def _reports_skip_new_node(new_node_name, reason_type): assert reason_type in {"unreachable", "not_live_cib"} return [ ReportItem.info( reports.messages.FilesDistributionSkipped(reason_type, ["pacemaker authkey"], [new_node_name])), ReportItem.info( reports.messages.ServiceCommandsOnNodesSkipped( reason_type, ["pacemaker_remote start", "pacemaker_remote enable"], [new_node_name], )), ]
def _report_skip_live_parts_in_remove(node_names_list): return [ ReportItem.info( reports.messages.ServiceCommandsOnNodesSkipped( reports.const.REASON_NOT_LIVE_CIB, ["pacemaker_remote stop", "pacemaker_remote disable"], node_names_list, )), ReportItem.info( reports.messages.FilesRemoveFromNodesSkipped( reports.const.REASON_NOT_LIVE_CIB, ["pacemaker authkey"], node_names_list, )), ]
def find_valid_resource_agent_by_name( report_processor: ReportProcessor, runner: CommandRunner, name: str, allowed_absent=False, absent_agent_supported=True, ): """ Return instance of ResourceAgent corresponding to name report_processor -- tool for warning/info/error reporting runner -- tool for launching external commands name -- specifies a searched agent absent_agent_supported -- flag decides if is possible to allow to return absent agent: if is produced forceable/no-forcable error """ if ":" not in name: agent = guess_exactly_one_resource_agent_full_name(runner, name) report_processor.report( ReportItem.info( reports.messages.AgentNameGuessed(name, agent.get_name()))) return agent return _find_valid_agent_by_name( report_processor, runner, name, ResourceAgent, AbsentResourceAgent if allowed_absent else None, absent_agent_supported=absent_agent_supported, )
def booth_fetching_config_from_node_started(node, config=None): """ fetching of booth config from specified node started node -- node from which config is fetching config -- config name """ return ReportItem.info(report_codes.BOOTH_FETCHING_CONFIG_FROM_NODE, info={ "node": node, "config": config, })
def booth_config_accepted_by_node(node=None, name_list=None): """ Booth config has been saved on specified node. node -- name of node name_list -- list of names of booth instance """ return ReportItem.info(report_codes.BOOTH_CONFIG_ACCEPTED_BY_NODE, info={ "node": node, "name_list": sorted(name_list) if name_list else "" })
def node_add_guest( env: LibraryEnvironment, node_name, resource_id, options, skip_offline_nodes=False, allow_incomplete_distribution=False, allow_pacemaker_remote_service_fail=False, wait: WaitType = False, ): # pylint: disable=too-many-branches # pylint: disable=too-many-locals # pylint: disable=too-many-statements """ Make a guest node from the specified resource LibraryEnvironment env -- provides all for communication with externals string node_name -- name of the guest node string resource_id -- specifies resource that should become a guest node dict options -- guest node options (remote-port, remote-addr, remote-connect-timeout) bool skip_offline_nodes -- if True, ignore when some nodes are offline bool allow_incomplete_distribution -- if True, allow this command to finish successfully even if file distribution did not succeed bool allow_pacemaker_remote_service_fail -- if True, allow this command to finish successfully even if starting/enabling pacemaker_remote did not succeed mixed wait -- a flag for controlling waiting for pacemaker idle mechanism """ wait_timeout = env.ensure_wait_satisfiable(wait) report_processor = env.report_processor cib = env.get_cib() id_provider = IdProvider(cib) corosync_conf: Optional[CorosyncConfigFacade] if env.is_cib_live: corosync_conf = env.get_corosync_conf() else: corosync_conf = None report_processor.report( ReportItem.info( reports.messages.CorosyncNodeConflictCheckSkipped( reports.const.REASON_NOT_LIVE_CIB, ))) ( existing_nodes_names, existing_nodes_addrs, report_list, ) = get_existing_nodes_names_addrs(corosync_conf, cib) if env.is_cib_live: # We just reported corosync checks are going to be skipped so we # shouldn't complain about errors related to corosync nodes report_processor.report_list(report_list) existing_target_list = [] if env.is_cib_live: target_factory = env.get_node_target_factory() existing_target_list, new_target_list = _get_targets_for_add( target_factory, report_processor, existing_nodes_names, [node_name], skip_offline_nodes, ) new_target = new_target_list[0] if new_target_list else None # default remote-addr to an address from known-hosts if "remote-addr" not in options or options["remote-addr"] is None: if new_target: new_addr = new_target.first_addr new_addr_source = ( reports.const.DEFAULT_ADDRESS_SOURCE_KNOWN_HOSTS) else: new_addr = node_name new_addr_source = reports.const.DEFAULT_ADDRESS_SOURCE_HOST_NAME options["remote-addr"] = new_addr report_processor.report( ReportItem.info( reports.messages.UsingDefaultAddressForHost( node_name, new_addr, new_addr_source))) else: # default remote-addr to an address from known-hosts if "remote-addr" not in options or options["remote-addr"] is None: known_hosts = env.get_known_hosts([node_name]) if known_hosts: new_addr = known_hosts[0].dest.addr new_addr_source = ( reports.const.DEFAULT_ADDRESS_SOURCE_KNOWN_HOSTS) else: new_addr = node_name new_addr_source = reports.const.DEFAULT_ADDRESS_SOURCE_HOST_NAME options["remote-addr"] = new_addr report_processor.report( ReportItem.info( reports.messages.UsingDefaultAddressForHost( node_name, new_addr, new_addr_source))) # validate inputs report_list = guest_node.validate_set_as_guest(cib, existing_nodes_names, existing_nodes_addrs, node_name, options) searcher = ElementSearcher(primitive.TAG, resource_id, get_resources(cib)) if searcher.element_found(): resource_element = searcher.get_element() report_list.extend(guest_node.validate_is_not_guest(resource_element)) else: report_list.extend(searcher.get_errors()) report_processor.report_list(report_list) if report_processor.has_errors: raise LibraryError() # everything validated, let's set it up guest_node.set_as_guest( resource_element, id_provider, node_name, options.get("remote-addr", None), options.get("remote-port", None), options.get("remote-connect-timeout", None), ) if env.is_cib_live: _prepare_pacemaker_remote_environment( env, report_processor, existing_target_list, new_target, node_name, skip_offline_nodes, allow_incomplete_distribution, allow_pacemaker_remote_service_fail, ) else: report_processor.report_list( _reports_skip_new_node(node_name, "not_live_cib")) env.push_cib(wait_timeout=wait_timeout) if wait_timeout >= 0: _ensure_resource_running(env, resource_id)
def node_add_remote( env: LibraryEnvironment, node_name: str, node_addr: Optional[str], operations: Iterable[Mapping[str, str]], meta_attributes: Mapping[str, str], instance_attributes: Mapping[str, str], skip_offline_nodes: bool = False, allow_incomplete_distribution: bool = False, allow_pacemaker_remote_service_fail: bool = False, allow_invalid_operation: bool = False, allow_invalid_instance_attributes: bool = False, use_default_operations: bool = True, wait: WaitType = False, ): # pylint: disable=too-many-arguments # pylint: disable=too-many-branches # pylint: disable=too-many-locals # pylint: disable=too-many-statements """ create an ocf:pacemaker:remote resource and use it as a remote node env -- provides all for communication with externals node_name -- the name of the new node node_addr -- the address of the new node or None for default operations -- attributes for each entered operation meta_attributes -- attributes for primitive/meta_attributes instance_attributes -- attributes for primitive/instance_attributes skip_offline_nodes -- if True, ignore when some nodes are offline allow_incomplete_distribution -- if True, allow this command to finish successfully even if file distribution did not succeed allow_pacemaker_remote_service_fail -- if True, allow this command to finish successfully even if starting/enabling pacemaker_remote did not succeed allow_invalid_operation -- if True, allow to use operations that are not listed in a resource agent metadata allow_invalid_instance_attributes -- if True, allow to use instance attributes that are not listed in a resource agent metadata and allow to omit required instance_attributes use_default_operations -- if True, add operations specified in a resource agent metadata to the resource wait -- a flag for controlling waiting for pacemaker idle mechanism """ wait_timeout = env.ensure_wait_satisfiable(wait) report_processor = env.report_processor cib = env.get_cib( minimal_version=get_required_cib_version_for_primitive(operations)) id_provider = IdProvider(cib) if env.is_cib_live: corosync_conf: Optional[CorosyncConfigFacade] = env.get_corosync_conf() else: corosync_conf = None report_processor.report( ReportItem.info( reports.messages.CorosyncNodeConflictCheckSkipped( reports.const.REASON_NOT_LIVE_CIB, ))) ( existing_nodes_names, existing_nodes_addrs, report_list, ) = get_existing_nodes_names_addrs(corosync_conf, cib) if env.is_cib_live: # We just reported corosync checks are going to be skipped so we # shouldn't complain about errors related to corosync nodes report_processor.report_list(report_list) try: resource_agent_facade = ResourceAgentFacadeFactory( env.cmd_runner(), report_processor).facade_from_parsed_name(remote_node.AGENT_NAME) except ResourceAgentError as e: report_processor.report(resource_agent_error_to_report_item(e)) raise LibraryError() from e existing_target_list = [] if env.is_cib_live: target_factory = env.get_node_target_factory() existing_target_list, new_target_list = _get_targets_for_add( target_factory, report_processor, existing_nodes_names, [node_name], skip_offline_nodes, ) new_target = new_target_list[0] if new_target_list else None # default node_addr to an address from known-hosts if node_addr is None: if new_target: node_addr = new_target.first_addr node_addr_source = ( reports.const.DEFAULT_ADDRESS_SOURCE_KNOWN_HOSTS) else: node_addr = node_name node_addr_source = ( reports.const.DEFAULT_ADDRESS_SOURCE_HOST_NAME) report_processor.report( ReportItem.info( reports.messages.UsingDefaultAddressForHost( node_name, node_addr, node_addr_source))) else: # default node_addr to an address from known-hosts if node_addr is None: known_hosts = env.get_known_hosts([node_name]) if known_hosts: node_addr = known_hosts[0].dest.addr node_addr_source = ( reports.const.DEFAULT_ADDRESS_SOURCE_KNOWN_HOSTS) else: node_addr = node_name node_addr_source = ( reports.const.DEFAULT_ADDRESS_SOURCE_HOST_NAME) report_processor.report( ReportItem.info( reports.messages.UsingDefaultAddressForHost( node_name, node_addr, node_addr_source))) # validate inputs report_list = remote_node.validate_create( existing_nodes_names, existing_nodes_addrs, resource_agent_facade.metadata, node_name, node_addr, instance_attributes, ) if report_processor.report_list(report_list).has_errors: raise LibraryError() # validation + cib setup # TODO extract the validation to a separate function try: remote_resource_element = remote_node.create( env.report_processor, resource_agent_facade, get_resources(cib), id_provider, node_addr, node_name, operations, meta_attributes, instance_attributes, allow_invalid_operation, allow_invalid_instance_attributes, use_default_operations, ) except LibraryError as e: # Check unique id conflict with check against nodes. Until validation # resource create is not separated, we need to make unique post # validation. already_exists = [] unified_report_list = [] for report_item in report_list + list(e.args): # pylint: disable=no-member dto_obj = report_item.message.to_dto() if dto_obj.code not in ( reports.codes.ID_ALREADY_EXISTS, reports.codes.RESOURCE_INSTANCE_ATTR_VALUE_NOT_UNIQUE, ): unified_report_list.append(report_item) elif ("id" in dto_obj.payload and dto_obj.payload["id"] not in already_exists): unified_report_list.append(report_item) already_exists.append(dto_obj.payload["id"]) report_list = unified_report_list report_processor.report_list(report_list) if report_processor.has_errors: raise LibraryError() # everything validated, let's set it up if env.is_cib_live: _prepare_pacemaker_remote_environment( env, report_processor, existing_target_list, new_target, node_name, skip_offline_nodes, allow_incomplete_distribution, allow_pacemaker_remote_service_fail, ) else: report_processor.report_list( _reports_skip_new_node(node_name, "not_live_cib")) env.push_cib(wait_timeout=wait_timeout) if wait_timeout >= 0: _ensure_resource_running(env, remote_resource_element.attrib["id"])
def booth_config_distribution_started(): """ booth configuration is about to be sent to nodes """ return ReportItem.info(report_codes.BOOTH_CONFIG_DISTRIBUTION_STARTED, )