def test_simul_coloring_example(self):
from openmdao.api import Problem, IndepVarComp, ExecComp, ScipyOptimizeDriver
import numpy as np
# note: size must be an even number
SIZE = 10
p = Problem()
indeps = p.model.add_subsystem('indeps', IndepVarComp(), promotes_outputs=['*'])
# the following were randomly generated using np.random.random(10)*2-1 to randomly
# disperse them within a unit circle centered at the origin.
indeps.add_output('x', np.array([ 0.55994437, -0.95923447, 0.21798656, -0.02158783, 0.62183717,
0.04007379, 0.46044942, -0.10129622, 0.27720413, -0.37107886]))
indeps.add_output('y', np.array([ 0.52577864, 0.30894559, 0.8420792 , 0.35039912, -0.67290778,
-0.86236787, -0.97500023, 0.47739414, 0.51174103, 0.10052582]))
indeps.add_output('r', .7)
p.model.add_subsystem('circle', ExecComp('area=pi*r**2'))
p.model.add_subsystem('r_con', ExecComp('g=x**2 + y**2 - r',
g=np.ones(SIZE), x=np.ones(SIZE), y=np.ones(SIZE)))
thetas = np.linspace(0, np.pi/4, SIZE)
p.model.add_subsystem('theta_con', ExecComp('g=arctan(y/x) - theta',
g=np.ones(SIZE), x=np.ones(SIZE), y=np.ones(SIZE),
theta=thetas))
p.model.add_subsystem('delta_theta_con', ExecComp('g = arctan(y/x)[::2]-arctan(y/x)[1::2]',
g=np.ones(SIZE//2), x=np.ones(SIZE),
y=np.ones(SIZE)))
thetas = np.linspace(0, np.pi/4, SIZE)
p.model.add_subsystem('l_conx', ExecComp('g=x-1', g=np.ones(SIZE), x=np.ones(SIZE)))
p.model.connect('r', ('circle.r', 'r_con.r'))
p.model.connect('x', ['r_con.x', 'theta_con.x', 'delta_theta_con.x'])
p.model.connect('x', 'l_conx.x')
p.model.connect('y', ['r_con.y', 'theta_con.y', 'delta_theta_con.y'])
p.driver = ScipyOptimizeDriver()
p.driver.options['optimizer'] = 'SLSQP'
p.driver.options['disp'] = False
p.model.add_design_var('x')
p.model.add_design_var('y')
p.model.add_design_var('r', lower=.5, upper=10)
# nonlinear constraints
p.model.add_constraint('r_con.g', equals=0)
IND = np.arange(SIZE, dtype=int)
ODD_IND = IND[0::2] # all odd indices
p.model.add_constraint('theta_con.g', lower=-1e-5, upper=1e-5, indices=ODD_IND)
p.model.add_constraint('delta_theta_con.g', lower=-1e-5, upper=1e-5)
# this constrains x[0] to be 1 (see definition of l_conx)
p.model.add_constraint('l_conx.g', equals=0, linear=False, indices=[0,])
# linear constraint
p.model.add_constraint('y', equals=0, indices=[0,], linear=True)
p.model.add_objective('circle.area', ref=-1)
# setup coloring
color_info = ([
[20], # uncolored column list
[0, 2, 4, 6, 8], # color 1
[1, 3, 5, 7, 9], # color 2
[10, 12, 14, 16, 18], # color 3
[11, 13, 15, 17, 19], # color 4
],
[
[1, 11, 16, 21], # column 0
[2, 16], # column 1
[3, 12, 17], # column 2
[4, 17], # column 3
[5, 13, 18], # column 4
[6, 18], # column 5
[7, 14, 19], # column 6
[8, 19], # column 7
[9, 15, 20], # column 8
[10, 20], # column 9
[1, 11, 16], # column 10
[2, 16], # column 11
[3, 12, 17], # column 12
[4, 17], # column 13
[5, 13, 18], # column 14
[6, 18], # column 15
[7, 14, 19], # column 16
[8, 19], # column 17
[9, 15, 20], # column 18
[10, 20], # column 19
None, # column 20
], None)
p.driver.set_simul_deriv_color(color_info)
p.setup(mode='fwd')
p.run_driver()
assert_almost_equal(p['circle.area'], np.pi, decimal=7)
def test_dv_at_apogee(self):
from openmdao.api import Problem, Group, IndepVarComp, ExecComp, ScipyOptimizeDriver
from openmdao.test_suite.test_examples.test_hohmann_transfer import VCircComp, TransferOrbitComp, DeltaVComp
prob = Problem(model=Group())
model = prob.model
ivc = model.add_subsystem('ivc',
IndepVarComp(),
promotes_outputs=['*'])
ivc.add_output('mu', val=0.0, units='km**3/s**2')
ivc.add_output('r1', val=0.0, units='km')
ivc.add_output('r2', val=0.0, units='km')
ivc.add_output('dinc1', val=0.0, units='deg')
ivc.add_output('dinc2', val=0.0, units='deg')
model.add_subsystem('leo', subsys=VCircComp())
model.add_subsystem('geo', subsys=VCircComp())
model.add_subsystem('transfer', subsys=TransferOrbitComp())
model.connect('r1', ['leo.r', 'transfer.rp'])
model.connect('r2', ['geo.r', 'transfer.ra'])
model.connect('mu', ['leo.mu', 'geo.mu', 'transfer.mu'])
model.add_subsystem('dv1', subsys=DeltaVComp())
model.connect('leo.vcirc', 'dv1.v1')
model.connect('transfer.vp', 'dv1.v2')
model.connect('dinc1', 'dv1.dinc')
model.add_subsystem('dv2', subsys=DeltaVComp())
model.connect('transfer.va', 'dv2.v1')
model.connect('geo.vcirc', 'dv2.v2')
model.connect('dinc2', 'dv2.dinc')
model.add_subsystem('dv_total',
subsys=ExecComp('delta_v=dv1+dv2',
delta_v={'units': 'km/s'},
dv1={'units': 'km/s'},
dv2={'units': 'km/s'}),
promotes=['delta_v'])
model.connect('dv1.delta_v', 'dv_total.dv1')
model.connect('dv2.delta_v', 'dv_total.dv2')
model.add_subsystem('dinc_total',
subsys=ExecComp('dinc=dinc1+dinc2',
dinc={'units': 'deg'},
dinc1={'units': 'deg'},
dinc2={'units': 'deg'}),
promotes=['dinc'])
model.connect('dinc1', 'dinc_total.dinc1')
model.connect('dinc2', 'dinc_total.dinc2')
prob.driver = ScipyOptimizeDriver()
model.add_design_var('dinc1', lower=0, upper=28.5)
model.add_design_var('dinc2', lower=0, upper=28.5)
model.add_constraint('dinc', lower=28.5, upper=28.5, scaler=1.0)
model.add_objective('delta_v', scaler=1.0)
# Setup the problem
prob.setup()
prob['mu'] = 398600.4418
prob['r1'] = 6778.137
prob['r2'] = 42164.0
prob['dinc1'] = 0
prob['dinc2'] = 28.5
# Execute the model with the given inputs
prob.run_model()
print('Delta-V (km/s):', prob['delta_v'][0])
print('Inclination change split (deg):', prob['dinc1'][0],
prob['dinc2'][0])
prob.run_driver()
print('Optimized Delta-V (km/s):', prob['delta_v'][0])
print('Inclination change split (deg):', prob['dinc1'][0],
prob['dinc2'][0])
def test(self):
"""
This is an opt problem that tests the fuel volume constraint with the wingbox model
"""
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 7,
'num_x': 2,
'wing_type': 'CRM',
'symmetry': True,
'num_twist_cp': 6,
'chord_cos_spacing': 0,
'span_cos_spacing': 0,
}
mesh, twist_cp = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name':
'wing', # name of the surface
'symmetry':
True, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type':
'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type':
'wingbox',
'spar_thickness_cp':
np.array([0.004, 0.005, 0.005, 0.008, 0.008, 0.01]), # [m]
'skin_thickness_cp':
np.array([0.005, 0.01, 0.015, 0.020, 0.025, 0.026]),
'twist_cp':
np.array([4., 5., 8., 8., 8., 9.]),
'mesh':
mesh,
'data_x_upper':
upper_x,
'data_x_lower':
lower_x,
'data_y_upper':
upper_y,
'data_y_lower':
lower_y,
'strength_factor_for_upper_skin':
1.,
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0':
0.0, # CL of the surface at alpha=0
'CD0':
0.0078, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam':
0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp':
np.array([0.08, 0.08, 0.08, 0.10, 0.10, 0.08]),
'original_wingbox_airfoil_t_over_c':
0.12,
'c_max_t':
.38, # chordwise location of maximum thickness
'with_viscous':
True,
'with_wave':
False, # if true, compute wave drag
# Structural values are based on aluminum 7075
'E':
73.1e9, # [Pa] Young's modulus
'G': (
73.1e9 / 2 / 1.33
), # [Pa] shear modulus (calculated using E and the Poisson's ratio here)
'yield': (420.e6 / 1.5), # [Pa] allowable yield stress
'mrho':
2.78e3, # [kg/m^3] material density
'strength_factor_for_upper_skin':
1.0, # the yield stress is multiplied by this factor for the upper skin
# 'fem_origin' : 0.35, # normalized chordwise location of the spar
'wing_weight_ratio':
1.25,
'struct_weight_relief':
True,
'distributed_fuel_weight':
False,
# Constraints
'exact_failure_constraint':
False, # if false, use KS function
'fuel_density':
803., # [kg/m^3] fuel density (only needed if the fuel-in-wing volume constraint is used)
'Wf_reserve':
15000., # [kg] reserve fuel mass
}
surfaces = [surf_dict]
# Create the problem and assign the model group
prob = Problem()
# Add problem information as an independent variables component
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=.85 * 295.07, units='m/s')
indep_var_comp.add_output('alpha', val=0., units='deg')
indep_var_comp.add_output('Mach_number', val=0.85)
indep_var_comp.add_output('re',
val=0.348 * 295.07 * .85 * 1. /
(1.43 * 1e-5),
units='1/m')
indep_var_comp.add_output('rho', val=0.348, units='kg/m**3')
indep_var_comp.add_output('CT', val=0.53 / 3600, units='1/s')
indep_var_comp.add_output('R', val=14.307e6, units='m')
indep_var_comp.add_output('W0',
val=148000 + surf_dict['Wf_reserve'],
units='kg')
indep_var_comp.add_output('speed_of_sound', val=295.07, units='m/s')
indep_var_comp.add_output('load_factor', val=1.)
indep_var_comp.add_output('empty_cg', val=np.zeros((3)), units='m')
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
# Loop over each surface in the surfaces list
for surface in surfaces:
# Get the surface name and create a group to contain components
# only for this surface
name = surface['name']
aerostruct_group = AerostructGeometry(surface=surface)
# Add tmp_group to the problem with the name of the surface.
prob.model.add_subsystem(name, aerostruct_group)
# Loop through and add a certain number of aero points
for i in range(1):
point_name = 'AS_point_{}'.format(i)
# Connect the parameters within the model for each aero point
# Create the aero point group and add it to the model
AS_point = AerostructPoint(surfaces=surfaces)
prob.model.add_subsystem(point_name, AS_point)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v')
prob.model.connect('alpha', point_name + '.alpha')
prob.model.connect('Mach_number', point_name + '.Mach_number')
prob.model.connect('re', point_name + '.re')
prob.model.connect('rho', point_name + '.rho')
prob.model.connect('CT', point_name + '.CT')
prob.model.connect('R', point_name + '.R')
prob.model.connect('W0', point_name + '.W0')
prob.model.connect('speed_of_sound',
point_name + '.speed_of_sound')
prob.model.connect('empty_cg', point_name + '.empty_cg')
prob.model.connect('load_factor', point_name + '.load_factor')
for surface in surfaces:
com_name = point_name + '.' + name + '_perf.'
prob.model.connect(
name + '.local_stiff_transformed', point_name +
'.coupled.' + name + '.local_stiff_transformed')
prob.model.connect(name + '.nodes',
point_name + '.coupled.' + name + '.nodes')
# Connect aerodyamic mesh to coupled group mesh
prob.model.connect(name + '.mesh',
point_name + '.coupled.' + name + '.mesh')
prob.model.connect(
name + '.element_mass',
point_name + '.coupled.' + name + '.element_mass')
# Connect performance calculation variables
prob.model.connect(name + '.nodes', com_name + 'nodes')
prob.model.connect(
name + '.cg_location',
point_name + '.' + 'total_perf.' + name + '_cg_location')
prob.model.connect(
name + '.structural_mass', point_name + '.' +
'total_perf.' + name + '_structural_mass')
# Connect wingbox properties to von Mises stress calcs
prob.model.connect(name + '.Qz', com_name + 'Qz')
prob.model.connect(name + '.J', com_name + 'J')
prob.model.connect(name + '.A_enc', com_name + 'A_enc')
prob.model.connect(name + '.htop', com_name + 'htop')
prob.model.connect(name + '.hbottom', com_name + 'hbottom')
prob.model.connect(name + '.hfront', com_name + 'hfront')
prob.model.connect(name + '.hrear', com_name + 'hrear')
prob.model.connect(name + '.spar_thickness',
com_name + 'spar_thickness')
prob.model.connect(name + '.t_over_c', com_name + 't_over_c')
#=======================================================================================
# Here we add the fuel volume constraint componenet to the model
#=======================================================================================
prob.model.add_subsystem('fuel_vol_delta',
WingboxFuelVolDelta(surface=surface))
prob.model.connect('AS_point_0.fuelburn',
'fuel_vol_delta.fuelburn')
prob.model.connect('wing.struct_setup.fuel_vols',
'fuel_vol_delta.fuel_vols')
#=======================================================================================
#=======================================================================================
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['tol'] = 1e-9
# from openmdao.api import pyOptSparseDriver
# prob.driver = pyOptSparseDriver()
# # prob.driver.add_recorder(SqliteRecorder("cases.sql"))
# prob.driver.options['optimizer'] = "SNOPT"
# prob.driver.opt_settings['Major optimality tolerance'] = 1e-6
# prob.driver.opt_settings['Major feasibility tolerance'] = 1e-8
# prob.driver.opt_settings['Major iterations limit'] = 200
prob.model.add_objective('AS_point_0.fuelburn', scaler=1e-5)
prob.model.add_design_var('wing.twist_cp',
lower=-15.,
upper=15.,
scaler=0.1)
prob.model.add_design_var('wing.spar_thickness_cp',
lower=0.003,
upper=0.1,
scaler=1e2)
prob.model.add_design_var('wing.skin_thickness_cp',
lower=0.003,
upper=0.1,
scaler=1e2)
prob.model.add_design_var('wing.geometry.t_over_c_cp',
lower=0.07,
upper=0.2,
scaler=10.)
prob.model.add_constraint('AS_point_0.CL', equals=0.5)
prob.model.add_constraint('AS_point_0.wing_perf.failure', upper=0.)
#=======================================================================================
# Here we add the fuel volume constraint
#=======================================================================================
prob.model.add_constraint('fuel_vol_delta.fuel_vol_delta', lower=0.)
#=======================================================================================
#=======================================================================================
# Set up the problem
prob.setup()
# from openmdao.api import view_model
# view_model(prob)
prob.run_driver()
# prob.check_partials(form='central', compact_print=True)
# print(prob['AS_point_0.fuelburn'][0])
# print(prob['wing.structural_mass'][0]/1.25)
assert_rel_error(self, prob['AS_point_0.fuelburn'][0], 83619.581901,
1e-5)
assert_rel_error(self, prob['wing.structural_mass'][0] / 1.25,
13768.9206457, 1e-5)
assert_rel_error(self, prob['fuel_vol_delta.fuel_vol_delta'][0],
39.6491222105, 1e-4)
def test_feature_vectorized_derivs(self):
import numpy as np
from openmdao.api import ExplicitComponent, IndepVarComp, Problem, ScipyOptimizeDriver
SIZE = 5
class ExpensiveAnalysis(ExplicitComponent):
def setup(self):
self.add_input('x', val=np.ones(SIZE))
self.add_input('y', val=np.ones(SIZE))
self.add_output('f', shape=1)
self.declare_partials('f', 'x')
self.declare_partials('f', 'y')
def compute(self, inputs, outputs):
outputs['f'] = np.sum(inputs['x']**inputs['y'])
def compute_partials(self, inputs, J):
J['f', 'x'] = inputs['y'] * inputs['x']**(inputs['y'] - 1)
J['f', 'y'] = (inputs['x']**inputs['y']) * np.log(inputs['x'])
class CheapConstraint(ExplicitComponent):
def setup(self):
self.add_input('y', val=np.ones(SIZE))
self.add_output('g', shape=SIZE)
row_col = np.arange(SIZE, dtype=int)
self.declare_partials('g', 'y', rows=row_col, cols=row_col)
self.limit = 2 * np.arange(SIZE)
def compute(self, inputs, outputs):
outputs['g'] = inputs['y']**2 - self.limit
def compute_partials(self, inputs, J):
J['g', 'y'] = 2 * inputs['y']
p = Problem()
dvs = p.model.add_subsystem('des_vars', IndepVarComp(), promotes=['*'])
dvs.add_output('x', 2 * np.ones(SIZE))
dvs.add_output('y', 2 * np.ones(SIZE))
p.model.add_subsystem('obj',
ExpensiveAnalysis(),
promotes=['x', 'y', 'f'])
p.model.add_subsystem('constraint',
CheapConstraint(),
promotes=['y', 'g'])
p.model.add_design_var('x', lower=.1, upper=10000)
p.model.add_design_var('y', lower=-1000, upper=10000)
p.model.add_constraint('g', upper=0, vectorize_derivs=True)
p.model.add_objective('f')
p.setup(mode='rev')
p.run_model()
p.driver = ScipyOptimizeDriver()
p.run_driver()
assert_rel_error(self, p['x'], [0.10000691, 0.1, 0.1, 0.1, 0.1], 1e-5)
assert_rel_error(self, p['y'], [0, 1.41421, 2.0, 2.44948, 2.82842],
1e-5)
def test(self):
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 5,
'num_x': 3,
'wing_type': 'rect',
'symmetry': True,
'span': 10.,
'chord': 1,
'span_cos_spacing': 0.
}
mesh = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name': 'wing', # name of the surface
'type': 'aero',
'symmetry': True, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type': 'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type': 'tube',
'twist_cp': np.zeros(5),
'mesh': mesh,
'num_x': mesh.shape[0],
'num_y': mesh.shape[1],
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0': 0.0, # CL of the surface at alpha=0
'CD0': 0.0, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam': 0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp':
np.array([0.15]), # thickness over chord ratio (NACA0015)
'c_max_t': .303, # chordwise location of maximum (NACA0015)
# thickness
'with_viscous': False, # if true, compute viscous drag
'with_wave': False, # if true, compute wave drag
}
surfaces = [surf_dict]
# Create the problem and the model group
prob = Problem()
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=248.136, units='m/s')
indep_var_comp.add_output('alpha', val=5., units='deg')
indep_var_comp.add_output('M', val=0.84)
indep_var_comp.add_output('re', val=1.e6, units='1/m')
indep_var_comp.add_output('rho', val=0.38, units='kg/m**3')
indep_var_comp.add_output('cg', val=np.zeros((3)), units='m')
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
# Loop over each surface in the surfaces list
for surface in surfaces:
geom_group = Geometry(surface=surface)
# Add tmp_group to the problem as the name of the surface.
# Note that is a group and performance group for each
# individual surface.
prob.model.add_subsystem(surface['name'], geom_group)
# Loop through and add a certain number of aero points
for i in range(1):
# Create the aero point group and add it to the model
aero_group = AeroPoint(surfaces=surfaces)
point_name = 'aero_point_{}'.format(i)
prob.model.add_subsystem(point_name, aero_group)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v')
prob.model.connect('alpha', point_name + '.alpha')
prob.model.connect('M', point_name + '.M')
prob.model.connect('re', point_name + '.re')
prob.model.connect('rho', point_name + '.rho')
prob.model.connect('cg', point_name + '.cg')
# Connect the parameters within the model for each aero point
for surface in surfaces:
name = surface['name']
# Connect the mesh from the geometry component to the analysis point
prob.model.connect(name + '.mesh',
point_name + '.' + name + '.def_mesh')
# Perform the connections with the modified names within the
# 'aero_states' group.
prob.model.connect(
name + '.mesh',
point_name + '.aero_states.' + name + '_def_mesh')
prob.model.connect(
name + '.t_over_c',
point_name + '.' + name + '_perf.' + 't_over_c')
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
# # Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.twist_cp', lower=-10., upper=15.)
prob.model.add_constraint(point_name + '.wing_perf.CL', equals=0.5)
prob.model.add_objective(point_name + '.wing_perf.CD', scaler=1e4)
# Set up the problem
prob.setup()
prob.run_model()
assert_rel_error(self, prob['aero_point_0.wing_perf.CL'][0],
.46173591841167, 1e-6)
assert_rel_error(self, prob['aero_point_0.wing_perf.CD'][0],
.005524603647, 1e-6)
def test_recording_remote_voi(self):
# Create a parallel model
model = Group()
model.add_subsystem('par', ParallelGroup())
model.par.add_subsystem('G1', Mygroup())
model.par.add_subsystem('G2', Mygroup())
model.connect('par.G1.y', 'Obj.y1')
model.connect('par.G2.y', 'Obj.y2')
model.add_subsystem('Obj', ExecComp('obj=y1+y2'))
model.add_objective('Obj.obj')
# Configure driver to record VOIs on both procs
driver = ScipyOptimizeDriver(disp=False)
driver.recording_options['record_desvars'] = True
driver.recording_options['record_objectives'] = True
driver.recording_options['record_constraints'] = True
driver.recording_options['includes'] = ['par.G1.y', 'par.G2.y']
driver.add_recorder(self.recorder)
# Create problem and run driver
prob = Problem(model, driver)
prob.add_recorder(self.recorder)
prob.setup(mode='fwd')
t0, t1 = run_driver(prob)
prob.record('final')
t2 = time()
prob.cleanup()
# Since the test will compare the last case recorded, just check the
# current values in the problem. This next section is about getting those values
# These involve collective gathers so all ranks need to run this
expected_outputs = driver.get_design_var_values()
expected_outputs.update(driver.get_objective_values())
expected_outputs.update(driver.get_constraint_values())
# includes for outputs are specified as promoted names but we need absolute names
prom2abs = model._var_allprocs_prom2abs_list['output']
abs_includes = [
prom2abs[n][0] for n in prob.driver.recording_options['includes']
]
# Absolute path names of includes on this rank
rrank = model.comm.rank
rowned = model._owning_rank
local_includes = [n for n in abs_includes if rrank == rowned[n]]
# Get values for all vars on this rank
inputs, outputs, residuals = model.get_nonlinear_vectors()
# Get values for includes on this rank
local_vars = {n: outputs[n] for n in local_includes}
# Gather values for includes on all ranks
all_vars = model.comm.gather(local_vars, root=0)
if prob.comm.rank == 0:
# Only on rank 0 do we have all the values. The all_vars variable is a list of
# dicts from all ranks 0,1,... In this case, just ranks 0 and 1
dct = {}
for d in all_vars:
dct.update(d)
expected_includes = {
'par.G1.Cy.y': dct['par.G1.Cy.y'],
'par.G2.Cy.y': dct['par.G2.Cy.y'],
}
expected_outputs.update(expected_includes)
coordinate = [0, 'ScipyOptimize_SLSQP', (driver.iter_count - 1, )]
expected_data = ((coordinate, (t0, t1), expected_outputs, None,
None), )
assertDriverIterDataRecorded(self, expected_data, self.eps)
expected_data = (('final', (t1, t2), expected_outputs), )
assertProblemDataRecorded(self, expected_data, self.eps)
def fctOptim(mrhoi, skin, spar, span, toverc):
# Starting time
starttime = time.time()
# Materials
#sandw1=material(66.35,4.25e9,1.63e9,58.7e6/1.5,34.7,"sandw1")
#sandw2=material(174.5,14.15e9,5.44e9,195.6e6/1.5,43.4,"sandw2")
#sandw3=material(483,42.5e9,16.3e9,586e6/1.5,46.8,"sandw3")
sandw4 = material(504.5, 42.5e9, 16.3e9, 586e6 / 1.5, 44.9, "sandw4")
#sandw5=material(574.5,42.5e9,16.3e9,586e6/1.5,39.3,"sandw5")
sandw5 = material(560.5, 42.5e9, 16.3e9, 586e6 / 1.5, 40.3, "sandw5")
sandw6 = material(529, 42.5e9, 16.3e9, 237e6 / 1.5, 42.75, "sandw6")
al7075 = material(2.80e3, 72.5e9, 27e9, 444.5e6 / 1.5,
13.15 * (1 - 0.426) + 2.61 * 0.426,
"al7075") #from EDUPACK
#al7075oas=material(2.78e3,73.1e9,73.1e9/2/1.33,444.5e6/1.5,13.15*(1-0.426)+2.61*0.426,"al7075") #from OAS example
qiCFRP = material(1565, 54.9e9, 21e9, 670e6 / 1.5, 48.1, "qiCFRP")
steel = material(7750, 200e9, 78.5e9, 562e6 / 1.5,
4.55 * (1 - 0.374) + 1.15 * 0.374, "steel")
gfrp = material(1860, 21.4e9, 8.14e9, 255e6, 6.18,
"gfrp") #epoxy-Eglass,woven,QI
#nomat=material(1370,0.01,0.01,0.01,60,"noMaterial")
nomat = material(50, 1e8, 1e4, 1e5, 6000, "noMaterial")
#nomat=material(50,1e8,1e4,1e5,60,"noMaterial")
fakemat = material((2.80e3 + 7750) / 2, (72.5e9 + 200e9) / 2,
(27e9 + 78.5e9) / 2, (444.5e6 / 1.5 + 562e6 / 1.5) / 2,
(13.15 * (1 - 0.426) + 2.61 * 0.426 + 4.55 *
(1 - 0.374) + 1.15 * 0.374) / 2, "fakemat")
nomatEnd = material(10000, 5e9, 2e9, 20e6 / 1.5, 60, "nomatEnd")
materials = [
al7075, qiCFRP, steel, gfrp, nomat, fakemat, nomatEnd, sandw4, sandw5,
sandw6
]
# materials=[al7075, qiCFRP, steel, gfrp, nomat, fakemat, nomatEnd, sandw3, sandw4, sandw5, sandw6]
# materials=[al7075, qiCFRP, steel, gfrp, nomat, fakemat, nomatEnd,sandw1,sandw2,sandw3]
# materials=[sandw4, sandw5, nomat, nomatEnd]
# Provide coordinates for a portion of an airfoil for the wingbox cross-section as an nparray with dtype=complex (to work with the complex-step approximation for derivatives).
# These should be for an airfoil with the chord scaled to 1.
# We use the 10% to 60% portion of the NACA 63412 airfoil for this case
# We use the coordinates available from airfoiltools.com. Using such a large number of coordinates is not necessary.
# The first and last x-coordinates of the upper and lower surfaces must be the same
upper_x = np.array([
0.1, 0.11, 0.12, 0.13, 0.14, 0.15, 0.16, 0.17, 0.18, 0.19, 0.2, 0.21,
0.22, 0.23, 0.24, 0.25, 0.26, 0.27, 0.28, 0.29, 0.3, 0.31, 0.32, 0.33,
0.34, 0.35, 0.36, 0.37, 0.38, 0.39, 0.4, 0.41, 0.42, 0.43, 0.44, 0.45,
0.46, 0.47, 0.48, 0.49, 0.5, 0.51, 0.52, 0.53, 0.54, 0.55, 0.56, 0.57,
0.58, 0.59, 0.6
],
dtype='complex128')
lower_x = np.array([
0.1, 0.11, 0.12, 0.13, 0.14, 0.15, 0.16, 0.17, 0.18, 0.19, 0.2, 0.21,
0.22, 0.23, 0.24, 0.25, 0.26, 0.27, 0.28, 0.29, 0.3, 0.31, 0.32, 0.33,
0.34, 0.35, 0.36, 0.37, 0.38, 0.39, 0.4, 0.41, 0.42, 0.43, 0.44, 0.45,
0.46, 0.47, 0.48, 0.49, 0.5, 0.51, 0.52, 0.53, 0.54, 0.55, 0.56, 0.57,
0.58, 0.59, 0.6
],
dtype='complex128')
upper_y = np.array([
0.0513, 0.0537, 0.0559, 0.0580, 0.0600, 0.0619, 0.0636, 0.0652, 0.0668,
0.0682, 0.0696, 0.0709, 0.0721, 0.0732, 0.0742, 0.0752, 0.0761, 0.0769,
0.0776, 0.0782, 0.0788, 0.0793, 0.0797, 0.0801, 0.0804, 0.0806, 0.0808,
0.0808, 0.0808, 0.0807, 0.0806, 0.0804, 0.0801, 0.0798, 0.0794, 0.0789,
0.0784, 0.0778, 0.0771, 0.0764, 0.0757, 0.0749, 0.0740, 0.0732, 0.0723,
0.0713, 0.0703, 0.0692, 0.0681, 0.0669, 0.0657
],
dtype='complex128')
lower_y = np.array([
-0.0296, -0.0307, -0.0317, -0.0326, -0.0335, -0.0343, -0.0350, -0.0357,
-0.0363, -0.0368, -0.0373, -0.0378, -0.0382, -0.0386, -0.0389, -0.0391,
-0.0394, -0.0395, -0.0397, -0.0398, -0.0398, -0.0398, -0.0398, -0.0397,
-0.0396, -0.0394, -0.0392, -0.0389, -0.0386, -0.0382, -0.0378, -0.0374,
-0.0369, -0.0363, -0.0358, -0.0352, -0.0345, -0.0338, -0.0331, -0.0324,
-0.0316, -0.0308, -0.0300, -0.0292, -0.0283, -0.0274, -0.0265, -0.0256,
-0.0246, -0.0237, -0.0227
],
dtype='complex128')
Rcurv = RadiusCurvature(upper_x, lower_x, upper_y, lower_y)
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 15,
'num_x': 3,
'wing_type': 'rect',
'symmetry': True,
'chord_cos_spacing': 0,
'span_cos_spacing': 0,
'num_twist_cp': 4
}
mesh = generate_mesh(mesh_dict)
# Batteries and solar panels
densityPV = 0.23 #kg/m^2
energeticDensityBattery = 435 * 0.995 * 0.95 * 0.875 * 0.97 #Wh/kg 0.995=battery controller efficiency, 0.95=end of life capacity loss of 5%, 0.97=min battery SOC of 3%, 0.875=packaging efficiency
emissionBat = 0.104 / 0.995 / 0.95 / 0.875 / 0.97 #[kgCO2/Wh]
night_hours = 13 #h
productivityPV = 350.0 * 0.97 * 0.95 #[W/m^2] 350 from Zephyr power figure, 0.97=MPPT efficiency, 0.95=battery round trip efficiency
emissionPV = 0.05 / 0.97 / 0.95 #[kgCO2/W] emissions of the needed PV surface to produce 1W
emissionsPerW = emissionPV + emissionBat * night_hours #[kgCO2/W]
# Dictionary for the lifting surface
surf_dict = {
# Wing definition
'name':
'wing', # give the surface some name
'symmetry':
True, # if True, model only one half of the lifting surface
'S_ref_type':
'projected', # how we compute the wing area,
# can be 'wetted' or 'projected'
'mesh':
mesh,
'fem_model_type':
'wingbox', # 'wingbox' or 'tube'
'data_x_upper':
upper_x,
'data_x_lower':
lower_x,
'data_y_upper':
upper_y,
'data_y_lower':
lower_y,
'airfoil_radius_curvature':
Rcurv,
'twist_cp':
np.array([10., 20., 20., 20.]), # [deg]
'chord_cp': [1.5], # [m]
'span':
span, #[m]
'taper':
0.3,
'spar_thickness_cp':
np.array([spar, spar, spar, spar]), # [m]
'skin_thickness_cp':
np.array([skin / 2, skin, skin * 1.5, 2 * skin]), # [m]
't_over_c_cp':
np.array([0.75 * toverc, toverc, toverc, 1.25 * toverc]), #TODELETE
'original_wingbox_airfoil_t_over_c':
0.12,
# Aerodynamic deltas.
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
# They can be used to account for things that are not included, such as contributions from the fuselage, camber, etc.
'CL0':
0.0, # CL delta
'CD0':
0.0078, # CD delta
'with_viscous':
True, # if true, compute viscous drag
'with_wave':
True, # if true, compute wave drag
# Airfoil properties for viscous drag calculation
'k_lam':
0.80,
#'k_lam' : 0.05, # fraction of chord with laminar
# flow, used for viscous drag
'c_max_t':
.349, # chordwise location of maximum thickness
# Materials
'materlist':
materials,
'puissanceMM':
1, #power used in muli-material function
# Structural values
'strength_factor_for_upper_skin':
1.0, # the yield stress is multiplied by this factor for the upper skin
'wing_weight_ratio':
1.,
'exact_failure_constraint':
False, # if false, use KS function
'struct_weight_relief':
True,
# Engines
'n_point_masses':
1, # number of point masses in the system; in this case, the engine (omit option if no point masses)
# Power
'productivityPV':
productivityPV, #[W/m^2]
'densityPV':
densityPV + productivityPV / energeticDensityBattery *
night_hours, #[kg/m^2] the weight of the batteries is counted here
'payload_power':
125.5, #[W] payload=150 + avionics=211
'motor_propeller_efficiency':
0.84, #thrusting power/electrical power used by propulsion
'co2PV':
emissionsPerW * productivityPV /
(densityPV + productivityPV / energeticDensityBattery *
night_hours), #[kgCO2/kg] #co2 burden of PV cells and battery
'prop_density':
0.0058, #[kg/W]
'mppt_density':
0.00045, #[kg/W]
}
surfaces = [surf_dict]
# Create the problem and assign the model group
prob = Problem()
# Add problem information as an independent variables component data for altitude=23240 m and 0 m
speed = 15.56 #m/s
speed_dive = 1.4 * speed #m/s
gust_speed = 3.4 #m/s
rho_air = 0.089 #kg/m**3
speed_sound = 295.1 #m/s
#n_gust = 1 + 0.5*rho_air*speed_dive*gust_speed*2*pi/3000
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('Mach_number',
val=np.array([
speed / speed_sound,
(speed_dive**2 + gust_speed**2)**0.5 /
speed_sound, 0
]))
indep_var_comp.add_output(
'v',
val=np.array([speed, (speed_dive**2 + gust_speed**2)**0.5, 0]),
units='m/s')
indep_var_comp.add_output('re',val=np.array([rho_air*speed*1./(1.4*1e-5), \
rho_air*speed_dive*1./(1.4*1e-5), 0]), units='1/m') #L=10m,
indep_var_comp.add_output('rho',
val=np.array([rho_air, rho_air, 1.225]),
units='kg/m**3')
indep_var_comp.add_output('speed_of_sound',
val=np.array([speed_sound, speed_sound, 340]),
units='m/s')
indep_var_comp.add_output('W0_without_point_masses', val=8, units='kg')
indep_var_comp.add_output('load_factor', val=np.array([1., 1.1, 0.]))
indep_var_comp.add_output('alpha', val=0., units='deg')
indep_var_comp.add_output('alpha_gust',
val=atan(gust_speed / speed_dive) * 180 / pi,
units='deg')
indep_var_comp.add_output('empty_cg', val=np.zeros((3)), units='m')
indep_var_comp.add_output('mrho',
val=np.array([mrhoi, mrhoi]),
units='kg/m**3')
indep_var_comp.add_output('engine_location', val=-0.3) #VMGM
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
# Loop over each surface in the surfaces list
for surface in surfaces:
# Get the surface name and create a group to contain components
# only for this surface
name = surface['name']
aerostruct_group = AerostructGeometry(surface=surface)
# Add groups to the problem with the name of the surface.
prob.model.add_subsystem(name, aerostruct_group)
prob.model.add_subsystem('YoungMM',
YoungMM(surface=surface),
promotes_inputs=['mrho'],
promotes_outputs=['young']) #VMGM
prob.model.add_subsystem('ShearMM',
ShearMM(surface=surface),
promotes_inputs=['mrho'],
promotes_outputs=['shear']) #VMGM
prob.model.add_subsystem('YieldMM',
YieldMM(surface=surface),
promotes_inputs=['mrho'],
promotes_outputs=['yield']) #VMGM
prob.model.add_subsystem('CO2MM',
CO2MM(surface=surface),
promotes_inputs=['mrho'],
promotes_outputs=['co2']) #VMGM
prob.model.add_subsystem(
'PointMassLocations',
PointMassLocations(surface=surface),
promotes_inputs=['engine_location', 'span', 'nodes'],
promotes_outputs=['point_mass_locations']) #VMGM
prob.model.add_subsystem('PointMasses',
PointMasses(surface=surface),
promotes_inputs=['PV_surface'],
promotes_outputs=['point_masses']) #VMGM
prob.model.add_subsystem(
'W0_comp',
ExecComp('W0 = W0_without_point_masses + 2*sum(point_masses)',
units='kg'),
promotes=['*'])
prob.model.connect('mrho',
name + '.struct_setup.structural_mass.mrho') #ED
prob.model.connect('young', name +
'.struct_setup.assembly.local_stiff.young') #VMGM
prob.model.connect('shear', name +
'.struct_setup.assembly.local_stiff.shear') #VMGM
prob.model.connect('wing.span', 'span') #VMGM
prob.model.connect('AS_point_0.total_perf.PV_surface', 'PV_surface') #VMGM
prob.model.connect(name + '.nodes', 'nodes') #VMGM
# Loop through and add a certain number of aerostruct points
for i in range(3):
# for i in range(1):
point_name = 'AS_point_{}'.format(i)
# Connect the parameters within the model for each aero point
# Create the aerostruct point group and add it to the model
AS_point = AerostructPoint(surfaces=surfaces)
prob.model.add_subsystem(point_name, AS_point)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v', src_indices=[i])
prob.model.connect('Mach_number',
point_name + '.Mach_number',
src_indices=[i])
prob.model.connect('re', point_name + '.re', src_indices=[i])
prob.model.connect('rho', point_name + '.rho', src_indices=[i])
prob.model.connect('W0', point_name + '.W0')
prob.model.connect('speed_of_sound',
point_name + '.speed_of_sound',
src_indices=[i])
prob.model.connect('empty_cg', point_name + '.empty_cg')
prob.model.connect('load_factor',
point_name + '.load_factor',
src_indices=[i])
for surface in surfaces:
name = surface['name']
prob.model.connect('load_factor',
point_name + '.coupled.load_factor',
src_indices=[i]) #for PV distributed weight
com_name = point_name + '.' + name + '_perf.'
prob.model.connect(
name + '.local_stiff_transformed',
point_name + '.coupled.' + name + '.local_stiff_transformed')
prob.model.connect(name + '.nodes',
point_name + '.coupled.' + name + '.nodes')
prob.model.connect('young',
com_name + 'struct_funcs.vonmises.young')
prob.model.connect('shear',
com_name + 'struct_funcs.vonmises.shear')
prob.model.connect('yield',
com_name + 'struct_funcs.failure.yield') #VMGM
prob.model.connect('young',
com_name + 'struct_funcs.buckling.young') #VMGM
prob.model.connect('shear',
com_name + 'struct_funcs.buckling.shear') #VMGM
prob.model.connect(name + '.t_over_c', com_name +
'struct_funcs.buckling.t_over_c') #VMGM
# Connect aerodyamic mesh to coupled group mesh
prob.model.connect(name + '.mesh',
point_name + '.coupled.' + name + '.mesh')
if surf_dict['struct_weight_relief']:
prob.model.connect(
name + '.element_mass',
point_name + '.coupled.' + name + '.element_mass')
# Connect performance calculation variables
prob.model.connect(name + '.nodes', com_name + 'nodes')
prob.model.connect(
name + '.cg_location',
point_name + '.' + 'total_perf.' + name + '_cg_location')
prob.model.connect(
name + '.structural_mass',
point_name + '.' + 'total_perf.' + name + '_structural_mass')
# Connect wingbox properties to von Mises stress calcs
prob.model.connect(name + '.Qz', com_name + 'Qz')
prob.model.connect(name + '.J', com_name + 'J')
prob.model.connect(name + '.A_enc', com_name + 'A_enc')
prob.model.connect(name + '.htop', com_name + 'htop')
prob.model.connect(name + '.hbottom', com_name + 'hbottom')
prob.model.connect(name + '.hfront', com_name + 'hfront')
prob.model.connect(name + '.hrear', com_name + 'hrear')
prob.model.connect(name + '.Qx', com_name + 'Qx')
prob.model.connect(name + '.spar_thickness',
com_name + 'spar_thickness')
prob.model.connect(name + '.skin_thickness',
com_name + 'skin_thickness')
prob.model.connect(name + '.t_over_c', com_name + 't_over_c')
coupled_name = point_name + '.coupled.' + name
prob.model.connect('point_masses', coupled_name + '.point_masses')
prob.model.connect('point_mass_locations',
coupled_name + '.point_mass_locations')
prob.model.connect('alpha', 'AS_point_0' + '.alpha')
prob.model.connect('alpha_gust', 'AS_point_1' + '.alpha')
prob.model.connect('alpha', 'AS_point_2' + '.alpha') #VMGM
# Here we add the co2 objective componenet to the model
prob.model.add_subsystem('emittedco2',
structureCO2(surfaces=surfaces),
promotes_inputs=['co2'],
promotes_outputs=['emitted_co2']) #VMGM
prob.model.connect('wing.structural_mass', 'emittedco2.mass')
prob.model.connect('AS_point_0.total_perf.PV_mass', 'emittedco2.PV_mass')
prob.model.connect('wing.spars_mass', 'emittedco2.spars_mass') #VMGM
#Here we add the thickness constraint to the model
prob.model.add_subsystem('acceptableThickness',
checkThickness(surface=surface),
promotes_outputs=['acceptableThickness'])
prob.model.connect('wing.geometry.t_over_c_cp',
'acceptableThickness.t_over_c')
prob.model.connect('wing.chord_cp', 'acceptableThickness.chordroot')
prob.model.connect('wing.skin_thickness_cp',
'acceptableThickness.skinThickness')
prob.model.connect('wing.taper', 'acceptableThickness.taper')
prob.model.connect('wing.struct_setup.PV_areas',
'AS_point_0.coupled.wing.struct_states.PV_areas')
prob.model.connect('AS_point_0.total_perf.PV_mass',
'AS_point_0.coupled.wing.struct_states.PV_mass')
prob.model.connect('wing.struct_setup.PV_areas',
'AS_point_1.coupled.wing.struct_states.PV_areas')
prob.model.connect('AS_point_0.total_perf.PV_mass',
'AS_point_1.coupled.wing.struct_states.PV_mass')
prob.model.connect('wing.chord_cp',
'AS_point_1.wing_perf.struct_funcs.chord')
prob.model.connect('wing.taper', 'AS_point_1.wing_perf.struct_funcs.taper')
prob.model.connect('wing.struct_setup.PV_areas',
'AS_point_2.coupled.wing.struct_states.PV_areas') #VMGM
prob.model.connect('AS_point_0.total_perf.PV_mass',
'AS_point_2.coupled.wing.struct_states.PV_mass') #VMGM
prob.model.connect('wing.chord_cp',
'AS_point_2.wing_perf.struct_funcs.chord') #VMGM
prob.model.connect('wing.taper',
'AS_point_2.wing_perf.struct_funcs.taper') #VMGM
# Objective function
prob.model.add_objective('emitted_co2', scaler=1e-4)
# Design variables
prob.model.add_design_var('wing.twist_cp',
lower=-20.,
upper=20.,
scaler=0.1) #VMGM
prob.model.add_design_var('wing.spar_thickness_cp',
lower=0.0001,
upper=0.1,
scaler=1e4)
prob.model.add_design_var('wing.skin_thickness_cp',
lower=0.0001,
upper=0.1,
scaler=1e3)
prob.model.add_design_var('wing.span', lower=1., upper=1000., scaler=0.1)
prob.model.add_design_var('wing.chord_cp', lower=1.4, upper=500., scaler=1)
##prob.model.add_design_var('wing.span', lower=1., upper=50., scaler=0.1)
##prob.model.add_design_var('wing.chord_cp', lower=1., upper=500., scaler=1)
prob.model.add_design_var('wing.taper', lower=0.3, upper=0.99, scaler=10)
prob.model.add_design_var('wing.geometry.t_over_c_cp',
lower=0.01,
upper=0.4,
scaler=10.)
prob.model.add_design_var('mrho', lower=504.5, upper=504.5,
scaler=0.001) #ED
#prob.model.add_design_var('mrho', lower=500, upper=8000, scaler=0.001) #ED
prob.model.add_design_var('engine_location', lower=-1, upper=0,
scaler=10.) #VMGM
# Constraints
prob.model.add_constraint('AS_point_0.L_equals_W', equals=0.)
prob.model.add_constraint(
'AS_point_0.enough_power', upper=0.
) #Make sure needed power stays below the solar power producible by the wing
prob.model.add_constraint(
'acceptableThickness', upper=0.
) #Make sure skin thickness fits in the wing (to avoid negative spar mass)
#prob.model.add_constraint('AS_point_0.wing_perf.failure', upper=0.) #VMGM
#prob.model.add_constraint('AS_point_0.wing_perf.buckling', upper=0.) #VMGM
prob.model.add_constraint('AS_point_1.wing_perf.failure', upper=0.)
prob.model.add_constraint('AS_point_1.wing_perf.buckling', upper=0.)
prob.model.add_constraint('AS_point_2.wing_perf.failure', upper=0.) #VMGM
prob.model.add_constraint('AS_point_2.wing_perf.buckling', upper=0.) #VMGM
prob.model.add_constraint(
'AS_point_0.coupled.wing.S_ref',
upper=200.) # Surface constarint to avoid snowball effect
#prob.model.approx_totals(method='fd', step=5e-7, form='forward', step_calc='rel')
#prob.model.nonlinear_solver = newton = NewtonSolver()
prob.driver = ScipyOptimizeDriver()
prob.driver.options['optimizer'] = 'SLSQP'
prob.driver.options['tol'] = 1e-6
prob.driver.options['maxiter'] = 250
#prob.driver.options['debug_print'] = ['desvars','ln_cons','nl_cons','totals']
recorder = SqliteRecorder("aerostructMrhoi" + str(mrhoi) + "sk" +
str(skin) + "sr" + str(spar) + "sn" + str(span) +
"tc" + str(toverc) + ".db")
prob.driver.add_recorder(recorder)
# We could also just use prob.driver.recording_options['includes']=['*'] here, but for large meshes the database file becomes extremely large. So we just select the variables we need.
prob.driver.recording_options['includes'] = [
'alpha',
'rho',
'v',
'cg',
'alpha_gust', #
'AS_point_1.cg',
'AS_point_0.cg', #
'AS_point_0.cg', #ED
'AS_point_0.coupled.wing_loads.loads',
'AS_point_1.coupled.wing_loads.loads', #
'AS_point_2.coupled.wing_loads.loads', #
'AS_point_0.coupled.wing.normals',
'AS_point_1.coupled.wing.normals', #
'AS_point_0.coupled.wing.widths',
'AS_point_1.coupled.wing.widths', #
'AS_point_0.coupled.aero_states.wing_sec_forces',
'AS_point_1.coupled.aero_states.wing_sec_forces', #
'AS_point_2.coupled.aero_states.wing_sec_forces', #
'AS_point_0.wing_perf.CL1',
'AS_point_1.wing_perf.CL1', #
'AS_point_0.coupled.wing.S_ref',
'AS_point_1.coupled.wing.S_ref', #
'wing.geometry.twist',
'wing.geometry.mesh.taper.taper',
'wing.geometry.mesh.stretch.span',
'wing.geometry.mesh.scale_x.chord',
'wing.mesh',
'wing.skin_thickness',
'wing.spar_thickness',
'wing.t_over_c',
'wing.structural_mass',
'AS_point_0.wing_perf.vonmises',
'AS_point_1.wing_perf.vonmises', #
'AS_point_0.coupled.wing.def_mesh',
'AS_point_1.coupled.wing.def_mesh', #
'AS_point_0.total_perf.PV_mass',
'AS_point_0.total_perf.total_weight',
'AS_point_0.CL',
'AS_point_0.CD',
'yield',
'point_masses', #VMGM
'point_mass_locations', #VMGM
'engine_location', #VMGM
]
prob.driver.recording_options['record_objectives'] = True
prob.driver.recording_options['record_constraints'] = True
prob.driver.recording_options['record_desvars'] = True
prob.driver.recording_options['record_inputs'] = True
# Set up the problem
prob.setup()
##prob.run_model() #ED2
##data = prob.check_partials(out_stream=None, compact_print=True, method='cs') #ED2
##print(data) #ED2
prob.run_driver()
##print (prob.model.list_outputs(values=False, implicit=False)) #VMGM
print('The wingbox mass (including the wing_weight_ratio) is',
prob['wing.structural_mass'][0], '[kg]')
endtime = time.time()
totaltime = endtime - starttime
print('computing time is', totaltime)
print('co2 emissions are', prob['emitted_co2'][0])
print('The wing surface is', prob['AS_point_0.coupled.wing.S_ref'][0],
'[m2]') #VMGM
return prob['wing.structural_mass'][0], totaltime, prob['mrho'][0], prob[
'emitted_co2'][0]
def test_brachistochrone_vector_ode_path_constraints_rk_partial_indices(
self):
p = Problem(model=Group())
p.driver = ScipyOptimizeDriver()
p.driver.options['dynamic_simul_derivs'] = True
phase = Phase(ode_class=BrachistochroneVectorStatesODE,
transcription=RungeKutta(num_segments=20))
p.model.add_subsystem('phase0', phase)
phase.set_time_options(fix_initial=True, duration_bounds=(.5, 10))
phase.set_state_options('pos', fix_initial=True, fix_final=False)
phase.set_state_options('v', fix_initial=True, fix_final=False)
phase.add_control('theta',
continuity=True,
rate_continuity=True,
units='deg',
lower=0.01,
upper=179.9)
phase.add_design_parameter('g', units='m/s**2', opt=False, val=9.80665)
phase.add_boundary_constraint('pos', loc='final', equals=[10, 5])
phase.add_path_constraint('pos_dot',
shape=(2, ),
units='m/s',
indices=[1],
lower=-4,
upper=4)
phase.add_timeseries_output('pos_dot', shape=(2, ), units='m/s')
# Minimize time at the end of the phase
phase.add_objective('time', loc='final', scaler=10)
p.model.linear_solver = DirectSolver()
p.setup(check=True, force_alloc_complex=True)
p['phase0.t_initial'] = 0.0
p['phase0.t_duration'] = 2.0
pos0 = [0, 10]
posf = [10, 5]
p['phase0.states:pos'] = phase.interpolate(ys=[pos0, posf],
nodes='state_input')
p['phase0.states:v'] = phase.interpolate(ys=[0, 9.9],
nodes='state_input')
p['phase0.controls:theta'] = phase.interpolate(ys=[5, 100],
nodes='control_input')
p['phase0.design_parameters:g'] = 9.80665
p.run_driver()
assert_rel_error(self,
np.min(p.get_val('phase0.timeseries.pos_dot')[:, -1]),
-4,
tolerance=1.0E-2)
# Plot results
if SHOW_PLOTS:
exp_out = phase.simulate(times_per_seg=20)
fig, ax = plt.subplots()
fig.suptitle('Brachistochrone Solution')
x_imp = p.get_val('phase0.timeseries.states:pos')[:, 0]
y_imp = p.get_val('phase0.timeseries.states:pos')[:, 1]
x_exp = exp_out.get_val('phase0.timeseries.states:pos')[:, 0]
y_exp = exp_out.get_val('phase0.timeseries.states:pos')[:, 1]
ax.plot(x_imp, y_imp, 'ro', label='implicit')
ax.plot(x_exp, y_exp, 'b-', label='explicit')
ax.set_xlabel('x (m)')
ax.set_ylabel('y (m)')
ax.grid(True)
ax.legend(loc='upper right')
fig, ax = plt.subplots()
fig.suptitle('Brachistochrone Solution\nVelocity')
t_imp = p.get_val('phase0.timeseries.time')
t_exp = exp_out.get_val('phase0.timeseries.time')
xdot_imp = p.get_val('phase0.timeseries.pos_dot')[:, 0]
ydot_imp = p.get_val('phase0.timeseries.pos_dot')[:, 1]
xdot_exp = exp_out.get_val('phase0.timeseries.pos_dot')[:, 0]
ydot_exp = exp_out.get_val('phase0.timeseries.pos_dot')[:, 1]
ax.plot(t_imp, xdot_imp, 'bo', label='implicit')
ax.plot(t_exp, xdot_exp, 'b-', label='explicit')
ax.plot(t_imp, ydot_imp, 'ro', label='implicit')
ax.plot(t_exp, ydot_exp, 'r-', label='explicit')
ax.set_xlabel('t (s)')
ax.set_ylabel('v (m/s)')
ax.grid(True)
ax.legend(loc='upper right')
fig, ax = plt.subplots()
fig.suptitle('Brachistochrone Solution')
x_imp = p.get_val('phase0.timeseries.time')
y_imp = p.get_val('phase0.timeseries.control_rates:theta_rate2')
x_exp = exp_out.get_val('phase0.timeseries.time')
y_exp = exp_out.get_val(
'phase0.timeseries.control_rates:theta_rate2')
ax.plot(x_imp, y_imp, 'ro', label='implicit')
ax.plot(x_exp, y_exp, 'b-', label='explicit')
ax.set_xlabel('time (s)')
ax.set_ylabel('theta rate2 (rad/s**2)')
ax.grid(True)
ax.legend(loc='lower right')
plt.show()
return p
def test(self):
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 5,
'num_x': 3,
'wing_type': 'rect',
'symmetry': True,
'span_cos_spacing': 1.,
'span': 10,
'chord': 1
}
mesh = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name': 'wing', # name of the surface
'type': 'structural',
'symmetry': True, # if true, model one half of wing
# reflected across the plane y = 0
'fem_model_type': 'tube',
'mesh': mesh,
'num_x': mesh.shape[0],
'num_y': mesh.shape[1],
# Structural values are based on aluminum 7075
'E': 70.e9, # [Pa] Young's modulus of the spar
'G': 30.e9, # [Pa] shear modulus of the spar
'yield':
500.e6 / 2.5, # [Pa] yield stress divided by 2.5 for limiting case
'mrho': 3.e3, # [kg/m^3] material density
'fem_origin': 0.35, # normalized chordwise location of the spar
't_over_c_cp': np.array([0.15]), # maximum airfoil thickness
'thickness_cp': np.ones((3)) * .0075,
'wing_weight_ratio': 1.,
'exact_failure_constraint': False,
}
# Create the problem and assign the model group
prob = Problem()
ny = surf_dict['num_y']
loads = np.zeros((ny, 6))
loads[0, 2] = 1e4
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('loads', val=loads, units='N')
indep_var_comp.add_output('load_factor', val=1.)
struct_group = SpatialBeamAlone(surface=surf_dict)
# Add indep_vars to the structural group
struct_group.add_subsystem('indep_vars',
indep_var_comp,
promotes=['*'])
prob.model.add_subsystem(surf_dict['name'], struct_group)
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['disp'] = True
# Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.thickness_cp',
lower=0.001,
upper=0.25,
scaler=1e2)
prob.model.add_constraint('wing.failure', upper=0.)
prob.model.add_constraint('wing.thickness_intersects', upper=0.)
# Add design variables, constraisnt, and objective on the problem
prob.model.add_objective('wing.structural_weight', scaler=1e-5)
# Set up the problem
prob.setup()
# from openmdao.api import view_model
# view_model(prob)
prob.run_driver()
assert_rel_error(self, prob['wing.structural_weight'][0],
1144.8503583047038, 1e-4)
def test_cruise_results(self):
p = Problem(model=Group())
if optimizer == 'SNOPT':
p.driver = pyOptSparseDriver()
p.driver.options['optimizer'] = optimizer
p.driver.options['dynamic_simul_derivs'] = True
p.driver.opt_settings['Major iterations limit'] = 100
p.driver.opt_settings['Major step limit'] = 0.05
p.driver.opt_settings['Major feasibility tolerance'] = 1.0E-6
p.driver.opt_settings['Major optimality tolerance'] = 1.0E-6
p.driver.opt_settings["Linesearch tolerance"] = 0.10
p.driver.opt_settings['iSumm'] = 6
p.driver.opt_settings['Verify level'] = 3
else:
p.driver = ScipyOptimizeDriver()
p.driver.options['dynamic_simul_derivs'] = True
phase = Phase('gauss-lobatto',
ode_class=AircraftODE,
num_segments=1,
transcription_order=13)
# Pass Reference Area from an external source
assumptions = p.model.add_subsystem('assumptions', IndepVarComp())
assumptions.add_output('S', val=427.8, units='m**2')
assumptions.add_output('mass_empty', val=1.0, units='kg')
assumptions.add_output('mass_payload', val=1.0, units='kg')
p.model.add_subsystem('phase0', phase)
phase.set_time_options(initial_bounds=(0, 0),
duration_bounds=(3600, 3600),
duration_ref=3600)
phase.set_state_options('range',
units='km',
fix_initial=True,
fix_final=False,
scaler=0.01,
defect_scaler=0.01)
phase.set_state_options('mass_fuel',
fix_final=True,
upper=20000.0,
lower=0.0,
scaler=1.0E-4,
defect_scaler=1.0E-2)
phase.add_control('alt',
units='km',
opt=False,
rate_param='climb_rate')
phase.add_control('mach', units=None, opt=False)
phase.add_input_parameter('S', units='m**2')
phase.add_input_parameter('mass_empty', units='kg')
phase.add_input_parameter('mass_payload', units='kg')
phase.add_path_constraint('propulsion.tau', lower=0.01, upper=1.0)
p.model.connect('assumptions.S', 'phase0.input_parameters:S')
p.model.connect('assumptions.mass_empty',
'phase0.input_parameters:mass_empty')
p.model.connect('assumptions.mass_payload',
'phase0.input_parameters:mass_payload')
phase.add_objective('time', loc='final', ref=3600)
p.model.linear_solver = DirectSolver(assemble_jac=True)
p.model.options['assembled_jac_type'] = 'csc'
p.setup()
p['phase0.t_initial'] = 0.0
p['phase0.t_duration'] = 1.515132 * 3600.0
p['phase0.states:range'] = phase.interpolate(ys=(0, 1296.4),
nodes='state_input')
p['phase0.states:mass_fuel'] = phase.interpolate(ys=(12236.594555, 0),
nodes='state_input')
p['phase0.controls:mach'] = 0.8
p['phase0.controls:alt'] = 5.0
p['assumptions.S'] = 427.8
p['assumptions.mass_empty'] = 0.15E6
p['assumptions.mass_payload'] = 84.02869 * 400
p.run_driver()
tas = phase.get_values('tas_comp.TAS', units='m/s')
time = phase.get_values('time', units='s')
range = phase.get_values('range', units='m')
assert_rel_error(self, range, tas * time, tolerance=1.0E-9)
def test(self):
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 7,
'wing_type': 'uCRM_based',
'symmetry': True,
'num_twist_cp': 5
}
mesh, twist_cp = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name':
'wing', # name of the surface
# reflected across the plane y = 0
'S_ref_type':
'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type':
'wingbox',
'symmetry':
True,
'spar_thickness_cp':
np.array([0.004, 0.005, 0.005, 0.008, 0.008, 0.01]), # [m]
'skin_thickness_cp':
np.array([0.005, 0.01, 0.015, 0.020, 0.025, 0.026]),
'twist_cp':
np.array([4., 5., 8., 8., 8., 9.]),
'mesh':
mesh,
'data_x_upper':
upper_x,
'data_x_lower':
lower_x,
'data_y_upper':
upper_y,
'data_y_lower':
lower_y,
'strength_factor_for_upper_skin':
1.,
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0':
0.0, # CL of the surface at alpha=0
'CD0':
0.0078, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam':
0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp':
np.array([0.08, 0.08, 0.08, 0.10, 0.10, 0.08]),
'original_wingbox_airfoil_t_over_c':
0.12,
'c_max_t':
.38, # chordwise location of maximum thickness
'with_viscous':
True,
'with_wave':
True, # if true, compute wave drag
# Structural values are based on aluminum 7075
'E':
73.1e9, # [Pa] Young's modulus
'G': (
73.1e9 / 2 / 1.33
), # [Pa] shear modulus (calculated using E and the Poisson's ratio here)
'yield': (420.e6 / 1.5), # [Pa] allowable yield stress
'mrho':
2.78e3, # [kg/m^3] material density
'strength_factor_for_upper_skin':
1.0, # the yield stress is multiplied by this factor for the upper skin
# 'fem_origin' : 0.35, # normalized chordwise location of the spar
'wing_weight_ratio':
1.25,
'struct_weight_relief':
False,
'distributed_fuel_weight':
True,
# Constraints
'exact_failure_constraint':
True, # if false, use KS function
'fuel_density':
803., # [kg/m^3] fuel density (only needed if the fuel-in-wing volume constraint is used)
'Wf_reserve':
15000., # [kg] reserve fuel mass
}
# Create the problem and assign the model group
prob = Problem()
ny = surf_dict['mesh'].shape[1]
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('loads',
val=np.ones((ny, 6)) * 2e5,
units='N')
indep_var_comp.add_output('load_factor', val=1.)
indep_var_comp.add_output('fuel_mass', val=10000., units='kg')
struct_group = SpatialBeamAlone(surface=surf_dict)
# Add indep_vars to the structural group
struct_group.add_subsystem('indep_vars',
indep_var_comp,
promotes=['*'])
prob.model.add_subsystem(surf_dict['name'], struct_group)
if surf_dict['distributed_fuel_weight']:
prob.model.connect('wing.fuel_mass',
'wing.struct_states.fuel_mass')
prob.model.connect('wing.struct_setup.fuel_vols',
'wing.struct_states.fuel_vols')
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['tol'] = 1e-9
# Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.spar_thickness_cp',
lower=0.01,
upper=0.5,
ref=1e-1)
prob.model.add_design_var('wing.skin_thickness_cp',
lower=0.01,
upper=0.5,
ref=1e-1)
prob.model.add_constraint('wing.failure', upper=0.)
#prob.model.add_constraint('wing.thickness_intersects', upper=0.)
# Add design variables, constraisnt, and objective on the problem
prob.model.add_objective('wing.structural_mass', scaler=1e-5)
# Set up the problem
prob.setup(force_alloc_complex=False)
prob.run_model()
data = prob.check_partials(compact_print=True,
out_stream=None,
method='fd')
assert_check_partials(data, atol=1e20, rtol=1e-6)
prob.run_driver()
assert_rel_error(self, prob['wing.structural_mass'], 16704.07393593,
1e-6)
def driver(self):
# type: () -> Driver
"""Method to return a preconfigured driver.
Returns
-------
Driver
A preconfigured driver element to be used for the Problem instance.
Raises
------
ValueError
Value error are raised if unsupported settings are encountered.
"""
if self.driver_type == 'optimizer':
# Find optimizer element in CMDOWS file
opt_uid = self.driver_uid
opt_elem = get_element_by_uid(self.elem_cmdows, opt_uid)
# Load settings from CMDOWS file
opt_package = get_opt_setting_safe(opt_elem, 'package', 'SciPy')
opt_algo = get_opt_setting_safe(opt_elem, 'algorithm', 'SLSQP')
opt_maxiter = get_opt_setting_safe(opt_elem,
'maximumIterations',
50,
expected_type='int')
opt_convtol = get_opt_setting_safe(opt_elem,
'convergenceTolerance',
1e-6,
expected_type='float')
# Apply settings to the driver
# driver
if opt_package == 'SciPy':
driver = ScipyOptimizeDriver()
elif opt_package == 'pyOptSparse':
try:
from openmdao.api import pyOptSparseDriver
except ImportError:
raise PyOptSparseImportError()
driver = pyOptSparseDriver()
else:
raise ValueError(
'Unsupported package {} encountered in CMDOWS file for "{}".'
.format(opt_package, opt_uid))
# optimization algorithm
if opt_algo == 'SLSQP':
driver.options['optimizer'] = 'SLSQP'
elif opt_algo == 'COBYLA':
driver.options['optimizer'] = 'COBYLA'
elif opt_algo == 'L-BFGS-B':
driver.options['optimizer'] = 'L-BFGS-B'
else:
raise ValueError(
'Unsupported algorithm {} encountered in CMDOWS file for "{}".'
.format(opt_algo, opt_uid))
# maximum iterations and tolerance
if isinstance(driver, ScipyOptimizeDriver):
driver.options['maxiter'] = opt_maxiter
driver.options['tol'] = opt_convtol
elif isinstance(driver, pyOptSparseDriver):
driver.opt_settings['MAXIT'] = opt_maxiter
driver.opt_settings['ACC'] = opt_convtol
# Set default display and output settings
if isinstance(driver, ScipyOptimizeDriver):
driver.options['disp'] = False # Print the result
return driver
elif self.driver_type == 'doe':
# Find DOE element in CMDOWS file
doe_uid = self.driver_uid
doe_elem = get_element_by_uid(self.elem_cmdows, doe_uid)
# Load settings from CMDOWS file
doe_method = get_doe_setting_safe(doe_elem, 'method',
'Uniform design') # type: str
doe_runs = get_doe_setting_safe(doe_elem,
'runs',
5,
expected_type='int',
doe_method=doe_method,
required_for_doe_methods=[
'Latin hypercube design',
'Uniform design',
'Monte Carlo design'
])
doe_center_runs = get_doe_setting_safe(
doe_elem,
'centerRuns',
2,
expected_type='int',
doe_method=doe_method,
required_for_doe_methods=['Box-Behnken design'])
doe_seed = get_doe_setting_safe(doe_elem,
'seed',
None,
expected_type='int',
doe_method=doe_method,
required_for_doe_methods=[
'Latin hypercube design',
'Uniform design',
'Monte Carlo design'
])
doe_levels = get_doe_setting_safe(
doe_elem,
'levels',
2,
expected_type='int',
doe_method=doe_method,
required_for_doe_methods=['Full factorial design'])
# table
doe_data = []
if isinstance(doe_elem.find('settings/table'), _Element):
doe_table = doe_elem.find('settings/table')
doe_table_rows = [row for row in doe_table.iterchildren()]
n_samples = len(
[exp for exp in doe_table_rows[0].iterchildren()])
for idx in range(n_samples):
data_sample = []
for row_elem in doe_table_rows:
value = float(
row_elem.find(
'tableElement[@experimentID="{}"]'.format(
idx)).text)
data_sample.append(
[row_elem.attrib['relatedParameterUID'], value])
doe_data.append(data_sample)
else:
if doe_method in ['Custom design table']:
raise ValueError(
'Table element with data for custom design table missing in '
'CMDOWS file.')
# Apply settings to the driver
# define driver
driver = DOEDriver()
# define generator
if doe_method in ['Uniform design', 'Monte Carlo design']:
driver.options['generator'] = UniformGenerator(
num_samples=doe_runs, seed=doe_seed)
elif doe_method == 'Full factorial design':
driver.options['generator'] = FullFactorialGenerator(
levels=doe_levels)
elif doe_method == 'Box-Behnken design':
driver.options['generator'] = BoxBehnkenGenerator(
center=doe_center_runs)
elif doe_method == 'Latin hypercube design':
driver.options['generator'] = LatinHypercubeGenerator(
samples=doe_runs, criterion='maximin', seed=doe_seed)
elif doe_method == 'Custom design table':
driver.options['generator'] = ListGenerator(data=doe_data)
else:
raise ValueError(
'Could not match the doe_method {} with methods from OpenMDAO.'
.format(doe_method))
return driver
else:
return Driver()
def test(self):
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 7,
'num_x': 3,
'wing_type': 'uCRM_based',
'symmetry': True,
'chord_cos_spacing': 0,
'span_cos_spacing': 0,
'num_twist_cp': 6,
}
mesh, twist_cp = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name':
'wing', # name of the surface
'symmetry':
True, # if true, model one half of wing
'S_ref_type':
'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'mesh':
mesh,
'twist_cp':
np.array([4., 5., 8., 8., 8., 9.]),
'fem_model_type':
'wingbox',
'data_x_upper':
upper_x,
'data_x_lower':
lower_x,
'data_y_upper':
upper_y,
'data_y_lower':
lower_y,
'spar_thickness_cp':
np.array([0.004, 0.005, 0.005, 0.008, 0.008, 0.01]), # [m]
'skin_thickness_cp':
np.array([0.005, 0.01, 0.015, 0.020, 0.025, 0.026]),
'original_wingbox_airfoil_t_over_c':
0.12,
# Aerodynamic deltas.
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
# They can be used to account for things that are not included, such as contributions from the fuselage, nacelles, tail surfaces, etc.
'CL0':
0.0,
'CD0':
0.0078,
'with_viscous':
True, # if true, compute viscous drag
'with_wave':
True, # if true, compute wave drag
# Airfoil properties for viscous drag calculation
'k_lam':
0.05, # percentage of chord with laminar
# flow, used for viscous drag
'c_max_t':
.38, # chordwise location of maximum thickness
't_over_c_cp':
np.array([0.08, 0.08, 0.08, 0.10, 0.10, 0.08]),
# Structural values are based on aluminum 7075
'E':
73.1e9, # [Pa] Young's modulus
'G': (
73.1e9 / 2 / 1.33
), # [Pa] shear modulus (calculated using E and the Poisson's ratio here)
'yield': (420.e6 / 1.5), # [Pa] allowable yield stress
'mrho':
2.78e3, # [kg/m^3] material density
'strength_factor_for_upper_skin':
1.0, # the yield stress is multiplied by this factor for the upper skin
'wing_weight_ratio':
1.25,
'exact_failure_constraint':
False, # if false, use KS function
'struct_weight_relief':
True,
'distributed_fuel_weight':
True,
'fuel_density':
803., # [kg/m^3] fuel density (only needed if the fuel-in-wing volume constraint is used)
'Wf_reserve':
15000., # [kg] reserve fuel mass
}
surfaces = [surf_dict]
# Create the problem and assign the model group
prob = Problem()
# Add problem information as an independent variables component
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v',
val=np.array([.85 * 295.07, .64 * 340.294]),
units='m/s')
indep_var_comp.add_output('alpha', val=0., units='deg')
indep_var_comp.add_output('alpha_maneuver', val=0., units='deg')
indep_var_comp.add_output('Mach_number', val=np.array([0.85, 0.64]))
indep_var_comp.add_output('re',val=np.array([0.348*295.07*.85*1./(1.43*1e-5), \
1.225*340.294*.64*1./(1.81206*1e-5)]), units='1/m')
indep_var_comp.add_output('rho',
val=np.array([0.348, 1.225]),
units='kg/m**3')
indep_var_comp.add_output('CT', val=0.53 / 3600, units='1/s')
indep_var_comp.add_output('R', val=14.307e6, units='m')
indep_var_comp.add_output('W0',
val=148000 + surf_dict['Wf_reserve'],
units='kg')
indep_var_comp.add_output('speed_of_sound',
val=np.array([295.07, 340.294]),
units='m/s')
indep_var_comp.add_output('load_factor', val=np.array([1., 2.5]))
indep_var_comp.add_output('empty_cg', val=np.zeros((3)), units='m')
indep_var_comp.add_output('fuel_mass', val=10000., units='kg')
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
# Loop over each surface in the surfaces list
for surface in surfaces:
# Get the surface name and create a group to contain components
# only for this surface
name = surface['name']
aerostruct_group = AerostructGeometry(surface=surface)
# Add group to the problem with the name of the surface.
prob.model.add_subsystem(name, aerostruct_group)
# Loop through and add a certain number of aerostruct points
for i in range(2):
point_name = 'AS_point_{}'.format(i)
# Connect the parameters within the model for each aerostruct point
# Create the aero point group and add it to the model
AS_point = AerostructPoint(surfaces=surfaces,
internally_connect_fuelburn=False)
prob.model.add_subsystem(point_name, AS_point)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v', src_indices=[i])
prob.model.connect('Mach_number',
point_name + '.Mach_number',
src_indices=[i])
prob.model.connect('re', point_name + '.re', src_indices=[i])
prob.model.connect('rho', point_name + '.rho', src_indices=[i])
prob.model.connect('CT', point_name + '.CT')
prob.model.connect('R', point_name + '.R')
prob.model.connect('W0', point_name + '.W0')
prob.model.connect('speed_of_sound',
point_name + '.speed_of_sound',
src_indices=[i])
prob.model.connect('empty_cg', point_name + '.empty_cg')
prob.model.connect('load_factor',
point_name + '.load_factor',
src_indices=[i])
prob.model.connect('fuel_mass',
point_name + '.total_perf.L_equals_W.fuelburn')
prob.model.connect('fuel_mass',
point_name + '.total_perf.CG.fuelburn')
for surface in surfaces:
name = surface['name']
if surf_dict['distributed_fuel_weight']:
prob.model.connect('load_factor',
point_name + '.coupled.load_factor',
src_indices=[i])
com_name = point_name + '.' + name + '_perf.'
prob.model.connect(
name + '.local_stiff_transformed', point_name +
'.coupled.' + name + '.local_stiff_transformed')
prob.model.connect(name + '.nodes',
point_name + '.coupled.' + name + '.nodes')
# Connect aerodyamic mesh to coupled group mesh
prob.model.connect(name + '.mesh',
point_name + '.coupled.' + name + '.mesh')
if surf_dict['struct_weight_relief']:
prob.model.connect(
name + '.element_mass',
point_name + '.coupled.' + name + '.element_mass')
# Connect performance calculation variables
prob.model.connect(name + '.nodes', com_name + 'nodes')
prob.model.connect(
name + '.cg_location',
point_name + '.' + 'total_perf.' + name + '_cg_location')
prob.model.connect(
name + '.structural_mass', point_name + '.' +
'total_perf.' + name + '_structural_mass')
# Connect wingbox properties to von Mises stress calcs
prob.model.connect(name + '.Qz', com_name + 'Qz')
prob.model.connect(name + '.J', com_name + 'J')
prob.model.connect(name + '.A_enc', com_name + 'A_enc')
prob.model.connect(name + '.htop', com_name + 'htop')
prob.model.connect(name + '.hbottom', com_name + 'hbottom')
prob.model.connect(name + '.hfront', com_name + 'hfront')
prob.model.connect(name + '.hrear', com_name + 'hrear')
prob.model.connect(name + '.spar_thickness',
com_name + 'spar_thickness')
prob.model.connect(name + '.t_over_c', com_name + 't_over_c')
prob.model.connect('alpha', 'AS_point_0' + '.alpha')
prob.model.connect('alpha_maneuver', 'AS_point_1' + '.alpha')
# Here we add the fuel volume constraint componenet to the model
prob.model.add_subsystem('fuel_vol_delta',
WingboxFuelVolDelta(surface=surface))
prob.model.connect('wing.struct_setup.fuel_vols',
'fuel_vol_delta.fuel_vols')
prob.model.connect('AS_point_0.fuelburn', 'fuel_vol_delta.fuelburn')
if surf_dict['distributed_fuel_weight']:
prob.model.connect(
'wing.struct_setup.fuel_vols',
'AS_point_0.coupled.wing.struct_states.fuel_vols')
prob.model.connect(
'fuel_mass', 'AS_point_0.coupled.wing.struct_states.fuel_mass')
prob.model.connect(
'wing.struct_setup.fuel_vols',
'AS_point_1.coupled.wing.struct_states.fuel_vols')
prob.model.connect(
'fuel_mass', 'AS_point_1.coupled.wing.struct_states.fuel_mass')
comp = ExecComp('fuel_diff = (fuel_mass - fuelburn) / fuelburn')
prob.model.add_subsystem('fuel_diff',
comp,
promotes_inputs=['fuel_mass'],
promotes_outputs=['fuel_diff'])
prob.model.connect('AS_point_0.fuelburn', 'fuel_diff.fuelburn')
## Use these settings if you do not have pyOptSparse or SNOPT
prob.driver = ScipyOptimizeDriver()
prob.driver.options['optimizer'] = 'SLSQP'
prob.driver.options['tol'] = 1e-8
recorder = SqliteRecorder("unit_test.db")
prob.driver.add_recorder(recorder)
# We could also just use prob.driver.recording_options['includes']=['*'] here, but for large meshes the database file becomes extremely large. So we just select the variables we need.
prob.driver.recording_options['includes'] = [
'alpha',
'rho',
'v',
'cg',
'AS_point_1.cg',
'AS_point_0.cg',
'AS_point_0.coupled.wing_loads.loads',
'AS_point_1.coupled.wing_loads.loads',
'AS_point_0.coupled.wing.normals',
'AS_point_1.coupled.wing.normals',
'AS_point_0.coupled.wing.widths',
'AS_point_1.coupled.wing.widths',
'AS_point_0.coupled.aero_states.wing_sec_forces',
'AS_point_1.coupled.aero_states.wing_sec_forces',
'AS_point_0.wing_perf.CL1',
'AS_point_1.wing_perf.CL1',
'AS_point_0.coupled.wing.S_ref',
'AS_point_1.coupled.wing.S_ref',
'wing.geometry.twist',
'wing.mesh',
'wing.skin_thickness',
'wing.spar_thickness',
'wing.t_over_c',
'wing.structural_mass',
'AS_point_0.wing_perf.vonmises',
'AS_point_1.wing_perf.vonmises',
'AS_point_0.coupled.wing.def_mesh',
'AS_point_1.coupled.wing.def_mesh',
]
prob.driver.recording_options['record_objectives'] = True
prob.driver.recording_options['record_constraints'] = True
prob.driver.recording_options['record_desvars'] = True
prob.driver.recording_options['record_inputs'] = True
prob.model.add_objective('AS_point_0.fuelburn', scaler=1e-5)
prob.model.add_design_var('wing.twist_cp',
lower=-15.,
upper=15.,
scaler=0.1)
prob.model.add_design_var('wing.spar_thickness_cp',
lower=0.003,
upper=0.1,
scaler=1e2)
prob.model.add_design_var('wing.skin_thickness_cp',
lower=0.003,
upper=0.1,
scaler=1e2)
prob.model.add_design_var('wing.geometry.t_over_c_cp',
lower=0.07,
upper=0.2,
scaler=10.)
prob.model.add_design_var('fuel_mass',
lower=0.,
upper=2e5,
scaler=1e-5)
prob.model.add_design_var('alpha_maneuver', lower=-15., upper=15)
prob.model.add_constraint('AS_point_0.CL', equals=0.5)
prob.model.add_constraint('AS_point_1.L_equals_W', equals=0.)
prob.model.add_constraint('AS_point_1.wing_perf.failure', upper=0.)
prob.model.add_constraint('fuel_vol_delta.fuel_vol_delta', lower=0.)
prob.model.add_constraint('fuel_diff', equals=0.)
# Set up the problem
prob.setup()
prob.run_driver()
# print(prob['AS_point_0.fuelburn'][0])
# print(prob['wing.structural_mass'][0]/surf_dict['wing_weight_ratio'])
# print(prob['wing.geometry.t_over_c_cp'])
assert_rel_error(self, prob['AS_point_0.fuelburn'][0], 101937.827384,
1e-5)
assert_rel_error(
self,
prob['wing.structural_mass'][0] / surf_dict['wing_weight_ratio'],
36539.6437566, 1e-5)
assert_rel_error(
self, prob['wing.geometry.t_over_c_cp'],
np.array([
0.10247881, 0.08207636, 0.11114547, 0.13114547, 0.10207636,
0.09365598
]), 1e-5)
def test_brachistochrone_recording_for_docs(self):
import numpy as np
import matplotlib
matplotlib.use('Agg')
import matplotlib.pyplot as plt
from openmdao.api import Problem, Group, ScipyOptimizeDriver, DirectSolver, \
SqliteRecorder, CaseReader
from openmdao.utils.assert_utils import assert_rel_error
from dymos import Phase
from dymos.examples.brachistochrone.brachistochrone_ode import BrachistochroneODE
p = Problem(model=Group())
p.driver = ScipyOptimizeDriver()
phase = Phase('gauss-lobatto',
ode_class=BrachistochroneODE,
num_segments=10)
p.model.add_subsystem('phase0', phase)
phase.set_time_options(initial_bounds=(0, 0), duration_bounds=(.5, 10))
phase.set_state_options('x', fix_initial=True, fix_final=True)
phase.set_state_options('y', fix_initial=True, fix_final=True)
phase.set_state_options('v', fix_initial=True)
phase.add_control('theta',
units='deg',
rate_continuity=False,
lower=0.01,
upper=179.9)
phase.add_design_parameter('g', units='m/s**2', opt=False, val=9.80665)
# Minimize time at the end of the phase
phase.add_objective('time', loc='final', scaler=10)
p.model.linear_solver = DirectSolver(assemble_jac=True)
p.model.options['assembled_jac_type'] = 'csc'
# Recording
rec = SqliteRecorder('brachistochrone_solution.db')
p.driver.recording_options['record_desvars'] = True
p.driver.recording_options['record_responses'] = True
p.driver.recording_options['record_objectives'] = True
p.driver.recording_options['record_constraints'] = True
p.model.recording_options['record_metadata'] = True
p.driver.add_recorder(rec)
p.model.add_recorder(rec)
phase.add_recorder(rec)
p.setup()
p['phase0.t_initial'] = 0.0
p['phase0.t_duration'] = 2.0
p['phase0.states:x'] = phase.interpolate(ys=[0, 10],
nodes='state_input')
p['phase0.states:y'] = phase.interpolate(ys=[10, 5],
nodes='state_input')
p['phase0.states:v'] = phase.interpolate(ys=[0, 9.9],
nodes='state_input')
p['phase0.controls:theta'] = phase.interpolate(ys=[5, 100.5],
nodes='control_input')
# Solve for the optimal trajectory
p.run_driver()
# Test the results
assert_rel_error(self,
phase.get_values('time')[-1],
1.8016,
tolerance=1.0E-3)
cr = CaseReader('brachistochrone_solution.db')
outputs = dict([
(o[0], o[1])
for o in cr.list_outputs(units=True, shape=True, out_stream=None)
])
assert_rel_error(
self, p['phase0.controls:theta'],
outputs['phase0.indep_controls.controls:theta']['value'])
phase0_options = cr.system_metadata['phase0']['component_options']
num_segments = phase0_options['num_segments']
transcription_order = phase0_options['transcription_order']
segment_ends = phase0_options['segment_ends']
ode_class = phase0_options['ode_class']
print(num_segments)
print(transcription_order)
print(ode_class)
print(segment_ends)
def main(tot_iter):
objectives = {0: "compliance", 1: "stress"}
# TODO: folder path and restart # must be manually input each time
loadFolder = loadFolder0 + ""
restart_iter = 26
import os
try:
os.mkdir(loadFolder + 'restart_' + str(restart_iter))
except:
pass
try:
os.mkdir(loadFolder + 'restart_' + str(restart_iter) + '/figs')
except:
pass
inspctFlag = False
if tot_iter < 0:
inspctFlag = True
tot_iter = restart_iter + 1
# Select which problem to solve
obj_flag = 1
print(locals())
print("solving single physics %s problem" % objectives[obj_flag])
print("restarting from %d ..." % restart_iter)
fname0 = loadFolder + 'phi%03i.pkl' % restart_iter
with open(fname0, 'rb') as f:
raw = pickle.load(f)
phi0 = raw['phi']
fname0 = loadFolder0 + 'const.pkl'
with open(fname0, 'rb') as f:
raw = pickle.load(f)
# nodes = raw['mesh']
nodes = raw['nodes']
elem = raw['elem']
GF_e = raw['GF_e']
BCid_e = raw['BCid_e']
E = raw['E']
nu = raw['nu']
f = raw['f']
nelx = raw['nelx']
nely = raw['nely']
length_x = raw['length_x']
length_y = raw['length_y']
coord_e = raw['coord_e']
tol_e = raw['tol_e']
############################################################################
########################### FEA ###########################
############################################################################
# NB: only Q4 elements + integer-spaced mesh are assumed
ls2fe_x = length_x / float(nelx)
ls2fe_y = length_y / float(nely)
num_nodes_x = nelx + 1
num_nodes_y = nely + 1
nELEM = nelx * nely
nNODE = num_nodes_x * num_nodes_y
# Declare FEA object (OpenLSTO_FEA) ==============================
fea_solver = py_FEA(lx=length_x,
ly=length_y,
nelx=nelx,
nely=nely,
element_order=2)
[node, elem, elem_dof] = fea_solver.get_mesh()
## validate the mesh
if nELEM != elem.shape[0]:
error("error found in the element")
if nNODE != node.shape[0]:
error("error found in the node")
nDOF_e = nNODE * 2 # each node has two displacement DOFs
# constitutive properties ========================================
fea_solver.set_material(E=E, nu=nu, rho=1.0)
# Boundary Conditions ============================================
fea_solver.set_boundary(coord=coord_e, tol=tol_e)
BCid_e = fea_solver.get_boundary()
nDOF_e_wLag = nDOF_e + len(BCid_e) # elasticity DOF
############################################################################
########################### LSM ###########################
############################################################################
movelimit = 0.5
# Declare Level-set object
lsm_solver = py_LSM(nelx=nelx, nely=nely, moveLimit=movelimit)
lsm_solver.add_holes([], [], [])
lsm_solver.set_levelset()
lsm_solver.set_phi_re(phi0)
lsm_solver.reinitialise()
############################################################################
######################## T.O. LOOP ########################
############################################################################
for i_HJ in range(restart_iter, tot_iter):
(bpts_xy, areafraction, seglength) = lsm_solver.discretise()
# OpenMDAO ===================================================
## Define Group
if (objectives[obj_flag] == "compliance"):
model = ComplianceGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_e,
movelimit=movelimit,
BCid=BCid_e)
elif (objectives[obj_flag] == "stress"):
model = StressGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_e,
movelimit=movelimit,
pval=6.0,
BCid=BCid_e)
## Define problem for OpenMDAO object
prob = Problem(model)
## Setup the problem
prob.driver = pyOptSparseDriver()
prob.driver.options['optimizer'] = 'IPOPT'
prob.driver.opt_settings['linear_solver'] = 'ma27'
prob.setup(check=False)
prob.run_model()
## Total derivative using MAUD
if (objectives[obj_flag] == "compliance"):
ff = total['compliance_comp.compliance', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
elif (objectives[obj_flag] == "stress"):
ff = total['pnorm_comp.pnorm', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
## Assign object function sensitivities
nBpts = int(bpts_xy.shape[0])
Sf = -ff[:nBpts] # equal to M2DO-perturbation
Cf = np.multiply(
Sf, seglength) # Shape sensitivity (integral coefficients)
## Assign constraint sensitivities
Sg = -gg[:nBpts]
Sg[Sg <
-1.5] = -1.5 # apply caps (bracketing) to constraint sensitivities
Sg[Sg >
0.5] = 0.5 # apply caps (bracketing) to constraint sensitivities
Cg = np.multiply(
Sg, seglength) # Shape sensitivity (integral coefficients)
# Suboptimize ================================================
if 1:
suboptim = Solvers(bpts_xy=bpts_xy,
Sf=Sf,
Sg=Sg,
Cf=Cf,
Cg=Cg,
length_x=length_x,
length_y=length_y,
areafraction=areafraction,
movelimit=movelimit)
# suboptimization
if 1: # simplex
Bpt_Vel = suboptim.simplex(isprint=False)
else: # bisection..
Bpt_Vel = suboptim.bisection(isprint=False)
timestep = 1.0
elif 1: # works okay now.
bpts_sens = np.zeros((nBpts, 2))
# issue: scaling problem
#
bpts_sens[:, 0] = Sf
bpts_sens[:, 1] = Sg
lsm_solver.set_BptsSens(bpts_sens)
scales = lsm_solver.get_scale_factors()
(lb2, ub2) = lsm_solver.get_Lambda_Limits()
constraint_distance = (0.4 * nelx * nely) - areafraction.sum()
model = LSM2D_slpGroup(lsm_solver=lsm_solver,
num_bpts=nBpts,
b=ub2,
lb=lb2,
Sf=bpts_sens[:, 0],
Sg=bpts_sens[:, 1],
constraintDistance=constraint_distance,
movelimit=movelimit)
subprob = Problem(model)
subprob.setup()
subprob.driver = ScipyOptimizeDriver()
subprob.driver.options['optimizer'] = 'SLSQP'
subprob.driver.options['disp'] = True
subprob.driver.options['tol'] = 1e-10
subprob.run_driver()
lambdas = subprob['inputs_comp.lambdas']
displacements_ = subprob['displacement_comp.displacements']
displacements_[displacements_ > movelimit] = movelimit
displacements_[displacements_ < -movelimit] = -movelimit
timestep = 1.0 #abs(lambdas[0]*scales[0])
Bpt_Vel = displacements_ / timestep
# print(timestep)
del subprob
else: # branch: perturb-suboptim
bpts_sens = np.zeros((nBpts, 2))
# issue: scaling problem
#
bpts_sens[:, 0] = Sf
bpts_sens[:, 1] = Sg
lsm_solver.set_BptsSens(bpts_sens)
scales = lsm_solver.get_scale_factors()
(lb2, ub2) = lsm_solver.get_Lambda_Limits()
constraint_distance = (0.4 * nelx * nely) - areafraction.sum()
constraintDistance = np.array([constraint_distance])
scaled_constraintDist = lsm_solver.compute_scaledConstraintDistance(
constraintDistance)
def objF_nocallback(x):
displacement = lsm_solver.compute_displacement(x)
displacement_np = np.asarray(displacement)
return lsm_solver.compute_delF(displacement_np)
def conF_nocallback(x):
displacement = lsm_solver.compute_displacement(x)
displacement_np = np.asarray(displacement)
return lsm_solver.compute_delG(displacement_np,
scaled_constraintDist, 1)
cons = ({'type': 'eq', 'fun': lambda x: conF_nocallback(x)})
res = sp_optim.minimize(objF_nocallback,
np.zeros(2),
method='SLSQP',
options={'disp': True},
bounds=((lb2[0], ub2[0]), (lb2[1],
ub2[1])),
constraints=cons)
lambdas = res.x
displacements_ = lsm_solver.compute_unscaledDisplacement(lambdas)
displacements_[displacements_ > movelimit] = movelimit
displacements_[displacements_ < -movelimit] = -movelimit
timestep = 1.0 #abs(lambdas[0]*scales[0])
Bpt_Vel = displacements_ / timestep
# scaling
# Bpt_Vel = Bpt_Vel#/np.max(np.abs(Bpt_Vel))
lsm_solver.advect(Bpt_Vel, timestep)
lsm_solver.reinitialise()
if not inspctFlag: # quickplot
plt.figure(1)
plt.clf()
plt.scatter(bpts_xy[:, 0], bpts_xy[:, 1], 10)
plt.axis("equal")
plt.savefig(loadFolder + 'restart_' + str(restart_iter) + "/" +
"figs/bpts_%d.png" % i_HJ)
print('loop %d is finished' % i_HJ)
area = areafraction.sum() / (nelx * nely)
u = prob['disp_comp.disp']
compliance = np.dot(u, GF_e[:nDOF_e])
# Printing/Plotting ==========================================
if 1: # quickplot
plt.figure(1)
plt.clf()
plt.scatter(bpts_xy[:, 0], bpts_xy[:, 1], 10)
plt.axis("equal")
plt.savefig(loadFolder + 'restart_' + str(restart_iter) + "/" +
"figs/bpts_%d.png" % i_HJ)
if (objectives[obj_flag] == "compliance" and not inspctFlag):
compliance = prob['compliance_comp.compliance']
print(compliance, area)
fid = open(
loadFolder + 'restart_' + str(restart_iter) + "/" + "log.txt",
"a+")
fid.write(str(compliance) + ", " + str(area) + "\n")
fid.close()
elif (objectives[obj_flag] == "stress" and not inspctFlag):
print(prob['pnorm_comp.pnorm'][0], area)
fid = open(
loadFolder + 'restart_' + str(restart_iter) + "/" + "log.txt",
"a+")
fid.write(
str(prob['pnorm_comp.pnorm'][0]) + ", " + str(area) + "\n")
fid.close()
## Saving Phi
phi = lsm_solver.get_phi()
if not inspctFlag:
raw = {}
raw['phi'] = phi
filename = loadFolder + 'restart_' + str(
restart_iter) + '/' + 'phi%03i.pkl' % i_HJ
with open(filename, 'wb') as f:
pickle.dump(raw, f)
del model
del prob
mem = virtual_memory()
print(str(mem.available / 1024. / 1024. / 1024.) + "GB")
if mem.available / 1024. / 1024. / 1024. < 3.0:
print("memory explodes at iteration %3i " % i_HJ)
exit()
def test_debug_print_desvar_physical_with_indices(self):
prob = Problem()
model = prob.model = Group()
size = 3
model.add_subsystem('p1', IndepVarComp('x', np.array([50.0] * size)))
model.add_subsystem('p2', IndepVarComp('y', np.array([50.0] * size)))
model.add_subsystem(
'comp',
ExecComp('f_xy = (x-3.0)**2 + x*y + (y+4.0)**2 - 3.0',
x=np.zeros(size),
y=np.zeros(size),
f_xy=np.zeros(size)))
model.add_subsystem(
'con',
ExecComp('c = - x + y',
c=np.zeros(size),
x=np.zeros(size),
y=np.zeros(size)))
model.connect('p1.x', 'comp.x')
model.connect('p2.y', 'comp.y')
model.connect('p1.x', 'con.x')
model.connect('p2.y', 'con.y')
prob.set_solver_print(level=0)
prob.driver = ScipyOptimizeDriver()
prob.driver.options['optimizer'] = 'SLSQP'
prob.driver.options['tol'] = 1e-9
prob.driver.options['disp'] = False
model.add_design_var('p1.x',
indices=[1],
lower=-50.0,
upper=50.0,
ref=[
5.0,
])
model.add_design_var('p2.y', indices=[1], lower=-50.0, upper=50.0)
model.add_objective('comp.f_xy', index=1)
model.add_constraint('con.c', indices=[1], upper=-15.0)
prob.setup(check=False)
prob.driver.options['debug_print'] = [
'desvars',
]
stdout = sys.stdout
strout = StringIO()
sys.stdout = strout
try:
# formatting has changed in numpy 1.14 and beyond.
if LooseVersion(np.__version__) >= LooseVersion("1.14"):
with printoptions(precision=2, legacy="1.13"):
prob.run_driver()
else:
with printoptions(precision=2):
prob.run_driver()
finally:
sys.stdout = stdout
output = strout.getvalue().split('\n')
# should see unscaled (physical) and the full arrays, not just what is indicated by indices
self.assertEqual(
output[3],
"{'p1.x': array([ 50., 50., 50.]), 'p2.y': array([ 50., 50., 50.])}"
)
def test_betz(self):
from openmdao.api import Problem, ScipyOptimizeDriver, IndepVarComp, ExplicitComponent
class ActuatorDisc(ExplicitComponent):
"""Simple wind turbine model based on actuator disc theory"""
def setup(self):
# Inputs
self.add_input('a', 0.5, desc="Induced Velocity Factor")
self.add_input('Area',
10.0,
units="m**2",
desc="Rotor disc area")
self.add_input('rho',
1.225,
units="kg/m**3",
desc="air density")
self.add_input(
'Vu',
10.0,
units="m/s",
desc="Freestream air velocity, upstream of rotor")
# Outputs
self.add_output('Vr',
0.0,
units="m/s",
desc="Air velocity at rotor exit plane")
self.add_output(
'Vd',
0.0,
units="m/s",
desc="Slipstream air velocity, downstream of rotor")
self.add_output('Ct', 0.0, desc="Thrust Coefficient")
self.add_output('thrust',
0.0,
units="N",
desc="Thrust produced by the rotor")
self.add_output('Cp', 0.0, desc="Power Coefficient")
self.add_output('power',
0.0,
units="W",
desc="Power produced by the rotor")
self.declare_partials('Vr', ['a', 'Vu'])
self.declare_partials('Vd', 'a')
self.declare_partials('Ct', 'a')
self.declare_partials('thrust', ['a', 'Area', 'rho', 'Vu'])
self.declare_partials('Cp', 'a')
self.declare_partials('power', ['a', 'Area', 'rho', 'Vu'])
def compute(self, inputs, outputs):
""" Considering the entire rotor as a single disc that extracts
velocity uniformly from the incoming flow and converts it to
power."""
a = inputs['a']
Vu = inputs['Vu']
qA = .5 * inputs['rho'] * inputs['Area'] * Vu**2
outputs['Vd'] = Vd = Vu * (1 - 2 * a)
outputs['Vr'] = .5 * (Vu + Vd)
outputs['Ct'] = Ct = 4 * a * (1 - a)
outputs['thrust'] = Ct * qA
outputs['Cp'] = Cp = Ct * (1 - a)
outputs['power'] = Cp * qA * Vu
def compute_partials(self, inputs, J):
""" Jacobian of partial derivatives."""
a = inputs['a']
Vu = inputs['Vu']
Area = inputs['Area']
rho = inputs['rho']
# pre-compute commonly needed quantities
a_times_area = a * Area
one_minus_a = 1.0 - a
a_area_rho_vu = a_times_area * rho * Vu
J['Vr', 'a'] = -Vu
J['Vr', 'Vu'] = one_minus_a
J['Vd', 'a'] = -2.0 * Vu
J['Ct', 'a'] = 4.0 - 8.0 * a
J['thrust', 'a'] = .5 * rho * Vu**2 * Area * J['Ct', 'a']
J['thrust', 'Area'] = 2.0 * Vu**2 * a * rho * one_minus_a
J['thrust', 'rho'] = 2.0 * a_times_area * Vu**2 * (one_minus_a)
J['thrust', 'Vu'] = 4.0 * a_area_rho_vu * (one_minus_a)
J['Cp',
'a'] = 4.0 * a * (2.0 * a - 2.0) + 4.0 * (one_minus_a)**2
J['power', 'a'] = 2.0 * Area * Vu**3 * a * rho * (
2.0 * a - 2.0) + 2.0 * Area * Vu**3 * rho * one_minus_a**2
J['power', 'Area'] = 2.0 * Vu**3 * a * rho * one_minus_a**2
J['power',
'rho'] = 2.0 * a_times_area * Vu**3 * (one_minus_a)**2
J['power',
'Vu'] = 6.0 * Area * Vu**2 * a * rho * one_minus_a**2
# build the model
prob = Problem()
indeps = prob.model.add_subsystem('indeps',
IndepVarComp(),
promotes=['*'])
indeps.add_output('a', .5)
indeps.add_output('Area', 10.0, units='m**2')
indeps.add_output('rho', 1.225, units='kg/m**3')
indeps.add_output('Vu', 10.0, units='m/s')
prob.model.add_subsystem('a_disk',
ActuatorDisc(),
promotes_inputs=['a', 'Area', 'rho', 'Vu'])
# setup the optimization
prob.driver = ScipyOptimizeDriver()
prob.driver.options['optimizer'] = 'SLSQP'
prob.model.add_design_var('a', lower=0., upper=1.)
prob.model.add_design_var('Area', lower=0., upper=1.)
# negative one so we maximize the objective
prob.model.add_objective('a_disk.Cp', scaler=-1)
prob.setup()
prob.run_driver()
# minimum value
assert_rel_error(self, prob['a_disk.Cp'], 16. / 27., 1e-4)
assert_rel_error(self, prob['a'], 0.33333, 1e-4)
# There is a bug in scipy version < 1.0 that causes this value to be wrong.
if LooseVersion(scipy.__version__) >= LooseVersion("1.0"):
assert_rel_error(self, prob['Area'], 1.0, 1e-4)
else:
msg = "Outdated version of Scipy detected; this problem does not solve properly."
raise unittest.SkipTest(msg)
def test(self):
# Create a dictionary to store options about the surface
# OM: vary 'num_y' and 'num_x' to change the size of the mesh
mesh_dict = {
'num_y': 5,
'num_x': 2,
'wing_type': 'rect',
'symmetry': True
}
mesh = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name': 'wing', # name of the surface
'type': 'aerostruct',
'symmetry': True, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type': 'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type': 'tube',
'thickness_cp': np.array([.075, .075]),
'twist_cp': np.array([-10., 15.]),
'mesh': mesh,
'num_x': mesh.shape[0],
'num_y': mesh.shape[1],
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0': 0.0, # CL of the surface at alpha=0
'CD0': 0.015, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam': 0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp':
np.array([0.15]), # thickness over chord ratio (NACA0015)
'c_max_t': .303, # chordwise location of maximum (NACA0015)
# thickness
'with_viscous': True,
'with_wave': False, # if true, compute wave drag
# Structural values are based on aluminum 7075
'E': 70.e9, # [Pa] Young's modulus of the spar
'G': 30.e9, # [Pa] shear modulus of the spar
'yield':
500.e6 / 2.5, # [Pa] yield stress divided by 2.5 for limiting case
'mrho': 3.e3, # [kg/m^3] material density
'fem_origin': 0.35, # normalized chordwise location of the spar
'wing_weight_ratio': 2.,
'struct_weight_relief':
False, # True to add the weight of the structure to the loads on the structure
# Constraints
'exact_failure_constraint': False, # if false, use KS function
}
surfaces = [surf_dict]
# Create the problem and assign the model group
prob = Problem()
# Add problem information as an independent variables component
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=248.136, units='m/s')
indep_var_comp.add_output('alpha', val=9., units='deg')
indep_var_comp.add_output('M', val=0.84)
indep_var_comp.add_output('re', val=1.e6, units='1/m')
indep_var_comp.add_output('rho', val=0.38, units='kg/m**3')
indep_var_comp.add_output('CT', val=9.80665 * 17.e-6, units='1/s')
indep_var_comp.add_output('R', val=11.165e6, units='m')
indep_var_comp.add_output('W0', val=0.4 * 3e5, units='kg')
indep_var_comp.add_output('a', val=295.4, units='m/s')
indep_var_comp.add_output('load_factor', val=1.)
indep_var_comp.add_output('empty_cg', val=np.zeros((3)), units='m')
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
# Loop over each surface in the surfaces list
for surface in surfaces:
# Get the surface name and create a group to contain components
# only for this surface
name = surface['name']
aerostruct_group = Aerostruct(surface=surface)
# Add tmp_group to the problem with the name of the surface.
prob.model.add_subsystem(name, aerostruct_group)
# Loop through and add a certain number of aero points
for i in range(1):
point_name = 'AS_point_{}'.format(i)
# Connect the parameters within the model for each aero point
# Create the aero point group and add it to the model
AS_point = AerostructPoint(surfaces=surfaces)
prob.model.add_subsystem(point_name, AS_point)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v')
prob.model.connect('alpha', point_name + '.alpha')
prob.model.connect('M', point_name + '.M')
prob.model.connect('re', point_name + '.re')
prob.model.connect('rho', point_name + '.rho')
prob.model.connect('CT', point_name + '.CT')
prob.model.connect('R', point_name + '.R')
prob.model.connect('W0', point_name + '.W0')
prob.model.connect('a', point_name + '.a')
prob.model.connect('empty_cg', point_name + '.empty_cg')
prob.model.connect('load_factor', point_name + '.load_factor')
for surface in surfaces:
prob.model.connect('load_factor', name + '.load_factor')
com_name = point_name + '.' + name + '_perf'
prob.model.connect(name + '.K',
point_name + '.coupled.' + name + '.K')
# Connect aerodyamic mesh to coupled group mesh
prob.model.connect(name + '.mesh',
point_name + '.coupled.' + name + '.mesh')
prob.model.connect(
name + '.element_weights',
point_name + '.coupled.' + name + '.element_weights')
prob.model.connect(name + '.nodes',
point_name + '.coupled.' + name + '.nodes')
# Connect performance calculation variables
prob.model.connect(name + '.radius', com_name + '.radius')
prob.model.connect(name + '.thickness',
com_name + '.thickness')
prob.model.connect(name + '.nodes', com_name + '.nodes')
prob.model.connect(
name + '.cg_location',
point_name + '.' + 'total_perf.' + name + '_cg_location')
prob.model.connect(
name + '.structural_weight', point_name + '.' +
'total_perf.' + name + '_structural_weight')
prob.model.connect(name + '.t_over_c', com_name + '.t_over_c')
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['tol'] = 1e-9
# Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.twist_cp', lower=-10., upper=15.)
prob.model.add_design_var('wing.thickness_cp',
lower=0.01,
upper=0.5,
scaler=1e2)
prob.model.add_constraint('AS_point_0.wing_perf.failure', upper=0.)
prob.model.add_constraint('AS_point_0.wing_perf.thickness_intersects',
upper=0.)
# Add design variables, constraisnt, and objective on the problem
prob.model.add_design_var('alpha', lower=-10., upper=10.)
prob.model.add_constraint('AS_point_0.L_equals_W', equals=0.)
prob.model.add_objective('AS_point_0.fuelburn', scaler=1e-5)
# Set up the problem
prob.setup()
prob.run_driver()
assert_rel_error(self, prob['AS_point_0.fuelburn'][0],
72128.75170161888, 1e-5)
def test_brachistochrone_quick_start(self):
import numpy as np
from openmdao.api import Problem, Group, ScipyOptimizeDriver
import dymos as dm
import matplotlib
matplotlib.use('Agg')
import matplotlib.pyplot as plt
#
# Define the OpenMDAO problem
#
p = Problem(model=Group())
#
# Define a Trajectory object
#
traj = dm.Trajectory()
p.model.add_subsystem('traj', subsys=traj)
#
# Define a Dymos Phase object with GaussLobatto Transcription
#
phase = dm.Phase(ode_class=BrachistochroneODE,
transcription=dm.GaussLobatto(num_segments=10, order=3))
traj.add_phase(name='phase0', phase=phase)
#
# Set the time options
# Time has no targets in our ODE.
# We fix the initial time so that the it is not a design variable in the optimization.
# The duration of the phase is allowed to be optimized, but is bounded on [0.5, 10].
#
phase.set_time_options(fix_initial=True, duration_bounds=(0.5, 10.0), units='s')
#
# Set the time options
# Initial values of positions and velocity are all fixed.
# The final value of position are fixed, but the final velocity is a free variable.
# The equations of motion are not functions of position, so 'x' and 'y' have no targets.
# The rate source points to the output in the ODE which provides the time derivative of the
# given state.
phase.set_state_options('x', fix_initial=True, fix_final=True, units='m', rate_source='xdot')
phase.set_state_options('y', fix_initial=True, fix_final=True, units='m', rate_source='ydot')
phase.set_state_options('v', fix_initial=True, fix_final=False, units='m/s',
rate_source='vdot', targets=['v'])
# Define theta as a control.
phase.add_control(name='theta', units='rad', lower=0, upper=np.pi, targets=['theta'])
# Minimize final time.
phase.add_objective('time', loc='final')
# Set the driver.
p.driver = ScipyOptimizeDriver()
# Allow OpenMDAO to automatically determine our sparsity pattern.
# Doing so can significant speed up the execution of Dymos.
p.driver.options['dynamic_simul_derivs'] = True
# Setup the problem
p.setup(check=True)
# Now that the OpenMDAO problem is setup, we can set the values of the states.
p.set_val('traj.phase0.states:x',
phase.interpolate(ys=[0, 10], nodes='state_input'),
units='m')
p.set_val('traj.phase0.states:y',
phase.interpolate(ys=[10, 5], nodes='state_input'),
units='m')
p.set_val('traj.phase0.states:v',
phase.interpolate(ys=[0, 5], nodes='state_input'),
units='m/s')
p.set_val('traj.phase0.controls:theta',
phase.interpolate(ys=[90, 90], nodes='control_input'),
units='deg')
# Run the driver to solve the problem
p.run_driver()
# Check the validity of our results by using scipy.integrate.solve_ivp to
# integrate the solution.
sim_out = traj.simulate()
# Plot the results
fig, axes = plt.subplots(nrows=1, ncols=2, figsize=(12, 4.5))
axes[0].plot(p.get_val('traj.phase0.timeseries.states:x'),
p.get_val('traj.phase0.timeseries.states:y'),
'ro', label='solution')
axes[0].plot(sim_out.get_val('traj.phase0.timeseries.states:x'),
sim_out.get_val('traj.phase0.timeseries.states:y'),
'b-', label='simulation')
axes[0].set_xlabel('x (m)')
axes[0].set_ylabel('y (m/s)')
axes[0].legend()
axes[0].grid()
axes[1].plot(p.get_val('traj.phase0.timeseries.time'),
p.get_val('traj.phase0.timeseries.controls:theta', units='deg'),
'ro', label='solution')
axes[1].plot(sim_out.get_val('traj.phase0.timeseries.time'),
sim_out.get_val('traj.phase0.timeseries.controls:theta', units='deg'),
'b-', label='simulation')
axes[1].set_xlabel('time (s)')
axes[1].set_ylabel(r'$\theta$ (deg)')
axes[1].legend()
axes[1].grid()
plt.show()
def test_control_rate2_path_constraint_gl(self):
from openmdao.api import Problem, Group, ScipyOptimizeDriver, DirectSolver
from openmdao.utils.assert_utils import assert_rel_error
from dymos import Phase
from dymos.examples.brachistochrone.brachistochrone_ode import BrachistochroneODE
p = Problem(model=Group())
p.driver = ScipyOptimizeDriver()
phase = Phase('gauss-lobatto',
ode_class=BrachistochroneODE,
num_segments=10,
transcription_order=5)
p.model.add_subsystem('phase0', phase)
phase.set_time_options(initial_bounds=(0, 0), duration_bounds=(.5, 10))
phase.set_state_options('x', fix_initial=True, fix_final=True)
phase.set_state_options('y', fix_initial=True, fix_final=True)
phase.set_state_options('v', fix_initial=True)
phase.add_control('theta',
units='deg',
rate_continuity=False,
lower=0.01,
upper=179.9)
phase.add_design_parameter('g', units='m/s**2', opt=False, val=9.80665)
# Minimize time at the end of the phase
phase.add_objective('time', loc='final', scaler=10)
phase.add_path_constraint('theta_rate2',
lower=-200,
upper=200,
units='rad/s**2')
p.model.linear_solver = DirectSolver(assemble_jac=True)
p.model.options['assembled_jac_type'] = 'csc'
p.setup()
p['phase0.t_initial'] = 0.0
p['phase0.t_duration'] = 2.0
p['phase0.states:x'] = phase.interpolate(ys=[0, 10],
nodes='state_input')
p['phase0.states:y'] = phase.interpolate(ys=[10, 5],
nodes='state_input')
p['phase0.states:v'] = phase.interpolate(ys=[0, 9.9],
nodes='state_input')
p['phase0.controls:theta'] = phase.interpolate(ys=[5, 100.5],
nodes='control_input')
# Solve for the optimal trajectory
p.run_driver()
# Test the results
assert_rel_error(self,
phase.get_values('time')[-1],
1.8016,
tolerance=1.0E-3)
def main(maxiter):
# Select which problem to solve
obj_flag = 1
print(locals())
print("solving single physics %s problem" % objectives[obj_flag])
############################################################################
########################### FEA ###########################
############################################################################
# NB: only Q4 elements + integer-spaced mesh are assumed
nelx = 160
nely = 80
length_x = 160.
length_y = 80.
ls2fe_x = length_x / float(nelx)
ls2fe_y = length_y / float(nely)
num_nodes_x = nelx + 1
num_nodes_y = nely + 1
nELEM = nelx * nely
nNODE = num_nodes_x * num_nodes_y
# NB: nodes for plotting (quickfix...)
nodes = get_mesh(num_nodes_x, num_nodes_y, nelx, nely)
# Declare FEA object (OpenLSTO_FEA) ==============================
fea_solver = py_FEA(lx=length_x,
ly=length_y,
nelx=nelx,
nely=nely,
element_order=2)
[node, elem, elem_dof] = fea_solver.get_mesh()
## validate the mesh
if nELEM != elem.shape[0]:
error("error found in the element")
if nNODE != node.shape[0]:
error("error found in the node")
nDOF_e = nNODE * 2 # each node has two displacement DOFs
# constitutive properties ========================================
E = 1.
nu = 0.3
fea_solver.set_material(E=E, nu=nu, rho=1.0) # sets elastic material only
# Boundary Conditions ============================================
## Set elastic boundary conditions
coord_e = np.array([[0., 0.], [length_x, 0.]])
tol_e = np.array([[1e-3, 1e3], [1e-3, 1e+3]])
fea_solver.set_boundary(coord=coord_e, tol=tol_e)
BCid_e = fea_solver.get_boundary()
nDOF_e_wLag = nDOF_e + len(BCid_e) # elasticity DOF
# Loading Conditions =============================================
## Set the elastic loading conditions
coord = np.array([length_x * 0.5, 0.0]) # length_y])
tol = np.array([4.1, 1e-3])
load_val = -1 # dead load
GF_e_ = fea_solver.set_force(coord=coord,
tol=tol,
direction=1,
f=-load_val)
GF_e = np.zeros(nDOF_e_wLag)
GF_e[:nDOF_e] = GF_e_
############################################################################
########################### LSM ###########################
############################################################################
movelimit = 0.5
# Declare Level-set object
lsm_solver = py_LSM(nelx=nelx, nely=nely, moveLimit=movelimit)
# Assign holes ===================================================
if (int(nelx) / int(nely) == 2) and (nelx >= 80):
rad = float(nelx) / 32.0 # radius of the hole
x1 = nelx / 10. # x-coord of the center of the 1st hole 1st row
y1 = 14. * nely / 80. # y-coord of the center of the 1st row of holes
y2 = 27. * nely / 80. # y-coord of the center of the 2nd row of holes
y3 = nely / 2. # y-coord of the center of the 3rd row of holes
y4 = 53. * nely / 80. # y-coord of the center of the 4th row of holes
y5 = 66. * nely / 80. # y-coord of the center of the 5th row of holes
hole = array([[x1, y1, rad], [3 * x1, y1, rad], [5 * x1, y1, rad],
[7 * x1, y1, rad], [9 * x1, y1, rad], [2 * x1, y2, rad],
[4 * x1, y2, rad], [6 * x1, y2, rad], [8 * x1, y2, rad],
[x1, y3, rad], [3 * x1, y3, rad], [5 * x1, y3, rad],
[7 * x1, y3, rad], [9 * x1, y3, rad], [2 * x1, y4, rad],
[4 * x1, y4, rad], [6 * x1, y4, rad], [8 * x1, y4, rad],
[x1, y5, rad], [3 * x1, y5, rad], [5 * x1, y5, rad],
[7 * x1, y5, rad], [9 * x1, y5, rad]])
# NB: level set value at the corners should not be 0.0
hole = append(
hole,
[[0., 0., 0.1], [0., 80., 0.1], [160., 0., 0.1], [160., 80., 0.1]],
axis=0)
lsm_solver.add_holes(locx=list(hole[:, 0]),
locy=list(hole[:, 1]),
radius=list(hole[:, 2]))
else:
lsm_solver.add_holes([], [], [])
lsm_solver.set_levelset()
############################################################################
######################## T.O. LOOP ########################
############################################################################
for i_HJ in range(maxiter):
(bpts_xy, areafraction, seglength) = lsm_solver.discretise()
# OpenMDAO ===================================================
## Define Group
if (objectives[obj_flag] == "compliance"):
model = ComplianceGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_e,
movelimit=movelimit,
BCid=BCid_e)
elif (objectives[obj_flag] == "stress"):
model = StressGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_e,
movelimit=movelimit,
pval=6.0,
BCid=BCid_e)
## Define problem for OpenMDAO object
prob = Problem(model)
## Setup the problem
prob.driver = pyOptSparseDriver()
prob.driver.options['optimizer'] = 'IPOPT'
prob.driver.opt_settings['linear_solver'] = 'ma27'
prob.setup(check=False)
prob.run_model()
## Total derivative using MAUD
total = prob.compute_totals()
if (objectives[obj_flag] == "compliance"):
ff = total['compliance_comp.compliance', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
elif (objectives[obj_flag] == "stress"):
ff = total['pnorm_comp.pnorm', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
## Assign object function sensitivities
nBpts = int(bpts_xy.shape[0])
Sf = -ff[:nBpts] # equal to M2DO-perturbation
Cf = np.multiply(
Sf, seglength) # Shape sensitivity (integral coefficients)
## Assign constraint sensitivities
Sg = -gg[:nBpts]
Sg[Sg <
-1.5] = -1.5 # apply caps (bracketing) to constraint sensitivities
Sg[Sg >
0.5] = 0.5 # apply caps (bracketing) to constraint sensitivities
Cg = np.multiply(
Sg, seglength) # Shape sensitivity (integral coefficients)
# Suboptimize ================================================
if 1:
suboptim = Solvers(bpts_xy=bpts_xy,
Sf=Sf,
Sg=Sg,
Cf=Cf,
Cg=Cg,
length_x=length_x,
length_y=length_y,
areafraction=areafraction,
movelimit=movelimit)
# suboptimization
if 1: # simplex
Bpt_Vel = suboptim.simplex(isprint=False)
else: # bisection.
Bpt_Vel = suboptim.bisection(isprint=False)
timestep = 1.0
np.savetxt('a.txt', Bpt_Vel)
elif 1: # works when Sf <- Sf / length is used (which means Cf <- actual Sf)
bpts_sens = np.zeros((nBpts, 2))
# issue: scaling problem
#
bpts_sens[:, 0] = Sf
bpts_sens[:, 1] = Sg
lsm_solver.set_BptsSens(bpts_sens)
scales = lsm_solver.get_scale_factors()
(lb2, ub2) = lsm_solver.get_Lambda_Limits()
constraint_distance = (0.4 * nelx * nely) - areafraction.sum()
model = LSM2D_slpGroup(lsm_solver=lsm_solver,
num_bpts=nBpts,
ub=ub2,
lb=lb2,
Sf=bpts_sens[:, 0],
Sg=bpts_sens[:, 1],
constraintDistance=constraint_distance,
movelimit=movelimit)
subprob = Problem(model)
subprob.setup()
subprob.driver = ScipyOptimizeDriver()
subprob.driver.options['optimizer'] = 'SLSQP'
subprob.driver.options['disp'] = True
subprob.driver.options['tol'] = 1e-10
subprob.run_driver()
lambdas = subprob['inputs_comp.lambdas']
displacements_ = subprob['displacement_comp.displacements']
# displacements_[displacements_ > movelimit] = movelimit
# displacements_[displacements_ < -movelimit] = -movelimit
timestep = abs(lambdas[0] * scales[0])
Bpt_Vel = displacements_ / timestep
np.savetxt('a.txt', Bpt_Vel)
# print(timestep)
del subprob
else: # branch: perturb-suboptim
bpts_sens = np.zeros((nBpts, 2))
# issue: scaling problem
#
bpts_sens[:, 0] = Sf
bpts_sens[:, 1] = Sg
lsm_solver.set_BptsSens(bpts_sens)
scales = lsm_solver.get_scale_factors()
(lb2, ub2) = lsm_solver.get_Lambda_Limits()
constraint_distance = (0.4 * nelx * nely) - areafraction.sum()
constraintDistance = np.array([constraint_distance])
scaled_constraintDist = lsm_solver.compute_scaledConstraintDistance(
constraintDistance)
def objF_nocallback(x):
displacement = lsm_solver.compute_displacement(x)
displacement_np = np.asarray(displacement)
return lsm_solver.compute_delF(displacement_np)
def conF_nocallback(x):
displacement = lsm_solver.compute_displacement(x)
displacement_np = np.asarray(displacement)
return lsm_solver.compute_delG(displacement_np,
scaled_constraintDist, 1)
cons = ({'type': 'eq', 'fun': lambda x: conF_nocallback(x)})
res = sp_optim.minimize(objF_nocallback,
np.zeros(2),
method='SLSQP',
options={'disp': True},
bounds=((lb2[0], ub2[0]), (lb2[1],
ub2[1])),
constraints=cons)
lambdas = res.x
displacements_ = lsm_solver.compute_unscaledDisplacement(lambdas)
displacements_[displacements_ > movelimit] = movelimit
displacements_[displacements_ < -movelimit] = -movelimit
timestep = 1.0 #abs(lambdas[0]*scales[0])
Bpt_Vel = displacements_ / timestep
# scaling
# Bpt_Vel = Bpt_Vel#/np.max(np.abs(Bpt_Vel))
lsm_solver.advect(Bpt_Vel, timestep)
lsm_solver.reinitialise()
print('loop %d is finished' % i_HJ)
area = areafraction.sum() / (nelx * nely)
u = prob['disp_comp.disp']
compliance = np.dot(u, GF_e[:nDOF_e])
# Printing/Plotting ==========================================
if 1: # quickplot
plt.figure(1)
plt.clf()
plt.scatter(bpts_xy[:, 0], bpts_xy[:, 1], 10)
plt.axis("equal")
plt.savefig(saveFolder + "figs/bpts_%d.png" % i_HJ)
# print([compliance[0], area])
if (objectives[obj_flag] == "compliance"):
compliance = prob['compliance_comp.compliance']
print(compliance, area)
fid = open(saveFolder + "log.txt", "a+")
fid.write(str(compliance) + ", " + str(area) + "\n")
fid.close()
elif (objectives[obj_flag] == "stress"):
print(prob['pnorm_comp.pnorm'][0], area)
fid = open(saveFolder + "log.txt", "a+")
fid.write(
str(prob['pnorm_comp.pnorm'][0]) + ", " + str(area) + "\n")
fid.close()
## Saving phi
phi = lsm_solver.get_phi()
if i_HJ == 0:
raw = {}
raw['mesh'] = nodes
raw['nodes'] = nodes
raw['elem'] = elem
raw['GF_e'] = GF_e
raw['BCid_e'] = BCid_e
raw['E'] = E
raw['nu'] = nu
raw['f'] = load_val
raw['nelx'] = nelx
raw['nely'] = nely
raw['length_x'] = length_x
raw['length_y'] = length_y
raw['coord_e'] = coord_e
raw['tol_e'] = tol_e
filename = saveFolder + 'const.pkl'
with open(filename, 'wb') as f:
pickle.dump(raw, f)
raw = {}
raw['phi'] = phi
filename = saveFolder + 'phi%03i.pkl' % i_HJ
with open(filename, 'wb') as f:
pickle.dump(raw, f)
del model
del prob
mem = virtual_memory()
print(str(mem.available / 1024. / 1024. / 1024.) + "GB")
if mem.available / 1024. / 1024. / 1024. < 3.0:
print("memory explodes at iteration %3i " % i_HJ)
return ()
def test(self):
import numpy as np
from openaerostruct.geometry.utils import generate_mesh
from openaerostruct.geometry.geometry_group import Geometry
from openaerostruct.integration.aerostruct_groups import Aerostruct, AerostructPoint
from openmdao.api import IndepVarComp, Problem, Group, SqliteRecorder
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 5,
'num_x': 2,
'wing_type': 'CRM',
'symmetry': True,
'num_twist_cp': 5
}
mesh, twist_cp = generate_mesh(mesh_dict)
surface = {
# Wing definition
'name': 'wing', # name of the surface
'type': 'aerostruct',
'symmetry': True, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type': 'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type': 'tube',
'thickness_cp': np.array([.1, .2, .3]),
'twist_cp': twist_cp,
'mesh': mesh,
'num_x': mesh.shape[0],
'num_y': mesh.shape[1],
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0': 0.0, # CL of the surface at alpha=0
'CD0': 0.015, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam': 0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c': 0.15, # thickness over chord ratio (NACA0015)
'c_max_t': .303, # chordwise location of maximum (NACA0015)
# thickness
'with_viscous': True,
# Structural values are based on aluminum 7075
'E': 70.e9, # [Pa] Young's modulus of the spar
'G': 30.e9, # [Pa] shear modulus of the spar
'yield':
500.e6 / 2.5, # [Pa] yield stress divided by 2.5 for limiting case
'mrho': 3.e3, # [kg/m^3] material density
'fem_origin': 0.35, # normalized chordwise location of the spar
'wing_weight_ratio': 2.,
# Constraints
'exact_failure_constraint': False, # if false, use KS function
}
# Create the problem and assign the model group
prob = Problem()
# Add problem information as an independent variables component
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=248.136, units='m/s')
indep_var_comp.add_output('alpha', val=5.)
indep_var_comp.add_output('M', val=0.84)
indep_var_comp.add_output('re', val=1.e6, units='1/m')
indep_var_comp.add_output('rho', val=0.38, units='kg/m**3')
indep_var_comp.add_output('CT', val=9.80665 * 17.e-6, units='1/s')
indep_var_comp.add_output('R', val=11.165e6, units='m')
indep_var_comp.add_output('W0', val=0.4 * 3e5, units='kg')
indep_var_comp.add_output('a', val=295.4, units='m/s')
indep_var_comp.add_output('load_factor', val=1.)
indep_var_comp.add_output('empty_cg', val=np.zeros((3)), units='m')
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
aerostruct_group = Aerostruct(surface=surface)
name = 'wing'
# Add tmp_group to the problem with the name of the surface.
prob.model.add_subsystem(name,
aerostruct_group,
promotes_inputs=['load_factor'])
point_name = 'AS_point_0'
# Create the aero point group and add it to the model
AS_point = AerostructPoint(surfaces=[surface])
prob.model.add_subsystem(point_name,
AS_point,
promotes_inputs=[
'v', 'alpha', 'M', 're', 'rho', 'CT', 'R',
'W0', 'a', 'empty_cg', 'load_factor'
])
com_name = point_name + '.' + name + '_perf'
prob.model.connect(name + '.K', point_name + '.coupled.' + name + '.K')
# Connect aerodyamic mesh to coupled group mesh
prob.model.connect(name + '.mesh',
point_name + '.coupled.' + name + '.mesh')
prob.model.connect(
name + '.element_weights',
point_name + '.coupled.' + name + '.element_weights')
# Connect performance calculation variables
prob.model.connect(name + '.radius', com_name + '.radius')
prob.model.connect(name + '.thickness', com_name + '.thickness')
prob.model.connect(name + '.nodes', com_name + '.nodes')
prob.model.connect(
name + '.cg_location',
point_name + '.' + 'total_perf.' + name + '_cg_location')
prob.model.connect(
name + '.structural_weight',
point_name + '.' + 'total_perf.' + name + '_structural_weight')
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['tol'] = 1e-9
recorder = SqliteRecorder("aerostruct.db")
prob.driver.add_recorder(recorder)
prob.driver.recording_options['record_derivatives'] = True
# Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.twist_cp', lower=-10., upper=15.)
prob.model.add_design_var('wing.thickness_cp',
lower=0.01,
upper=0.5,
scaler=1e2)
prob.model.add_constraint('AS_point_0.wing_perf.failure', upper=0.)
prob.model.add_constraint('AS_point_0.wing_perf.thickness_intersects',
upper=0.)
# Add design variables, constraisnt, and objective on the problem
prob.model.add_design_var('alpha', lower=-10., upper=10.)
prob.model.add_constraint('AS_point_0.L_equals_W', equals=0.)
prob.model.add_objective('AS_point_0.fuelburn', scaler=1e-5)
# Set up the problem
prob.setup(check=True)
prob.run_driver()
assert_rel_error(self, prob['AS_point_0.fuelburn'][0],
104400.0251030171, 1e-8)
def main(maxiter):
# select which problem to solve
obj_flag = 1
print(locals())
print("solving %s problem" % objectives[obj_flag])
########################################################
################# FEA ####################
########################################################
# NB: only Q4 elements + integer-spaced mesh are assumed
nelx = 160
nely = 80
length_x = 160.
length_y = 80.
ls2fe_x = length_x / float(nelx)
ls2fe_y = length_y / float(nely)
num_nodes_x = nelx + 1
num_nodes_y = nely + 1
nELEM = nelx * nely
nNODE = num_nodes_x * num_nodes_y
# NB: nodes for plotting (quickfix...)
nodes = get_mesh(num_nodes_x, num_nodes_y, nelx, nely)
# Declare FEA object (OpenLSTO_FEA) ======================
fea_solver = py_FEA(lx=length_x,
ly=length_y,
nelx=nelx,
nely=nely,
element_order=2)
[node, elem, elem_dof] = fea_solver.get_mesh()
# validate the mesh
if nELEM != elem.shape[0]:
error("error found in the element")
if nNODE != node.shape[0]:
error("error found in the node")
nDOF_t = nNODE * 1 # each node has one temperature DOF
nDOF_e = nNODE * 2 # each node has two displacement DOFs
# constitutive properties =================================
E = 1.
nu = 0.3
f = -1 # dead load
K_cond = 0.1 # thermal conductivity
alpha = 1e-5 # thermal expansion coefficient
fea_solver.set_material(E=E, nu=nu, rho=1.0)
# Boundary Conditions =====================================
if 1:
coord_e = np.array([[0., 0.], [length_x, 0.]])
tol_e = np.array([[1e-3, 1e3], [1e-3, 1e+3]])
fea_solver.set_boundary(coord=coord_e, tol=tol_e)
BCid_e = fea_solver.get_boundary()
nDOF_e_wLag = nDOF_e + len(BCid_e) # elasticity DOF
coord = np.array([length_x * 0.5, 0.0]) # length_y])
tol = np.array([0.1, 1e-3])
GF_e_ = fea_solver.set_force(coord=coord, tol=tol, direction=1, f=-f)
GF_e = np.zeros(nDOF_e_wLag)
GF_e[:nDOF_e] = GF_e_
else: # cantilever bending
coord_e = np.array([[0, 0]])
tol_e = np.array([[1e-3, 1e10]])
fea_solver.set_boundary(coord=coord_e, tol=tol_e)
BCid_e = fea_solver.get_boundary()
nDOF_e_wLag = nDOF_e + len(BCid_e) # elasticity DOF
coord = np.array([length_x, length_y / 2])
tol = np.array([0.1, 0.1])
GF_e_ = fea_solver.set_force(coord=coord, tol=tol, direction=1, f=-1.0)
GF_e = np.zeros(nDOF_e_wLag)
GF_e[:nDOF_e] = GF_e_
xlo = np.array(range(0, nNODE, num_nodes_x))
xhi = np.array(range(nelx, nNODE, num_nodes_x))
# xfix = np.array([num_nodes_x*(nely/2-1), num_nodes_x*nely/2,
# num_nodes_x*(nely/2-1) + nelx, num_nodes_x*nely/2 + nelx])
xfix = np.append(xlo, xhi)
yfix = np.array(range(num_nodes_x * nely + 70, nNODE - 70))
# yloid = np.array(range(70, 91))
# fixID_d = np.append(xfix, yfix)
#fixID_d = np.unique(fixID_d)
#fixID = np.append(fixID_d, arange(70, 91))
# BCid_t = np.array(np.append(xfix, arange(70,91)), dtype=int)
BCid_t = np.array(np.append(yfix, arange(70, 91)), dtype=int)
nDOF_t_wLag = nDOF_t + len(BCid_t) # temperature DOF (zero temp)
GF_t = np.zeros(nDOF_t_wLag) # FORCE_HEAT (NB: Q matrix)
for ee in range(nELEM): # between element 70 to 91
GF_t[elem[ee]] += 10. # heat generation
GF_t[BCid_t] = 0.0
GF_t /= np.sum(GF_t)
#GF_t[nDOF_t:nDOF_t+len(fixID_d)+1] = 100.
# GF_t[:] = 0.0
########################################################
################# LSM ####################
########################################################
movelimit = 0.5
# Declare Level-set object
lsm_solver = py_LSM(nelx=nelx, nely=nely, moveLimit=movelimit)
if ((nelx == 160) and (nely == 80)): # 160 x 80 case
hole = array(
[[16, 14, 5], [48, 14, 5], [80, 14, 5], [112, 14, 5], [144, 14, 5],
[32, 27, 5], [64, 27, 5], [96, 27, 5], [128, 27, 5], [16, 40, 5],
[48, 40, 5], [80, 40, 5], [112, 40, 5], [144, 40, 5], [32, 53, 5],
[64, 53, 5], [96, 53, 5], [128, 53, 5], [16, 66, 5], [48, 66, 5],
[80, 66, 5], [112, 66, 5], [144, 66, 5]],
dtype=float)
# NB: level set value at the corners should not be 0.0
hole = append(
hole,
[[0., 0., 0.1], [0., 80., 0.1], [160., 0., 0.1], [160., 80., 0.1]],
axis=0)
lsm_solver.add_holes(locx=list(hole[:, 0]),
locy=list(hole[:, 1]),
radius=list(hole[:, 2]))
elif ((nelx == 80) and (nely == 40)):
hole = np.array(
[[8, 7, 2.5], [24, 7, 2.5], [40, 7, 2.5], [56, 7, 2.5],
[72, 7, 2.5], [16, 13.5, 2.5], [32, 13.5, 2.5], [48, 13.5, 2.5],
[64, 13.5, 2.5], [8, 20, 2.5], [24, 20, 2.5], [40, 20, 2.5],
[56, 20, 2.5], [72, 20, 2.5], [16, 26.5, 2.5], [32, 26.5, 2.5],
[48, 26.5, 2.5], [64, 26.5, 2.5], [8, 33, 2.5], [24, 33, 2.5],
[40, 33, 2.5], [56, 33, 2.5], [72, 33, 2.5]],
dtype=np.float)
# NB: level set value at the corners should not be 0.0
hole = append(
hole,
[[0., 0., 0.1], [0., 40., 0.1], [80., 0., 0.1], [80., 40., 0.1]],
axis=0)
lsm_solver.add_holes(locx=list(hole[:, 0]),
locy=list(hole[:, 1]),
radius=list(hole[:, 2]))
else:
lsm_solver.add_holes([], [], [])
lsm_solver.set_levelset()
for i_HJ in range(maxiter):
(bpts_xy, areafraction, seglength) = lsm_solver.discretise()
########################################################
############### OpenMDAO ################
########################################################
# Declare Group
if (objectives[obj_flag] == "compliance"):
model = ComplianceGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_e,
movelimit=movelimit,
BCid=BCid_e)
elif (objectives[obj_flag] == "stress"):
# TODO: sensitivity has not been verified yet
model = StressGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_e,
movelimit=movelimit,
pval=5.0,
E=E,
nu=nu)
elif (objectives[obj_flag] == "conduction"):
model = ConductionGroup(fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force=GF_t,
movelimit=movelimit,
K_cond=K_cond,
BCid=BCid_t)
elif (objectives[obj_flag] == "coupled_heat"):
model = HeatCouplingGroup(
fea_solver=fea_solver,
lsm_solver=lsm_solver,
nelx=nelx,
nely=nely,
force_e=GF_e,
force_t=GF_t,
movelimit=movelimit,
K_cond=K_cond,
BCid_e=BCid_e,
BCid_t=BCid_t,
E=E,
nu=nu,
alpha=alpha,
w=0.9
) # if w = 0.0, thermoelastic + conduction, if w = 1.0, conduction only
# One Problem per one OpenMDAO object
prob = Problem(model)
# optimize ...
prob.driver = pyOptSparseDriver()
prob.driver.options['optimizer'] = 'IPOPT'
prob.driver.opt_settings['linear_solver'] = 'ma27'
prob.setup(check=False)
if i_HJ == 0:
view_model(prob)
prob.run_model()
# Total derivative using MAUD =====================
total = prob.compute_totals()
if (objectives[obj_flag] == "compliance"):
ff = total['compliance_comp.compliance', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
elif (objectives[obj_flag] == "stress"):
ff = total['pnorm_comp.pnorm', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
elif (objectives[obj_flag] == "conduction"):
ff = total['compliance_comp.compliance', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
elif (objectives[obj_flag] == "coupled_heat"):
ff = total['objective_comp.y', 'inputs_comp.Vn'][0]
gg = total['weight_comp.weight', 'inputs_comp.Vn'][0]
nBpts = int(bpts_xy.shape[0])
# # WIP checking sensitivity 10/23
Sf = -ff[:nBpts] # equal to M2DO-perturbation
Cf = np.multiply(Sf, seglength)
#np.savetxt('/home/hayoung/Desktop/a',Sf)
#exit()
Sg = -gg[:nBpts]
Cg = np.multiply(Sf, seglength)
# ## WIP
# previous ver.
# Cf = -ff[:nBpts]
# Cg = -gg[:nBpts]
# Sf = np.divide(Cf, seglength)
# Sg = np.divide(Cg, seglength)
# bracketing Sf and Sg
Sg[Sg < -1.5] = -1.5
Sg[Sg > 0.5] = 0.5
# Sg[:] = -1.0
Cg = np.multiply(Sg, seglength)
########################################################
############## suboptimize ################
########################################################
if 1:
suboptim = Solvers(bpts_xy=bpts_xy,
Sf=Sf,
Sg=Sg,
Cf=Cf,
Cg=Cg,
length_x=length_x,
length_y=length_y,
areafraction=areafraction,
movelimit=movelimit)
# suboptimization
if 1: # simplex
Bpt_Vel = suboptim.simplex(isprint=False)
else: # bisection..
Bpt_Vel = suboptim.bisection(isprint=False)
timestep = 1.0
np.savetxt('a.txt', Bpt_Vel)
elif 1: # works when Sf <- Sf / length is used (which means Cf <- actual Sf)
bpts_sens = np.zeros((nBpts, 2))
# issue: scaling problem
#
bpts_sens[:, 0] = Sf
bpts_sens[:, 1] = Sg
lsm_solver.set_BptsSens(bpts_sens)
scales = lsm_solver.get_scale_factors()
(lb2, ub2) = lsm_solver.get_Lambda_Limits()
constraint_distance = (0.4 * nelx * nely) - areafraction.sum()
model = LSM2D_slpGroup(lsm_solver=lsm_solver,
num_bpts=nBpts,
ub=ub2,
lb=lb2,
Sf=bpts_sens[:, 0],
Sg=bpts_sens[:, 1],
constraintDistance=constraint_distance,
movelimit=movelimit)
subprob = Problem(model)
subprob.setup()
subprob.driver = ScipyOptimizeDriver()
subprob.driver.options['optimizer'] = 'SLSQP'
subprob.driver.options['disp'] = True
subprob.driver.options['tol'] = 1e-10
subprob.run_driver()
lambdas = subprob['inputs_comp.lambdas']
displacements_ = subprob['displacement_comp.displacements']
# displacements_[displacements_ > movelimit] = movelimit
# displacements_[displacements_ < -movelimit] = -movelimit
timestep = abs(lambdas[0] * scales[0])
Bpt_Vel = displacements_ / timestep
np.savetxt('a.txt', Bpt_Vel)
# print(timestep)
del subprob
else: # branch: perturb-suboptim
bpts_sens = np.zeros((nBpts, 2))
# issue: scaling problem
#
bpts_sens[:, 0] = Sf
bpts_sens[:, 1] = Sg
lsm_solver.set_BptsSens(bpts_sens)
scales = lsm_solver.get_scale_factors()
(lb2, ub2) = lsm_solver.get_Lambda_Limits()
constraint_distance = (0.4 * nelx * nely) - areafraction.sum()
constraintDistance = np.array([constraint_distance])
scaled_constraintDist = lsm_solver.compute_scaledConstraintDistance(
constraintDistance)
def objF_nocallback(x):
displacement = lsm_solver.compute_displacement(x)
displacement_np = np.asarray(displacement)
return lsm_solver.compute_delF(displacement_np)
def conF_nocallback(x):
displacement = lsm_solver.compute_displacement(x)
displacement_np = np.asarray(displacement)
return lsm_solver.compute_delG(displacement_np,
scaled_constraintDist, 1)
cons = ({'type': 'eq', 'fun': lambda x: conF_nocallback(x)})
res = sp_optim.minimize(objF_nocallback,
np.zeros(2),
method='SLSQP',
options={'disp': True},
bounds=((lb2[0], ub2[0]), (lb2[1],
ub2[1])),
constraints=cons)
lambdas = res.x
displacements_ = lsm_solver.compute_unscaledDisplacement(lambdas)
displacements_[displacements_ > movelimit] = movelimit
displacements_[displacements_ < -movelimit] = -movelimit
timestep = 1.0 #abs(lambdas[0]*scales[0])
Bpt_Vel = displacements_ / timestep
# scaling
# Bpt_Vel = Bpt_Vel#/np.max(np.abs(Bpt_Vel))
lsm_solver.advect(Bpt_Vel, timestep)
lsm_solver.reinitialise()
print('loop %d is finished' % i_HJ)
area = areafraction.sum() / (nelx * nely)
try:
u = prob['temp_comp.disp']
compliance = np.dot(u, GF_t[:nNODE])
except:
u = prob['disp_comp.disp']
# compliance = np.dot(u, GF_e[:nDOF_e])
pass
if 1: # quickplot
plt.figure(1)
plt.clf()
plt.scatter(bpts_xy[:, 0], bpts_xy[:, 1], 10)
plt.axis("equal")
plt.savefig(saveFolder + "figs/bpts_%d.png" % i_HJ)
if obj_flag == 3 or obj_flag == 2:
plt.figure(2)
plt.clf()
[xx, yy] = np.meshgrid(range(0, 161), range(0, 81))
plt.contourf(xx, yy, np.reshape(u, [81, 161]))
plt.colorbar()
plt.axis("equal")
plt.scatter(bpts_xy[:, 0], bpts_xy[:, 1], 5)
plt.savefig(saveFolder + "figs/temp_%d.png" % i_HJ)
# print([compliance[0], area])
if (objectives[obj_flag] == "compliance"):
compliance = prob['compliance_comp.compliance']
print(compliance, area)
fid = open(saveFolder + "log.txt", "a+")
fid.write(str(compliance) + ", " + str(area) + "\n")
fid.close()
elif (objectives[obj_flag] == "stress"):
print(prob['pnorm_comp.pnorm'][0], area)
fid = open(saveFolder + "log.txt", "a+")
fid.write(
str(prob['pnorm_comp.pnorm'][0]) + ", " + str(area) + "\n")
fid.close()
elif (objectives[obj_flag] == "coupled_heat"):
obj1 = prob['objective_comp.x1'][0]
obj2 = prob['objective_comp.x2'][0]
obj = prob['objective_comp.y'][0]
print([obj1, obj2, obj, area])
fid = open(saveFolder + "log.txt", "a+")
fid.write(
str(obj1) + ", " + str(obj2) + ", " + str(obj) + ", " +
str(area) + "\n")
fid.close()
# Saving Phi
phi = lsm_solver.get_phi()
if i_HJ == 0:
raw = {}
raw['mesh'] = nodes
raw['nodes'] = nodes
raw['elem'] = elem
raw['GF_e'] = GF_e
raw['GF_t'] = GF_t
raw['BCid_e'] = BCid_e
raw['BCid_t'] = BCid_t
raw['E'] = E
raw['nu'] = nu
raw['f'] = f
raw['K_cond'] = K_cond
raw['alpha'] = alpha
raw['nelx'] = nelx
raw['nely'] = nely
raw['length_x'] = length_x
raw['length_y'] = length_y
raw['coord_e'] = coord_e
raw['tol_e'] = tol_e
filename = saveFolder + 'const.pkl'
with open(filename, 'wb') as f:
pickle.dump(raw, f)
raw = {}
raw['phi'] = phi
if obj_flag == 3:
raw['T'] = prob['temp_comp.disp']
filename = saveFolder + 'phi%03i.pkl' % i_HJ
with open(filename, 'wb') as f:
pickle.dump(raw, f)
del model
del prob
mem = virtual_memory()
print(str(mem.available / 1024. / 1024. / 1024.) + "GB")
if mem.available / 1024. / 1024. / 1024. < 3.0:
print("memory explodes at iteration %3i " % i_HJ)
return ()
def test(self):
# Create a dictionary to store options about the surface
mesh_dict = {
'num_y': 5,
'num_x': 3,
'wing_type': 'CRM',
'symmetry': True,
'num_twist_cp': 5,
'span_cos_spacing': 0.
}
mesh, twist_cp = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name': 'wing', # name of the surface
'symmetry': True, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type': 'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type': 'tube',
'mesh': mesh,
'twist_cp': twist_cp,
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0': 0.0, # CL of the surface at alpha=0
'CD0': 0.015, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam': 0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp':
np.array([0.15]), # thickness over chord ratio (NACA0015)
'c_max_t': .303, # chordwise location of maximum (NACA0015)
# thickness
'with_viscous': True, # if true, compute viscous drag
'with_wave': False, # if true, compute wave drag
'span': 10.
}
surfaces = [surf_dict]
n_points = 2
# Create the problem and the model group
prob = Problem()
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=248.136, units='m/s')
indep_var_comp.add_output('alpha', val=6.64, units='deg')
indep_var_comp.add_output('Mach_number', val=0.84)
indep_var_comp.add_output('re', val=1.e6, units='1/m')
indep_var_comp.add_output('rho', val=0.38, units='kg/m**3')
indep_var_comp.add_output('cg', val=np.zeros((3)), units='m')
prob.model.add_subsystem('prob_vars', indep_var_comp, promotes=['*'])
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('t_over_c_cp', val=np.array([0.15]))
indep_var_comp.add_output('span', val=12., units='m')
indep_var_comp.add_output('twist_cp_0', val=np.zeros((5)), units='deg')
indep_var_comp.add_output('twist_cp_1', val=np.zeros((5)), units='deg')
prob.model.add_subsystem('geom_vars', indep_var_comp, promotes=['*'])
# Loop through and add a certain number of aero points
for i in range(n_points):
# Create the aero point group and add it to the model
aero_group = AeroPoint(surfaces=surfaces)
point_name = 'aero_point_{}'.format(i)
prob.model.add_subsystem(point_name, aero_group)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v')
prob.model.connect('alpha', point_name + '.alpha')
prob.model.connect('Mach_number', point_name + '.Mach_number')
prob.model.connect('re', point_name + '.re')
prob.model.connect('rho', point_name + '.rho')
prob.model.connect('cg', point_name + '.cg')
# Connect the parameters within the model for each aero point
for surface in surfaces:
geom_group = Geometry(surface=surface, connect_geom_DVs=False)
# Add tmp_group to the problem as the name of the surface.
# Note that is a group and performance group for each
# individual surface.
aero_group.add_subsystem(surface['name'] + '_geom', geom_group)
name = surface['name']
prob.model.connect(point_name + '.CD',
'multi_CD.' + str(i) + '_CD')
# Connect the mesh from the geometry component to the analysis point
prob.model.connect(point_name + '.' + name + '_geom.mesh',
point_name + '.' + name + '.def_mesh')
# Perform the connections with the modified names within the
# 'aero_states' group.
prob.model.connect(
point_name + '.' + name + '_geom.mesh',
point_name + '.aero_states.' + name + '_def_mesh')
prob.model.connect(
point_name + '.' + name + '_geom.t_over_c',
point_name + '.' + name + '_perf.' + 't_over_c')
# prob.model.connect(point_name + '.' + name + '_geom.span', 'span_diff_comp.span_' + str(i))
# Connect geometric design variables to each point
prob.model.connect('t_over_c_cp', 'aero_point_0.wing_geom.t_over_c_cp')
prob.model.connect('t_over_c_cp', 'aero_point_1.wing_geom.t_over_c_cp')
prob.model.connect('span', 'aero_point_0.wing_geom.span')
prob.model.connect('span', 'aero_point_1.wing_geom.span')
prob.model.connect('twist_cp_0', 'aero_point_0.wing_geom.twist_cp')
prob.model.connect('twist_cp_1', 'aero_point_1.wing_geom.twist_cp')
prob.model.add_subsystem('multi_CD',
MultiCD(n_points=n_points),
promotes_outputs=['CD'])
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['tol'] = 1e-9
# # Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('alpha', lower=-15, upper=15)
prob.model.add_design_var('twist_cp_0', lower=-5, upper=8)
prob.model.add_design_var('twist_cp_1', lower=-5, upper=8)
prob.model.add_design_var('span', lower=2, upper=15)
prob.model.add_constraint('aero_point_0.wing_perf.CL', equals=0.45)
prob.model.add_constraint('aero_point_1.wing_perf.CL', equals=0.50)
prob.model.add_objective('CD', scaler=1e4)
# Set up the problem
prob.setup()
prob.run_driver()
assert_rel_error(self, prob['aero_point_0.wing_perf.CL'][0], 0.45,
1e-6)
assert_rel_error(self, prob['aero_point_1.wing_perf.CL'][0], 0.5, 1e-6)
assert_rel_error(
self, prob['twist_cp_0'],
np.array([8., -1.21207749, -2.42415497, -1.21207749, -1.0821358]),
1e-6)
assert_rel_error(
self, prob['twist_cp_1'],
np.array([8., -0.02049115, -0.0409823, -0.02049115, 0.77903674]),
1e-6)
assert_rel_error(self, prob['aero_point_1.wing_perf.CL'][0], 0.5, 1e-6)
def test_debug_print_option(self):
prob = Problem()
model = prob.model = Group()
model.add_subsystem('p1', IndepVarComp('x', 50.0), promotes=['*'])
model.add_subsystem('p2', IndepVarComp('y', 50.0), promotes=['*'])
model.add_subsystem('comp', Paraboloid(), promotes=['*'])
model.add_subsystem('con', ExecComp('c = - x + y'), promotes=['*'])
prob.set_solver_print(level=0)
prob.driver = ScipyOptimizeDriver()
prob.driver.options['optimizer'] = 'SLSQP'
prob.driver.options['tol'] = 1e-9
prob.driver.options['disp'] = False
prob.driver.options['debug_print'] = [
'desvars', 'ln_cons', 'nl_cons', 'objs'
]
model.add_design_var('x', lower=-50.0, upper=50.0)
model.add_design_var('y', lower=-50.0, upper=50.0)
model.add_objective('f_xy')
model.add_constraint('c', upper=-15.0)
prob.setup(check=False)
stdout = sys.stdout
strout = StringIO()
sys.stdout = strout
try:
prob.run_driver()
finally:
sys.stdout = stdout
output = strout.getvalue().split('\n')
self.assertTrue(
output.count("Design Vars") > 1,
"Should be more than one design vars header printed")
self.assertTrue(
output.count("Nonlinear constraints") > 1,
"Should be more than one nonlinear constraint header printed")
self.assertTrue(
output.count("Linear constraints") > 1,
"Should be more than one linear constraint header printed")
self.assertTrue(
output.count("Objectives") > 1,
"Should be more than one objective header printed")
self.assertTrue(
len([s for s in output if s.startswith('p1.x')]) > 1,
"Should be more than one p1.x printed")
self.assertTrue(
len([s for s in output if s.startswith('p2.y')]) > 1,
"Should be more than one p2.y printed")
self.assertTrue(
len([s for s in output if s.startswith('con.c')]) > 1,
"Should be more than one con.c printed")
self.assertTrue(
len([s for s in output if s.startswith('comp.f_xy')]) > 1,
"Should be more than one comp.f_xy printed")
def test(self):
import numpy as np
from openmdao.api import IndepVarComp, Problem, Group, NewtonSolver, \
ScipyIterativeSolver, LinearBlockGS, NonlinearBlockGS, \
DirectSolver, LinearBlockGS, PetscKSP, SqliteRecorder
from openaerostruct.geometry.utils import generate_mesh
from openaerostruct.geometry.geometry_group import Geometry
from openaerostruct.aerodynamics.aero_groups import AeroPoint
# Create a dictionary to store options about the mesh
mesh_dict = {'num_y' : 7,
'num_x' : 2,
'wing_type' : 'CRM',
'symmetry' : False,
'num_twist_cp' : 5}
# Generate the aerodynamic mesh based on the previous dictionary
mesh, twist_cp = generate_mesh(mesh_dict)
# Create a dictionary with info and options about the aerodynamic
# lifting surface
surface = {
# Wing definition
'name' : 'wing', # name of the surface
'type' : 'aero',
'symmetry' : False, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type' : 'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type' : 'tube',
'twist_cp' : twist_cp,
'mesh' : mesh,
'num_x' : mesh.shape[0],
'num_y' : mesh.shape[1],
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0' : 0.0, # CL of the surface at alpha=0
'CD0' : 0.015, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam' : 0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp' : np.array([0.15]), # thickness over chord ratio (NACA0015)
'c_max_t' : .303, # chordwise location of maximum (NACA0015)
# thickness
'with_viscous' : True, # if true, compute viscous drag
'with_wave' : False, # if true, compute wave drag
}
# Create the OpenMDAO problem
prob = Problem()
# Create an independent variable component that will supply the flow
# conditions to the problem.
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=248.136, units='m/s')
indep_var_comp.add_output('alpha', val=5., units='deg')
indep_var_comp.add_output('M', val=0.84)
indep_var_comp.add_output('re', val=1.e6, units='1/m')
indep_var_comp.add_output('rho', val=0.38, units='kg/m**3')
indep_var_comp.add_output('cg', val=np.zeros((3)), units='m')
# Add this IndepVarComp to the problem model
prob.model.add_subsystem('prob_vars',
indep_var_comp,
promotes=['*'])
# Create and add a group that handles the geometry for the
# aerodynamic lifting surface
geom_group = Geometry(surface=surface)
prob.model.add_subsystem(surface['name'], geom_group)
# Create the aero point group, which contains the actual aerodynamic
# analyses
aero_group = AeroPoint(surfaces=[surface])
point_name = 'aero_point_0'
prob.model.add_subsystem(point_name, aero_group,
promotes_inputs=['v', 'alpha', 'M', 're', 'rho', 'cg'])
name = surface['name']
# Connect the mesh from the geometry component to the analysis point
prob.model.connect(name + '.mesh', point_name + '.' + name + '.def_mesh')
# Perform the connections with the modified names within the
# 'aero_states' group.
prob.model.connect(name + '.mesh', point_name + '.aero_states.' + name + '_def_mesh')
prob.model.connect(name + '.t_over_c', point_name + '.' + name + '_perf.' + 't_over_c')
# Import the Scipy Optimizer and set the driver of the problem to use
# it, which defaults to an SLSQP optimization method
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
prob.driver.options['tol'] = 1e-9
# Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.twist_cp', lower=-10., upper=15.)
prob.model.add_constraint(point_name + '.wing_perf.CL', equals=0.5)
prob.model.add_objective(point_name + '.wing_perf.CD', scaler=1e4)
# Set up and run the optimization problem
prob.setup()
prob.run_model()
# prob.check_partials()
# exit()
prob.run_driver()
assert_rel_error(self, prob['aero_point_0.wing_perf.CD'][0], 0.03339013029042684, 1e-5)
assert_rel_error(self, prob['aero_point_0.wing_perf.CL'][0], 0.5, 1e-6)
assert_rel_error(self, prob['aero_point_0.CM'][1], -0.18453592482214315, 1e-4)
def brachistochrone_min_time(transcription='gauss-lobatto',
num_segments=8,
transcription_order=3,
compressed=True,
sim_record='brach_min_time_sim.db',
optimizer='SLSQP',
dynamic_simul_derivs=True,
force_alloc_complex=False,
solve_segments=False,
run_driver=True):
p = Problem(model=Group())
if optimizer == 'SNOPT':
p.driver = pyOptSparseDriver()
p.driver.options['optimizer'] = optimizer
p.driver.opt_settings['Major iterations limit'] = 100
p.driver.opt_settings['Major feasibility tolerance'] = 1.0E-6
p.driver.opt_settings['Major optimality tolerance'] = 1.0E-6
p.driver.opt_settings['iSumm'] = 6
else:
p.driver = ScipyOptimizeDriver()
p.driver.options['dynamic_simul_derivs'] = dynamic_simul_derivs
if transcription == 'runge-kutta':
transcription = RungeKutta(num_segments=num_segments,
compressed=compressed)
elif transcription == 'gauss-lobatto':
transcription = GaussLobatto(num_segments=num_segments,
order=transcription_order,
compressed=compressed)
elif transcription == 'radau-ps':
transcription = Radau(num_segments=num_segments,
order=transcription_order,
compressed=compressed)
phase = Phase(ode_class=BrachistochroneVectorStatesODE,
transcription=transcription)
p.model.add_subsystem('phase0', phase)
phase.set_time_options(fix_initial=True, duration_bounds=(.5, 10))
fix_final = not solve_segments # can't fix final position if you're solving the segments
phase.set_state_options('pos',
fix_initial=True,
fix_final=fix_final,
solve_segments=solve_segments)
phase.set_state_options('v',
fix_initial=True,
fix_final=False,
solve_segments=solve_segments)
phase.add_control('theta',
continuity=True,
rate_continuity=True,
units='deg',
lower=0.01,
upper=179.9)
phase.add_design_parameter('g', units='m/s**2', opt=False, val=9.80665)
# Minimize time at the end of the phase
phase.add_objective('time', loc='final', scaler=10)
p.model.linear_solver = DirectSolver()
p.setup(check=True, force_alloc_complex=force_alloc_complex)
p['phase0.t_initial'] = 0.0
p['phase0.t_duration'] = 2.0
pos0 = [0, 10]
posf = [10, 5]
p['phase0.states:pos'] = phase.interpolate(ys=[pos0, posf],
nodes='state_input')
p['phase0.states:v'] = phase.interpolate(ys=[0, 9.9], nodes='state_input')
p['phase0.controls:theta'] = phase.interpolate(ys=[5, 100],
nodes='control_input')
p['phase0.design_parameters:g'] = 9.80665
p.run_model()
if run_driver:
p.run_driver()
# Plot results
if SHOW_PLOTS:
p.run_driver()
exp_out = phase.simulate(record_file=sim_record)
fig, ax = plt.subplots()
fig.suptitle('Brachistochrone Solution')
x_imp = p.get_val('phase0.timeseries.states:pos')[:, 0]
y_imp = p.get_val('phase0.timeseries.states:pos')[:, 1]
x_exp = exp_out.get_val('phase0.timeseries.states:pos')[:, 0]
y_exp = exp_out.get_val('phase0.timeseries.states:pos')[:, 1]
ax.plot(x_imp, y_imp, 'ro', label='implicit')
ax.plot(x_exp, y_exp, 'b-', label='explicit')
ax.set_xlabel('x (m)')
ax.set_ylabel('y (m)')
ax.grid(True)
ax.legend(loc='upper right')
fig, ax = plt.subplots()
fig.suptitle('Brachistochrone Solution')
x_imp = p.get_val('phase0.timeseries.time')
y_imp = p.get_val('phase0.timeseries.control_rates:theta_rate2')
x_exp = exp_out.get_val('phase0.timeseries.time')
y_exp = exp_out.get_val('phase0.timeseries.control_rates:theta_rate2')
ax.plot(x_imp, y_imp, 'ro', label='implicit')
ax.plot(x_exp, y_exp, 'b-', label='explicit')
ax.set_xlabel('time (s)')
ax.set_ylabel('theta rate2 (rad/s**2)')
ax.grid(True)
ax.legend(loc='lower right')
plt.show()
return p
prob = Problem(model=Group(num_par_fd=num_par_fd))
prob.model.approx_totals(method='fd')
prob.model.add_subsystem('comp',
LandBasedTurbine(RefBlade=blade,
Nsection_Tow=Nsection_Tow,
VerbosityCosts=True),
promotes=['*'])
else:
prob = Problem()
prob.model = LandBasedTurbine(RefBlade=blade,
Nsection_Tow=Nsection_Tow,
VerbosityCosts=True)
if optFlag:
# --- Solver ---
prob.driver = ScipyOptimizeDriver()
prob.driver.options['optimizer'] = 'SLSQP'
prob.driver.options['tol'] = 1.e-6
prob.driver.options['maxiter'] = 100
#prob.driver = pyOptSparseDriver()
#prob.driver.options['optimizer'] = 'CONMIN'
# prob.driver.options['optimizer'] = 'SNOPT'
# prob.driver.options['gradient method'] = "pyopt_fd"
# ----------------------
# --- Objective ---
prob.model.add_objective('lcoe')
# ----------------------
# --- Design Variables ---
def test(self):
from openaerostruct.geometry.utils import generate_mesh, write_FFD_file
from openaerostruct.geometry.geometry_group import Geometry
from openaerostruct.integration.aerostruct_groups import Aerostruct, AerostructPoint
from openmdao.api import IndepVarComp, Problem, Group, SqliteRecorder
from pygeo import DVGeometry
# Create a dictionary to store options about the surface
mesh_dict = {'num_y' : 5,
'num_x' : 2,
'wing_type' : 'CRM',
'symmetry' : True,
'num_twist_cp' : 5}
mesh, twist_cp = generate_mesh(mesh_dict)
surf_dict = {
# Wing definition
'name' : 'wing', # name of the surface
'type' : 'aerostruct',
'symmetry' : True, # if true, model one half of wing
# reflected across the plane y = 0
'S_ref_type' : 'wetted', # how we compute the wing area,
# can be 'wetted' or 'projected'
'fem_model_type' : 'tube',
'thickness_cp' : np.array([.1, .2, .3]),
'mesh' : mesh,
'num_x' : mesh.shape[0],
'num_y' : mesh.shape[1],
'geom_manipulator' : 'FFD',
'mx' : 2,
'my' : 3,
# Aerodynamic performance of the lifting surface at
# an angle of attack of 0 (alpha=0).
# These CL0 and CD0 values are added to the CL and CD
# obtained from aerodynamic analysis of the surface to get
# the total CL and CD.
# These CL0 and CD0 values do not vary wrt alpha.
'CL0' : 0.0, # CL of the surface at alpha=0
'CD0' : 0.015, # CD of the surface at alpha=0
# Airfoil properties for viscous drag calculation
'k_lam' : 0.05, # percentage of chord with laminar
# flow, used for viscous drag
't_over_c_cp' : np.array([0.15]), # thickness over chord ratio (NACA0015)
'c_max_t' : .303, # chordwise location of maximum (NACA0015)
# thickness
'with_viscous' : True,
'with_wave' : False, # if true, compute wave drag
# Structural values are based on aluminum 7075
'E' : 70.e9, # [Pa] Young's modulus of the spar
'G' : 30.e9, # [Pa] shear modulus of the spar
'yield' : 500.e6 / 2.5, # [Pa] yield stress divided by 2.5 for limiting case
'mrho' : 3.e3, # [kg/m^3] material density
'fem_origin' : 0.35, # normalized chordwise location of the spar
'wing_weight_ratio' : 2.,
# Constraints
'exact_failure_constraint' : False, # if false, use KS function
}
surfaces = [surf_dict]
# Create the problem and assign the model group
prob = Problem()
# Add problem information as an independent variables component
indep_var_comp = IndepVarComp()
indep_var_comp.add_output('v', val=248.136, units='m/s')
indep_var_comp.add_output('alpha', val=5., units='deg')
indep_var_comp.add_output('M', val=0.84)
indep_var_comp.add_output('re', val=1.e6, units='1/m')
indep_var_comp.add_output('rho', val=0.38, units='kg/m**3')
indep_var_comp.add_output('CT', val=9.80665 * 17.e-6, units='1/s')
indep_var_comp.add_output('R', val=11.165e6, units='m')
indep_var_comp.add_output('W0', val=0.4 * 3e5, units='kg')
indep_var_comp.add_output('a', val=295.4, units='m/s')
indep_var_comp.add_output('load_factor', val=1.)
indep_var_comp.add_output('empty_cg', val=np.zeros((3)), units='m')
prob.model.add_subsystem('prob_vars',
indep_var_comp,
promotes=['*'])
# Loop over each surface in the surfaces list
for surface in surfaces:
# Get the surface name and create a group to contain components
# only for this surface
name = surface['name']
filename = write_FFD_file(surface, surface['mx'], surface['my'])
DVGeo = DVGeometry(filename)
aerostruct_group = Aerostruct(surface=surface, DVGeo=DVGeo)
# Add tmp_group to the problem with the name of the surface.
prob.model.add_subsystem(name, aerostruct_group)
# Loop through and add a certain number of aero points
for i in range(1):
point_name = 'AS_point_{}'.format(i)
# Connect the parameters within the model for each aero point
# Create the aero point group and add it to the model
AS_point = AerostructPoint(surfaces=surfaces)
prob.model.add_subsystem(point_name, AS_point)
# Connect flow properties to the analysis point
prob.model.connect('v', point_name + '.v')
prob.model.connect('alpha', point_name + '.alpha')
prob.model.connect('M', point_name + '.M')
prob.model.connect('re', point_name + '.re')
prob.model.connect('rho', point_name + '.rho')
prob.model.connect('CT', point_name + '.CT')
prob.model.connect('R', point_name + '.R')
prob.model.connect('W0', point_name + '.W0')
prob.model.connect('a', point_name + '.a')
prob.model.connect('empty_cg', point_name + '.empty_cg')
prob.model.connect('load_factor', point_name + '.load_factor')
for surface in surfaces:
prob.model.connect('load_factor', name + '.load_factor')
com_name = point_name + '.' + name + '_perf'
prob.model.connect(name + '.K', point_name + '.coupled.' + name + '.K')
# Connect aerodyamic mesh to coupled group mesh
prob.model.connect(name + '.mesh', point_name + '.coupled.' + name + '.mesh')
prob.model.connect(name + '.element_weights', point_name + '.coupled.' + name + '.element_weights')
# Connect performance calculation variables
prob.model.connect(name + '.radius', com_name + '.radius')
prob.model.connect(name + '.thickness', com_name + '.thickness')
prob.model.connect(name + '.nodes', com_name + '.nodes')
prob.model.connect(name + '.cg_location', point_name + '.' + 'total_perf.' + name + '_cg_location')
prob.model.connect(name + '.structural_weight', point_name + '.' + 'total_perf.' + name + '_structural_weight')
prob.model.connect(name + '.t_over_c', com_name + '.t_over_c')
# Import the Scipy Optimizer and set the driver of the problem to use
# it, which defaults to an SLSQP optimization method
from openmdao.api import ScipyOptimizeDriver
prob.driver = ScipyOptimizeDriver()
recorder = SqliteRecorder("aerostruct_ffd.db")
prob.driver.add_recorder(recorder)
prob.driver.recording_options['record_derivatives'] = True
# Setup problem and add design variables, constraint, and objective
prob.model.add_design_var('wing.shape', lower=-3, upper=2)
prob.model.add_design_var('wing.thickness_cp', lower=0.01, upper=0.5, scaler=1e2)
prob.model.add_constraint('AS_point_0.wing_perf.failure', upper=0.)
prob.model.add_constraint('AS_point_0.wing_perf.thickness_intersects', upper=0.)
# Add design variables, constraisnt, and objective on the problem
prob.model.add_design_var('alpha', lower=-10., upper=10.)
prob.model.add_constraint('AS_point_0.L_equals_W', equals=0.)
prob.model.add_objective('AS_point_0.fuelburn', scaler=1e-5)
# iprofile.setup()
# iprofile.start()
# Set up the problem
prob.setup()
# from openmdao.api import view_model
# view_model(prob, outfile='aerostruct_ffd', show_browser=False)
# prob.run_model()
prob.run_driver()
# prob.check_partials(compact_print=True)
# print("\nWing CL:", prob['aero_point_0.wing_perf.CL'])
# print("Wing CD:", prob['aero_point_0.wing_perf.CD'])
# from helper import plot_3d_points
#
# mesh = prob['aero_point_0.wing.def_mesh']
# plot_3d_points(mesh)
#
# filename = mesh_dict['wing_type'] + '_' + str(mesh_dict['num_x']) + '_' + str(mesh_dict['num_y'])
# filename += '_' + str(surf_dict['mx']) + '_' + str(surf_dict['my']) + '.mesh'
# np.save(filename, mesh)
assert_rel_error(self, prob['AS_point_0.fuelburn'][0], 104675.0989232741, 1e-4)
def test_recording_remote_voi(self):
# Create a parallel model
model = Group()
model.add_subsystem('par', ParallelGroup())
model.par.add_subsystem('G1', Mygroup())
model.par.add_subsystem('G2', Mygroup())
model.connect('par.G1.y', 'Obj.y1')
model.connect('par.G2.y', 'Obj.y2')
model.add_subsystem('Obj', ExecComp('obj=y1+y2'))
model.add_objective('Obj.obj')
# Configure driver to record VOIs on both procs
driver = ScipyOptimizeDriver(disp=False)
driver.recording_options['record_desvars'] = True
driver.recording_options['record_responses'] = True
driver.recording_options['record_objectives'] = True
driver.recording_options['record_constraints'] = True
driver.recording_options['includes'] = ['par.G1.y', 'par.G2.y']
driver.add_recorder(self.recorder)
# Create problem and run driver
prob = Problem(model, driver)
prob.add_recorder(self.recorder)
prob.setup()
t0, t1 = run_driver(prob)
prob.record_iteration('final')
t2 = time()
prob.cleanup()
# Since the test will compare the last case recorded, just check the
# current values in the problem. This next section is about getting those values
# These involve collective gathers so all ranks need to run this
expected_outputs = driver.get_design_var_values()
expected_outputs.update(driver.get_objective_values())
expected_outputs.update(driver.get_constraint_values())
# includes for outputs are specified as promoted names but we need absolute names
prom2abs = model._var_allprocs_prom2abs_list['output']
abs_includes = [prom2abs[n][0] for n in prob.driver.recording_options['includes']]
# Absolute path names of includes on this rank
rrank = model.comm.rank
rowned = model._owning_rank
local_includes = [n for n in abs_includes if rrank == rowned[n]]
# Get values for all vars on this rank
inputs, outputs, residuals = model.get_nonlinear_vectors()
# Get values for includes on this rank
local_vars = {n: outputs[n] for n in local_includes}
# Gather values for includes on all ranks
all_vars = model.comm.gather(local_vars, root=0)
if prob.comm.rank == 0:
# Only on rank 0 do we have all the values. The all_vars variable is a list of
# dicts from all ranks 0,1,... In this case, just ranks 0 and 1
dct = all_vars[-1]
for d in all_vars[:-1]:
dct.update(d)
expected_includes = {
'par.G1.Cy.y': dct['par.G1.Cy.y'],
'par.G2.Cy.y': dct['par.G2.Cy.y'],
}
expected_outputs.update(expected_includes)
coordinate = [0, 'ScipyOptimize_SLSQP', (driver.iter_count-1,)]
expected_data = ((coordinate, (t0, t1), expected_outputs, None),)
assertDriverIterDataRecorded(self, expected_data, self.eps)
expected_data = (('final', (t1, t2), expected_outputs),)
assertProblemDataRecorded(self, expected_data, self.eps)
def test_parallel(self):
from openmdao.api import ParallelGroup, NonlinearBlockGS
class SellarMDA(Group):
"""
Group containing the Sellar MDA.
"""
def setup(self):
indeps = self.add_subsystem('indeps',
IndepVarComp(),
promotes=['*'])
indeps.add_output('x', 1.0)
indeps.add_output('z', np.array([5.0, 2.0]))
cycle = self.add_subsystem('cycle',
ParallelGroup(),
promotes=['*'])
cycle.add_subsystem('d1',
SellarDis1(),
promotes_inputs=['x', 'z', 'y2'],
promotes_outputs=['y1'])
cycle.add_subsystem('d2',
SellarDis2(),
promotes_inputs=['z', 'y1'],
promotes_outputs=['y2'])
# Nonlinear Block Gauss Seidel is a gradient free solver
cycle.nonlinear_solver = NonlinearBlockGS()
self.add_subsystem('obj_cmp',
ExecComp(
'obj = x**2 + z[1] + y1 + exp(-y2)',
z=np.array([0.0, 0.0]),
x=0.0),
promotes=['x', 'z', 'y1', 'y2', 'obj'])
self.add_subsystem('con_cmp1',
ExecComp('con1 = 3.16 - y1'),
promotes=['con1', 'y1'])
self.add_subsystem('con_cmp2',
ExecComp('con2 = y2 - 24.0'),
promotes=['con2', 'y2'])
filename = 'xdsmjs_parallel'
out_format = 'html'
prob = Problem(model=SellarMDA())
model = prob.model
prob.driver = ScipyOptimizeDriver()
model.add_design_var('z',
lower=np.array([-10.0, 0.0]),
upper=np.array([10.0, 10.0]),
indices=np.arange(2, dtype=int))
model.add_design_var('x', lower=0.0, upper=10.0)
model.add_objective('obj')
model.add_constraint('con1', equals=np.zeros(1))
model.add_constraint('con2', upper=0.0)
prob.setup(check=False)
prob.final_setup()
# Write output
write_xdsm(prob,
filename=filename,
out_format=out_format,
quiet=QUIET,
show_browser=SHOW,
show_parallel=True)
# Check if file was created
self.assertTrue(os.path.isfile('.'.join([filename, out_format])))
