def load_shape(filepath, contact_method, texture):
"""
Import the mesh stored in filepath as a shape
:param filepath: Path to the mesh
:param contact_method: SMC or NSC
:param texture: Path to the texture .jpg
:return: A ChBody shape
"""
shape = chrono.ChBody(contact_method)
shape.SetBodyFixed(True)
shape_mesh = chrono.ChObjShapeFile()
shape_mesh.SetFilename(filepath)
shape.AddAsset(shape_mesh)
tmc = chrono.ChTriangleMeshConnected()
tmc.LoadWavefrontMesh(filepath)
# Add a collision mesh to the shape
shape.GetCollisionModel().ClearModel()
shape.GetCollisionModel().AddTriangleMesh(tmc, True, True)
shape.GetCollisionModel().BuildModel()
shape.SetShowCollisionMesh(True)
shape.SetCollide(False)
# Add a skin texture
skin_texture = chrono.ChTexture()
skin_texture.SetTextureFilename(chrono.GetChronoDataPath() + texture)
shape.GetAssets().push_back(skin_texture)
return shape
def CreateTerrain(sys, length, width, height, offset):
ground_mat = chrono.ChMaterialSurface.DefaultMaterial(
sys.GetContactMethod())
ground_mat.SetFriction(0.8)
ground_mat.SetRestitution(0)
if sys.GetContactMethod() == chrono.ChContactMethod_SMC:
matSMC = chrono.CastToChMaterialSurfaceSMC(ground_mat)
matSMC.SetYoungModulus(1e7)
ground = robot.GetSystem().NewBody()
ground.SetBodyFixed(True)
ground.SetCollide(True)
ground.GetCollisionModel().ClearModel()
ground.GetCollisionModel().AddBox(
ground_mat, length / 2, width / 2, 0.1,
chrono.ChVectorD(offset, 0, height - 0.1))
ground.GetCollisionModel().BuildModel()
box = chrono.ChBoxShape()
box.GetBoxGeometry().Size = chrono.ChVectorD(length / 2, width / 2, 0.1)
box.GetBoxGeometry().Pos = chrono.ChVectorD(offset, 0, height - 0.1)
ground.AddAsset(box)
texture = chrono.ChTexture()
texture.SetTextureFilename(
chrono.GetChronoDataFile("textures/pinkwhite.png"))
texture.SetTextureScale(10 * length, 10 * width)
ground.AddAsset(texture)
ground.AddAsset(chrono.ChColorAsset(0.8, 0.8, 0.8))
sys.AddBody(ground)
return ground
def reset(self):
self.isdone = False
self.ant_sys.Clear()
self.body_abdomen = chrono.ChBody()
self.body_abdomen.SetPos(chrono.ChVectorD(0, self.abdomen_y0, 0 ))
self.body_abdomen.SetMass(self.abdomen_mass)
self.body_abdomen.SetInertiaXX(self.abdomen_inertia)
# set collision surface properties
self.body_abdomen.SetMaterialSurface(self.ant_material)
abdomen_ellipsoid = chrono.ChEllipsoid(chrono.ChVectorD(0, 0, 0 ), chrono.ChVectorD(self.abdomen_x, self.abdomen_y, self.abdomen_z ))
self.abdomen_shape = chrono.ChEllipsoidShape(abdomen_ellipsoid)
self.body_abdomen.AddAsset(self.abdomen_shape)
self.body_abdomen.SetMaterialSurface(self.ant_material)
self.body_abdomen.SetCollide(True)
self.body_abdomen.GetCollisionModel().ClearModel()
self.body_abdomen.GetCollisionModel().AddEllipsoid(self.abdomen_x, self.abdomen_y, self.abdomen_z, chrono.ChVectorD(0, 0, 0 ) )
self.body_abdomen.GetCollisionModel().BuildModel()
self.ant_sys.Add(self.body_abdomen)
leg_ang = (1/4)*math.pi+(1/2)*math.pi*np.array([0,1,2,3])
Leg_quat = [chrono.ChQuaternionD() for i in range(len(leg_ang))]
self.leg_body = [chrono.ChBody() for i in range(len(leg_ang))]
self.leg_pos= [chrono.ChVectorD() for i in range(len(leg_ang))]
leg_cyl = chrono.ChCylinder(-chrono.ChVectorD( self.leg_length/2, 0 ,0),chrono.ChVectorD( self.leg_length/2, 0 ,0), self.leg_radius)
self.leg_shape = chrono.ChCylinderShape(leg_cyl)
ankle_cyl = chrono.ChCylinder(-chrono.ChVectorD( self.ankle_length/2, 0 ,0),chrono.ChVectorD( self.ankle_length/2, 0 ,0), self.ankle_radius)
self.ankle_shape = chrono.ChCylinderShape(ankle_cyl)
foot_sphere = chrono.ChSphere(chrono.ChVectorD(self.ankle_length/2, 0, 0 ), self.ankle_radius )
self.foot_shape = chrono.ChSphereShape(foot_sphere)
Leg_qa = [ chrono.ChQuaternionD() for i in range(len(leg_ang))]
Leg_q = [ chrono.ChQuaternionD() for i in range(len(leg_ang))]
z2x_leg = [ chrono.ChQuaternionD() for i in range(len(leg_ang))]
Leg_rev_pos=[]
Leg_chordsys = []
self.legjoint_frame = []
x_rel = []
z_rel = []
self.Leg_rev = [chrono.ChLinkLockRevolute() for i in range(len(leg_ang))]
self.leg_motor = [chrono.ChLinkMotorRotationTorque() for i in range(len(leg_ang)) ]
#ankle lists
anklejoint_chordsys = []
self.anklejoint_frame = []
self.ankleCOG_frame = []
q_ankle_zrot = [ chrono.ChQuaternionD() for i in range(len(leg_ang))]
self.ankle_body = [chrono.ChBody() for i in range(len(leg_ang))]
self.Ankle_rev = [chrono.ChLinkLockRevolute() for i in range(len(leg_ang))]
self.ankle_motor = [chrono.ChLinkMotorRotationTorque() for i in range(len(leg_ang)) ]
for i in range(len(leg_ang)):
# Legs
Leg_quat[i].Q_from_AngAxis(-leg_ang[i] , chrono.ChVectorD(0, 1, 0))
self.leg_pos[i] = chrono.ChVectorD( (0.5*self.leg_length+self.abdomen_x)*math.cos(leg_ang[i]) ,self.abdomen_y0, (0.5*self.leg_length+self.abdomen_z)*math.sin(leg_ang[i]))
self.leg_body[i].SetPos(self.leg_pos[i])
self.leg_body[i].SetRot(Leg_quat[i])
self.leg_body[i].AddAsset(self.leg_shape)
self.leg_body[i].SetMass(self.leg_mass)
self.leg_body[i].SetInertiaXX(self.leg_inertia)
self.ant_sys.Add(self.leg_body[i])
x_rel.append( Leg_quat[i].Rotate(chrono.ChVectorD(1, 0, 0)))
z_rel.append( Leg_quat[i].Rotate(chrono.ChVectorD(0, 0, 1)))
Leg_qa[i].Q_from_AngAxis(-leg_ang[i] , chrono.ChVectorD(0, 1, 0))
z2x_leg[i].Q_from_AngAxis(chrono.CH_C_PI / 2 , x_rel[i])
Leg_q[i] = z2x_leg[i] * Leg_qa[i]
Leg_rev_pos.append(chrono.ChVectorD(self.leg_pos[i]-chrono.ChVectorD(math.cos(leg_ang[i])*self.leg_length/2,0,math.sin(leg_ang[i])*self.leg_length/2)))
Leg_chordsys.append(chrono.ChCoordsysD(Leg_rev_pos[i], Leg_q[i]))
self.legjoint_frame.append(chrono.ChFrameD(Leg_chordsys[i]))
self.Leg_rev[i].Initialize(self.body_abdomen, self.leg_body[i],Leg_chordsys[i])
self.ant_sys.Add(self.Leg_rev[i])
self.leg_motor[i].Initialize(self.body_abdomen, self.leg_body[i],self.legjoint_frame[i])
self.ant_sys.Add(self.leg_motor[i])
# Ankles
q_ankle_zrot[i].Q_from_AngAxis(-self.ankle_angle , z_rel[i])
anklejoint_chordsys.append(chrono.ChCoordsysD(self.leg_body[i].GetPos()+ self.leg_body[i].GetRot().Rotate(chrono.ChVectorD(self.leg_length/2, 0, 0)) , q_ankle_zrot[i] * self.leg_body[i].GetRot() ))
self.anklejoint_frame.append(chrono.ChFrameD(anklejoint_chordsys[i]))
self.ankle_body[i].SetPos(self.anklejoint_frame[i].GetPos() + self.anklejoint_frame[i].GetRot().Rotate(chrono.ChVectorD(self.ankle_length/2, 0, 0)))
self.ankle_body[i].SetRot( self.anklejoint_frame[i].GetRot() )
self.ankle_body[i].AddAsset(self.ankle_shape)
self.ankle_body[i].SetMass(self.ankle_mass)
self.ankle_body[i].SetInertiaXX(self.ankle_inertia)
self.ant_sys.Add(self.ankle_body[i])
self.Ankle_rev[i].Initialize(self.leg_body[i], self.ankle_body[i], anklejoint_chordsys[i])
self.ant_sys.Add(self.Ankle_rev[i])
self.ankle_motor[i].Initialize(self.leg_body[i], self.ankle_body[i],self.anklejoint_frame[i])
self.ant_sys.Add(self.ankle_motor[i])
# Feet collisions
self.ankle_body[i].SetMaterialSurface(self.ant_material)
self.ankle_body[i].SetCollide(True)
self.ankle_body[i].GetCollisionModel().ClearModel()
self.ankle_body[i].GetCollisionModel().AddSphere(self.ankle_radius, chrono.ChVectorD(self.ankle_length/2, 0, 0 ) )
self.ankle_body[i].GetCollisionModel().BuildModel()
self.ankle_body[i].AddAsset(self.ankle_shape)
self.ankle_body[i].AddAsset(self.foot_shape)
self.Leg_rev[i].GetLimit_Rz().SetActive(True)
self.Leg_rev[i].GetLimit_Rz().SetMin(-math.pi/3)
self.Leg_rev[i].GetLimit_Rz().SetMax(math.pi/3)
self.Ankle_rev[i].GetLimit_Rz().SetActive(True)
self.Ankle_rev[i].GetLimit_Rz().SetMin(-math.pi/2)
self.Ankle_rev[i].GetLimit_Rz().SetMax(math.pi/4)
# Create the room floor: a simple fixed rigid body with a collision shape
# and a visualization shape
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(chrono.ChVectorD(0, -1, 0 ))
self.body_floor.SetMaterialSurface(self.ant_material)
# Floor Collision.
self.body_floor.SetMaterialSurface(self.ant_material)
self.body_floor.GetCollisionModel().ClearModel()
self.body_floor.GetCollisionModel().AddBox(50, 1, 50, chrono.ChVectorD(0, 0, 0 ))
self.body_floor.GetCollisionModel().BuildModel()
self.body_floor.SetCollide(True)
# Visualization shape
body_floor_shape = chrono.ChBoxShape()
body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(5, 1, 5)
body_floor_shape.SetColor(chrono.ChColor(0.4,0.4,0.5))
self.body_floor.GetAssets().push_back(body_floor_shape)
body_floor_texture = chrono.ChTexture()
body_floor_texture.SetTextureFilename(chrono.GetChronoDataFile('vehicle/terrain/textures/grass.jpg'))
self.body_floor.GetAssets().push_back(body_floor_texture)
self.ant_sys.Add(self.body_floor)
#self.body_abdomen.SetBodyFixed(True)
if (self.animate):
self.myapplication.AssetBindAll()
self.myapplication.AssetUpdateAll()
self.numsteps= 0
self.step(np.zeros(8))
return self.get_ob()
# Contact material shared among all bodies
mat = chrono.ChMaterialSurfaceNSC()
# Create all rigid bodies.
radA = 2
radB = 4
# ...the truss
mbody_truss = chrono.ChBodyEasyBox(20, 10, 2, 1000, True, False, mat)
mphysicalSystem.Add(mbody_truss)
mbody_truss.SetBodyFixed(True)
mbody_truss.SetPos(chrono.ChVectorD(0, 0, 3))
# ...a texture asset that will be shared among the four wheels
cylinder_texture = chrono.ChTexture(
chrono.GetChronoDataFile("textures/pinkwhite.png"))
# ...the rotating bar support for the two epicycloidal wheels
mbody_train = chrono.ChBodyEasyBox(8, 1.5, 1.0, 1000, True, False, mat)
mphysicalSystem.Add(mbody_train)
mbody_train.SetPos(chrono.ChVectorD(3, 0, 0))
# ...which must rotate respect to truss along Z axis, in 0,0,0
link_revoluteTT = chrono.ChLinkLockRevolute()
link_revoluteTT.Initialize(
mbody_truss, mbody_train,
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0), chrono.QUNIT))
mphysicalSystem.AddLink(link_revoluteTT)
# ...the first gear
mbody_gearA = chrono.ChBodyEasyCylinder(radA, 0.5, 1000, True, False, mat)
def reset(self):
self.isdone = False
self.hexapod_sys.Clear()
self.exported_items = chrono.ImportSolidWorksSystem(self.fpath)
self.csys = []
self.frames = []
self.revs = []
self.motors = []
self.limits = []
for con, coi in zip(self.con_link, self.coi_link):
indices = []
for i in range(len(self.exported_items)):
if con == self.exported_items[i].GetName(
) or coi == self.exported_items[i].GetName():
indices.append(i)
rev = self.exported_items[indices[0]]
af0 = rev.GetAssetsFrame()
# Revolute joints and ChLinkMotorRotation are z oriented, while parallel is x oriented.
# Event though this Frame won't be used anymore is good practice to create a copy before editing its value.
af = chrono.ChFrameD(af0)
af.SetRot(af0.GetRot() % chrono.Q_ROTATE_X_TO_Z)
self.frames.append(af)
for i in reversed(indices):
del self.exported_items[i]
# ADD IMPORTED ITEMS TO THE SYSTEM
for my_item in self.exported_items:
self.hexapod_sys.Add(my_item)
"""
$$$$$$$$ FIND THE SW DEFINED CONSTRAINTS, GET THEIR MARKERS AND GET RID OF EM $$$$$$$$
"""
self.hips = [
self.hexapod_sys.SearchBody(name) for name in self.hip_names
]
self.femurs = [
self.hexapod_sys.SearchBody(name) for name in self.femur_names
]
self.tibias = [
self.hexapod_sys.SearchBody(name) for name in self.tibia_names
]
self.feet = [
self.hexapod_sys.SearchBody(name) for name in self.feet_names
]
self.centralbody = self.hexapod_sys.SearchBody('Body-1')
# Bodies are used to replace constraints and detect unwanted collision, so feet are excluded
self.bodies = [self.centralbody
] + self.hips + self.femurs + self.tibias
self.centralbody.SetBodyFixed(False)
self.y0 = self.centralbody.GetPos().y
"""
# SNIPPET FOR COLOR
orange = chrono.ChColorAsset()
orange.SetColor(chrono.ChColor(255/255,77/255,6/255))
black = chrono.ChColorAsset()
black.SetColor(chrono.ChColor(0,0,0))
for body in self.bodies[:-1]:
assets = body.GetAssets()
for ast in assets:
ass_lev = chrono.CastToChAssetLevel(ast)
ass_lev.GetAssets().push_back(orange)
assets = self.hand.GetAssets()
for ast in assets:
ass_lev = chrono.CastToChAssetLevel(ast)
ass_lev.GetAssets().push_back(black)
"""
for i in range(len(self.con_link)):
revolute = chrono.ChLinkLockRevolute()
cs = chrono.ChCoordsysD(self.frames[i].GetPos(),
self.frames[i].GetRot())
self.csys.append(cs)
if i < 6:
j = 0
else:
j = i - 5
revolute.Initialize(self.bodies[j], self.bodies[i + 1],
self.csys[i])
self.revs.append(revolute)
self.hexapod_sys.Add(self.revs[i])
lim = self.revs[i].GetLimit_Rz()
self.limits.append(lim)
self.limits[i].SetActive(True)
self.limits[i].SetMin(self.minRot[i] * (math.pi / 180))
self.limits[i].SetMax(self.maxRot[i] * (math.pi / 180))
m = chrono.ChLinkMotorRotationTorque()
m.SetSpindleConstraint(False, False, False, False, False)
m.Initialize(self.bodies[j], self.bodies[i + 1], self.frames[i])
self.motors.append(m)
self.hexapod_sys.Add(self.motors[i])
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(chrono.ChVectorD(0, -1 - 0.128 - 0.0045, 10))
# Floor Collision.
self.body_floor.GetCollisionModel().ClearModel()
self.body_floor.GetCollisionModel().AddBox(self.my_material, 50, 1, 50,
chrono.ChVectorD(0, 0, 0))
self.body_floor.GetCollisionModel().BuildModel()
self.body_floor.SetCollide(True)
# Visualization shape
body_floor_shape = chrono.ChBoxShape()
body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(4, 1, 15)
body_floor_shape.SetColor(chrono.ChColor(0.4, 0.4, 0.5))
self.body_floor.GetAssets().push_back(body_floor_shape)
body_floor_texture = chrono.ChTexture()
texpath = os.path.join(chrono.GetChronoDataPath(), 'concrete.jpg')
body_floor_texture.SetTextureFilename(texpath)
self.body_floor.GetAssets().push_back(body_floor_texture)
self.hexapod_sys.Add(self.body_floor)
self.numsteps = 0
if (self.render_setup):
self.myapplication.AssetBindAll()
self.myapplication.AssetUpdateAll()
return self.get_ob()
def reset(self):
#print("reset")
self.isdone = False
self.rev_pend_sys.Clear()
# create it
self.body_rod = chrono.ChBody()
# set initial position
self.body_rod.SetPos(chrono.ChVectorD(0, self.size_rod_y / 2, 0))
# set mass properties
self.body_rod.SetMass(self.mass_rod)
self.body_rod.SetInertiaXX(
chrono.ChVectorD(self.inertia_rod_x, self.inertia_rod_y,
self.inertia_rod_x))
# set collision surface properties
self.body_rod.SetMaterialSurface(self.rod_material)
# Visualization shape, for rendering animation
self.cyl_base1 = chrono.ChVectorD(0, -self.size_rod_y / 2, 0)
self.cyl_base2 = chrono.ChVectorD(0, self.size_rod_y / 2, 0)
self.body_rod_shape = chrono.ChCylinderShape()
self.body_rod_shape.GetCylinderGeometry().p1 = self.cyl_base1
self.body_rod_shape.GetCylinderGeometry().p2 = self.cyl_base2
self.body_rod_shape.GetCylinderGeometry().rad = self.radius_rod
self.body_rod.AddAsset(self.body_rod_shape)
self.rev_pend_sys.Add(self.body_rod)
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(chrono.ChVectorD(0, -5, 0))
self.body_floor.SetMaterialSurface(self.rod_material)
if self.render:
self.body_floor_shape = chrono.ChBoxShape()
self.body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(
3, 1, 3)
self.body_floor.GetAssets().push_back(self.body_floor_shape)
self.body_floor_texture = chrono.ChTexture()
self.body_floor_texture.SetTextureFilename(
'../../../data/concrete.jpg')
self.body_floor.GetAssets().push_back(self.body_floor_texture)
self.rev_pend_sys.Add(self.body_floor)
self.body_table = chrono.ChBody()
self.body_table.SetPos(chrono.ChVectorD(0, -self.size_table_y / 2, 0))
self.body_table.SetMaterialSurface(self.rod_material)
if self.render:
self.body_table_shape = chrono.ChBoxShape()
self.body_table_shape.GetBoxGeometry().Size = chrono.ChVectorD(
self.size_table_x / 2, self.size_table_y / 2,
self.size_table_z / 2)
self.body_table_shape.SetColor(chrono.ChColor(0.4, 0.4, 0.5))
self.body_table.GetAssets().push_back(self.body_table_shape)
self.body_table_texture = chrono.ChTexture()
self.body_table_texture.SetTextureFilename(
'../../../data/concrete.jpg')
self.body_table.GetAssets().push_back(self.body_table_texture)
self.body_table.SetMass(0.1)
self.rev_pend_sys.Add(self.body_table)
self.link_slider = chrono.ChLinkLockPrismatic()
z2x = chrono.ChQuaternionD()
z2x.Q_from_AngAxis(-chrono.CH_C_PI / 2, chrono.ChVectorD(0, 1, 0))
self.link_slider.Initialize(
self.body_table, self.body_floor,
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0), z2x))
self.rev_pend_sys.Add(self.link_slider)
self.act_initpos = chrono.ChVectorD(0, 0, 0)
self.actuator = chrono.ChLinkMotorLinearForce()
self.actuator.Initialize(self.body_table, self.body_floor,
chrono.ChFrameD(self.act_initpos))
self.rev_pend_sys.Add(self.actuator)
self.rod_pin = chrono.ChMarker()
self.body_rod.AddMarker(self.rod_pin)
self.rod_pin.Impose_Abs_Coord(
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0)))
self.table_pin = chrono.ChMarker()
self.body_table.AddMarker(self.table_pin)
self.table_pin.Impose_Abs_Coord(
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0)))
self.pin_joint = chrono.ChLinkLockRevolute()
self.pin_joint.Initialize(self.rod_pin, self.table_pin)
self.rev_pend_sys.Add(self.pin_joint)
if self.render:
# ---------------------------------------------------------------------
#
# Create an Irrlicht application to visualize the system
#
# ==IMPORTANT!== Use this function for adding a ChIrrNodeAsset to all items
# in the system. These ChIrrNodeAsset assets are 'proxies' to the Irrlicht meshes.
# If you need a finer control on which item really needs a visualization proxy
# Irrlicht, just use application.AssetBind(myitem); on a per-item basis.
self.myapplication.AssetBindAll()
# ==IMPORTANT!== Use this function for 'converting' into Irrlicht meshes the assets
# that you added to the bodies into 3D shapes, they can be visualized by Irrlicht!
self.myapplication.AssetUpdateAll()
self.isdone = False
self.steps = 0
self.step(np.array([[0]]))
return self.get_ob()
def reset(self):
#print("reset")
self.isdone = False
self.rev_pend_sys.Clear()
# create it
self.body_rod = chrono.ChBody()
# set initial position
self.body_rod.SetPos(chrono.ChVectorD(0, self.size_rod_y / 2, 0))
# set mass properties
self.body_rod.SetMass(self.mass_rod)
self.body_rod.SetInertiaXX(
chrono.ChVectorD(self.inertia_rod_x, self.inertia_rod_y,
self.inertia_rod_x))
# set collision surface properties
self.body_rod.SetMaterialSurface(self.rod_material)
self.cyl_base1 = chrono.ChVectorD(0, -self.size_rod_y / 2, 0)
self.cyl_base2 = chrono.ChVectorD(0, self.size_rod_y / 2, 0)
self.body_rod_shape = chrono.ChCylinderShape()
self.body_rod_shape.GetCylinderGeometry().p1 = self.cyl_base1
self.body_rod_shape.GetCylinderGeometry().p2 = self.cyl_base2
self.body_rod_shape.GetCylinderGeometry().rad = self.radius_rod
self.body_rod.AddAsset(self.body_rod_shape)
self.rev_pend_sys.Add(self.body_rod)
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(chrono.ChVectorD(0, -5, 0))
self.body_floor.SetMaterialSurface(self.rod_material)
self.body_floor_shape = chrono.ChBoxShape()
self.body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(3, 1, 3)
self.body_floor.GetAssets().push_back(self.body_floor_shape)
self.body_floor_texture = chrono.ChTexture()
self.body_floor_texture.SetTextureFilename(chrono.GetChronoDataPath() +
'/concrete.jpg')
self.body_floor.GetAssets().push_back(self.body_floor_texture)
self.rev_pend_sys.Add(self.body_floor)
self.body_table = chrono.ChBody()
self.body_table.SetPos(chrono.ChVectorD(0, -self.size_table_y / 2, 0))
self.body_table.SetMaterialSurface(self.rod_material)
self.body_table.SetMass(0.1)
self.body_table_shape = chrono.ChBoxShape()
self.body_table_shape.GetBoxGeometry().Size = chrono.ChVectorD(
self.size_table_x / 2, self.size_table_y / 2,
self.size_table_z / 2)
self.body_table_shape.SetColor(chrono.ChColor(0.4, 0.4, 0.5))
self.body_table.GetAssets().push_back(self.body_table_shape)
self.body_table_texture = chrono.ChTexture()
self.body_table_texture.SetTextureFilename(chrono.GetChronoDataPath() +
'/concrete.jpg')
self.body_table.GetAssets().push_back(self.body_table_texture)
self.rev_pend_sys.Add(self.body_table)
self.link_slider = chrono.ChLinkLockPrismatic()
z2x = chrono.ChQuaternionD()
z2x.Q_from_AngAxis(-chrono.CH_C_PI / 2, chrono.ChVectorD(0, 1, 0))
self.link_slider.Initialize(
self.body_table, self.body_floor,
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0), z2x))
self.rev_pend_sys.Add(self.link_slider)
self.act_initpos = chrono.ChVectorD(0, 0, 0)
self.actuator = chrono.ChLinkMotorLinearForce()
self.actuator.Initialize(self.body_table, self.body_floor,
chrono.ChFrameD(self.act_initpos))
self.rev_pend_sys.Add(self.actuator)
self.rod_pin = chrono.ChMarker()
self.body_rod.AddMarker(self.rod_pin)
self.rod_pin.Impose_Abs_Coord(
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0)))
self.table_pin = chrono.ChMarker()
self.body_table.AddMarker(self.table_pin)
self.table_pin.Impose_Abs_Coord(
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0)))
self.pin_joint = chrono.ChLinkLockRevolute()
self.pin_joint.Initialize(self.rod_pin, self.table_pin)
self.rev_pend_sys.Add(self.pin_joint)
if self.render_setup:
self.myapplication.AssetBindAll()
self.myapplication.AssetUpdateAll()
self.isdone = False
self.steps = 0
self.step(np.array([[0]]))
return self.get_ob()
def reset(self):
self.isdone = False
self.robosystem.Clear()
#action = (np.random.rand(6,)-0.5)*2
#torques = np.multiply(action, self.maxT)
self.exported_items = chrono.ImportSolidWorksSystem(self.fpath)
self.csys = []
self.frames = []
self.revs = []
self.motors = []
self.limits = []
for con, coi in zip(self.con_link, self.coi_link):
indices = []
for i in range(len(self.exported_items)):
if con == self.exported_items[i].GetName(
) or coi == self.exported_items[i].GetName():
indices.append(i)
rev = self.exported_items[indices[0]]
af0 = rev.GetAssetsFrame()
# Revolute joints and ChLinkMotorRotation are z oriented, while parallel is x oriented.
# Event though this Frame won't be used anymore is good practice to create a copy before editing its value.
af = chrono.ChFrameD(af0)
af.SetRot(af0.GetRot() % chrono.Q_ROTATE_X_TO_Z)
self.frames.append(af)
for i in indices:
del self.exported_items[i]
# ADD IMPORTED ITEMS TO THE SYSTEM
for my_item in self.exported_items:
self.robosystem.Add(my_item)
"""
$$$$$$$$ FIND THE SW DEFINED CONSTRAINTS, GET THEIR MARKERS AND GET RID OF EM $$$$$$$$
"""
self.bodies = [
self.robosystem.SearchBody(name) for name in self.bodiesNames
]
self.hand = self.robosystem.SearchBody('Hand_base_and_p07-2')
self.base = self.robosystem.SearchBody('Racer3_p01-3')
self.biceps = self.robosystem.SearchBody('Racer3_p03-1')
self.forearm = self.robosystem.SearchBody('Racer3_p05-1')
self.finger1 = self.robosystem.SearchBody('HAND_e_finger-1')
self.finger2 = self.robosystem.SearchBody('HAND_e_finger-2')
for i in range(len(self.con_link)):
revolute = chrono.ChLinkLockRevolute()
cs = chrono.ChCoordsysD(self.frames[i].GetPos(),
self.frames[i].GetRot())
self.csys.append(cs)
revolute.Initialize(self.bodies[i], self.bodies[i + 1],
self.csys[i])
self.revs.append(revolute)
self.robosystem.Add(self.revs[i])
lim = self.revs[i].GetLimit_Rz()
self.limits.append(lim)
self.limits[i].SetActive(True)
self.limits[i].SetMin(self.minRot[i] * (math.pi / 180))
self.limits[i].SetMax(self.maxRot[i] * (math.pi / 180))
m = chrono.ChLinkMotorRotationTorque()
m.Initialize(self.bodies[i], self.bodies[i + 1], self.frames[i])
#self.robosystem.Add(m2)
#m2.SetTorqueFunction(chrono.ChFunction_Const(5))
self.motors.append(m)
#self.motors[i].SetTorqueFunction(chrono.ChFunction_Const(float(torques[i])))
self.robosystem.Add(self.motors[i])
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(chrono.ChVectorD(0, -1, 0))
# Floor Collision.
self.body_floor.GetCollisionModel().ClearModel()
self.body_floor.GetCollisionModel().AddBox(self.my_material, 5, 1, 5,
chrono.ChVectorD(0, 0, 0))
self.body_floor.GetCollisionModel().BuildModel()
self.body_floor.SetCollide(True)
# Visualization shape
body_floor_shape = chrono.ChBoxShape()
body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(5, 1, 5)
body_floor_shape.SetColor(chrono.ChColor(0.4, 0.4, 0.5))
self.body_floor.GetAssets().push_back(body_floor_shape)
body_floor_texture = chrono.ChTexture()
texpath = os.path.join(chrono.GetChronoDataPath(), 'concrete.jpg')
body_floor_texture.SetTextureFilename(texpath)
self.body_floor.GetAssets().push_back(body_floor_texture)
self.robosystem.Add(self.body_floor)
r = np.random.rand(2, ) - np.asarray([0.5, 0.5])
self.targ_init_pos = [
-0.52 + 2 * (r[0] * 0.05), 0.015, 2 * r[1] * 0.05
]
self.targ_box = chrono.ChBody()
# UNset to grasp
self.targ_box.SetBodyFixed(True)
self.targ_box.SetPos(
chrono.ChVectorD(self.targ_init_pos[0], self.targ_init_pos[1],
self.targ_init_pos[2]))
# Floor Collision.
self.targ_box.GetCollisionModel().ClearModel()
self.targ_box.GetCollisionModel().AddBox(self.my_material, 0.015,
0.015, 0.015,
chrono.ChVectorD(0, 0, 0))
self.targ_box.GetCollisionModel().BuildModel()
self.targ_box.SetCollide(True)
# Visualization shape
targ_box_shape = chrono.ChBoxShape()
targ_box_shape.GetBoxGeometry().Size = chrono.ChVectorD(
0.015, 0.015, 0.015)
col = chrono.ChColorAsset()
col.SetColor(chrono.ChColor(1.0, 0, 0))
self.targ_box.GetAssets().push_back(targ_box_shape)
self.targ_box.GetAssets().push_back(col)
self.robosystem.Add(self.targ_box)
self.numsteps = 0
if (self.render_setup):
self.myapplication.AssetBindAll()
self.myapplication.AssetUpdateAll()
return self.get_ob()
def reset(self):
#print("reset")
self.isdone = False
self.rev_pend_sys.Clear()
# create it
self.body_rod = chrono.ChBody()
# set initial position
self.body_rod.SetPos(chrono.ChVectorD(0, self.size_rod_y / 2, 0))
# set mass properties
self.body_rod.SetMass(self.mass_rod)
# una volta che le hao calcolate inserisci inerzie diverse
self.body_rod.SetInertiaXX(
chrono.ChVectorD(self.inertia_rod_x, self.inertia_rod_y,
self.inertia_rod_x))
# set collision surface properties
self.body_rod.SetMaterialSurface(self.rod_material)
# Visualization shape, for rendering animation
# vettori visual cilindro
self.cyl_base1 = chrono.ChVectorD(0, -self.size_rod_y / 2, 0)
self.cyl_base2 = chrono.ChVectorD(0, self.size_rod_y / 2, 0)
#body_rod_shape = chrono.ChCylinder(cyl_base1, cyl_base2, radius_rod)
self.body_rod_shape = chrono.ChCylinderShape()
self.body_rod_shape.GetCylinderGeometry().p1 = self.cyl_base1
self.body_rod_shape.GetCylinderGeometry().p2 = self.cyl_base2
self.body_rod_shape.GetCylinderGeometry().rad = self.radius_rod
#body_rod.GetAssets().push_back(body_rod_shape)
self.body_rod.AddAsset(self.body_rod_shape)
self.rev_pend_sys.Add(self.body_rod)
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(chrono.ChVectorD(0, -5, 0))
self.body_floor.SetMaterialSurface(self.rod_material)
# Visualization shape
if self.render:
self.body_floor_shape = chrono.ChBoxShape()
self.body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(
3, 1, 3)
self.body_floor.GetAssets().push_back(self.body_floor_shape)
self.body_floor_texture = chrono.ChTexture()
self.body_floor_texture.SetTextureFilename(
'../../../data/concrete.jpg')
self.body_floor.GetAssets().push_back(self.body_floor_texture)
self.rev_pend_sys.Add(self.body_floor)
self.body_table = chrono.ChBody()
self.body_table.SetPos(chrono.ChVectorD(0, -self.size_table_y / 2, 0))
self.body_table.SetMaterialSurface(self.rod_material)
# Visualization shape
if self.render:
self.body_table_shape = chrono.ChBoxShape()
self.body_table_shape.GetBoxGeometry().Size = chrono.ChVectorD(
self.size_table_x / 2, self.size_table_y / 2,
self.size_table_z / 2)
self.body_table_shape.SetColor(chrono.ChColor(0.4, 0.4, 0.5))
self.body_table.GetAssets().push_back(self.body_table_shape)
self.body_table_texture = chrono.ChTexture()
self.body_table_texture.SetTextureFilename(
'../../../data/concrete.jpg')
self.body_table.GetAssets().push_back(self.body_table_texture)
self.body_table.SetMass(0.1)
self.rev_pend_sys.Add(self.body_table)
# Create a constraint that blocks free 3 x y z translations and 3 rx ry rz rotations
# of the table respect to the floor, and impose that the relative imposed position
# depends on a specified motion law.
self.link_slider = chrono.ChLinkLockPrismatic()
z2x = chrono.ChQuaternionD()
z2x.Q_from_AngAxis(-chrono.CH_C_PI / 2, chrono.ChVectorD(0, 1, 0))
self.link_slider.Initialize(
self.body_table, self.body_floor,
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0), z2x))
self.rev_pend_sys.Add(self.link_slider)
self.link_slider.SetMotion_axis(chrono.ChVectorD(1, 0, 0))
#attuatore lineare
self.act_initpos = chrono.ChVectorD(0, 0, 0)
self.actuator = chrono.ChLinkMotorLinearForce()
self.actuator.Initialize(self.body_table, self.body_floor,
chrono.ChFrameD(self.act_initpos))
self.rev_pend_sys.Add(self.actuator)
# ..create the function for imposed y vertical motion, etc.
# tolta: solo traslazione asse z
#mfunY = chrono.ChFunction_Sine(0,1.5,0.001) # phase, frequency, amplitude
#link_slider.SetMotion_Y(mfunY)
# ..create the function for imposed z horizontal motion, etc.
#self.mfunX = chrono.ChFunction_Sine(0,1.5,0.4) # phase, frequency, amplitude
#self.link_slider.SetMotion_X(self.action)
# Note that you could use other types of ChFunction_ objects, or create
# your custom function by class inheritance (see demo_python.py), or also
# set a function for table rotation , etc.
# REVLOLUTE JOINT:
# create frames for the joint
self.rod_pin = chrono.ChMarker()
self.body_rod.AddMarker(self.rod_pin)
self.rod_pin.Impose_Abs_Coord(
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0)))
self.table_pin = chrono.ChMarker()
self.body_table.AddMarker(self.table_pin)
self.table_pin.Impose_Abs_Coord(
chrono.ChCoordsysD(chrono.ChVectorD(0, 0, 0)))
self.pin_joint = chrono.ChLinkLockRevolute()
self.pin_joint.Initialize(self.rod_pin, self.table_pin)
self.rev_pend_sys.Add(self.pin_joint)
if self.render:
# ---------------------------------------------------------------------
#
# Create an Irrlicht application to visualize the system
#
# ==IMPORTANT!== Use this function for adding a ChIrrNodeAsset to all items
# in the system. These ChIrrNodeAsset assets are 'proxies' to the Irrlicht meshes.
# If you need a finer control on which item really needs a visualization proxy
# Irrlicht, just use application.AssetBind(myitem); on a per-item basis.
self.myapplication.AssetBindAll()
# ==IMPORTANT!== Use this function for 'converting' into Irrlicht meshes the assets
# that you added to the bodies into 3D shapes, they can be visualized by Irrlicht!
self.myapplication.AssetUpdateAll()
# If you want to show shadows because you used "AddLightWithShadow()'
# you must remember this:
self.isdone = False
self.steps = 0
self.step(np.array([[0]]))
return self.get_ob()
def reset(self):
self.isdone = False
self.ant_sys.Clear()
self.body_abdomen = chrono.ChBody()
self.body_abdomen.SetPos(chrono.ChVectorD(0, self.abdomen_y0, 0))
self.body_abdomen.SetMass(self.abdomen_mass)
self.body_abdomen.SetInertiaXX(self.abdomen_inertia)
# set collision surface properties
self.body_abdomen.SetMaterialSurface(self.ant_material)
abdomen_ellipsoid = chrono.ChEllipsoid(
chrono.ChVectorD(0, 0, 0),
chrono.ChVectorD(self.abdomen_x, self.abdomen_y, self.abdomen_z))
self.abdomen_shape = chrono.ChEllipsoidShape(abdomen_ellipsoid)
self.body_abdomen.AddAsset(self.abdomen_shape)
self.body_abdomen.SetMaterialSurface(self.ant_material)
self.body_abdomen.SetCollide(True)
self.body_abdomen.GetCollisionModel().ClearModel()
self.body_abdomen.GetCollisionModel().AddEllipsoid(
self.abdomen_x, self.abdomen_y, self.abdomen_z,
chrono.ChVectorD(0, 0, 0))
self.body_abdomen.GetCollisionModel().BuildModel()
self.ant_sys.Add(self.body_abdomen)
tilt_factor = 1.1 # no tilt; higher number tilts body toward positive x
leg_ang = np.array([
tilt_factor * math.pi / 2, tilt_factor * math.pi / 2
]) #(1/4)*math.pi+(1/2)*math.pi*np.array([0,1])
Leg_quat = [chrono.ChQuaternionD() for i in range(len(leg_ang))]
self.leg_body = [chrono.ChBody() for i in range(len(leg_ang))]
self.leg_pos = [chrono.ChVectorD() for i in range(len(leg_ang))]
leg_cyl = chrono.ChCylinder(
-chrono.ChVectorD(self.leg_length / 2, 0, 0),
chrono.ChVectorD(self.leg_length / 2, 0, 0), self.leg_radius)
self.leg_shape = chrono.ChCylinderShape(leg_cyl)
ankle_cyl = chrono.ChCylinder(
-chrono.ChVectorD(self.ankle_length / 2, 0, 0),
chrono.ChVectorD(self.ankle_length / 2, 0, 0), self.ankle_radius)
self.ankle_shape = chrono.ChCylinderShape(ankle_cyl)
foot_sphere = chrono.ChSphere(
chrono.ChVectorD(self.ankle_length / 2, 0, 0), self.ankle_radius)
self.foot_shape = chrono.ChSphereShape(foot_sphere)
Leg_qa = [chrono.ChQuaternionD() for i in range(len(leg_ang))]
Leg_q = [chrono.ChQuaternionD() for i in range(len(leg_ang))]
z2x_leg = [chrono.ChQuaternionD() for i in range(len(leg_ang))]
Leg_rev_pos = []
Leg_chordsys = []
self.legjoint_frame = []
x_rel = []
z_rel = []
self.Leg_rev = [
chrono.ChLinkLockRevolute() for i in range(len(leg_ang))
]
self.leg_motor = [
chrono.ChLinkMotorRotationTorque() for i in range(len(leg_ang))
]
#ankle lists
anklejoint_chordsys = []
self.anklejoint_frame = []
self.ankleCOG_frame = []
q_ankle_zrot = [chrono.ChQuaternionD() for i in range(len(leg_ang))]
self.ankle_body = [chrono.ChBody() for i in range(len(leg_ang))]
self.Ankle_rev = [
chrono.ChLinkLockRevolute() for i in range(len(leg_ang))
]
self.ankle_motor = [
chrono.ChLinkMotorRotationTorque() for i in range(len(leg_ang))
]
for i in range(len(leg_ang)):
# Legs
Leg_quat[i].Q_from_AngAxis(-leg_ang[i], chrono.ChVectorD(0, 0, 1))
# postion of leg CM from abdomen
self.leg_pos[i] = chrono.ChVectorD(
(0.5 * self.leg_length * math.cos(leg_ang[i])),
(self.abdomen_y0 - self.leg_length / 2 * math.sin(leg_ang[i]) -
self.abdomen_y * math.cos(self.CMtohip_angle)),
(-1)**i * self.abdomen_z * math.sin(self.CMtohip_angle))
self.leg_body[i].SetPos(self.leg_pos[i])
self.leg_body[i].SetRot(Leg_quat[i])
self.leg_body[i].AddAsset(self.leg_shape)
self.leg_body[i].SetMass(self.leg_mass)
self.leg_body[i].SetInertiaXX(self.leg_inertia)
self.ant_sys.Add(self.leg_body[i])
x_rel.append(Leg_quat[i].Rotate(chrono.ChVectorD(1, 0, 0)))
z_rel.append(Leg_quat[i].Rotate(chrono.ChVectorD(0, 0, 1)))
Leg_qa[i].Q_from_AngAxis(-leg_ang[i], chrono.ChVectorD(0, 1, 0))
z2x_leg[i].Q_from_AngAxis(chrono.CH_C_PI / 2, x_rel[i])
Leg_q[i] = z2x_leg[i] * Leg_qa[i]
Leg_rev_pos.append(chrono.ChVectorD(0, self.abdomen_y0,
0)) # connection to abdomen
Leg_chordsys.append(chrono.ChCoordsysD(Leg_rev_pos[i], Leg_q[i]))
self.legjoint_frame.append(chrono.ChFrameD(Leg_chordsys[i]))
self.Leg_rev[i].Initialize(self.body_abdomen, self.leg_body[i],
Leg_chordsys[i])
self.ant_sys.Add(self.Leg_rev[i])
self.leg_motor[i].Initialize(self.body_abdomen, self.leg_body[i],
self.legjoint_frame[i])
self.ant_sys.Add(self.leg_motor[i])
# Ankles
q_ankle_zrot[i].Q_from_AngAxis(-self.ankle_angle, z_rel[i])
anklejoint_chordsys.append(
chrono.ChCoordsysD(
self.leg_body[i].GetPos() +
self.leg_body[i].GetRot().Rotate(
chrono.ChVectorD(self.leg_length / 2, 0, 0)),
q_ankle_zrot[i] * self.leg_body[i].GetRot()))
self.anklejoint_frame.append(
chrono.ChFrameD(anklejoint_chordsys[i]))
self.ankle_body[i].SetPos(
self.anklejoint_frame[i].GetPos() +
self.anklejoint_frame[i].GetRot().Rotate(
chrono.ChVectorD(self.ankle_length / 2, 0, 0)))
self.ankle_body[i].SetRot(self.anklejoint_frame[i].GetRot())
self.ankle_body[i].AddAsset(self.ankle_shape)
self.ankle_body[i].SetMass(self.ankle_mass)
self.ankle_body[i].SetInertiaXX(self.ankle_inertia)
self.ant_sys.Add(self.ankle_body[i])
self.Ankle_rev[i].Initialize(self.leg_body[i], self.ankle_body[i],
anklejoint_chordsys[i])
self.ant_sys.Add(self.Ankle_rev[i])
self.ankle_motor[i].Initialize(self.leg_body[i],
self.ankle_body[i],
self.anklejoint_frame[i])
self.ant_sys.Add(self.ankle_motor[i])
# Feet collisions
self.ankle_body[i].SetMaterialSurface(self.ant_material)
self.ankle_body[i].SetCollide(True)
self.ankle_body[i].GetCollisionModel().ClearModel()
self.ankle_body[i].GetCollisionModel().AddSphere(
self.ankle_radius, chrono.ChVectorD(self.ankle_length / 2, 0,
0))
self.ankle_body[i].GetCollisionModel().BuildModel()
self.ankle_body[i].AddAsset(self.ankle_shape)
self.ankle_body[i].AddAsset(self.foot_shape)
# Limits need to turn back to true
self.Leg_rev[i].GetLimit_Rz().SetActive(True)
self.Leg_rev[i].GetLimit_Rz().SetMin(-math.pi / 3)
self.Leg_rev[i].GetLimit_Rz().SetMax(math.pi / 3)
self.Ankle_rev[i].GetLimit_Rz().SetActive(True)
self.Ankle_rev[i].GetLimit_Rz().SetMin(-math.pi / 3)
self.Ankle_rev[i].GetLimit_Rz().SetMax(math.pi / 3)
# Create the room floor: a simple fixed rigid body with a collision shape
# and a visualization shape
self.body_floor = chrono.ChBody()
self.body_floor.SetBodyFixed(True)
self.body_floor.SetPos(
chrono.ChVectorD(
0, -self.abdomen_y0 -
self.abdomen_y * math.cos(self.CMtohip_angle) -
self.ankle_radius, 0))
self.body_floor.SetMaterialSurface(self.ant_material)
# Floor Collision.
self.body_floor.SetMaterialSurface(self.ant_material)
self.body_floor.GetCollisionModel().ClearModel()
self.body_floor.GetCollisionModel().AddBox(50, 1, 50,
chrono.ChVectorD(0, 0, 0))
self.body_floor.GetCollisionModel().BuildModel()
self.body_floor.SetCollide(True)
# Visualization shape
body_floor_shape = chrono.ChBoxShape()
body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(5, 1, 5)
body_floor_shape.SetColor(chrono.ChColor(0.4, 0.4, 0.5))
self.body_floor.GetAssets().push_back(body_floor_shape)
body_floor_texture = chrono.ChTexture()
body_floor_texture.SetTextureFilename('../data/grass.jpg')
self.body_floor.GetAssets().push_back(body_floor_texture)
self.ant_sys.Add(self.body_floor)
# this was commented out to not fix the segments
# this is helpful to check geometry of humanoid
#self.body_abdomen.SetBodyFixed(True)
#self.leg_body[0].SetBodyFixed(True)
#self.leg_body[1].SetBodyFixed(True)
#self.ankle_body[0].SetBodyFixed(True)
#self.ankle_body[1].SetBodyFixed(True)
if (self.animate):
self.myapplication.AssetBindAll()
self.myapplication.AssetUpdateAll()
self.numsteps = 0
self.step(np.zeros(4))
return self.get_ob()
body_floor = chrono.ChBody()
body_floor.SetBodyFixed(True)
body_floor.SetPos(chrono.ChVectorD(0, -1, 0 ))
body_floor.SetMaterialSurface(pebble_material)
# Collision shape (shared by all particle clones)
body_floor.GetCollisionModel().ClearModel()
body_floor.GetCollisionModel().AddBox(3, 1, 3) # hemi sizes
body_floor.GetCollisionModel().BuildModel()
body_floor.SetCollide(True)
# Visualization shape (shared by all particle clones)
body_floor_shape = chrono.ChBoxShape()
body_floor_shape.GetBoxGeometry().Size = chrono.ChVectorD(3, 1, 3)
body_floor.GetAssets().push_back(body_floor_shape)
body_floor_texture = chrono.ChTexture()
body_floor_texture.SetTextureFilename('concrete.jpeg')
body_floor.GetAssets().push_back(body_floor_texture)
my_system.Add(body_floor)
if True: # m_visualization == "irrlicht":
# ---------------------------------------------------------------------
#
# Create an Irrlicht application to visualize the system
#
myapplication = chronoirr.ChIrrApp(my_system, 'Test', chronoirr.dimension2du(1280,720))
print('Could not import ChronoIrrlicht')
# Chreate Chrono system
system = chrono.ChSystemNSC()
system.Set_G_acc(chrono.ChVectorD(0, -9.81, 0))
chrono.ChCollisionModel.SetDefaultSuggestedEnvelope(0.0025)
chrono.ChCollisionModel.SetDefaultSuggestedMargin(0.0025)
# Create ground body
ground_mat = chrono.ChMaterialSurfaceNSC()
ground = chrono.ChBodyEasyBox(20, 1, 20, 1000, True, True, ground_mat)
ground.SetPos(chrono.ChVectorD(0, -1, 0))
ground.SetBodyFixed(True)
system.Add(ground)
texture = chrono.ChTexture()
texture.SetTextureFilename(chrono.GetChronoDataFile("textures/concrete.jpg"))
ground.AddAsset(texture)
# Create Viper rover
rover = viper.ViperRover(system, chrono.ChVectorD(0, -0.2, 0),
chrono.Q_from_AngX(-chrono.CH_C_PI_2))
rover.Initialize()
# Create run-time visualization
application = chronoirr.ChIrrApp(system, "Viper rover - Rigid terrain",
chronoirr.dimension2du(1280, 720))
application.AddTypicalLogo(chrono.GetChronoDataPath() +
'logo_pychrono_alpha.png')
application.AddTypicalSky()
application.AddTypicalCamera(chronoirr.vector3df(0, 2, -2),
mfloor.SetBodyFixed(True)
my_system.Add(mfloor)
mfloor.GetCollisionModel().ClearModel()
mfloor.GetCollisionModel().AddTriangleMesh(mysurfmaterial, mmeshbox, False,
False, chrono.VNULL,
chrono.ChMatrix33D(1),
sphere_swept_thickness)
mfloor.GetCollisionModel().BuildModel()
mfloor.SetCollide(True)
masset_meshbox = chrono.ChTriangleMeshShape()
masset_meshbox.SetMesh(mmeshbox)
mfloor.AddAsset(masset_meshbox)
masset_texture = chrono.ChTexture()
masset_texture.SetTextureFilename(
chrono.GetChronoDataFile("textures/concrete.jpg"))
mfloor.AddAsset(masset_texture)
else:
# floor as a simple collision primitive:
mfloor = chrono.ChBodyEasyBox(2, 0.1, 2, 2700, True, True, mysurfmaterial)
mfloor.SetBodyFixed(True)
my_system.Add(mfloor)
masset_texture = chrono.ChTexture()
masset_texture.SetTextureFilename(
chrono.GetChronoDataFile("textures/concrete.jpg"))
mfloor.AddAsset(masset_texture)
