import openmc # Geometry ground_sphere = openmc.Sphere(0, -100.5, 0, 100, boundary_type='vacuum') cyl = openmc.YCylinder(0, -1, 0.5, boundary_type='vacuum') ymax = openmc.YPlane(1.0, boundary_type='vacuum') ymin = openmc.YPlane(0.3, boundary_type='vacuum') top_cap = openmc.Sphere(0, 1.0, -1, 0.5, boundary_type='vacuum') bottom_cap = openmc.Sphere(0, 0.3, -1, 0.5, boundary_type='vacuum') ground_cell = openmc.Cell(region=-ground_sphere) pill = openmc.Cell(region=((-cyl & -ymax & +ymin) | -top_cap | -bottom_cap)) another_sphere = openmc.Sphere(-1.5, 0.5, -1.0, 0.5, boundary_type='vacuum') another_sphere_cell = openmc.Cell(region=-another_sphere) ycone = openmc.YCone(1.5, 1.0, -1, 0.5, boundary_type='vacuum') cone_cell = openmc.Cell(region=(-ycone & -ymax & +ymin)) geometry = openmc.Geometry([ground_cell, pill, another_sphere_cell, cone_cell]) geometry.export_to_xml() # Placeholder materials file openmc.Materials().export_to_xml() # Minimal settings settings = openmc.Settings() settings.particles = 500 settings.batches = 10 settings.inactive = 1
# Instantiate a Materials collection and export to XML materials_file = openmc.Materials([uo2, helium, zircaloy, borated_water,normal_water,heavy_water]) materials_file.export_to_xml() ############################################################################### # Exporting to OpenMC geometry.xml file ############################################################################### # Instantiate ZCylinder surfaces fuel_or = openmc.ZCylinder(surface_id=1, x0=0, y0=0, r=0.39218, name='Fuel OR') clad_ir = openmc.ZCylinder(surface_id=2, x0=0, y0=0, r=0.40005, name='Clad IR') clad_or = openmc.ZCylinder(surface_id=3, x0=0, y0=0, r=0.45720, name='Clad OR') left = openmc.XPlane(surface_id=4, x0=-0.62992, name='left') right = openmc.XPlane(surface_id=5, x0=0.62992, name='right') bottom = openmc.YPlane(surface_id=6, y0=-0.62992, name='bottom') top = openmc.YPlane(surface_id=7, y0=0.62992, name='top') left.boundary_type = 'reflective' right.boundary_type = 'reflective' top.boundary_type = 'reflective' bottom.boundary_type = 'reflective' # Instantiate Cells fuel = openmc.Cell(cell_id=1, name='cell 1') gap = openmc.Cell(cell_id=2, name='cell 2') clad = openmc.Cell(cell_id=3, name='cell 3') water = openmc.Cell(cell_id=4, name='cell 4') # Use surface half-spaces to define regions fuel.region = -fuel_or
acrylic.add_nuclide('H1', 5.6642e-2)
acrylic.add_nuclide('O16', 1.4273e-2)
acrylic.add_nuclide('C0', 3.5648e-2)
acrylic.add_s_alpha_beta('c_H_in_CH2')
acrylic.set_density('g/cm3', 1.185)
mats = openmc.Materials([fuel, water, clad6061, rubber, acrylic])
mats.cross_sections = '/home/tang/nndc_hdf5/cross_sections.xml'
mats.export_to_xml()
#fuel cylinder
zc1 = openmc.ZCylinder(x0=0, y0=0, R=0.6325)
zc2 = openmc.ZCylinder(x0=0, y0=0, R=0.6415)
xp3 = openmc.XPlane(x0=-1.27)
xp4 = openmc.XPlane(x0=1.27)
yp5 = openmc.YPlane(y0=-1.27)
yp6 = openmc.YPlane(y0=1.27)
zp7 = openmc.ZPlane(z0=0.0)
zp8 = openmc.ZPlane(z0=92.075)
zp9 = openmc.ZPlane(z0=94.2975) #top 0f clad
xp10 = openmc.XPlane(x0=25.4)
xp11 = openmc.XPlane(x0=0.)
zc12 = openmc.ZCylinder(x0=0, y0=0, R=0.7075) #clad outer surface
xp13 = openmc.XPlane(x0=12.7)
yp19 = openmc.YPlane(y0=0.0)
yp20 = openmc.YPlane(y0=30.48)
yp21 = openmc.YPlane(y0=2.54)
zp23 = openmc.ZPlane(z0=-2.2225)
zc2=openmc.ZCylinder(x0=0,y0=0,R=0.635) zp7=openmc.ZPlane(z0= 0.0) zp8=openmc.ZPlane(z0=91.44) zp9=openmc.ZPlane(z0=91.92) #top 0f clad xp10=openmc.XPlane(x0=40.64 ) xp11=openmc.XPlane(x0= 0.0)#first xp12=openmc.XPlane(x0= 52.56) #second boundary xp13=openmc.XPlane(x0= 93.2) xp14=openmc.XPlane(x0= 105.12)#third xp15=openmc.XPlane(x0= 145.76) yp20=openmc.YPlane(y0=34.544 ) yp21=openmc.YPlane(y0=0 ) zp22=openmc.ZPlane(z0= 96.52) zp23=openmc.ZPlane(z0= -1.27) #side of water reflector xp24=openmc.XPlane(x0=175.76 ,boundary_type='vacuum') xp25=openmc.XPlane(x0=-30,boundary_type='vacuum') yp26=openmc.YPlane(y0=64.544,boundary_type='vacuum' ) yp27=openmc.YPlane(y0=-30,boundary_type='vacuum') zp28=openmc.ZPlane(z0=106.44,boundary_type='vacuum') #top of water zp29=openmc.ZPlane(z0=-3.81) zp30=openmc.ZPlane(z0=-19.11,boundary_type='vacuum' ) #bottom of water
def slab_mg(reps=None, as_macro=True):
"""Create a one-group, 1D slab model.
Parameters
----------
reps : list, optional
List of angular representations. Each item corresponds to materials and
dictates the angular representation of the multi-group cross
sections---isotropic ('iso') or angle-dependent ('ang'), and if Legendre
scattering or tabular scattering ('mu') is used. Thus, items can be
'ang', 'ang_mu', 'iso', or 'iso_mu'.
as_macro : bool, optional
Whether :class:`openmc.Macroscopic` is used
Returns
-------
model : openmc.model.Model
One-group, 1D slab model
"""
model = openmc.model.Model()
# Define materials needed for 1D/1G slab problem
mat_names = ['uo2', 'clad', 'lwtr']
mgxs_reps = ['ang', 'ang_mu', 'iso', 'iso_mu']
if reps is None:
reps = mgxs_reps
xs = []
i = 0
for mat in mat_names:
for rep in reps:
i += 1
name = mat + '_' + rep
xs.append(name)
if as_macro:
m = openmc.Material(name=str(i))
m.set_density('macro', 1.)
m.add_macroscopic(name)
else:
m = openmc.Material(name=str(i))
m.set_density('atom/b-cm', 1.)
m.add_nuclide(name, 1.0, 'ao')
model.materials.append(m)
# Define the materials file
model.xs_data = xs
model.materials.cross_sections = "../1d_mgxs.h5"
# Define surfaces.
# Assembly/Problem Boundary
left = openmc.XPlane(x0=0.0, boundary_type='reflective')
right = openmc.XPlane(x0=10.0, boundary_type='reflective')
bottom = openmc.YPlane(y0=0.0, boundary_type='reflective')
top = openmc.YPlane(y0=10.0, boundary_type='reflective')
# for each material add a plane
planes = [openmc.ZPlane(z0=0.0, boundary_type='reflective')]
dz = round(5. / float(len(model.materials)), 4)
for i in range(len(model.materials) - 1):
planes.append(openmc.ZPlane(z0=dz * float(i + 1)))
planes.append(openmc.ZPlane(z0=5.0, boundary_type='reflective'))
# Define cells for each material
model.geometry.root_universe = openmc.Universe(name='root universe')
xy = +left & -right & +bottom & -top
for i, mat in enumerate(model.materials):
c = openmc.Cell(fill=mat, region=xy & +planes[i] & -planes[i + 1])
model.geometry.root_universe.add_cell(c)
model.settings.batches = 10
model.settings.inactive = 5
model.settings.particles = 100
model.settings.source = openmc.Source(space=openmc.stats.Box(
[0.0, 0.0, 0.0], [10.0, 10.0, 5.]))
model.settings.energy_mode = "multi-group"
plot = openmc.Plot()
plot.filename = 'mat'
plot.origin = (5.0, 5.0, 2.5)
plot.width = (2.5, 2.5)
plot.basis = 'xz'
plot.pixels = (3000, 3000)
plot.color_by = 'material'
model.plots.append(plot)
return model
materials = openmc.Materials([uo2, water])
materials.export_to_xml()
L = pitch
fCylinders = [
openmc.ZCylinder(R=radius_fuel, x0=0.5 * L + i * L, y0=0.5 * L + j * L)
for j in range(3) for i in range(3)
]
x1 = openmc.XPlane(x0=0.0, boundary_type='reflective')
x2 = openmc.XPlane(x0=1 * L)
x3 = openmc.XPlane(x0=2 * L)
x4 = openmc.XPlane(x0=3 * L, boundary_type='reflective')
y1 = openmc.YPlane(y0=0.0, boundary_type='reflective')
y2 = openmc.YPlane(y0=1 * L)
y3 = openmc.YPlane(y0=2 * L)
y4 = openmc.YPlane(y0=3 * L, boundary_type='reflective')
xP = [x1, x2, x3, x4]
yP = [y1, y2, y3, y4]
waterReg = +x1 & -x4 & +y1 & -y4 & \
+fCylinders[0] & +fCylinders[1] & +fCylinders[2] & \
+fCylinders[3] & +fCylinders[4] & +fCylinders[5] & \
+fCylinders[6] & +fCylinders[7] & +fCylinders[8]
fCells = [
def generate_mat_and_geom(pln_num):
# 1.6 enriched fuel
fuel = openmc.Material(name='1.6% Fuel')
fuel.set_density('g/cm3', 10.31341)
fuel.add_nuclide('U235', 3.7503e-4)
fuel.add_nuclide('U238', 2.2625e-2)
fuel.add_nuclide('O16', 4.6007e-2)
# borated water
water = openmc.Material(name='Borated Water')
water.set_density('g/cm3', 0.740582)
water.add_nuclide('H1', 4.9457e-2)
water.add_nuclide('O16', 2.4732e-2)
water.add_nuclide('B10', 8.0042e-6)
# zircaloy
zircaloy = openmc.Material(name='Zircaloy')
zircaloy.set_density('g/cm3', 6.55)
zircaloy.add_nuclide('Zr90', 7.2758e-3)
# Instantiate a Materials collection
materials_file = openmc.Materials([fuel, water, zircaloy])
# Export to "materials.xml"
materials_file.export_to_xml()
# Create cylinders for the fuel and clad
NumPln = pln_num
fuel_radius = []
Rout = 0.392
Cout = 0.457
# darea = np.pi*Rout**2/NumRad
# area = 0
# Rlist = []
# for i in range(0,NumRad):
# area += darea
# r = np.sqrt(area/np.pi)
# Rlist.append(r)
# fuel_radius.append(openmc.ZCylinder(x0=0.0, y0=0.0, R=r))
clad_outer_radius = openmc.ZCylinder(x0=0.0, y0=0.0, R=Cout)
fuel_outer_radius = openmc.ZCylinder(x0=0.0, y0=0.0, R=Rout)
# Create a Universe to encapsulate a fuel pin
min_x = openmc.XPlane(x0=-0.63, boundary_type='reflective')
max_x = openmc.XPlane(x0=+0.63, boundary_type='reflective')
min_y = openmc.YPlane(y0=-0.63, boundary_type='reflective')
max_y = openmc.YPlane(y0=+0.63, boundary_type='reflective')
min_z = openmc.ZPlane(z0=-100., boundary_type='vacuum')
max_z = openmc.ZPlane(z0=+100., boundary_type='vacuum')
zmin = -100
zmax = 100
dx = (zmax - zmin) / pln_num
planes = []
for i in range(1, NumPln):
planes.append(openmc.ZPlane(z0=dx * i - 100))
# top = openmc.ZPlane(z0=zmax, boundary_type='reflective')
fuelcelllist = []
for i in range(0, len(planes) + 1):
if i == 0:
fuel_cell = openmc.Cell(name='fuel',
fill=fuel,
region=-fuel_outer_radius & +min_z
& -planes[0])
elif i == pln_num - 1:
fuel_cell = openmc.Cell(name='fuel',
fill=fuel,
region=-fuel_outer_radius
& +planes[pln_num - 2] & -max_z)
else:
fuel_cell = openmc.Cell(name='fuel',
fill=fuel,
region=-fuel_outer_radius & +planes[i - 1]
& -planes[i])
fuelcelllist.append(fuel_cell)
fuel_cell_universe = openmc.Universe(name='Total Fuel Cell')
for j in range(0, len(fuelcelllist)):
fuel_cell_universe.add_cell(fuelcelllist[j])
#Create total fuel cell
total_fuel_cell = openmc.Cell(name='totalfuelcell')
total_fuel_cell.fill = fuel_cell_universe
total_fuel_cell.region = -fuel_outer_radius & +min_z & -max_z
# Create a clad Cell
clad_cell = openmc.Cell(name='1.6% Clad')
clad_cell.fill = zircaloy
clad_cell.region = +fuel_outer_radius & -clad_outer_radius & +min_x & -max_x & +min_y & -max_y & +min_z & -max_z
# Create a moderator Cell
moderator_cell = openmc.Cell(name='1.6% Moderator')
moderator_cell.fill = water
moderator_cell.region = +clad_outer_radius & +min_x & -max_x & +min_y & -max_y & +min_z & -max_z
# Create root Universe
root_universe = openmc.Universe(universe_id=0, name='root universe')
root_universe.add_cell(total_fuel_cell)
root_universe.add_cell(moderator_cell)
root_universe.add_cell(clad_cell)
# Create Geometry and set root Universe
geometry = openmc.Geometry(root_universe)
# Export to "geometry.xml"
geometry.export_to_xml()
# openmc.plot_geometry(output=False)
return fuelcelllist, total_fuel_cell
def build_default_materials_and_geometry(self):
# Define materials needed for 1D/1G slab problem
# This time do using nuclide, not macroscopic
uo2 = openmc.Material(name='UO2', material_id=1)
uo2.set_density('sum', 1.0)
uo2.add_nuclide("uo2_iso", 1.0)
clad = openmc.Material(name='Clad', material_id=2)
clad.set_density('sum', 1.0)
clad.add_nuclide("clad_ang_mu", 1.0)
# water_data = openmc.Nuclide('lwtr_iso_mu', '71c')
water = openmc.Material(name='LWTR', material_id=3)
water.set_density('sum', 1.0)
water.add_nuclide("lwtr_iso_mu", 1.0)
# Define the materials file.
self.materials.default_xs = '71c'
self.materials += (uo2, clad, water)
# Define surfaces.
# Assembly/Problem Boundary
left = openmc.XPlane(x0=0.0,
surface_id=200,
boundary_type='reflective')
right = openmc.XPlane(x0=10.0,
surface_id=201,
boundary_type='reflective')
bottom = openmc.YPlane(y0=0.0,
surface_id=300,
boundary_type='reflective')
top = openmc.YPlane(y0=10.0,
surface_id=301,
boundary_type='reflective')
down = openmc.ZPlane(z0=0.0, surface_id=0, boundary_type='reflective')
fuel_clad_intfc = openmc.ZPlane(z0=2.0, surface_id=1)
clad_lwtr_intfc = openmc.ZPlane(z0=2.4, surface_id=2)
up = openmc.ZPlane(z0=5.0, surface_id=3, boundary_type='reflective')
# Define cells
c1 = openmc.Cell(cell_id=1)
c1.region = +left & -right & +bottom & -top & +down & -fuel_clad_intfc
c1.fill = uo2
c2 = openmc.Cell(cell_id=2)
c2.region = +left & -right & +bottom & -top & +fuel_clad_intfc & -clad_lwtr_intfc
c2.fill = clad
c3 = openmc.Cell(cell_id=3)
c3.region = +left & -right & +bottom & -top & +clad_lwtr_intfc & -up
c3.fill = water
# Define root universe.
root = openmc.Universe(universe_id=0, name='root universe')
root.add_cells((c1, c2, c3))
# Define the geometry file.
geometry = openmc.Geometry()
geometry.root_universe = root
self.geometry = geometry
def _read_surfaces(self):
self.n_surfaces = self._f['geometry/n_surfaces'].value
# Initialize dictionary for each Surface
# Keys - Surface keys
# Values - Surfacee objects
self.surfaces = {}
for key in self._f['geometry/surfaces'].keys():
if key == 'n_surfaces':
continue
surface_id = int(key.lstrip('surface '))
index = self._f['geometry/surfaces'][key]['index'].value
name = self._f['geometry/surfaces'][key]['name'].value.decode()
surf_type = self._f['geometry/surfaces'][key]['type'].value.decode(
)
bc = self._f['geometry/surfaces'][key][
'boundary_condition'].value.decode()
coeffs = self._f['geometry/surfaces'][key]['coefficients'][...]
# Create the Surface based on its type
if surf_type == 'x-plane':
x0 = coeffs[0]
surface = openmc.XPlane(surface_id, bc, x0, name)
elif surf_type == 'y-plane':
y0 = coeffs[0]
surface = openmc.YPlane(surface_id, bc, y0, name)
elif surf_type == 'z-plane':
z0 = coeffs[0]
surface = openmc.ZPlane(surface_id, bc, z0, name)
elif surf_type == 'plane':
A = coeffs[0]
B = coeffs[1]
C = coeffs[2]
D = coeffs[3]
surface = openmc.Plane(surface_id, bc, A, B, C, D, name)
elif surf_type == 'x-cylinder':
y0 = coeffs[0]
z0 = coeffs[1]
R = coeffs[2]
surface = openmc.XCylinder(surface_id, bc, y0, z0, R, name)
elif surf_type == 'y-cylinder':
x0 = coeffs[0]
z0 = coeffs[1]
R = coeffs[2]
surface = openmc.YCylinder(surface_id, bc, x0, z0, R, name)
elif surf_type == 'z-cylinder':
x0 = coeffs[0]
y0 = coeffs[1]
R = coeffs[2]
surface = openmc.ZCylinder(surface_id, bc, x0, y0, R, name)
elif surf_type == 'sphere':
x0 = coeffs[0]
y0 = coeffs[1]
z0 = coeffs[2]
R = coeffs[3]
surface = openmc.Sphere(surface_id, bc, x0, y0, z0, R, name)
elif surf_type in ['x-cone', 'y-cone', 'z-cone']:
x0 = coeffs[0]
y0 = coeffs[1]
z0 = coeffs[2]
R2 = coeffs[3]
if surf_type == 'x-cone':
surface = openmc.XCone(surface_id, bc, x0, y0, z0, R2,
name)
if surf_type == 'y-cone':
surface = openmc.YCone(surface_id, bc, x0, y0, z0, R2,
name)
if surf_type == 'z-cone':
surface = openmc.ZCone(surface_id, bc, x0, y0, z0, R2,
name)
elif surf_type == 'quadric':
a, b, c, d, e, f, g, h, j, k = coeffs
surface = openmc.Quadric(surface_id, bc, a, b, c, d, e, f, g,
h, j, k, name)
# Add Surface to global dictionary of all Surfaces
self.surfaces[index] = surface
def make_geometry(self, mats):
# Instantiate Universe
root = openmc.Universe(universe_id=0, name='root universe')
cells = []
if self.geom == 'IN':
left = openmc.XPlane(x0=-INF, boundary_type='reflective')
right = openmc.XPlane(x0=INF, boundary_type='reflective')
bottom = openmc.YPlane(y0=-INF, boundary_type='reflective')
top = openmc.YPlane(y0=INF, boundary_type='reflective')
down = openmc.ZPlane(z0=-INF, boundary_type='reflective')
up = openmc.ZPlane(z0=INF, boundary_type='reflective')
# Instantiate Cells
cells = []
cells.append(openmc.Cell(name='fissile'))
yz = (+bottom & -top) & (+down & -up)
cells[-1].region = (+left & -right) & yz
# Register Materials with Cells
cells[-1].fill = mats[0]
elif self.geom == 'SL':
surfs = []
surfs.append(openmc.XPlane(x0=0., boundary_type='reflective'))
for r, rad in enumerate(self.rad):
if r == len(self.rad) - 1:
surfs.append(openmc.XPlane(x0=rad, boundary_type='vacuum'))
else:
surfs.append(openmc.XPlane(x0=rad))
bottom = openmc.YPlane(y0=-INF, boundary_type='reflective')
top = openmc.YPlane(y0=INF, boundary_type='reflective')
down = openmc.ZPlane(z0=-INF, boundary_type='reflective')
up = openmc.ZPlane(z0=INF, boundary_type='reflective')
# Instantiate Cells
yz = (+bottom & -top) & (+down & -up)
cells = []
for c in range(len(surfs) - 1):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c] & -surfs[c + 1]) & yz
cells[-1].fill = mats[c]
elif self.geom == 'SL-NS':
surfs = []
surfs.append(openmc.XPlane(x0=-self.rad[0],
boundary_type='vacuum'))
for r, rad in enumerate(self.rad):
if r == len(self.rad) - 1:
surfs.append(openmc.XPlane(x0=rad, boundary_type='vacuum'))
else:
surfs.append(openmc.XPlane(x0=rad))
bottom = openmc.YPlane(y0=-INF, boundary_type='reflective')
top = openmc.YPlane(y0=INF, boundary_type='reflective')
down = openmc.ZPlane(z0=-INF, boundary_type='reflective')
up = openmc.ZPlane(z0=INF, boundary_type='reflective')
# Instantiate Cells
yz = (+bottom & -top) & (+down & -up)
cells = []
for c in range(len(surfs) - 1):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c] & -surfs[c + 1]) & yz
cells[-1].fill = mats[c]
elif self.geom == 'FENA':
surfs = []
surfs.append(openmc.XPlane(x0=0.0, boundary_type='vacuum'))
for c in range(len(mats) - 1):
surfs.append(openmc.XPlane(x0=self.rad[c]))
surfs.append(openmc.XPlane(x0=self.rad[-1],
boundary_type='vacuum'))
bottom = openmc.YPlane(y0=-INF, boundary_type='reflective')
top = openmc.YPlane(y0=INF, boundary_type='reflective')
down = openmc.ZPlane(z0=-INF, boundary_type='reflective')
up = openmc.ZPlane(z0=INF, boundary_type='reflective')
# Instantiate Cells
yz = (+bottom & -top) & (+down & -up)
cells = []
for c in range(len(mats)):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c] & -surfs[c + 1]) & yz
cells[-1].fill = mats[c]
elif self.geom == 'CY':
surfs = []
for r, rad in enumerate(self.rad):
if r == len(self.rad) - 1:
surfs.append(
openmc.ZCylinder(R=rad, boundary_type='vacuum'))
else:
surfs.append(openmc.ZCylinder(R=rad))
# Instantiate Cells
cells = []
cells.append(openmc.Cell())
cells[-1].region = -surfs[0]
cells[-1].fill = mats[0]
for c in range(1, len(surfs)):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c - 1] & -surfs[c])
cells[-1].fill = mats[c]
elif self.geom == 'SP':
surfs = []
for r, rad in enumerate(self.rad):
if r == len(self.rad) - 1:
surfs.append(openmc.Sphere(R=rad, boundary_type='vacuum'))
else:
surfs.append(openmc.Sphere(R=rad))
# Instantiate Cells
cells = []
cells.append(openmc.Cell())
cells[-1].region = -surfs[0]
cells[-1].fill = mats[0]
for c in range(1, len(surfs)):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c - 1] & -surfs[c])
cells[-1].fill = mats[c]
elif self.geom == 'ISLC':
surfs = []
surfs.append(openmc.XPlane(x0=0., boundary_type='reflective'))
for r, rad in enumerate(self.rad):
if r == len(self.rad) - 1:
surfs.append(
openmc.XPlane(x0=rad, boundary_type='reflective'))
else:
surfs.append(openmc.XPlane(x0=rad))
bottom = openmc.YPlane(y0=-INF, boundary_type='reflective')
top = openmc.YPlane(y0=INF, boundary_type='reflective')
down = openmc.ZPlane(z0=-INF, boundary_type='reflective')
up = openmc.ZPlane(z0=INF, boundary_type='reflective')
# Instantiate Cells
yz = (+bottom & -top) & (+down & -up)
cells = []
for c in range(len(surfs) - 1):
cells.append(openmc.Cell())
cells[-1].region = (+surfs[c] & -surfs[c + 1]) & yz
cells[-1].fill = mats[c]
# Register Cells with Universe
root.add_cells(cells)
# Instantiate a Geometry, register the root Universe, and export to XML
geometry = openmc.Geometry(root)
return geometry
nxsurfs = nxbins + 1
nysurfs = nybins + 1
nzsurfs = nzbins + 1
XPLANES = []
YPLANES = []
ZPLANES = []
for i in range(nxsurfs):
if (i == 0) or (i == nxsurfs - 1):
XPLANES.append(openmc.XPlane(x0 = i*dx, boundary_type='vacuum'))
else:
XPLANES.append(openmc.XPlane(x0 = i*dx))
for j in range(nysurfs):
if (j == 0) or (j == nysurfs - 1):
YPLANES.append(openmc.YPlane(y0 = j*dy, boundary_type='vacuum'))
else:
YPLANES.append(openmc.YPlane(y0 = j*dy))
for k in range(nzsurfs):
if (k == 0) or (k == nzsurfs - 1):
ZPLANES.append(openmc.ZPlane(z0 = k*dz, boundary_type='vacuum'))
else:
ZPLANES.append(openmc.ZPlane(z0 = k*dz))
CELLS = []
for i in range(nxbins):
for j in range(nybins):
for k in range(nzbins):
xsname = str(i)+"."+str(j)+"."+str(k)
CELLS.append(openmc.Cell())
def generate_geometry(n_rings, n_wedges):
""" Generates example geometry.
This function creates the initial geometry, a 9 pin reflective problem.
One pin, containing gadolinium, is discretized into sectors.
In addition to what one would do with the general OpenMC geometry code, it
is necessary to create a dictionary, volume, that maps a cell ID to a
volume. Further, by naming cells the same as the above materials, the code
can automatically handle the mapping.
Parameters
----------
n_rings : int
Number of rings to generate for the geometry
n_wedges : int
Number of wedges to generate for the geometry
"""
pitch = 1.26197
r_fuel = 0.412275
r_gap = 0.418987
r_clad = 0.476121
n_pin = 3
# This table describes the 'fuel' to actual type mapping
# It's not necessary to do it this way. Just adjust the initial conditions
# below.
mapping = [
'fuel', 'fuel', 'fuel', 'fuel', 'fuel_gd', 'fuel', 'fuel', 'fuel',
'fuel'
]
# Form pin cell
fuel_u, v_segment, v_gap, v_clad = segment_pin(n_rings, n_wedges, r_fuel,
r_gap, r_clad)
# Form lattice
all_water_c = openmc.Cell(name='cool')
all_water_u = openmc.Universe(cells=(all_water_c, ))
lattice = openmc.RectLattice()
lattice.pitch = [pitch] * 2
lattice.lower_left = [-pitch * n_pin / 2, -pitch * n_pin / 2]
lattice_array = [[fuel_u for i in range(n_pin)] for j in range(n_pin)]
lattice.universes = lattice_array
lattice.outer = all_water_u
# Bound universe
x_low = openmc.XPlane(-pitch * n_pin / 2, boundary_type='reflective')
x_high = openmc.XPlane(pitch * n_pin / 2, boundary_type='reflective')
y_low = openmc.YPlane(-pitch * n_pin / 2, boundary_type='reflective')
y_high = openmc.YPlane(pitch * n_pin / 2, boundary_type='reflective')
z_low = openmc.ZPlane(-10, boundary_type='reflective')
z_high = openmc.ZPlane(10, boundary_type='reflective')
# Compute bounding box
lower_left = [-pitch * n_pin / 2, -pitch * n_pin / 2, -10]
upper_right = [pitch * n_pin / 2, pitch * n_pin / 2, 10]
root_c = openmc.Cell(fill=lattice)
root_c.region = (+x_low & -x_high & +y_low & -y_high & +z_low & -z_high)
root_u = openmc.Universe(universe_id=0, cells=(root_c, ))
geometry = openmc.Geometry(root_u)
v_cool = pitch**2 - (v_gap + v_clad + n_rings * n_wedges * v_segment)
# Store volumes for later usage
volume = {'fuel': v_segment, 'gap': v_gap, 'clad': v_clad, 'cool': v_cool}
return geometry, volume, mapping, lower_left, upper_right
def _build_inputs(self):
# Define TRISO matrials
fuel = openmc.Material()
fuel.set_density('g/cm3', 10.5)
fuel.add_nuclide('U235', 0.14154)
fuel.add_nuclide('U238', 0.85846)
fuel.add_nuclide('C0', 0.5)
fuel.add_nuclide('O16', 1.5)
porous_carbon = openmc.Material()
porous_carbon.set_density('g/cm3', 1.0)
porous_carbon.add_nuclide('C0', 1.0)
porous_carbon.add_s_alpha_beta('c_Graphite')
ipyc = openmc.Material()
ipyc.set_density('g/cm3', 1.90)
ipyc.add_nuclide('C0', 1.0)
ipyc.add_s_alpha_beta('c_Graphite')
sic = openmc.Material()
sic.set_density('g/cm3', 3.20)
sic.add_element('Si', 1.0)
sic.add_nuclide('C0', 1.0)
opyc = openmc.Material()
opyc.set_density('g/cm3', 1.87)
opyc.add_nuclide('C0', 1.0)
opyc.add_s_alpha_beta('c_Graphite')
graphite = openmc.Material()
graphite.set_density('g/cm3', 1.1995)
graphite.add_nuclide('C0', 1.0)
graphite.add_s_alpha_beta('c_Graphite')
# Create TRISO particles
spheres = [
openmc.Sphere(R=r * 1e-4) for r in [212.5, 312.5, 347.5, 382.5]
]
c1 = openmc.Cell(fill=fuel, region=-spheres[0])
c2 = openmc.Cell(fill=porous_carbon, region=+spheres[0] & -spheres[1])
c3 = openmc.Cell(fill=ipyc, region=+spheres[1] & -spheres[2])
c4 = openmc.Cell(fill=sic, region=+spheres[2] & -spheres[3])
c5 = openmc.Cell(fill=opyc, region=+spheres[3])
inner_univ = openmc.Universe(cells=[c1, c2, c3, c4, c5])
outer_radius = 422.5 * 1e-4
trisos = openmc.model.pack_trisos(radius=outer_radius,
fill=inner_univ,
domain_shape='cube',
domain_length=1.,
domain_center=(0., 0., 0.),
n_particles=100)
# Define box to contain lattice
min_x = openmc.XPlane(x0=-0.5, boundary_type='reflective')
max_x = openmc.XPlane(x0=0.5, boundary_type='reflective')
min_y = openmc.YPlane(y0=-0.5, boundary_type='reflective')
max_y = openmc.YPlane(y0=0.5, boundary_type='reflective')
min_z = openmc.ZPlane(z0=-0.5, boundary_type='reflective')
max_z = openmc.ZPlane(z0=0.5, boundary_type='reflective')
box = openmc.Cell(region=+min_x & -max_x & +min_y & -max_y & +min_z
& -max_z)
# Create lattice
ll, ur = box.region.bounding_box
shape = (3, 3, 3)
pitch = (ur - ll) / shape
lattice = openmc.model.create_triso_lattice(trisos, ll, pitch, shape,
graphite)
box.fill = lattice
root = openmc.Universe(0, cells=[box])
geom = openmc.Geometry(root)
geom.export_to_xml()
settings = openmc.Settings()
settings.batches = 5
settings.inactive = 0
settings.particles = 100
settings.source = openmc.Source(space=openmc.stats.Point())
settings.export_to_xml()
mats = openmc.Materials(
[fuel, porous_carbon, ipyc, sic, opyc, graphite])
mats.export_to_xml()
mats = openmc.Materials([fuel, clad, water])
mats.cross_sections = '/home/tang/nndc_hdf5/cross_sections.xml'
mats.export_to_xml()
#fuel
zc1 = openmc.ZCylinder(x0=0, y0=0, R=0.625) #fuel
zc2 = openmc.ZCylinder(x0=0, y0=0, R=0.7085) #clad
zp8 = openmc.ZPlane(z0=144.15) #top fuel
zp7 = openmc.ZPlane(z0=0.0) #bottom of fuel
#lattice
xp10 = openmc.XPlane(x0=36.98)
xp11 = openmc.XPlane(x0=0.)
yp20 = openmc.YPlane(y0=36.98)
yp19 = openmc.YPlane(y0=0.)
sph9 = openmc.Sphere(x0=18.49,
y0=18.49,
z0=72.075,
R=150.0,
boundary_type='vacuum')
zp11 = openmc.ZPlane(z0=73.73) #critical water level=73.73
#water reflector=30.0 cm
xp31 = openmc.XPlane(x0=66.98)
xp32 = openmc.XPlane(x0=-30.)
yp33 = openmc.YPlane(y0=66.98)
###############################################################################
# Exporting to OpenMC geometry.xml file
###############################################################################
# top and bottom surfaces (dz)
top_surface = openmc.ZPlane(z0=T_pitch / 2 + (z_thickness - 1) / 2 * T_pitch,
boundary_type='reflective')
bot_surface = openmc.ZPlane(z0=-(T_pitch / 2 +
(z_thickness - 1) / 2 * T_pitch),
boundary_type='reflective')
# Outermost Hexagon
H_m = 1 / tan(pi / 6)
H_1 = openmc.YPlane(0.5 * H_side / tan(pi / 6), 'periodic')
H_2 = plane(-H_m, 0.5 * H_side, 0.5 * H_side / tan(pi / 6), 'periodic')
H_3 = plane(H_m, 0.5 * H_side, -0.5 * H_side / tan(pi / 6), 'periodic')
H_4 = openmc.YPlane(-0.5 * H_side / tan(pi / 6), 'periodic')
H_5 = plane(-H_m, -0.5 * H_side, -0.5 * H_side / tan(pi / 6), 'periodic')
H_6 = plane(H_m, -0.5 * H_side, 0.5 * H_side / tan(pi / 6), 'periodic')
H_1.periodic_surface = H_4
H_2.periodic_surface = H_5
H_3.periodic_surface = H_6
H_region = -H_1 & +H_4 & -H_2 & +H_3 & +H_5 & -H_6
H_cell = openmc.Cell(fill=graphite)
H_cell.region = H_region & -top_surface & +bot_surface
# Diamond Plank Area
A1_D_cell = openmc.Cell(fill=flibe)
A1_D_cell.region = region_maker('A1', 'D') & -top_surface & +bot_surface
fuel = openmc.Cell(1, 'fuel') fuel.fill = uo2 fuel.region = fuel_region gap = openmc.Cell(2, 'air gap') gap.region = gap_region clad = openmc.Cell(3, 'clad') clad.fill = zirconium clad.region = clad_region pitch = 1.26 left = openmc.XPlane(x0=-pitch/2, boundary_type='reflective') right = openmc.XPlane(x0=pitch/2, boundary_type='reflective') bottom = openmc.YPlane(y0=-pitch/2, boundary_type='reflective') top = openmc.YPlane(y0=pitch/2, boundary_type='reflective') water_region = +left & -right & +bottom & -top & +clad_or moderator = openmc.Cell(4, 'moderator') moderator.fill = water moderator.region = water_region box = openmc.rectangular_prism(width=pitch, height=pitch, boundary_type='reflective') water_region = box & +clad_or root = openmc.Universe(cells=(fuel, gap, clad, moderator)) geom = openmc.Geometry() geom.root_universe = root
# Define water and zircaloy materials (always at 600 K)
water = openmc.Material(name='H2O', temperature=600.0)
water.set_density(units='sum')
for nuc, density in water_comp[600]:
water.add_nuclide(nuc, density)
water.add_s_alpha_beta('c_H_in_H2O')
zircaloy = openmc.Material(name='Zircaloy', temperature=600.0)
zircaloy.set_density('atom/b-cm', clad_density[600])
zircaloy.add_element('Zr', 1.0)
for T in 600, 900:
# Create box to bound pin-cell -- dimensions depend on T
x_min = openmc.XPlane(x0=-pitch[T]/2, boundary_type='reflective')
x_max = openmc.XPlane(x0=+pitch[T]/2, boundary_type='reflective')
y_min = openmc.YPlane(y0=-pitch[T]/2, boundary_type='reflective')
y_max = openmc.YPlane(y0=+pitch[T]/2, boundary_type='reflective')
z_min = openmc.ZPlane(z0=-10.0, boundary_type='reflective')
z_max = openmc.ZPlane(z0=+10.0, boundary_type='reflective')
box = +x_min & -x_max & +y_min & -y_max & +z_min & -z_max
# Define source as box
settings.source = openmc.Source(space=openmc.stats.Box(
*box.bounding_box))
# Surfaces for fuel/clad
fuel_outer = openmc.ZCylinder(R=fuel_or[T])
clad_inner = openmc.ZCylinder(R=clad_ir[T])
clad_outer = openmc.ZCylinder(R=clad_or[T])
# Define cells within pin-cell
def build_cells(self, bc=None):
"""Generates a lattice of universes with the same dimensionality
as the mesh object. The individual cells/universes produced
will not have material definitions applied and so downstream code
will have to apply that information.
Parameters
----------
bc : iterable of {'reflective', 'periodic', 'transmission', 'vacuum', or 'white'}
Boundary conditions for each of the four faces of a rectangle
(if applying to a 2D mesh) or six faces of a parallelepiped
(if applying to a 3D mesh) provided in the following order:
[x min, x max, y min, y max, z min, z max]. 2-D cells do not
contain the z min and z max entries. Defaults to 'reflective' for
all faces.
Returns
-------
root_cell : openmc.Cell
The cell containing the lattice representing the mesh geometry;
this cell is a single parallelepiped with boundaries matching
the outermost mesh boundary with the boundary conditions from bc
applied.
cells : iterable of openmc.Cell
The list of cells within each lattice position mimicking the mesh
geometry.
"""
if bc is None:
bc = ['reflective'] * 6
if len(bc) not in (4, 6):
raise ValueError('Boundary condition must be of length 4 or 6')
for entry in bc:
cv.check_value('bc', entry, _BOUNDARY_TYPES)
n_dim = len(self.dimension)
# Build the cell which will contain the lattice
xplanes = [
openmc.XPlane(self.lower_left[0], boundary_type=bc[0]),
openmc.XPlane(self.upper_right[0], boundary_type=bc[1])
]
if n_dim == 1:
yplanes = [
openmc.YPlane(-1e10, boundary_type='reflective'),
openmc.YPlane(1e10, boundary_type='reflective')
]
else:
yplanes = [
openmc.YPlane(self.lower_left[1], boundary_type=bc[2]),
openmc.YPlane(self.upper_right[1], boundary_type=bc[3])
]
if n_dim <= 2:
# Would prefer to have the z ranges be the max supported float, but
# these values are apparently different between python and Fortran.
# Choosing a safe and sane default.
# Values of +/-1e10 are used here as there seems to be an
# inconsistency between what numpy uses as the max float and what
# Fortran expects for a real(8), so this avoids code complication
# and achieves the same goal.
zplanes = [
openmc.ZPlane(-1e10, boundary_type='reflective'),
openmc.ZPlane(1e10, boundary_type='reflective')
]
else:
zplanes = [
openmc.ZPlane(self.lower_left[2], boundary_type=bc[4]),
openmc.ZPlane(self.upper_right[2], boundary_type=bc[5])
]
root_cell = openmc.Cell()
root_cell.region = ((+xplanes[0] & -xplanes[1]) &
(+yplanes[0] & -yplanes[1]) &
(+zplanes[0] & -zplanes[1]))
# Build the universes which will be used for each of the (i,j,k)
# locations within the mesh.
# We will concurrently build cells to assign to these universes
cells = []
universes = []
for _ in self.indices:
cells.append(openmc.Cell())
universes.append(openmc.Universe())
universes[-1].add_cell(cells[-1])
lattice = openmc.RectLattice()
lattice.lower_left = self.lower_left
# Assign the universe and rotate to match the indexing expected for
# the lattice
if n_dim == 1:
universe_array = np.array([universes])
elif n_dim == 2:
universe_array = np.empty(self.dimension[::-1],
dtype=openmc.Universe)
i = 0
for y in range(self.dimension[1] - 1, -1, -1):
for x in range(self.dimension[0]):
universe_array[y][x] = universes[i]
i += 1
else:
universe_array = np.empty(self.dimension[::-1],
dtype=openmc.Universe)
i = 0
for z in range(self.dimension[2]):
for y in range(self.dimension[1] - 1, -1, -1):
for x in range(self.dimension[0]):
universe_array[z][y][x] = universes[i]
i += 1
lattice.universes = universe_array
if self.width is not None:
lattice.pitch = self.width
else:
dx = ((self.upper_right[0] - self.lower_left[0]) /
self.dimension[0])
if n_dim == 1:
lattice.pitch = [dx]
elif n_dim == 2:
dy = ((self.upper_right[1] - self.lower_left[1]) /
self.dimension[1])
lattice.pitch = [dx, dy]
else:
dy = ((self.upper_right[1] - self.lower_left[1]) /
self.dimension[1])
dz = ((self.upper_right[2] - self.lower_left[2]) /
self.dimension[2])
lattice.pitch = [dx, dy, dz]
# Fill Cell with the Lattice
root_cell.fill = lattice
return root_cell, cells
zp7 = openmc.ZPlane(z0=0.0) zp8 = openmc.ZPlane(z0=92.075) zp9 = openmc.ZPlane(z0=94.2975) #top 0f clad xp10 = openmc.XPlane(x0=38.1) #first cluster xp11 = openmc.XPlane(x0=0.0) zc12 = openmc.ZCylinder(x0=0, y0=0, R=0.7075) #clad outer surface xp14 = openmc.XPlane(x0=84.1) #second cluster xp15 = openmc.XPlane(x0=46) #second cluster xp16 = openmc.XPlane(x0=130.1) #third cluster xp17 = openmc.XPlane(x0=92) #third cluster yp19 = openmc.YPlane(y0=0.0) yp20 = openmc.YPlane(y0=20.32) zp23 = openmc.ZPlane(z0=-2.2225) #side of water reflector xp24 = openmc.XPlane(x0=160.6, boundary_type='vacuum') xp25 = openmc.XPlane(x0=-30.5, boundary_type='vacuum') yp26 = openmc.YPlane(y0=50.82, boundary_type='vacuum') yp27 = openmc.YPlane(y0=-30.5, boundary_type='vacuum') zp28 = openmc.ZPlane(z0=107.075, boundary_type='vacuum') #top of water zp29 = openmc.ZPlane(z0=-4.7625) zp35 = openmc.ZPlane(z0=-20.0625, boundary_type='vacuum') #bottom of water ##ss plate yp41 = openmc.YPlane(y0=-7.64)
def get_openmc_surface(opencg_surface):
"""Return an OpenMC surface corresponding to an OpenCG surface.
Parameters
----------
opencg_surface : opencg.Surface
OpenCG surface
Returns
-------
openmc_surface : openmc.surface.Surface
Equivalent OpenMC surface
"""
if not isinstance(opencg_surface, opencg.Surface):
msg = 'Unable to create an OpenMC Surface from "{0}" which ' \
'is not an OpenCG Surface'.format(opencg_surface)
raise ValueError(msg)
global openmc_surface
surface_id = opencg_surface.id
# If this Surface was already created, use it
if surface_id in OPENMC_SURFACES:
return OPENMC_SURFACES[surface_id]
# Create an OpenMC Surface to represent this OpenCG Surface
name = opencg_surface.name
# Correct for OpenMC's syntax for Surfaces dividing Cells
boundary = opencg_surface.boundary_type
if boundary == 'interface':
boundary = 'transmission'
if opencg_surface.type == 'plane':
A = opencg_surface.a
B = opencg_surface.b
C = opencg_surface.c
D = opencg_surface.d
openmc_surface = openmc.Plane(surface_id, boundary, A, B, C, D, name)
elif opencg_surface.type == 'x-plane':
x0 = opencg_surface.x0
openmc_surface = openmc.XPlane(surface_id, boundary, x0, name)
elif opencg_surface.type == 'y-plane':
y0 = opencg_surface.y0
openmc_surface = openmc.YPlane(surface_id, boundary, y0, name)
elif opencg_surface.type == 'z-plane':
z0 = opencg_surface.z0
openmc_surface = openmc.ZPlane(surface_id, boundary, z0, name)
elif opencg_surface.type == 'x-cylinder':
y0 = opencg_surface.y0
z0 = opencg_surface.z0
R = opencg_surface.r
openmc_surface = openmc.XCylinder(surface_id, boundary, y0, z0, R,
name)
elif opencg_surface.type == 'y-cylinder':
x0 = opencg_surface.x0
z0 = opencg_surface.z0
R = opencg_surface.r
openmc_surface = openmc.YCylinder(surface_id, boundary, x0, z0, R,
name)
elif opencg_surface.type == 'z-cylinder':
x0 = opencg_surface.x0
y0 = opencg_surface.y0
R = opencg_surface.r
openmc_surface = openmc.ZCylinder(surface_id, boundary, x0, y0, R,
name)
else:
msg = 'Unable to create an OpenMC Surface from an OpenCG ' \
'Surface of type "{0}" since it is not a compatible ' \
'Surface type in OpenMC'.format(opencg_surface.type)
raise ValueError(msg)
# Add the OpenMC Surface to the global collection of all OpenMC Surfaces
OPENMC_SURFACES[surface_id] = openmc_surface
# Add the OpenCG Surface to the global collection of all OpenCG Surfaces
OPENCG_SURFACES[surface_id] = opencg_surface
return openmc_surface
# Instantiate a Materials collection and export to XML
materials_file = openmc.Materials([fuel1, fuel2, moderator])
materials_file.export_to_xml()
###############################################################################
# Exporting to OpenMC geometry.xml file
###############################################################################
# Instantiate planar surfaces
x1 = openmc.XPlane(surface_id=1, x0=-10)
x2 = openmc.XPlane(surface_id=2, x0=-7)
x3 = openmc.XPlane(surface_id=3, x0=-4)
x4 = openmc.XPlane(surface_id=4, x0=4)
x5 = openmc.XPlane(surface_id=5, x0=7)
x6 = openmc.XPlane(surface_id=6, x0=10)
y1 = openmc.YPlane(surface_id=11, y0=-10)
y2 = openmc.YPlane(surface_id=12, y0=-7)
y3 = openmc.YPlane(surface_id=13, y0=-4)
y4 = openmc.YPlane(surface_id=14, y0=4)
y5 = openmc.YPlane(surface_id=15, y0=7)
y6 = openmc.YPlane(surface_id=16, y0=10)
z1 = openmc.ZPlane(surface_id=21, z0=-10)
z2 = openmc.ZPlane(surface_id=22, z0=-7)
z3 = openmc.ZPlane(surface_id=23, z0=-4)
z4 = openmc.ZPlane(surface_id=24, z0=4)
z5 = openmc.ZPlane(surface_id=25, z0=7)
z6 = openmc.ZPlane(surface_id=26, z0=10)
# Set vacuum boundary conditions on outside
for surface in [x1, x6, y1, y6, z1, z6]:
surface.boundary_type = 'vacuum'
def get_openmc_surface(openmoc_surface):
"""Return an OpenMC surface corresponding to an OpenMOC surface.
Parameters
----------
openmoc_surface : openmoc.Surface
OpenMOC surface
Returns
-------
openmc_surface : openmc.Surface
Equivalent OpenMC surface
"""
cv.check_type('openmoc_surface', openmoc_surface, openmoc.Surface)
surface_id = openmoc_surface.getId()
# If this Surface was already created, use it
if surface_id in OPENMC_SURFACES:
return OPENMC_SURFACES[surface_id]
# Create an OpenMC Surface to represent this OpenMOC Surface
name = openmoc_surface.getName()
# Correct for OpenMC's syntax for Surfaces dividing Cells
boundary = openmoc_surface.getBoundaryType()
if boundary == openmoc.VACUUM:
boundary = 'vacuum'
elif boundary == openmoc.REFLECTIVE:
boundary = 'reflective'
elif boundary == openmoc.PERIODIC:
boundary = 'periodic'
else:
boundary = 'transmission'
if openmoc_surface.getSurfaceType() == openmoc.PLANE:
openmoc_surface = openmoc.castSurfaceToPlane(openmoc_surface)
A = openmoc_surface.getA()
B = openmoc_surface.getB()
C = openmoc_surface.getC()
D = openmoc_surface.getD()
# OpenMOC uses the opposite sign on D
openmc_surface = openmc.Plane(surface_id, boundary, A, B, C, -D, name)
elif openmoc_surface.getSurfaceType() == openmoc.XPLANE:
openmoc_surface = openmoc.castSurfaceToXPlane(openmoc_surface)
x0 = openmoc_surface.getX()
openmc_surface = openmc.XPlane(surface_id, boundary, x0, name)
elif openmoc_surface.getSurfaceType() == openmoc.YPLANE:
openmoc_surface = openmoc.castSurfaceToYPlane(openmoc_surface)
y0 = openmoc_surface.getY()
openmc_surface = openmc.YPlane(surface_id, boundary, y0, name)
elif openmoc_surface.getSurfaceType() == openmoc.ZPLANE:
openmoc_surface = openmoc.castSurfaceToZPlane(openmoc_surface)
z0 = openmoc_surface.getZ()
openmc_surface = openmc.ZPlane(surface_id, boundary, z0, name)
elif openmoc_surface.getSurfaceType() == openmoc.ZCYLINDER:
openmoc_surface = openmoc.castSurfaceToZCylinder(openmoc_surface)
x0 = openmoc_surface.getX0()
y0 = openmoc_surface.getY0()
R = openmoc_surface.getRadius()
openmc_surface = openmc.ZCylinder(surface_id, boundary, x0, y0, R, name)
# Add the OpenMC Surface to the global collection of all OpenMC Surfaces
OPENMC_SURFACES[surface_id] = openmc_surface
# Add the OpenMOC Surface to the global collection of all OpenMOC Surfaces
OPENMOC_SURFACES[surface_id] = openmoc_surface
return openmc_surface
def pwr_assembly():
"""Create a PWR assembly model.
This model is a reflected 17x17 fuel assembly from the the `BEAVRS
<http://crpg.mit.edu/research/beavrs>`_ benchmark. The fuel is 2.4 w/o
enriched UO2 corresponding to a beginning-of-cycle condition. Note that the
number of particles/batches is initially set very low for testing purposes.
Returns
-------
model : openmc.model.Model
A PWR assembly model
"""
model = openmc.model.Model()
# Define materials.
fuel = openmc.Material(name='Fuel')
fuel.set_density('g/cm3', 10.29769)
fuel.add_nuclide("U234", 4.4843e-6)
fuel.add_nuclide("U235", 5.5815e-4)
fuel.add_nuclide("U238", 2.2408e-2)
fuel.add_nuclide("O16", 4.5829e-2)
clad = openmc.Material(name='Cladding')
clad.set_density('g/cm3', 6.55)
clad.add_nuclide("Zr90", 2.1827e-2)
clad.add_nuclide("Zr91", 4.7600e-3)
clad.add_nuclide("Zr92", 7.2758e-3)
clad.add_nuclide("Zr94", 7.3734e-3)
clad.add_nuclide("Zr96", 1.1879e-3)
hot_water = openmc.Material(name='Hot borated water')
hot_water.set_density('g/cm3', 0.740582)
hot_water.add_nuclide("H1", 4.9457e-2)
hot_water.add_nuclide("O16", 2.4672e-2)
hot_water.add_nuclide("B10", 8.0042e-6)
hot_water.add_nuclide("B11", 3.2218e-5)
hot_water.add_s_alpha_beta('c_H_in_H2O')
# Define the materials file.
model.materials = (fuel, clad, hot_water)
# Instantiate ZCylinder surfaces
fuel_or = openmc.ZCylinder(x0=0, y0=0, R=0.39218, name='Fuel OR')
clad_or = openmc.ZCylinder(x0=0, y0=0, R=0.45720, name='Clad OR')
# Create boundary planes to surround the geometry
pitch = 21.42
min_x = openmc.XPlane(x0=-pitch/2, boundary_type='reflective')
max_x = openmc.XPlane(x0=+pitch/2, boundary_type='reflective')
min_y = openmc.YPlane(y0=-pitch/2, boundary_type='reflective')
max_y = openmc.YPlane(y0=+pitch/2, boundary_type='reflective')
# Create a fuel pin universe
fuel_pin_universe = openmc.Universe(name='Fuel Pin')
fuel_cell = openmc.Cell(name='fuel', fill=fuel, region=-fuel_or)
clad_cell = openmc.Cell(name='clad', fill=clad, region=+fuel_or & -clad_or)
hot_water_cell = openmc.Cell(name='hot water', fill=hot_water, region=+clad_or)
fuel_pin_universe.add_cells([fuel_cell, clad_cell, hot_water_cell])
# Create a control rod guide tube universe
guide_tube_universe = openmc.Universe(name='Guide Tube')
gt_inner_cell = openmc.Cell(name='guide tube inner water', fill=hot_water,
region=-fuel_or)
gt_clad_cell = openmc.Cell(name='guide tube clad', fill=clad,
region=+fuel_or & -clad_or)
gt_outer_cell = openmc.Cell(name='guide tube outer water', fill=hot_water,
region=+clad_or)
guide_tube_universe.add_cells([gt_inner_cell, gt_clad_cell, gt_outer_cell])
# Create fuel assembly Lattice
assembly = openmc.RectLattice(name='Fuel Assembly')
assembly.pitch = (pitch/17, pitch/17)
assembly.lower_left = (-pitch/2, -pitch/2)
# Create array indices for guide tube locations in lattice
template_x = np.array([5, 8, 11, 3, 13, 2, 5, 8, 11, 14, 2, 5, 8,
11, 14, 2, 5, 8, 11, 14, 3, 13, 5, 8, 11])
template_y = np.array([2, 2, 2, 3, 3, 5, 5, 5, 5, 5, 8, 8, 8, 8,
8, 11, 11, 11, 11, 11, 13, 13, 14, 14, 14])
# Create 17x17 array of universes
assembly.universes = np.tile(fuel_pin_universe, (17, 17))
assembly.universes[template_x, template_y] = guide_tube_universe
# Create root Cell
root_cell = openmc.Cell(name='root cell', fill=assembly)
root_cell.region = +min_x & -max_x & +min_y & -max_y
# Create root Universe
model.geometry.root_universe = openmc.Universe(name='root universe')
model.geometry.root_universe.add_cell(root_cell)
model.settings.batches = 10
model.settings.inactive = 5
model.settings.particles = 100
model.settings.source = openmc.Source(space=openmc.stats.Box(
[-pitch/2, -pitch/2, -1], [pitch/2, pitch/2, 1], only_fissionable=True))
plot = openmc.Plot()
plot.origin = (0.0, 0.0, 0)
plot.width = (21.42, 21.42)
plot.pixels = (300, 300)
plot.color_by = 'material'
model.plots.append(plot)
return model
#fuel cylinder zc1 = openmc.ZCylinder(x0=0, y0=0, R=0.5588) zc2 = openmc.ZCylinder(x0=0, y0=0, R=0.635) zp7 = openmc.ZPlane(z0=0.0) zp8 = openmc.ZPlane(z0=91.44) zp9 = openmc.ZPlane(z0=91.92) #top 0f clad xp10 = openmc.XPlane(x0=38.608) xp11 = openmc.XPlane(x0=0.0) xp15 = openmc.XPlane(x0=51.708) xp14 = openmc.XPlane(x0=90.316) xp17 = openmc.XPlane(x0=103.416) xp16 = openmc.XPlane(x0=142.024) yp20 = openmc.YPlane(y0=32.512) yp21 = openmc.YPlane(y0=0.0) zp22 = openmc.ZPlane(z0=96.52) zp23 = openmc.ZPlane(z0=-1.27) #side of water reflector xp24 = openmc.XPlane(x0=183.512, boundary_type='vacuum') xp25 = openmc.XPlane(x0=-41.488, boundary_type='vacuum') yp26 = openmc.YPlane(y0=63.012, boundary_type='vacuum') yp27 = openmc.YPlane(y0=-30.5, boundary_type='vacuum') zp28 = openmc.ZPlane(z0=111.72, boundary_type='vacuum') #top of water zp29 = openmc.ZPlane(z0=-3.81) yp31 = openmc.YPlane(y0=-10.2) yp32 = openmc.YPlane(y0=42.712) xp33 = openmc.XPlane(x0=-10.988)
def pwr_pin_cell():
"""Create a PWR pin-cell model.
This model is a single fuel pin with 2.4 w/o enriched UO2 corresponding to a
beginning-of-cycle condition and borated water. The specifications are from
the `BEAVRS <http://crpg.mit.edu/research/beavrs>`_ benchmark. Note that the
number of particles/batches is initially set very low for testing purposes.
Returns
-------
model : openmc.model.Model
A PWR pin-cell model
"""
model = openmc.model.Model()
# Define materials.
fuel = openmc.Material(name='UO2 (2.4%)')
fuel.set_density('g/cm3', 10.29769)
fuel.add_nuclide("U234", 4.4843e-6)
fuel.add_nuclide("U235", 5.5815e-4)
fuel.add_nuclide("U238", 2.2408e-2)
fuel.add_nuclide("O16", 4.5829e-2)
clad = openmc.Material(name='Zircaloy')
clad.set_density('g/cm3', 6.55)
clad.add_nuclide("Zr90", 2.1827e-2)
clad.add_nuclide("Zr91", 4.7600e-3)
clad.add_nuclide("Zr92", 7.2758e-3)
clad.add_nuclide("Zr94", 7.3734e-3)
clad.add_nuclide("Zr96", 1.1879e-3)
hot_water = openmc.Material(name='Hot borated water')
hot_water.set_density('g/cm3', 0.740582)
hot_water.add_nuclide("H1", 4.9457e-2)
hot_water.add_nuclide("O16", 2.4672e-2)
hot_water.add_nuclide("B10", 8.0042e-6)
hot_water.add_nuclide("B11", 3.2218e-5)
hot_water.add_s_alpha_beta('c_H_in_H2O')
# Define the materials file.
model.materials = (fuel, clad, hot_water)
# Instantiate ZCylinder surfaces
pitch = 1.26
fuel_or = openmc.ZCylinder(x0=0, y0=0, R=0.39218, name='Fuel OR')
clad_or = openmc.ZCylinder(x0=0, y0=0, R=0.45720, name='Clad OR')
left = openmc.XPlane(x0=-pitch/2, name='left', boundary_type='reflective')
right = openmc.XPlane(x0=pitch/2, name='right', boundary_type='reflective')
bottom = openmc.YPlane(y0=-pitch/2, name='bottom',
boundary_type='reflective')
top = openmc.YPlane(y0=pitch/2, name='top', boundary_type='reflective')
# Instantiate Cells
fuel_pin = openmc.Cell(name='Fuel', fill=fuel)
cladding = openmc.Cell(name='Cladding', fill=clad)
water = openmc.Cell(name='Water', fill=hot_water)
# Use surface half-spaces to define regions
fuel_pin.region = -fuel_or
cladding.region = +fuel_or & -clad_or
water.region = +clad_or & +left & -right & +bottom & -top
# Create root universe
model.geometry.root_universe = openmc.Universe(0, name='root universe')
model.geometry.root_universe.add_cells([fuel_pin, cladding, water])
model.settings.batches = 10
model.settings.inactive = 5
model.settings.particles = 100
model.settings.source = openmc.Source(space=openmc.stats.Box(
[-pitch/2, -pitch/2, -1], [pitch/2, pitch/2, 1], only_fissionable=True))
plot = openmc.Plot.from_geometry(model.geometry)
plot.pixels = (300, 300)
plot.color_by = 'material'
model.plots.append(plot)
return model
###############################################################################
# Geometry
# Instantiate zCylinder surfaces
fuel_or = openmc.ZCylinder(r=0.4096, name='Fuel OR')
clad_ir = openmc.ZCylinder(r=0.4180, name='Clad IR')
clad_or = openmc.ZCylinder(r=0.4750, name='Clad OR')
gt_ir = openmc.ZCylinder(r=0.5610, name='Guide Tube IR')
gt_or = openmc.ZCylinder(r=0.6020, name='Guide Tube OR')
aic_ir = openmc.ZCylinder(r=0.3820, name='AIC Radius')
aic_clad_ir = openmc.ZCylinder(r=0.3860, name='AIC Clad IR')
aic_clad_or = openmc.ZCylinder(r=0.4840, name='AIC Clad OR')
assembly_left = openmc.XPlane(x0=-10.75, boundary_type='reflective')
assembly_right = openmc.XPlane(x0=10.75, boundary_type='reflective')
assembly_back = openmc.YPlane(y0=-10.75, boundary_type='reflective')
assembly_front = openmc.YPlane(y0=10.75, boundary_type='reflective')
assembly_bottom = openmc.ZPlane(z0=-200.0, boundary_type='reflective')
assembly_top = openmc.ZPlane(z0=200.0, boundary_type='reflective')
lattice_left = openmc.XPlane(x0=-10.71)
lattice_right = openmc.XPlane(x0=10.71)
lattice_back = openmc.YPlane(y0=-10.71)
lattice_front = openmc.YPlane(y0=10.71)
lattice_bottom = openmc.ZPlane(z0=-200.0)
lattice_top = openmc.ZPlane(z0=200.0)
# fuel rod cell with 3.6 w/o
u_fuel = openmc.model.pin([fuel_or, clad_ir, clad_or],
[fuel_31, helium, zirc4, water_600])
def __init__(self, x0=0., y0=0., z0=0., r2=1., up=True, **kwargs):
check_greater_than('cone R^2', r2, 0.0)
self.cone = openmc.YCone(x0, y0, z0, r2, **kwargs)
self.plane = openmc.YPlane(y0)
self.up = up
def generate_geometry():
""" Generates example geometry.
This function creates the initial geometry, a 4 pin reflective problem.
One pin, containing gadolinium, is discretized into 5 radial cells of
equal volume. Reflections go through the center of this pin.
In addition to what one would do with the general OpenMC geometry code, it
is necessary to create a dictionary, volume, that maps a cell ID to a
volume. Further, by naming cells the same as the above materials, the code
can automatically handle the mapping.
"""
import math
import numpy as np
pitch = 1.2600
r_fuel = 0.4096
r_gap = 0.4180
r_clad = 0.4750
n_rings = 1
# Calculate all the volumes of interest ahead of time
v_fuel = math.pi * r_fuel**2
v_gap = math.pi * r_gap**2 - v_fuel
v_clad = math.pi * r_clad**2 - v_fuel - v_gap
v_ring = v_fuel / n_rings
# Form dictionaries for later use.
volume = OrderedDict()
# Calculate pin discretization radii
r_rings = np.zeros(n_rings)
# Remaining rings
for i in range(n_rings):
r_rings[i] = math.sqrt(1.0 / (math.pi) * v_ring * (i + 1))
# Form bounding box
left = openmc.XPlane(x0=-3.0 / 2.0 * pitch, name='left')
right = openmc.XPlane(x0=3.0 / 2.0 * pitch, name='right')
bottom = openmc.YPlane(y0=-3.0 / 2.0 * pitch, name='bottom')
top = openmc.YPlane(y0=3.0 / 2.0 * pitch, name='top')
left.boundary_type = 'reflective'
right.boundary_type = 'reflective'
top.boundary_type = 'reflective'
bottom.boundary_type = 'reflective'
# ----------------------------------------------------------------------
# Fill pin 1 (the one with gadolinium)
gd_fuel_r = [
openmc.ZCylinder(x0=0, y0=0, R=r_rings[i]) for i in range(n_rings)
]
gd_clad_ir = openmc.ZCylinder(x0=0, y0=0, R=r_gap)
gd_clad_or = openmc.ZCylinder(x0=0, y0=0, R=r_clad)
gd_fuel_cell = openmc.Cell(name='fuel_gd')
gd_fuel_cell.region = -gd_fuel_r[0]
volume[gd_fuel_cell.id] = v_ring
# Gap
gd_fuel_gap = openmc.Cell(name='gap')
gd_fuel_gap.region = +gd_fuel_r[n_rings - 1] & -gd_clad_ir
volume[gd_fuel_gap.id] = v_gap
# Clad
gd_fuel_clad = openmc.Cell(name='clad')
gd_fuel_clad.region = +gd_clad_ir & -gd_clad_or
volume[gd_fuel_clad.id] = v_clad
# ----------------------------------------------------------------------
# Fill pin 2, 3 and 4 (without gadolinium)
coords = [[pitch, 0], [pitch, pitch], [0, pitch], [-pitch, pitch],
[-pitch, 0], [-pitch, -pitch], [0, -pitch], [pitch, -pitch]]
fuel_s = []
clad_ir_s = []
clad_or_s = []
fuel_cell = []
clad_cell = []
gap_cell = []
ind = 0
for x in coords:
fuel_s.append(openmc.ZCylinder(x0=x[0], y0=x[1], R=r_fuel))
clad_ir_s.append(openmc.ZCylinder(x0=x[0], y0=x[1], R=r_gap))
clad_or_s.append(openmc.ZCylinder(x0=x[0], y0=x[1], R=r_clad))
fs = openmc.Cell(name='fuel')
cs = openmc.Cell(name='clad')
gs = openmc.Cell(name='gap')
fs.region = -fuel_s[ind]
gs.region = +fuel_s[ind] & -clad_ir_s[ind]
cs.region = +clad_ir_s[ind] & -clad_or_s[ind]
volume[fs.id] = v_fuel
volume[cs.id] = v_clad
volume[gs.id] = v_gap
fuel_cell.append(fs)
clad_cell.append(cs)
gap_cell.append(gs)
ind += 1
# ----------------------------------------------------------------------
# Fill coolant
cool_cell = openmc.Cell(name='cool')
cool_cell.region = +clad_or_s[0] & +clad_or_s[1] & +clad_or_s[2] &\
+clad_or_s[3] & +clad_or_s[4] & +clad_or_s[5] &\
+clad_or_s[6] & +clad_or_s[7] &\
+gd_clad_or & +left & -right & +bottom & -top
volume[cool_cell.id] = (3 * pitch)**2 - 9 * v_fuel - \
9 * v_gap - 9 * v_clad
# ----------------------------------------------------------------------
# Finalize geometry
root = openmc.Universe(universe_id=0, name='root universe')
root.add_cells([cool_cell] + clad_cell + gap_cell + fuel_cell +
[gd_fuel_cell] + [gd_fuel_clad] + [gd_fuel_gap])
geometry = openmc.Geometry()
geometry.root_universe = root
return geometry, volume
iron.add_nuclide(fe56, 1.) # Instantiate a MaterialsFile, register all Materials, and export to XML materials_file = openmc.MaterialsFile() materials_file.default_xs = '71c' materials_file.add_materials([moderator, fuel, iron]) materials_file.export_to_xml() ############################################################################### # Exporting to OpenMC geometry.xml File ############################################################################### # Instantiate Surfaces left = openmc.XPlane(surface_id=1, x0=-3, name='left') right = openmc.XPlane(surface_id=2, x0=3, name='right') bottom = openmc.YPlane(surface_id=3, y0=-4, name='bottom') top = openmc.YPlane(surface_id=4, y0=4, name='top') fuel_surf = openmc.ZCylinder(surface_id=5, x0=0, y0=0, R=0.4) left.boundary_type = 'vacuum' right.boundary_type = 'vacuum' top.boundary_type = 'vacuum' bottom.boundary_type = 'vacuum' # Instantiate Cells cell1 = openmc.Cell(cell_id=1, name='Cell 1') cell2 = openmc.Cell(cell_id=101, name='cell 2') cell3 = openmc.Cell(cell_id=102, name='cell 3') cell4 = openmc.Cell(cell_id=500, name='cell 4') cell5 = openmc.Cell(cell_id=600, name='cell 5') cell6 = openmc.Cell(cell_id=601, name='cell 6')
zc2 = openmc.ZCylinder(x0=0, y0=0, R=0.6415) zp7 = openmc.ZPlane(z0=0.0) zp8 = openmc.ZPlane(z0=92.075) zp9 = openmc.ZPlane(z0=94.2975) #top 0f clad xp10 = openmc.XPlane(x0=33.02) xp11 = openmc.XPlane(x0=0.0) zc12 = openmc.ZCylinder(x0=0, y0=0, R=0.7075) #clad outer surface xp14 = openmc.XPlane(x0=85.535) xp15 = openmc.XPlane(x0=52.515) xp16 = openmc.XPlane(x0=138.05) xp17 = openmc.XPlane(x0=105.03) yp19 = openmc.YPlane(y0=0.0) yp20 = openmc.YPlane(y0=20.32) zp23 = openmc.ZPlane(z0=-2.2225) #side of water reflector xp24 = openmc.XPlane(x0=181.525, boundary_type='vacuum') xp25 = openmc.XPlane(x0=-43.475, boundary_type='vacuum') yp26 = openmc.YPlane(y0=50.82, boundary_type='vacuum') yp27 = openmc.YPlane(y0=-30.5, boundary_type='vacuum') zp28 = openmc.ZPlane(z0=109.4975, boundary_type='vacuum') #top of water zp35 = openmc.ZPlane(z0=-20.0625, boundary_type='vacuum') #bottom of lead ##lead pb zp29 = openmc.ZPlane(z0=-4.7625) #bottom of acrylic support plate
