home x/y
printer.command("G28 X0 Y0")
if "homeZ" in request.values.keys():
# home z
printer.command("G28 Z0")
if "extrude" in request.values.keys():
# extrude/retract
length = request.values["extrude"]
printer.commands(["G91", "G1 E%s F%d" % (length, movementSpeedE), "G90"])
movementSpeed = settings().get(["printerParameters", "movementSpeed", ["x", "y", "z"]], asdict=True)
valid_axes = ["x", "y", "z"]
##~~ jog command
if command == "jog":
# validate all jog instructions, make sure that the values are numbers
validated_values = {}
for axis in valid_axes:
if axis in data:
value = data[axis]
if not isinstance(value, (int, long, float)):
return make_response("Not a number for axis %s: %r" % (axis, value), 400)
validated_values[axis] = value
# execute the jog commands
for axis, value in validated_values.iteritems():
# TODO make this a generic method call (printer.jog(axis, value)) to get rid of gcode here
printer.commands(["G91", "G1 %s%.4f F%d" % (axis.upper(), value, movementSpeed[axis]), "G90"])
##~~ home command
elif command == "home":
validated_values = []
axes = data["axes"]
for axis in axes:
if not axis in valid_axes:
return make_response("Invalid axis: %s" % axis, 400)
validated_values.append(axis)
# execute the home command
# TODO make this a generic method call (printer.home(axis, ...)) to get rid of gcode here
printer.commands(["G91", "G28 %s" % " ".join(map(lambda x: "%s0" % x.upper(), validated_values)), "G90"])
return jsonify(SUCCESS)