def generate_unlinks(network,id_column):
network_filepath=network.dataProvider().dataSourceUri()
network_dir=os.path.dirname(network_filepath)
network_basename=QFileInfo(network_filepath).baseName()
output_path=network_dir + "/"+ network_basename +"_unlinks.shp"
processing.runandload("qgis:lineintersections", network, network,id_column,id_column,output_path)
Intersections = QgsVectorLayer(output_path,"Unlinks","ogr")
QgsMapLayerRegistry.instance().addMapLayer(Intersections)
mega_list=[]
for f in network.getFeatures():
Endpoints=f.geometry().asPolyline()
for i in Endpoints:
mega_list.append(i)
#delete points if they are endpoints of lines
#keep only unlinks
points_to_del=[]
for f in Intersections.getFeatures():
point=f.geometry().asPoint()
if point in mega_list:
points_to_del.append(f.id())
Intersections.startEditing()
Intersections.dataProvider().deleteFeatures(points_to_del)
Intersections.commitChanges()
def run_script(iface):
line = QgsVectorLayer('/home/zia/Documents/Test/QGIS_Python_Book/path/path.shp', 'Line', 'ogr')
QgsMapLayerRegistry.instance().addMapLayer(line)
# The following grass function cant be executed. But the same can be viewed from processing toolbox.
#processing.runandload('grass:v.to.points', line, '1000', False, False, True, '435727.015026, 458285.819185, 5566442.32879, 5591754.78979', -1, 0.0001, 0, None)
processing.runandload('qgis:randompointsinextent', '435727.015026, 458285.819185, 5566442.32879, 5591754.78979', 100, 100, None)
def FillHoles(self):
try:
processing.runandload('qgis:deleteholes', self.iface.activeLayer(), "memory: WeedingPlan")
except:
w = QWidget()
QMessageBox.warning(w, "Message", "Cannot dissolve selected layer!")
def calculateIntersection(self):
# use the buffer to cut from another layer
cutter = uf.getLegendLayerByName(self.iface, "Buffers")
# use the selected layer for cutting
layer = self.getSelectedLayer()
if cutter.featureCount() > 0:
# get the intersections between the two layers
intersection = processing.runandload('qgis:intersection', layer,
cutter, None)
intersection_layer = uf.getLegendLayerByName(
self.iface, "Intersection")
# prepare results layer
save_path = "%s/dissolve_results.shp" % QgsProject.instance(
).homePath()
# dissolve grouping by origin id
dissolve = processing.runandload('qgis:dissolve',
intersection_layer, False, 'id',
save_path)
dissolved_layer = uf.getLegendLayerByName(self.iface, "Dissolved")
dissolved_layer.setLayerName('Buffer Intersection')
# close intersections intermediary layer
QgsMapLayerRegistry.instance().removeMapLayers(
[intersection_layer.id()])
# add an 'area' field and calculate
# functiona can add more than one filed, therefore names and types are lists
uf.addFields(dissolved_layer, ["area"], [QtCore.QVariant.Double])
uf.updateField(dissolved_layer, "area", "$area")
def workerFinished(self, WeedingPlanLayer):
self.WaitWorker = self.WaitWorker +1
if WeedingPlanLayer is not None:
feature_list = WeedingPlanLayer.getFeatures()
Lista = []
for feat in feature_list:
Lista.append(feat)
self.WeedingPlanLayerProvider.addFeatures(Lista)
self.iface.messageBar().pushMessage('Weeding plan complete!')
else:
# notify the user that something went wrong
self.iface.messageBar().pushMessage('Weeding plan aborted!', level=QgsMessageBar.CRITICAL, duration=3)
#print self.WaitWorker
if self.WaitWorker == 4:
self.worker.deleteLater()
self.thread.quit()
self.thread.wait()
self.thread.deleteLater()
VectorLayerName = self.FieldcomboBox.itemData(self.FieldcomboBox.currentIndex())
VectorLayer = QgsMapLayerRegistry.instance().mapLayer(VectorLayerName)
self.WeedingPlanLayer.updateExtents()
QgsMapLayerRegistry.instance().addMapLayer(self.WeedingPlanLayer)
processing.runandload("qgis:clip",self.WeedingPlanLayer , VectorLayer, 'memory: WeedingPlanAreas')
QgsMapLayerRegistry.instance().removeMapLayer(self.WeedingPlanLayer.id())
del self.WeedingPlanLayer
del self.WeedingPlanLayerProvider
self.iface.messageBar().popWidget(self.messageBar)
def clipLayer(self):
inputlayer = uf.getLegendLayerByName(self.iface, "buildings")
cliplayer = uf.getLegendLayerByName(self.iface, "selected boundaries")
processing.runandload("qgis:clip", inputlayer, cliplayer, "memory:clippedlayer")
layer = QgsMapLayerRegistry.instance().mapLayersByName("memory:clippedlayer")[0]
toc = self.iface.legendInterface()
groups = toc.groups()
groupIndex = groups.index(u'working files')
toc.setLayerVisible(layer, True)
inputlayer2 = uf.getLegendLayerByName(self.iface, "green")
cliplayer = uf.getLegendLayerByName(self.iface, "selected boundaries")
processing.runandload("qgis:clip", inputlayer2, cliplayer, "memory:greenlayer")
layer2 = QgsMapLayerRegistry.instance().mapLayersByName("memory:greenlayer")[0]
toc = self.iface.legendInterface()
groups = toc.groups()
groupIndex = groups.index(u'working files')
# move layer to output folder
toc.moveLayer(layer, groupIndex)
toc.moveLayer(layer2, groupIndex)
toc.setLayerVisible(layer2, True)
vLayer = uf.getLegendLayerByName(self.iface, "selected boundaries")
canvas = self.iface.mapCanvas()
extent = vLayer.extent()
canvas.setExtent(extent)
mc = self.iface.mapCanvas()
for layer in mc.layers():
if layer.type() == layer.VectorLayer:
layer.removeSelection()
mc.refresh()
def clipLayer(self):
inputlayer = uf.getLegendLayerByName(self.iface, "buildings")
cliplayer = uf.getLegendLayerByName(self.iface, "selected boundaries")
processing.runandload("qgis:clip", inputlayer, cliplayer,
"memory:clippedlayer")
layer = QgsMapLayerRegistry.instance().mapLayersByName(
"memory:clippedlayer")[0]
toc = self.iface.legendInterface()
groups = toc.groups()
groupIndex = groups.index(u'working files')
toc.setLayerVisible(layer, True)
inputlayer2 = uf.getLegendLayerByName(self.iface, "green")
cliplayer = uf.getLegendLayerByName(self.iface, "selected boundaries")
processing.runandload("qgis:clip", inputlayer2, cliplayer,
"memory:greenlayer")
layer2 = QgsMapLayerRegistry.instance().mapLayersByName(
"memory:greenlayer")[0]
toc = self.iface.legendInterface()
groups = toc.groups()
groupIndex = groups.index(u'working files')
# move layer to output folder
toc.moveLayer(layer, groupIndex)
toc.moveLayer(layer2, groupIndex)
toc.setLayerVisible(layer2, True)
vLayer = uf.getLegendLayerByName(self.iface, "selected boundaries")
canvas = self.iface.mapCanvas()
extent = vLayer.extent()
canvas.setExtent(extent)
mc = self.iface.mapCanvas()
for layer in mc.layers():
if layer.type() == layer.VectorLayer:
layer.removeSelection()
mc.refresh()
def Dissolve(self):
try:
processing.runandload("qgis:dissolve",self.iface.activeLayer() , True,'', 'memory: WeedingPlan')
except:
w = QWidget()
QMessageBox.warning(w, "Message", "Can't dissolve selected layer!")
def inwijk(self):
layer = uf.getLegendLayerByName(self.iface, "Joined layer")
if layer:
QgsMapLayerRegistry.instance().removeMapLayers([layer])
processing.runandload(
'qgis:joinattributesbylocation', 'OneStartPoint', 'Wijk_Rott',
u'within', 0, 0, '', 0,
os.path.join(os.path.dirname(__file__), 'SampleData',
'Joined layer.shp'))
def calculateIntersection(self):
# use the buffer to cut from another layer
cutter = uf.getLegendLayerByName(self.iface, "Buffers")
# use the selected layer for cutting
layer = uf.getLegendLayerByName(self.iface, "green")
# get the intersections between the two layers
intersection = processing.runandload('qgis:intersection',layer,cutter,None)
intersection_layer = uf.getLegendLayerByName(self.iface, "Intersection")
# prepare results layer
save_path = "%s/dissolve_results.shp" % QgsProject.instance().homePath()
# dissolve grouping by origin id
dissolve = processing.runandload('qgis:dissolve',intersection_layer,False,'id',save_path)
dissolved_layer = uf.getLegendLayerByName(self.iface, "Dissolved")
# close intersections intermediary layer
""" QgsMapLayerRegistry.instance().removeMapLayers([intersection_layer.id()])"""
# add an 'area' field and calculate
# functiona can add more than one filed, therefore names and types are lists
wanted_layer = uf.getLegendLayerByName(self.iface, "Buffers")
dissolved_layer = uf.getLegendLayerByName(self.iface, "Dissolved")
uf.addFields(dissolved_layer,["green_area"], [QtCore.QVariant.Double])
uf.updateField(dissolved_layer, "green_area","$area")
dissolved_layer.updateFields()
save_path = "%s/dissolve_results.shp" % QgsProject.instance().homePath()
shp = uf.getLegendLayerByName(self.iface, "Buffers")
csv = uf.getLegendLayerByName(self.iface, "Dissolved")
# Set properties for the join
shpField='id'
csvField='id'
joinObject = QgsVectorJoinInfo()
joinObject.joinLayerId = csv.id()
joinObject.joinFieldName = csvField
joinObject.targetFieldName = shpField
joinObject.memoryCache = True
shp.addJoin(joinObject)
# add an 'total_area' field and calculate
straal = float(self.bufferLineEdit.text())
uf.addFields(wanted_layer, ["total_area"], [QtCore.QVariant.Double])
uf.updateField(wanted_layer, "total_area"," 3.14159265359 * ((%d)^2)" % straal )
# add an 'percentage_green' field and calculate
uf.addFields(wanted_layer, ["green_perc"], [QtCore.QVariant.Double])
uf.updateField(wanted_layer, "green_perc","(%s /%s)* 100" % ('Dissolved_green_area', 'total_area'))
layer1 = QgsMapLayerRegistry.instance().mapLayersByName("Buffers")[0]
layer2 = QgsMapLayerRegistry.instance().mapLayersByName("Intersection")[0]
layer3 = QgsMapLayerRegistry.instance().mapLayersByName("Dissolved")[0]
toc = self.iface.legendInterface()
groups = toc.groups()
groupIndex2 = groups.index(u'output')
groupIndex = groups.index(u'working files')
# move layer to output folder
toc.moveLayer(layer1, groupIndex2)
toc.moveLayer(layer2, groupIndex)
toc.moveLayer(layer3, groupIndex)
def count_hazard_level_per_barangay(self, infraWithHazard, brgy, brgyNames, hazardType):
names0 = []
brgyDict = {}
processing.runandload("qgis:joinattributesbylocation", infraWithHazard, brgy, u"intersects", 0.00000, 0, "mean", 1, "memory:")
out1 = QgsMapLayerRegistry.instance().mapLayersByName("Joined layer")[0]
brgyNameIndex = out1.fieldNameIndex(brgyNames)
hazardTypeIndex = out1.fieldNameIndex(hazardType)
features = out1.getFeatures()
for f in features:
try:
attr = f.attributes()
names0.append(str(attr[brgyNameIndex]))
except IndexError:
pass
names = list(set(names0))
for n in names:
brgyDict[n] = [0,0,0]
features2 = out1.getFeatures()
for f in features2:
try:
attr = f.attributes()
brgyName = str(attr[brgyNameIndex])
hazardLevel = str(attr[hazardTypeIndex])
if hazardLevel.capitalize() == "Low":
brgyDict[brgyName][0] += 1
elif hazardLevel.capitalize() == "Medium":
brgyDict[brgyName][1] += 1
elif hazardLevel.capitalize() == "High":
brgyDict[brgyName][2] += 1
except IndexError:
pass
#toRemove = QgsMapLayerRegistry.instance().mapLayersByName("Joined layer")[0]
QgsMapLayerRegistry.instance().removeMapLayers([out1.id()])
return brgyDict
def calculateRoute(self):
# origin and destination must be in the set of tied_points
options = len(self.tied_points)
if options > 1:
# origin and destination are given as an index in the tied_points list
origin = 0
destination = random.randint(1, options - 1)
# calculate the shortest path for the given origin and destination
path = uf.calculateRouteDijkstra(self.graph, self.tied_points,
origin, destination)
# store the route results in temporary layer called "Routes"
routes_layer = uf.getLegendLayerByName(self.iface, "Routes")
# create one if it doesn't exist
if not routes_layer:
attribs = ['id']
types = [QtCore.QVariant.String]
routes_layer = uf.createTempLayer(
'Routes', 'LINESTRING',
self.network_layer.crs().postgisSrid(), attribs, types)
uf.loadTempLayer(routes_layer)
# insert route line
for route in routes_layer.getFeatures():
print route.id()
uf.insertTempFeatures(routes_layer, [path], [['testing', 100.00]])
buffer = processing.runandload('qgis:fixeddistancebuffer',
routes_layer, 10.0, 5, False, None)
def calculateIntersection(self):
# use the buffer to cut from another layer
cutter = uf.getLegendLayerByName(self.iface, "Buffers")
# use the selected layer for cutting
layer = self.getSelectedLayer()
if cutter.featureCount() > 0:
# get the intersections between the two layers
intersection = processing.runandload('qgis:intersection',layer,cutter,None)
intersection_layer = uf.getLegendLayerByName(self.iface, "Intersection")
# prepare results layer
save_path = "%s/dissolve_results.shp" % QgsProject.instance().homePath()
# dissolve grouping by origin id
dissolve = processing.runandload('qgis:dissolve',intersection_layer,False,'id',save_path)
dissolved_layer = uf.getLegendLayerByName(self.iface, "Dissolved")
# close intersections intermediary layer
QgsMapLayerRegistry.instance().removeMapLayers([intersection_layer.id()])
# add an 'area' field and calculate
# functiona can add more than one filed, therefore names and types are lists
uf.addFields(dissolved_layer, ["area"], [QtCore.QVariant.Double])
uf.updateField(dissolved_layer, "area","$area")
def topology_check(self, directory, lyr1, lyr2, campo1, campo2, nome1,
nome2, nome3, e):
processing.runandload("saga:polygonselfintersection", lyr1, campo1,
directory + os.sep + nome1 + ".shp")
self.elab_self_intersect(nome1, campo1)
self.remove_record(nome1)
e.write(
" Eseguito! Il file contenente le aree di self-intersection del layer '"
+ lyr1 + "' e' stato salvato nella directory '\\elab\\" + nome1 +
".shp'\n")
processing.runandload("saga:polygonselfintersection", lyr2, campo2,
directory + os.sep + nome2 + ".shp")
self.elab_self_intersect(nome2, campo2)
self.remove_record(nome2)
e.write(
" Eseguito! Il file contenente le aree di self-intersection del layer '"
+ lyr2 + "' e' stato salvato nella directory '\\elab\\" + nome2 +
".shp'\n")
processing.runandload("saga:intersect", lyr1, lyr2, True,
directory + os.sep + nome3 + ".shp")
self.elab_intersect(nome3)
self.remove_record(nome3)
e.write(
" Eseguito! Il file contenente le aree di intersezione tra '" +
lyr1 + "' e '" + lyr2 +
"' e' stato salvato nella directory '\\elab\\" + nome3 +
".shp'\n\n")
def calculateRoute(self):
# origin and destination must be in the set of tied_points
options = len(self.tied_points)
if options > 1:
# origin and destination are given as an index in the tied_points list
origin = 0
destination = random.randint(1,options-1)
# calculate the shortest path for the given origin and destination
path = uf.calculateRouteDijkstra(self.graph, self.tied_points, origin, destination)
# store the route results in temporary layer called "Routes"
routes_layer = uf.getLegendLayerByName(self.iface, "Routes")
# create one if it doesn't exist
if not routes_layer:
attribs = ['id']
types = [QtCore.QVariant.String]
routes_layer = uf.createTempLayer('Routes','LINESTRING',self.network_layer.crs().postgisSrid(), attribs, types)
uf.loadTempLayer(routes_layer)
# insert route line
for route in routes_layer.getFeatures():
print route.id()
uf.insertTempFeatures(routes_layer, [path], [['testing',100.00]])
buffer = processing.runandload('qgis:fixeddistancebuffer',routes_layer,10.0,5,False,None)
def topology_check(self, directory, lyr1, lyr2, campo1, campo2, nome1,
nome2, nome3, f, e):
processing.runandload("saga:polygonselfintersection", lyr1, campo1,
directory + os.sep + nome1 + ".shp")
self.elab_self_intersect(nome1)
self.remove_record(nome1)
f.write(
" Fatto! Il file contenente le auto-intersezioni del layer '" +
lyr1 +
"' e' stato salvato nella directory '\\allegati\\log\\analisi\\" +
nome1 + ".shp'\n")
e.write(" Done! File containing auto-intersections of '" + lyr1 +
"' layer has been saved in '\\allegati\\log\\analisi\\" +
nome1 + ".shp'\n")
processing.runandload("saga:polygonselfintersection", lyr2, campo2,
directory + os.sep + nome2 + ".shp")
self.elab_self_intersect(nome2)
self.remove_record(nome2)
f.write(
" Fatto! Il file contenente le auto-intersezioni del layer '" +
lyr2 +
"' e' stato salvato nella directory '\\allegati\\log\\analisi\\" +
nome2 + ".shp'\n")
e.write(" Done! File containing auto-intersections of '" + lyr2 +
"' layer has been saved in '\\allegati\\log\\analisi\\" +
nome2 + ".shp'\n")
processing.runandload("saga:intersect", lyr1, lyr2, True,
directory + os.sep + nome3 + ".shp")
self.elab_intersect(nome3)
self.remove_record(nome3)
f.write(
" Fatto! Il file contenente le intersezioni tra i layer '" + lyr1 +
"' e '" + lyr2 +
"' e' stato salvato nella directory '\\allegati\\log\\analisi\\" +
nome3 + ".shp'\n\n")
e.write(" Done! File containing intersections between '" + lyr1 +
"' and '" + lyr2 +
"' layers was saved in '\\allegati\\log\\analisi\\" + nome3 +
".shp'\n\n")
def identify_gap(self, e, lyr, dir_out):
if lyr.wkbType() == QGis.WKBPolygon and lyr.name(
) != 'comune_progetto' or lyr.wkbType(
) == QGis.WKBMultiPolygon and lyr.name() != 'comune_progetto':
if lyr.featureCount() > 0:
e.write(
" - Sto eseguendo il controllo relativo alla presenza di gap su '"
+ lyr.name() + "'...\n")
output1 = dir_out + os.sep + "elab" + os.sep + lyr.name(
) + "_diss.shp"
output2 = dir_out + os.sep + "elab" + os.sep + lyr.name(
) + "_fill.shp"
output3 = dir_out + os.sep + "elab" + os.sep + lyr.name(
) + "_gap.shp"
processing.runandload("qgis:dissolve", lyr, True, "", output1)
processing.runandload("qgis:fillholes", output1, 1, output2)
processing.runandload("qgis:difference", output2, output1,
False, output3)
try:
layer_name = QgsMapLayerRegistry.instance(
).mapLayersByName("Difference")[0]
except:
layer_name = QgsMapLayerRegistry.instance(
).mapLayersByName("Differenza")[0]
layer_name.setLayerName(lyr.name() + "_gap")
layer_name.startEditing()
for fc in layer_name.getFeatures(
QgsFeatureRequest().setFilterExpression(
"$geometry IS NULL").setSubsetOfAttributes(
[]).setFlags(QgsFeatureRequest.NoGeometry)):
layer_name.deleteFeature(fc.id())
layer_name.commitChanges()
e.write(" Eseguito! Il file contenente i gap del layer '" +
lyr.name() +
"' e' stato salvato nella directory '\\elab\\" +
lyr.name() + "_gap.shp'\n\n")
def test_runandload(self):
processing.runandload("qgis:countpointsinpolygon", polygons(),
points(), "NUMPOINTS", None)
layer = getfromname("Result")
self.assertIsNotNone(layer)
def calculateIntersection(self):
# use the buffer to cut from another layer
cutter = uf.getLegendLayerByName(self.iface, "Buffers")
# use the selected layer for cutting
layer = uf.getLegendLayerByName(self.iface, "green")
# get the intersections between the two layers
intersection = processing.runandload('qgis:intersection', layer,
cutter, None)
intersection_layer = uf.getLegendLayerByName(self.iface,
"Intersection")
# prepare results layer
save_path = "%s/dissolve_results.shp" % QgsProject.instance().homePath(
)
# dissolve grouping by origin id
dissolve = processing.runandload('qgis:dissolve', intersection_layer,
False, 'id', save_path)
dissolved_layer = uf.getLegendLayerByName(self.iface, "Dissolved")
# close intersections intermediary layer
""" QgsMapLayerRegistry.instance().removeMapLayers([intersection_layer.id()])"""
# add an 'area' field and calculate
# functiona can add more than one filed, therefore names and types are lists
wanted_layer = uf.getLegendLayerByName(self.iface, "Buffers")
dissolved_layer = uf.getLegendLayerByName(self.iface, "Dissolved")
uf.addFields(dissolved_layer, ["green_area"], [QtCore.QVariant.Double])
uf.updateField(dissolved_layer, "green_area", "$area")
dissolved_layer.updateFields()
save_path = "%s/dissolve_results.shp" % QgsProject.instance().homePath(
)
shp = uf.getLegendLayerByName(self.iface, "Buffers")
csv = uf.getLegendLayerByName(self.iface, "Dissolved")
# Set properties for the join
shpField = 'id'
csvField = 'id'
joinObject = QgsVectorJoinInfo()
joinObject.joinLayerId = csv.id()
joinObject.joinFieldName = csvField
joinObject.targetFieldName = shpField
joinObject.memoryCache = True
shp.addJoin(joinObject)
# add an 'total_area' field and calculate
straal = float(self.bufferLineEdit.text())
uf.addFields(wanted_layer, ["total_area"], [QtCore.QVariant.Double])
uf.updateField(wanted_layer, "total_area",
" 3.14159265359 * ((%d)^2)" % straal)
# add an 'percentage_green' field and calculate
uf.addFields(wanted_layer, ["green_perc"], [QtCore.QVariant.Double])
uf.updateField(
wanted_layer, "green_perc",
"(%s /%s)* 100" % ('Dissolved_green_area', 'total_area'))
layer1 = QgsMapLayerRegistry.instance().mapLayersByName("Buffers")[0]
layer2 = QgsMapLayerRegistry.instance().mapLayersByName(
"Intersection")[0]
layer3 = QgsMapLayerRegistry.instance().mapLayersByName("Dissolved")[0]
toc = self.iface.legendInterface()
groups = toc.groups()
groupIndex2 = groups.index(u'output')
groupIndex = groups.index(u'working files')
# move layer to output folder
toc.moveLayer(layer1, groupIndex2)
toc.moveLayer(layer2, groupIndex)
toc.moveLayer(layer3, groupIndex)
def run(self):
"""Run method that performs all the real work"""
# show the dialog
self.dlg.show()
# Run the dialog event loop
result = self.dlg.exec_()
# See if OK was pressed
if result:
# Do something useful here - delete the line containing pass and
# substitute with your code.
#-----clear
cLayer = iface.mapCanvas().currentLayer()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
cLayer = iface.mapCanvas().currentLayer()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
line_Dxf = self.dlg.lineEdit.text()
db = os.path.expanduser(
'~\\.qgis2\\python\\plugins\\ParcelChecker\\qgis.dbf')
outputs_QGISEXPLODELINES_1 = processing.runalg(
'qgis:explodelines', line_Dxf, None)
outputs_GRASS7VCLEAN_1 = processing.runalg(
'grass7:v.clean', outputs_QGISEXPLODELINES_1['OUTPUT'], 1,
0.001, ('0,2000,0,2000'), -1.0, 0.0001, None, None)
outputs_GRASS7VCLEAN_2 = processing.runalg(
'grass7:v.clean', outputs_GRASS7VCLEAN_1['output'], 0, 0.001,
('0,2000,0,2000'), -1.0, 0.0001, None, None)
outputs_QGISFIELDCALCULATOR_1 = processing.runalg(
'qgis:fieldcalculator', outputs_GRASS7VCLEAN_2['output'], 'ex',
0, 10.0, 4.0, True, '$length', None)
outputs_QGISJOINATTRIBUTESTABLE_1 = processing.runandload(
'qgis:joinattributestable',
outputs_QGISFIELDCALCULATOR_1['OUTPUT_LAYER'], db, 'layer',
'layer', None)
#---- ---------------iface activity--------------------------------------
cLayer = iface.mapCanvas().currentLayer()
expr = QgsExpression("ex=0")
it = cLayer.getFeatures(QgsFeatureRequest(expr))
ids = [i.id() for i in it]
cLayer.setSelectedFeatures(ids)
cLayer.startEditing()
for fid in ids:
cLayer.deleteFeature(fid)
cLayer.commitChanges()
#---- ---------------iface activity 02--------------------------------------
cLayer = iface.mapCanvas().currentLayer()
expr = QgsExpression(" \"layer_2\" is NULL")
it = cLayer.getFeatures(QgsFeatureRequest(expr))
ids = [i.id() for i in it]
cLayer.setSelectedFeatures(ids)
cLayer.startEditing()
for fid in ids:
cLayer.deleteFeature(fid)
cLayer.commitChanges()
#------------------
cLayer = iface.mapCanvas().currentLayer()
layer = self.iface.activeLayer()
myfilepath = iface.activeLayer().dataProvider().dataSourceUri()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
layer = QgsVectorLayer(myfilepath, os.path.basename(line_Dxf[:-4]),
'ogr')
QgsMapLayerRegistry.instance().addMapLayer(layer)
cLayer = iface.mapCanvas().currentLayer()
outputs_QGISPOLYGONIZE_1 = processing.runalg(
'qgis:polygonize', cLayer, False, True, None)
outputs_QGISPOINTONSURFACE_1 = processing.runandload(
'qgis:pointonsurface', line_Dxf, None)
cLayer = iface.mapCanvas().currentLayer()
expr = QgsExpression(" \"Layer\" is not 'LOTNO'")
it = cLayer.getFeatures(QgsFeatureRequest(expr))
ids = [i.id() for i in it]
cLayer.setSelectedFeatures(ids)
cLayer.startEditing()
for fid in ids:
cLayer.deleteFeature(fid)
cLayer.commitChanges()
outputs_QGISJOINATTRIBUTESBYLOCATION_1 = processing.runandload(
'qgis:joinattributesbylocation',
outputs_QGISPOLYGONIZE_1['OUTPUT'], cLayer, ['contains'], 0.0,
0, 'sum,mean,min,max,median', 1, None)
b = r"" + line_Dxf[:-4] + "Report01.txt"
file = open(b, 'w')
cLayer = iface.mapCanvas().currentLayer()
#------------------------------------------------------------------------
cLayer = iface.mapCanvas().currentLayer()
layer = self.iface.activeLayer()
myfilepath = iface.activeLayer().dataProvider().dataSourceUri()
outputs_QGISDISSOLVE_2 = processing.runandload(
'qgis:dissolve', cLayer, False, 'Text', None)
layer = self.iface.activeLayer()
myfilepath2 = iface.activeLayer().dataProvider().dataSourceUri()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
outputs_QGISDISSOLVE_3 = processing.runandload(
'qgis:dissolve', myfilepath, False, 'Text', None)
#---- ---------------iface activity 03--------------------------------------
cLayer = iface.mapCanvas().currentLayer()
expr = QgsExpression(" \"Layer\" is NULL")
it = cLayer.getFeatures(QgsFeatureRequest(expr))
ids = [i.id() for i in it]
cLayer.setSelectedFeatures(ids)
cLayer.startEditing()
for fid in ids:
cLayer.deleteFeature(fid)
cLayer.commitChanges()
feats_count = cLayer.featureCount()
file.write('----------Processed result of the plan--------"\n')
file.write('\nNo of Lots ')
file.write(str(feats_count))
#-----------------------------------------------------------------------------------------
cLayer = iface.mapCanvas().currentLayer()
layer = self.iface.activeLayer()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
cLayer = iface.mapCanvas().currentLayer()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
cLayer = iface.mapCanvas().currentLayer()
QgsMapLayerRegistry.instance().removeMapLayer(cLayer)
layer = QgsVectorLayer(myfilepath, os.path.basename(line_Dxf[:-4]),
'ogr')
QgsMapLayerRegistry.instance().addMapLayer(layer)
#---- ---------------iface activity 05--------------------------------------
cLayer = iface.mapCanvas().currentLayer()
expr = QgsExpression(" \"area\" is 0")
it = cLayer.getFeatures(QgsFeatureRequest(expr))
ids = [i.id() for i in it]
cLayer.setSelectedFeatures(ids)
cLayer.startEditing()
for fid in ids:
cLayer.deleteFeature(fid)
cLayer.commitChanges()
count1 = cLayer.featureCount()
file.write('\nNo of Polygons ')
file.write(str(count1))
expr = QgsExpression(" \"Text\" is NULL")
it = cLayer.getFeatures(QgsFeatureRequest(expr))
ids = [i.id() for i in it]
cLayer.setSelectedFeatures(ids)
count2 = len(ids)
file.write('\nNo of Polygons unloted ')
file.write(str(count2))
if str(count1 < count2):
file.write(
'\nplease numbered the unloted lots and re do the processed '
)
now = datetime.datetime.now()
date = str(now)
a1 = str(now.strftime("%Y-%m-%d"))
file.write("\nDate : " + a1 + "\n")
file.write(
'\n------------------------- R&D @ SGO ------------------------'
)
file.close()
layer = iface.activeLayer()
layer.setCustomProperty("labeling", "pal")
layer.setCustomProperty("labeling/enabled", "true")
layer.setCustomProperty("labeling/fontFamily", "Arial")
layer.setCustomProperty("labeling/fontSize", "10")
layer.setCustomProperty("labeling/fieldName", "Text")
layer.setCustomProperty("labeling/placement", "4")
iface.mapCanvas().refresh()
from PyQt4.QtGui import *
window = iface.mainWindow()
QMessageBox.information(
window, "Info",
"Process complete....!\n \n (if unloted polygon exist, dont goto the next step)"
)
pass
def controllo(self):
self.help_button.clicked.connect(lambda: webbrowser.open(
'https://www.youtube.com/watch?v=zv25F_apEMM&t=3s'))
DIZIO_LYR = {
"Siti puntuali": {
u'pkuid': 'integer',
u'ubicazione_prov': 'text',
u'ubicazione_com': 'text',
u'id_spu': 'text',
u'indirizzo': 'text',
u'coord_x': 'real',
u'coord_y': 'real',
u'mod_identcoord': 'text',
u'desc_modcoord': 'text',
u'quota_slm': 'real',
u'modo_quota': 'text',
u'data_sito': 'text',
u'note_sito': 'text'
},
"Siti lineari": {
u'pkuid': 'integer',
u'ubicazione_prov': 'text',
u'ubicazione_com': 'text',
u'id_sln': 'text',
u'acoord_x': 'real',
u'acoord_y': 'real',
u'bcoord_x': 'real',
u'bcoord_y': 'real',
u'mod_identcoord': 'text',
u'desc_modcoord': 'text',
u'aquota': 'real',
u'bquota': 'real',
u'data_sito': 'text',
u'note_sito': 'text'
},
"Elementi geologici e idrogeologici puntuali": {
u'pkuid': 'integer',
u'Tipo_gi': 'text',
u'Valore': 'real',
u'Valore2': 'real',
u'ID_gi': 'integer'
},
"Elementi puntuali": {
u'pkuid': 'integer',
u'Tipo_ep': 'integer',
u'ID_ep': 'integer'
},
"Elementi lineari": {
u'pkuid': 'integer',
u'Tipo_el': 'integer',
u'ID_el': 'integer'
},
"Forme": {
u'pkuid': 'integer',
u'Tipo_f': 'integer',
u'ID_f': 'integer'
},
"Unita' geologico-tecniche": {
u'pkuid': 'integer',
u'Tipo_gt': 'text',
u'Stato': 'integer',
u'Gen': 'text',
u'Tipo_geo': 'text',
u'ID_gt': 'integer'
},
"Instabilita' di versante": {
u'pkuid': 'integer',
u'Tipo_i': 'integer',
u'FRT': 'real',
u'FRR': 'real',
u'IL': 'real',
u'DISL': 'real',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_i': 'integer',
u'AMB': 'text'
},
"Isobate liv 1": {
u'pkuid': 'integer',
u'Quota': 'real',
u'ID_isosub': 'integer'
},
"Zone stabili liv 1": {
u'pkuid': 'integer',
u'Tipo_z': 'integer',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_z': 'integer'
},
"Zone instabili liv 1": {
u'pkuid': 'integer',
u'Tipo_i': 'integer',
u'FRT': 'real',
u'FRR': 'real',
u'IL': 'real',
u'DISL': 'real',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_i': 'integer',
u'AMB': 'text'
},
"Isobate liv 2": {
u'pkuid': 'integer',
u'Quota': 'real',
u'ID_isosub': 'integer'
},
"Zone stabili liv 2": {
u'pkuid': 'integer',
u'Tipo_z': 'integer',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_z': 'integer'
},
"Zone instabili liv 2": {
u'pkuid': 'integer',
u'Tipo_i': 'integer',
u'FRT': 'real',
u'FRR': 'real',
u'IL': 'real',
u'DISL': 'real',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_i': 'integer',
u'AMB': 'text'
},
"Isobate liv 3": {
u'pkuid': 'integer',
u'Quota': 'real',
u'ID_isosub': 'integer'
},
"Zone stabili liv 3": {
u'pkuid': 'integer',
u'Tipo_z': 'integer',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_z': 'integer'
},
"Zone instabili liv 3": {
u'pkuid': 'integer',
u'Tipo_i': 'integer',
u'FRT': 'real',
u'FRR': 'real',
u'IL': 'real',
u'DISL': 'real',
u'FA': 'real',
u'FV': 'real',
u'Ft': 'real',
u'FH0105': 'real',
u'FH0510': 'real',
u'FH0515': 'real',
u'FPGA': 'real',
u'FA0105': 'real',
u'FA0408': 'real',
u'FA0711': 'real',
u'SPETTRI': 'text',
u'LIVELLO': 'integer',
u'CAT': 'text',
u'ID_i': 'integer',
u'AMB': 'text'
}
}
SHP_VALIDATORE = [
"geotec_self_inters", "stab_1_self_inters", "instab_1_self_inters",
"ms1_inters_stab_instab", "stab_2_self_inters",
"instab_2_self_inters", "ms2_inters_stab_instab",
"stab_3_self_inters", "instab_3_self_inters",
"ms3_inters_stab_instab"
]
dir_progetto = QgsProject.instance().fileName()
indagini_punti = True
indagini_linee = True
intersezioni_geotec = True
intersezioni_ms1 = True
intersezioni_ms2 = True
intersezioni_ms3 = True
self.disableButton()
self.show()
result = self.exec_()
if result:
try:
dict_layer = {}
pathname = QgsProject.instance().readPath(
"./") + os.sep + "allegati" + os.sep + "log"
logfile_ita = pathname + os.sep + str(
time.strftime("%Y-%m-%d_%H-%M-%S",
time.gmtime())) + "_log_controllo.txt"
logfile_eng = pathname + os.sep + str(
time.strftime("%Y-%m-%d_%H-%M-%S",
time.gmtime())) + "_validation_log.txt"
f = open(logfile_ita, 'a')
e = open(logfile_eng, 'a')
f.write("REPORT DI CONTROLLO E VALIDAZIONE:" +
"\n----------------------------------\n\n")
e.write("VALIDATION SUMMARY REPORT:" +
"\n------------------------------\n\n")
if os.path.exists(pathname + os.sep + "analisi"):
shutil.rmtree(pathname + os.sep + "analisi")
os.makedirs(pathname + os.sep + "analisi")
else:
os.makedirs(pathname + os.sep + "analisi")
f.write("1) Controllo dei layer di progetto:\n")
e.write("1) Presence of project layers:\n")
root = QgsProject.instance().layerTreeRoot()
added = self.checkLayers(root, dict_layer, DIZIO_LYR)
if len(added) == 0:
f.write(
" I layer fondamentali del progetto sono tutti presenti!"
)
e.write(" The project layers are all present!")
else:
f.write(" Mancano i seguenti layer:\n")
e.write(" The following layers are missing:\n")
for x in added:
f.write(" - " + x + "\n")
e.write(" - " + x + "\n")
if "Siti puntuali" in added or "Indagini puntuali" in added or "Parametri puntuali" in added or "Curve di riferimento" in added:
indagini_punti = False
if "Siti lineari" in added or "Indagini lineari" in added or "Parametri lineari" in added:
indagini_linee = False
if "Unita' geologico-tecniche" in added:
intersezioni_geotec = False
if "Zone stabili liv 1" in added or "Zone instabili liv 1" in added:
intersezioni_ms1 = False
if "Zone stabili liv 2" in added or "Zone instabili liv 2" in added:
intersezioni_ms2 = False
if "Zone stabili liv 3" in added or "Zone instabili liv 3" in added:
intersezioni_ms3 = False
f.write("\n\n2) Controllo geometrico:\n")
e.write("\n\n2) Geometric control:\n")
for nome in constants.LISTA_LAYER:
if nome in [
"Indagini puntuali", "Parametri puntuali",
"Curve di riferimento", "Indagini lineari",
"Parametri lineari"
]:
pass
else:
f.write(
" Sto eseguendo il controllo geometrico del layer '"
+ nome + "'\n")
e.write(
" I am performing geometric validation of the '"
+ nome + "' layer\n")
features = QgsMapLayerRegistry.instance(
).mapLayersByName(nome)[0]
for feature in features.getFeatures():
geom = feature.geometry()
if geom:
err = geom.validateGeometry()
if err:
f.write(
' %d individuato errore geometrico (feature %d)\n'
% (len(err), feature.id()))
e.write(
' %d identified geometric error (feature %d)\n'
% (len(err), feature.id()))
f.write(" Ho terminato l'analisi del layer '" +
nome + "'\n\n")
e.write(" I finished the analysis of the layer '" +
nome + "'\n\n")
f.write("3) Controllo topologico:\n")
e.write("3) Topological control:\n")
f.write(
" Sto eseguendo il controllo topologico per il livello 'Carta Geotecnica'...\n"
)
e.write(
" I am performing topological validation of 'Carta Geotecnica' level...\n"
)
if intersezioni_geotec is True:
processing.runandload(
"saga:polygonselfintersection",
"Unita' geologico-tecniche", "ID_gt", pathname +
os.sep + "analisi" + os.sep + "geotec_self_inters.shp")
self.elab_self_intersect("geotec_self_inters")
self.remove_record("geotec_self_inters")
f.write(
" Fatto! Il file contenente le auto-intersezioni del layer 'Unita' geologico-tecniche' e' stato salvato nella directory '\\allegati\\log\\analisi\\geotec_self_inters.shp'\n\n"
)
e.write(
" Done! File containing auto-intersections of 'Unita' geologico-tecniche' layer has been saved in '\\allegati\\log\\analisi\\geotec_self_inters.shp'\n\n"
)
else:
f.write(
" Non e' possibile eseguire il controllo topologico in quanto manca/mancano uno o piu' layer!\n\n"
)
e.write(
" Topological validation can not be performed because one or more layers is/are missing!\n\n"
)
f.write(
" Sto eseguendo il controllo topologico per il livello 'MS1'...\n"
)
e.write(
" I am performing topological validation of the 'MS1' level...\n"
)
if intersezioni_ms1 is True:
self.topology_check(pathname + os.sep + "analisi",
"Zone stabili liv 1",
"Zone instabili liv 1", "ID_z", "ID_i",
"stab_1_self_inters",
"instab_1_self_inters",
"ms1_inters_stab_instab", f, e)
else:
f.write(
" Non e' possibile eseguire il controllo topologico in quanto manca/mancano uno o piu' layer!\n\n"
)
e.write(
" Topological validation can not be performed because one or more layers is/are missing!\n\n"
)
f.write(
" Sto eseguendo il controllo topologico per il livello 'MS2'...\n"
)
e.write(
" I am performing topological validation of the 'MS2' level...\n"
)
if intersezioni_ms2 is True:
self.topology_check(pathname + os.sep + "analisi",
"Zone stabili liv 2",
"Zone instabili liv 2", "ID_z", "ID_i",
"stab_2_self_inters",
"instab_2_self_inters",
"ms2_inters_stab_instab", f, e)
else:
f.write(
" Non e' possibile eseguire il controllo topologico in quanto manca/mancano uno o piu' layer!\n\n"
)
e.write(
" Topological validation can not be performed because one or more layers is/are missing!\n\n"
)
f.write(
" Sto eseguendo il controllo topologico per il livello 'MS3'...\n"
)
e.write(
" I am performing topological validation of the 'MS3' level...\n"
)
if intersezioni_ms3 is True:
self.topology_check(pathname + os.sep + "analisi",
"Zone stabili liv 3",
"Zone instabili liv 3", "ID_z", "ID_i",
"stab_3_self_inters",
"instab_3_self_inters",
"ms3_inters_stab_instab", f, e)
else:
f.write(
" Non e' possibile eseguire il controllo topologico in quanto manca/mancano uno o piu' layer!\n\n"
)
e.write(
" Topological validation can not be performed because one or more layers is/are missing!\n\n"
)
f.write("\nAnalisi terminata!")
e.write("\nAnalysis completed!")
QMessageBox.information(
None, u'INFORMATION!',
u"Validation summary report was saved in the project folder '...\\allegati\\log'"
)
for layer in iface.mapCanvas().layers():
if layer.name() in SHP_VALIDATORE:
feats_count = layer.featureCount()
if feats_count == 0:
QgsMapLayerRegistry.instance().removeMapLayer(
layer)
root = QgsProject.instance().layerTreeRoot()
root.addGroup("Validazione")
toc = iface.legendInterface()
groups = toc.groups()
groupIndex = groups.index("Validazione")
canvas = iface.mapCanvas()
layers = canvas.layers()
for i in layers:
if i.name() in SHP_VALIDATORE:
alayer = i
toc.moveLayer(i, groupIndex)
canvas.refresh()
except IOError:
QMessageBox.warning(
None, u'WARNING!',
u"Open a Seismic Microzonation project before starting this tool!"
)
except Exception as z:
QMessageBox.critical(None, u'ERROR!',
u'Error:\n"' + str(z) + '"')
def run(self):
"""Run method that performs all the real work"""
# show the dialog
self.dlg.show()
# Clear all input line
self.dlg.Contour_Layer.clear()
self.dlg.River_Layer.clear()
self.dlg.Contour_Elev_Field.clear()
self.dlg.Output_Directory.clear()
# Load all active layers
layers = self.iface.legendInterface().layers()
idx = 0
for layer in layers:
try:
layer.wkbType()
if layer.wkbType() == 2:
self.layers_dict.update({idx: layer})
self.dlg.Contour_Layer.addItem(layer.name(), layer)
self.dlg.River_Layer.addItem(layer.name(), layer)
idx += 1
except:
pass
# Run the dialog event loop
result = self.dlg.exec_()
# See if OK was pressed
if result:
# Do something useful here - delete the line containing pass and
# substitute with your code.
# pass
# Initial Input Parameter
contour_layer = self.layers_dict[
self.dlg.Contour_Layer.currentIndex()]
contour_elev_field = self.dlg.Contour_Elev_Field.currentText()
river_layer = self.layers_dict[self.dlg.River_Layer.currentIndex()]
output_directory = self.dlg.Output_Directory.text()
# Get data CRS
contour_crs = contour_layer.crs().authid()
river_crs = river_layer.crs().authid()
if contour_crs == river_crs:
shpdriver = ogr.GetDriverByName('ESRI Shapefile')
# Intersect line
output_point = os.path.join(output_directory,
"point_of_intersect.shp")
if os.path.exists(output_point):
shpdriver.DeleteDataSource(output_point)
processing.runandload("qgis:lineintersections", contour_layer,
river_layer, str(contour_elev_field), '',
output_point)
intersect_points_layer = QgsVectorLayer(
output_point, 'point_of_intersect', 'ogr')
# Split lines with lines
output_split_lines = os.path.join(output_directory,
"splited_lines.shp")
if os.path.exists(output_split_lines):
shpdriver.DeleteDataSource(output_split_lines)
processing.runalg('saga:splitlineswithlines', river_layer,
contour_layer, 1, output_split_lines)
splited_lines_layer = QgsVectorLayer(output_split_lines,
'splited_lines', 'ogr')
# Join Attributes
output_joint_lines = os.path.join(output_directory,
"joint_lines.shp")
if os.path.exists(output_joint_lines):
shpdriver.DeleteDataSource(output_joint_lines)
processing.runalg("qgis:joinattributesbylocation",
splited_lines_layer, intersect_points_layer,
u'intersects', 0, 1, 'max,min', 0,
output_joint_lines)
joint_lines_layer = QgsVectorLayer(output_joint_lines,
'joint_lines', 'ogr')
# Dissolve contour layers
contour_dissolved = os.path.join(output_directory,
"dissolved_contour.shp")
processing.runalg("qgis:dissolve", contour_layer, "false",
str(contour_elev_field), contour_dissolved)
contour_dissolved_layer = QgsVectorLayer(
contour_dissolved, 'contour_dissolved', 'ogr')
# Dissolve river layers
river_dissolved = os.path.join(output_directory,
"dissolved_river.shp")
processing.runalg("qgis:dissolve", joint_lines_layer, "false",
'min' + str(contour_elev_field),
river_dissolved)
river_dissolved_layer = QgsVectorLayer(river_dissolved,
'river_dissolved',
'ogr')
# Generate Poliylines Vector for every features
root = QgsProject.instance().layerTreeRoot()
contourGroup = root.addGroup("Contour Group")
riverGroup = root.addGroup("River Group")
# Contour
dataSource_contour = ogr.Open(
contour_dissolved_layer.dataProvider().dataSourceUri().
split("|")[0], 0)
layerContour = dataSource_contour.GetLayer()
n = 0
for feature in layerContour:
n += 1
geom = feature.GetGeometryRef()
contour_directory = os.path.join(output_directory,
'contour')
if not os.path.exists(contour_directory):
os.mkdir(contour_directory)
output_vector_contour = os.path.join(
contour_directory,
str(int(feature.GetField(contour_elev_field))) +
'b.shp')
output_prj_contour = os.path.join(
contour_directory,
str(int(feature.GetField(contour_elev_field))) +
'b.prj')
data_source_contour = shpdriver.CreateDataSource(
output_vector_contour)
srs = osr.SpatialReference()
srs.ImportFromEPSG(
int(contour_dissolved_layer.crs().authid().split(":")
[1]))
srs.MorphToESRI()
prj_file = open(output_prj_contour, 'w')
prj_file.write(srs.ExportToWkt())
prj_file.close()
output_vector_contour = output_vector_contour.encode(
'utf-8')
layer_contour = data_source_contour.CreateLayer(
output_vector_contour, srs, ogr.wkbLineString)
layer_contour.CreateField(
ogr.FieldDefn("ELEV", ogr.OFTReal))
fet = ogr.Feature(layer_contour.GetLayerDefn())
fet.SetField("ELEV", feature.GetField(contour_elev_field))
fet.SetGeometry(geom)
layer_contour.CreateFeature(fet)
data_source_contour.Destroy()
if self.dlg.autoAdd.isChecked():
vectorLyr = QgsVectorLayer(
output_vector_contour,
str(int(feature.GetField(contour_elev_field))) +
'b', "ogr")
contourGroup.insertChildNode(
1, QgsLayerTreeLayer(vectorLyr))
QgsMapLayerRegistry.instance().addMapLayer(
vectorLyr, False)
dataSource_contour.Destroy()
# River
dataSource_river = ogr.Open(
river_dissolved_layer.dataProvider().dataSourceUri().split(
"|")[0], 0)
layerRiver = dataSource_river.GetLayer()
n = 0
for feature in layerRiver:
n += 1
geom = feature.GetGeometryRef()
river_directory = os.path.join(output_directory, 'river')
if not os.path.exists(river_directory):
os.mkdir(river_directory)
output_vector_river = os.path.join(
river_directory,
str(int(feature.GetField('min' + contour_elev_field)))
+ 'a.shp')
output_prj_river = os.path.join(
river_directory,
str(int(feature.GetField('min' + contour_elev_field)))
+ 'a.prj')
data_source_river = shpdriver.CreateDataSource(
output_vector_river)
srs = osr.SpatialReference()
srs.ImportFromEPSG(
int(river_dissolved_layer.crs().authid().split(":")
[1]))
srs.MorphToESRI()
prj_file = open(output_prj_river, 'w')
prj_file.write(srs.ExportToWkt())
prj_file.close()
output_vector_river = output_vector_river.encode('utf-8')
layer_river = data_source_river.CreateLayer(
output_vector_river, srs, ogr.wkbLineString)
layer_river.CreateField(ogr.FieldDefn("ELEV", ogr.OFTReal))
fet = ogr.Feature(layer_river.GetLayerDefn())
fet.SetField("ELEV",
feature.GetField('min' + contour_elev_field))
fet.SetGeometry(geom)
layer_river.CreateFeature(fet)
data_source_river.Destroy()
if self.dlg.autoAdd.isChecked():
vectorLyr = QgsVectorLayer(
output_vector_river,
str(
int(
feature.GetField('min' +
contour_elev_field))) +
'a', "ogr")
riverGroup.insertChildNode(
1, QgsLayerTreeLayer(vectorLyr))
QgsMapLayerRegistry.instance().addMapLayer(
vectorLyr, False)
dataSource_river.Destroy()
else:
raise Exception(
'Contour and river are not in the same Coordinate Reference System.'
)
def test_runandload(self):
processing.runandload("qgis:countpointsinpolygon",polygons(),points(),"NUMPOINTS", None)
layer = getObjectFromName("Result")
self.assertIsNotNone(layer)
def gdal_polygonize(self, layer, f):
output_file = f + '/temp_pol.shp'
result = processing.runandload('gdalogr:polygonize', layer, "DN",
"test1", "test2", self.outputFile)
def run_summary(self):
brgy = QgsMapLayerRegistry.instance().mapLayersByName(self.summBrgyComboBox.currentText())[0]
muniField = self.muniFieldComboBox.currentText()
statFieldName = self.fieldComboBox.currentText()
statField = indicators.get_indicator_code_from_name(statFieldName)
statField0 = get_field(brgy, statField)
dissolveField = get_field(brgy, muniField)
stat = self.statComboBox.currentText()
fieldList = get_list_of_fields(brgy, [muniField, statField])
munis = list(set([m[0] for m in fieldList]))
munisDict = {}
for m in munis:
munisDict[m] = []
for f in fieldList:
munisDict[f[0]].append(f[1])
processing.runandload("qgis:dissolve", brgy, False, muniField, "memory:")
out1 = QgsMapLayerRegistry.instance().mapLayersByName("Dissolved")[0]
res = out1.dataProvider().addAttributes([QgsField(stat, statField0.type())])
out1.updateFields()
statIndex = out1.fieldNameIndex(stat)
muniIndex = out1.fieldNameIndex(muniField)
if stat == "SUM":
features = out1.getFeatures()
for f in features:
out1.startEditing()
attr = f.attributes()
f[statIndex] = sum(munisDict[attr[muniIndex]])
out1.updateFeature(f)
if stat == "MEAN":
features = out1.getFeatures()
for f in features:
out1.startEditing()
attr = f.attributes()
f[statIndex] = round(1.0*sum(munisDict[attr[muniIndex]])/len(munisDict[attr[muniIndex]]), 2)
out1.updateFeature(f)
if stat == "MIN":
features = out1.getFeatures()
for f in features:
out1.startEditing()
attr = f.attributes()
f[statIndex] = min(munisDict[attr[muniIndex]])
out1.updateFeature(f)
if stat == "MAX":
features = out1.getFeatures()
for f in features:
out1.startEditing()
attr = f.attributes()
f[statIndex] = min(munisDict[attr[muniIndex]])
out1.updateFeature(f)
if stat == "PERCENTAGE":
sumDict = {}
total = 0
features = out1.getFeatures()
for f in features:
attr = f.attributes()
sumDict[attr[muniIndex]] = sum(munisDict[attr[muniIndex]])
total += sum(munisDict[attr[muniIndex]])
features2 = out1.getFeatures()
for f in features2:
out1.startEditing()
attr = f.attributes()
f[statIndex] = round(100.0*sumDict[attr[muniIndex]]/total, 2)
out1.updateFeature(f)
out1.commitChanges()
processing.runandload("qgis:deleteholes", out1, "memory:")
out2 = QgsMapLayerRegistry.instance().mapLayersByName("Cleaned")[0]
out2.setLayerName("{} ({})".format(stat, statFieldName))
QgsMapLayerRegistry.instance().removeMapLayers([out1.id()])
if self.labelCheckBox.isChecked():
add_labels(out2, stat)
if self.symCheckBox.isChecked():
pass
# Delete other fields
remove_other_fields_summary(out2, muniField)
# Performing a Union on Vector Shapes
# https://github.com/GeospatialPython/Learn/raw/master/union.zip
import processing
processing.runandload("qgis:union", "/qgis_data/union/building.shp",
"/qgis_data/union/walkway.shp",
"/qgis_data/union/union.shp")
def test_runandload(self):
processing.runandload('qgis:countpointsinpolygon', polygons(),
points(), 'NUMPOINTS', None)
layer = getObjectFromName('Result')
self.assertIsNotNone(layer)
# Make a globe-like azimuthal orthographic projection
# https://github.com/GeospatialPython/Learn/raw/master/countries.zip
import processing
pth = "/qgis_data/countries.shp"
clipped = "/qgis_data/clipped_countries.shp"
warped = "/qgis_data/sphere.shp"
x = 22
y = 36
processing.runalg(
"cliptohemisphere:clipavectorlayertothehemispherecentredonauserspecifiedpoint",
pth,
y,
x,
500,
clipped,
progress=None)
processing.runandload("qgis:reprojectlayer", clipped, "EPSG:53032", warped)
def run(self):
"""Run method that performs all the real work"""
# show the dialog
self.dlg.show()
# Run the dialog event loop
result = self.dlg.exec_()
# See if OK was pressed
if result:
# Do something useful here - delete the line containing pass and
# substitute with your code.
selectedLayerIndex = self.dlg.comboBox.currentText()
filename = self.work_path + '/' + selectedLayerIndex
msg = 'The input shapefile will be {}'.format(filename)
path = str(filename)
layer = iface.addVectorLayer(path, '', "ogr")
self.iface.messageBar().pushInfo('Open', msg)
selectedLayerIndex2 = self.dlg.comboBox_2.currentText()
selectedLayerIndex3 = self.dlg.comboBox_3.currentText()
selectedLayerIndex4 = self.dlg.comboBox_4.currentText()
filename2 = self.work_path + '/' + selectedLayerIndex2
filename3 = self.work_path + '/' + selectedLayerIndex3
filename4 = self.work_path + '/' + selectedLayerIndex4
path2 = str(filename2)
path3 = str(filename3)
path4 = str(filename4)
mainworkpath = self.work_path + '/'
trtshp = path4
layer = QgsVectorLayer(trtshp, 'Franklin tracts', 'ogr')
shpname = path4
dbfname = path3
outshpname = mainworkpath
layer = QgsVectorLayer(shpname, 'Tracts', 'ogr')
layer.isValid()
table = QgsVectorLayer(dbfname, 'Population', 'ogr')
table.isValid()
info = QgsVectorJoinInfo()
info.joinLayerId = table.id()
info.joinFieldName = 'GEO_ID'
info.targetFieldName = 'STFID2'
info.setJoinFieldNamesSubset(['P001001'])
info.memoryCache = True
layer.addJoin(info)
QgsVectorFileWriter.writeAsVectorFormat(layer, outshpname, 'CP120',
None, 'ESRI Shapefile')
layer_joined = QgsVectorLayer(outshpname, 'Joined', 'ogr')
layer_joined.isValid()
layer.dataProvider().fields().count()
layer_joined.dataProvider().fields().count()
shp1 = path4
shp2 = path
layer_joined = QgsVectorLayer(shp1, 'Franklin tracts', 'ogr')
layer2 = QgsVectorLayer(shp2, 'Public libraries', 'ogr')
registry = QgsMapLayerRegistry.instance()
registry.addMapLayers([layer2, layer_joined])
shpname = 'H:/qgis2/Data/trt00_shp.shp'
layer = QgsVectorLayer(shpname, 'county', 'ogr')
pointLayer = path
outshp = 'H:/qgis2/Data/thiessen'
extnt = layer.extent().toString()
extent = extnt.replace(":", ",").replace(" ", "")
bbox = extent
processing.runandload("grass7:v.voronoi", pointLayer, False, False,
bbox, -1, 0.0001, 0, outshp)
processing.runandload('qgis:intersection', shp1, "Voronoi diagram",
True, "intersect")
processing.runalg('qgis:addfieldtoattributestable', "Intersection",
"AreaNew", 1, 20, 0, mainworkpath + "shp3")
processing.runalg(
'qgis.fieldcalculator',
"shp3",
"AreaNew",
1,
20,
0,
)
epsg = theLayerActive.crs().authid()
uri = "Point?crs=" + epsg + "&field=id:integer" "&index=yes"
mem_layer = QgsVectorLayer(uri, 'SplitPoints', 'memory')
prov = mem_layer.dataProvider()
feats = [QgsFeature() for i in range(len(points))]
for i, feat in enumerate(feats):
feat.setAttributes([i])
feat.setGeometry(QgsGeometry.fromWkt(points[i]))
prov.addFeatures(feats)
QgsMapLayerRegistry.instance().addMapLayer(mem_layer)
progress.setPercentage(50)
progress.setText(
"Building segmented line layer named 'Intersection'...")
time.sleep(2)
Intersection = processing.runandload('saga:splitlinesatpoints',
theLayerActive, mem_layer,
1, 0.001, None)
if len(QgsMapLayerRegistry.instance().mapLayersByName(
'Intersection')) == 0:
QMessageBox.information(
None, "Error!",
"Segmented line layer named 'Intersection' not created. Ending script."
)
while len(QgsMapLayerRegistry.instance().mapLayersByName(
'SplitPoints')) > 0:
layer = QgsMapLayerRegistry.instance().mapLayersByName(
'SplitPoints')[0]
QgsMapLayerRegistry.instance().removeMapLayer(
layer.id())
else:
theactivelayer = iface.activeLayer()
# Merging Shapefiles
# https://github.com/GeospatialPython/Learn/raw/master/tiled_footprints.zip
# See also: processing.alghelp("qgis:mergevectorlayers")
import glob
import processing
pth = "/qgis_data/tiled_footprints/"
files = glob.glob(pth + "*.shp")
out = pth + "merged.shp"
processing.runandload("saga:mergelayers", ";".join(files), "True", "True", out)
rasterPth = pth + "elevation.asc"
vectorPth = pth + "paths.shp"
pointsPth = pth + "points.shp"
elvPointsPth = pth + "elvPoints.shp"
settings = QSettings()
originalSetting = settings.value("/Projections/defaultBehaviour",
"prompt",
type=str)
settings.setValue("/Projections/defaultBehaviour", "useProject")
rasterLyr = QgsRasterLayer(rasterPth, "Elevation")
crs = QgsCoordinateReferenceSystem()
crs.createFromSrid(4326)
rasterLyr.setCrs(crs)
settings.setValue("/Projections/defaultBehaviour", originalSetting)
rasterLyr.isValid()
# True
vectorLyr = QgsVectorLayer(vectorPth, "Path", "ogr")
vectorLyr.isValid()
# True
QgsMapLayerRegistry.instance().addMapLayers([rasterLyr])
QgsMapLayerRegistry.instance().addMapLayers([vectorLyr, rasterLyr])
processing.runalg("saga:convertlinestopoints", vectorLyr, False, 1, pointsPth)
processing.runandload("saga:addgridvaluestopoints", pointsPth, rasterPth, 0,
elvPointsPth)
# Creating Vector Contours from Elevation Data
# https://github.com/GeospatialPython/Learn/raw/master/dem.zip
import processing
rasterLyr = QgsRasterLayer("/qgis_data/rasters/dem.asc", "DEM")
rasterLyr.isValid()
# True
QgsMapLayerRegistry.instance().addMapLayers([rasterLyr])
processing.runandload("gdalogr:contour", rasterLyr, 50.0, "Elv", None,
"/qgis_data/rasters/contours.shp")
def polygonizeRaster(iface, dlg, dir_dest, rasterToPolygonizeName,
vectorPolygonName):
# Fonction de vectorisation
li = layerList(iface)
rasterToPolygonize = li[rasterToPolygonizeName]
messInfo(dlg, "Vectorisation du raster: " + rasterToPolygonizeName)
messInfo(dlg, "")
outputVectorPath = dir_dest + os.sep + vectorPolygonName + EXT_VECTOR
if os.path.exists(outputVectorPath):
try:
os.remove(outputVectorPath)
except:
QMessageBox.information(
None, "Attention !!!",
unicode(
outputVectorPath +
u" ne peut pas être effacé. Vérifiez que le fichier n'est pas verrouillé par un autre utilisateur ou que le fichier peut être effacé manuellement."
).encode('latin 1'))
messErreur(
dlg,
unicode(outputVectorPath +
u" ne peut pas être effacé.").encode('latin 1'))
return None
if rasterToPolygonize:
try:
processing.runandload('gdalogr:polygonize', rasterToPolygonize,
'DN', outputVectorPath)
except:
messErreur(
dlg,
unicode(u"Erreur pendant l'exécution de gdalogr:polygonize.").
encode('latin 1'))
return None
else:
messErreur(
dlg, u"fin de traitement sur gdalogr:polygonize, " +
rasterToPolygonizeName + " n'est pas valide.")
return None
layer = None
for elem in li:
if elem in (u'Vectorisé', 'Vectorized', 'Output layer',
vectorPolygonName + EXT_VECTOR):
layer = li[elem]
if not layer:
messErreur(
dlg,
unicode(
u"fin de traitement sur gdalogr:polygonize. Vérifiez que vous avez bien les droits d'écriture sur le répertoire: "
+ dir_dest).encode('latin 1'))
return None
messInfo(dlg, "Fin vectorisation du raster: " + rasterToPolygonizeName)
messInfo(dlg, "")
return layer
t.start()
print "interpolating " + date
outputs_1=processing.runalg("saga:multilevelbsplineinterpolation",SNWD_data_uri,"Value",1,0.0001,50,"-124.763068,-66.949895,24.523096,49.384358",0.025,None)
t.cancel()
print "b-spline interpolation took " + str(time.time()-t_spline_start) + " seconds."
#clip to state shapefile
print "masking " + date
outputs_2=processing.runalg("gdalogr:cliprasterbymasklayer",outputs_1['USER_GRID'],lower_48_shapefile,"-9999",False,False,"",None)
#Gaussian filter to reduce "holes"
t = threading.Timer(20.0, kill_saga_cmd) #ends unresponsive saga_cmd.exe after 20 seconds, which is about double the amount of time this step usually takes
t.start()
t_filter_start=time.time()
print "filtering " + date
outputs_3=processing.runandload("saga:gaussianfilter",outputs_2['OUTPUT'], 5, 1, 10,None)
t.cancel()
print "gaussian filter took " + str(time.time()-t_filter_start) + " seconds."
#identify raster layer
layers = iface.legendInterface().layers()
for layer in layers:
if 'Filtered Grid' in layer.name():
#render
fcn = QgsColorRampShader()
fcn.setColorRampType(QgsColorRampShader.INTERPOLATED)
#Snow Depth Color Gradient (same as that used by http://www.instantweathermaps.com/ )
colormap = []
colormap.append(QgsColorRampShader.ColorRampItem(0,QColor(255,255,255,0),'0 Inches'))
colormap.append(QgsColorRampShader.ColorRampItem(2.5399,QColor(255,255,255,0),'0.099 Inches'))
colormap.append(QgsColorRampShader.ColorRampItem(2.54,QColor(230,255,225,76.5),'0.1 Inches'))
QgsMapLayerRegistry.instance().addMapLayer(short_paths)
network.removeSelection()
network.select(f)
New_feat=[]
for f in network.selectedFeatures():
fet = QgsFeature()
fet.setGeometry(QgsGeometry().fromPoint(QgsPoint(i[0],i[1])))
fet.setAttributes (f.attributes())
New_feat.append(fet)
pr=short_paths.dataProvider()
short_paths.addFeatures(New_feat)
processing.runandload("qgis:explodelines",network,new_path_expl)
"""Make groups to subgraph"""
network=iface.mapCanvas().currentLayer()
G=nx.Graph()
for f in network.getFeatures():
f_geom=f.geometry()
id=f.id()
p0=f_geom.asPolyline()[0]
p1=f_geom.asPolyline()[-1]
G.add_edge(p0,p1,{'fid':id})
groups=[]
for i in connected_components(G):
groups.append(list(i))
def gdal_polygonize(self, layer, f):
#output_file = f + '/temp_pol.shp'
result = processing.runandload('gdalogr:polygonize', layer, "DN",
"output")
def saga_map_calculator(self, tempLayer):
rasterFilterSaga = 'ifelse(g1 = 0, 0/0, g1)'
output_alg = processing.runandload('saga:rastercalculator', tempLayer,
'', rasterFilterSaga, False, 7,
None)
#========================================================
# Creating an elevation hillshade
#========================================================
#Import the processing module:
import processing
# Load and validate the layer:
rasterLyr = QgsRasterLayer("/qgis_data/rasters/dem.asc","Hillshade")
rasterLyr.isValid()
#Run the Hillshade algorithm, providing the algorithm name, layer reference,
#band number, compute edges option, zevenbergen option for smoother terrain,
#z-factor elevation exaggeration number, scaling ratio of vertical to horizontal units,
#azimuth (angle of the light source), altitude (height of the light source), and output
#image's name:
processing.runandload("gdalogr:hillshade", rasterLyr, 1,False, False, 1.0, 1.0, 315.0, 45.0,"/qgis_data/rasters/hillshade.tif")
# Verify that the output image, hillshade.tif, looks similar to the following
#image in QGIS. It should be automatically
#========================================================
# Creating vector contours from elevation data
#========================================================
#Import the processing module.
import processing
# Load and validate the DEM:
rasterLyr = QgsRasterLayer("/qgis_data/rasters/dem.asc","DEM")
rasterLyr.isValid()
# Add the DEM to the map using the mapLayerRegistry method:
# join meridian motorways, a-roads and b-roads in one shapefile
meridian_motorways_path = 'C:/Users/I.Kolovou/Desktop/itn/motorway_polyline_sample.shp'
meridian_a_roads_path = 'C:/Users/I.Kolovou/Desktop/itn/a_road_polyline_sample.shp'
meridian_b_roads_path = 'C:/Users/I.Kolovou/Desktop/itn/b_road_polyline_sample.shp'
meridian_motorways = QgsVectorLayer(meridian_motorways_path, "meridian_motorways", "ogr")
meridian_a_roads = QgsVectorLayer(meridian_a_roads_path, "meridian_a_roads", "ogr")
meridian_b_roads = QgsVectorLayer(meridian_b_roads_path, "meridian_b_roads", "ogr")
meridian_shp_path = 'C:/Users/I.Kolovou/Desktop/itn/meridian.shp'
# TODO: add class column for motorways, a roads and b roads
processing.runalg("qgis:mergevectorlayers", [meridian_motorways, meridian_a_roads, meridian_b_roads], meridian_shp_path)
meridian = QgsVectorLayer(meridian_shp_path, "meridian_sample", "ogr")
meridian_buffer_shp_path = 'C:/Users/I.Kolovou/Desktop/itn/meridian_buffer.shp'
meridian_buffer = processing.runandload("qgis:fixeddistancebuffer", meridian, 10, 5, False, meridian_buffer_shp_path)
# create a graph from os road layer
def update_feat_id_col(shp, col_name, start):
pr = shp.dataProvider()
fieldIdx = shp.dataProvider().fields().indexFromName(col_name)
if fieldIdx == -1:
pr.addAttributes([QgsField(col_name, QVariant.Int)])
fieldIdx = shp.dataProvider().fields().indexFromName(col_name)
fid = 1
updateMap = {}
if start == 0:
for f in shp.dataProvider().getFeatures():
updateMap[f.id()] = {fieldIdx: f.id()}
elif start == 1:
