def move_thread(self, skeleton, x, y, shift, ctrl):
debug.subthreadTest()
self.mouselock.acquire()
try:
if self.movingnode is not None:
self.moving = 1
homogeneity = 0.0
shapeenergy = 0.0
point = self.getPoint(x,y)
# It's generally forbidden to call node.moveTo instead of
# skeleton.moveNodeTo, but since we're going to move the
# node back (see up(), below), it's ok.
if point is not None:
self.movingnode.moveTo(point)
if self.movingnode.illegal():
homogtext = "---"
shapetext = "---"
labeltext = "Illegal node position!"
else:
for element in self.nbrelements:
# Evaluating homogeneity and shape energy is
# safe, because the Skeleton's read lock was
# acquired when the mouse went down.
homogeneity += element.homogeneity(skeleton.MS)
shapeenergy += element.energyShape()
homogtext = "%-11.4g" % (homogeneity-self.homogeneity0)
shapetext = "%-11.4g" % (shapeenergy-self.shapeenergy0)
labeltext = ""
mainthread.runBlock(self.move_info,
(point, homogtext, shapetext, labeltext))
gtklogger.checkpoint("Move Node toolbox move event")
finally:
self.mouselock.release()
def updateAAInfo(self): # must be called on subthread
debug.subthreadTest()
ms = self.getCurrentMS()
if ms is not None:
activearea = ms.getObject().activearea
activearea.begin_reading()
try:
aasize = activearea.size()
mssize = ms.getObject().sizeInPixels()
if config.dimension()==2:
mpxls = mssize[0] * mssize[1]
pixstring="pixels"
elif config.dimension()==3:
mpxls = mssize[0] * mssize[1] * mssize[2]
pixstring="voxels"
apxls = mpxls - aasize
if ms.getObject().activearea.getOverride():
msg = "OVERRIDE: all %d %s are active" % (mpxls, pixstring)
else:
msg = "%d of %d %s are active" % (apxls, mpxls, pixstring)
finally:
activearea.end_reading()
else:
msg = "No Microstructure selected"
mainthread.runBlock(self.aainfo.set_text, (msg,))
gtklogger.checkpoint("active area status updated")
def rebuild_grouplist(self):
debug.subthreadTest()
mscontext = self.currentMScontext()
msg = None
if mscontext is not None:
mscontext.begin_reading()
ms = mscontext.getObject()
try:
if ms.nGroups() > 0:
grpnames = ms.groupNames()
dispnames = grpnames[:]
for i in range(len(grpnames)):
grpname = grpnames[i]
grp = ms.findGroup(grpname)
dispnames[i] += " (%d %s%s" % (len(grp), pixstring,
"s"*(len(grp)!=1))
if grp.is_meshable():
dispnames[i] += ", meshable)"
else:
dispnames[i] += ")"
else:
msg = 'No %s groups defined!'%pixstring
finally:
mscontext.end_reading()
else: # ms is None
msg = 'No Microstructure defined!'
if msg:
mainthread.runBlock(self.set_group_message, (msg,))
else:
mainthread.runBlock(self.set_group_list, (grpnames, dispnames))
self.setMeshableButton()
def __init__(self, name, gfxmgr, clone=0):
debug.subthreadTest()
self.gfxlock = lock.Lock()
mainthread.runBlock(self.preinitialize, (name, gfxmgr, clone))
self.newCanvas()
ghostgfxwindow.GhostGfxWindow.__init__(self, name, gfxmgr, clone=clone)
mainthread.runBlock(self.postinitialize, (name, gfxmgr, clone))
def setInfo_subthread(self):
debug.subthreadTest()
source = self.getSelectionSource()
if source is not None:
source.begin_reading()
try:
selection = source.getSelectionContext(
**self.toolbox.extrakwargs)
## Selection can be None because an Image must be created
## before a Microstructure, but the selection source for
## an Image is its Microstructure.
if selection is not None:
selection.begin_reading()
try:
sizetextdata = ` selection.size() `
finally:
selection.end_reading()
else:
sizetextdata = '0'
finally:
source.end_reading()
else:
sizetextdata = self.toolbox.emptyMessage()
mainthread.runBlock(self._write_text, (sizetextdata, ))
def __init__(self, name, gfxmgr, clone=0):
debug.subthreadTest()
# self.name is also assigned by GhostGfxWindow, but it's
# helpful for debugging for it to be assigned as soon as
# possible in all execution paths.
self.name = name
self.gfxlock = lock.Lock()
self.acquireGfxLock()
# This whole initialization sequence is complicated. The
# reason is that the order of operations is important -- the
# ghostgfxwindow makes function calls which need to be
# redefined in the GUI before they occur -- and there is a
# requirement that the main thread never be locked.
# Furthermore, the ghostgfxwindow has to create the menu
# before the SubWindow init gets called. It could probably be
# rationalized, but it's not urgent.
# preinitialize and postinitialize are defined in gfxwindow.py
# for 2D and gfxwindow3d.py for 3D.
mainthread.runBlock(self.preinitialize, (name, gfxmgr, clone))
# GhostGfxWindow.__init__ creates the canvas, among other things.
ghostgfxwindow.GhostGfxWindow.__init__(self, name, gfxmgr, clone=clone)
mainthread.runBlock(self.postinitialize, (name, gfxmgr, clone))
self.releaseGfxLock()
self.switchboardCallbacks.append(
switchboard.requestCallback("shutdown", self.shutdownCB))
def updateSomething(self, container):
debug.subthreadTest()
segment = container.object
skeleton = container.skeleton
container.context.begin_reading()
try:
sindex = `segment.getIndex()`
self.updateNodeList(self.nodes, list(segment.get_nodes()))
self.syncPeeker(self.nodes, "Node")
self.updateElementList(self.elem, segment.getElements())
self.syncPeeker(self.elem, "Element")
length = `segment.length()`
homogval = segment.homogeneity(skeleton.MS)
if 0.9999 < homogval < 1.0:
homog = "1 - (%e)" % (1.0-homogval)
else:
homog = `homogval`
self.updateGroup(segment)
bdynames = ','.join(
segment.boundaryNames(container.context.getObject()))
# mat = segment.material(container.context)
# if mat:
# matname = mat.name()
# else:
# matname = "<No material>"
finally:
container.context.end_reading()
mainthread.runBlock(self.updateSomething_thread,
(sindex, length, homog, bdynames,
#matname
))
def setInfo_subthread(self):
debug.subthreadTest()
source = self.getSource()
if source is not None:
source.begin_reading()
try:
selection = source.getSelectionContext(
**self.toolbox.extrakwargs)
## Selection can be None because an Image must be created
## before a Microstructure, but the selection source for
## an Image is its Microstructure.
if selection is not None:
selection.begin_reading()
try:
sizetextdata = `selection.size()`
finally:
selection.end_reading()
else:
sizetextdata = '0'
finally:
source.end_reading()
else:
sizetextdata = self.toolbox.emptyMessage()
mainthread.runBlock(self._write_text, (sizetextdata,))
gtklogger.checkpoint("selection info updated")
def kbmove_subthread(self, skelctxt, point):
debug.subthreadTest()
# In order to prohibit illegal node moves, we have to actually
# move the node, check it, and move the node back. If it's
# ok, then we call the menu item, which makes the permanent
# move.
skelctxt.begin_writing()
skeleton = skelctxt.getObject()
try:
# Compute initial energy of neighboring elements
neighbors = self.node().getElements()
homogeneity0 = 0.0
shapeenergy0 = 0.0
for element in neighbors:
if element.illegal():
continue
homogeneity0 += \
element.homogeneity(skeleton.getMicrostructure())
shapeenergy0 += element.energyShape()
# Energy after node move
self.node().moveTo(point.asTuple())
illegal = False
homogeneity = 0.0
shapeenergy = 0.0
for element in neighbors:
if not illegal:
if element.illegal():
illegal = True
else:
homogeneity += \
element.homogeneity(skeleton.getMicrostructure())
shapeenergy += element.energyShape()
self.node().moveBack()
finally:
skelctxt.end_writing()
if illegal:
if self.allow_illegal.get_active():
mainthread.runBlock(self.move_info, (point, "---", "---", ""))
self.toolbox.menu.MoveNode(node=self.node().uiIdentifier(),
destination=point)
else:
# Illegal move not allowed. Reset the x and y text so
# that the user can try again.
mainthread.runBlock(
self.move_info,
(self.node().position(),
"---", "---", ""))
else:
mainthread.runBlock(self.move_info,
(point,
"%-11.4g" % (homogeneity - homogeneity0),
"%-11.4g" % (shapeenergy - shapeenergy0),
""))
self.toolbox.menu.MoveNode(node=self.node().uiIdentifier(),
destination=point)
def __init__(self, name, gfxmgr, clone=0):
debug.subthreadTest()
self.gfxlock = lock.Lock()
mainthread.runBlock(self.preinitialize, (name, gfxmgr, clone))
self.newCanvas()
ghostgfxwindow.GhostGfxWindow.__init__(self, name, gfxmgr,
clone=clone)
mainthread.runBlock(self.postinitialize, (name, gfxmgr, clone))
def update(self, indx):
debug.subthreadTest()
skelctxt = self.getContext()
if not skelctxt:
return
skeleton = skelctxt.getObject()
if indx is not None and 0 <= indx < skeleton.nelements():
skelctxt.begin_reading()
try:
microstructure = skeleton.getMicrostructure()
# If the user typed the index, instead of clicking on
# an element, it could be invalid.
if indx < 0 or indx >= skeleton.nelements():
return
element = skeleton.getElement(indx)
assert element is not None
if config.dimension() == 3:
self.updateFaceList(self.faces,
skeleton.getElementFaces(element))
self.updateSegmentList(self.segs,
skeleton.getElementSegments(element))
self.updateNodeList(self.nodes, element.getNodes(), element)
eid = ` indx `
etype = skeleton.getElementType(element.getIndex())
if config.dimension() == 3:
earea = "%g" % element.volume()
elif config.dimension() == 2:
earea = "%g" % element.area()
if not element.illegal():
domCat = element.dominantPixel(skeleton)
hom = "%f" % element.homogeneity(skeleton)
eshape = "%f" % element.energyShape()
mat = element.material(skeleton)
egrps = ", ".join(element.groupNames())
if mat:
matname = mat.name()
else:
matname = "<No material>"
else: # illegal element
domCat = "Not Computed"
egrps = "???"
hom = "???"
eshape = "???"
matname = "???"
mainthread.runBlock(self.update_thread,
(etype, eid, earea, ` domCat
`, egrps, hom, eshape, matname))
return
finally:
skelctxt.end_reading()
# end if indx is not None
# Nothing to display -- no element or no indx.
mainthread.runBlock(self.update_thread,
("", "", "", "", "", "", "", ""))
mainthread.runBlock(self.clearObjLists)
def updateSomething(self, container):
debug.subthreadTest()
node = container.object
skeleton = container.skeleton
container.context.begin_reading()
try:
nindex = `node.getIndex()`
if config.dimension() == 2:
npos = "(%s, %s)" % (node.position().x, node.position().y)
elif config.dimension() == 3:
npos = "(%s, %s, %s)" % (node.position().x,
node.position().y, node.position().z)
if config.dimension() == 2:
if node.movable_x() and node.movable_y():
nmob = "free"
elif node.movable_x() and not node.movable_y():
nmob = "x only"
elif not node.movable_x() and node.movable_y():
nmob = "y only"
elif node.pinned():
nmob = "pinned"
else:
nmob = "fixed"
elif config.dimension() == 3:
if node.movable_x() and node.movable_y() and node.movable_z():
nmob = "free"
elif node.movable_x() and node.movable_y() and not node.movable_z():
nmob = "x and y only"
elif node.movable_x() and not node.movable_y() and node.movable_z():
nmob = "x and z only"
elif not node.movable_x() and node.movable_y() and node.movable_z():
nmob = "y and z only"
elif node.movable_x() and not node.movable_y() and not node.movable_z():
nmob = "x only"
elif not node.movable_x() and node.movable_y() and not node.movable_z():
nmob = "y only"
elif not node.movable_x() and not node.movable_y() and node.movable_z():
nmob = "z only"
elif node.pinned():
nmob = "pinned"
else:
nmob = "fixed"
self.updateElementList(self.elem, node.neighborElements())
self.syncPeeker(self.elem, "Element")
self.updateGroup(node)
bdys = []
for key, bdy in skeleton.pointboundaries.items():
if node in bdy.nodes:
bdys.append(key)
bdynames = string.join(bdys, ", ")
finally:
container.context.end_reading()
mainthread.runBlock(self.updateSomething_thread,
(nindex, npos, nmob, bdynames))
def kbmove_subthread(self, skelctxt, point):
debug.subthreadTest()
# In order to prohibit illegal node moves, we have to actually
# move the node, check it, and move the node back. If it's
# ok, then we call the menu item, which makes the permanent
# move.
skelctxt.begin_writing()
skeleton = skelctxt.getObject()
try:
# Compute initial energy of neighboring elements
neighbors = self.node().neighborElements()
homogeneity0 = 0.0
shapeenergy0 = 0.0
for element in neighbors:
if element.illegal():
continue
homogeneity0 += element.homogeneity(skeleton.MS)
shapeenergy0 += element.energyShape()
# Energy after node move
self.node().moveTo(point)
illegal = False
homogeneity = 0.0
shapeenergy = 0.0
for element in neighbors:
if not illegal:
if element.illegal():
illegal = True
else:
homogeneity += element.homogeneity(skeleton.MS)
shapeenergy += element.energyShape()
self.node().moveBack()
finally:
skelctxt.end_writing()
if illegal:
if self.allow_illegal.get_active():
mainthread.runBlock(self.move_info, (point, "---", "---", ""))
self.toolbox.menu.MoveNode(origin=self.node().position(),
destination=point)
else:
# Illegal move not allowed. Reset the x and y text so
# that the user can try again.
mainthread.runBlock(
self.move_info,
(self.node().position(),
"---", "---", ""))
else:
mainthread.runBlock(self.move_info,
(point,
"%-11.4g" % (homogeneity - homogeneity0),
"%-11.4g" % (shapeenergy - shapeenergy0),
""))
self.toolbox.menu.MoveNode(origin=self.node().position(),
destination=point)
def update(self, indx):
debug.subthreadTest()
skelctxt = self.getContext()
skeleton = skelctxt.getObject()
if indx is not None and 0 <= indx < skeleton.nnodes():
skelctxt.begin_reading()
try:
node = skeleton.getNode(indx)
assert node is not None
self.updateElementList(self.elem, node.getElements())
self.updateSegmentList(self.segs,
skeleton.getNodeSegments(node))
if config.dimension() == 3:
self.updateFaceList(self.faces,
skeleton.getNodeFaces(node))
nuid = ` indx `
npos = genericinfoGUI.posString(node.position())
movabilities = [
node.movable_x(),
node.movable_y(),
node.movable_z()
]
nmobile = sum(movabilities)
if nmobile == config.dimension():
mobstr = "free"
elif nmobile == 0:
if node.pinned():
mobstr = "pinned"
else:
mobstr = "fixed"
else: # nmobile = 1 or 2
# mobstr is something like "x only" or "x and y only"
m = [
"xyz"[i] for i in range(config.dimension())
if movabilities[i]
]
mobstr = " and ".join(m) + " only"
bdynames = [
nm for (nm, bdy) in skelctxt.pointboundaries.items()
if bdy.current_boundary().hasNode(node)
]
grpnames = node.groupNames()
mainthread.runBlock(self.update_thread,
(nuid, npos, mobstr, ", ".join(grpnames),
", ".join(bdynames)))
return
finally:
skelctxt.end_reading()
# end if indx is not None
# Nothing to display
mainthread.runBlock(self.update_thread, ("", "", "", "", ""))
mainthread.runBlock(self.clearObjLists)
def update(self, skelname, locked):
debug.subthreadTest()
# Most pages are updated when their info changes even if
# they're not currently visible. Because the Skeleton Page
# displays the homogeneity which may be slow to compute, it's
# not updated unless it's currently visible.
if not self.is_current(): # not displayed in the GUI
self.postponed_update = True
return
self.postponed_update = False
skelpath = labeltree.makePath(skelname)
if skelpath:
skelctxt = skeletoncontext.skeletonContexts[skelpath]
skel = skelctxt.getObject()
## Updating the state info is done in two stages, because
## the homogeneity index can take a while to compute. In
## the first stage, the quick stuff is computed, and the
## homogeneity index is displayed as '????'.
if not locked:
skelctxt.begin_reading()
try:
ms_name = skel.MS.name()
nNodes = len(skel.nodes)
nElements = len(skel.elements)
illegalcount = skel.getIllegalCount()
shapecounts = skel.countShapes()
lr_periodicity = skel.left_right_periodicity
tb_periodicity = skel.top_bottom_periodicity
if config.dimension() == 3:
fb_periodicity = skel.front_back_periodicity
else:
fb_periodicity = False
finally:
if not locked:
skelctxt.end_reading()
mainthread.runBlock(self.writeInfoBuffer,
(nNodes, nElements, illegalcount, shapecounts,
None, lr_periodicity, tb_periodicity,
fb_periodicity))
# Homogeneity Index stuff.
if not locked:
skelctxt.begin_writing()
try:
homogIndex = skel.getHomogeneityIndex()
finally:
if not locked:
skelctxt.end_writing()
mainthread.runBlock(self.writeInfoBuffer,
(nNodes, nElements, illegalcount, shapecounts,
homogIndex, lr_periodicity, tb_periodicity,
fb_periodicity))
else:
mainthread.runBlock(self.deleteInfoBuffer)
self.sensitize()
def newCanvas(self):
# Recreate the canvas object.
# It's important to acquire and release the lock in the
# subthread, before calling mainthread.runBlock, to avoid
# deadlocks.
debug.subthreadTest()
self.acquireGfxLock()
try:
mainthread.runBlock(self.newCanvas_thread)
finally:
self.releaseGfxLock()
def selectionSize(self):
debug.subthreadTest()
skelcontext = mainthread.runBlock(self.getCurrentSkeleton)
if skelcontext is not None:
skelcontext.begin_reading()
try:
if not skelcontext.defunct():
return self.activemode.getSelectionContext(skelcontext).size()
finally:
skelcontext.end_reading()
return 0
def updateSomething(self, container):
debug.subthreadTest()
element = container.object
skeleton = container.skeleton
container.context.begin_reading()
try:
etype = ` element.type() ` [1:-1] # strip quotes
eindex = ` element.getIndex() `
if config.dimension() == 2:
self.updateNodeListAngle(self.nodes, element)
elif config.dimension() == 3:
self.updateNodeList(self.nodes, element.nodes)
# Clear the selection in the list of nodes if there's
# nothing in the peeker.
self.syncPeeker(self.nodes, "Node")
esegs = element.getSegments(skeleton)
self.updateSegmentList(self.segs, esegs)
# Clear the selection in the list of segments if there's
# nothing in the peeker.
self.syncPeeker(self.segs, "Segment")
if config.dimension() == 2:
earea = "%s" % element.area()
elif config.dimension() == 3:
earea = "%s" % element.volume()
if not element.illegal():
domCat = element.dominantPixel(skeleton.MS)
repPix = skeleton.MS.getRepresentativePixel(domCat)
pixGrp = pixelgroup.pixelGroupNames(skeleton.MS, repPix)
pixgrps = string.join(pixGrp, ", ")
ehom = "%f" % element.homogeneity(skeleton.MS)
eshape = "%f" % element.energyShape()
mat = element.material(container.context)
if mat:
matname = mat.name()
else:
matname = "<No material>"
else: # illegal element
pixgrps = "???"
ehom = "???"
eshape = "???"
matname = "???"
self.updateGroup(element)
finally:
container.context.end_reading()
mainthread.runBlock(
self.updateSomething_thread,
(etype, eindex, earea, pixgrps, ehom, eshape, matname))
def updateSomething(self, container):
debug.subthreadTest()
element = container.object
skeleton = container.skeleton
container.context.begin_reading()
try:
etype = `element.type()`[1:-1] # strip quotes
eindex = `element.getIndex()`
if config.dimension() == 2:
self.updateNodeListAngle(self.nodes, element)
elif config.dimension() == 3:
self.updateNodeList(self.nodes, element.nodes)
# Clear the selection in the list of nodes if there's
# nothing in the peeker.
self.syncPeeker(self.nodes, "Node")
esegs = element.getSegments(skeleton)
self.updateSegmentList(self.segs, esegs)
# Clear the selection in the list of segments if there's
# nothing in the peeker.
self.syncPeeker(self.segs, "Segment")
if config.dimension() == 2:
earea = "%s" % element.area()
elif config.dimension() == 3:
earea = "%s" % element.volume()
if not element.illegal():
domCat = element.dominantPixel(skeleton.MS)
repPix = skeleton.MS.getRepresentativePixel(domCat)
pixGrp = pixelgroup.pixelGroupNames(skeleton.MS, repPix)
pixgrps = string.join(pixGrp, ", ")
ehom = "%f" % element.homogeneity(skeleton.MS)
eshape = "%f" % element.energyShape()
mat = element.material(container.context)
if mat:
matname = mat.name()
else:
matname = "<No material>"
else: # illegal element
pixgrps = "???"
ehom = "???"
eshape = "???"
matname = "???"
self.updateGroup(element)
finally:
container.context.end_reading()
mainthread.runBlock(self.updateSomething_thread,
(etype, eindex, earea, pixgrps, ehom, eshape,
matname))
def group_added(self, skelcontext, gset, name):
debug.subthreadTest()
gset = mainthread.runBlock(self.check_skel_and_gset,
(skelcontext, gset))
if gset:
skelcontext.begin_reading()
try:
names = gset.allGroups()
finally:
skelcontext.end_reading()
self.update_grouplist(names, map(gset.displayString, names))
mainthread.runBlock(self.grouplist.set_selection, (name, ))
self.sensitize_subthread()
def setMeshableButton(self):
debug.subthreadTest()
mscontext = self.currentMScontext()
if mscontext:
mscontext.begin_reading()
try:
grp = self.currentGroup()
meshable = grp is not None and grp.is_meshable()
finally:
mscontext.end_reading()
else:
meshable = False
mainthread.runBlock(self.setMeshableButton_thread, (meshable,))
def groupset_changed(self, skelcontext, gset):
debug.subthreadTest()
gset = mainthread.runBlock(self.check_skel_and_gset, (skelcontext,gset))
if gset:
skelcontext.begin_reading()
try:
names = gset.allGroups()
finally:
skelcontext.end_reading()
self.update_grouplist(names, map(gset.displayString, names))
# Must sensitize -- if the current group has become empty, the
# "clear" button's sensitivity will have changed.
self.sensitize_subthread()
switchboard.notify("redraw skeletongroups", skelcontext)
def down_subthread(self, x, y, shift, ctrl):
debug.subthreadTest()
self.mouselock.acquire()
try:
self.downed = 1
point = primitives.Point(x,y)
mainthread.runBlock(self.move_info, (point, "0", "0", ''))
skel = mainthread.runBlock(self.getSkeleton)
skelctxt = mainthread.runBlock(self.getSkeletonContext)
reserved = skel is not None and skelctxt.query_reservation()
if skel is not None and not reserved and point is not None:
self.movingnode = skel.nearestNode(point)
self.nodeChanged()
#Store this point for use by the up callback's call to MoveNode
self.downpt=point
if self.movingnode.pinned():
self.nodeChanged() # TODO: Is this required? Redundant?
self.movingnode = None
else:
# Mouse-down events are only accepted in Mouse mode,
# so the end_reading() call corresponding to this
# begin_reading() is in the "Mouse" section of the
# up() callback.
skelctxt.begin_reading()
self.nbrnodes = skel.getNeighborNodes(self.movingnode)
# self.movingnode.aperiodicNeighborNodes(skel)
self.nbrelements = self.movingnode.getElements()
self.startpt = tuple(self.movingnode.position())
# Get initial values of homogeneity and shape energy
self.homogeneity0 = 0.0
self.shapeenergy0 = 0.0
for element in self.nbrelements:
if not element.illegal():
self.homogeneity0 += element.homogeneity(
skel.getMicrostructure())
self.shapeenergy0 += element.energyShape()
# Create rubberband
points = []
for n in self.nbrnodes:
pos = n.position()
points.append(primitives.Point(pos[0],pos[1],pos[2]))
# points = [n.position() for n in self.nbrnodes]
rb = mainthread.runBlock(rubberband.SpiderRubberBand,
(points,))
mainthread.runBlock(
self.gfxwindow().setRubberband, (rb,) )
gtklogger.checkpoint("Move Node toolbox down event")
finally:
self.mouselock.release()
def group_resized(self, skelcontext, gset):
debug.subthreadTest()
gset = mainthread.runBlock(self.check_skel_and_gset, (skelcontext,gset))
if gset:
skelcontext.begin_reading()
try:
names = gset.allGroups()
finally:
skelcontext.end_reading()
self.update_grouplist(names, map(gset.displayString, names))
# Must sensitize -- if the resize was to or away from size 0,
# the clear button needs updating.
# mainthread.runBlock(self.sensitize)
self.sensitize_subthread()
def updateData(self):
debug.subthreadTest()
self.updateLock.acquire()
try:
if self.datawidget:
mainthread.runBlock(self.datawidget.destroy)
self.datawidget = None
op = mainthread.runBlock(self.outputwidget.get_value)
if (self.currentMesh is not None and self.position is not None
and op is not None):
#self.currentMesh.begin_reading()
self.currentMesh.restoreCachedData(self.time)
val = None
try:
# precompute *must* be called on a subthread
self.currentMesh.precompute_all_subproblems()
## TODO: If op is a ConcatenateOutput and just one
## of its inputs is incomputable, it would be nice
## to still display the other one. That doesn't
## happen with the current structure because
## op.incomputable is True if just one input is
## incomputable.
if (op is not None
and not op.incomputable(self.currentMesh)):
element = self.currentMesh.enclosingElement(
self.position)
# op.evaluate eventually calls mesh precompute
# for the "Energy" or "Strain" selections in
# the Data Viewer, so we can't put these in
# updateDataMain below (running it with
# mainthread.runBlock), otherwise we get a
# lock error.
if element is not None:
masterpos = element.to_master(self.position)
val = op.evaluate(self.currentMesh.getObject(),
[element], [[masterpos]])[0]
finally:
self.currentMesh.releaseCachedData()
#self.currentMesh.end_reading()
mainthread.runBlock(self.updateDataMain, (val, ))
gtklogger.checkpoint(self._name + " data updated")
finally:
self.updateLock.release()
def sensitize_subthread(self, skelcontext, current_selection):
debug.subthreadTest()
# Locks are only allowed on the subthread, but GUI updates
# must be on the main thread.
(c,u,i,r)=(0,0,0,0)
if skelcontext is not None and current_selection is not None:
current_selection.begin_reading()
if not skelcontext.defunct():
try:
c = current_selection.clearable()
u = current_selection.undoable()
i = current_selection.invertable()
r = current_selection.redoable()
finally:
current_selection.end_reading()
mainthread.runBlock(self._set_buttons, (c,u,i,r))
def quit(self):
# Waiting for threads is a bad idea if this function is
# called on the main thread, since it will block the main
# thread.
debug.subthreadTest()
if len(self.listofminithreads) > 0:
# This is done differently than it is for Worker threads.
# Worker threads are stopped by setting the stop flag in
# their Progress objects. It is assumed that all Workers
# working on long tasks are using Progress objects.
# MiniThreads are probably not using them, so this calls
# stopAll which ultimately calls pthread_cancel.
# Unfortunately, pthread_cancel doesn't seem to work
# reliably on all systems.
self.stopAll()
self.waitForAllThreads()
def drawAtTime(self, time):
debug.subthreadTest()
if time is not None:
self.setDisplayTime(time)
mainthread.runBlock(self.timeslider.set_value,
(self.displayTime, ))
# Ensure that animatable layers will be redrawn by backdating
# them, and then calling "draw". All time-dependent layers
# are animatable, and they get their time from the GfxWindow's
# displayTime.
for layer in self.layers:
layer.timeChanged()
self.draw()
mainthread.runBlock(self.sensitizeTimeButtons)
def update_thread(self, where):
debug.subthreadTest()
microstructure = self.toolbox.findMicrostructure()
if microstructure and where is not None:
mscntxt = ooflib.common.microstructure.getMSContextFromMS(
microstructure)
msname = microstructure.name()
mscntxt.begin_reading()
try:
names = pixelgroup.pixelGroupNames(microstructure, where)
finally:
mscntxt.end_reading()
grpnames = '\n'.join(names)
else:
msname = '(No microstructure)'
grpnames = ''
mainthread.runBlock(self.reallyupdate, (msname, grpnames))
def sensitize(self):
debug.subthreadTest()
context = self.currentSkeletonContext()
if context is not None:
skelselected = True
context.begin_reading()
try:
undoable = context.undoable()
redoable = context.redoable()
not_illegal = self.legalityCheck()
finally:
context.end_reading()
else:
skelselected = False
undoable = redoable = False
not_illegal = False
mainthread.runBlock(self.sensitize_thread,
(skelselected, undoable, redoable, not_illegal))
def group_added(self, skelcontext, gset, name):
debug.subthreadTest()
gset = mainthread.runBlock(self.check_skel_and_gset, (skelcontext,gset))
if gset:
skelcontext.begin_reading()
try:
names = gset.allGroups()
finally:
skelcontext.end_reading()
self.update_grouplist(names, map(gset.displayString, names))
mainthread.runBlock(self.grouplist.set_selection,
(name,) )
self.sensitize_subthread() # TODO: Remove this line. May
# require re-recording gui
# tests.
self.sensitize_subthread()
switchboard.notify("redraw skeletongroups", skelcontext)
def down_subthread(self, x, y, shift, ctrl):
debug.subthreadTest()
self.mouselock.acquire()
try:
self.downed = 1
point = self.getPoint(x,y)
mainthread.runBlock(self.move_info, (point, "0", "0", ''))
skel = mainthread.runBlock(self.getSkeleton)
skelctxt = mainthread.runBlock(self.getSkeletonContext)
reserved = skel is not None and skelctxt.query_reservation()
if skel is not None and not reserved and point is not None:
self.movingnode = skel.nearestNode(point)
self.nodeChanged()
#Store this point for use by the up callback's call to MoveNode
self.downpt=point
if self.movingnode.pinned():
self.nodeChanged()
self.movingnode = None
else:
# Mouse-down events are only accepted in Mouse mode,
# so the end_reading() call corresponding to this
# begin_reading() is in the "Mouse" section of the
# up() callback.
skelctxt.begin_reading()
self.nbrnodes = self.movingnode.aperiodicNeighborNodes(skel)
self.nbrelements = self.movingnode.neighborElements()
self.startpt = self.movingnode.position()
# Get initial values of homogeneity and shape energy
self.homogeneity0 = 0.0
self.shapeenergy0 = 0.0
for element in self.nbrelements:
if not element.illegal():
self.homogeneity0 += element.homogeneity(skel.MS)
self.shapeenergy0 += element.energyShape()
# Create rubberband
points = [n.position() for n in self.nbrnodes]
rb = mainthread.runBlock(rubberband.SpiderRubberBand,
(points,))
mainthread.runBlock(
self.gfxwindow().setRubberband, (rb,) )
gtklogger.checkpoint("Move Node toolbox down event")
finally:
self.mouselock.release()
def up_subthread(self, x, y, shift, ctrl):
debug.subthreadTest()
self.mouselock.acquire()
try:
point = self.getPoint(x,y)
if self.mode == "Mouse":
skelcontext = mainthread.runBlock(self.getSkeletonContext)
if skelcontext is not None:
skelcontext.end_reading()
if self.moving:
self.moving = 0 # Dunmovin, CA is east of the Sierra Nevada
mainthread.runBlock(self.showPosition, (point,))
# Accept/reject conditon:
# Allow_illegal is ON : unconditionally accept everything
# Allow_illegal is OFF : any node associated with
# illegal nodes before or after will not be moved.
aige = mainthread.runBlock(self.allow_illegal.get_active)
if self.movingnode.illegal() and not aige:
# Restore the state of the skeleton, and show
# the original position in the toolbox.
self.movingnode.moveTo(self.startpt)
mainthread.runBlock(self.showPosition, (self.startpt,))
mainthread.runBlock(self.statusText.set_text,
(self.illegalityText(),))
else:
# Restore the state of the skeleton so that the non-GUI
# movenode command can do the real work.
self.movingnode.moveTo(self.startpt)
try:
self.toolbox.menu.MoveNode(
origin=self.downpt,
destination=point)
finally:
rbb = mainthread.runBlock(rubberband.NoRubberBand)
mainthread.runBlock(self.gfxwindow().setRubberband,
(rbb,) )
self.nbrnodes = []
elif self.mode == "Keyboard":
self.toolbox.menu.SelectNode(position=point)
gtklogger.checkpoint("Move Node toolbox up event")
finally:
self.mouselock.release()
def solver_precompute(self, solving=False):
# Called before time-stepping. This routine precomputes
# things that can't possibly be time-dependent. Called by
# Mesh.solver_precompute(), which is called by the Solve
# menuitem callback before calling evolve().
debug.subthreadTest()
if self._precomputing:
return
if self.solveFlag and self.solver_mode is not None:
subprob = self.getObject()
subprob.precomputeLock.acquire()
self._precomputing = True
try:
if subprob.precomputeRequired:
# Check that materials are well defined, etc.
# Being badly defined isn't an error unless we're
# actually trying to solve a problem now. If
# we're just precomputing to find out if the Solve
# button should be sensitized, or something like
# that, it's ok to simply bail out without raising
# an exception.
unsolvable = self.checkSolvability()
if unsolvable:
if solving:
raise ooferror2.ErrUserError(unsolvable)
else:
return
self.precomputeMaterials(lock=False)
# Find mapping for symmetrization.
# find_equation_mapping calls
# CSubProblem::set_equation_mapping, which is a
# fairly expensive operation, since it loops over
# all nodal equations.
from ooflib.engine import conjugate # avoid import loop
conjugate.listofconjugatepairs.find_equation_mapping(self)
conjugate.check_symmetry(self.path())
subprob.precomputeRequired = False
finally:
self._precomputing = False
subprob.precomputeLock.release()
def renamepixgrp(self, group, oldname, newname):
# switchboard 'rename pixel group'
debug.subthreadTest()
self.grouplock.acquire()
try:
mscontext = self.currentMScontext()
if mscontext:
mscontext.begin_reading()
try:
ms = mscontext.getObject()
ok = group.name() in ms.groupNames()
finally:
mscontext.end_reading()
if ok:
# Ensure that the new pixel group is selected.
self.rebuild_grouplist()
mainthread.runBlock(self.grplist.set_selection, (newname,))
self.sensitize()
finally:
self.grouplock.release()
def updateData(self):
debug.subthreadTest()
self.updateLock.acquire()
try:
if self.datawidget:
mainthread.runBlock(self.datawidget.destroy)
self.datawidget = None
op = mainthread.runBlock(self.outputwidget.get_value)
if (self.currentMesh is not None and
self.position is not None and op is not None):
#self.currentMesh.begin_reading()
self.currentMesh.restoreCachedData(self.time)
val = None
try:
# precompute *must* be called on a subthread
self.currentMesh.precompute_all_subproblems()
if (op is not None and
not op.incomputable(self.currentMesh)):
element = self.currentMesh.enclosingElement(
self.position)
# op.evaluate eventually calls mesh precompute
# for the "Energy" or "Strain" selections in
# the Data Viewer, so we can't put these in
# updateDataMain below (running it with
# mainthread.runBlock), otherwise we get a
# lock error.
if element is not None:
masterpos = element.to_master(self.position)
val = op.evaluate(self.currentMesh.getObject(),
[element], [[masterpos]])[0]
finally:
self.currentMesh.releaseCachedData()
#self.currentMesh.end_reading()
mainthread.runBlock(self.updateDataMain, (val,))
gtklogger.checkpoint(self._name+" data updated")
finally:
self.updateLock.release()
def sensitize_subthread(self):
debug.subthreadTest()
source = self.getSource()
try: # The source may not have been completely built yet...
selection = source.getSelectionContext(**self.toolbox.extrakwargs)
except AttributeError:
selection = None
if source is None or selection is None:
(u,r,c,i) = (0,0,0,0)
else:
selection.begin_reading()
try:
u = selection.undoable()
r = selection.redoable()
c = selection.clearable()
i = 1
finally:
selection.end_reading()
mainthread.runBlock(self._set_button_sensitivities, (u,r,c,i))
gtklogger.checkpoint(self.gfxwindow().name + " " +
self._name + " sensitized")
def displayMSInfo(self, *args):
# *args is given because this is used as a switchboard
# callback for ('rename who', 'Image') as well as being called
# directly. This indicates either slovenliness or efficiency
# on the part of the programmer.
debug.subthreadTest()
mscontext = self.currentMScontext()
text = ""
if mscontext is not None:
mscontext.begin_reading()
try:
# ms might be None if the context was destroyed while
# we were waiting for the read lock.
ms = mscontext.getObject()
if ms is not None:
size = ms.sizeInPixels()
if config.dimension() == 2:
text += 'Pixel size: %dx%d\n' % (size.x, size.y)
size = ms.size()
text += 'Physical size: %sx%s\n' % (size.x, size.y)
elif config.dimension() == 3:
text += 'Voxel size: %dx%dx%d\n' % (
size.x, size.y, size.z)
size = ms.size()
text += 'Physical size: %sx%sx%s\n' % (
size.x, size.y, size.z)
imagenames = ms.imageNames()
if imagenames:
text += 'Images:\n'
for name in imagenames:
text += ' ' + name + '\n'
for infoplugin in self.infoplugins:
plugintext = infoplugin(mscontext)
if plugintext:
text += plugintext + '\n'
finally:
mscontext.end_reading()
mainthread.runBlock(self.infoarea.get_buffer().set_text, (text,))
def sensitize(self):
debug.subthreadTest()
ms_available = False
grp_selected = False
nonemptygrp = False
pixelsselected = False
ngrps = 0
msctxt = self.currentMScontext()
if msctxt:
msctxt.begin_reading()
try:
ms = msctxt.getObject()
if ms is not None:
ms_available = True
grp = self.currentGroup()
grp_selected = (grp is not None) and ms_available
nonemptygrp = grp_selected and len(grp) > 0
pixelsselected = ms.pixelselection.size() > 0
ngrps = ms.nGroups()
finally:
msctxt.end_reading()
mainthread.runBlock(self.sensitize_thread,
(ms_available, grp_selected, pixelsselected,
nonemptygrp, ngrps))
def displayImageInfo(self):
debug.subthreadTest()
imagecontext = self.getCurrentImage()
text = ""
if imagecontext:
imagecontext.begin_reading()
try:
if config.dimension() == 2:
image = imagecontext.getObject()
size = image.sizeInPixels()
text += 'Pixel size: %dx%d\n' % (size.x, size.y)
size = image.size()
text += 'Physical size: %sx%s\n' % (size.x, size.y)
if image.comment():
text += '\nComments:\n%s\n' % image.comment()
elif config.dimension() == 3:
image = imagecontext.getObject()
size = image.sizeInPixels()
text += 'Voxel size: %dx%dx%d\n' % (size.x, size.y, size.z)
size = image.size()
text += 'Physical size: %sx%sx%s\n' % (size.x, size.y, size.z)
finally:
imagecontext.end_reading()
mainthread.runBlock(self.displayImageInfo_thread, (text,))
def sensitize_subthread(self):
debug.subthreadTest()
ssize = self.parent.selectionSize() # requires subthread
mainthread.runBlock(self.sensitize_mainagain, (ssize,))
def findTimeDependent(self):
debug.subthreadTest()
self._timeDependent = (self.solveFlag and self.solver_mode is not None
and self.time_stepper.derivOrder() != 0)
