def callOMEdit(self):
if self.obj_validation.validateTool("OMEdit"):
self.cmd2 = "OMEdit " + self.modelicaNetlist
self.obj_workThread2 = Worker.WorkerThread(self.cmd2)
self.obj_workThread2.start()
print("OMEdit called")
self.obj_appconfig.print_info("OMEdit called")
else:
self.msg = QtGui.QMessageBox()
self.msgContent = (
"There was an error while opening OMEdit.<br/>"
"Please make sure OpenModelica is installed in your"
" system.<br/>"
"To install it on Linux : Go to <a href="
"https://www.openmodelica.org/download/download-linux"
">OpenModelica Linux</a> and install nightly build"
" release.<br/>"
"To install it on Windows : Go to <a href="
"https://www.openmodelica.org/download/download-windows"
">OpenModelica Windows</a> and install latest version.<br/>")
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Missing OpenModelica")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
def open_OMoptim(self):
"""
This function uses validateTool() method from Validation.py:
- If 'OMOptim' is present in executables list then
it passes command 'OMOptim' to WorkerThread class of Worker.py
- If 'OMOptim' is not present, then it shows error message with
link to download it on Linux and Windows.
"""
print("Function : OMOptim")
self.obj_appconfig.print_info('OMOptim is called')
# Check if OMOptim is installed
if self.obj_validation.validateTool("OMOptim"):
# Creating a command to run
self.cmd = "OMOptim"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = (
"There was an error while opening OMOptim.<br/>"
"Please make sure OpenModelica is installed in your"
" system.<br/>"
"To install it on Linux : Go to <a href="
"https://www.openmodelica.org/download/download-linux"
">OpenModelica Linux</a> and install nightly build"
" release.<br/>"
"To install it on Windows : Go to <a href="
"https://www.openmodelica.org/download/download-windows"
">OpenModelica Windows</a> and install latest version.<br/>")
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Error Message")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
def open_nghdl(self):
"""
This function calls NGHDL option in left-tool-bar.
It uses validateTool() method from Validation.py:
- If 'nghdl' is present in executables list then
it passes command 'nghdl -e' to WorkerThread class of
Worker.py.
- If 'nghdl' is not present, then it shows error message.
"""
print("Function : NGHDL")
self.obj_appconfig.print_info('NGHDL is called')
if self.obj_validation.validateTool('nghdl'):
self.cmd = 'nghdl -e'
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle('NGHDL Error')
self.msg.showMessage('Error while opening NGHDL. ' +
'Please make sure it is installed')
self.obj_appconfig.print_error('Error while opening NGHDL. ' +
'Please make sure it is installed')
self.msg.exec_()
def callOMEdit(self):
try:
modelFiles = glob.glob(self.modelicaNetlist)
modelFiles = ' '.join(file for file in modelFiles)
self.cmd2 = self.OMPath + "/OMEdit " + modelFiles
print(self.cmd2)
self.obj_workThread2 = Worker.WorkerThread(self.cmd2)
self.obj_workThread2.start()
print("OMEdit called")
self.obj_appconfig.print_info("OMEdit called")
except BaseException:
self.msg = QtWidgets.QMessageBox()
self.msgContent = (
"There was an error while opening OMEdit.<br/>"
"Please make sure OpenModelica is installed in your"
" system.<br/>"
"To install it on Linux : Go to <a href="
"https://www.openmodelica.org/download/download-linux"
">OpenModelica Linux</a> and install nightly build"
" release.<br/>"
"To install it on Windows : Go to <a href="
"https://www.openmodelica.org/download/download-windows"
">OpenModelica Windows</a> and install latest version.<br/>")
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Missing OpenModelica")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
def createSubcircuit(self, subName):
"""
This function create Subcircuit related directories and files
"""
self.create_schematic = subName
#Checking if Workspace already exist or not
self.schematic_path = (os.path.join(os.path.abspath('..'),
'SubcircuitLibrary',
self.create_schematic))
#Validation for new subcircuit
if self.schematic_path == "":
self.reply = "NONE"
else:
self.reply = self.obj_validation.validateNewproj(
str(self.schematic_path))
#Checking Validations Response
if self.reply == "VALID":
print "Validated : Creating subcircuit directory"
try:
os.mkdir(self.schematic_path)
self.schematic = os.path.join(self.schematic_path,
self.create_schematic)
self.cmd = "eeschema " + self.schematic + ".sch"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
self.close()
except:
#print "Some Thing Went Wrong"
self.msg = QtGui.QErrorMessage(self)
self.msg.showMessage(
'Unable to create subcircuit. Please make sure you have write permission on '
+ self.schematic_path)
self.msg.setWindowTitle("Error Message")
self.obj_appconfig.current_subcircuit[
'SubcircuitName'] = self.schematic_path
elif self.reply == "CHECKEXIST":
#print "Project already exist"
self.msg = QtGui.QErrorMessage(self)
self.msg.showMessage(
'The subcircuit "' + self.create_schematic +
'" already exist.Please select the different name or delete existing subcircuit'
)
self.msg.setWindowTitle("Error Message")
elif self.reply == "CHECKNAME":
#print "Name is not proper"
self.msg = QtGui.QErrorMessage(self)
self.msg.showMessage(
'The subcircuit name should not contain space between them')
self.msg.setWindowTitle("Error Message")
elif self.reply == "NONE":
self.msg = QtGui.QErrorMessage(self)
self.msg.showMessage('The subcircuit name cannot be empty')
self.msg.setWindowTitle("Error Message")
def open_nghdl(self):
print "Function : Nghdl"
self.obj_appconfig.print_info('Nghdl is called')
if self.obj_validation.validateTool('nghdl'):
self.cmd = 'nghdl -e'
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage('Error while opening nghdl. Please make sure nghdl is installed')
self.obj_appconfig.print_error('Error while opening nghdl. Please make sure nghdl is installed')
self.msg.setWindowTitle('nghdl Error Message')
def open_OMoptim(self):
print "Function : OM Optim"
self.obj_appconfig.print_info('OM Optim is called')
#Check if OMOptim is installed
if self.obj_validation.validateTool("OMOptim"):
#Creating a command to run
self.cmd = "OMOptim"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = "There was an error while opening OMOptim.<br/>\
Please make sure OpenModelica is installed in your system. <br/>\
To install it on Linux : Go to <a href=https://www.openmodelica.org/download/download-linux>OpenModelica Linux</a> and install nigthly build release.<br/>\
To install it on Windows : Go to <a href=https://www.openmodelica.org/download/download-windows>OpenModelica Windows</a> and install latest version.<br/>"
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Error Message")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
def createSubcircuit(self, subName):
"""
- This function create workspace for subcircuit.
- It also validate file names for Subcircuits:
- File name should not contain space.
- Name can not be empty.
- File name already exists.
"""
self.create_schematic = subName
# Checking if Workspace already exist or not
self.schematic_path = (os.path.join(os.path.abspath('library'),
'SubcircuitLibrary',
self.create_schematic))
# Validation for new subcircuit
if self.schematic_path == "":
self.reply = "NONE"
else:
self.reply = self.obj_validation.validateNewproj(
str(self.schematic_path))
# Checking Validations Response
if self.reply == "VALID":
print("Validated : Creating subcircuit directory")
try:
os.mkdir(self.schematic_path)
self.schematic = os.path.join(self.schematic_path,
self.create_schematic)
self.cmd = "eeschema " + self.schematic + ".sch"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
self.close()
except BaseException:
self.msg = QtGui.QErrorMessage(self)
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage(
'Unable to create subcircuit. Please make sure ' +
'you have write permission on ' + self.schematic_path)
self.msg.exec_()
self.obj_appconfig.current_subcircuit['SubcircuitName'] \
= self.schematic_path
elif self.reply == "CHECKEXIST":
self.msg = QtGui.QErrorMessage(self)
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage(
'The subcircuit "' + self.create_schematic +
'" already exist.Please select the different name or delete' +
'existing subcircuit')
self.msg.exec_()
elif self.reply == "CHECKNAME":
self.msg = QtGui.QErrorMessage(self)
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage(
'The subcircuit name should not contain space between them')
self.msg.exec_()
elif self.reply == "NONE":
self.msg = QtGui.QErrorMessage(self)
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage('The subcircuit name cannot be empty')
self.msg.exec_()