def run_savnw_simulation(datapath, outfile1, outfile2, outfile3, prgfile):
import psspy
psspy.psseinit()
savfile = 'Converted_NETS-NYPS 68 Bus System_C.sav'
snpfile = 'NETS-NYPS 68 Bus System.snp'
if datapath:
savfile = os.path.join(datapath, savfile)
snpfile = os.path.join(datapath,
snpfile) #why produce these two kinds of files?
psspy.lines_per_page_one_device(1, 90)
psspy.progress_output(2, prgfile, [0, 0])
ierr = psspy.case(savfile)
if ierr:
psspy.progress_output(1, "", [0, 0])
print(" psspy.case Error")
return
ierr = psspy.rstr(snpfile)
if ierr:
psspy.progress_output(1, "", [0, 0])
print(" psspy.rstr Error")
return
# fault + line trip
psspy.strt(0, outfile1)
psspy.run(0, 1.0, 1000, 1, 0)
psspy.dist_bus_fault(52, 1, 138.0, [0.0, -0.2E+10])
psspy.run(0, 1.1, 1000, 1, 0)
psspy.dist_clear_fault(1)
psspy.dist_branch_trip(52, 55, '1')
psspy.run(0, 1.2, 1000, 1, 0)
psspy.dist_machine_trip(1, '1')
psspy.run(0, 5.0, 1000, 1, 0)
# line trip (with faults) + generator trip
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0, outfile2)
psspy.run(0, 1.0, 1000, 1, 0)
psspy.dist_bus_fault(52, 1, 138.0, [0.0, -0.2E+10])
psspy.run(0, 1.1, 1000, 1, 0)
psspy.dist_clear_fault(1)
psspy.run(0, 1.2, 1000, 1, 0)
psspy.dist_machine_trip(8, '1')
psspy.run(0, 5.0, 1000, 1, 0)
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0, outfile3)
psspy.run(0, 1.0, 1000, 1, 0)
psspy.dist_branch_trip(32, 33, '1')
psspy.run(0, 5.0, 1000, 1, 0)
psspy.lines_per_page_one_device(2, 10000000)
psspy.progress_output(1, "", [0, 0])
def run_savnw_simulation(datapath, outfile1, outfile2, outfile3, prgfile):
import psspy
psspy.psseinit()
savfile = 'savcnv.sav'
snpfile = 'savnw.snp'
if datapath:
savfile = os.path.join(datapath, savfile)
snpfile = os.path.join(datapath, snpfile)
psspy.lines_per_page_one_device(1, 90)
psspy.progress_output(2, prgfile, [0, 0])
ierr = psspy.case(savfile)
if ierr:
psspy.progress_output(1, "", [0, 0])
print(" psspy.case Error")
return
ierr = psspy.rstr(snpfile)
if ierr:
psspy.progress_output(1, "", [0, 0])
print(" psspy.rstr Error")
return
psspy.strt(0, outfile1)
psspy.run(0, 1.0, 1000, 1, 0)
psspy.dist_bus_fault(154, 1, 230.0, [0.0, -0.2E+10])
psspy.run(0, 1.05, 1000, 1, 0)
psspy.dist_clear_fault(1)
psspy.run(0, 5.0, 1000, 1, 0)
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0, outfile2)
psspy.run(0, 1.0, 1000, 1, 0)
psspy.dist_machine_trip(3018, '1')
psspy.run(0, 5.0, 1000, 1, 0)
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0, outfile3)
psspy.run(0, 1.0, 1000, 1, 0)
psspy.dist_branch_trip(3005, 3007, '1')
psspy.run(0, 5.0, 1000, 1, 0)
psspy.lines_per_page_one_device(2, 10000000)
psspy.progress_output(1, "", [0, 0])
def run_savnw_simulation(datapath, outfile, prgfile):
import psspy
psspy.psseinit()
savfile = 'Converted_NETS-NYPS 68 Bus System_C.sav'
snpfile = 'NETS-NYPS 68 Bus System.snp'
if datapath:
savfile = os.path.join(datapath, savfile)
snpfile = os.path.join(datapath, snpfile)
psspy.lines_per_page_one_device(1,90)
psspy.progress_output(2,prgfile,[0,0]) # directly output to file
ierr = psspy.case(savfile)
if ierr:
psspy.progress_output(1,"",[0,0])
print(" psspy.case Error")
return
ierr = psspy.rstr(snpfile)
if ierr:
psspy.progress_output(1,"",[0,0])
print(" psspy.rstr Error")
return
# branches
ibus,jbus,id=read_rawdata.branch_bus()
for i,gener in enumerate(all_gener):
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0,outfile[i])
psspy.run(0, 1.0,1000,1,0)
dist_branch_fault(ibus[i], jbus[i], id[i])
psspy.run(0, 1.2,1000,1,0)
psspy.dist_clear_fault(1)
psspy.run(0, 5.0,1000,1,0)
psspy.lines_per_page_one_device(2,10000000)#Integer DEVICE Indicates which of the four output devices is to be processed (input;
#1 for disk files.
#2 for the report window.
#3 for the first primary hard copy output device.
#4 for the second primary hard copy output device.
psspy.progress_output(1,"",[0,0])
return outfile,prgfile
with silence(output):
ierr = psspy.run(0,0.2,1,1,1) #fault on time
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print('For ' + event + ':')
print('Network did not converge between branch 1 trip and fault application, skipping...')
continue
#######
# check for convergence during fault
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.dist_bus_fault(int(FaultBus), 3, 0.0, [Rohm, 0.0])
ierr = psspy.run(0,0.3,1,1,1) #fault off time
ierr = psspy.dist_clear_fault(1)
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print('For ' + event + ':')
print('Network did not converge during fault, skipping...')
continue
# check for convergence between fault clearance and second branch trip
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(0,0.31,1,1,1) #fault off time
ierr = psspy.dist_branch_trip(L2Bus1, L2Bus2,L2cktID)
ierr = psspy.run(0,0.35,1,1,1) #fault off time
# check for non-convergence
fault_time = 0.720
if fault_type == 3: # phase to phase
psspy.dist_scmu_fault_2([0, 0, 2, 400, _i],
[0.0001, 0.0001, 999.0, 999.0])
fault_name = 'TwoPhase'
fault_time = 0.720
if fault_type == 4: # phase to phase to ground
psspy.dist_scmu_fault_2([0, 0, 2, 400, _i],
[0.0001, 0.0, 0.0001, 0.0])
fault_name = 'TwoPhaseGround'
fault_time = 0.720
psspy.run(0, 1.0 + fault_time + TimeShift, 1000, 1, 0)
psspy.dist_clear_fault(1)
psspy.run(0, 10.000 + TimeShift, 1000, 1, 0)
TimeShift = TimeShift + 5
GraphPath = FigurePath + ClauseName + fault_name + '/'
if not os.path.exists(GraphPath):
os.makedirs(GraphPath)
# read data curves
chnfobj = dyntools.CHNF(OutputFilePath)
short_title, chanid, chandata = chnfobj.get_data()
TIME = numpy.array(chandata['time'])
FREQ = numpy.array(chandata[1])
V_INV = numpy.array(chandata[2])
V_POC = numpy.array(chandata[3])
def Run_SIM(x,dyr_file,out_file): #inputs are strings\
dyre = r"""C:\Users\psse\Desktop\Phylicia\Error and Accuracy Tracking Project Sp18\RTS96\%s""" %dyr_file
out = r"""C:\Users\psse\Desktop\Phylicia\Error and Accuracy Tracking Project Sp18\RTS96\Channels\opt_%s.out""" %out_file
print dyr_file
ierr = [1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1] #checking for errors
output = StringIO.StringIO()
with silence(output):
ierr[0] = psspy.psseinit(200000) #need to have this high, otherwise there are not enough output channels
ierr[1] = psspy.case(r"""C:\Users\psse\Desktop\Phylicia\Error and Accuracy Tracking Project Sp18\RTS96\RTS96DYN.sav""")
ierr[2] = psspy.fdns([0,0,0,1,1,0,99,0])
ierr[3] = psspy.cong(0)
ierr[4] = psspy.conl(0,1,1,[0,0],[ 100.0,0.0,0.0, 100.0])
ierr[5] = psspy.conl(0,1,2,[0,0],[ 100.0,0.0,0.0, 100.0])
ierr[6] = psspy.conl(0,1,3,[0,0],[ 100.0,0.0,0.0, 100.0])
ierr[7] = psspy.ordr(0)
ierr[8] = psspy.fact()
ierr[9] = psspy.tysl(0)
ierr[10] = psspy.dyre_new([1,1,1,1],dyre,"","","")
ierr[11] = psspy.chsb(0,1,[-1,-1,-1,1,13,0]) #record voltage
ierr[12] = psspy.chsb(0,1,[-1,-1,-1,1,12,0]) #record frequency
ierr[13] = psspy.chsb(0,1,[-1,-1,-1,1,1,0]) #angle
ierr[14] = psspy.chsb(0,1,[-1,-1,-1,1,16,0]) #line P & Q
ierr[15] = psspy.strt_2([0,0],out)
ierr[16] = psspy.run(0, 0.1,1,1,0)
#ierr[17] = psspy.dist_branch_fault(217,218,r"""1""",1, 230.0,[0.0,-0.2E+10]) #Line Fault, NaN (network no good)
#ierr[17] = psspy.dist_bus_fault(211,1, 230.0,[0.0,-0.2E+10]) #bus Fault, NaN (network no good)
#a = int(x[0])
#b = int(x[1])
#ierr[17] = psspy.branch_chng_3(a,b,r"""1""",[0,_i,_i,_i,_i,_i],[_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f],[_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f],"") #Line Outage
x = int(x)
print "before machine change"
ierr[17] = psspy.machine_chng_2(x,r"""1""",[0,_i,_i,_i,_i,_i],[_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f,_f]) #Generator Outage
print "after machine change"
ierr[18] = psspy.change_channel_out_file(out)
ierr[19] = psspy.run(0, 0.5,1,1,0) #this was 10
psspy.dist_clear_fault(1)
psspy.change_channel_out_file(out)
psspy.run(1, 10.0,1,1,0)
ierr[20] = psspy.delete_all_plot_channels()
print "completed simulation"
print ierr
run_output = output.getvalue()
current_error = 0
if "Network not converged" in run_output:
print "Network not converged" #need to have something in if statement otherwise you get an indentation error
result = 0 #this will go out to a if condition to rerun the program with a different selection of buses at this accuracy
current_error = 1
#raise SystemExit #this will quit the program
elif "NaN" in run_output:
print "NaN, network is no good"
result = 0 #this will go out to a if condition to rerun the program with a different selection of buses at this accuracy
current_error = 1
#raise SystemExit #this will quit the program
if current_error == 0 and "INITIAL CONDITIONS CHECK O.K." in run_output:
print "continuing with study..."
#Gather the data and output to excel
data = dyntools.CHNF(out) #getting data from channel.out file
d,e,z=data.get_data() #gathering data from data in dictionary format
#Concatenate data so all data from one simulation is in one file
c = 1 #must start at 1, not zero
#Save Frequency and Voltage
while c < 726:
if c < 100: #Record Angle
v=z[c]
new_v = ", ".join(str(i) for i in v) #this removes the brackets at the beginning and end of the list so can be processed in matlab
a = np.matrix(new_v) #make it into a matrix
if c ==1:
ang_all = np.copy(a)
else:
ang_all = np.concatenate((ang_all,a),axis=0) #changed to concatenate vertically to test them all individually
if c > 99 and c < 173: #Record Frequency
v=z[c]
new_v = ", ".join(str(i) for i in v) #this removes the brackets at the beginning and end of the list so can be processed in matlab
f = np.matrix(new_v) #make it into a matrix
if c ==100:
f_all = np.copy(f)
else:
f_all = np.concatenate((f_all,f),axis=0) #changed to concatenate vertically to test them all individually
if c > 172 and c < 246: #Record voltage magnitude
v=z[c]
new_v = ", ".join(str(i) for i in v) #this removes the brackets at the beginning and end of the list so can be processed in matlab
f = np.matrix(new_v) #make it into a matrix
if c == 173:
all = np.copy(f)
else:
all = np.concatenate((all,f),axis=0) #changed to concatenate vertically to test them all individually
if c > 245 and c < 726: #Record P and Q
if float(c/2) == int(c/2): #P , even numbers
v=z[c]
new_v = ", ".join(str(i) for i in v) #this removes the brackets at the beginning and end of the list so can be processed in matlab
f = np.matrix(new_v) #make it into a matrix
if c == 246:
P_all = np.copy(f)
else:
P_all = np.concatenate((P_all,f),axis=0) #changed to concatenate vertically to test them all individually
else: #Q, odd numbers
v=z[c]
new_v = ", ".join(str(i) for i in v) #this removes the brackets at the beginning and end of the list so can be processed in matlab
f = np.matrix(new_v) #make it into a matrix
if c == 247:
Q_all = np.copy(f)
else:
Q_all = np.concatenate((Q_all,f),axis=0) #changed to concatenate vertically to test them all individually
c = c+1
result = [all, f_all, ang_all, P_all, Q_all] #0 is voltage, 1 is frequency
return result
def main():
try:
''' Drives a PSS/E Dynamic simulation and returns values '''
##### Get everything set up on the PSSE side
redirect.psse2py()
#output = StringIO.StringIO()
with silence():
psspy.psseinit(buses=80000)
_i = psspy.getdefaultint()
_f = psspy.getdefaultreal()
_s = psspy.getdefaultchar()
"""
# Redirect any psse outputs to psse_log
psspy.report_output(2,psse_log,[0,0])
psspy.progress_output(2,psse_log,[0,0]) #ignored
psspy.alert_output(2,psse_log,[0,0]) #ignored
psspy.prompt_output(2,psse_log,[0,0]) #ignored
"""
k = 1
for rawFile in RawFileList:
# get the percentage loading from the raw file name
if rawFile == 'savnw_conp.raw':
PL = '100'
else:
rawFileName = rawFile.replace('.raw', '')
PL = rawFileName[-3:]
#Parameters. CONFIGURE THIS
settings = {
# use the same raw data in PSS/E and TS3ph #####################################
'filename':
rawFile, #use the same raw data in PSS/E and TS3ph
################################################################################
'dyr_file':
dyrFile,
'out_file':
'output2.out',
'pf_options': [
0, #disable taps
0, #disable area exchange
0, #disable phase-shift
0, #disable dc-tap
0, #disable switched shunts
0, #do not flat start
0, #apply var limits immediately
0, #disable non-div solution
]
}
##### Load Raw Datafile and do power flow
print "\n Reading raw file:", settings['filename']
# " Reading raw file: {0:s}".format('text')
FaultRpu = 1e-06
Sbase = 100.0
#FaultBusNomVolt = float(BusDataDict[FaultBus].NominalVolt)
#Zbase = FaultBusNomVolt**2/Sbase # float since Sbase is a float
#Rohm = FaultRpu*Zbase # fault impedance in ohms
##########################
# run nested loops to see if there are any abnormal low voltages
simCount = 0 # to keep track of how many simulations are already done
croppedHVLineSet = list(HVLineSet)
for line1 in croppedHVLineSet:
for line2 in croppedHVLineSet:
# stability_indicator = 1
# Bus_issues = [] # list of buses where issues (low voltage or high dv_dt) are reported
# the lines cannot be the same
if line1 == line2:
continue
# part to ensure there is no duplication of events
currentSet = line1 + ';' + line2
currentSetReverse = line2 + ';' + line1
# if case causes topology inconsistencies, continue
if currentSet in topology_inconsistent_set or currentSetReverse in topology_inconsistent_set:
continue
line1Elements = line1.split(',')
line2Elements = line2.split(',')
# Line 1 params
L1Bus1 = int(line1Elements[0])
L1Bus2 = int(line1Elements[1])
L1cktID = line1Elements[2].strip("'").strip()
# Line 2 params
L2Bus1 = int(line2Elements[0])
L2Bus2 = int(line2Elements[1])
L2cktID = line2Elements[2].strip("'").strip()
FaultBusList = [L2Bus1,
L2Bus2] # apply faults at both buses
for FaultBus in FaultBusList:
output = StringIO.StringIO()
with silence():
ierr = psspy.read(0, settings['filename'])
#This is for the power flow. I'll use the solved case instead
ierr = psspy.fnsl(settings['pf_options'])
##### Prepare case for dynamic simulation
# Load conversion (multiple-step)
psspy.conl(_i, _i, 1, [0, _i], [_f, _f, _f, _f])
# all constant power load to constant current, constant reactive power load to constant admittance
# standard practice for dynamic simulations, constant MVA load is not acceptable
psspy.conl(1, 1, 2, [_i, _i],
[100.0, 0.0, 0.0, 100.0])
psspy.conl(_i, _i, 3, [_i, _i], [_f, _f, _f, _f])
ierr = psspy.cong(0) #converting generators
ierr = psspy.ordr(
0
) #order the network nodes to maintain sparsity
ierr = psspy.fact(
) #factorise the network admittance matrix
ierr = psspy.tysl(0) #solving the converted case
ierr = psspy.dynamicsmode(0) #enter dynamics mode
print "\n Reading dyr file:", settings['dyr_file']
ierr = psspy.dyre_new([1, 1, 1, 1],
settings['dyr_file'])
ierr = psspy.docu(0, 1, [
0, 3, 1
]) #print the starting point of state variables
# select time step ##############################################################
ierr = psspy.dynamics_solution_params(
[_i, _i, _i, _i, _i, _i, _i, _i], [
_f, _f, 0.00833333333333333, _f, _f, _f,
_f, _f
],
'out_file') # the number here is the time step
################################################################################
##### select channels
ierr = psspy.delete_all_plot_channels(
) # clear channels
# get all the bus voltages, angles and frequencies
for bus in BusDataDict:
bus = int(bus)
ierr = psspy.voltage_and_angle_channel(
[-1, -1, -1, bus])
ierr = psspy.bus_frequency_channel([-1, bus])
eventStr = PL + '/' + line1 + ';' + line2 + '/F' + str(
FaultBus)
print 'Event: {}'.format(eventStr)
# get the nominal voltages as well as the fault impedance in ohms
FaultBusNomVolt = float(
BusDataDict[str(FaultBus)].NominalVolt)
Zbase = FaultBusNomVolt**2 / Sbase # float since Sbase is a float
Rohm = FaultRpu * Zbase # fault impedance in ohms
# run simulation till just before the fault
ResultsDict = {}
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.strt(0, settings['out_file'])
ierr = psspy.run(0, 0.1, 1, 1, 1)
ierr = psspy.dist_branch_trip(
L1Bus1, L1Bus2, L1cktID)
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(0, 0.2, 1, 1, 1) #fault on time
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + eventStr + ':'
print 'Network did not converge between branch 1 trip and fault application, skipping...'
continue
#######
# check for convergence during fault
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.dist_bus_fault(
FaultBus, 3, 0.0, [Rohm, 0.0])
ierr = psspy.run(0, 0.3, 1, 1, 1) #fault off time
ierr = psspy.dist_clear_fault(1)
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + eventStr + ':'
print 'Network did not converge during fault, skipping...'
continue
# check for convergence between fault clearance and second branch trip
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(0, 0.31, 1, 1, 1) #fault off time
ierr = psspy.dist_branch_trip(
L2Bus1, L2Bus2, L2cktID)
ierr = psspy.run(0, 0.35, 1, 1, 1) #fault off time
# check for non-convergence
#output = StringIO.StringIO()
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + eventStr + ':'
print 'Network did not converge between fault clearance and branch 2 trip, skipping...'
continue
# select run time ##############################################################
output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(
0, 10.0, 1, 1, 1
) #exit time (second argument is the end time)
################################################################################
# check for non-convergence
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + eventStr + ':'
print 'Network did not converge sometime after 2nd branch trip, skipping...'
continue
outputData = dyntools.CHNF(settings['out_file'])
data = outputData.get_data()
channelDict = data[
1] # dictionary where the value is the channel description
valueDict = data[
2] # dictionary where the values are the signal values, keys match that of channelDict
tme = valueDict['time'] # get time
ResultsDict['time'] = tme
for key in channelDict:
if key == 'time':
continue
signalDescr = channelDict[key]
words = signalDescr.split()
signalType = words[0].strip()
bus = words[1].strip()
#print Bus + ' ' + signalType
if bus not in ResultsDict:
ResultsDict[bus] = Results()
if signalType == 'VOLT':
ResultsDict[bus].volt = valueDict[key]
elif signalType == 'ANGL':
ResultsDict[bus].angle = valueDict[key]
elif signalType == 'FREQ':
ResultsDict[bus].freq = valueDict[key]
EventsDict[eventStr] = ResultsDict
simCount += 1
print 'Simulation ' + str(simCount) + ' out of ' + str(
totalSims)
# Uncomment next two lines if you want to see the output
#with open('output'+str(k) + '.txt','w') as f:
# f.write(outputStr)
k += 1
save_obj(EventsDict, 'EventData')
except Exception:
traceback.print_exc(file=logfile)
sys.exit(0)
def run_savnw_simulation(datapath, outfile1, outfile2, outfile3, prgfile):
import psspy
psspy.psseinit()
savfile = 'savcnv.sav'
snpfile = 'savnw.snp'
if datapath:
savfile = os.path.join(datapath, savfile)
snpfile = os.path.join(datapath, snpfile)
psspy.lines_per_page_one_device(1,90)
psspy.progress_output(2,prgfile,[0,0]) # directly output to file
ierr = psspy.case(savfile)
if ierr:
psspy.progress_output(1,"",[0,0])
print(" psspy.case Error")
return
ierr = psspy.rstr(snpfile)
if ierr:
psspy.progress_output(1,"",[0,0])
print(" psspy.rstr Error")
return
# fault + line trip
psspy.strt(0,outfile1)
psspy.chsb(0,1, [-1,-1,-1,1,13,0])
psspy.run(0, 1.0,1000,1,0)# start from 1 second, 1000 steps, and 1 writing for 1 output step
psspy.dist_bus_fault(154,1, 230.0,[0.0,-0.2E+10]) # ibus, units, voltage kv
psspy.run(0, 1.1,1000,1,0)# start from 1.1 second, 1000 steps, and 1 writing for 1 output step
psspy.dist_clear_fault(1)
psspy.dist_branch_trip(3005,3007,'1')
psspy.run(0,1.2,1000,1,0)
psspy.dist_machine_trip(3018,'1')
psspy.run(0, 5.0,1000,1,0)
# line trip (with faults) + generator trip
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0,outfile2)
psspy.chsb(0,1, [-1,-1,-1,1,13,0])
psspy.run(0, 1.0,1000,1,0)
psspy.dist_bus_fault(3005,1,230.0,[0.0,-0.2E+10])
psspy.run(0,1.1,1000,1,0)
psspy.dist_clear_fault(1)
psspy.run(0,1.2,1000,1,0)
psspy.dist_machine_trip(3018,'1')
psspy.run(0, 5.0,1000,1,0)
psspy.case(savfile)
psspy.rstr(snpfile)
psspy.strt(0,outfile3)
psspy.chsb(0,1, [-1,-1,-1,1,13,0])
psspy.run(0, 1.0,1000,1,0)
psspy.dist_branch_trip(3005,3007,'1')
psspy.run(0, 5.0,1000,1,0)
psspy.lines_per_page_one_device(2,10000000)
psspy.progress_output(1,"",[0,0])
def clearDisturbance(self):
psspy.dist_clear_fault(1)
def runPSSESimBatches(simList, dyrFile, objName):
import sys, os
# add psspy to the system path
sys.path.append(r"C:\Program Files (x86)\PTI\PSSE33\PSSBIN")
os.environ['PATH'] = (r"C:\Program Files (x86)\PTI\PSSE33\PSSBIN;" +
os.environ['PATH'])
from contextlib import contextmanager
import StringIO
from getBusDataFn import getBusData
@contextmanager
def silence(file_object=None):
#Discard stdout (i.e. write to null device) or
#optionally write to given file-like object.
if file_object is None:
file_object = open(os.devnull, 'w')
old_stdout = sys.stdout
try:
sys.stdout = file_object
yield
finally:
sys.stdout = old_stdout
if file_object is None:
file_object.close()
# Local imports
import redirect
import psspy
import dyntools
# getting the raw file
##### Get everything set up on the PSSE side
redirect.psse2py()
#output = StringIO.StringIO()
with silence():
psspy.psseinit(buses=80000)
_i = psspy.getdefaultint()
_f = psspy.getdefaultreal()
_s = psspy.getdefaultchar()
# some important parameters
FaultRpu = 1e-06
Sbase = 100.0
EventsDict = {}
for event in simList:
eventWords = event.split('/')
RawFileIndicator = eventWords[0].strip()
linesOutage = eventWords[1].strip()
FaultBus = eventWords[2].strip()[
1:] # exclude the 'F' at the beginning
# get the raw file
if RawFileIndicator == '100':
rawFile = 'savnw_conp.raw'
else:
rawFile = 'savnw_conp{}.raw'.format(RawFileIndicator)
#Parameters. CONFIGURE THIS
settings = {
# use the same raw data in PSS/E and TS3ph #####################################
'filename':
rawFile, #use the same raw data in PSS/E and TS3ph
################################################################################
'dyr_file':
dyrFile,
'out_file':
'output2.out',
'pf_options': [
0, #disable taps
0, #disable area exchange
0, #disable phase-shift
0, #disable dc-tap
0, #disable switched shunts
0, #do not flat start
0, #apply var limits immediately
0, #disable non-div solution
]
}
output = StringIO.StringIO()
with silence(output):
ierr = psspy.read(0, settings['filename'])
#This is for the power flow. I'll use the solved case instead
ierr = psspy.fnsl(settings['pf_options'])
##### Prepare case for dynamic simulation
# Load conversion (multiple-step)
psspy.conl(_i, _i, 1, [0, _i], [_f, _f, _f, _f])
# all constant power load to constant current, constant reactive power load to constant admittance
# standard practice for dynamic simulations, constant MVA load is not acceptable
psspy.conl(1, 1, 2, [_i, _i], [100.0, 0.0, 0.0, 100.0])
psspy.conl(_i, _i, 3, [_i, _i], [_f, _f, _f, _f])
ierr = psspy.cong(0) #converting generators
ierr = psspy.ordr(0) #order the network nodes to maintain sparsity
ierr = psspy.fact() #factorise the network admittance matrix
ierr = psspy.tysl(0) #solving the converted case
ierr = psspy.dynamicsmode(0) #enter dynamics mode
print "\n Reading dyr file:", settings['dyr_file']
ierr = psspy.dyre_new([1, 1, 1, 1], settings['dyr_file'])
ierr = psspy.docu(
0, 1, [0, 3, 1]) #print the starting point of state variables
# select time step ##############################################################
ierr = psspy.dynamics_solution_params(
[_i, _i, _i, _i, _i, _i, _i, _i],
[_f, _f, 0.00833333333333333, _f, _f, _f, _f, _f],
'out_file') # the number here is the time step
################################################################################
##### select channels
ierr = psspy.delete_all_plot_channels() # clear channels
BusDataDict = getBusData(rawFile)
# get all the bus voltages, angles and frequencies
for bus in BusDataDict:
bus = int(bus)
ierr = psspy.voltage_and_angle_channel([-1, -1, -1, bus])
ierr = psspy.bus_frequency_channel([-1, bus])
print 'Event: {}'.format(event)
# get the nominal voltages as well as the fault impedance in ohms
FaultBusNomVolt = float(BusDataDict[str(FaultBus)].NominalVolt)
Zbase = FaultBusNomVolt**2 / Sbase # float since Sbase is a float
Rohm = FaultRpu * Zbase # fault impedance in ohms
# run simulation till just before the fault
ResultsDict = {}
# get the line params
line1Elements = linesOutage.split(';')[0].strip()
line2Elements = linesOutage.split(';')[1].strip()
# Line 1 params
line1 = line1Elements.split(',')
L1Bus1 = int(line1[0].strip())
L1Bus2 = int(line1[1].strip())
L1cktID = line1[2].strip("'").strip()
#print L1Bus1
#print L1Bus2
#print L1cktID
# Line 2 params
line2 = line2Elements.split(',')
L2Bus1 = int(line2[0].strip())
L2Bus2 = int(line2[1].strip())
L2cktID = line2[2].strip("'").strip()
#print L2Bus1
#print L2Bus2
#print L2cktID
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.strt(0, settings['out_file'])
ierr = psspy.run(0, 0.1, 1, 1, 1)
ierr = psspy.dist_branch_trip(L1Bus1, L1Bus2, L1cktID)
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(0, 0.2, 1, 1, 1) #fault on time
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + event + ':'
print 'Network did not converge between branch 1 trip and fault application, skipping...'
continue
#######
# check for convergence during fault
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.dist_bus_fault(int(FaultBus), 3, 0.0, [Rohm, 0.0])
ierr = psspy.run(0, 0.3, 1, 1, 1) #fault off time
ierr = psspy.dist_clear_fault(1)
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + event + ':'
print 'Network did not converge during fault, skipping...'
continue
# check for convergence between fault clearance and second branch trip
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(0, 0.31, 1, 1, 1) #fault off time
ierr = psspy.dist_branch_trip(L2Bus1, L2Bus2, L2cktID)
ierr = psspy.run(0, 0.35, 1, 1, 1) #fault off time
# check for non-convergence
#output = StringIO.StringIO()
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + event + ':'
print 'Network did not converge between fault clearance and branch 2 trip, skipping...'
continue
# select run time ##############################################################
#output = StringIO.StringIO()
with silence(output):
ierr = psspy.run(0, 10.0, 1, 1,
1) #exit time (second argument is the end time)
################################################################################
# check for non-convergence
outputStr = output.getvalue()
if "Network not converged" in outputStr:
print 'For ' + event + ':'
print 'Network did not converge sometime after 2nd branch trip, skipping...'
continue
# write to output file
#with open('outputTmp.txt','w') as f:
# f.write(outputStr)
outputData = dyntools.CHNF(settings['out_file'])
data = outputData.get_data()
channelDict = data[
1] # dictionary where the value is the channel description
valueDict = data[
2] # dictionary where the values are the signal values, keys match that of channelDict
tme = valueDict['time'] # get time
ResultsDict['time'] = tme
for key in channelDict:
if key == 'time':
continue
signalDescr = channelDict[key]
words = signalDescr.split()
signalType = words[0].strip()
bus = words[1].strip()
#print Bus + ' ' + signalType
if bus not in ResultsDict:
ResultsDict[bus] = Results()
if signalType == 'VOLT':
ResultsDict[bus].volt = valueDict[key]
elif signalType == 'ANGL':
ResultsDict[bus].angle = valueDict[key]
elif signalType == 'FREQ':
ResultsDict[bus].freq = valueDict[key]
EventsDict[event] = ResultsDict
return EventsDict
def run_savnw_simulation(datapath, outfile1, outfile2, outfile3, prgfile):
_F1_start=100
_F1_end=100+70*1/60.0;
_F2_start = 300
_F2_end = 400;
_runto=300;
import psspy
psspy.psseinit()
savfile = 'IEEE 9 Bus_modifiedj4ab.sav'
snpfile = 'IEEE 9 Bus_modifiedj4ab.snp'
_i = psspy.getdefaultint()
_f = psspy.getdefaultreal()
_s = psspy.getdefaultchar()
INTGAR = [_i] * 7
REALAR = [_f] * 8
if datapath:
savfile = os.path.join(datapath, savfile)
snpfile = os.path.join(datapath, snpfile)
psspy.lines_per_page_one_device(1,90)
psspy.progress_output(2,prgfile,[0,0]) #Use this API to specify the progress output device.
ierr = psspy.case(savfile) #Use this API to open a PSSE Saved Case file and transfers its data into the PSSE working case
if ierr:
psspy.progress_output(1,"",[0,0])
print(" psspy.case Error")
return
ierr = psspy.rstr(snpfile)#Use this API to read a dynamics Snapshot File into PSSE working memory (activity RSTR).
if ierr:
psspy.progress_output(1,"",[0,0])
print(" psspy.rstr Error")
return
psspy.strt(0,outfile1) #strt(option, outfile) #Use this API to initialize a PSSE dynamic simulation for state-space simulations (i.e., in preparation for activity RUN) and to specify the Channel Output File into which the output channel values are to be recorded during the dynamic simulation (activity STRT).
psspy.run(0, _F1_start,5000,1,0) #Use this API to calculate PSSE state-space dynamic simulations (activity RUN).
#psspy.dist_bus_fault(8,1, 230.0,[0.0,-0.2E+10]) #Use this API routine to apply a fault at a bus during dynamic simulations. (Note: use DIST_BUS_FAULT_2 if phase voltages are to be calculated during the simulation.)
businfo = subsystem_info('bus', ['NUMBER', 'NAME', 'PU'], sid=-1)
print businfo
psspy.dist_branch_fault(8,9, '1',3,0.0,[0.0,0.000001])
##psspy.dist_branch_trip(8, 7, '1')
##psspy.load_chng_5(11, r"""1""", [0, _i, _i, _i, _i, _i, _i], [_f, _f, _f, _f, _f, _f, _f, _f])
businfo = subsystem_info('bus', ['NUMBER', 'NAME', 'PU'], sid=-1)
print businfo
psspy.run(0, _F1_end+1.5*1/60,5000,1,0)
businfo = subsystem_info('bus', ['NUMBER', 'NAME', 'PU'], sid=-1)
print businfo
#psspy.dist_branch_close(8,7,'1')
## psspy.load_chng_5(11, r"""1""", [1, _i, _i, _i, _i, _i, _i], [_f, _f, _f, _f, _f, _f, _f, _f])
psspy.dist_clear_fault(1)
psspy.run(0, _F1_end+2.0, 5000, 1, 0)
businfo = subsystem_info('bus', ['NUMBER', 'NAME', 'PU'], sid=-1)
print businfo
#psspy.dist_clear_fault(1) #Use this API to clear a fault during dynamic simulations. The fault must have previously been applied using one of the following APIs:
psspy.run(0, _runto,5000,1,0)
#trigger machine
# psspy.case(savfile) #Use this API to open a PSSE Saved Case file and transfers its data into the PSSE working case
# psspy.rstr(snpfile) #Use this API to read a dynamics Snapshot File into PSSE working memory (activity RSTR).
# psspy.strt(0,outfile2)
# psspy.run(0, 1.0,1000,1,0)
# psspy.dist_machine_trip(2,'1')
# psspy.run(0, 10.0,1000,1,0)
#trigger line
# psspy.case(savfile)
# psspy.rstr(snpfile)
# psspy.strt(0,outfile3)
# psspy.run(0, 1.0,1000,1,0)
# psspy.dist_branch_trip(7,8,'1')
# psspy.run(0, 10.0,1000,1,0)
psspy.lines_per_page_one_device(2,10000000)
psspy.progress_output(1,"",[0,0])
def do_simulation():
global num_sample_id
# set Samples Path
sample_path = r'./Sample_9bus_' + input('请输入样本集编号：')
if os.path.exists(sample_path):
print('该样本集已存在，请重新输入...\n')
sample_path = r'./Sample_9bus_' + input('请重新输入样本集编号：')
else:
os.makedirs(sample_path)
# # 1 母线故障——样本编号：1~12*num_bus -> [1, 108]
# for i in range(num_bus):
# # for i in range(1):
# for j in range(len(clear_time)):
# # init
# psspy.psseinit(50)
# psspy.case(r""".\Models\9Bus-test\ieee9bus_v32.sav""")
# psspy.fnsl([0, 0, 0, 1, 1, 0, 99, 0])
# psspy.cong(0)
# psspy.conl(0, 1, 1, [0, 0], [100.0, 0.0, 0.0, 100.0])
# psspy.conl(0, 1, 2, [0, 0], [100.0, 0.0, 0.0, 100.0])
# psspy.conl(0, 1, 3, [0, 0], [100.0, 0.0, 0.0, 100.0])
# psspy.fact()
# psspy.tysl(0)
# psspy.dyre_new([1, 1, 1, 1], r""".\Models\9Bus-test\ieee9bus.dyr""", "", "", "")
#
# # perform Dynamic Simulation
# # 1) set "Channal Setup Wizard"
# psspy.chsb(0, 1, [-1, -1, -1, 1, 1, 0]) # Angle
# psspy.chsb(0, 1, [-1, -1, -1, 1, 7, 0]) #
# psspy.chsb(0, 1, [-1, -1, -1, 1, 13, 0]) #
#
# # 2) name output file
# psspy.set_chnfil_type(0) # 1 for OUTX format, 0 for (old) OUT format
# psspy.strt_2([0, 1], sample_path + '\\t9Bus-PY-00' + str(num_sample_id) + '.out')
# num_sample_id += 1
#
# # 3) in normal stat, run network to 1 seconds
# psspy.run(0, 1.0, 0, 1, 1)
#
# # 4) set Balanced_bus_fault with R,X -> [0, 0]
# psspy.dist_bus_fault(bus_id[i], 1, bus_kv[i], [0.0, -2E+2]) # -------- ! important
#
# # 5) set fault run time
# psspy.run(0, 1 + clear_time[j], 0, 1, 1)
#
# # 6) clear fault, and run net to 10 seconds
# psspy.dist_clear_fault(1)
# psspy.run(0, 10.0, 0, 1, 1)
#
# # 7) 关闭本次仿真相关的文件, importaant !!!!!!!!!!!!!!!!!!!!!!
# psspy.pssehalt_2()
# 2 非变压器支路故障——样本编号： [108+1, 108+360]
for i in range(num_notrans_brch):
# for i in range(1):
for k in range(len(fault_position)):
# for k in range(1):
for j in range(len(clear_time)):
print('\n\n\n\n----------------我是分割线--------------\n')
print('已仿真第 ' + str(num_sample_id) + ' 条样本\n\n\n\n')
# init
psspy.psseinit(50)
psspy.case(r""".\Models\9Bus-test\ieee9bus_v32.sav""")
psspy.fnsl([0, 0, 0, 1, 1, 0, 99, 0])
psspy.cong(0)
psspy.conl(0, 1, 1, [0, 0], [100.0, 0.0, 0.0, 100.0])
psspy.conl(0, 1, 2, [0, 0], [100.0, 0.0, 0.0, 100.0])
psspy.conl(0, 1, 3, [0, 0], [100.0, 0.0, 0.0, 100.0])
psspy.fact()
psspy.tysl(0)
psspy.dyre_new([1, 1, 1, 1],
r""".\Models\9Bus-test\ieee9bus.dyr""", "", "",
"")
# perform Dynamic Simulation
# 1) set "Channal Setup Wizard"
psspy.chsb(0, 1, [-1, -1, -1, 1, 1, 0]) # Angle
psspy.chsb(0, 1, [-1, -1, -1, 1, 7, 0]) #
psspy.chsb(0, 1, [-1, -1, -1, 1, 13, 0]) #
# 1.1) set Relative Machine Angle
psspy.set_relang(1, 1, r"""1""")
# 2) name output file
psspy.set_chnfil_type(
0) # 1 for OUTX format, 0 for (old) OUT format
psspy.strt_2([0, 1], sample_path + '//t9Bus-PY-00' +
str(num_sample_id) + '.out')
num_sample_id += 1
# 3) in normal stat, run network to 1 seconds
psspy.run(0, 1.0, 0, 1, 1)
# 4) set unbalanced_Branch_fault -- 3 Phase -- with R,X -> [0, 0]
psspy.dist_spcb_fault_2(
notrans_brch[i][0], notrans_brch[i][1], r"""1""",
[3, 0, 3, 1, 0, 0, 1],
[fault_position[k], 0.0, 0.0, 0.0, 0.0
]) # -------- ! important
# 5) set fault run time
psspy.run(0, 1 + clear_time[j], 0, 1, 1)
# 6) clear fault, and run net to 10 seconds
psspy.dist_clear_fault(1)
psspy.run(0, 10.0, 0, 1, 1)
# 7) 关闭本次仿真相关的文件, importaant !!!!!!!!!!!!!!!!!!!!!!
psspy.pssehalt_2()
def do_simulation(sav_path, dyr_path):
global num_sample_id
# set Samples Path
sample_path = r'./Sample_14bus_' + input('请输入样本集编号：')
if os.path.exists(sample_path):
print('该样本集已存在，请重新输入...\n')
sample_path = r'./Sample_14bus_' + input('请重新输入样本集编号：')
else:
os.makedirs(sample_path)
# # 1 母线故障——样本编号：1~12*num_bus -> [1, 168]
# for i in range(num_bus):
# # for i in range(1):
# for j in range(len(clear_time)):
# # init
# psspy.psseinit(50)
# psspy.case(sav_path)
# psspy.fnsl([0, 0, 0, 1, 1, 0, 99, 0])
# psspy.cong(0)
# psspy.conl(0, 1, 1, [0, 0], [100.0, 0.0, 0.0, 100.0])
# psspy.conl(0, 1, 2, [0, 0], [100.0, 0.0, 0.0, 100.0])
# psspy.conl(0, 1, 3, [0, 0], [100.0, 0.0, 0.0, 100.0])
# psspy.fact()
# psspy.tysl(0)
# psspy.dyre_new([1, 1, 1, 1], dyr_path, "", "", "")
#
# # perform Dynamic Simulation
# # 1) set "Channal Setup Wizard"
# psspy.chsb(0, 1, [-1, -1, -1, 1, 1, 0]) # Angle -> 发电机功角
# psspy.chsb(0, 1, [-1, -1, -1, 1, 14, 0]) # Volt & Angle -> 电压&相角
# psspy.chsb(0, 1, [-1, -1, -1, 1, 16, 0]) # Flow (P & Q) -> 潮流
#
# # 2) name output file
# psspy.set_chnfil_type(0) # 1 for OUTX format, 0 for (old) OUT format
# psspy.strt_2([0, 1], sample_path + '\\t14Bus-PY-00' + str(num_sample_id) + '.out')
# num_sample_id += 1
#
# # 3) in normal stat, run network to 1 seconds
# psspy.run(0, 1.0, 0, 1, 1)
#
# # 4) set Balanced_bus_fault; Default with R,X -> [0, -2e+009]
# psspy.dist_bus_fault(bus_id[i], 1, bus_kv[i], [0.0, -2E9]) # -------- ! important
#
# # bus5 unbalanced fault with [R-LL, X-LL, R-LG, X-LG], 是单相故障 !!!!!!!
# # 事实证明设置LL的RX对稳定毫无影响！！
# # psspy.dist_scmu_fault_2([0, 0, 2, bus_id[i], ], [2E5, 3E5, 0, 0])
#
# # 5) set fault run time
# psspy.run(0, 1 + clear_time[j], 0, 1, 1)
#
# # 5) clear fault, and run net to 10 seconds
# psspy.dist_clear_fault(1)
# psspy.run(0, 10.0, 0, 1, 1)
# 2 非变压器支路故障——样本编号： [bus_id ,bus_id + 960]
# 根据本循环写的嵌套次序，故障时间每12条仿真为一个循环
# for i in range(num_notrans_brch):
for i in range(1):
# for k in range(len(fault_position)):
for k in range(3):
# for j in range(len(clear_time)):
for j in range(12):
print('\n\n\n\n----------------我是分割线--------------\n\n\n\n\n')
print('已仿真第 ' + str(num_sample_id) + ' 条样本')
# init
psspy.psseinit(10)
psspy.case(sav_path)
psspy.fnsl([0, 0, 0, 1, 1, 0, 99, 0])
psspy.cong(0)
psspy.conl(0, 1, 1, [0, 0], [100.0, 0.0, 0.0, 100.0])
psspy.conl(0, 1, 2, [0, 0], [100.0, 0.0, 0.0, 100.0])
psspy.conl(0, 1, 3, [0, 0], [100.0, 0.0, 0.0, 100.0])
psspy.fact()
psspy.tysl(0)
psspy.dyre_new([1, 1, 1, 1], dyr_path, "", "", "")
# perform Dynamic Simulation
# 1) set "Channal Setup Wizard"
psspy.chsb(0, 1, [-1, -1, -1, 1, 1, 0]) # Angle -> 发电机功角
psspy.chsb(0, 1,
[-1, -1, -1, 1, 14, 0]) # Volt & Angle -> 电压&相角
psspy.chsb(0, 1, [-1, -1, -1, 1, 16, 0]) # Flow (P & Q) -> 潮流
# 2) name output file
psspy.set_chnfil_type(
0) # 1 for OUTX format, 0 for (old) OUT format
psspy.strt_2([0, 1], sample_path + '\\t14Bus-PY-00' +
str(num_sample_id) + '.out')
num_sample_id += 1
# 3) in normal stat, run network to 1 seconds
psspy.run(0, 1.0, 0, 1, 1)
# 4) set unbalanced_Branch_fault -- 3 Phase -- with R,X -> [0, 0]
psspy.dist_spcb_fault_2(
notrans_brch[i][0], notrans_brch[i][1], r"""1""",
[3, 0, 3, 1, 0, 0, 1],
[fault_position[k], 0.0, 0.0, 0.0, 0.0
]) # -------- ! important
# 5) set fault run time
psspy.run(0, 1 + clear_time[j], 0, 1, 1)
# 6) clear fault, and run net to 10 seconds
psspy.dist_clear_fault(1)
psspy.run(0, 10.0, 0, 1, 1)
# 7) 关闭本次仿真相关的文件, importaant !!!!!!!!!!!!!!!!!!!!!!
psspy.pssehalt_2()
