def save_selection(self):
sfile = open(part_schem, 'w')
sfile.writelines('partscheme=%s' % self.schm)
sfile.close()
file_disk = open(disk_file, 'w')
file_disk.writelines('%s\n' % self.disk)
file_disk.close()
NUMBER = int(self.size) - 1
slice_file = open(dslice, 'w')
slice_file.writelines('all\n')
#slice_file.writelines('%s\n' % NUMBER)
slice_file.close()
ram = Popen(memory, shell=True, stdin=PIPE, stdout=PIPE, stderr=STDOUT,
close_fds=True)
mem = ram.stdout.read()
SWAP = int(mem.partition(':')[2].strip()) / (1024 * 1024)
NUM1 = NUMBER - SWAP
read = open(boot_file, 'r')
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
NUM1 = NUM1 - 100
elif boot == 'GRUB':
NUM1 = NUM1 - 1
else:
NUM1 = NUM1 - 1
pfile = open(Part_label, 'w')
pfile.writelines('UFS+SUJ %s /\n' % NUM1)
pfile.writelines('SWAP 0 none\n')
pfile.close()
return
def save_selection(self):
sfile = open(part_schem, 'w')
sfile.writelines('partscheme=%s' % self.schm)
sfile.close()
file_disk = open(disk_file, 'w')
file_disk.writelines('%s\n' % self.disk)
file_disk.close()
NUMBER = int(self.size) - 1
slice_file = open(dslice, 'w')
slice_file.writelines('all\n')
#slice_file.writelines('%s\n' % NUMBER)
slice_file.close()
ram = Popen(memory,
shell=True,
stdin=PIPE,
stdout=PIPE,
stderr=STDOUT,
close_fds=True)
mem = ram.stdout.read()
SWAP = int(mem.partition(':')[2].strip()) / (1024 * 1024)
NUM1 = NUMBER - SWAP
read = open(boot_file, 'r')
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
NUM1 = NUM1 - 100
elif boot == 'GRUB':
NUM1 = NUM1 - 1
else:
NUM1 = NUM1 - 1
pfile = open(Part_label, 'w')
pfile.writelines('UFS+SUJ %s /\n' % NUM1)
pfile.writelines('SWAP 0 none\n')
pfile.close()
return
def save_selection(self):
SIZE = int(zfs_dsk_list[0].partition('-')[2].rstrip()) - 2
SWAP = int(self.swap_entry.get_text())
ZFS_NUM = SIZE - SWAP
if self.disk_encript is True:
dgeli = '.eli'
else:
dgeli = ''
pfile = open(Part_label, 'w')
if self.zpool is True:
pfile.writelines("zpoolName=%s\n" % self.pool.get_text())
else:
pfile.writelines("#zpoolName=None\n")
if self.zfs_four_k is True:
pfile.writelines('zfsForce4k=YES\n\n')
else:
pfile.writelines('#zfsForce4k=No\n\n')
pfile.writelines('disk0=%s\n' %
zfs_dsk_list[0].partition('-')[0].rstrip())
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
if self.poolType == 'none':
pool_disk = '\n'
else:
ZFS_disk = zfs_dsk_list
disk_len = len(ZFS_disk) - 1
num = 1
mirror_dsk = ''
while disk_len != 0:
mirror_dsk += ' ' + ZFS_disk[num].partition('-')[0].rstrip()
print(mirror_dsk)
num += 1
disk_len -= 1
pool_disk = ' (%s:%s)\n' % (self.poolType, mirror_dsk)
if bios_or_uefi() == "UEFI":
ZFS_NUM = ZFS_NUM - 100
else:
ZFS_NUM = ZFS_NUM - 1
zfslayout = "/(compress=lz4|atime=off),/root(compress=lz4)," \
"/tmp(compress=lz4),/usr(canmount=off|mountpoint=none)," \
"/usr/home(compress=lz4),/usr/jails(compress=lz4)," \
"/usr/obj(compress=lz4),/usr/ports(compress=lz4)," \
"/usr/src(compress=lz4)," \
"/var(canmount=off|atime=on|mountpoint=none)," \
"/var/audit(compress=lz4),/var/log(compress=lz4)," \
"/var/mail(compress=lz4),/var/tmp(compress=lz4)"
zfsPart = 'disk0-part=ZFS%s %s %s%s' % (dgeli, ZFS_NUM, zfslayout,
pool_disk)
pfile.writelines(zfsPart)
if SWAP != 0:
pfile.writelines('disk0-part=SWAP%s %s none\n' % ('', SWAP))
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def save_selection(self):
SIZE = int(zfs_dsk_list[0].partition('-')[2].rstrip()) - 2
SWAP = int(self.swap_entry.get_text())
ZFS_NUM = SIZE - SWAP
if self.disk_encript is True:
dgeli = '.eli'
else:
dgeli = ''
pfile = open(Part_label, 'w')
if self.zpool is True:
pfile.writelines("zpoolName=%s\n" % self.pool.get_text())
else:
pfile.writelines("#zpoolName=None\n")
if self.zfs_four_k is True:
pfile.writelines('zfsForce4k=YES\n\n')
else:
pfile.writelines('#zfsForce4k=No\n\n')
pfile.writelines('disk0=%s\n' % zfs_dsk_list[0].partition('-')[0].rstrip())
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
if self.poolType == 'none':
pool_disk = '\n'
else:
ZFS_disk = zfs_dsk_list
disk_len = len(ZFS_disk) - 1
num = 1
mirror_dsk = ''
while disk_len != 0:
mirror_dsk += ' ' + ZFS_disk[num].partition('-')[0].rstrip()
print(mirror_dsk)
num += 1
disk_len -= 1
pool_disk = ' (%s:%s)\n' % (self.poolType, mirror_dsk)
if bios_or_uefi() == "UEFI":
ZFS_NUM = ZFS_NUM - 100
else:
ZFS_NUM = ZFS_NUM - 1
zfslayout = "/(compress=lz4|atime=off),/root(compress=lz4)," \
"/tmp(compress=lz4),/usr(canmount=off|mountpoint=none)," \
"/usr/home(compress=lz4),/usr/jails(compress=lz4)," \
"/usr/obj(compress=lz4),/usr/ports(compress=lz4)," \
"/usr/src(compress=lz4)," \
"/var(canmount=off|atime=on|mountpoint=none)," \
"/var/audit(compress=lz4),/var/log(compress=lz4)," \
"/var/mail(compress=lz4),/var/tmp(compress=lz4)"
zfsPart = 'disk0-part=ZFS%s %s %s%s' % (dgeli, ZFS_NUM, zfslayout,
pool_disk)
pfile.writelines(zfsPart)
if SWAP != 0:
pfile.writelines('disk0-part=SWAP%s %s none\n' % ('', SWAP))
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def save_selection(self):
SIZE = int(zfs_dsk_list[0].partition('-')[2].rstrip()) - 2
SWAP = int(self.swap_entry.get_text())
ZFS_NUM = SIZE - SWAP
if self.disk_encript is True:
dgeli = '.eli '
else:
dgeli = ' '
if self.swap_encrypt is True:
sgeli = '.eli '
else:
sgeli = ' '
pfile = open(Part_label, 'w')
if self.zpool is True:
pfile.writelines("zpoolName=%s\n" % self.pool.get_text())
else:
pfile.writelines("#zpoolName=None\n")
if self.zfs_four_k is True:
pfile.writelines('zfsForce4k=YES\n\n')
else:
pfile.writelines('#zfsForce4k=No\n\n')
pfile.writelines('disk0=%s\n' %
zfs_dsk_list[0].partition('-')[0].rstrip())
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
if self.mirror == 'none':
pool_type = '\n'
else:
ZFS_disk = zfs_dsk_list
disk_len = len(ZFS_disk) - 1
num = 1
while disk_len != 0:
mirror_dsk = ' ' + ZFS_disk[num].partition('-')[0].rstrip()
num += 1
disk_len -= 1
pool_type = ' (%s:%s)\n' % (self.mirror, mirror_dsk)
read = open(boot_file, 'r')
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
ZFS_NUM = ZFS_NUM - 100
elif boot == 'GRUB':
ZFS_NUM = ZFS_NUM - 1
else:
ZFS_NUM = ZFS_NUM - 1
pfile.writelines('disk0-part=ZFS%s%s /, /usr, /var%s' %
(dgeli, ZFS_NUM, pool_type))
if SWAP != 0:
pfile.writelines('disk0-part=SWAP%s%s none\n' % (sgeli, SWAP))
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def save_selection(self):
SIZE = int(zfs_dsk_list[0].partition('-')[2].rstrip()) - 2
SWAP = int(self.swap_entry.get_text())
ZFS_NUM = SIZE - SWAP
if self.disk_encript is True:
dgeli = '.eli '
else:
dgeli = ' '
if self.swap_encrypt is True:
sgeli = '.eli '
else:
sgeli = ' '
pfile = open(Part_label, 'w')
if self.zpool is True:
pfile.writelines("zpoolName=%s\n" % self.pool.get_text())
else:
pfile.writelines("#zpoolName=None\n")
if self.zfs_four_k is True:
pfile.writelines('zfsForce4k=YES\n\n')
else:
pfile.writelines('#zfsForce4k=No\n\n')
pfile.writelines('disk0=%s\n' % zfs_dsk_list[0].partition('-')[0].rstrip())
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
if self.mirror == 'none':
pool_type = '\n'
else:
ZFS_disk = zfs_dsk_list
disk_len = len(ZFS_disk) - 1
num = 1
while disk_len != 0:
mirror_dsk = ' ' + ZFS_disk[num].partition('-')[0].rstrip()
num += 1
disk_len -= 1
pool_type = ' (%s:%s)\n' % (self.mirror, mirror_dsk)
read = open(boot_file, 'r')
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
ZFS_NUM = ZFS_NUM - 100
elif boot == 'GRUB':
ZFS_NUM = ZFS_NUM - 1
else:
ZFS_NUM = ZFS_NUM - 1
pfile.writelines('disk0-part=ZFS%s%s /, /usr, /var%s' % (dgeli, ZFS_NUM, pool_type))
if SWAP != 0:
pfile.writelines('disk0-part=SWAP%s%s none\n' % (sgeli, SWAP))
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def save_selection(self):
disk_size = int(ufs_dsk_list[0].partition('-')[2].rstrip()) - 2
swap_size = int(self.swap_entry.get_text())
root_size = disk_size - swap_size
if self.disk_encript is True:
dgeli = '.eli'
else:
dgeli = ''
pfile = open(Part_label, 'w')
pfile.writelines('disk0=%s\n' %
ufs_dsk_list[0].partition('-')[0].rstrip())
if self.mirror is True:
ufs_disk = ufs_dsk_list
disk_len = len(ufs_disk) - 1
num = 1
mirror_dsk = ''
while disk_len != 0:
mirror_dsk += ufs_disk[num].partition('-')[0].rstrip() + " "
print mirror_dsk
num += 1
disk_len -= 1
pfile.writelines("mirror=%s\n" % mirror_dsk)
pfile.writelines("mirrorlab=%s\n" % self.mirrorbl)
else:
pfile.writelines("#mirror=\n")
pfile.writelines("#mirrorlab=\n")
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
read = open(boot_file, 'r')
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
root_size = root_size - 100
elif boot == 'GRUB':
root_size = root_size - 1
else:
root_size = root_size - 1
zfsPart = 'disk0-part=%s%s %s /\n' % (self.fs, dgeli, root_size)
pfile.writelines(zfsPart)
if swap_size != 0:
pfile.writelines('disk0-part=SWAP%s %s none\n' %
(dgeli, swap_size))
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def save_selection(self):
disk_size = int(zfs_dsk_list[0].partition('-')[2].rstrip()) - 2
swap_size = int(self.swap_entry.get_text())
root_size = disk_size - swap_size
if self.disk_encript is True:
dgeli = '.eli'
else:
dgeli = ''
pfile = open(Part_label, 'w')
pfile.writelines('disk0=%s\n' % zfs_dsk_list[0].partition('-')[0].rstrip())
if self.mirror is True:
ufs_disk = zfs_dsk_list
disk_len = len(ufs_disk) - 1
num = 1
mirror_dsk = ''
while disk_len != 0:
mirror_dsk += ufs_disk[num].partition('-')[0].rstrip() + " "
print mirror_dsk
num += 1
disk_len -= 1
pfile.writelines("mirror=%s\n" % mirror_dsk)
pfile.writelines("mirrorlab=%s\n" % self.mirrorbl)
else:
pfile.writelines("#mirror=\n")
pfile.writelines("#mirrorlab=\n")
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
read = open(boot_file, 'r')
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
root_size = root_size - 100
elif boot == 'GRUB':
root_size = root_size - 1
else:
root_size = root_size - 1
zfsPart = 'disk0-part=%s%s %s /\n' % (self.fs, dgeli, root_size)
pfile.writelines(zfsPart)
if swap_size != 0:
pfile.writelines('disk0-part=SWAP%s %s none\n' % (dgeli, swap_size))
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def save_selection(self):
disk_size = int(ufs_dsk_list[0].partition('-')[2].rstrip()) - 512
swap_size = int(self.swap_entry.get_text())
root_size = disk_size - swap_size
if self.disk_encript is True:
dgeli = '.eli'
else:
dgeli = ''
pfile = open(Part_label, 'w')
pfile.writelines('disk0=%s\n' %
ufs_dsk_list[0].partition('-')[0].rstrip())
if self.mirror is True:
ufs_disk = ufs_dsk_list
disk_len = len(ufs_disk) - 1
num = 1
mirror_dsk = ''
while disk_len != 0:
mirror_dsk += ufs_disk[num].partition('-')[0].rstrip() + " "
print(mirror_dsk)
num += 1
disk_len -= 1
pfile.writelines("mirror=%s\n" % mirror_dsk)
pfile.writelines("mirrorlab=%s\n" % self.mirrorbl)
else:
pfile.writelines("#mirror=\n")
pfile.writelines("#mirrorlab=\n")
pfile.writelines('partition=ALL\n')
pfile.writelines('partscheme=%s\n' % self.scheme)
pfile.writelines('commitDiskPart\n\n')
if bios_or_uefi() == "UEFI":
root_size = root_size - 100
else:
root_size = root_size - 1
# adding zero to use remaining space
zfsPart = f'disk0-part={self.fs}{dgeli} {root_size} /\n'
pfile.writelines(zfsPart)
if swap_size != 0:
pfile.writelines('disk0-part=SWAP 0 none\n')
if self.disk_encript is True:
pfile.writelines('encpass=%s\n' % self.password.get_text())
else:
pfile.writelines('#encpass=None\n')
pfile.writelines('commitDiskLabel\n')
pfile.close()
def labelEditor(self, path, pslice, size, scheme, modify):
numb = int(size)
self.window = Gtk.Window()
self.window.set_title("Add Partition")
self.window.set_border_width(0)
self.window.set_size_request(480, 200)
self.window.set_icon_from_file(logo)
box1 = Gtk.VBox(False, 0)
self.window.add(box1)
box1.show()
box2 = Gtk.VBox(False, 10)
box2.set_border_width(10)
box1.pack_start(box2, True, True, 0)
box2.show()
# create label
# label0 = Gtk.Label("Create Partition Label")
table = Gtk.Table(1, 2, True)
label1 = Gtk.Label("Type:")
label2 = Gtk.Label("Size(MB):")
label3 = Gtk.Label("Mount point:")
self.fstype = Gtk.ComboBoxText()
self.fstype.append_text('UFS')
self.fstype.append_text('UFS+S')
self.fstype.append_text('UFS+J')
self.fstype.append_text('UFS+SUJ')
self.fstype.append_text('SWAP')
if scheme == 'GPT':
if bios_or_uefi() == "UEFI":
self.fstype.append_text("UEFI")
self.fs = "UEFI"
else:
self.fstype.append_text("BOOT")
self.fs = "BOOT"
if self.fs == "UEFI" and efi_exist(self.disk) is False:
if not os.path.exists(Part_label):
self.fstype.set_active(5)
elif len(self.prttn) == 0:
self.fstype.set_active(5)
elif self.fs == "BOOT":
if not os.path.exists(Part_label):
self.fstype.set_active(5)
elif len(self.prttn) == 0:
self.fstype.set_active(5)
elif self.lablebehind == "/":
self.fstype.set_active(4)
self.fs = "SWAP"
else:
self.fstype.set_active(3)
self.fs = "UFS+SUJ"
self.fstype.connect("changed", self.on_fs)
adj = Gtk.Adjustment(numb, 0, numb, 1, 100, 0)
self.entry = Gtk.SpinButton(adjustment=adj)
if modify is True:
self.entry.set_editable(False)
else:
self.entry.set_editable(True)
self.mountpoint = Gtk.ComboBoxText()
# self.mountpoint.append_text('select labels')
self.label = "none"
self.mountpoint.append_text('none')
# The space for root '/ ' is to recognise / from the file.
self.mountpoint.append_text('/')
if os.path.exists(Part_label):
if scheme == 'GPT' and len(self.prttn) == 1:
self.mountpoint.append_text('/boot')
elif scheme == 'MBR' and len(self.prttn) == 0:
self.mountpoint.append_text('/boot')
elif scheme == 'MBR' and not os.path.exists(Part_label):
self.mountpoint.append_text('/boot')
self.mountpoint.append_text('/etc')
self.mountpoint.append_text('/root')
self.mountpoint.append_text('/tmp')
self.mountpoint.append_text('/usr')
self.mountpoint.append_text('/usr/home')
self.mountpoint.append_text('/var')
self.mountpoint.set_active(0)
self.mountpoint.connect("changed", self.on_label)
# table.attach(label0, 0, 2, 0, 1)
table.attach(label1, 0, 1, 1, 2)
table.attach(self.fstype, 1, 2, 1, 2)
table.attach(label2, 0, 1, 2, 3)
table.attach(self.entry, 1, 2, 2, 3)
table.attach(label3, 0, 1, 3, 4)
table.attach(self.mountpoint, 1, 2, 3, 4)
box2.pack_start(table, False, False, 0)
box2 = Gtk.HBox(False, 10)
box2.set_border_width(5)
box1.pack_start(box2, False, True, 0)
box2.show()
# Add button
bbox = Gtk.HButtonBox()
bbox.set_border_width(5)
bbox.set_spacing(10)
button = Gtk.Button(stock=Gtk.STOCK_CANCEL)
button.connect("clicked", self.cancel)
bbox.add(button)
button = Gtk.Button(stock=Gtk.STOCK_ADD)
if modify is False:
if scheme == 'MBR':
button.connect("clicked", self.on_add_label, self.entry,
numb, path, True)
elif scheme == 'GPT' and self.fs == 'BOOT':
button.connect("clicked", self.on_add_partition, self.entry,
numb, path, True)
elif scheme == 'GPT' and self.fs == 'UEFI' and efi_exist(self.disk) is False:
button.connect("clicked", self.on_add_partition, self.entry,
numb, path, True)
else:
button.connect("clicked", self.on_add_partition, self.entry,
numb, path, False)
else:
if scheme == 'MBR':
button.connect("clicked", self.on_add_label, self.entry, numb,
path, False)
elif scheme == 'GPT':
button.connect("clicked", self.on_add_partition, self.entry,
numb, path, False)
bbox.add(button)
box2.pack_end(bbox, True, True, 5)
self.window.show_all()
def labelEditor(self, path, pslice, size, data1, data2):
numb = int(size)
self.window = Gtk.Window()
self.window.set_title("Add Partition")
self.window.set_border_width(0)
self.window.set_size_request(480, 200)
self.window.set_icon_from_file(logo)
box1 = Gtk.VBox(False, 0)
self.window.add(box1)
box1.show()
box2 = Gtk.VBox(False, 10)
box2.set_border_width(10)
box1.pack_start(box2, True, True, 0)
box2.show()
# create label
# label0 = Gtk.Label("Create Partition Label")
table = Gtk.Table(1, 2, True)
label1 = Gtk.Label("Type:")
label2 = Gtk.Label("Size(MB):")
label3 = Gtk.Label("Mount point:")
self.fstype = Gtk.ComboBoxText()
self.fstype.append_text("UFS")
self.fstype.append_text("UFS+S")
self.fstype.append_text("UFS+J")
self.fstype.append_text("UFS+SUJ")
self.fstype.append_text("SWAP")
if data1 == 1:
read = open(boot_file, "r")
line = read.readlines()
boot = line[0].strip()
if bios_or_uefi() == "UEFI":
self.fstype.append_text("UEFI")
self.fs = "UEFI"
elif boot == "grub":
self.fstype.append_text("BIOS")
self.fs = "BIOS"
else:
self.fstype.append_text("BOOT")
self.fs = "BOOT"
if data1 == 1 and not os.path.exists(Part_label):
self.fstype.set_active(5)
elif data1 == 1 and len(self.partfile) == 0:
self.fstype.set_active(5)
elif self.lablebehind == "/":
self.fstype.set_active(4)
self.fs = "SWAP"
else:
self.fstype.set_active(3)
self.fs = "UFS+SUJ"
self.fstype.connect("changed", self.on_fs)
adj = Gtk.Adjustment(numb, 0, numb, 1, 100, 0)
self.entry = Gtk.SpinButton(adjustment=adj)
if data2 == 0:
self.entry.set_editable(False)
else:
self.entry.set_editable(True)
self.mountpoint = Gtk.ComboBoxText()
# self.mountpoint.append_text('select labels')
self.label = "none"
self.mountpoint.append_text("none")
# The space for root '/ ' is to recognise / from the file.
self.mountpoint.append_text("/")
if os.path.exists(Part_label):
if data1 == 1 and len(self.partfile) == 1:
self.mountpoint.append_text("/boot")
elif data1 == 0 and len(self.partfile) == 0:
self.mountpoint.append_text("/boot")
elif data1 == 0 and not os.path.exists(Part_label):
self.mountpoint.append_text("/boot")
self.mountpoint.append_text("/etc")
self.mountpoint.append_text("/root")
self.mountpoint.append_text("/tmp")
self.mountpoint.append_text("/usr")
self.mountpoint.append_text("/usr/home")
self.mountpoint.append_text("/var")
self.mountpoint.set_active(0)
self.mountpoint.connect("changed", self.on_label)
# table.attach(label0, 0, 2, 0, 1)
table.attach(label1, 0, 1, 1, 2)
table.attach(self.fstype, 1, 2, 1, 2)
table.attach(label2, 0, 1, 2, 3)
table.attach(self.entry, 1, 2, 2, 3)
table.attach(label3, 0, 1, 3, 4)
table.attach(self.mountpoint, 1, 2, 3, 4)
box2.pack_start(table, False, False, 0)
box2 = Gtk.HBox(False, 10)
box2.set_border_width(5)
box1.pack_start(box2, False, True, 0)
box2.show()
# Add button
bbox = Gtk.HButtonBox()
bbox.set_border_width(5)
bbox.set_spacing(10)
button = Gtk.Button(stock=Gtk.STOCK_CANCEL)
button.connect("clicked", self.cancel)
bbox.add(button)
button = Gtk.Button(stock=Gtk.STOCK_ADD)
if data2 == 1:
if data1 == 0:
button.connect("clicked", self.on_add_label, self.entry, numb, path, True)
elif data1 == 1:
button.connect("clicked", self.on_add_partition, self.entry, numb, path, True)
else:
if data1 == 0:
button.connect("clicked", self.on_add_label, self.entry, numb, path, False)
elif data1 == 1:
button.connect("clicked", self.on_add_partition, self.entry, numb, path, False)
bbox.add(button)
box2.pack_end(bbox, True, True, 5)
self.window.show_all()
def __init__(self, button3):
self.button3 = button3
self.box1 = Gtk.VBox(False, 0)
self.box1.show()
box2 = Gtk.HBox(False, 0)
self.box1.pack_start(box2, True, True, 0)
box2.show()
# Title
Title = Gtk.Label("<b><span size='xx-large'>ZFS Configuration</span></b>")
Title.set_use_markup(True)
# Chose disk
sw = Gtk.ScrolledWindow(hexpand=True, vexpand=True)
sw.set_shadow_type(Gtk.ShadowType.ETCHED_IN)
sw.set_policy(Gtk.PolicyType.AUTOMATIC, Gtk.PolicyType.AUTOMATIC)
self.store = Gtk.TreeStore(str, str, str, 'gboolean')
for disk in zfs_disk_query():
dsk = disk.partition(':')[0].rstrip()
dsk_name = disk.partition(':')[2].rstrip()
dsk_size = zfs_disk_size_query(dsk).rstrip()
self.store.append(None, [dsk, dsk_size, dsk_name, False])
treeView = Gtk.TreeView(self.store)
treeView.set_model(self.store)
treeView.set_rules_hint(True)
self.check_cell = Gtk.CellRendererToggle()
self.check_cell.set_property('activatable', True)
self.check_cell.connect('toggled', self.col1_toggled_cb, self.store)
cell = Gtk.CellRendererText()
column = Gtk.TreeViewColumn(None, cell, text=0)
column_header = Gtk.Label('Disk')
column_header.set_use_markup(True)
column_header.show()
column.set_widget(column_header)
column.set_sort_column_id(0)
cell2 = Gtk.CellRendererText()
column2 = Gtk.TreeViewColumn(None, cell2, text=0)
column_header2 = Gtk.Label('Size(MB)')
column_header2.set_use_markup(True)
column_header2.show()
column2.set_widget(column_header2)
cell3 = Gtk.CellRendererText()
column3 = Gtk.TreeViewColumn(None, cell3, text=0)
column_header3 = Gtk.Label('Name')
column_header3.set_use_markup(True)
column_header3.show()
column3.set_widget(column_header3)
column1 = Gtk.TreeViewColumn("Check", self.check_cell)
column1.add_attribute(self.check_cell, "active", 3)
column.set_attributes(cell, text=0)
column2.set_attributes(cell2, text=1)
column3.set_attributes(cell3, text=2)
treeView.append_column(column1)
treeView.append_column(column)
treeView.append_column(column2)
treeView.append_column(column3)
tree_selection = treeView.get_selection()
tree_selection.set_mode(Gtk.SelectionMode.SINGLE)
sw.add(treeView)
sw.show()
self.mirrorTips = Gtk.Label('Please select one drive')
self.mirrorTips.set_justify(Gtk.Justification.LEFT)
self.mirrorTips.set_alignment(0.01, 0.5)
# Mirro, raidz and stripe
self.mirror = 'none'
mirror_label = Gtk.Label('<b>Pool Type</b>')
mirror_label.set_use_markup(True)
mirror_box = Gtk.ComboBoxText()
mirror_box.append_text("single disk")
mirror_box.append_text("2 disk mirror")
mirror_box.append_text("3 disk raidz1")
mirror_box.append_text("4 disk raidz2")
mirror_box.append_text("5 disk raidz3")
mirror_box.append_text("2+ disk stripe")
mirror_box.connect('changed', self.mirror_selection)
mirror_box.set_active(0)
# Pool Name
self.zpool = False
pool_check = Gtk.CheckButton('Pool Name')
pool_check.connect("toggled", self.on_check_poll)
self.pool = Gtk.Entry()
self.pool.set_text('tank')
self.pool.set_sensitive(False)
# Creating MBR or GPT drive
scheme_label = Gtk.Label('<b>Partition Scheme</b>')
scheme_label.set_use_markup(True)
# Adding a combo box to selecting MBR or GPT sheme.
self.scheme = 'GPT'
shemebox = Gtk.ComboBoxText()
shemebox.append_text("GPT")
shemebox.append_text("MBR")
shemebox.connect('changed', self.sheme_selection)
shemebox.set_active(0)
if bios_or_uefi() == "UEFI":
shemebox.set_sensitive(False)
else:
shemebox.set_sensitive(True)
# Force 4k Sectors
self.zfs_four_k = "True"
zfs4kcheck = Gtk.CheckButton("Force ZFS 4k block size")
zfs4kcheck.connect("toggled", self.on_check)
zfs4kcheck.set_active(True)
# Swap Size
ram = Popen(memory, shell=True, stdin=PIPE, stdout=PIPE, stderr=STDOUT,
universal_newlines=True, close_fds=True)
mem = ram.stdout.read()
swap = 512
swp_size_label = Gtk.Label('<b>Swap Size(MB)</b>')
swp_size_label.set_use_markup(True)
self.swap_entry = Gtk.Entry()
self.swap_entry.set_text(str(swap))
self.swap_entry.connect('changed', self.digit_only)
# Swap encription
self.swap_encrypt = False
self.swap_encrypt_check = Gtk.CheckButton("Encrypt Swap")
self.swap_encrypt_check.connect("toggled", self.on_check_swap_encrypt)
# Swap mirror
self.swap_mirror = False
swap_mirror_check = Gtk.CheckButton("Mirror Swap")
swap_mirror_check.connect("toggled", self.on_check_swap_mirror)
# GELI Disk encription
self.disk_encript = False
encrypt_check = Gtk.CheckButton("Encrypt Disk")
encrypt_check.connect("toggled", self.on_check_encrypt)
encrypt_check.set_sensitive(True)
# password
self.passwd_label = Gtk.Label("Password")
self.password = Gtk.Entry()
self.password.set_sensitive(False)
self.password.set_visibility(False)
self.password.connect("changed", self.passwdstrength)
self.strenght_label = Gtk.Label()
self.strenght_label.set_alignment(0.1, 0.5)
self.vpasswd_label = Gtk.Label("Verify it")
self.repassword = Gtk.Entry()
self.repassword.set_sensitive(False)
self.repassword.set_visibility(False)
self.repassword.connect("changed", self.passwdVerification)
# set image for password matching
self.img = Gtk.Image()
self.img.set_alignment(0.2, 0.5)
# table = Gtk.Table(12, 12, True)
grid = Gtk.Grid()
grid.set_row_spacing(10)
# grid.set_column_homogeneous(True)
# grid.set_row_homogeneous(True)
grid.attach(Title, 1, 1, 10, 1)
grid.attach(mirror_label, 1, 2, 1, 1)
grid.attach(mirror_box, 2, 2, 1, 1)
grid.attach(pool_check, 7, 2, 2, 1)
grid.attach(self.pool, 9, 2, 2, 1)
grid.attach(self.mirrorTips, 1, 3, 8, 1)
grid.attach(zfs4kcheck, 9, 3, 2, 1)
grid.attach(sw, 1, 4, 10, 3)
grid.attach(scheme_label, 1, 9, 1, 1)
grid.attach(shemebox, 2, 9, 1, 1)
grid.attach(swp_size_label, 9, 9, 1, 1)
grid.attach(self.swap_entry, 10, 9, 1, 1)
# grid.attach(self.swap_encrypt_check, 9, 15, 11, 12)
# grid.attach(swap_mirror_check, 9, 15, 11, 12)
# grid.attach(encrypt_check, 2, 8, 2, 1)
# grid.attach(self.passwd_label, 1, 9, 1, 1)
# grid.attach(self.password, 2, 9, 2, 1)
# grid.attach(self.strenght_label, 4, 9, 2, 1)
# grid.attach(self.vpasswd_label, 1, 10, 1, 1)
# grid.attach(self.repassword, 2, 10, 2, 1)
# grid.attach(self.img, 4, 10, 2, 1)
box2.pack_start(grid, True, True, 10)
return
def __init__(self):
self.box1 = Gtk.VBox(False, 0)
self.box1.show()
box2 = Gtk.VBox(False, 10)
# box2.set_border_width(10)
self.box1.pack_start(box2, False, False, 0)
box2.show()
if bios_or_uefi() == "UEFI":
loader = "UEFI"
else:
loader = "BIOS"
if os.path.exists(zfs_config):
# Disk Setup
read = open(zfs_config, 'r')
schem = read.read()
# os.remove(zfs_config)
elif os.path.exists(ufs_config):
# Disk Setup
read = open(ufs_config, 'r')
schem = read.readlines()
else:
# Sheme sheme
read = open(disk_schem, 'r')
schem = read.read()
if 'GPT' in schem:
scheme = 'GPT'
else:
scheme = 'MBR'
label = Gtk.Label('<b><span size="x-large">Boot Option</span></b>')
label.set_use_markup(True)
box2.pack_start(label, False, False, 10)
hbox = Gtk.HBox()
hbox.show()
box2.pack_start(hbox, True, True, 0)
bbox1 = Gtk.VBox()
bbox1.show()
self.refind = Gtk.RadioButton.new_with_label_from_widget(
None, "Setup rEFInd boot manager")
bbox1.pack_start(self.refind, False, True, 10)
self.refind.connect("toggled", self.boot_manager, "refind")
self.refind.show()
if scheme == 'GPT' and loader == "UEFI":
self.refind.set_sensitive(True)
else:
self.refind.set_sensitive(False)
self.bsd = Gtk.RadioButton.new_with_label_from_widget(
self.refind, "Setup FreeBSD boot manager")
bbox1.pack_start(self.bsd, False, True, 10)
self.bsd.connect("toggled", self.boot_manager, "bsd")
self.bsd.show()
if scheme == 'MBR':
self.bsd.set_sensitive(True)
else:
self.bsd.set_sensitive(False)
self.none = Gtk.RadioButton.new_with_label_from_widget(
self.bsd, f"FreeBSD {loader} loader only")
bbox1.pack_start(self.none, False, True, 10)
self.none.connect("toggled", self.boot_manager, "none")
self.none.show()
hbox.pack_start(bbox1, False, False, 50)
self.none.set_active(True)
self.boot = "none"
boot = open(boot_file, 'w')
boot.writelines(self.boot)
boot.close()
self.box3 = Gtk.VBox(False, 0)
self.box3.set_border_width(0)
self.box1.pack_start(self.box3, True, True, 0)
return
def __init__(self, button3):
self.button3 = button3
self.box1 = Gtk.VBox(False, 0)
self.box1.show()
box2 = Gtk.HBox(False, 0)
self.box1.pack_start(box2, True, True, 0)
box2.show()
# Title
Title = Gtk.Label("<b><span size='xx-large'>ZFS Configuration</span></b>")
Title.set_use_markup(True)
# Chose disk
sw = Gtk.ScrolledWindow(hexpand=True, vexpand=True)
sw.set_shadow_type(Gtk.ShadowType.ETCHED_IN)
sw.set_policy(Gtk.PolicyType.AUTOMATIC, Gtk.PolicyType.AUTOMATIC)
self.store = Gtk.TreeStore(str, str, str, 'gboolean')
for disk in zfs_disk_query():
dsk = disk.partition(':')[0].rstrip()
dsk_name = disk.partition(':')[2].rstrip()
dsk_size = zfs_disk_size_query(dsk).rstrip()
self.store.append(None, [dsk, dsk_size, dsk_name, False])
treeView = Gtk.TreeView(self.store)
treeView.set_model(self.store)
treeView.set_rules_hint(True)
self.check_cell = Gtk.CellRendererToggle()
self.check_cell.set_property('activatable', True)
self.check_cell.connect('toggled', self.col1_toggled_cb, self.store)
cell = Gtk.CellRendererText()
column = Gtk.TreeViewColumn(None, cell, text=0)
column_header = Gtk.Label('Disk')
column_header.set_use_markup(True)
column_header.show()
column.set_widget(column_header)
column.set_sort_column_id(0)
cell2 = Gtk.CellRendererText()
column2 = Gtk.TreeViewColumn(None, cell2, text=0)
column_header2 = Gtk.Label('Size(MB)')
column_header2.set_use_markup(True)
column_header2.show()
column2.set_widget(column_header2)
cell3 = Gtk.CellRendererText()
column3 = Gtk.TreeViewColumn(None, cell3, text=0)
column_header3 = Gtk.Label('Name')
column_header3.set_use_markup(True)
column_header3.show()
column3.set_widget(column_header3)
column1 = Gtk.TreeViewColumn("Check", self.check_cell)
column1.add_attribute(self.check_cell, "active", 3)
column.set_attributes(cell, text=0)
column2.set_attributes(cell2, text=1)
column3.set_attributes(cell3, text=2)
treeView.append_column(column1)
treeView.append_column(column)
treeView.append_column(column2)
treeView.append_column(column3)
tree_selection = treeView.get_selection()
tree_selection.set_mode(Gtk.SelectionMode.SINGLE)
sw.add(treeView)
sw.show()
self.mirrorTips = Gtk.Label('Please select one drive')
self.mirrorTips.set_justify(Gtk.Justification.LEFT)
self.mirrorTips.set_alignment(0.01, 0.5)
# Mirro, raidz and stripe
self.mirror = 'none'
mirror_label = Gtk.Label('<b>Pool Type</b>')
mirror_label.set_use_markup(True)
mirror_box = Gtk.ComboBoxText()
mirror_box.append_text("single disk")
mirror_box.append_text("2 disk mirror")
mirror_box.append_text("3 disk raidz1")
mirror_box.append_text("4 disk raidz2")
mirror_box.append_text("5 disk raidz3")
mirror_box.append_text("2+ disk stripe")
mirror_box.connect('changed', self.mirror_selection)
mirror_box.set_active(0)
# Pool Name
self.zpool = False
pool_check = Gtk.CheckButton('Pool Name')
pool_check.connect("toggled", self.on_check_poll)
self.pool = Gtk.Entry()
self.pool.set_text('tank')
self.pool.set_sensitive(False)
# Creating MBR or GPT drive
scheme_label = Gtk.Label('<b>Partition Scheme</b>')
scheme_label.set_use_markup(True)
# Adding a combo box to selecting MBR or GPT sheme.
self.scheme = 'GPT'
shemebox = Gtk.ComboBoxText()
shemebox.append_text("GPT")
shemebox.append_text("MBR")
shemebox.connect('changed', self.sheme_selection)
shemebox.set_active(0)
if bios_or_uefi() == "UEFI":
shemebox.set_sensitive(False)
else:
shemebox.set_sensitive(True)
# Force 4k Sectors
self.zfs_four_k = "True"
zfs4kcheck = Gtk.CheckButton("Force ZFS 4k block size")
zfs4kcheck.connect("toggled", self.on_check)
zfs4kcheck.set_active(True)
# Swap Size
# ram = Popen(memory, shell=True, stdin=PIPE, stdout=PIPE, stderr=STDOUT,
# universal_newlines=True, close_fds=True)
# mem = ram.stdout.read()
swap = 2048
swp_size_label = Gtk.Label('<b>Swap Size(MB)</b>')
swp_size_label.set_use_markup(True)
self.swap_entry = Gtk.Entry()
self.swap_entry.set_text(str(swap))
self.swap_entry.connect('changed', self.digit_only)
# Swap encription
self.swap_encrypt = False
self.swap_encrypt_check = Gtk.CheckButton("Encrypt Swap")
self.swap_encrypt_check.connect("toggled", self.on_check_swap_encrypt)
# Swap mirror
self.swap_mirror = False
swap_mirror_check = Gtk.CheckButton("Mirror Swap")
swap_mirror_check.connect("toggled", self.on_check_swap_mirror)
# GELI Disk encription
self.disk_encript = False
encrypt_check = Gtk.CheckButton("Encrypt Disk")
encrypt_check.connect("toggled", self.on_check_encrypt)
encrypt_check.set_sensitive(True)
# password
self.passwd_label = Gtk.Label("Password")
self.password = Gtk.Entry()
self.password.set_sensitive(False)
self.password.set_visibility(False)
self.password.connect("changed", self.passwdstrength)
self.strenght_label = Gtk.Label()
self.strenght_label.set_alignment(0.1, 0.5)
self.vpasswd_label = Gtk.Label("Verify it")
self.repassword = Gtk.Entry()
self.repassword.set_sensitive(False)
self.repassword.set_visibility(False)
self.repassword.connect("changed", self.passwdVerification)
# set image for password matching
self.img = Gtk.Image()
self.img.set_alignment(0.2, 0.5)
# table = Gtk.Table(12, 12, True)
grid = Gtk.Grid()
grid.set_row_spacing(10)
# grid.set_column_homogeneous(True)
# grid.set_row_homogeneous(True)
grid.attach(Title, 1, 1, 10, 1)
grid.attach(mirror_label, 1, 2, 1, 1)
grid.attach(mirror_box, 2, 2, 1, 1)
grid.attach(pool_check, 7, 2, 2, 1)
grid.attach(self.pool, 9, 2, 2, 1)
grid.attach(self.mirrorTips, 1, 3, 8, 1)
grid.attach(zfs4kcheck, 9, 3, 2, 1)
grid.attach(sw, 1, 4, 10, 3)
grid.attach(scheme_label, 1, 9, 1, 1)
grid.attach(shemebox, 2, 9, 1, 1)
grid.attach(swp_size_label, 9, 9, 1, 1)
grid.attach(self.swap_entry, 10, 9, 1, 1)
# grid.attach(self.swap_encrypt_check, 9, 15, 11, 12)
# grid.attach(swap_mirror_check, 9, 15, 11, 12)
# grid.attach(encrypt_check, 2, 8, 2, 1)
# grid.attach(self.passwd_label, 1, 9, 1, 1)
# grid.attach(self.password, 2, 9, 2, 1)
# grid.attach(self.strenght_label, 4, 9, 2, 1)
# grid.attach(self.vpasswd_label, 1, 10, 1, 1)
# grid.attach(self.repassword, 2, 10, 2, 1)
# grid.attach(self.img, 4, 10, 2, 1)
box2.pack_start(grid, True, True, 10)
return
detect_sheme = '%sdetect-sheme.sh' % query
part = '%sdisk-part.sh' % query
memory = 'sysctl hw.physmem'
disk_list = '%sdisk-list.sh' % query
disk_info = '%sdisk-info.sh' % query
disk_label = '%sdisk-label.sh' % query
disk_schem = '%sscheme' % tmp
disk_file = '%sdisk' % tmp
psize = '%spart_size' % tmp
logo = "/usr/local/lib/gbi/logo.png"
Part_label = '%spartlabel' % tmp
part_schem = '%sscheme' % tmp
partition_db = "%spartition_db/" % tmp
ufs_Partiton_list = []
bios_type = bios_or_uefi()
class Partitions():
def on_fs(self, widget):
self.fs = widget.get_active_text()
if 'UFS' in self.fs:
self.mountpoint.set_sensitive(True)
else:
self.mountpoint.set_sensitive(False)
def on_label(self, widget):
self.label = widget.get_active_text()
def save_selection(self):
pass
def __init__(self):
self.box1 = Gtk.VBox(False, 0)
self.box1.show()
box2 = Gtk.VBox(False, 10)
# box2.set_border_width(10)
self.box1.pack_start(box2, False, False, 0)
box2.show()
if bios_or_uefi() == "UEFI":
loader = "UEFI"
else:
loader = "BIOS"
if os.path.exists(zfs_config):
# Disk Setup
read = open(zfs_config, 'r')
schem = read.read()
# os.remove(zfs_config)
elif os.path.exists(ufs_config):
# Disk Setup
read = open(ufs_config, 'r')
schem = read.readlines()
else:
# Sheme sheme
read = open(disk_schem, 'r')
schem = read.read()
if 'GPT' in schem:
scheme = 'GPT'
else:
scheme = 'MBR'
label = Gtk.Label('<b><span size="x-large">Boot Option</span></b>')
label.set_use_markup(True)
box2.pack_start(label, False, False, 10)
hbox = Gtk.HBox()
hbox.show()
box2.pack_start(hbox, True, True, 0)
bbox1 = Gtk.VBox()
bbox1.show()
self.refind = Gtk.RadioButton.new_with_label_from_widget(None, "Setup rEFInd boot manager")
bbox1.pack_start(self.refind, False, True, 10)
self.refind.connect("toggled", self.boot_manager, "refind")
self.refind.show()
if scheme == 'GPT' and loader == "UEFI":
self.refind.set_sensitive(True)
else:
self.refind.set_sensitive(False)
self.bsd = Gtk.RadioButton.new_with_label_from_widget(self.refind, "Setup FreeBSD boot manager")
bbox1.pack_start(self.bsd, False, True, 10)
self.bsd.connect("toggled", self.boot_manager, "bsd")
self.bsd.show()
if scheme == 'MBR':
self.bsd.set_sensitive(True)
else:
self.bsd.set_sensitive(False)
self.none = Gtk.RadioButton.new_with_label_from_widget(self.bsd, f"FreeBSD {loader} loader only")
bbox1.pack_start(self.none, False, True, 10)
self.none.connect("toggled", self.boot_manager, "none")
self.none.show()
hbox.pack_start(bbox1, False, False, 50)
self.none.set_active(True)
self.boot = "none"
boot = open(boot_file, 'w')
boot.writelines(self.boot)
boot.close()
self.box3 = Gtk.VBox(False, 0)
self.box3.set_border_width(0)
self.box1.pack_start(self.box3, True, True, 0)
return
def __init__(self, button3):
self.button3 = button3
self.box1 = Gtk.VBox(False, 0)
self.box1.show()
box2 = Gtk.HBox(False, 0)
self.box1.pack_start(box2, True, True, 0)
box2.show()
# Title
Title = Gtk.Label(
"<b><span size='xx-large'>UFS Full Disk Configuration</span></b>")
Title.set_use_markup(True)
# Chose disk
sw = Gtk.ScrolledWindow(hexpand=True, vexpand=True)
sw.set_shadow_type(Gtk.ShadowType.ETCHED_IN)
sw.set_policy(Gtk.PolicyType.AUTOMATIC, Gtk.PolicyType.AUTOMATIC)
store = Gtk.TreeStore(str, str, str, 'gboolean')
for disk in zfs_disk_query():
dsk = disk.partition(':')[0].rstrip()
dsk_name = disk.partition(':')[2].rstrip()
dsk_size = zfs_disk_size_query(dsk).rstrip()
store.append(None, [dsk, dsk_size, dsk_name, False])
treeView = Gtk.TreeView(store)
treeView.set_model(store)
treeView.set_rules_hint(True)
self.check_cell = Gtk.CellRendererToggle()
self.check_cell.set_property('activatable', True)
self.check_cell.connect('toggled', self.col1_toggled_cb, store)
cell = Gtk.CellRendererText()
column = Gtk.TreeViewColumn(None, cell, text=0)
column_header = Gtk.Label('Disk')
column_header.set_use_markup(True)
column_header.show()
column.set_widget(column_header)
column.set_sort_column_id(0)
cell2 = Gtk.CellRendererText()
column2 = Gtk.TreeViewColumn(None, cell2, text=0)
column_header2 = Gtk.Label('Size(MB)')
column_header2.set_use_markup(True)
column_header2.show()
column2.set_widget(column_header2)
cell3 = Gtk.CellRendererText()
column3 = Gtk.TreeViewColumn(None, cell3, text=0)
column_header3 = Gtk.Label('Name')
column_header3.set_use_markup(True)
column_header3.show()
column3.set_widget(column_header3)
column1 = Gtk.TreeViewColumn("Check", self.check_cell)
column1.add_attribute(self.check_cell, "active", 3)
column.set_attributes(cell, text=0)
column2.set_attributes(cell2, text=1)
column3.set_attributes(cell3, text=2)
treeView.append_column(column1)
treeView.append_column(column)
treeView.append_column(column2)
treeView.append_column(column3)
tree_selection = treeView.get_selection()
tree_selection.set_mode(Gtk.SelectionMode.SINGLE)
sw.add(treeView)
sw.show()
self.mirrorTips = Gtk.Label('Please select one drive')
self.mirrorTips.set_justify(Gtk.Justification.LEFT)
self.mirrorTips.set_alignment(0.01, 0.5)
self.mirror = False
mirror_check = Gtk.CheckButton('Disk Mirror')
mirror_check.connect("toggled", self.on_check_mirror)
self.mirrorbl_box = Gtk.ComboBoxText()
self.mirrorbl_box.append_text("load")
self.mirrorbl_box.append_text("prefer")
self.mirrorbl_box.append_text("round-robin")
self.mirrorbl_box.append_text("split")
self.mirrorbl_box.connect('changed', self.mirror_selection)
self.mirrorbl_box.set_active(0)
self.mirrorbl_box.set_sensitive(False)
self.mirrorbl = 'load'
# Creating MBR or GPT drive
label = Gtk.Label('<b>Partition Scheme</b>')
label.set_use_markup(True)
# Adding a combo box to selecting MBR or GPT sheme.
self.scheme = 'GPT'
shemebox = Gtk.ComboBoxText()
shemebox.append_text("GPT")
shemebox.append_text("MBR")
shemebox.connect('changed', self.sheme_selection)
shemebox.set_active(0)
if bios_or_uefi() == "UEFI":
shemebox.set_sensitive(False)
else:
shemebox.set_sensitive(True)
# Swap Size
ram = Popen(memory,
shell=True,
stdin=PIPE,
stdout=PIPE,
stderr=STDOUT,
universal_newlines=True,
close_fds=True)
mem = ram.stdout.read()
swap = 2048
swp_size_label = Gtk.Label('<b>Swap Size(MB)</b>')
swp_size_label.set_use_markup(True)
self.swap_entry = Gtk.Entry()
self.swap_entry.set_text(str(swap))
self.swap_entry.connect('changed', self.digit_only)
# Swap encription
self.swap_encrypt = False
self.swap_encrypt_check = Gtk.CheckButton("Encrypt Swap")
self.swap_encrypt_check.connect("toggled", self.on_check_swap_encrypt)
# Swap mirror
self.swap_mirror = False
swap_mirror_check = Gtk.CheckButton("Mirror Swap")
swap_mirror_check.connect("toggled", self.on_check_swap_mirror)
# GELI Disk encription
self.disk_encript = False
encrypt_check = Gtk.CheckButton("Encrypt Disk")
encrypt_check.connect("toggled", self.on_check_encrypt)
encrypt_check.set_sensitive(True)
# password
self.passwd_label = Gtk.Label("Password")
self.password = Gtk.Entry()
self.password.set_sensitive(False)
self.password.set_visibility(False)
self.password.connect("changed", self.passwdstrength)
self.strenght_label = Gtk.Label()
self.strenght_label.set_alignment(0.1, 0.5)
self.vpasswd_label = Gtk.Label("Verify it")
self.repassword = Gtk.Entry()
self.repassword.set_sensitive(False)
self.repassword.set_visibility(False)
self.repassword.connect("changed", self.passwdVerification)
# set image for password matching
fslabel = Gtk.Label("File System:")
self.fstype = Gtk.ComboBoxText()
self.fstype.append_text('UFS')
self.fstype.append_text('UFS+S')
self.fstype.append_text('UFS+J')
self.fstype.append_text('UFS+SUJ')
self.fstype.set_active(3)
self.fstype.connect("changed", self.chosefs)
self.fs = "UFS+SUJ"
grid = Gtk.Grid()
grid.set_row_spacing(10)
# grid.set_column_homogeneous(True)
# grid.set_row_homogeneous(True)
grid.attach(Title, 0, 0, 9, 2)
grid.attach(mirror_check, 0, 2, 1, 1)
grid.attach(self.mirrorbl_box, 1, 2, 1, 1)
grid.attach(label, 0, 9, 2, 1)
grid.attach(shemebox, 2, 9, 1, 1)
grid.attach(self.mirrorTips, 1, 3, 8, 1)
grid.attach(sw, 0, 4, 9, 4)
grid.attach(fslabel, 5, 9, 2, 1)
grid.attach(self.fstype, 7, 9, 1, 1)
grid.attach(swp_size_label, 5, 2, 2, 1)
grid.attach(self.swap_entry, 7, 2, 1, 1)
# grid.attach(self.swap_encrypt_check, 9, 15, 11, 12)
# grid.attach(swap_mirror_check, 9, 15, 11, 12)
# grid.attach(encrypt_check, 1, 9, 2, 1)
# grid.attach(self.passwd_label, 1, 10, 1, 1)
# grid.attach(self.password, 2, 10, 2, 1)
# grid.attach(self.strenght_label, 4, 10, 2, 1)
# grid.attach(self.vpasswd_label, 1, 11, 1, 1)
# grid.attach(self.repassword, 2, 11, 2, 1)
# grid.attach(self.img, 4, 11, 2, 1)
box2.pack_start(grid, True, True, 10)
return
