def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "GID_SL Request Form", addSpace=False, orientation="vertical",
width=500, height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs, "Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template, "", addSpace=False, orientation="vertical", width=480, height=670)
gui.separator(left_box_1_1)
gui.comboBox(left_box_1_1, self, "template_type", label="Template Type", labelWidth=100,
items=["Simplified (coplanar geometries only)", "Full"],
callback=self.set_TemplateType, sendSelectedValue=False, orientation="horizontal")
self.simplified_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.simplified_box, self, "simplified_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Symmetric Bragg diffraction at Bragg angle of 90 degrees (\"back diffraction\")",
"Energy scanning of symmetric Bragg diffraction peaks"],
callback=self.set_SimplifiedForm)
self.full_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.full_box, self, "full_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Coplanar extremely asymmetric diffraction of synchrotron radiation",
"Grazing incidence (\"surface\") diffraction from perfect crystals",
"Grazing incidence (\"surface\") diffraction from multilayers in the scheme\nwith position sensitive detector (PSD)",
"Non-coplanar Bragg-Laue diffraction from crystals with a few degrees\nsurface miscut"],
callback=self.set_FullForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(left_box_2_1, self, "xway", label="X-rays specified by",
items=["Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)", "X-ray line"],
callback=self.set_xway, sendSelectedValue=False, orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
oasysgui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1, self, "ipol", label="Polarization",
items=["Sigma", "Pi", "Mixed"], sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_3_1 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
XRayServerGui.combobox_text(left_box_3_1, self, "code", label="Crystal", labelWidth=40,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button(left_box_3_1, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(left_box_3_1, self, "df1df2", label=" ", labelWidth=20,
items=["Auto DB for f\', f\'\'",
"X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)",
"Brennan (0.02-400 A)"],
sendSelectedValue=False, orientation="horizontal")
left_box_3_2 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(left_box_3_2, self, "sigma", label="Sigma", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3_2, self, "w0", label="A W0", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_3_2, self, "wh", label=" Wh", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=240)
oasysgui.lineEdit(left_box_4_1, self, "i1", label="Bragg Reflection", labelWidth=97, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1, self, "i2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1, self, "i3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
left_box_4_2 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=228)
oasysgui.lineEdit(left_box_4_2, self, "daa", label=" Substrate da/a", labelWidth=135, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.simplified_input_box = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470, height=290)
gui.comboBox(self.simplified_input_box, self, "igie", label="Geometry specified by",
items=["angle of Bragg planes to surface ('+' for g0>gh)",
"incidence angle of K0",
"exit angle of Kh",
"asymmetry factor beta=g0/gh"],
callback=self.set_igie_s, sendSelectedValue=False, orientation="horizontal")
simplified_input_box_1 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(simplified_input_box_1, self, "fcentre", label="Value", labelWidth=280, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_s = gui.comboBox(simplified_input_box_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_s()
simplified_input_box_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(simplified_input_box_2, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(simplified_input_box_2, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
self.simplified_input_box_scan_1_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_1_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(self.simplified_input_box_scan_1_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_1_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.checkBox(self.simplified_input_box_scan_1_2, self, "invert", "Invert axis", labelWidth=190)
gui.comboBox(self.simplified_input_box_scan_1_2, self, "column", label="Plot argument", labelWidth=100,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
self.simplified_input_box_scan_2_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
self.unis_combo_s = gui.comboBox(self.simplified_input_box_scan_2_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad",
"eV"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(self.simplified_input_box_scan_2_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_2_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_2_2, self, "axis", label="Scan Type", labelWidth=290,
items=["[k0 x h]",
"Energy (eV)",
"Energy (eV), no X0h recalc"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_s)
self.set_scan_type_s()
# -------------------------------------------------------------
# -------------------------------------------------------------
self.full_input_box = oasysgui.widgetBox(tab_input, "", addSpace=True, orientation="vertical", width=470, height=290)
gui.comboBox(self.full_input_box, self, "igie", label="Geom. by", labelWidth=60,
items=["[1]. Surface orientation & incidence angle of K0",
"[2]. Surface orientation & exit angle of Kh",
"[3]. Surface orientation & condition of coplanar grazing incidence",
"[4]. Surface orientation & condition of coplanar grazing exit",
"[5]. Surface orientation & condition of symmetric Bragg case",
"[6]. Condition of coplanar reflection & angle of Bragg planes to surface",
"[7]. Condition of coplanar reflection & incidence angle of K0",
"[8]. Condition of coplanar reflection & exit angle of Kh",
"[9]. Condition of coplanar reflection & asymmetry factor beta=g0/gh"],
callback=self.set_igie_f, sendSelectedValue=False, orientation="horizontal")
gui.label(self.full_input_box, self, "-- Geom. parameter ([1,7]=incidence angle, [2,8]=exit angle, [6]=Bragg planes")
full_input_box_1 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_1_1 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=470)
self.le_fcentre = oasysgui.lineEdit(full_input_box_1_1, self, "fcentre", label=" angle, [9]=g0/gh)",
labelWidth=250, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_f = gui.comboBox(full_input_box_1_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_f()
full_input_box_1_2 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(full_input_box_1_2, self, "n1", label="-- Surface plane ([1-5])", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_1_2, self, "n2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_1_2, self, "n3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="horizontal", width=470)
full_input_box_2_1 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(full_input_box_2_1, self, "m1", label="Miscut direction", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_2_1, self, "m2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
oasysgui.lineEdit(full_input_box_2_1, self, "m3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2_2 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal")
oasysgui.lineEdit(full_input_box_2_2, self, "miscut", label="Miscut angle", addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_2_2, self, "unim", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
full_input_box_3 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_3_1 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_3_1, self, "axis", label="Scan Type", labelWidth=190,
items=["Surface normal (N_surface)",
"[k0 x N_surface]",
"Reciprocal latt.vector (h)",
"[k0 x h]",
"Other axis",
"Takeoff spectrum (PSD)"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_f)
gui.checkBox(full_input_box_3_1, self, "invert", "Invert axis", labelWidth=90)
full_input_box_3_2 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
self.le_a1 = oasysgui.lineEdit(full_input_box_3_2, self, "a1", label="Indices, if other scan axis", labelWidth=290, addSpace=False, valueType=int, orientation="horizontal")
self.le_a2 = oasysgui.lineEdit(full_input_box_3_2, self, "a2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.le_a3 = oasysgui.lineEdit(full_input_box_3_2, self, "a3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.set_scan_type_f()
full_input_box_5 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_5_1 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(full_input_box_5_1, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(full_input_box_5_1, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_5_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(full_input_box_5_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_5_2 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_5_2, self, "column", label="Plot argument", labelWidth=290,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
box_alpha = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=280)
self.le_alphamax = oasysgui.lineEdit(box_alpha, self, "alphamax", label="Approximations: alpha_max", labelWidth=170, addSpace=False, valueType=float, orientation="horizontal")
gui.label(box_alpha, self, "*|xh|")
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
box_top_0 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_0_1 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="vertical", width=100)
gui.label(box_top_0_1, self, "Top layer profile\n(optional):")
button = gui.button(box_top_0_1, self, "? (sintax)", callback=self.help_profile)
button.setFixedWidth(90)
box_top_0_2 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="horizontal", width=360)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setStyleSheet("background-color: white;")
self.profile_area.setMaximumHeight(110)
self.profile_area.setMaximumWidth(360)
box_top_0_2.layout().addWidget(self.profile_area)
box_top_labels = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_labels_1 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=100)
gui.label(box_top_labels_1, self, "Available Codes:")
box_top_labels_2 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=360)
gui.label(box_top_labels_2, self, "Crystals")
gui.label(box_top_labels_2, self, "Non-Crystals")
gui.label(box_top_labels_2, self, "Elements")
box_top_1 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=100)
box_top_1_2 = oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=360)
crystals_area = QtWidgets.QTextEdit()
crystals_area.setStyleSheet("background-color: white;")
crystals_area.setMaximumHeight(100)
crystals_area.setMaximumWidth(120)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
non_crystals_area = QtWidgets.QTextEdit()
non_crystals_area.setStyleSheet("background-color: white;")
non_crystals_area.setMaximumHeight(100)
non_crystals_area.setMaximumWidth(120)
non_crystals_area.setText("\n".join(ListUtility.get_list("amorphous")))
non_crystals_area.setReadOnly(True)
elements_area = QtWidgets.QTextEdit()
elements_area.setStyleSheet("background-color: white;")
elements_area.setMaximumHeight(100)
elements_area.setMaximumWidth(120)
elements_area.setText("\n".join(ListUtility.get_list("atoms")))
elements_area.setReadOnly(True)
box_top_1_2.layout().addWidget(crystals_area)
box_top_1_2.layout().addWidget(non_crystals_area)
box_top_1_2.layout().addWidget(elements_area)
# -----------------------------------------------------------
button = gui.button(tab_input, self, "Submit Query!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TemplateType(change_values=False)
self.profile_area.textChanged.connect(self.set_profile)
self.le_alphamax.focusOutEvent = self.alphamax_focusOutEvent
self.alphamax_focusOutEvent(None)
gui.rubber(self.mainArea)
def help_others(self):
ShowTextDialog.show_text("Help Others",
ListUtility.get_help("amorphous+atoms"),
parent=self)
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "TER_SL Request Form", addSpace=False, orientation="vertical",
width=500, height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs, "Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template, "", addSpace=False, orientation="vertical", width=480, height=670)
gui.separator(left_box_1_1)
ter_sl_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(ter_sl_box, self, "ter_sl_form",
["Specular reflection from perfect reflectors",
"Specular reflection from multilayers",
"Specular reflection from perfect reflectors + standing waves",
"Specular reflection from multilayers + standing waves"],
callback=self.set_TerSLForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(left_box_2_1, self, "xway", label="X-rays specified by",
items=["Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)", "X-ray line"],
callback=self.set_xway, sendSelectedValue=False, orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
oasysgui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1, self, "ipol", label="Polarization",
items=["Sigma", "Pi", "Mixed"], sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input, "", addSpace=True, orientation="vertical", width=470)
gui.separator(left_box_3, height=4)
left_box_3_top = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.label(left_box_3_top, self, "Substrate:")
left_box_3_content = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
left_box_3_left = oasysgui.widgetBox(left_box_3_content, "", addSpace=False, orientation="vertical", width=20)
left_box_3_right = oasysgui.widgetBox(left_box_3_content, "", addSpace=False, orientation="vertical", width=445)
gui.radioButtons(left_box_3_left, self, "subway", [" ", " ", " "], callback=self.set_subway)
self.left_box_3_1 = oasysgui.widgetBox(left_box_3_right, "", addSpace=False, orientation="horizontal", width=445)
XRayServerGui.combobox_text(self.left_box_3_1, self, "code", label="Crystal", labelWidth=45,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button(self.left_box_3_1, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(self.left_box_3_1, self, "df1df2", label=" ", labelWidth=1,
items=["Auto DB for f\', f\'\'",
"X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)",
"Brennan (0.02-400 A)"],
sendSelectedValue=False, orientation="horizontal")
self.left_box_3_2 = oasysgui.widgetBox(left_box_3_right, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(self.left_box_3_2, self, "chem", label="Chemical Formula", labelWidth=110, addSpace=False, valueType=str, orientation="horizontal", callback=self.set_rho)
oasysgui.lineEdit(self.left_box_3_2, self, "rho", label=u"\u03C1" + " (g/cm3)", labelWidth=60, addSpace=False, valueType=float, orientation="horizontal")
self.left_box_3_3 = oasysgui.widgetBox(left_box_3_right, "", addSpace=False, orientation="vertical", width=445)
left_box_3_3_1 = oasysgui.widgetBox(self.left_box_3_3, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(left_box_3_3_1, self, "x0", label="Susceptibility x0 (", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(left_box_3_3_1, self, " ) format: x0=(Re(x0), Im(x0))", labelWidth=230 )
left_box_3_3_2 = oasysgui.widgetBox(self.left_box_3_3, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(left_box_3_3_2, self, "w0", label="x0 correction: w0", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(left_box_3_3_2, self, " this is used as: x0 = w0 * x0", labelWidth=230)
left_box_3_3_3 = oasysgui.widgetBox(self.left_box_3_3, "", addSpace=False, orientation="horizontal", width=445)
oasysgui.lineEdit(left_box_3_3_3, self, "sigma", label="Roughness: sigma [Å]", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(left_box_3_3_3, self, " OR ")
oasysgui.lineEdit(left_box_3_3_3, self, "tr", label="Transition layer tr [Å]", labelWidth=120, addSpace=False, valueType=float, orientation="horizontal")
self.set_subway()
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="vertical", width=470)
gui.label(left_box_4_1, self, "Incidence angle limits:")
left_box_4_1_1 = oasysgui.widgetBox(left_box_4_1, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.lineEdit(left_box_4_1_1, self, "scanmin", label=" From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1_1, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(left_box_4_1_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
oasysgui.lineEdit(left_box_4_1_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.standing_waves_box = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470, height=140)
self.standing_waves_box_hidden = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470, height=140)
gui.separator(self.standing_waves_box, 10)
standing_waves_box_1 = oasysgui.widgetBox(self.standing_waves_box, "", addSpace=False, orientation="horizontal", width=120)
gui.checkBox(standing_waves_box_1, self, "swflag", "", callback=self.set_swflag)
gui.label(standing_waves_box_1, self, "Standing waves:")
self.standing_waves_box_2 = oasysgui.widgetBox(self.standing_waves_box, "", addSpace=False, orientation="vertical", width=470)
standing_waves_box_2_1 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_1, self, "swref", label="Reference interface", labelWidth=130, addSpace=False, valueType=int, orientation="horizontal")
gui.label(standing_waves_box_2_1, self, " (0=surface)")
standing_waves_box_2_2 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_2, self, "swmin", label="Start offset", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(standing_waves_box_2_2, self, " [Å]", labelWidth=70)
standing_waves_box_2_3 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_3, self, "swmax", label="End offset", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(standing_waves_box_2_3, self, " [Å]", labelWidth=70)
standing_waves_box_2_4 = oasysgui.widgetBox(self.standing_waves_box_2, "", addSpace=False, orientation="horizontal", width=270)
oasysgui.lineEdit(standing_waves_box_2_4, self, "swpts", label="Number of offsets", labelWidth=130, addSpace=False, valueType=float, orientation="horizontal")
gui.label(standing_waves_box_2_4, self, " (max = 401)")
self.set_swflag()
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
box_top_0 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=250)
gui.label(box_top_0, self, "Top layer profile (optional):")
button = gui.button(box_top_0, self, "? (sintax)", callback=self.help_profile)
button.setFixedWidth(90)
box_top_1 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setStyleSheet("background-color: white;")
self.profile_area.setMaximumHeight(240)
self.profile_area.setMaximumWidth(335)
self.profile_area.setLineWrapMode(QtWidgets.QTextEdit.NoWrap)
box_top_1.layout().addWidget(self.profile_area)
gui.separator(box_top_1)
box_top_labels = oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="vertical", width=130)
gui.label(box_top_labels, self, "Available Codes:")
crystals_area = QtWidgets.QTextEdit()
crystals_area.setStyleSheet("background-color: white;")
crystals_area.setMaximumHeight(295)
crystals_area.setMaximumWidth(130)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
box_top_labels.layout().addWidget(crystals_area)
gui.separator(box_top)
# -----------------------------------------------------------
button = gui.button(tab_input, self, "Submit Query!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TerSLForm(change_values=False, switch_page=False)
self.profile_area.textChanged.connect(self.set_profile)
def help_crystals(self):
ShowTextDialog.show_text("Help Crystals",
ListUtility.get_help("crystals"),
parent=self)
def get_others(self):
return ListUtility.get_list("amorphous+atoms")
def help_lines(self):
ShowTextDialog.show_text("Help Waves",
ListUtility.get_help("waves"),
width=350,
parent=self)
def get_crystals(self):
return ListUtility.get_list("crystals")
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea, "GID_SL Request Form", addSpace=False, orientation="vertical",
width=500, height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs, "Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template, "", addSpace=False, orientation="vertical", width=480, height=670)
gui.separator(left_box_1_1)
gui.comboBox(left_box_1_1, self, "template_type", label="Template Type", labelWidth=100,
items=["Simplified (coplanar geometries only)", "Full"],
callback=self.set_TemplateType, sendSelectedValue=False, orientation="horizontal")
self.simplified_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.simplified_box, self, "simplified_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Symmetric Bragg diffraction at Bragg angle of 90 degrees (\"back diffraction\")",
"Energy scanning of symmetric Bragg diffraction peaks"],
callback=self.set_SimplifiedForm)
self.full_box = oasysgui.widgetBox(left_box_1_1, "", addSpace=False, orientation="horizontal", width=470, height=220)
gui.radioButtons(self.full_box, self, "full_form",
["Symmetric Bragg diffraction from perfect crystals",
"Symmetric Bragg diffraction from multilayers and superlattices",
"Coplanar extremely asymmetric diffraction of synchrotron radiation",
"Grazing incidence (\"surface\") diffraction from perfect crystals",
"Grazing incidence (\"surface\") diffraction from multilayers in the scheme\nwith position sensitive detector (PSD)",
"Non-coplanar Bragg-Laue diffraction from crystals with a few degrees\nsurface miscut"],
callback=self.set_FullForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(left_box_2_1, self, "xway", label="X-rays specified by",
items=["Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)", "X-ray line"],
callback=self.set_xway, sendSelectedValue=False, orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
gui.lineEdit(self.box_wave, self, "wave", label="", labelWidth=0, addSpace=False, valueType=float, orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1, "", addSpace=False, orientation="horizontal", width=100)
XRayServerGui.combobox_text(self.box_line, self, "line", label="", labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1, self, "ipol", label="Polarization",
items=["Sigma", "Pi", "Mixed"], sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
left_box_3_1 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
XRayServerGui.combobox_text(left_box_3_1, self, "code", label="Crystal", labelWidth=40,
items=self.get_crystals(),
sendSelectedValue=True, orientation="horizontal", selectedValue=self.code)
button = gui.button(left_box_3_1, self, "?", callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(left_box_3_1, self, "df1df2", label=" ", labelWidth=20,
items=["Auto DB for f\', f\'\'",
"X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)",
"Brennan (0.02-400 A)"],
sendSelectedValue=False, orientation="horizontal")
left_box_3_2 = oasysgui.widgetBox(left_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(left_box_3_2, self, "sigma", label="Sigma", labelWidth=80, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(left_box_3_2, self, "w0", label="A W0", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(left_box_3_2, self, "wh", label=" Wh", labelWidth=50, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=240)
gui.lineEdit(left_box_4_1, self, "i1", label="Bragg Reflection", labelWidth=97, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(left_box_4_1, self, "i2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(left_box_4_1, self, "i3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
left_box_4_2 = oasysgui.widgetBox(left_box_4, "", addSpace=False, orientation="horizontal", width=228)
gui.lineEdit(left_box_4_2, self, "daa", label=" Substrate da/a", labelWidth=135, addSpace=False, valueType=float, orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.simplified_input_box = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470, height=290)
gui.comboBox(self.simplified_input_box, self, "igie", label="Geometry specified by",
items=["angle of Bragg planes to surface ('+' for g0>gh)",
"incidence angle of K0",
"exit angle of Kh",
"asymmetry factor beta=g0/gh"],
callback=self.set_igie_s, sendSelectedValue=False, orientation="horizontal")
simplified_input_box_1 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(simplified_input_box_1, self, "fcentre", label="Value", labelWidth=280, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_s = gui.comboBox(simplified_input_box_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_s()
simplified_input_box_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(simplified_input_box_2, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(simplified_input_box_2, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
self.simplified_input_box_scan_1_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_1_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
gui.lineEdit(self.simplified_input_box_scan_1_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_1_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal", width=470)
gui.checkBox(self.simplified_input_box_scan_1_2, self, "invert", "Invert axis", labelWidth=190)
gui.comboBox(self.simplified_input_box_scan_1_2, self, "column", label="Plot argument", labelWidth=100,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
self.simplified_input_box_scan_2_1 = oasysgui.widgetBox(simplified_input_box_2, "", addSpace=False, orientation="horizontal")
self.unis_combo_s = gui.comboBox(self.simplified_input_box_scan_2_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad",
"eV"],
sendSelectedValue=False, orientation="horizontal")
gui.lineEdit(self.simplified_input_box_scan_2_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
self.simplified_input_box_scan_2_2 = oasysgui.widgetBox(self.simplified_input_box, "", addSpace=False, orientation="horizontal")
gui.comboBox(self.simplified_input_box_scan_2_2, self, "axis", label="Scan Type", labelWidth=290,
items=["[k0 x h]",
"Energy (eV)",
"Energy (eV), no X0h recalc"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_s)
self.set_scan_type_s()
# -------------------------------------------------------------
# -------------------------------------------------------------
self.full_input_box = oasysgui.widgetBox(tab_input, "", addSpace=True, orientation="vertical", width=470, height=290)
gui.comboBox(self.full_input_box, self, "igie", label="Geom. by", labelWidth=60,
items=["[1]. Surface orientation & incidence angle of K0",
"[2]. Surface orientation & exit angle of Kh",
"[3]. Surface orientation & condition of coplanar grazing incidence",
"[4]. Surface orientation & condition of coplanar grazing exit",
"[5]. Surface orientation & condition of symmetric Bragg case",
"[6]. Condition of coplanar reflection & angle of Bragg planes to surface",
"[7]. Condition of coplanar reflection & incidence angle of K0",
"[8]. Condition of coplanar reflection & exit angle of Kh",
"[9]. Condition of coplanar reflection & asymmetry factor beta=g0/gh"],
callback=self.set_igie_f, sendSelectedValue=False, orientation="horizontal")
gui.label(self.full_input_box, self, "-- Geom. parameter ([1,7]=incidence angle, [2,8]=exit angle, [6]=Bragg planes")
full_input_box_1 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_1_1 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=470)
self.le_fcentre = gui.lineEdit(full_input_box_1_1, self, "fcentre", label=" angle, [9]=g0/gh)",
labelWidth=250, addSpace=False, valueType=float, orientation="horizontal")
self.unic_combo_f = gui.comboBox(full_input_box_1_1, self, "unic", label=" ", labelWidth=1,
items=[" ",
"degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
self.set_igie_f()
full_input_box_1_2 = oasysgui.widgetBox(full_input_box_1, "", addSpace=False, orientation="horizontal", width=270)
gui.lineEdit(full_input_box_1_2, self, "n1", label="-- Surface plane ([1-5])", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_1_2, self, "n2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_1_2, self, "n3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="horizontal", width=470)
full_input_box_2_1 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal", width=270)
gui.lineEdit(full_input_box_2_1, self, "m1", label="Miscut direction", labelWidth=135, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_2_1, self, "m2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
gui.lineEdit(full_input_box_2_1, self, "m3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_2_2 = oasysgui.widgetBox(full_input_box_2, "", addSpace=False, orientation="horizontal")
gui.lineEdit(full_input_box_2_2, self, "miscut", label="Miscut angle", addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_2_2, self, "unim", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
full_input_box_3 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_3_1 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_3_1, self, "axis", label="Scan Type", labelWidth=190,
items=["Surface normal (N_surface)",
"[k0 x N_surface]",
"Reciprocal latt.vector (h)",
"[k0 x h]",
"Other axis",
"Takeoff spectrum (PSD)"],
sendSelectedValue=False, orientation="horizontal", callback=self.set_scan_type_f)
gui.checkBox(full_input_box_3_1, self, "invert", "Invert axis", labelWidth=90)
full_input_box_3_2 = oasysgui.widgetBox(full_input_box_3, "", addSpace=False, orientation="horizontal", width=470)
self.le_a1 = gui.lineEdit(full_input_box_3_2, self, "a1", label="Indices, if other scan axis", labelWidth=290, addSpace=False, valueType=int, orientation="horizontal")
self.le_a2 = gui.lineEdit(full_input_box_3_2, self, "a2", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.le_a3 = gui.lineEdit(full_input_box_3_2, self, "a3", label=" ", labelWidth=1, addSpace=False, valueType=int, orientation="horizontal")
self.set_scan_type_f()
full_input_box_5 = oasysgui.widgetBox(self.full_input_box, "", addSpace=False, orientation="vertical", width=470)
full_input_box_5_1 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
gui.lineEdit(full_input_box_5_1, self, "scanmin", label="Scan: From", labelWidth=70, addSpace=False, valueType=float, orientation="horizontal")
gui.lineEdit(full_input_box_5_1, self, "scanmax", label="To", labelWidth=15, addSpace=False, valueType=float, orientation="horizontal")
gui.comboBox(full_input_box_5_1, self, "unis", label=" ", labelWidth=1,
items=["degr.",
"min.",
"mrad.",
"sec.",
"urad"],
sendSelectedValue=False, orientation="horizontal")
gui.lineEdit(full_input_box_5_1, self, "nscan", label="Points", labelWidth=40, addSpace=False, valueType=int, orientation="horizontal")
full_input_box_5_2 = oasysgui.widgetBox(full_input_box_5, "", addSpace=False, orientation="horizontal", width=470)
gui.comboBox(full_input_box_5_2, self, "column", label="Plot argument", labelWidth=290,
items=["scan angle",
"incidence angle",
"exit angle"],
sendSelectedValue=False, orientation="horizontal")
# -------------------------------------------------------------
box_alpha = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="horizontal", width=280)
self.le_alphamax = gui.lineEdit(box_alpha, self, "alphamax", label="Approximations: alpha_max", labelWidth=170, addSpace=False, valueType=float, orientation="horizontal")
gui.label(box_alpha, self, "*|xh|")
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input, "", addSpace=False, orientation="vertical", width=470)
box_top_0 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_0_1 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="vertical", width=100)
gui.label(box_top_0_1, self, "Top layer profile\n(optional):")
button = gui.button(box_top_0_1, self, "? (sintax)", callback=self.help_profile)
button.setFixedWidth(90)
box_top_0_2 = oasysgui.widgetBox(box_top_0, "", addSpace=False, orientation="horizontal", width=360)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setMaximumHeight(110)
self.profile_area.setMaximumWidth(360)
box_top_0_2.layout().addWidget(self.profile_area)
box_top_labels = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
box_top_labels_1 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=100)
gui.label(box_top_labels_1, self, "Available Codes:")
box_top_labels_2 = oasysgui.widgetBox(box_top_labels, "", addSpace=False, orientation="horizontal", width=360)
gui.label(box_top_labels_2, self, "Crystals")
gui.label(box_top_labels_2, self, "Non-Crystals")
gui.label(box_top_labels_2, self, "Elements")
box_top_1 = oasysgui.widgetBox(box_top, "", addSpace=False, orientation="horizontal", width=470)
oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=100)
box_top_1_2 = oasysgui.widgetBox(box_top_1, "", addSpace=False, orientation="horizontal", width=360)
crystals_area = QtWidgets.QTextEdit()
crystals_area.setMaximumHeight(100)
crystals_area.setMaximumWidth(120)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
non_crystals_area = QtWidgets.QTextEdit()
non_crystals_area.setMaximumHeight(100)
non_crystals_area.setMaximumWidth(120)
non_crystals_area.setText("\n".join(ListUtility.get_list("amorphous")))
non_crystals_area.setReadOnly(True)
elements_area = QtWidgets.QTextEdit()
elements_area.setMaximumHeight(100)
elements_area.setMaximumWidth(120)
elements_area.setText("\n".join(ListUtility.get_list("atoms")))
elements_area.setReadOnly(True)
box_top_1_2.layout().addWidget(crystals_area)
box_top_1_2.layout().addWidget(non_crystals_area)
box_top_1_2.layout().addWidget(elements_area)
# -----------------------------------------------------------
button = gui.button(tab_input, self, "Submit Query!", callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TemplateType(change_values=False)
self.profile_area.textChanged.connect(self.set_profile)
self.le_alphamax.focusOutEvent = self.alphamax_focusOutEvent
self.alphamax_focusOutEvent(None)
gui.rubber(self.mainArea)
def get_lines(self):
return ListUtility.get_list("waves")
def get_others(self):
return ListUtility.get_list("amorphous+atoms")
def help_others(self):
ShowTextDialog.show_text("Help Others", ListUtility.get_help("amorphous+atoms"), parent=self)
def help_crystals(self):
ShowTextDialog.show_text("Help Crystals", ListUtility.get_help("crystals"), parent=self)
def get_crystals(self):
return ListUtility.get_list("crystals")
def help_lines(self):
ShowTextDialog.show_text("Help Waves", ListUtility.get_help("waves"), width=350, parent=self)
def get_lines(self):
return ListUtility.get_list("waves")
def __init__(self):
super().__init__()
left_box_1 = oasysgui.widgetBox(self.controlArea,
"TER_SL Request Form",
addSpace=False,
orientation="vertical",
width=500,
height=680)
self.central_tabs = oasysgui.tabWidget(left_box_1)
tab_template = oasysgui.createTabPage(self.central_tabs,
"Template Options")
tab_input = oasysgui.createTabPage(self.central_tabs, "Input Options")
left_box_1_1 = oasysgui.widgetBox(tab_template,
"",
addSpace=False,
orientation="vertical",
width=480,
height=670)
gui.separator(left_box_1_1)
ter_sl_box = oasysgui.widgetBox(left_box_1_1,
"",
addSpace=False,
orientation="horizontal",
width=470,
height=220)
gui.radioButtons(
ter_sl_box,
self,
"ter_sl_form", [
"Specular reflection from perfect reflectors",
"Specular reflection from multilayers",
"Specular reflection from perfect reflectors + standing waves",
"Specular reflection from multilayers + standing waves"
],
callback=self.set_TerSLForm)
# -------------------------------------------------------------
# -------------------------------------------------------------
# -------------------------------------------------------------
gui.separator(tab_input)
left_box_2 = oasysgui.widgetBox(tab_input,
"",
addSpace=False,
orientation="vertical",
width=470)
left_box_2_1 = oasysgui.widgetBox(left_box_2,
"",
addSpace=False,
orientation="horizontal",
width=470)
gui.comboBox(left_box_2_1,
self,
"xway",
label="X-rays specified by",
items=[
"Wavelength (Å)", "Energy (keV)", "Bragg angle (deg)",
"X-ray line"
],
callback=self.set_xway,
sendSelectedValue=False,
orientation="horizontal")
self.box_wave = oasysgui.widgetBox(left_box_2_1,
"",
addSpace=False,
orientation="horizontal",
width=100)
gui.lineEdit(self.box_wave,
self,
"wave",
label="",
labelWidth=0,
addSpace=False,
valueType=float,
orientation="horizontal")
self.box_line = oasysgui.widgetBox(left_box_2_1,
"",
addSpace=False,
orientation="horizontal",
width=100)
XRayServerGui.combobox_text(self.box_line,
self,
"line",
label="",
labelWidth=0,
items=self.get_lines(),
sendSelectedValue=True,
orientation="horizontal",
selectedValue=self.line)
button = gui.button(self.box_line, self, "?", callback=self.help_lines)
button.setFixedWidth(15)
self.set_xway()
gui.comboBox(left_box_2_1,
self,
"ipol",
label="Polarization",
items=["Sigma", "Pi", "Mixed"],
sendSelectedValue=False,
orientation="horizontal")
# -------------------------------------------------------------
left_box_3 = oasysgui.widgetBox(tab_input,
"",
addSpace=True,
orientation="vertical",
width=470)
gui.separator(left_box_3, height=4)
left_box_3_top = oasysgui.widgetBox(left_box_3,
"",
addSpace=False,
orientation="horizontal",
width=470)
gui.label(left_box_3_top, self, "Substrate:")
left_box_3_content = oasysgui.widgetBox(left_box_3,
"",
addSpace=False,
orientation="horizontal",
width=470)
left_box_3_left = oasysgui.widgetBox(left_box_3_content,
"",
addSpace=False,
orientation="vertical",
width=20)
left_box_3_right = oasysgui.widgetBox(left_box_3_content,
"",
addSpace=False,
orientation="vertical",
width=445)
gui.radioButtons(left_box_3_left,
self,
"subway", [" ", " ", " "],
callback=self.set_subway)
self.left_box_3_1 = oasysgui.widgetBox(left_box_3_right,
"",
addSpace=False,
orientation="horizontal",
width=445)
XRayServerGui.combobox_text(self.left_box_3_1,
self,
"code",
label="Crystal",
labelWidth=45,
items=self.get_crystals(),
sendSelectedValue=True,
orientation="horizontal",
selectedValue=self.code)
button = gui.button(self.left_box_3_1,
self,
"?",
callback=self.help_crystals)
button.setFixedWidth(15)
gui.comboBox(self.left_box_3_1,
self,
"df1df2",
label=" ",
labelWidth=1,
items=[
"Auto DB for f\', f\'\'", "X0h data (0.5-2.5 A)",
"Henke (0.4-1200 A)", "Brennan (0.02-400 A)"
],
sendSelectedValue=False,
orientation="horizontal")
self.left_box_3_2 = oasysgui.widgetBox(left_box_3_right,
"",
addSpace=False,
orientation="horizontal",
width=445)
gui.lineEdit(self.left_box_3_2,
self,
"chem",
label="Chemical Formula",
labelWidth=110,
addSpace=False,
valueType=str,
orientation="horizontal",
callback=self.set_rho)
gui.lineEdit(self.left_box_3_2,
self,
"rho",
label=u"\u03C1" + " (g/cm3)",
labelWidth=60,
addSpace=False,
valueType=float,
orientation="horizontal")
self.left_box_3_3 = oasysgui.widgetBox(left_box_3_right,
"",
addSpace=False,
orientation="vertical",
width=445)
left_box_3_3_1 = oasysgui.widgetBox(self.left_box_3_3,
"",
addSpace=False,
orientation="horizontal",
width=445)
gui.lineEdit(left_box_3_3_1,
self,
"x0",
label="Susceptibility x0 (",
labelWidth=130,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.label(left_box_3_3_1,
self,
" ) format: x0=(Re(x0), Im(x0))",
labelWidth=230)
left_box_3_3_2 = oasysgui.widgetBox(self.left_box_3_3,
"",
addSpace=False,
orientation="horizontal",
width=445)
gui.lineEdit(left_box_3_3_2,
self,
"w0",
label="x0 correction: w0",
labelWidth=130,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.label(left_box_3_3_2,
self,
" this is used as: x0 = w0 * x0",
labelWidth=230)
left_box_3_3_3 = oasysgui.widgetBox(self.left_box_3_3,
"",
addSpace=False,
orientation="horizontal",
width=445)
gui.lineEdit(left_box_3_3_3,
self,
"sigma",
label="Roughness: sigma [Å]",
labelWidth=130,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.label(left_box_3_3_3, self, " OR ")
gui.lineEdit(left_box_3_3_3,
self,
"tr",
label="Transition layer tr [Å]",
labelWidth=120,
addSpace=False,
valueType=float,
orientation="horizontal")
self.set_subway()
# -------------------------------------------------------------
left_box_4 = oasysgui.widgetBox(tab_input,
"",
addSpace=False,
orientation="horizontal",
width=470)
left_box_4_1 = oasysgui.widgetBox(left_box_4,
"",
addSpace=False,
orientation="vertical",
width=470)
gui.label(left_box_4_1, self, "Incidence angle limits:")
left_box_4_1_1 = oasysgui.widgetBox(left_box_4_1,
"",
addSpace=False,
orientation="horizontal",
width=470)
gui.lineEdit(left_box_4_1_1,
self,
"scanmin",
label=" From",
labelWidth=70,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.lineEdit(left_box_4_1_1,
self,
"scanmax",
label="To",
labelWidth=15,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.comboBox(left_box_4_1_1,
self,
"unis",
label=" ",
labelWidth=1,
items=["degr.", "min.", "mrad.", "sec.", "urad"],
sendSelectedValue=False,
orientation="horizontal")
gui.lineEdit(left_box_4_1_1,
self,
"nscan",
label="Points",
labelWidth=40,
addSpace=False,
valueType=int,
orientation="horizontal")
# -------------------------------------------------------------
# -------------------------------------------------------------
self.standing_waves_box = oasysgui.widgetBox(tab_input,
"",
addSpace=False,
orientation="vertical",
width=470,
height=140)
self.standing_waves_box_hidden = oasysgui.widgetBox(
tab_input,
"",
addSpace=False,
orientation="horizontal",
width=470,
height=140)
gui.separator(self.standing_waves_box, 10)
standing_waves_box_1 = oasysgui.widgetBox(self.standing_waves_box,
"",
addSpace=False,
orientation="horizontal",
width=120)
gui.checkBox(standing_waves_box_1,
self,
"swflag",
"",
callback=self.set_swflag)
gui.label(standing_waves_box_1, self, "Standing waves:")
self.standing_waves_box_2 = oasysgui.widgetBox(self.standing_waves_box,
"",
addSpace=False,
orientation="vertical",
width=470)
standing_waves_box_2_1 = oasysgui.widgetBox(self.standing_waves_box_2,
"",
addSpace=False,
orientation="horizontal",
width=270)
gui.lineEdit(standing_waves_box_2_1,
self,
"swref",
label="Reference interface",
labelWidth=130,
addSpace=False,
valueType=int,
orientation="horizontal")
gui.label(standing_waves_box_2_1, self, " (0=surface)")
standing_waves_box_2_2 = oasysgui.widgetBox(self.standing_waves_box_2,
"",
addSpace=False,
orientation="horizontal",
width=270)
gui.lineEdit(standing_waves_box_2_2,
self,
"swmin",
label="Start offset",
labelWidth=130,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.label(standing_waves_box_2_2, self, " [Å]", labelWidth=70)
standing_waves_box_2_3 = oasysgui.widgetBox(self.standing_waves_box_2,
"",
addSpace=False,
orientation="horizontal",
width=270)
gui.lineEdit(standing_waves_box_2_3,
self,
"swmax",
label="End offset",
labelWidth=130,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.label(standing_waves_box_2_3, self, " [Å]", labelWidth=70)
standing_waves_box_2_4 = oasysgui.widgetBox(self.standing_waves_box_2,
"",
addSpace=False,
orientation="horizontal",
width=270)
gui.lineEdit(standing_waves_box_2_4,
self,
"swpts",
label="Number of offsets",
labelWidth=130,
addSpace=False,
valueType=float,
orientation="horizontal")
gui.label(standing_waves_box_2_4, self, " (max = 401)")
self.set_swflag()
gui.separator(tab_input)
# -------------------------------------------------------------
box_top = oasysgui.widgetBox(tab_input,
"",
addSpace=False,
orientation="vertical",
width=470)
box_top_0 = oasysgui.widgetBox(box_top,
"",
addSpace=False,
orientation="horizontal",
width=250)
gui.label(box_top_0, self, "Top layer profile (optional):")
button = gui.button(box_top_0,
self,
"? (sintax)",
callback=self.help_profile)
button.setFixedWidth(90)
box_top_1 = oasysgui.widgetBox(box_top,
"",
addSpace=False,
orientation="horizontal",
width=470)
self.profile_area = QtWidgets.QTextEdit()
self.profile_area.setMaximumHeight(240)
self.profile_area.setMaximumWidth(335)
self.profile_area.setLineWrapMode(QtWidgets.QTextEdit.NoWrap)
box_top_1.layout().addWidget(self.profile_area)
gui.separator(box_top_1)
box_top_labels = oasysgui.widgetBox(box_top_1,
"",
addSpace=False,
orientation="vertical",
width=130)
gui.label(box_top_labels, self, "Available Codes:")
crystals_area = QtWidgets.QTextEdit()
crystals_area.setMaximumHeight(295)
crystals_area.setMaximumWidth(130)
crystals_area.setText("\n".join(ListUtility.get_list("crystals")))
crystals_area.setReadOnly(True)
box_top_labels.layout().addWidget(crystals_area)
gui.separator(box_top)
# -----------------------------------------------------------
button = gui.button(tab_input,
self,
"Submit Query!",
callback=self.submit)
button.setFixedHeight(30)
gui.rubber(self.controlArea)
self.tabs = []
self.tabs_widget = oasysgui.tabWidget(self.mainArea)
self.initializeTabs()
self.set_TerSLForm(change_values=False, switch_page=False)
self.profile_area.textChanged.connect(self.set_profile)