def generate_configuration_file(configuration_file_path: str, overwrite: bool = False):
"""
Generates a sample configuration file.
:param configuration_file_path: the path of file to be written
:param overwrite: if True, the file will be written, even if it already exists
:raise FastFileExistsError: if overwrite==False and configuration_file_path already exists
"""
if not overwrite and pth.exists(configuration_file_path):
raise FastFileExistsError(
"Configuration file %s not written because it already exists. "
"Use overwrite=True to bypass." % configuration_file_path,
configuration_file_path,
)
if not pth.exists(pth.split(configuration_file_path)[0]):
os.mkdir(pth.split(configuration_file_path)[0])
parser = InputFileGenerator()
root_folder = resources.__path__[0]
for i in range(2):
root_folder = pth.split(root_folder)[0]
package_path = "[\"" + root_folder.replace('\\','\\\\') + "\"]"
with path(resources, SAMPLE_FILENAME) as input_template_path:
parser.set_template_file(str(input_template_path))
# noinspection PyTypeChecker
parser.set_generated_file(configuration_file_path)
parser.reset_anchor()
parser.mark_anchor("module_folders")
parser.transfer_var(package_path, 0, 3)
parser.generate()
_LOGGER.info("Sample configuration written in %s", configuration_file_path)
def test_templated_input_same_anchors(self):
template = '\n'.join(
["CQUAD4 1 3.456", "CQUAD4 2 4.123", "CQUAD4 3 7.222", "CQUAD4 4"])
outfile = open(self.templatename, 'w')
outfile.write(template)
outfile.close()
gen = InputFileGenerator()
gen.set_template_file(self.templatename)
gen.set_generated_file(self.filename)
gen.set_delimiters(', ')
gen.mark_anchor('CQUAD4')
gen.transfer_var('x', 0, 2)
gen.mark_anchor('CQUAD4')
gen.transfer_var('y', 0, 3)
gen.mark_anchor('CQUAD4', 2)
gen.transfer_var('z', 0, 2)
gen.generate()
infile = open(self.filename, 'r')
result = infile.read()
infile.close()
answer = '\n'.join(
["CQUAD4 x 3.456", "CQUAD4 2 y", "CQUAD4 3 7.222", "CQUAD4 z"])
self.assertEqual(answer, result)
def compute(self, inputs, outputs):
x = inputs['RadLen']
var = '{0};'.format(float(x))
# generate the input file for esatan thermal analysis
generator = InputFileGenerator()
generator.set_template_file('radiator_templ.txt')
generator.set_generated_file('radiator.d')
generator.mark_anchor("$CONSTANTS")
generator.transfer_var(var, 4, 3)
generator.generate()
# the parent compute function actually runs the external code
super(Radiator, self).compute(inputs, outputs)
# parse the output file from the external code and set the value of T_max
parser = FileParser()
parser.set_file('radiator.out')
parser.mark_anchor("+RADIATOR ")
T_max = parser.transfer_var(5, 6)
outputs['T_max'] = T_max
def test_templated_input_same_anchors(self):
template = '\n'.join([
"CQUAD4 1 3.456",
"CQUAD4 2 4.123",
"CQUAD4 3 7.222",
"CQUAD4 4"
])
outfile = open(self.templatename, 'w')
outfile.write(template)
outfile.close()
gen = InputFileGenerator()
gen.set_template_file(self.templatename)
gen.set_generated_file(self.filename)
gen.set_delimiters(', ')
gen.mark_anchor('CQUAD4')
gen.transfer_var('x', 0, 2)
gen.mark_anchor('CQUAD4')
gen.transfer_var('y', 0, 3)
gen.mark_anchor('CQUAD4', 2)
gen.transfer_var('z', 0, 2)
gen.generate()
infile = open(self.filename, 'r')
result = infile.read()
infile.close()
answer = '\n'.join([
"CQUAD4 x 3.456",
"CQUAD4 2 y",
"CQUAD4 3 7.222",
"CQUAD4 z"
])
self.assertEqual(answer, result)
def test_templated_input(self):
template = '\n'.join([
"Junk",
"Anchor",
" A 1, 2 34, Test 1e65",
" B 4 Stuff",
"Anchor",
" C 77 False Inf 333.444"
])
outfile = open(self.templatename, 'w')
outfile.write(template)
outfile.close()
gen = InputFileGenerator()
gen.set_template_file(self.templatename)
gen.set_generated_file(self.filename)
gen.set_delimiters(', ')
gen.mark_anchor('Anchor')
gen.transfer_var('CC', 2, 0)
gen.transfer_var(3.0, 1, 3)
gen.reset_anchor()
gen.mark_anchor('Anchor', 2)
gen.transfer_var('NaN', 1, 4)
gen.reset_anchor()
gen.transfer_var('55', 3, 2)
gen.mark_anchor('C 77')
gen.transfer_var(1.3e-37, -3, 6)
gen.clearline(-5)
gen.mark_anchor('Anchor', -1)
gen.transfer_var('8.7', 1, 5)
gen.generate()
infile = open(self.filename, 'r')
result = infile.read()
infile.close()
answer = '\n'.join([
"",
"Anchor",
" A 1, 3.0 34, Test 1.3e-37",
" B 55 Stuff",
"Anchor",
" C 77 False NaN 8.7"
])
self.assertEqual(answer, result)
# Test some errors
try:
gen.mark_anchor('C 77', 3.14)
except ValueError as err:
msg = "The value for occurrence must be an integer"
self.assertEqual(str(err), msg)
else:
self.fail('ValueError expected')
try:
gen.mark_anchor('C 77', 0)
except ValueError as err:
msg = "0 is not valid for an anchor occurrence."
self.assertEqual(str(err), msg)
else:
self.fail('ValueError expected')
try:
gen.mark_anchor('ZZZ')
except RuntimeError as err:
msg = "Could not find pattern ZZZ in template file template.dat"
self.assertEqual(str(err), msg)
else:
self.fail('RuntimeError expected')
def test_templated_input(self):
template = '\n'.join([
"Junk", "Anchor", " A 1, 2 34, Test 1e65", " B 4 Stuff", "Anchor",
" C 77 False Inf 333.444"
])
outfile = open(self.templatename, 'w')
outfile.write(template)
outfile.close()
gen = InputFileGenerator()
gen.set_template_file(self.templatename)
gen.set_generated_file(self.filename)
gen.set_delimiters(', ')
gen.mark_anchor('Anchor')
gen.transfer_var('CC', 2, 0)
gen.transfer_var(3.0, 1, 3)
gen.reset_anchor()
gen.mark_anchor('Anchor', 2)
gen.transfer_var('NaN', 1, 4)
gen.reset_anchor()
gen.transfer_var('55', 3, 2)
gen.mark_anchor('C 77')
gen.transfer_var(1.3e-37, -3, 6)
gen.clearline(-5)
gen.mark_anchor('Anchor', -1)
gen.transfer_var('8.7', 1, 5)
gen.generate()
infile = open(self.filename, 'r')
result = infile.read()
infile.close()
answer = '\n'.join([
"", "Anchor", " A 1, 3.0 34, Test 1.3e-37", " B 55 Stuff",
"Anchor", " C 77 False NaN 8.7"
])
self.assertEqual(answer, result)
# Test some errors
try:
gen.mark_anchor('C 77', 3.14)
except ValueError as err:
msg = "The value for occurrence must be an integer"
self.assertEqual(str(err), msg)
else:
self.fail('ValueError expected')
try:
gen.mark_anchor('C 77', 0)
except ValueError as err:
msg = "0 is not valid for an anchor occurrence."
self.assertEqual(str(err), msg)
else:
self.fail('ValueError expected')
try:
gen.mark_anchor('ZZZ')
except RuntimeError as err:
msg = "Could not find pattern ZZZ in template file template.dat"
self.assertEqual(str(err), msg)
else:
self.fail('RuntimeError expected')
def compute(self, inputs, outputs):
# Results Folder creation if needed --------------------------------------------------------
result_folder_path = self.options[OPTION_RESULT_FOLDER_PATH]
if result_folder_path != "":
os.makedirs(result_folder_path, exist_ok=True)
# Creation of the temporary directory ------------------------------------------------------
tmp_dir = TemporaryDirectory()
if self.options[OPTION_AVL_EXE_PATH] != "":
copy_resource(xfoil_resources, _PROFILE_FILE_NAME, tmp_dir.name)
self.options["command"] = [self.options[OPTION_AVL_EXE_PATH]]
else:
copy_resource(avl336, _AVL_EXE_NAME, tmp_dir.name)
copy_resource(xfoil_resources, _PROFILE_FILE_NAME, tmp_dir.name)
self.options["command"] = [pth.join(tmp_dir.name, _AVL_EXE_NAME)]
self.stdin = pth.join(tmp_dir.name, _STDIN_FILE_NANE)
self.stdout = pth.join(tmp_dir.name, _STDOUT_FILE_NAME)
self.stderr = pth.join(tmp_dir.name, _STDERR_FILE_NAME)
# AVL geometry file (.avl) creation --------------------------------------------------------
input_geom_file = pth.join(tmp_dir.name, _AVL_GEOM_NAME)
profile_file = pth.join(tmp_dir.name, _PROFILE_FILE_NAME)
self._get_avl_geom_file(inputs, input_geom_file, _PROFILE_FILE_NAME)
# AVL session file creation ----------------------------------------------------------------
s_ref = inputs["data:geometry:wing:area"]
b_ref = inputs["data:geometry:wing:span"]
c_ref = inputs["data:geometry:wing:MAC:length"]
mach = inputs["data:aerostructural:load_case:mach"]
alt = inputs["data:aerostructural:load_case:altitude"]
rho = Atm(alt).density
vtas = Atm(alt).speed_of_sound * mach
q = 0.5 * rho * vtas ** 2
m_lc = inputs["data:aerostructural:load_case:weight"]
nz = inputs["data:aerostructural:load_case:load_factor"]
cl = nz * m_lc * g / (q * s_ref)
tmp_result_file = pth.join(tmp_dir.name, self.options[OPTION_RESULT_AVL_FILENAME])
parser = InputFileGenerator()
with path(ressources, _STDIN_FILE_NANE) as stdin_template:
parser.set_template_file(stdin_template)
parser.set_generated_file(self.stdin)
# Update session file with target values:
parser.mark_anchor("LOAD")
parser.transfer_var(input_geom_file, 1, 1)
parser.mark_anchor("OPER")
parser.transfer_var(float(cl), 1, 3)
parser.mark_anchor("M")
parser.transfer_var(float(mach), 1, 2)
parser.transfer_var(float(vtas), 2, 2)
parser.transfer_var(float(rho), 3, 2)
parser.mark_anchor("W")
parser.transfer_var(tmp_result_file, 1, 1)
parser.generate()
# Check for input and output file presence -------------------------------------------------
self.options["external_input_files"] = [
self.stdin,
input_geom_file,
profile_file,
]
self.options["external_output_files"] = [tmp_result_file]
# Launch AVL -------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Gather results ---------------------------------------------------------------------------
parser_out = FileParser()
parser_out.set_file(tmp_result_file)
parser_out.mark_anchor("Alpha =")
aoa = parser_out.transfer_var(0, 3)
parser_out.mark_anchor("CLtot =")
outputs["data:aerostructural:aerodynamic:CL"] = parser_out.transfer_var(0, 3)
parser_out.mark_anchor("CDind =")
outputs["data:aerostructural:aerodynamic:CDi"] = parser_out.transfer_var(0, 6)
outputs["data:aerostructural:aerodynamic:Oswald_Coeff"] = parser_out.transfer_var(2, 6)
for (comp, sect) in zip(self.options["components"], self.options["components_sections"]):
size = sect # default number of section for non symmetric components
if comp in ("wing", "horizontal_tail", "strut"):
size = sect * 2 # number of sections doubled for symmetric components
elif comp == "fuselage":
size = 4 # particular case for fuselage due to specific VLM modelling
avl_comp = AVL_COMPONENT_NAMES[comp]
parser_out.mark_anchor(avl_comp)
comp_coef = parser_out.transfer_2Darray(0, 3, size - 1, 8)
# Reorganise result array to have coefficient in direct axis order
comp_coef[:, :] = comp_coef[:, [1, 3, 0, 5, 2, 4]]
# Comvert coefficients into forces and moments
comp_coef[:, :3] *= q * s_ref
comp_coef[:, [3, 5]] *= q * s_ref * b_ref
comp_coef[:, 4] *= q * s_ref * c_ref
# Change forces and moment from aerodynamic to body axis
r_mat = self._get_rotation_matrix(aoa * degree, axis="y")
comp_coef[:, :3] = np.dot(comp_coef[:, :3], r_mat)
comp_coef[:, 3:] = np.dot(comp_coef[:, 3:], r_mat) # Moments in std axis ie X fwd
outputs["data:aerostructural:aerodynamic:" + comp + ":forces"] = comp_coef
# outputs["data:aerostructural:aerodynamic:forces"] = q * s_ref * surface_coef
# Store input and result files if necessary ------------------------------------------------
if self.options[OPTION_RESULT_FOLDER_PATH]:
if pth.exists(tmp_result_file):
forces_file = pth.join(result_folder_path, self.options[OPTION_RESULT_AVL_FILENAME])
shutil.move(tmp_result_file, forces_file)
if pth.exists(input_geom_file):
geometry_file = pth.join(result_folder_path, _AVL_GEOM_NAME)
shutil.move(input_geom_file, geometry_file)
if pth.exists(self.stdin):
stdin_path = pth.join(result_folder_path, _STDIN_FILE_NANE)
shutil.move(self.stdin, stdin_path)
if pth.exists(self.stdout):
stdout_path = pth.join(result_folder_path, _STDOUT_FILE_NAME)
shutil.move(self.stdout, stdout_path)
if pth.exists(self.stderr):
stderr_path = pth.join(result_folder_path, _STDERR_FILE_NAME)
shutil.move(self.stderr, stderr_path)
tmp_dir.cleanup()
def compute(self, inputs, outputs):
# Create result folder first (if it must fail, let it fail as soon as possible)
result_folder_path = self.options[OPTION_RESULT_FOLDER_PATH]
if result_folder_path != "":
os.makedirs(result_folder_path, exist_ok=True)
# Get inputs
reynolds = inputs["xfoil:reynolds"]
mach = inputs["xfoil:mach"]
thickness_ratio = inputs["data:geometry:wing:thickness_ratio"]
# Pre-processing (populating temp directory) -----------------------------------------------
# XFoil exe
tmp_directory = self._create_tmp_directory()
if self.options[OPTION_XFOIL_EXE_PATH]:
# if a path for Xfoil has been provided, simply use it
self.options["command"] = [self.options[OPTION_XFOIL_EXE_PATH]]
else:
# otherwise, copy the embedded resource in tmp dir
copy_resource(xfoil699, XFOIL_EXE_NAME, tmp_directory.name)
self.options["command"] = [
pth.join(tmp_directory.name, XFOIL_EXE_NAME)
]
# I/O files
self.stdin = pth.join(tmp_directory.name, _INPUT_FILE_NAME)
self.stdout = pth.join(tmp_directory.name, _STDOUT_FILE_NAME)
self.stderr = pth.join(tmp_directory.name, _STDERR_FILE_NAME)
# profile file
tmp_profile_file_path = pth.join(tmp_directory.name,
_TMP_PROFILE_FILE_NAME)
profile = get_profile(file_name=self.options[OPTION_PROFILE_NAME],
thickness_ratio=thickness_ratio).get_sides()
np.savetxt(
tmp_profile_file_path,
profile.to_numpy(),
fmt="%.15f",
delimiter=" ",
header="Wing",
comments="",
)
# standard input file
tmp_result_file_path = pth.join(tmp_directory.name,
_TMP_RESULT_FILE_NAME)
parser = InputFileGenerator()
with path(resources, _INPUT_FILE_NAME) as input_template_path:
parser.set_template_file(input_template_path)
parser.set_generated_file(self.stdin)
# Fills numeric values
parser.mark_anchor("RE")
parser.transfer_var(float(reynolds), 1, 1)
parser.mark_anchor("M")
parser.transfer_var(float(mach), 1, 1)
parser.mark_anchor("ITER")
parser.transfer_var(self.options[OPTION_ITER_LIMIT], 1, 1)
parser.mark_anchor("ASEQ")
parser.transfer_var(self.options[OPTION_ALPHA_START], 1, 1)
parser.transfer_var(self.options[OPTION_ALPHA_END], 2, 1)
# Fills string values
# If a provide path contains the string that is used as next anchor, the process
# will fail. Doing these replacements at the end prevent this to happen.
parser.reset_anchor()
parser.mark_anchor("LOAD")
parser.transfer_var(tmp_profile_file_path, 1, 1)
parser.mark_anchor("PACC", -2)
parser.transfer_var(tmp_result_file_path, 1, 1)
parser.generate()
# Run XFOIL --------------------------------------------------------------------------------
self.options["external_input_files"] = [
self.stdin, tmp_profile_file_path
]
self.options["external_output_files"] = [tmp_result_file_path]
super().compute(inputs, outputs)
# Post-processing --------------------------------------------------------------------------
result_array = self._read_polar(tmp_result_file_path)
outputs["xfoil:CL_max_2D"] = self._get_max_cl(result_array["alpha"],
result_array["CL"])
# Getting output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH]:
if pth.exists(tmp_result_file_path):
polar_file_path = pth.join(
result_folder_path,
self.options[OPTION_RESULT_POLAR_FILENAME])
shutil.move(tmp_result_file_path, polar_file_path)
if pth.exists(self.stdin):
stdin_file_path = pth.join(result_folder_path,
_INPUT_FILE_NAME)
shutil.move(self.stdin, stdin_file_path)
if pth.exists(self.stdout):
stdout_file_path = pth.join(result_folder_path,
_STDOUT_FILE_NAME)
shutil.move(self.stdout, stdout_file_path)
if pth.exists(self.stderr):
stderr_file_path = pth.join(result_folder_path,
_STDERR_FILE_NAME)
shutil.move(self.stderr, stderr_file_path)
tmp_directory.cleanup()
def _write_script_file(self, reynolds, mach, tmp_profile_file_path, tmp_result_file_path, alpha_start,
alpha_end, step):
parser = InputFileGenerator()
with path(local_resources, _INPUT_FILE_NAME) as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(self.stdin)
parser.mark_anchor("RE")
parser.transfer_var(float(reynolds), 1, 1)
parser.mark_anchor("M")
parser.transfer_var(float(mach), 1, 1)
parser.mark_anchor("ITER")
parser.transfer_var(self.options[OPTION_ITER_LIMIT], 1, 1)
parser.mark_anchor("ASEQ")
parser.transfer_var(alpha_start, 1, 1)
parser.transfer_var(alpha_end, 2, 1)
parser.transfer_var(step, 3, 1)
parser.reset_anchor()
parser.mark_anchor("/profile")
parser.transfer_var(tmp_profile_file_path, 0, 1)
parser.mark_anchor("/polar_result")
parser.transfer_var(tmp_result_file_path, 0, 1)
parser.generate()
def compute(self, inputs, outputs):
eff = inputs['eff']
length = inputs['length']
alp = inputs['alp']
eps = inputs['eps']
GL107_200 = 1 / inputs['R_m']
GL111_300 = 1 / inputs['R_p']
GL103_400 = inputs['GlTether']
GL102_601 = 1 / inputs['R_s']
GL107_111 = inputs['ci1']
GL107_109 = inputs['ci2']
GL103_109 = inputs['ci3']
GL101_109 = inputs['ci4']
GL109_111 = inputs['ci5']
GL101_103 = inputs['ci6']
GL103_111 = inputs['ci7']
GL101_107 = inputs['ci8']
GL103_105 = inputs['ci9']
GL101_105 = inputs['ci10']
GL105_111 = inputs['ci11']
GL105_107 = inputs['ci12']
r_bat = inputs['r_bat']
ht_gain = inputs['ht_gain']
q_s = inputs['q_s']
eff = '{0};'.format(float(eff))
length = '{0};'.format(float(length))
ht_gain = '{0};'.format(float(ht_gain))
r_bat = '{0};'.format(float(r_bat))
q_s = '{0};'.format(float(q_s))
alp = '{0},'.format(float(alp))
eps = '{0},'.format(float(eps))
GL107_200 = '{0};'.format(float(GL107_200))
GL111_300 = '{0};'.format(float(GL111_300))
GL103_400 = '{0};'.format(float(GL103_400))
GL102_601 = '{0};'.format(float(GL102_601))
GL107_111 = '{0};'.format(float(GL107_111))
GL107_109 = '{0};'.format(float(GL107_109))
GL103_109 = '{0};'.format(float(GL103_109))
GL101_109 = '{0};'.format(float(GL101_109))
GL109_111 = '{0};'.format(float(GL109_111))
GL101_103 = '{0};'.format(float(GL101_103))
GL103_111 = '{0};'.format(float(GL103_111))
GL101_107 = '{0};'.format(float(GL101_107))
GL103_105 = '{0};'.format(float(GL103_105))
GL101_105 = '{0};'.format(float(GL101_105))
GL105_111 = '{0};'.format(float(GL105_111))
GL105_107 = '{0};'.format(float(GL105_107))
# generate the input file for RU_tm thermal analysis
generator = InputFileGenerator()
generator.set_template_file('./esatan/RU_template.txt')
generator.set_generated_file('./esatan/RU_tm.d')
generator.mark_anchor("$LOCALS")
generator.transfer_var(length, 21, 3)
generator.transfer_var(eff, 23, 3)
generator.transfer_var(r_bat, 25, 3)
generator.transfer_var(ht_gain, 27, 3)
generator.transfer_var(q_s, 29, 3)
generator.mark_anchor("$NODES")
generator.transfer_var(alp, 53, 6)
generator.transfer_var(eps, 53, 9)
generator.transfer_var(alp, 61, 6)
generator.transfer_var(eps, 61, 9)
generator.transfer_var(alp, 69, 6)
generator.transfer_var(eps, 69, 9)
generator.transfer_var(alp, 77, 6)
generator.transfer_var(eps, 77, 9)
generator.transfer_var(alp, 85, 6)
generator.transfer_var(eps, 85, 9)
generator.transfer_var(alp, 93, 6)
generator.transfer_var(eps, 93, 9)
generator.mark_anchor("Generated conductors")
generator.transfer_var(GL107_200, 3, 3)
generator.transfer_var(GL111_300, 4, 3)
generator.transfer_var(GL107_111, 5, 3)
generator.transfer_var(GL107_109, 6, 3)
generator.transfer_var(GL103_109, 7, 3)
generator.transfer_var(GL101_109, 8, 3)
generator.transfer_var(GL109_111, 9, 3)
generator.transfer_var(GL101_103, 10, 3)
generator.transfer_var(GL103_111, 11, 3)
generator.transfer_var(GL101_107, 12, 3)
generator.transfer_var(GL103_105, 13, 3)
generator.transfer_var(GL101_105, 14, 3)
generator.transfer_var(GL105_111, 15, 3)
generator.transfer_var(GL105_107, 16, 3)
generator.transfer_var(GL102_601, 17, 3)
generator.transfer_var(GL103_400, 45, 3)
generator.generate()
# the parent compute function actually runs the external code
super(RUextCodeComp, self).compute(inputs, outputs)
# parse the output file from the external code and set the value of T_max
parser = FileParser()
parser.set_file('./esatan/RU_TM.out')
parser.mark_anchor("+RU_TM")
tBat = parser.transfer_var(7, 3)
tMain = parser.transfer_var(34, 3)
tProp = parser.transfer_var(35, 3)
tTether = parser.transfer_var(36, 3)
tBPanel = parser.transfer_var(41, 3)
tDPanel = parser.transfer_var(43, 3)
outputs['tBat'] = tBat
outputs['tMain'] = tMain
outputs['tProp'] = tProp
outputs['tTether'] = tTether
outputs['tBPanel'] = tBPanel
outputs['tDPanel'] = tDPanel
def compute(self, inputs, outputs):
# Create result folder first (if it must fail, let it fail as soon as possible)
result_folder_path = self.options[OPTION_RESULT_FOLDER_PATH]
if result_folder_path != "":
os.makedirs(pth.join(result_folder_path, 'OSWALD'), exist_ok=True)
# Get inputs (and calculate missing ones)
x0_wing = inputs["data:geometry:wing:MAC:leading_edge:x:local"]
l0_wing = inputs["data:geometry:wing:MAC:length"]
width_max = inputs["data:geometry:fuselage:maximum_width"]
y1_wing = width_max / 2.0
y2_wing = inputs["data:geometry:wing:root:y"]
l2_wing = inputs["data:geometry:wing:root:chord"]
y4_wing = inputs["data:geometry:wing:tip:y"]
l4_wing = inputs["data:geometry:wing:tip:chord"]
sweep_0_wing = inputs["data:geometry:wing:sweep_0"]
fa_length = inputs["data:geometry:wing:MAC:at25percent:x"]
sref_wing = inputs['data:geometry:wing:area']
span_wing = inputs['data:geometry:wing:span']
height_max = inputs["data:geometry:fuselage:maximum_height"]
if self.options["low_speed_aero"]:
altitude = 0.0
atm = Atmosphere(altitude)
mach = inputs["data:aerodynamics:low_speed:mach"]
else:
altitude = inputs["data:mission:sizing:main_route:cruise:altitude"]
atm = Atmosphere(altitude)
mach = inputs["data:aerodynamics:cruise:mach"]
# Initial parameters calculation
x_wing = fa_length - x0_wing - 0.25 * l0_wing
z_wing = -(height_max - 0.12 * l2_wing) * 0.5
span2_wing = y4_wing - y2_wing
viscosity = atm.kinematic_viscosity
rho = atm.density
v_inf = max(atm.speed_of_sound * mach, 0.1) # avoid V=0 m/s crashes
reynolds = v_inf * l0_wing / viscosity
# OPENVSP-SCRIPT: Geometry generation ######################################################
# I/O files --------------------------------------------------------------------------------
tmp_directory = self._create_tmp_directory()
# avoid to dump void xternal_code_comp_error.out error file
self.stderr = pth.join(tmp_directory.name, _STDERR_FILE_NAME)
if self.options[OPTION_OPENVSP_EXE_PATH]:
target_directory = pth.abspath(self.options[OPTION_OPENVSP_EXE_PATH])
else:
target_directory = tmp_directory.name
input_file_list = [pth.join(target_directory, _INPUT_SCRIPT_FILE_NAME),
pth.join(target_directory, self.options['wing_airfoil_file'])]
tmp_result_file_path = pth.join(target_directory, _INPUT_AERO_FILE_NAME + '0.csv')
output_file_list = [tmp_result_file_path]
self.options["external_input_files"] = input_file_list
self.options["external_output_files"] = output_file_list
# Pre-processing (populating temp directory and generate batch file) -----------------------
# Copy resource in temp directory if needed
if not (self.options[OPTION_OPENVSP_EXE_PATH]):
# noinspection PyTypeChecker
copy_resource_folder(openvsp3201, target_directory)
# noinspection PyTypeChecker
copy_resource(resources, self.options['wing_airfoil_file'], target_directory)
# Create corresponding .bat file
self.options["command"] = [pth.join(target_directory, 'vspscript.bat')]
command = pth.join(target_directory, VSPSCRIPT_EXE_NAME) + ' -script ' \
+ pth.join(target_directory, _INPUT_SCRIPT_FILE_NAME) + ' >nul 2>nul\n'
batch_file = open(self.options["command"][0], "w+")
batch_file.write("@echo off\n")
batch_file.write(command)
batch_file.close()
# standard SCRIPT input file ---------------------------------------------------------------
parser = InputFileGenerator()
with path(local_resources, _INPUT_SCRIPT_FILE_NAME) as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(input_file_list[0])
parser.mark_anchor("x_wing")
parser.transfer_var(float(x_wing), 0, 5)
parser.mark_anchor("z_wing")
parser.transfer_var(float(z_wing), 0, 5)
parser.mark_anchor("y1_wing")
parser.transfer_var(float(y1_wing), 0, 5)
for i in range(3):
parser.mark_anchor("l2_wing")
parser.transfer_var(float(l2_wing), 0, 5)
parser.reset_anchor()
parser.mark_anchor("span2_wing")
parser.transfer_var(float(span2_wing), 0, 5)
parser.mark_anchor("l4_wing")
parser.transfer_var(float(l4_wing), 0, 5)
parser.mark_anchor("sweep_0_wing")
parser.transfer_var(float(sweep_0_wing), 0, 5)
parser.mark_anchor("airfoil_0_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("airfoil_1_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("airfoil_2_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("csv_file")
parser.transfer_var(self._rewrite_path(tmp_result_file_path), 0, 3)
parser.generate()
# Run SCRIPT --------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Getting input/output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
for file_path in input_file_list:
new_path = pth.join(result_folder_path, 'OSWALD', pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
for file_path in output_file_list:
new_path = pth.join(result_folder_path, 'OSWALD', pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
# OPENVSP-AERO: aero calculation ############################################################
# I/O files --------------------------------------------------------------------------------
# Duplicate .csv file for multiple run
input_file_list = [tmp_result_file_path]
for idx in range(len(_INPUT_AOAList) - 1):
shutil.copy(tmp_result_file_path, pth.join(target_directory, _INPUT_AERO_FILE_NAME + str(idx + 1) + '.csv'))
input_file_list.append(pth.join(target_directory, _INPUT_AERO_FILE_NAME + str(idx + 1) + '.csv'))
output_file_list = []
for idx in range(len(_INPUT_AOAList)):
input_file_list.append(pth.join(target_directory, _INPUT_AERO_FILE_NAME) + str(idx) + '.vspaero')
output_file_list.append(pth.join(target_directory, _INPUT_AERO_FILE_NAME) + str(idx) + '.polar')
self.options["external_input_files"] = input_file_list
self.options["external_output_files"] = output_file_list
# Pre-processing (create batch file) -------------------------------------------------------
self.options["command"] = [pth.join(target_directory, 'vspaero.bat')]
batch_file = open(self.options["command"][0], "w+")
batch_file.write("@echo off\n")
for idx in range(len(_INPUT_AOAList)):
command = pth.join(target_directory, VSPAERO_EXE_NAME) + ' ' \
+ pth.join(target_directory, _INPUT_AERO_FILE_NAME + str(idx) + ' >nul 2>nul\n')
batch_file.write(command)
batch_file.close()
# standard AERO input file -----------------------------------------------------------------
parser = InputFileGenerator()
for idx in range(len(_INPUT_AOAList)):
with path(local_resources, _INPUT_AERO_FILE_NAME + '.vspaero') as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(input_file_list[len(_INPUT_AOAList) + idx])
parser.reset_anchor()
parser.mark_anchor("Sref")
parser.transfer_var(float(sref_wing), 0, 3)
parser.mark_anchor("Cref")
parser.transfer_var(float(l0_wing), 0, 3)
parser.mark_anchor("Bref")
parser.transfer_var(float(span_wing), 0, 3)
parser.mark_anchor("X_cg")
parser.transfer_var(float(fa_length), 0, 3)
parser.mark_anchor("Mach")
parser.transfer_var(float(mach), 0, 3)
parser.mark_anchor("AOA")
parser.transfer_var(float(_INPUT_AOAList[idx]), 0, 3)
parser.mark_anchor("Vinf")
parser.transfer_var(float(v_inf), 0, 3)
parser.mark_anchor("Rho")
parser.transfer_var(float(rho), 0, 3)
parser.mark_anchor("ReCref")
parser.transfer_var(float(reynolds), 0, 3)
parser.generate()
# Run AERO --------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Post-processing --------------------------------------------------------------------------
result_oswald = []
for idx in range(len(_INPUT_AOAList)):
_, _, oswald, _ = self._read_polar_file(output_file_list[idx])
result_oswald.append(oswald)
# Fuselage correction
k_fus = 1 - 2 * (width_max / span_wing) ** 2
# Full aircraft correction: Wing lift is 105% of total lift.
# This means CDind = (CL*1.05)^2/(piAe) -> e' = e/1.05^2
coef_e = float(result_oswald[0] * k_fus / 1.05 ** 2)
coef_k = 1. / (math.pi * span_wing ** 2 / sref_wing * coef_e)
if self.options["low_speed_aero"]:
outputs["data:aerodynamics:aircraft:low_speed:induced_drag_coefficient"] = coef_k
else:
outputs["data:aerodynamics:aircraft:cruise:induced_drag_coefficient"] = coef_k
# Getting input/output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
for file_path in input_file_list:
new_path = pth.join(result_folder_path, 'OSWALD', pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
for file_path in output_file_list:
new_path = pth.join(result_folder_path, 'OSWALD', pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
# Delete temporary directory
tmp_directory.cleanup()
def compute(self, inputs, outputs):
# Create result folder first (if it must fail, let it fail as soon as possible)
result_folder_path = self.options[OPTION_RESULT_FOLDER_PATH]
if result_folder_path != "":
os.makedirs(pth.join(result_folder_path, 'ClCmHT'), exist_ok=True)
# Get inputs (and calculate missing ones)
x0_wing = inputs["data:geometry:wing:MAC:leading_edge:x:local"]
l0_wing = inputs["data:geometry:wing:MAC:length"]
width_max = inputs["data:geometry:fuselage:maximum_width"]
y1_wing = width_max / 2.0
y2_wing = inputs["data:geometry:wing:root:y"]
l2_wing = inputs["data:geometry:wing:root:chord"]
y4_wing = inputs["data:geometry:wing:tip:y"]
l4_wing = inputs["data:geometry:wing:tip:chord"]
sweep_0_wing = inputs["data:geometry:wing:sweep_0"]
fa_length = inputs["data:geometry:wing:MAC:at25percent:x"]
sref_wing = inputs['data:geometry:wing:area']
span_wing = inputs['data:geometry:wing:span']
height_max = inputs["data:geometry:fuselage:maximum_height"]
sweep_25_htp = inputs["data:geometry:horizontal_tail:sweep_25"]
span_htp = inputs["data:geometry:horizontal_tail:span"] / 2.0
root_chord_htp = inputs["data:geometry:horizontal_tail:root:chord"]
tip_chord_htp = inputs["data:geometry:horizontal_tail:tip:chord"]
lp_htp = inputs[
"data:geometry:horizontal_tail:MAC:at25percent:x:from_wingMAC25"]
l0_htp = inputs["data:geometry:horizontal_tail:MAC:length"]
x0_htp = inputs[
"data:geometry:horizontal_tail:MAC:at25percent:x:local"]
height_htp = inputs["data:geometry:horizontal_tail:z:from_wingMAC25"]
mach = inputs["data:aerodynamics:low_speed:mach"]
altitude = 0.0
# Compute remaining inputs
x_wing = fa_length - x0_wing - 0.25 * l0_wing
z_wing = -(height_max - 0.12 * l2_wing) * 0.5
span2_wing = y4_wing - y2_wing
distance_htp = fa_length + lp_htp - 0.25 * l0_htp - x0_htp
atm = Atmosphere(altitude)
viscosity = atm.kinematic_viscosity
rho = atm.density
v_inf = max(atm.speed_of_sound * mach, 0.01) # avoid V=0 m/s crashes
reynolds = v_inf * l0_wing / viscosity
# OPENVSP-SCRIPT: Geometry generation ######################################################
# I/O files --------------------------------------------------------------------------------
tmp_directory = self._create_tmp_directory()
# avoid to dump void xternal_code_comp_error.out error file
self.stderr = pth.join(tmp_directory.name, _STDERR_FILE_NAME)
if self.options[OPTION_OPENVSP_EXE_PATH]:
target_directory = pth.abspath(
self.options[OPTION_OPENVSP_EXE_PATH])
else:
target_directory = tmp_directory.name
input_file_list = [
pth.join(target_directory, _INPUT_SCRIPT_FILE_NAME),
pth.join(target_directory, self.options['wing_airfoil_file']),
pth.join(target_directory, self.options['htp_airfoil_file'])
]
tmp_result_file_path = pth.join(target_directory,
_INPUT_AERO_FILE_NAME + '0.csv')
output_file_list = [tmp_result_file_path]
self.options["external_input_files"] = input_file_list
self.options["external_output_files"] = output_file_list
# Pre-processing (populating temp directory) -----------------------------------------------
# Copy resource in temp directory if needed
if not (self.options[OPTION_OPENVSP_EXE_PATH]):
# noinspection PyTypeChecker
copy_resource_folder(openvsp3201, target_directory)
# noinspection PyTypeChecker
copy_resource(resources, self.options['wing_airfoil_file'],
target_directory)
# noinspection PyTypeChecker
copy_resource(resources, self.options['htp_airfoil_file'],
target_directory)
# Create corresponding .bat file
self.options["command"] = [pth.join(target_directory, 'vspscript.bat')]
command = pth.join(target_directory, VSPSCRIPT_EXE_NAME) + ' -script ' \
+ pth.join(target_directory, _INPUT_SCRIPT_FILE_NAME) + ' >nul 2>nul\n'
batch_file = open(self.options["command"][0], "w+")
batch_file.write("@echo off\n")
batch_file.write(command)
batch_file.close()
# standard SCRIPT input file ----------------------------------------------------------------
parser = InputFileGenerator()
with path(local_resources,
_INPUT_SCRIPT_FILE_NAME) as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(input_file_list[0])
parser.mark_anchor("x_wing")
parser.transfer_var(float(x_wing), 0, 5)
parser.mark_anchor("z_wing")
parser.transfer_var(float(z_wing), 0, 5)
parser.mark_anchor("y1_wing")
parser.transfer_var(float(y1_wing), 0, 5)
for i in range(3):
parser.mark_anchor("l2_wing")
parser.transfer_var(float(l2_wing), 0, 5)
parser.reset_anchor()
parser.mark_anchor("span2_wing")
parser.transfer_var(float(span2_wing), 0, 5)
parser.mark_anchor("l4_wing")
parser.transfer_var(float(l4_wing), 0, 5)
parser.mark_anchor("sweep_0_wing")
parser.transfer_var(float(sweep_0_wing), 0, 5)
parser.mark_anchor("airfoil_0_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("airfoil_1_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("airfoil_2_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("distance_htp")
parser.transfer_var(float(distance_htp), 0, 5)
parser.mark_anchor("height_htp")
parser.transfer_var(float(height_htp), 0, 5)
parser.mark_anchor("span_htp")
parser.transfer_var(float(span_htp), 0, 5)
parser.mark_anchor("root_chord_htp")
parser.transfer_var(float(root_chord_htp), 0, 5)
parser.mark_anchor("tip_chord_htp")
parser.transfer_var(float(tip_chord_htp), 0, 5)
parser.mark_anchor("sweep_25_htp")
parser.transfer_var(float(sweep_25_htp), 0, 5)
parser.mark_anchor("airfoil_3_file")
parser.transfer_var(self._rewrite_path(input_file_list[2]), 0, 3)
parser.mark_anchor("airfoil_4_file")
parser.transfer_var(self._rewrite_path(input_file_list[2]), 0, 3)
parser.mark_anchor("csv_file")
parser.transfer_var(self._rewrite_path(tmp_result_file_path), 0, 3)
parser.generate()
# Run SCRIPT --------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Getting input/output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
for file_path in input_file_list:
new_path = pth.join(result_folder_path, 'ClCmHT',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
for file_path in output_file_list:
new_path = pth.join(result_folder_path, 'ClCmHT',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
# OPENVSP-AERO: aero calculation ############################################################
# I/O files --------------------------------------------------------------------------------
# Duplicate .csv file for multiple run
input_file_list = [tmp_result_file_path]
for idx in range(len(_INPUT_AOAList) - 1):
shutil.copy(
tmp_result_file_path,
pth.join(target_directory,
_INPUT_AERO_FILE_NAME + str(idx + 1) + '.csv'))
input_file_list.append(
pth.join(target_directory,
_INPUT_AERO_FILE_NAME + str(idx + 1) + '.csv'))
output_file_list = []
for idx in range(len(_INPUT_AOAList)):
input_file_list.append(
pth.join(target_directory, _INPUT_AERO_FILE_NAME) + str(idx) +
'.vspaero')
output_file_list.append(
pth.join(target_directory, _INPUT_AERO_FILE_NAME) + str(idx) +
'.lod')
self.options["external_input_files"] = input_file_list
self.options["external_output_files"] = output_file_list
# Pre-processing (create batch file) -------------------------------------------------------
self.options["command"] = [pth.join(target_directory, 'vspaero.bat')]
batch_file = open(self.options["command"][0], "w+")
batch_file.write("@echo off\n")
for idx in range(len(_INPUT_AOAList)):
command = pth.join(target_directory, VSPAERO_EXE_NAME) + ' ' \
+ pth.join(target_directory, _INPUT_AERO_FILE_NAME + str(idx) + ' >nul 2>nul\n')
batch_file.write(command)
batch_file.close()
# standard AERO input file -----------------------------------------------------------------
parser = InputFileGenerator()
for idx in range(len(_INPUT_AOAList)):
with path(local_resources, _INPUT_AERO_FILE_NAME +
'.vspaero') as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(input_file_list[len(_INPUT_AOAList) +
idx])
parser.reset_anchor()
parser.mark_anchor("Sref")
parser.transfer_var(float(sref_wing), 0, 3)
parser.mark_anchor("Cref")
parser.transfer_var(float(l0_wing), 0, 3)
parser.mark_anchor("Bref")
parser.transfer_var(float(span_wing), 0, 3)
parser.mark_anchor("X_cg")
parser.transfer_var(float(fa_length), 0, 3)
parser.mark_anchor("Mach")
parser.transfer_var(float(mach), 0, 3)
parser.mark_anchor("AOA")
parser.transfer_var(float(_INPUT_AOAList[idx]), 0, 3)
parser.mark_anchor("Vinf")
parser.transfer_var(float(v_inf), 0, 3)
parser.mark_anchor("Rho")
parser.transfer_var(float(rho), 0, 3)
parser.mark_anchor("ReCref")
parser.transfer_var(float(reynolds), 0, 3)
parser.generate()
# Run AERO --------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Post-processing --------------------------------------------------------------------------
result_cl = []
result_cm1 = []
result_cm2 = []
for idx in range(len(_INPUT_AOAList)):
cl_htp, cm_htp, cm_wing = self._read_lod_file(
output_file_list[idx])
result_cl.append(cl_htp)
result_cm1.append(cm_htp)
result_cm2.append(cm_wing)
outputs[
'data:aerodynamics:horizontal_tail:low_speed:alpha'] = np.array(
_INPUT_AOAList)
outputs['data:aerodynamics:horizontal_tail:low_speed:CL'] = np.array(
result_cl)
outputs['data:aerodynamics:horizontal_tail:low_speed:CM'] = np.array(
result_cm1)
outputs['data:aerodynamics:wing:low_speed:alpha'] = np.array(
_INPUT_AOAList)
outputs['data:aerodynamics:wing:low_speed:CM'] = np.array(result_cm2)
# Getting input/output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
for file_path in input_file_list:
new_path = pth.join(result_folder_path, 'ClCmHT',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
for file_path in output_file_list:
new_path = pth.join(result_folder_path, 'ClCmHT',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
# Delete temporary directory
tmp_directory.cleanup()
def compute(self, inputs, outputs):
# Create result folder first (if it must fail, let it fail as soon as possible)
result_folder_path = self.options[OPTION_RESULT_FOLDER_PATH]
if result_folder_path != "":
os.makedirs(result_folder_path, exist_ok=True)
# Get inputs and initialise outputs
thickness_ratio = inputs["data:geometry:wing:thickness_ratio"]
length = inputs["xfoil:length"]
mach = inputs["xfoil:mach"]
reynolds = inputs["xfoil:unit_reynolds"]*length
# Pre-processing (populating temp directory) -----------------------------------------------
# XFoil exe
tmp_directory = self._create_tmp_directory()
if self.options[OPTION_XFOIL_EXE_PATH]:
# if a path for Xfoil has been provided, simply use it
self.options["command"] = [self.options[OPTION_XFOIL_EXE_PATH]]
else:
# otherwise, copy the embedded resource in tmp dir
# noinspection PyTypeChecker
copy_resource(xfoil699, XFOIL_EXE_NAME, tmp_directory.name)
self.options["command"] = [pth.join(tmp_directory.name, XFOIL_EXE_NAME)]
# I/O files
self.stdin = pth.join(tmp_directory.name, _INPUT_FILE_NAME)
self.stdout = pth.join(tmp_directory.name, _STDOUT_FILE_NAME)
self.stderr = pth.join(tmp_directory.name, _STDERR_FILE_NAME)
# profile file
tmp_profile_file_path = pth.join(tmp_directory.name, _TMP_PROFILE_FILE_NAME)
profile = get_profile(
file_name=self.options["wing_airfoil_file"],
thickness_ratio=thickness_ratio,
).get_sides()
# noinspection PyTypeChecker
np.savetxt(
tmp_profile_file_path,
profile.to_numpy(),
fmt="%.15f",
delimiter=" ",
header="Wing",
comments="",
)
# standard input file
tmp_result_file_path = pth.join(tmp_directory.name, _TMP_RESULT_FILE_NAME)
parser = InputFileGenerator()
with path(local_resources, _INPUT_FILE_NAME) as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(self.stdin)
parser.mark_anchor("RE")
parser.transfer_var(float(reynolds), 1, 1)
parser.mark_anchor("M")
parser.transfer_var(float(mach), 1, 1)
parser.mark_anchor("ITER")
parser.transfer_var(self.options[OPTION_ITER_LIMIT], 1, 1)
parser.mark_anchor("ASEQ")
parser.transfer_var(self.options[OPTION_ALPHA_START], 1, 1)
parser.transfer_var(self.options[OPTION_ALPHA_END], 2, 1)
parser.reset_anchor()
parser.mark_anchor("/profile")
parser.transfer_var(tmp_profile_file_path, 0, 1)
parser.mark_anchor("/polar_result")
parser.transfer_var(tmp_result_file_path, 0, 1)
parser.generate()
# Run XFOIL --------------------------------------------------------------------------------
self.options["external_input_files"] = [self.stdin, tmp_profile_file_path]
self.options["external_output_files"] = [tmp_result_file_path]
super().compute(inputs, outputs)
# Post-processing --------------------------------------------------------------------------
result_array = self._read_polar(tmp_result_file_path)
cl_max_2d = self._get_max_cl(result_array["alpha"], result_array["CL"])
real_length = min(POLAR_POINT_COUNT, len(result_array["alpha"]))
if real_length < len(result_array["alpha"]):
warnings.warn("Defined maximum polar point count in constants.py exceeded!")
outputs["xfoil:alpha"] = np.linspace(result_array["alpha"][0], result_array["alpha"][-1], POLAR_POINT_COUNT)
outputs["xfoil:CL"] = np.interp(outputs["xfoil:alpha"], result_array["alpha"], result_array["CL"])
outputs["xfoil:CD"] = np.interp(outputs["xfoil:alpha"], result_array["alpha"], result_array["CD"])
outputs["xfoil:CDp"] = np.interp(outputs["xfoil:alpha"], result_array["alpha"], result_array["CDp"])
outputs["xfoil:CDp"] = np.interp(outputs["xfoil:alpha"], result_array["alpha"], result_array["CM"])
else:
outputs["xfoil:alpha"] = np.zeros(POLAR_POINT_COUNT)
outputs["xfoil:CL"] = np.zeros(POLAR_POINT_COUNT)
outputs["xfoil:CD"] = np.zeros(POLAR_POINT_COUNT)
outputs["xfoil:CDp"] = np.zeros(POLAR_POINT_COUNT)
outputs["xfoil:CM"] = np.zeros(POLAR_POINT_COUNT)
outputs["xfoil:alpha"][0:real_length] = result_array["alpha"]
outputs["xfoil:CL"][0:real_length] = result_array["CL"]
outputs["xfoil:CD"][0:real_length] = result_array["CD"]
outputs["xfoil:CDp"][0:real_length] = result_array["CDp"]
outputs["xfoil:CM"][0:real_length] = result_array["CM"]
outputs["xfoil:CL_max_2D"] = cl_max_2d
# Getting output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
if pth.exists(tmp_result_file_path):
polar_file_path = pth.join(
result_folder_path, self.options[OPTION_RESULT_POLAR_FILENAME]
)
shutil.move(tmp_result_file_path, polar_file_path)
if pth.exists(self.stdout):
stdout_file_path = pth.join(result_folder_path, _STDOUT_FILE_NAME)
shutil.move(self.stdout, stdout_file_path)
if pth.exists(self.stderr):
stderr_file_path = pth.join(result_folder_path, _STDERR_FILE_NAME)
shutil.move(self.stderr, stderr_file_path)
tmp_directory.cleanup()
def compute(self, inputs, outputs):
# Create result folder first (if it must fail, let it fail as soon as possible)
result_folder_path = self.options[OPTION_RESULT_FOLDER_PATH]
if result_folder_path != "":
os.makedirs(pth.join(result_folder_path, 'ClAlphaWING'),
exist_ok=True)
# Get inputs (and calculate missing ones)
x0_wing = inputs["data:geometry:wing:MAC:leading_edge:x:local"]
l0_wing = inputs["data:geometry:wing:MAC:length"]
width_max = inputs["data:geometry:fuselage:maximum_width"]
y1_wing = width_max / 2.0
y2_wing = inputs["data:geometry:wing:root:y"]
l2_wing = inputs["data:geometry:wing:root:chord"]
y4_wing = inputs["data:geometry:wing:tip:y"]
l4_wing = inputs["data:geometry:wing:tip:chord"]
sweep_0_wing = inputs["data:geometry:wing:sweep_0"]
fa_length = inputs["data:geometry:wing:MAC:at25percent:x"]
sref_wing = inputs['data:geometry:wing:area']
span_wing = inputs['data:geometry:wing:span']
height_max = inputs["data:geometry:fuselage:maximum_height"]
if self.options["low_speed_aero"]:
altitude = 0.0
atm = Atmosphere(altitude)
mach = inputs["data:aerodynamics:low_speed:mach"]
else:
altitude = inputs["data:mission:sizing:main_route:cruise:altitude"]
atm = Atmosphere(altitude)
mach = inputs["data:aerodynamics:cruise:mach"]
# Initial parameters calculation
x_wing = fa_length - x0_wing - 0.25 * l0_wing
z_wing = -(height_max - 0.12 * l2_wing) * 0.5
span2_wing = y4_wing - y2_wing
viscosity = atm.kinematic_viscosity
rho = atm.density
v_inf = max(atm.speed_of_sound * mach, 0.01) # avoid V=0 m/s crashes
reynolds = v_inf * l0_wing / viscosity
# OPENVSP-SCRIPT: Geometry generation ######################################################
# I/O files --------------------------------------------------------------------------------
tmp_directory = self._create_tmp_directory()
# avoid to dump void xternal_code_comp_error.out error file
self.stderr = pth.join(tmp_directory.name, _STDERR_FILE_NAME)
if self.options[OPTION_OPENVSP_EXE_PATH]:
target_directory = pth.abspath(
self.options[OPTION_OPENVSP_EXE_PATH])
else:
target_directory = tmp_directory.name
input_file_list = [
pth.join(target_directory, _INPUT_SCRIPT_FILE_NAME),
pth.join(target_directory, self.options['wing_airfoil_file'])
]
tmp_result_file_path = pth.join(target_directory,
_INPUT_AERO_FILE_NAME + '0.csv')
output_file_list = [tmp_result_file_path]
self.options["external_input_files"] = input_file_list
self.options["external_output_files"] = output_file_list
# Pre-processing (populating temp directory and generate batch file) -----------------------
# Copy resource in temp directory if needed
if not (self.options[OPTION_OPENVSP_EXE_PATH]):
# noinspection PyTypeChecker
copy_resource_folder(openvsp3201, target_directory)
# noinspection PyTypeChecker
copy_resource(resources, self.options['wing_airfoil_file'],
target_directory)
# Create corresponding .bat file
self.options["command"] = [pth.join(target_directory, 'vspscript.bat')]
command = pth.join(target_directory, VSPSCRIPT_EXE_NAME) + ' -script ' \
+ pth.join(target_directory, _INPUT_SCRIPT_FILE_NAME) + ' >nul 2>nul\n'
batch_file = open(self.options["command"][0], "w+")
batch_file.write("@echo off\n")
batch_file.write(command)
batch_file.close()
# standard SCRIPT input file ---------------------------------------------------------------
parser = InputFileGenerator()
with path(local_resources,
_INPUT_SCRIPT_FILE_NAME) as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(input_file_list[0])
parser.mark_anchor("x_wing")
parser.transfer_var(float(x_wing), 0, 5)
parser.mark_anchor("z_wing")
parser.transfer_var(float(z_wing), 0, 5)
parser.mark_anchor("y1_wing")
parser.transfer_var(float(y1_wing), 0, 5)
for i in range(3):
parser.mark_anchor("l2_wing")
parser.transfer_var(float(l2_wing), 0, 5)
parser.reset_anchor()
parser.mark_anchor("span2_wing")
parser.transfer_var(float(span2_wing), 0, 5)
parser.mark_anchor("l4_wing")
parser.transfer_var(float(l4_wing), 0, 5)
parser.mark_anchor("sweep_0_wing")
parser.transfer_var(float(sweep_0_wing), 0, 5)
parser.mark_anchor("airfoil_0_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("airfoil_1_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("airfoil_2_file")
parser.transfer_var(self._rewrite_path(input_file_list[1]), 0, 3)
parser.mark_anchor("csv_file")
parser.transfer_var(self._rewrite_path(tmp_result_file_path), 0, 3)
parser.generate()
# Run SCRIPT --------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Getting input/output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
for file_path in input_file_list:
new_path = pth.join(result_folder_path, 'ClAlphaWING',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
for file_path in output_file_list:
new_path = pth.join(result_folder_path, 'ClAlphaWING',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
# OPENVSP-AERO: aero calculation ############################################################
# I/O files --------------------------------------------------------------------------------
# Duplicate .csv file for multiple run
input_file_list = [tmp_result_file_path]
for idx in range(len(_INPUT_AOAList) - 1):
shutil.copy(
tmp_result_file_path,
pth.join(target_directory,
_INPUT_AERO_FILE_NAME + str(idx + 1) + '.csv'))
input_file_list.append(
pth.join(target_directory,
_INPUT_AERO_FILE_NAME + str(idx + 1) + '.csv'))
output_file_list = []
for idx in range(len(_INPUT_AOAList)):
input_file_list.append(
pth.join(target_directory, _INPUT_AERO_FILE_NAME) + str(idx) +
'.vspaero')
output_file_list.append(
pth.join(target_directory, _INPUT_AERO_FILE_NAME) + str(idx) +
'.polar')
output_file_list.append(
pth.join(target_directory, _INPUT_AERO_FILE_NAME) + '0.lod')
self.options["external_input_files"] = input_file_list
self.options["external_output_files"] = output_file_list
# Pre-processing (create batch file) -------------------------------------------------------
self.options["command"] = [pth.join(target_directory, 'vspaero.bat')]
batch_file = open(self.options["command"][0], "w+")
batch_file.write("@echo off\n")
for idx in range(len(_INPUT_AOAList)):
command = pth.join(target_directory, VSPAERO_EXE_NAME) + ' ' \
+ pth.join(target_directory, _INPUT_AERO_FILE_NAME + str(idx) + ' >nul 2>nul\n')
batch_file.write(command)
batch_file.close()
# standard AERO input file -----------------------------------------------------------------
parser = InputFileGenerator()
for idx in range(len(_INPUT_AOAList)):
with path(local_resources, _INPUT_AERO_FILE_NAME +
'.vspaero') as input_template_path:
parser.set_template_file(str(input_template_path))
parser.set_generated_file(input_file_list[len(_INPUT_AOAList) +
idx])
parser.reset_anchor()
parser.mark_anchor("Sref")
parser.transfer_var(float(sref_wing), 0, 3)
parser.mark_anchor("Cref")
parser.transfer_var(float(l0_wing), 0, 3)
parser.mark_anchor("Bref")
parser.transfer_var(float(span_wing), 0, 3)
parser.mark_anchor("X_cg")
parser.transfer_var(float(fa_length), 0, 3)
parser.mark_anchor("Mach")
parser.transfer_var(float(mach), 0, 3)
parser.mark_anchor("AOA")
parser.transfer_var(float(_INPUT_AOAList[idx]), 0, 3)
parser.mark_anchor("Vinf")
parser.transfer_var(float(v_inf), 0, 3)
parser.mark_anchor("Rho")
parser.transfer_var(float(rho), 0, 3)
parser.mark_anchor("ReCref")
parser.transfer_var(float(reynolds), 0, 3)
parser.generate()
# Run AERO --------------------------------------------------------------------------------
super().compute(inputs, outputs)
# Post-processing --------------------------------------------------------------------------
result_cl = []
for idx in range(len(_INPUT_AOAList)):
cl, _, _, _ = self._read_polar_file(output_file_list[idx])
result_cl.append(cl)
# Fuselage correction
k_fus = 1 + 0.025 * width_max / span_wing - 0.025 * (width_max /
span_wing)**2
cl_0 = float(result_cl[0] * k_fus)
cl_1 = float(result_cl[1] * k_fus)
# Calculate derivative
cl_alpha = (cl_1 - cl_0) / (
(_INPUT_AOAList[1] - _INPUT_AOAList[0]) * math.pi / 180)
# Get lift curve
y_vector, cl_vector = self._read_lod_file(output_file_list[-1])
real_length = min(SPAN_MESH_POINT_OPENVSP, len(y_vector))
if real_length < len(y_vector):
warnings.warn(
"Defined maximum span mesh in constants.py exceeded!")
if self.options["low_speed_aero"]:
outputs['data:aerodynamics:aircraft:low_speed:CL0_clean'] = cl_0
outputs['data:aerodynamics:aircraft:low_speed:CL_alpha'] = cl_alpha
if real_length >= len(y_vector):
outputs[
'data:aerodynamics:wing:low_speed:Y_vector'] = np.zeros(
SPAN_MESH_POINT_OPENVSP)
outputs[
'data:aerodynamics:wing:low_speed:CL_vector'] = np.zeros(
SPAN_MESH_POINT_OPENVSP)
outputs['data:aerodynamics:wing:low_speed:Y_vector'][
0:real_length] = y_vector
outputs['data:aerodynamics:wing:low_speed:CL_vector'][
0:real_length] = cl_vector
else:
outputs[
'data:aerodynamics:aircraft:wing:Y_vector'] = np.linspace(
y_vector[0], y_vector[1], SPAN_MESH_POINT_OPENVSP)
outputs['data:aerodynamics:aircraft:wing:CL_vector'] = \
np.interp(outputs['data:aerodynamics:aircraft:low_speed:Y_vector'], y_vector, cl_vector)
else:
outputs['data:aerodynamics:aircraft:cruise:CL0_clean'] = cl_0
outputs['data:aerodynamics:aircraft:cruise:CL_alpha'] = cl_alpha
# Getting input/output files if needed
if self.options[OPTION_RESULT_FOLDER_PATH] != "":
for file_path in input_file_list:
new_path = pth.join(result_folder_path, 'ClAlphaWING',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
for file_path in output_file_list:
new_path = pth.join(result_folder_path, 'ClAlphaWING',
pth.split(file_path)[1])
if pth.exists(file_path):
shutil.copyfile(file_path, new_path)
# Delete temporary directory
tmp_directory.cleanup()