def test_log_during_teardown(self):
message = 'hello'
def teardown_log(test):
test.logger.info(message)
group = phase_group.PhaseGroup(main=[blank_phase],
teardown=[teardown_log])
test = openhtf.Test(group)
test.configure(default_dut_id='dut', )
executor = test_executor.TestExecutor(test.descriptor, 'uid',
start_phase, test._test_options)
executor.start()
executor.wait()
record = executor.test_state.test_record
self.assertEqual(record.outcome, Outcome.PASS)
log_records = [
log_record for log_record in record.log_records
if log_record.message == message
]
self.assertTrue(log_records)
executor.close()
def test_all_fail_subtest__not_in_subtest(self):
test_rec = yield htf.Test(
fail_phase,
phase_branches.PhaseFailureCheckpoint.all_previous(
'all_subtest', action=htf.PhaseResult.FAIL_SUBTEST),
error_phase)
self.assertTestError(test_rec)
self.assertTestOutcomeCode(test_rec, 'InvalidPhaseResultError')
self.assertPhasesOutcomeByName(test_record.PhaseOutcome.FAIL, test_rec,
'fail_phase')
self.assertEqual([
test_record.CheckpointRecord(
name='all_subtest',
action=htf.PhaseResult.FAIL_SUBTEST,
conditional=phase_branches.PreviousPhases.ALL,
subtest_name=None,
result=phase_executor.PhaseExecutionOutcome(
phase_executor.ExceptionInfo(
phase_executor.InvalidPhaseResultError, mock.ANY,
mock.ANY)),
evaluated_millis=htf_test.VALID_TIMESTAMP),
], test_rec.checkpoints)
def test_pass(self):
test_rec = yield htf.Test(
phase0,
phase_branches.DiagnosisCheckpoint(
'diag_pass',
phase_branches.DiagnosisCondition.on_all(
BranchDiagResult.NOT_SET)), phase1)
self.assertTestPass(test_rec)
self.assertPhasesOutcomeByName(test_record.PhaseOutcome.PASS, test_rec,
'phase0', 'phase1')
self.assertEqual([
test_record.CheckpointRecord(
name='diag_pass',
action=htf.PhaseResult.STOP,
conditional=phase_branches.DiagnosisCondition(
phase_branches.ConditionOn.ALL,
(BranchDiagResult.NOT_SET, )),
subtest_name=None,
result=phase_executor.PhaseExecutionOutcome(
htf.PhaseResult.CONTINUE),
evaluated_millis=htf_test.VALID_TIMESTAMP),
], test_rec.checkpoints)
def test_cancel_phase(self):
@openhtf.PhaseOptions()
def cancel_phase():
# See above cancel_phase for explanations.
_abort_executor_in_thread(executor.abort)
ev = threading.Event()
group = phase_group.PhaseGroup(main=[cancel_phase],
teardown=[lambda: ev.set()]) # pylint: disable=unnecessary-lambda
test = openhtf.Test(group)
test.configure(default_dut_id='dut', )
executor = test_executor.TestExecutor(test.descriptor, 'uid',
start_phase, test._test_options)
executor.start()
executor.wait()
record = executor.test_state.test_record
self.assertEqual(record.phases[0].name, start_phase.name)
self.assertLessEqual(record.start_time_millis, util.time_millis())
self.assertLessEqual(record.start_time_millis, record.end_time_millis)
self.assertLessEqual(record.end_time_millis, util.time_millis())
# Teardown function should be executed.
self.assertTrue(ev.wait(1))
executor.close()
def test_failure_during_start_phase_plug_init(self):
def never_gonna_run_phase():
ev2.set()
ev = threading.Event()
ev2 = threading.Event()
test = openhtf.Test(never_gonna_run_phase)
executor = core.TestExecutor(test.descriptor,
'uid',
fail_plug_phase,
'dut',
teardown_function=lambda: ev.set()) # pylint: disable=unnecessary-lambda
executor.start()
executor.wait()
record = executor.test_state.test_record
self.assertEqual(record.outcome, Outcome.ERROR)
self.assertEqual(record.outcome_details[0].code,
FailedPlugError.__name__)
self.assertEqual(record.outcome_details[0].description,
FAIL_PLUG_MESSAGE)
# Teardown function should *NOT* be executed.
self.assertFalse(ev.is_set())
self.assertFalse(ev2.is_set())
def test_ping(test, pinger, count):
"""This tests that we can ping a host.
The plug, pinger, is expected to be replaced at test creation time, so the
placeholder property was used instead of the class directly.
"""
start = time.time()
retcode = pinger.run(count)
elapsed = time.time() - start
test.measurements['total_time_%s_%s' % (pinger.host, count)] = elapsed
test.measurements.retcode = retcode
if __name__ == '__main__':
# We instantiate our OpenHTF test with the phases we want to run as args.
# We're going to use these these plugs to create all our phases using only 1
# written phase.
ping_plugs = [
PingGoogle,
PingDnsA,
PingDnsB,
]
test = htf.Test(*(test_ping.with_plugs(pinger=plug).with_args(count=2)
for plug in ping_plugs))
# Unlike hello_world.py, where we prompt for a DUT ID, here we'll just
# use an arbitrary one.
test.execute(test_start=lambda: 'MyDutId')
def main():
test = htf.Test(HelloWorldPhase)
test.configure(default_dut_id=DEFAULT_DUT_ID)
test.add_output_callbacks(
CustomOutputToJSON('./{dut_id}.hello_world.json', indent=2))
test.execute(test_start=user_input.prompt_for_test_start())
# is the recommended way to do any logging within test phases (this is also
# how to get logs to show up in the frontend).
test.logger.info('Hello World!')
# As described above, this is how measurements are set. The value that has
# been set can also be accessed, but should only be set once (this will be
# enforced in the future, for now it's best-practice).
test.measurements.hello_world_measurement = 'Hello Again!'
if __name__ == '__main__':
# We instantiate our OpenHTF test with the phases we want to run as args.
# Multiple phases would be passed as additional args, and additional
# keyword arguments may be passed as well. See other examples for more
# complex uses.
test = htf.Test(hello_world)
# In order to view the result of the test, we have to output it somewhere,
# and a local JSON file is a convenient way to do this. Custom output
# mechanisms can be implemented, but for now we'll just keep it simple.
# This will always output to the same ./hello_world.json file, formatted
# slightly for human readability.
test.add_output_callbacks(
json_factory.OutputToJSON('./{dut_id}.hello_world.json', indent=2))
# prompt_for_test_start prompts the operator for a DUT ID, a unique identifier
# for the DUT (Device Under Test). OpenHTF requires that a DUT ID is set
# each time a test is executed. It may be set programmatically, but the
# simplest way to get one is to prompt the user for it. If test_start is
# not provided, the test will start immediately and assume the DUT ID will
# be set later (OpenHTF will raise an exception when the test completes if
def testStringFromTestRecord_SuccessfullyConvertsTestFailurePhaseColored(
self):
record = self.execute_phase_or_test(openhtf.Test(PhaseWithFailure))
self.assertEqual(
text.StringFromTestRecord(record, colorize_text=True).count(_RED),
5)
def test_plug_map(self):
test = openhtf.Test(phase_one, phase_two)
self.assertIn(self.test_plug_type, test.descriptor.plug_types)
def testNotCaptured(self):
htf.conf.load(capture_source=False)
test = htf.Test(phase)
phase_descriptor = test.descriptor.phases[0]
self.assertEquals(phase_descriptor.code_info.name, '')
test.measurements.dimensions[dim] = 1 << dim
for x, y, z in zip(range(1, 5), range(21, 25), range(101, 105)):
test.measurements.lots_of_dims[x, y, z] = x + y + z
def attachments(test):
test.Attach('test_attachment', 'This is test attachment data.')
test.AttachFromFile('example_attachment.txt')
if __name__ == '__main__':
test = openhtf.Test(
hello_world,
set_measurements,
dimensions,
attachments,
# Some metadata fields, these in particular are used by mfg-inspector,
# but you can include any metadata fields.
test_name='MyTest',
test_description='OpenHTF Example Test',
test_version='1.0.0')
test.AddOutputCallbacks(
json_factory.OutputToJSON('./%(dut_id)s.%(start_time_millis)s.json',
indent=4))
#test.AddOutputCallbacks(mfg_inspector.OutputToTestRunProto(
# './%(dut_id)s.%(start_time_millis)s.pb'))
# Example of how to upload to mfg-inspector. Replace filename with your
# JSON-formatted private key downloaded from Google Developers Console
# when you created the Service Account you intend to use, or name it
# 'my_private_key.json'.
#if os.path.isfile('my_private_key.json'):
# with open('my_private_key.json', 'r') as json_file:
def get_test():
return htf.Test(hello_world, inline_phase, lots_of_measurements)
def testNotCaptured(self):
htf.conf.load(capture_source=False)
test = htf.Test(phase)
phase_descriptor = typing.cast(htf.PhaseDescriptor,
test.descriptor.phase_sequence.nodes[0])
self.assertEqual(phase_descriptor.code_info.name, '')
test.logger.info('test ATSC chip presence')
## ATSC chip test
cmd = [joker_tv_path, '-d 11 -f 150000000']
p = subprocess.Popen(cmd,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
stdin=subprocess.PIPE)
time.sleep(5)
os.system('killall joker-tv')
out, err = p.communicate()
counter = 0
for line in out.splitlines():
if line.startswith('INFO: status=11 (NOLOCK) ucblocks=255'):
counter += 1
test.logger.info('ATSC: counter %d' % counter)
if counter < 5:
test.logger.info('ATSC: counter out of range. ATSC chip error !')
raise
test.measurements.jokertv_atsc_measurement = 'Done'
if __name__ == '__main__':
conf.load(station_server_port='4444')
with station_server.StationServer() as server:
web_launcher.launch('http://localhost:4444')
while 1:
test = htf.Test(jokertv_fpga, jokertv_cam, jokertv_sat,
jokertv_ter, jokertv_dtmb, jokertv_atsc)
test.add_output_callbacks(server.publish_final_state)
test.execute(test_start=user_input.prompt_for_test_start())
time.sleep(1)
test.measurements.level_some = 8
time.sleep(1)
test.measurements.level_all = 9
time.sleep(1)
@measures(
Measurement('dimensions').WithDimensions(UOM['HERTZ']),
Measurement('lots_of_dims').WithDimensions(
UOM['HERTZ'], UOM['BYTE'], UOM['RADIAN']))
def dimensions(test):
for dim in range(5):
test.measurements.dimensions[dim] = 1 << dim
for x, y, z in zip(range(1, 5), range(21, 25), range (101, 105)):
test.measurements.lots_of_dims[x, y, z] = x + y + z
def attachments(test):
test.Attach('test_attachment', 'This is test attachment data.')
with tempfile.NamedTemporaryFile() as f:
f.write('This is a file attachment')
f.flush()
test.AttachFromFile(f.name)
if __name__ == '__main__':
test = openhtf.Test(hello_world, set_measurements, dimensions, attachments)
test.AddOutputCallback(OutputToJSON(
'./%(dut_id)s.%(start_time_millis)s', indent=4))
test.Execute(test_start=triggers.PromptForTestStart())
# total of three times: two fails followed by a success
@plugs.plug(test_plug=FailTwicePlug)
def phase_repeat(test, test_plug):
try:
test_plug.run()
except:
print "Error in phase_repeat, will retry"
return openhtf.PhaseResult.REPEAT
print "Completed phase_repeat"
# This phase demonstrates repeating a phase based upon a result returned from a
# plug. In this case the plug always returns an invalid result so we re-run
# the phase. To prevent retrying in an infinite loop, we use repeat_limit to
# limit the number of retries.
@openhtf.PhaseOptions(repeat_limit=5)
@plugs.plug(test_plug=FailAlwaysPlug)
def phase_repeat_with_limit(test, test_plug):
result = test_plug.run()
if not result:
print "Invalid result in phase_repeat_with_limit, will retry"
return openhtf.PhaseResult.REPEAT
if __name__ == '__main__':
test = openhtf.Test(phase_repeat, phase_repeat_with_limit)
test.execute(test_start=lambda: 'RepeatDutID')
def testCaptured(self):
htf.conf.load(capture_source=True)
test = htf.Test(phase)
phase_descriptor = test.descriptor.phases[0]
self.assertEqual(phase_descriptor.code_info.name, phase.__name__)
test.logger.info('This is what a dataframe looks like:\n%s', power_df)
test.measurements['average_voltage'] = power_df['V'].mean()
# We can convert the dataframe to a numpy array as well
power_array = power_df.as_matrix()
test.logger.info('This is the same data in a numpy array:\n%s',
power_array)
test.measurements['average_current'] = power_array.mean(axis=0)[2]
# Finally, let's estimate the resistance
test.measurements['resistance'] = (test.measurements['average_voltage'] /
test.measurements['average_current'])
if __name__ == '__main__':
# We instantiate our OpenHTF test with the phases we want to run as args.
test = htf.Test(hello_phase, again_phase, lots_of_measurements,
measure_seconds, inline_phase, multdim_measurements)
# In order to view the result of the test, we have to output it somewhere,
# and a local JSON file is a convenient way to do this. Custom output
# mechanisms can be implemented, but for now we'll just keep it simple.
# This will always output to the same ./measurements.json file, formatted
# slightly for human readability.
test.add_output_callbacks(
json_factory.OutputToJSON('./measurements.json', indent=2))
# Unlike hello_world.py, where we prompt for a DUT ID, here we'll just
# use an arbitrary one.
test.execute(test_start=lambda: 'MyDutId')
def test_passing_test(self): test_record = yield openhtf.Test(phase_retval(None)) self.assertTestPass(test_record)
del expected_retcode # Not used in the phase, only used by a measurement
start = time.time()
retcode = pinger.run(count)
elapsed = time.time() - start
test.measurements['total_time_%s_%s' % (pinger.host, count)] = elapsed
test.measurements.retcode = retcode
if __name__ == '__main__':
# We instantiate our OpenHTF test with the phases we want to run as args.
# We're going to use these these plugs to create all our phases using only 1
# written phase.
ping_plugs = [
PingGoogle,
PingDnsA,
PingDnsB,
]
phases = [
test_ping.with_plugs(pinger=plug).with_args(count=2,
expected_retcode=0)
for plug in ping_plugs
]
test = htf.Test(*phases)
# Unlike hello_world.py, where we prompt for a DUT ID, here we'll just
# use an arbitrary one.
test.execute(test_start=lambda: 'MyDutId')
def long_running_phase(test):
# A long running phase could be something like a hardware burn-in. This
# phase should not run if previous phases have failed, so we make sure
# checkpoint phase is run right before this phase.
for i in range(10):
test.logger.info('Still running....')
time.sleep(10)
test.logger.info('Done with long_running_phase')
if __name__ == '__main__':
# We instantiate our OpenHTF test with the phases we want to run as args.
test = htf.Test(
measurements_example.hello_phase,
measurements_example.again_phase,
failing_phase,
measurements_example.lots_of_measurements,
checkpoints.checkpoint(),
long_running_phase,
)
# In order to view the result of the test, we have to output it somewhere,
# outputting to console is an easy way to do this.
test.add_output_callbacks(console_summary.ConsoleSummary())
# The complete summary is viable in json, including the measurements
# included in measurements_example.lots_of_measurements.
test.add_output_callbacks(
json_factory.OutputToJSON('./checkpoints.json', indent=2))
# Unlike hello_world.py, where we prompt for a DUT ID, here we'll just
# use an arbitrary one.
def test_wrong_measured_value(self): test_rec = yield openhtf.Test(phase_retval(None)) self.assertMeasured(test_rec, 'test_measurement', 0xBAD)
def test_call_skips_phase_result_override(self):
phase = openhtf.PhaseOptions(
stop_on_measurement_fail=False)(partially_passing_phase)
record = self.execute_phase_or_test(openhtf.Test(phase, passing_phase))
self.assertEqual(record.outcome, test_record.Outcome.FAIL)
self.assertEqual(record.phases[-1].name, passing_phase.name)
def test_errors(self):
phase_record = yield raising_phase
self.assertPhaseError(phase_record, DummyError)
test_record = yield openhtf.Test(raising_phase)
self.assertTestError(test_record, DummyError)
def test_execute_phase_or_test_test_with_no_patched_plugs(self):
test_record = self.execute_phase_or_test(
openhtf.Test(test_phase_with_shameless_plug))
self.assertTestPass(test_record)
def test_plug_type_map(self):
test = openhtf.Test(phase_one, phase_two)
self.assertIn(type(self.test_plug), test.plug_type_map.itervalues())
def test_patch_plugs_test(self, mock_plug):
mock_plug.do_stuff.return_value = _DO_STUFF_RETVAL
test_record = yield openhtf.Test(phase_retval(None), test_phase)
self._run_my_phase_in_test_asserts(mock_plug, test_record)
@htf.TestPhase(run_if=lambda: False)
def skip_phase(test):
"""Don't run this phase."""
def teardown(test):
test.logger.info('Running teardown')
if __name__ == '__main__':
test = htf.Test(
hello_world,
set_measurements,
dimensions,
attachments,
skip_phase,
measures_with_args.with_args(min=2, max=4),
# Some metadata fields, these in particular are used by mfg-inspector,
# but you can include any metadata fields.
test_name='MyTest',
test_description='OpenHTF Example Test',
test_version='1.0.0')
test.add_output_callbacks(
callbacks.OutputToFile(
'./{dut_id}.{metadata[test_name]}.{start_time_millis}.pickle'))
test.add_output_callbacks(
json_factory.OutputToJSON(
'./{dut_id}.{metadata[test_name]}.{start_time_millis}.json',
indent=4))
# Example of how to output to testrun protobuf format.
#test.add_output_callbacks(
# @htf.plug(tester=TestPlug)
# def test_plug(test, tester):
# messages = ["hola", "hi", "you're welcome"]
# to_person = ['name_' + str(val) for val in range(3)] # Generate names
# for msg, to_ in zip(messages, to_person):
# rsp_t = tester.sayHello(to_)
# tester.sendMessage(msg)
# This one since the plug is directly where I'm running
# the test if can be imported without any paths issues.
# I sugges creating plugs in the same location
# Test in the same location and after
# we moved them to the plugs for openHTF
@htf.plug(chamber=ChamberTe1007c)
def test_vdivider(test, chamber):
messages = ["hola", "hi", "you're welcome"]
to_person = ['name_' + str(val) for val in range(3)] # Generate names
for msg, to_ in zip(messages, to_person):
rsp_t = chamber.setTemperature(to_)
chamber.setHumidity(msg)
if __name__ == '__main__':
# We instantiate our OpenHTF test with the phases we want to run as args.
# Multiple phases would be passed as additional args, and additional
# keyword arguments may be passed as well. See other examples for more
# complex uses.
test = htf.Test(test_vdivider) # Names of the tests that I want to
test.execute(test_start=user_input.prompt_for_test_start())
