hb2img = texs.loadTexture("textures/hornbeam2.png")
#myecube = EnvironmentCube(900.0,"HALFCROSS")
ectex=loadECfiles("textures/ecubes","sbox",texs)
myecube = EnvironmentCube(900.0,"FACES")
light = Light(0, 10,10,10, "", 0,100,0)
light.on()
# Create elevation map
mapwidth=1000.0
mapdepth=1000.0
mapheight=60.0
mountimg1 = texs.loadTexture("textures/mountains3_512.jpg")
mymap = ElevationMap("textures/mountainsHgt.jpg",mapwidth,mapdepth,mapheight,64,64) #testislands.jpg
#Create tree models
treeplane = Plane(4.0,5.0)
treemodel1 = MergeShape("baretree")
treemodel1.add(treeplane, 0,0,0)
treemodel1.add(treeplane, 0,0,0, 0,90,0)
treemodel2 = MergeShape("bushytree")
treemodel2.add(treeplane, 0,0,0)
treemodel2.add(treeplane, 0,0,0, 0,60,0)
treemodel2.add(treeplane, 0,0,0, 0,120,0)
#Create grass model
grassplane = Plane(1.0,0.3,"",0,-2,0)
ectex = EnvironmentCube.loadECfiles('textures/ecubes/Miramar', 'miramar_256',
suffix='png')
myecube = EnvironmentCube.EnvironmentCube(size=1800.0, maptype='FACES')
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth = 2000.0
mapdepth = 2000.0
mapheight = 100.0
mountimg1 = Texture('textures/mountains3_512.jpg')
bumpimg = Texture('textures/grasstile_n.jpg')
tigerbmp = Texture('models/Tiger/tiger_bump.jpg')
topbmp = Texture('models/Tiger/top_bump.jpg')
#roadway = Texture('textures/road5.png')
mymap = ElevationMap(mapfile='textures/mountainsHgt2.png',
width=mapwidth, depth=mapdepth,
height=mapheight, divx=64, divy=64)
mymap.buf[0].set_draw_details(shader, [mountimg1, bumpimg], 128.0, 0.0)
FOG = (0.7, 0.8, 0.9, 0.5)
def set_fog(shape):
shape.set_fog(FOG, 1000.0)
def make_model(filename, name, x=0, y=0, z=0, rx=0, ry=0, rz=0):
model = Model(file_string='models/' + filename,
name=name, x=x, y=y, z=z, rx=rx, ry=ry, rz=rz,
sx=0.1, sy=0.1, sz=0.1)
model.set_shader(shader)
set_fog(model)
# Load textures
texs = Textures()
tree2img = texs.loadTexture("textures/tree2.png")
tree1img = texs.loadTexture("textures/tree1.png")
hb2img = texs.loadTexture("textures/hornbeam2.png")
ectex = texs.loadTexture("textures/ecubes/skybox_stormydays.jpg")
myecube = EnvironmentCube(900.0,"CROSS")
# Create elevation map
mapwidth=1000.0
mapdepth=1000.0
mapheight=60.0
landimg = texs.loadTexture("textures/stonygrass.jpg")
mymap = ElevationMap("textures/mountainsHgt.jpg", mapwidth, mapdepth, mapheight, 64, 64, 10.0, "fw", 0,0,0,0,0,0,1,1,1,0,0,0,True) #testislands.jpg
#mymap2 = ElevationMap("textures/mountainsHgt.jpg",mapwidth,mapdepth,mapheight,64,64, 128)
myclip = ClipPlane()
light = Light(0, 2,2,3, "", 5,5,0)
light.on()
#Create tree models
treeplane = Plane(4.0,5.0)
treemodel1 = MergeShape("baretree")
treemodel1.add(treeplane, 0,0,0)
treemodel1.add(treeplane, 0,0,0, 0,90,0)
treemodel2 = MergeShape("bushytree")
FOG = ((0.3, 0.3, 0.4, 0.5), 650.0)
TFOG = ((0.2, 0.24, 0.22, 0.3), 150.0)
#myecube = EnvironmentCube(900.0,"HALFCROSS")
ectex=loadECfiles("textures/ecubes","sbox")
myecube = EnvironmentCube(size=900.0, maptype="FACES", name="cube")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth = 1000.0
mapdepth = 1000.0
mapheight = 60.0
mountimg1 = Texture("textures/mountains3_512.jpg")
mymap = ElevationMap("textures/mountainsHgt.jpg", name="map",
width=mapwidth, depth=mapdepth, height=mapheight,
divx=32, divy=32) #testislands.jpg
mymap.buf[0].set_draw_details(shader, [mountimg1, bumpimg, reflimg], 128.0, 0.0)
mymap.set_fog(*FOG)
#Create tree models
treeplane = Plane(w=4.0, h=5.0)
treemodel1 = MergeShape(name="baretree")
treemodel1.add(treeplane.buf[0], 0,0,0)
treemodel1.add(treeplane.buf[0], 0,0,0, 0,90,0)
treemodel2 = MergeShape(name="bushytree")
treemodel2.add(treeplane.buf[0], 0,0,0)
treemodel2.add(treeplane.buf[0], 0,0,0, 0,60,0)
treemodel2.add(treeplane.buf[0], 0,0,0, 0,120,0)
monsttex = Texture("textures/floor_nm.jpg")
shineimg = Texture("textures/stars.jpg")
# environment cube
ectex = Texture("textures/ecubes/skybox_stormydays.jpg")
myecube = EnvironmentCube(size=900.0, maptype="CROSS")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth = 1000.0
mapdepth = 1000.0
mapheight = 100.0
mymap = ElevationMap("textures/maze1.jpg",
width=mapwidth,
depth=mapdepth,
height=mapheight,
divx=128,
divy=128,
name="sub")
mymap.set_draw_details(shader, [rockimg1, rockimg2, shineimg], 128.0, 0.05)
# Create fog for more realistic fade in distance. This can be turned on and off between drawing different object (i.e backgound not foggy)
mymap.set_fog((0.1, 0.1, 0.1, 1.0), 200.0)
#Create tree models
treeplane = Plane(w=4.0, h=5.0)
treemodel1 = MergeShape(name="baretree")
treemodel1.add(treeplane.buf[0], 0, 0, 0)
treemodel1.add(treeplane.buf[0], 0, 0, 0, 0, 90, 0)
TFOG = ((0.1, 0.14, 0.12, 0.3), 150.0)
#myecube = EnvironmentCube(900.0,"HALFCROSS")
ectex = loadECfiles("textures/ecubes", "sbox")
myecube = EnvironmentCube(size=900.0, maptype="FACES", name="cube")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth = 1000.0
mapdepth = 1000.0
mapheight = 60.0
mountimg1 = Texture("textures/mountains3_512.jpg")
mymap = ElevationMap("textures/mountainsHgt.jpg",
name="map",
width=mapwidth,
depth=mapdepth,
height=mapheight,
divx=32,
divy=32) #testislands.jpg
mymap.buf[0].set_draw_details(shader, [mountimg1, bumpimg, reflimg], 128.0,
0.0)
mymap.set_fog(*FOG)
#Create tree models
treeplane = Plane(w=4.0, h=5.0)
treemodel1 = MergeShape(name="baretree")
treemodel1.add(treeplane.buf[0], 0, 0, 0)
treemodel1.add(treeplane.buf[0], 0, 0, 0, 0, 90, 0)
treemodel2 = MergeShape(name="bushytree")
#monster
monster = Plane(camera, light, 5.0, 5.0, "monster", 0, 0, 0, 0, 0, 0)
monster.buf[0].set_draw_details(flatsh, [monstimg])
# Create elevation map
mapwidth = 50.0
mapdepth = 50.0
maphalf = 22.0
mapheight = 40.0
mymap = ElevationMap("textures/pong.jpg",
camera=camera,
light=light,
width=mapwidth,
depth=mapdepth,
height=mapheight,
divx=32,
divy=32,
ntiles=4,
name="sub")
mymap.buf[0].set_draw_details(shader, [groundimg, groundimg, ballimg], 1.0,
0.0)
#avatar camera
avhgt = 2.0
xm = 0.0
zm = 0.0
ym = 0.0
lastX0 = 0.0
lastZ0 = 0.0
camera.position((xm, 2 + ym, -maphalf - 2.5))
raspimg = Texture("textures/Raspi256x256.png")
monstimg = Texture("textures/pong2.jpg")
monsttex = Texture("textures/floor_nm.jpg")
shineimg = Texture("textures/stars.jpg")
# environment cube
ectex = Texture("textures/ecubes/skybox_stormydays.jpg")
myecube = EnvironmentCube(size=900.0, maptype="CROSS")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth = 1000.0
mapdepth = 1000.0
mapheight = 100.0
mymap = ElevationMap("textures/maze1.jpg",
width=mapwidth, depth=mapdepth, height=mapheight,
divx=128, divy=128, name="sub")
mymap.set_draw_details(shader, [rockimg1, rockimg2, shineimg], 128.0, 0.05)
# Create fog for more realistic fade in distance. This can be turned on and off between drawing different object (i.e backgound not foggy)
mymap.set_fog((0.1,0.1,0.1,1.0), 200.0)
#Create tree models
treeplane = Plane(w=4.0, h=5.0)
treemodel1 = MergeShape(name="baretree")
treemodel1.add(treeplane.buf[0], 0,0,0)
treemodel1.add(treeplane.buf[0], 0,0,0, 0,90,0)
#Scatter them on map using Merge shape's cluster function
mytrees1 = MergeShape(name="trees1")
ectex = texs.loadTexture("textures/ecubes/skybox_stormydays.jpg")
myecube = EnvironmentCube(900.0,"CROSS")
#ball
maxdsz = 0.3
radius = 1.0
ball = Sphere(radius,12,12,0.0,"sphere",-4,8,-7)
#monster
monster = Plane(5.0, 5.0, "monster", 0,0,0, 0,0,0)
# Create elevation map
mapwidth=50.0
mapdepth=50.0
maphalf=22.0
mapheight=40.0
#set smooth to give proper normals the bouncing won't work properly without and it doesn't look as good
mymap = ElevationMap("textures/pong.jpg",mapwidth,mapdepth,mapheight,32,32,4,"sub",0,0,0, smooth=True)
# lighting. The default light is a point light but I have made the position method capable of creating
# a directional light and this is what I do inside the loop. If you want a torch you don't need to move it about
light = Light(0, 2, 2, 1, "", 1,2,3, 0.1,0.1,0.2) #yellowish 'torch' or 'sun' with low level blueish ambient
light.position(1,2,3,0) # set to directional light by setting position with 0 fourth parameter
light.on()
#avatar camera
rot=0.0
tilt=0.0
avhgt = 2.0
xm=0.0
zm=0.0
ym=mapheight
lastX0=0.0
monstimg = texs.loadTexture("textures/piom3.jpg")
# environment cube
ectex = texs.loadTexture("textures/ecubes/skybox_stormydays.jpg")
myecube = EnvironmentCube(900.0,"CROSS")
#monster
radius = 1
ball = Sphere(radius,12,12,0.0,"sphere",-4,2,-7)
# Create elevation map
mapwidth=50.0
mapdepth=50.0
maphalf=23.0
mapheight=8
#set smooth to give proper normals
mymap = ElevationMap("textures/Piom1b.jpg",mapwidth,mapdepth,mapheight,64,64,128,"sub",0,0,0, smooth=True) ################### increased tiles to 32
# lighting. The default light is a point light but I have made the position method capable of creating
# a directional light and this is what I do inside the loop. If you want a torch you don't need to move it about
light = Light(0, 2, 2, 1, "", 1,2,3, 0.1,0.1,0.2) #yellowish 'torch' or 'sun' with low level blueish ambient
light.position(1,2,3,0) # set to directional light by settin position with 0 fourth parameter
light.on()
########## need to create instances of these before using them in the loop! #################
camera = Matrix() ####################
mykeys = Key() ####################
mymouse = Mouse() ####################
mymouse.start() ####################
omx=mymouse.x ####################
omy=mymouse.y ####################
texs = Textures()
tree2img = texs.loadTexture("textures/tree2.png")
tree1img = texs.loadTexture("textures/tree1.png")
grassimg = texs.loadTexture("textures/grass.png")
hb2img = texs.loadTexture("textures/hornbeam2.png")
#load environment cube
ectex = loadECfiles("textures/ecubes","sbox_interstellar",texs)
myecube = EnvironmentCube(900.0,"FACES")
# Create elevation map
mapwidth=1000.0
mapdepth=1000.0
mapheight=60.0
mountimg1 = texs.loadTexture("textures/mars_colour.png")
mymap = ElevationMap("textures/mars_height.png",mapwidth,mapdepth,mapheight,128,128) #testislands.jpg
#create robot
metalimg = texs.loadTexture("textures/metalhull.jpg")
robot_head= Sphere(2.0,12,12,0.5,"",0,3,0)
robot_body = Cylinder(2.0,4,12,"",0,1,0)
robot_leg = Cuboid(0.7,4.0,1.0,"",0,0.8,0)
robot = MergeShape()
robot.add(robot_head)
robot.add(robot_body)
robot.add(robot_leg, -2.1,0,0)
robot.add(robot_leg, 2.1,0,0)
#create space station
ssphere = Sphere(10,16,16)
# Load textures
reflcn = Texture("textures/stars.jpg")
#load environment cube
ectex = loadECfiles("textures/ecubes","sbox_interstellar")
myecube = EnvironmentCube(size=900.0, maptype="FACES")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth=1000.0
mapdepth=1000.0
mapheight=60.0
mountimg1 = Texture("textures/mars_colour.png")
bumpimg = Texture("textures/mudnormal.jpg")
mymap = ElevationMap(mapfile="textures/mars_height.png",
width=mapwidth, depth=mapdepth, height=mapheight,
divx=128, divy=128)
mymap.set_draw_details(shader,[mountimg1, bumpimg],128.0, 0.0)
mymap.set_fog((0.3,0.15,0.1,0.1), 300.0)
#create robot
metalimg = Texture("textures/metalhull.jpg")
robot_head= Sphere(radius=1.0)
robot_body = Cylinder(radius=1.0, height=2.0, sides=12)
robot_leg = Cuboid(w=0.35, h=2.0)
robot = MergeShape()
robot.add(robot_head.buf[0], 0.0, 1.6)
robot.add(robot_body.buf[0], 0.0, 0.5)
robot.add(robot_leg.buf[0], -1.04, 0, 0)
# Shape.set_draw_details is a wrapper for calling the method on each item in buf
# as is done explicitly here for no reason than to show that it can be done!
ball.buf[0].set_draw_details(shader,[ballimg], 0.0, 0.0)
#monster
monster = Plane(camera, light, 5.0, 5.0, "monster", 0,0,0, 0,0,0)
monster.buf[0].set_draw_details(flatsh, [monstimg])
# Create elevation map
mapwidth=50.0
mapdepth=50.0
maphalf=22.0
mapheight=40.0
mymap = ElevationMap("textures/pong.jpg", camera=camera, light=light,
width=mapwidth, depth=mapdepth, height=mapheight,
divx=32, divy=32, ntiles=4, name="sub")
mymap.buf[0].set_draw_details(shader, [groundimg, groundimg, ballimg], 1.0, 0.0)
#avatar camera
avhgt = 2.0
xm = 0.0
zm = 0.0
ym = 0.0
lastX0 = 0.0
lastZ0 = 0.0
camera.position((xm, 2 + ym, -maphalf - 2.5))
arialFont = Font("AR_CENA","#dd00aa") #load AR_CENA font and set the font colour to 'raspberry'
score = [0,0]
score0 = String(camera, light, arialFont, str(score[0]), 0, 12, 0, 0.05, 0.05)
reflcn = Texture("textures/stars.jpg")
#load environment cube
ectex = loadECfiles("textures/ecubes", "sbox_interstellar")
myecube = EnvironmentCube(size=900.0, maptype="FACES")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth = 1000.0
mapdepth = 1000.0
mapheight = 60.0
mountimg1 = Texture("textures/mars_colour.png")
bumpimg = Texture("textures/mudnormal.jpg")
mymap = ElevationMap(mapfile="textures/mars_height.png",
width=mapwidth,
depth=mapdepth,
height=mapheight,
divx=128,
divy=128)
mymap.set_draw_details(shader, [mountimg1, bumpimg], 128.0, 0.0)
mymap.set_fog((0.3, 0.15, 0.1, 0.1), 300.0)
#create robot
metalimg = Texture("textures/metalhull.jpg")
robot_head = Sphere(radius=1.0)
robot_body = Cylinder(radius=1.0, height=2.0, sides=12)
robot_leg = Cuboid(w=0.35, h=2.0)
robot = MergeShape()
robot.add(robot_head.buf[0], 0.0, 1.6)
robot.add(robot_body.buf[0], 0.0, 0.5)
robot.add(robot_leg.buf[0], -1.04, 0, 0)
blockimg = Texture("textures/squareblocks4.png")
roofedgeimg = Texture("textures/roofedging.png")
roofimg = Texture("textures/Roof.png")
greenimg = Texture("textures/squareblocks4green.png")
ectex = loadECfiles("textures/ecubes", "sbox", "jpg")
myecube = EnvironmentCube(size=900.0, maptype="FACES")
myecube.set_draw_details(flatsh, ectex)
# Create elevation map
mapwidth=1000.0
mapdepth=1000.0
mapheight=60.0
floorimg = Texture("textures/dunes3_512.jpg")
bumpimg = Texture("textures/mudnormal.jpg")
mymap = ElevationMap(mapfile="textures/mountainsHgt2.png",
width=mapwidth, depth=mapdepth, height=mapheight,
divx=64, divy=64)
mymap.set_draw_details(shader,[floorimg, bumpimg],128.0, 0.0)
mymap.set_fog((0.3,0.25,0.1,0.2), 500.0)
#Create some random block models elsewhere on the map!
corridor(150, 10, mymap, details = [shader, [blockimg, blockimg], 1.0, 0.0, 4.0, 4.0], walls="ns")
corridor(120, -40, mymap, details = [shader, [blockimg, blockimg], 1.0, 0.0, 4.0, 4.0], walls="ew")
# openSectionScheme: black is wall, white is corridor or room, grey has no ceiling, there is one model
# Model 0: wall
# Model 1: wall in the open
# Model 2: roof
# Model 3: roof edge
openSectionSchemeMultimodel = {"#models": 4,
(0,None) : [["R",2]], # black cell has a roof
# (this can be changed later to 'False' with 'rockimg2.blend = False')
rockimg1 = texs.loadTexture("textures/techy1.jpg")
rockimg2 = texs.loadTexture("textures/rock1.png", True)
tree2img = texs.loadTexture("textures/tree2.png")
raspimg = texs.loadTexture("textures/Raspi256x256.png")
monstimg = texs.loadTexture("textures/pong2.jpg")
# environment cube
ectex = texs.loadTexture("textures/ecubes/skybox_stormydays.jpg")
myecube = EnvironmentCube(900.0,"CROSS")
# Create elevation map
mapwidth=1000.0
mapdepth=1000.0
mapheight=100.0
mymap = ElevationMap("textures/maze1.jpg",mapwidth,mapdepth,mapheight,128,128,1,"sub",0,0,0, smooth=True)
mymap2 = ElevationMap("textures/maze1.jpg",mapwidth,mapdepth,mapheight+0.1,128,128 ,64,"detail",0.0, 0.01, 0.0, smooth=True)
# Crete fog for more realistic fade in distance. This can be turned on and off between drawing different object (i.e backgound not foggy)
myfog = Fog(0.02, (0.1,0.1,0.1,1.0))
#Create tree models
treeplane = Plane(4.0,5.0)
treemodel1 = MergeShape("baretree")
treemodel1.add(treeplane, 0,0,0)
treemodel1.add(treeplane, 0,0,0, 0,90,0)
shed = Model("models/shed1.obj",texs,"shed",0,3,0, 0,0,0, 2,2,2)
#Scatter them on map using Merge shape's cluster function
