def setUp(self):
self.test_shape = paramak.CenterColumnShieldFlatTopCircular(
height=600,
arc_height=400,
inner_radius=100,
mid_radius=150,
outer_radius=200)
def test_CenterColumnShieldFlatTopCircular_creation(self):
"""creates a CenterColumnShieldFlatTopCircular object and checks a solid is created"""
test_shape = paramak.CenterColumnShieldFlatTopCircular(
height=600, arc_height=200, inner_radius=100, mid_radius=150, outer_radius=200
)
assert test_shape.solid is not None
assert test_shape.volume > 1000
def test_construction_with_CenterColumnShieldFlatTopCircular(self):
"""Makes a firstwall with from a CenterColumnShieldFlatTopCircular and
checks the volume is smaller than the shield"""
a = paramak.CenterColumnShieldFlatTopCircular(height=500,
arc_height=300,
inner_radius=30,
mid_radius=70,
outer_radius=120)
b = paramak.InboardFirstwallFCCS(central_column_shield=a,
thickness=20,
rotation_angle=180)
assert a.solid is not None
assert b.solid is not None
assert a.volume > b.volume
def test_CenterColumnShieldFlatTopCircular_creation(self):
"""creates a center column shield using the
CenterColumnShieldFlatTopCircular parametric
component and checks that a cadquery solid is created"""
test_shape = paramak.CenterColumnShieldFlatTopCircular(
height=600,
arc_height=200,
inner_radius=100,
mid_radius=150,
outer_radius=200,
)
assert test_shape.solid is not None
assert test_shape.volume > 1000
def test_boolean_union(self):
"""Makes two halfs of a 360 firstwall and perform a union and checks
that the volume corresponds to 2 times the volume of 1 half"""
a = paramak.CenterColumnShieldFlatTopCircular(height=500,
arc_height=300,
inner_radius=30,
mid_radius=70,
outer_radius=120)
b = paramak.InboardFirstwallFCCS(central_column_shield=a,
thickness=20,
rotation_angle=180,
azimuth_placement_angle=0)
c = paramak.InboardFirstwallFCCS(central_column_shield=a,
thickness=20,
rotation_angle=180,
azimuth_placement_angle=180,
union=b)
assert np.isclose(c.volume, 2 * b.volume)
def test_azimuth_placement_angle(self):
"""Makes two 180deg firstwalls (one is rotated 90deg), performs a cut
and checks that the volume corresponds to 0.5 times the volume of 1
half"""
a = paramak.CenterColumnShieldFlatTopCircular(height=500,
arc_height=300,
inner_radius=30,
mid_radius=70,
outer_radius=120)
b = paramak.InboardFirstwallFCCS(central_column_shield=a,
thickness=20,
rotation_angle=180,
azimuth_placement_angle=0)
c = paramak.InboardFirstwallFCCS(central_column_shield=a,
thickness=20,
rotation_angle=180,
azimuth_placement_angle=90,
cut=b)
assert np.isclose(c.volume, 0.5 * b.volume)
def main():
rot_angle = 180
all_components = []
plasma = paramak.Plasma(
# default parameters
rotation_angle=rot_angle,
stp_filename="plasma_shape.stp",
)
all_components.append(plasma)
component = paramak.BlanketFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=rot_angle,
stp_filename="blanket_constant_thickness_outboard_plasma.stp",
)
all_components.append(component)
component = paramak.BlanketCutterStar(height=2000,
width=2000,
distance=100)
all_components.append(component)
component = paramak.BlanketFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=250,
offset_from_plasma=30,
rotation_angle=rot_angle,
stp_filename="blanket_constant_thickness_inboard_plasma.stp",
)
all_components.append(component)
component = paramak.BlanketFP(
plasma=plasma,
thickness=100,
stop_angle=250,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=rot_angle,
stp_filename="blanket_constant_thickness_plasma.stp",
)
all_components.append(component)
CenterColumnShieldCylinder = paramak.CenterColumnShieldCylinder(
inner_radius=80,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_cylinder.stp",
)
all_components.append(CenterColumnShieldCylinder)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldCylinder,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_cylinder.stp",
)
all_components.append(component)
CenterColumnShieldHyperbola = paramak.CenterColumnShieldHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_hyperbola.stp",
)
all_components.append(CenterColumnShieldHyperbola)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldHyperbola,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_hyperbola.stp",
)
all_components.append(component)
CenterColumnShieldCircular = paramak.CenterColumnShieldCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_circular.stp",
)
all_components.append(CenterColumnShieldCircular)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldCircular,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_circular.stp",
)
all_components.append(component)
CenterColumnShieldFlatTopHyperbola = paramak.CenterColumnShieldFlatTopHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_flat_top_hyperbola.stp",
)
all_components.append(CenterColumnShieldFlatTopHyperbola)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldFlatTopHyperbola,
thickness=50,
rotation_angle=rot_angle,
stp_filename=
"firstwall_from_center_column_shield_flat_top_hyperbola.stp",
)
all_components.append(component)
CenterColumnShieldFlatTopCircular = paramak.CenterColumnShieldFlatTopCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename="center_column_shield_flat_top_Circular.stp",
)
all_components.append(CenterColumnShieldFlatTopCircular)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldFlatTopCircular,
thickness=50,
rotation_angle=rot_angle,
stp_filename=
"firstwall_from_center_column_shield_flat_top_Circular.stp",
)
all_components.append(component)
CenterColumnShieldPlasmaHyperbola = paramak.CenterColumnShieldPlasmaHyperbola(
inner_radius=150,
mid_offset=50,
edge_offset=40,
height=800,
rotation_angle=rot_angle,
stp_filename="center_column_shield_plasma_hyperbola.stp",
)
all_components.append(CenterColumnShieldPlasmaHyperbola)
component = paramak.InboardFirstwallFCCS(
central_column_shield=CenterColumnShieldPlasmaHyperbola,
thickness=50,
rotation_angle=rot_angle,
stp_filename="firstwall_from_center_column_shield_plasma_hyperbola.stp",
)
all_components.append(component)
component = paramak.InnerTfCoilsCircular(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename="inner_tf_coils_circular.stp",
)
all_components.append(component)
component = paramak.InnerTfCoilsFlat(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename="inner_tf_coils_flat.stp",
)
all_components.append(component)
# this makes 4 pf coil cases
pf_coil_set = paramak.PoloidalFieldCoilCaseSet(
heights=[10, 10, 20, 20],
widths=[10, 10, 20, 40],
casing_thicknesses=[5, 5, 10, 10],
center_points=[(100, 100), (100, 150), (50, 200), (50, 50)],
rotation_angle=rot_angle,
stp_filename="pf_coil_case_set.stp")
all_components.append(pf_coil_set)
# this makes 4 pf coils
pf_coil_set = paramak.PoloidalFieldCoilSet(heights=[10, 10, 20, 20],
widths=[10, 10, 20, 40],
center_points=[(100, 100),
(100, 150),
(50, 200),
(50, 50)],
rotation_angle=rot_angle,
stp_filename="pf_coil_set.stp")
all_components.append(pf_coil_set)
# this makes 4 pf coil cases for the 4 pf coils made above
component = paramak.PoloidalFieldCoilCaseSetFC(
pf_coils=pf_coil_set,
casing_thicknesses=[5, 5, 10, 10],
rotation_angle=rot_angle,
stp_filename="pf_coil_cases_set.stp")
all_components.append(component)
# this makes 1 pf coils
pf_coil = paramak.PoloidalFieldCoil(center_point=(100, 100),
height=20,
width=20,
rotation_angle=rot_angle,
stp_filename="poloidal_field_coil.stp")
all_components.append(pf_coil)
# this makes one PF coil case for the provided pf coil
component = paramak.PoloidalFieldCoilCaseSetFC(
pf_coils=[pf_coil],
casing_thicknesses=[10],
rotation_angle=rot_angle,
stp_filename="pf_coil_cases_set_fc.stp")
all_components.append(component)
component = paramak.PoloidalFieldCoilCaseFC(
pf_coil=pf_coil,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename="poloidal_field_coil_case_fc.stp",
)
all_components.append(component)
component = paramak.PoloidalFieldCoilCase(
center_point=(100, 100),
coil_height=20,
coil_width=20,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename="poloidal_field_coil_case.stp",
)
all_components.append(component)
component = paramak.BlanketConstantThicknessArcV(
inner_lower_point=(300, -200),
inner_mid_point=(500, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename="blanket_arc_v.stp",
)
all_components.append(component)
component = paramak.BlanketConstantThicknessArcH(
inner_lower_point=(300, -200),
inner_mid_point=(400, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename="blanket_arc_h.stp",
)
all_components.append(component)
component = paramak.ToroidalFieldCoilRectangle(
horizontal_start_point=(100, 700),
vertical_mid_point=(800, 0),
thickness=150,
distance=60,
stp_filename="tf_coil_rectangle.stp",
number_of_coils=1,
)
all_components.append(component)
component = paramak.ToroidalFieldCoilCoatHanger(
horizontal_start_point=(200, 500),
horizontal_length=400,
vertical_mid_point=(700, 50),
vertical_length=500,
thickness=50,
distance=50,
stp_filename="toroidal_field_coil_coat_hanger.stp",
number_of_coils=1,
)
all_components.append(component)
component = paramak.ToroidalFieldCoilTripleArc(
R1=80,
h=200,
radii=(70, 100),
coverages=(60, 60),
thickness=30,
distance=30,
number_of_coils=1,
stp_filename="toroidal_field_coil_triple_arc.stp")
all_components.append(component)
magnet = paramak.ToroidalFieldCoilPrincetonD(
R1=80,
R2=300,
thickness=30,
distance=30,
number_of_coils=1,
stp_filename="toroidal_field_coil_princeton_d.stp")
all_components.append(magnet)
component = paramak.ITERtypeDivertor(
# default parameters
rotation_angle=rot_angle,
stp_filename="ITER_type_divertor.stp",
)
all_components.append(component)
component = paramak.PortCutterRotated(center_point=(450, 0),
polar_coverage_angle=20,
rotation_angle=10,
polar_placement_angle=45,
azimuth_placement_angle=0)
all_components.append(component)
component = paramak.PortCutterRectangular(
distance=3,
z_pos=0,
height=0.2,
width=0.4,
fillet_radius=0.02,
azimuth_placement_angle=[0, 45, 90, 180])
all_components.append(component)
component = paramak.PortCutterCircular(
distance=3,
z_pos=0.25,
radius=0.1,
# azimuth_placement_angle=[0, 45, 90, 180], # TODO: fix issue #548
azimuth_placement_angle=[0, 45, 90],
)
all_components.append(component)
component = paramak.VacuumVessel(height=2,
inner_radius=1,
thickness=0.2,
rotation_angle=270)
all_components.append(component)
component = paramak.CoolantChannelRingStraight(
height=200,
channel_radius=10,
ring_radius=70,
number_of_coolant_channels=8,
workplane="XY",
rotation_axis="Z",
stp_filename="coolant_channel_ring_straight.stp",
)
all_components.append(component)
component = paramak.CoolantChannelRingCurved(
height=200,
channel_radius=10,
ring_radius=70,
mid_offset=-20,
number_of_coolant_channels=8,
workplane="XY",
path_workplane="XZ",
stp_filename="coolant_channel_ring_curved.stp",
force_cross_section=True)
all_components.append(component)
component = paramak.RotatedIsoscelesTriangle(
height=20,
base_length=15,
pivot_angle=0,
pivot_point=(100, 50),
rotation_angle=70,
workplane='XY',
stp_filename='rotated_isosceles_triangle.stp')
all_components.append(component)
component = paramak.RotatedTrapezoid(length_1=10,
length_2=20,
length_3=30,
pivot_angle=0,
pivot_point=(100, 50),
rotation_angle=45,
stp_filename='rotated_trapezoid.stp')
all_components.append(component)
component = paramak.PoloidalSegments(number_of_segments=5,
center_point=(400, 50))
all_components.append(component)
component = paramak.TFCoilCasing(magnet=magnet,
inner_offset=10,
outer_offset=15,
vertical_section_offset=20,
distance=40)
all_components.append(component)
component = paramak.HexagonPin(length_of_side=5,
distance=10,
center_point=(10, 20))
all_components.append(component)
return all_components
def main():
rot_angle = 180
all_components = []
plasma = paramak.Plasma(
# default parameters
rotation_angle=rot_angle,
stp_filename='plasma_shape.stp')
all_components.append(plasma)
component = paramak.BlanketConstantThicknessFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=180,
stp_filename='blanket_constant_thickness_outboard_plasma.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessFP(
plasma=plasma,
thickness=100,
stop_angle=90,
start_angle=250,
offset_from_plasma=30,
rotation_angle=180,
stp_filename='blanket_constant_thickness_inboard_plasma.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessFP(
plasma=plasma,
thickness=100,
stop_angle=250,
start_angle=-90,
offset_from_plasma=30,
rotation_angle=180,
stp_filename='blanket_constant_thickness_plasma.stp')
all_components.append(component)
component = paramak.ToroidalFieldCoilCoatHanger(
horizontal_start_point=(200, 500),
horizontal_length=400,
vertical_start_point=(700, 50),
vertical_length=500,
thickness=50,
distance=50,
stp_filename='toroidal_field_coil_coat_hanger.stp',
number_of_coils=5)
all_components.append(component)
component = paramak.CenterColumnShieldCylinder(
inner_radius=80,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_cylinder.stp')
all_components.append(component)
component = paramak.CenterColumnShieldHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_hyperbola.stp')
all_components.append(component)
component = paramak.CenterColumnShieldCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_circular.stp')
all_components.append(component)
component = paramak.CenterColumnShieldFlatTopHyperbola(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_flat_top_hyperbola.stp')
all_components.append(component)
component = paramak.CenterColumnShieldFlatTopCircular(
inner_radius=50,
mid_radius=75,
outer_radius=100,
arc_height=220,
height=300,
rotation_angle=rot_angle,
stp_filename='center_column_shield_flat_top_Circular.stp')
all_components.append(component)
component = paramak.CenterColumnShieldPlasmaHyperbola(
inner_radius=150,
mid_offset=50,
edge_offset=40,
height=800,
rotation_angle=rot_angle,
stp_filename='center_column_shield_plasma_hyperbola.stp')
all_components.append(component)
#
# component = paramak.DivertorBlock(
# major_radius = 800,
# minor_radius = 400,
# triangularity = 1.2,
# elongation = 0.9,
# thickness = 50,
# offset_from_plasma = 20,
# start
# )
component = paramak.InnerTfCoilsCircular(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename='inner_tf_coils_circular.stp')
all_components.append(component)
component = paramak.InnerTfCoilsFlat(
inner_radius=25,
outer_radius=100,
number_of_coils=10,
gap_size=5,
height=300,
stp_filename='inner_tf_coils_flat.stp')
all_components.append(component)
pf_coil = paramak.PoloidalFieldCoil(center_point=(100, 100),
height=20,
width=20,
rotation_angle=rot_angle,
stp_filename='poloidal_field_coil.stp')
all_components.append(pf_coil)
component = paramak.PoloidalFieldCoilCaseFC(
pf_coil=pf_coil,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename='poloidal_field_coil_case_fc.stp')
all_components.append(component)
component = paramak.PoloidalFieldCoilCase(
center_point=(100, 100),
coil_height=20,
coil_width=20,
casing_thickness=10,
rotation_angle=rot_angle,
stp_filename='poloidal_field_coil_case.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessArcV(
inner_lower_point=(300, -200),
inner_mid_point=(500, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename='blanket_arc_v.stp')
all_components.append(component)
component = paramak.BlanketConstantThicknessArcH(
inner_lower_point=(300, -200),
inner_mid_point=(400, 0),
inner_upper_point=(300, 200),
thickness=100,
rotation_angle=rot_angle,
stp_filename='blanket_arc_h.stp')
all_components.append(component)
component = paramak.ToroidalFieldCoilRectangle(
inner_upper_point=(100, 700),
inner_mid_point=(800, 0),
inner_lower_point=(100, -700),
thickness=150,
distance=60,
stp_filename='tf_coil_rectangle.stp',
number_of_coils=6)
all_components.append(component)
component = paramak.ITERtypeDivertor(
# default parameters
rotation_angle=rot_angle,
stp_filename='ITER_type_divertor.stp')
all_components.append(component)
return all_components
