def setUp(self):
logger.info('setUp start')
login.loginWeb(self)
self.driver.implicitly_wait(10)
sharing = NetworkSharingPage(self.driver, self.url)
# 打开网络配置-网络共享
sharing.click_netConfig()
time.sleep(0.5)
sharing.click_NetworkSharing()
time.sleep(1)
def setUp(self):
logger.info('setUp start')
login.loginWeb(self)
self.driver.implicitly_wait(10)
ftpSmaba = NetworkSharingPage(self.driver, self.url)
# 打开网络配置-网络共享
ftpSmaba.click_netConfig()
time.sleep(0.5)
ftpSmaba.click_NetworkSharing()
time.sleep(1)
ftpSmaba.click_NetworkSharing2() # 点击网络共享子页面
time.sleep(1)
def setUp(self):
logger.info('setUp start')
login.loginWeb(self)
self.driver.implicitly_wait(10)
account = NetworkSharingPage(self.driver, self.url)
# 打开网络配置-网络共享
account.click_netConfig()
time.sleep(0.5)
account.click_NetworkSharing()
time.sleep(1)
account.click_AccountSettings()
time.sleep(1)
def test_005_WanAcessSmaba(self):
u'''WAN口访问samba服务器(部分型号暂未支持)'''
ftpSmaba = NetworkSharingPage(self.driver, self.url)
#1、验证未打开 ‘wan口访问’ 无法从wan访问samba
#1）验证未打开
WANEnable = str(
self.driver.find_element_by_name('WANEnable').get_attribute(
'checked'))
print(WANEnable)
if WANEnable == 'true':
self.driver.find_element_by_name('WANEnable').click()
ftpSmaba.click_save()
time.sleep(1)
ftpSmaba.click_NetworkSharing2() # 点击网络共享子页面
time.sleep(1)
WANEnable = str(
self.driver.find_element_by_name('WANEnable').get_attribute(
'checked'))
self.assertEqual(WANEnable, 'None', msg='允许wan口访问 关闭失败')
#2）从外网配置页面获取WAN1口地址
wanpage = NetworkConfig_wanpage(self.driver, self.url)
wanpage.click_WANconfig()
time.sleep(1)
# WAN1 ip变量赋值，页面读取
WAN1_ip = str(wanpage.getText_byXpath(wanpage.line1IP))
time.sleep(1)
#3） 更改pc 交换机接口与wan口/上联口通
swconfig.test_LanToWan(self)
# 重新获取地址 应获取到上层网关下发的地址
pcaddr = str(socket.gethostbyname(socket.getfqdn(
socket.gethostname())))
# 调用bat脚本 IP地址释放
os.system('%s' % (batpath + 'ipconfig_release.bat'))
time.sleep(2)
pcaddr1 = str(
socket.gethostbyname(socket.getfqdn(socket.gethostname())))
print(pcaddr1)
if pcaddr1 != str(pcaddr):
print('IP地址已释放')
else:
time.sleep(3)
time.sleep(2)
# 重新获取地址
os.system('%s' % (batpath + 'ipconfig_renew.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if '192.168.' not in str(pcaddr):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
time.sleep(2)
#4）未开启验证无法登录
user_name = "anonymous"
pass_word = ""
my_name = "anyname"
domain_name = ""
remote_smb_IP = WAN1_ip
smb = SMBConnection(user_name,
pass_word,
my_name,
domain_name,
use_ntlm_v2=True)
try:
smb.connect(remote_smb_IP, 139, timeout=3)
except ConnectionRefusedError:
print('未开启samba 无法访问 验证通过')
# 5）改为lan口 并重新获取地址
switchURL2 = gettelnet('switchURL2')
# 调用bat脚本 地址修改为 192.168.34.39 网关192.168.34.1
os.system('%s' % (batpath + 'changeStaticIP3_34duan.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if str(pcaddr) != '192.168.34.39':
time.sleep(2)
n += 1
else:
print('地址已修改为地址 192.168.34.39', n)
break
else:
raise Exception('地址修改为192.168.34.39 失败')
# 更改pc 交换机接口与lan口通
p1 = subprocess.Popen('ping -n 2 -w 2 %s' % switchURL2,
shell=True,
stdout=subprocess.PIPE)
# print('错误IP联网状态(ping通为0 不通为1):', p1.wait()) # ping通为0 不通为1
ping = int(p1.wait())
if ping == 0:
swconfig.test_WanToLan(self)
# 将IP改回自动获取 应获取到被测设备下发的地址
os.system('%s' % (batpath + 'changeDhcpIp.bat'))
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr_new = socket.gethostbyname(
socket.getfqdn(socket.gethostname()))
print(pcaddr_new, n)
if '192.168.' not in str(pcaddr_new):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
time.sleep(3)
#2 验证打开 ‘wan口访问’ 可以从wan口访问smaba
#1）打开
ftpSmaba = NetworkSharingPage(self.driver, self.url)
ftpSmaba.click_NetworkSharing()
time.sleep(1)
ftpSmaba.click_NetworkSharing2() # 点击网络共享子页面
time.sleep(1)
self.driver.find_element_by_name('WANEnable').click()
ftpSmaba.click_save()
time.sleep(1)
WANEnable = self.driver.find_element_by_name(
'WANEnable').get_attribute('checked')
self.assertEqual(WANEnable, 'true', msg='允许wan口访问 启用失败')
#2) 更改pc 交换机接口与wan口/上联口通
swconfig.test_LanToWan(self)
# 重新获取地址 应获取到上层网关下发的地址
pcaddr = str(socket.gethostbyname(socket.getfqdn(
socket.gethostname())))
# 调用bat脚本 IP地址释放
os.system('%s' % (batpath + 'ipconfig_release.bat'))
time.sleep(2)
pcaddr1 = str(
socket.gethostbyname(socket.getfqdn(socket.gethostname())))
print(pcaddr1)
if pcaddr1 != str(pcaddr):
print('IP地址已释放')
else:
time.sleep(3)
time.sleep(2)
# 重新获取地址
os.system('%s' % (batpath + 'ipconfig_renew.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if '192.168.' not in str(pcaddr):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
time.sleep(2)
# 3）samba验证登陆
try:
smb.connect(remote_smb_IP, 139, timeout=3)
except socket.timeout:
raise Exception('samba服务无法访问')
smb.close()
self.driver.quit()
logger.info('test_004_WanaAcess passed')
def test_004_WanAcessFTP(self):
u'''WAN口访问FTP'''
ftpSmaba = NetworkSharingPage(self.driver, self.url)
#1、验证未打开 ‘wan口访问’ 无法从wan访问FTP
#1）验证未打开
WANEnable = str(
self.driver.find_element_by_name('WANEnable').get_attribute(
'checked'))
print(WANEnable)
if WANEnable == 'true':
self.driver.find_element_by_name('WANEnable').click()
ftpSmaba.click_save()
time.sleep(1)
ftpSmaba.click_NetworkSharing2() # 点击网络共享子页面
time.sleep(1)
WANEnable = str(
self.driver.find_element_by_name('WANEnable').get_attribute(
'checked'))
self.assertEqual(WANEnable, 'None', msg='允许wan口访问 关闭失败')
#2）从外网配置页面获取WAN1口地址
wanpage = NetworkConfig_wanpage(self.driver, self.url)
wanpage.click_WANconfig()
time.sleep(1)
# WAN1 ip变量赋值，页面读取
WAN1_ip = str(wanpage.getText_byXpath(wanpage.line1IP))
time.sleep(1)
#3） 更改pc 交换机接口与wan口/上联口通
swconfig.test_LanToWan(self)
# 重新获取地址 应获取到上层网关下发的地址
pcaddr = str(socket.gethostbyname(socket.getfqdn(
socket.gethostname())))
# 调用bat脚本 IP地址释放
os.system('%s' % (batpath + 'ipconfig_release.bat'))
time.sleep(2)
pcaddr1 = str(
socket.gethostbyname(socket.getfqdn(socket.gethostname())))
print(pcaddr1)
if pcaddr1 != str(pcaddr):
print('IP地址已释放')
else:
time.sleep(3)
time.sleep(2)
# 重新获取地址
os.system('%s' % (batpath + 'ipconfig_renew.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if '192.168.' not in str(pcaddr):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
time.sleep(2)
#4）尝试访问FTP
# ftp验证登录
IP = WAN1_ip
Port = 21
ftp = ftplib.FTP()
ftp.encoding = 'utf-8'
try:
ftp.connect(host=IP, port=Port, timeout=5)
ftp.login(user='******') # 相当于没有验证账号密码
except socket.error or socket.gaierror:
print("未开启“WAN口访问开关”无法访问FTP服务 验证通过")
except ftplib.error_perm: # 当前未开启wan口访问，wan口访问时候会弹出账号密码框，但输入会提示密码错误
print("未开启“WAN口访问开关”访问FTP服务会密码错误 验证通过")
else:
raise Exception("未开启“WAN口访问开关” 依旧可以访问FTP服务")
ftp.quit()
#5）改为lan口 并重新获取地址
switchURL2 = gettelnet('switchURL2')
# 调用bat脚本 地址修改为 192.168.34.39 网关192.168.34.1
os.system('%s' % (batpath + 'changeStaticIP3_34duan.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if str(pcaddr) != '192.168.34.39':
time.sleep(2)
n += 1
else:
print('地址已修改为地址 192.168.34.39', n)
break
else:
raise Exception('地址修改为192.168.34.39 失败')
# 更改pc 交换机接口与lan口通
p = pingTestIP(switchURL2)
if p == 'Y':
swconfig.test_WanToLan(self)
# 将IP改回自动获取 应获取到被测设备下发的地址
os.system('%s' % (batpath + 'changeDhcpIp.bat'))
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr_new = socket.gethostbyname(
socket.getfqdn(socket.gethostname()))
print(pcaddr_new, n)
if '192.168.' not in str(pcaddr_new):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
time.sleep(3)
#2 验证打开 ‘wan口访问’ 可以从wan口访问FTP
#1）打开
ftpSmaba = NetworkSharingPage(self.driver, self.url)
ftpSmaba.click_NetworkSharing()
time.sleep(1)
ftpSmaba.click_NetworkSharing2() # 点击网络共享子页面
time.sleep(1)
self.driver.find_element_by_name('WANEnable').click()
ftpSmaba.click_save()
time.sleep(2)
WANEnable = self.driver.find_element_by_name(
'WANEnable').get_attribute('checked')
self.assertEqual(WANEnable, 'true', msg='允许wan口访问 启用失败')
#2) 更改pc 交换机接口与wan口/上联口通
swconfig.test_LanToWan(self)
# 重新获取地址 应获取到上层网关下发的地址
pcaddr = str(socket.gethostbyname(socket.getfqdn(
socket.gethostname())))
# 调用bat脚本 IP地址释放
os.system('%s' % (batpath + 'ipconfig_release.bat'))
time.sleep(2)
pcaddr1 = str(
socket.gethostbyname(socket.getfqdn(socket.gethostname())))
print(pcaddr1)
if pcaddr1 != str(pcaddr):
print('IP地址已释放')
else:
time.sleep(3)
time.sleep(2)
# 重新获取地址
os.system('%s' % (batpath + 'ipconfig_renew.bat'))
time.sleep(5)
n = 0
while n < 30:
# 获取本机ip 默认有线地址，有线断开会显示无线
pcaddr = socket.gethostbyname(socket.getfqdn(socket.gethostname()))
print(pcaddr, n)
if '192.168.' not in str(pcaddr):
time.sleep(2)
n += 1
else:
print('IP地址已自动获取成功', n)
break
else:
raise Exception('未获取到地址')
time.sleep(2)
# 3）ftp验证登陆
try:
ftp.connect(host=IP, port=Port, timeout=5)
except socket.error or socket.gaierror:
raise Exception("无法访问FTP服务")
try:
ftp.login(user='******') # 相当于没有验证账号密码
except ftplib.error_perm:
raise Exception("FTP账号密码验证错误")
ftpFile = ftp.nlst('1') # 获取指定目录下的文件
print('ftpFile', ftpFile)
ftp.quit()
self.driver.quit()
logger.info('test_004_WanaAcess passed')