def __init__(self,
display,
resolution=settings.DISPSIZE,
data_file=settings.LOGFILENAME + ".edf",
fg_color=settings.FGC,
bg_color=settings.BGC,
eventdetection=settings.EVENTDETECTION,
saccade_velocity_threshold=35,
saccade_acceleration_threshold=9500,
blink_threshold=settings.BLINKTHRESH,
force_drift_correct=True,
pupil_size_mode=settings.EYELINKPUPILSIZEMODE,
**args):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# try to import copy docstring (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, libeyelink)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
global _eyelink
# Make sure that we have a valid data file. The local_data_file may
# contain a folder. The eyelink_data_file is only a basename, i.e.
# without folder. The eyelink_data_file must be at most eight characters
# and end with a `.edf` extension.
self.local_data_file = data_file
self.eyelink_data_file = os.path.basename(data_file)
stem, ext = os.path.splitext(self.eyelink_data_file)
if len(stem) > 8 or ext.lower() != '.edf':
raise Exception(
"The EyeLink cannot handle filenames longer than eight "
"characters (excluding '.edf' extension).")
# properties
self.display = display
self.fontsize = 18
self.scr = Screen(disptype=settings.DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=["escape", "q"], timeout=1)
self.resolution = resolution
self.recording = False
self.saccade_velocity_treshold = saccade_velocity_threshold
self.saccade_acceleration_treshold = saccade_acceleration_threshold
self.blink_threshold = blink_threshold
self.eye_used = None
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.pupil_size_mode = pupil_size_mode
self.prevsample = (-1, -1)
self.prevps = -1
# event detection properties
# degrees; maximal distance from fixation start (if gaze wanders beyond
# this, fixation has stopped)
self.fixtresh = 1.5
# milliseconds; amount of time gaze has to linger within self.fixtresh
# to be marked as a fixation
self.fixtimetresh = 100
# degrees per second; saccade velocity threshold
self.spdtresh = self.saccade_velocity_treshold
# degrees per second**2; saccade acceleration threshold
self.accthresh = self.saccade_acceleration_treshold
self.set_detection_type(eventdetection)
# weighted distance, used for determining whether a movement is due to
# measurement error (1 is ok, higher is more conservative and will
# result in only larger saccades to be detected)
self.weightdist = 10
# distance between participant and screen in cm
self.screendist = settings.SCREENDIST
# distance between participant and screen in cm
self.screensize = settings.SCREENSIZE
self.pixpercm = (self.resolution[0]/float(self.screensize[0]) + \
self.resolution[1]/float(self.screensize[1])) / 2.0
# only initialize eyelink once
if _eyelink == None:
try:
_eyelink = pylink.EyeLink()
except:
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to "
"connect to the tracker!")
# determine software version of tracker
self.tracker_software_ver = 0
self.eyelink_ver = pylink.getEYELINK().getTrackerVersion()
if self.eyelink_ver == 3:
tvstr = pylink.getEYELINK().getTrackerVersionString()
vindex = tvstr.find("EYELINK CL")
self.tracker_software_ver = int(float(tvstr[(vindex + \
len("EYELINK CL")):].strip()))
if self.eyelink_ver == 1:
self.eyelink_model = 'EyeLink I'
elif self.eyelink_ver == 2:
self.eyelink_model = 'EyeLink II'
elif self.eyelink_ver == 3:
self.eyelink_model = 'EyeLink 1000'
else:
self.eyelink_model = 'EyeLink (model unknown)'
# Open graphics
self.eyelink_graphics = EyelinkGraphics(self, _eyelink)
pylink.openGraphicsEx(self.eyelink_graphics)
# Optionally force drift correction. For some reason this must be done
# as (one of) the first things, otherwise a segmentation fault occurs.
if force_drift_correct:
try:
self.send_command('driftcorrect_cr_disable = OFF')
except:
print('Failed to force drift correction (EyeLink 1000 only)')
# Set pupil-size mode
if self.pupil_size_mode == 'area':
pylink.getEYELINK().setPupilSizeDiameter(False)
elif self.pupil_size_mode == 'diameter':
pylink.getEYELINK().setPupilSizeDiameter(True)
else:
raise Exception(
"pupil_size_mode should be 'area' or 'diameter', not %s" \
% self.pupil_size_mode)
pylink.getEYELINK().openDataFile(self.eyelink_data_file)
pylink.flushGetkeyQueue()
pylink.getEYELINK().setOfflineMode()
# notify eyelink of display resolution
self.send_command("screen_pixel_coords = 0 0 %d %d" % \
(self.resolution[0], self.resolution[1]))
# get some configuration stuff
if self.eyelink_ver >= 2:
self.send_command("select_parser_configuration 0")
if self.eyelink_ver == 2: # turn off scenelink camera stuff
self.send_command("scene_camera_gazemap = NO")
# set EDF file contents (this specifies which data is written to the EDF
# file)
self.send_command(
"file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,MESSAGE,BUTTON"
)
if self.tracker_software_ver >= 4:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS,HTARGET"
)
else:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS")
# set link data (this specifies which data is sent through the link and
# thus can be used in gaze contingent displays)
self.send_command(
"link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON")
if self.tracker_software_ver >= 4:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS,HTARGET"
)
else:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS")
# not quite sure what this means (according to Sebastiaan Mathot, it
# might be the button that is used to end drift correction?)
self.send_command("button_function 5 'accept_target_fixation'")
if not self.connected():
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to connect "
"to the eyetracker!")
def __init__(self,
display,
resolution=DISPSIZE,
data_file=LOGFILENAME + ".edf",
fg_color=FGC,
bg_color=BGC,
eventdetection=EVENTDETECTION,
saccade_velocity_threshold=35,
saccade_acceleration_threshold=9500,
force_drift_correct=True,
pupil_size_mode=EYELINKPUPILSIZEMODE,
**args):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# try to import copy docstring (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, libeyelink)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
global _eyelink
# Make sure that we have a valid data file. The local_data_file may
# contain a folder. The eyelink_data_file is only a basename, i.e.
# without folder. The eyelink_data_file must be at most eight characters
# and end with a `.edf` extension.
self.local_data_file = data_file
self.eyelink_data_file = os.path.basename(data_file)
stem, ext = os.path.splitext(self.eyelink_data_file)
if len(stem) > 8 or ext.lower() != '.edf':
raise Exception(
"The EyeLink cannot handle filenames longer than eight "
"characters (excluding '.edf' extension).")
# properties
self.display = display
self.fontsize = 18
self.scr = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=["escape", "q"], timeout=1)
self.resolution = resolution
self.recording = False
self.saccade_velocity_treshold = saccade_velocity_threshold
self.saccade_acceleration_treshold = saccade_acceleration_threshold
self.eye_used = None
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.pupil_size_mode = pupil_size_mode
self.prevsample = (-1, -1)
self.prevps = -1
# event detection properties
# degrees; maximal distance from fixation start (if gaze wanders beyond
# this, fixation has stopped)
self.fixtresh = 1.5
# milliseconds; amount of time gaze has to linger within self.fixtresh
# to be marked as a fixation
self.fixtimetresh = 100
# degrees per second; saccade velocity threshold
self.spdtresh = self.saccade_velocity_treshold
# degrees per second**2; saccade acceleration threshold
self.accthresh = self.saccade_acceleration_treshold
self.set_detection_type(eventdetection)
# weighted distance, used for determining whether a movement is due to
# measurement error (1 is ok, higher is more conservative and will
# result in only larger saccades to be detected)
self.weightdist = 10
# distance between participant and screen in cm
self.screendist = SCREENDIST
# distance between participant and screen in cm
self.screensize = SCREENSIZE
self.pixpercm = (self.resolution[0]/float(self.screensize[0]) + \
self.resolution[1]/float(self.screensize[1])) / 2.0
# only initialize eyelink once
if _eyelink == None:
try:
_eyelink = pylink.EyeLink()
except:
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to "
"connect to the tracker!")
# determine software version of tracker
self.tracker_software_ver = 0
self.eyelink_ver = pylink.getEYELINK().getTrackerVersion()
if self.eyelink_ver == 3:
tvstr = pylink.getEYELINK().getTrackerVersionString()
vindex = tvstr.find("EYELINK CL")
self.tracker_software_ver = int(float(tvstr[(vindex + \
len("EYELINK CL")):].strip()))
if self.eyelink_ver == 1:
self.eyelink_model = 'EyeLink I'
elif self.eyelink_ver == 2:
self.eyelink_model = 'EyeLink II'
elif self.eyelink_ver == 3:
self.eyelink_model = 'EyeLink 1000'
else:
self.eyelink_model = 'EyeLink (model unknown)'
# Open graphics
self.eyelink_graphics = EyelinkGraphics(self, _eyelink)
pylink.openGraphicsEx(self.eyelink_graphics)
# Optionally force drift correction. For some reason this must be done
# as (one of) the first things, otherwise a segmentation fault occurs.
if force_drift_correct:
self.send_command('driftcorrect_cr_disable = OFF')
# Set pupil-size mode
if self.pupil_size_mode == 'area':
pylink.getEYELINK().setPupilSizeDiameter(False)
elif self.pupil_size_mode == 'diameter':
pylink.getEYELINK().setPupilSizeDiameter(True)
else:
raise Exception(
"pupil_size_mode should be 'area' or 'diameter', not %s" \
% self.pupil_size_mode)
pylink.getEYELINK().openDataFile(self.eyelink_data_file)
pylink.flushGetkeyQueue()
pylink.getEYELINK().setOfflineMode()
# notify eyelink of display resolution
self.send_command("screen_pixel_coords = 0 0 %d %d" % \
(self.resolution[0], self.resolution[1]))
# get some configuration stuff
if self.eyelink_ver >= 2:
self.send_command("select_parser_configuration 0")
if self.eyelink_ver == 2: # turn off scenelink camera stuff
self.send_command("scene_camera_gazemap = NO")
# set EDF file contents (this specifies which data is written to the EDF
# file)
self.send_command(
"file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,MESSAGE,BUTTON"
)
if self.tracker_software_ver >= 4:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS,HTARGET"
)
else:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS")
# set link data (this specifies which data is sent through the link and
# thus can be used in gaze contingent displays)
self.send_command(
"link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON")
if self.tracker_software_ver >= 4:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS,HTARGET"
)
else:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS")
# not quite sure what this means (according to Sebastiaan Mathot, it
# might be the button that is used to end drift correction?)
self.send_command("button_function 5 'accept_target_fixation'")
if not self.connected():
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to connect "
"to the eyetracker!")
class libeyelink(BaseEyeTracker):
MAX_TRY = 100
def __init__(self,
display,
resolution=settings.DISPSIZE,
data_file=settings.LOGFILENAME + ".edf",
fg_color=settings.FGC,
bg_color=settings.BGC,
eventdetection=settings.EVENTDETECTION,
saccade_velocity_threshold=35,
saccade_acceleration_threshold=9500,
blink_threshold=settings.BLINKTHRESH,
force_drift_correct=True,
pupil_size_mode=settings.EYELINKPUPILSIZEMODE,
**args):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# try to import copy docstring (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, libeyelink)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
global _eyelink
# Make sure that we have a valid data file. The local_data_file may
# contain a folder. The eyelink_data_file is only a basename, i.e.
# without folder. The eyelink_data_file must be at most eight characters
# and end with a `.edf` extension.
self.local_data_file = data_file
self.eyelink_data_file = os.path.basename(data_file)
stem, ext = os.path.splitext(self.eyelink_data_file)
if len(stem) > 8 or ext.lower() != '.edf':
raise Exception(
"The EyeLink cannot handle filenames longer than eight "
"characters (excluding '.edf' extension).")
# properties
self.display = display
self.fontsize = 18
self.scr = Screen(disptype=settings.DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=["escape", "q"], timeout=1)
self.resolution = resolution
self.recording = False
self.saccade_velocity_treshold = saccade_velocity_threshold
self.saccade_acceleration_treshold = saccade_acceleration_threshold
self.blink_threshold = blink_threshold
self.eye_used = None
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.pupil_size_mode = pupil_size_mode
self.prevsample = (-1, -1)
self.prevps = -1
# event detection properties
# degrees; maximal distance from fixation start (if gaze wanders beyond
# this, fixation has stopped)
self.fixtresh = 1.5
# milliseconds; amount of time gaze has to linger within self.fixtresh
# to be marked as a fixation
self.fixtimetresh = 100
# degrees per second; saccade velocity threshold
self.spdtresh = self.saccade_velocity_treshold
# degrees per second**2; saccade acceleration threshold
self.accthresh = self.saccade_acceleration_treshold
self.set_detection_type(eventdetection)
# weighted distance, used for determining whether a movement is due to
# measurement error (1 is ok, higher is more conservative and will
# result in only larger saccades to be detected)
self.weightdist = 10
# distance between participant and screen in cm
self.screendist = settings.SCREENDIST
# distance between participant and screen in cm
self.screensize = settings.SCREENSIZE
self.pixpercm = (self.resolution[0]/float(self.screensize[0]) + \
self.resolution[1]/float(self.screensize[1])) / 2.0
# only initialize eyelink once
if _eyelink == None:
try:
_eyelink = pylink.EyeLink()
except:
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to "
"connect to the tracker!")
# determine software version of tracker
self.tracker_software_ver = 0
self.eyelink_ver = pylink.getEYELINK().getTrackerVersion()
if self.eyelink_ver == 3:
tvstr = pylink.getEYELINK().getTrackerVersionString()
vindex = tvstr.find("EYELINK CL")
self.tracker_software_ver = int(float(tvstr[(vindex + \
len("EYELINK CL")):].strip()))
if self.eyelink_ver == 1:
self.eyelink_model = 'EyeLink I'
elif self.eyelink_ver == 2:
self.eyelink_model = 'EyeLink II'
elif self.eyelink_ver == 3:
self.eyelink_model = 'EyeLink 1000'
else:
self.eyelink_model = 'EyeLink (model unknown)'
# Open graphics
self.eyelink_graphics = EyelinkGraphics(self, _eyelink)
pylink.openGraphicsEx(self.eyelink_graphics)
# Optionally force drift correction. For some reason this must be done
# as (one of) the first things, otherwise a segmentation fault occurs.
if force_drift_correct:
try:
self.send_command('driftcorrect_cr_disable = OFF')
except:
print('Failed to force drift correction (EyeLink 1000 only)')
# Set pupil-size mode
if self.pupil_size_mode == 'area':
pylink.getEYELINK().setPupilSizeDiameter(False)
elif self.pupil_size_mode == 'diameter':
pylink.getEYELINK().setPupilSizeDiameter(True)
else:
raise Exception(
"pupil_size_mode should be 'area' or 'diameter', not %s" \
% self.pupil_size_mode)
pylink.getEYELINK().openDataFile(self.eyelink_data_file)
pylink.flushGetkeyQueue()
pylink.getEYELINK().setOfflineMode()
# notify eyelink of display resolution
self.send_command("screen_pixel_coords = 0 0 %d %d" % \
(self.resolution[0], self.resolution[1]))
# get some configuration stuff
if self.eyelink_ver >= 2:
self.send_command("select_parser_configuration 0")
if self.eyelink_ver == 2: # turn off scenelink camera stuff
self.send_command("scene_camera_gazemap = NO")
# set EDF file contents (this specifies which data is written to the EDF
# file)
self.send_command(
"file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,MESSAGE,BUTTON"
)
if self.tracker_software_ver >= 4:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS,HTARGET"
)
else:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS")
# set link data (this specifies which data is sent through the link and
# thus can be used in gaze contingent displays)
self.send_command(
"link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON")
if self.tracker_software_ver >= 4:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS,HTARGET"
)
else:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS")
# not quite sure what this means (according to Sebastiaan Mathot, it
# might be the button that is used to end drift correction?)
self.send_command("button_function 5 'accept_target_fixation'")
if not self.connected():
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to connect "
"to the eyetracker!")
def send_command(self, cmd):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
pylink.getEYELINK().sendCommand(cmd)
def log(self, msg):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
pylink.getEYELINK().sendMessage(msg)
def status_msg(self, msg):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
print('status message: %s' % msg)
pylink.getEYELINK().sendCommand("record_status_message '%s'" % msg)
def connected(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
return pylink.getEYELINK().isConnected()
def calibrate(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
while True:
if self.recording:
raise Exception(
"Error in libeyelink.libeyelink.calibrate(): Trying to "
"calibrate after recording has started!")
# # # # #
# EyeLink calibration and validation
# attempt calibrate; confirm abort when esc pressed
while True:
self.eyelink_graphics.esc_pressed = False
pylink.getEYELINK().doTrackerSetup()
if not self.eyelink_graphics.esc_pressed:
break
self.confirm_abort_experiment()
# If we are using the built-in EyeLink event detection, we don't need
# the RMS calibration routine.
if self.eventdetection == 'native':
return
# # # # #
# RMS calibration
while True:
# present instructions
self.display.fill() # clear display
self.scr.draw_text(text= \
"Noise calibration: please look at the dot\n\n(press space to start)",
pos=(self.resolution[0]/2, int(self.resolution[1]*0.2)),
center=True, fontsize=self.fontsize)
self.scr.draw_fixation(fixtype='dot')
self.display.fill(self.scr)
self.display.show()
self.scr.clear() # clear screen again
# wait for spacepress
self.kb.get_key(keylist=['space'], timeout=None)
# start recording
self.log("PYGAZE RMS CALIBRATION START")
self.start_recording()
# show fixation
self.display.fill()
self.scr.draw_fixation(fixtype='dot')
self.display.fill(self.scr)
self.display.show()
self.scr.clear()
# wait for a bit, to allow participant to fixate
clock.pause(500)
# get samples
# samplelist, prefilled with 1 sample to prevent sl[-1] from producing
# an error; first sample will be ignored for RMS calculation
sl = [self.sample()]
t0 = clock.get_time() # starting time
while clock.get_time() - t0 < 1000:
s = self.sample() # sample
if s != sl[-1] and s != (-1, -1) and s != (0, 0):
sl.append(s)
# stop recording
self.log("PYGAZE RMS CALIBRATION END")
self.stop_recording()
# calculate RMS noise
Xvar = []
Yvar = []
for i in range(2, len(sl)):
Xvar.append((sl[i][0] - sl[i - 1][0])**2)
Yvar.append((sl[i][1] - sl[i - 1][1])**2)
if Xvar and Yvar: # check if properly recorded to avoid risk of division by zero error
XRMS = (sum(Xvar) / len(Xvar))**0.5
YRMS = (sum(Yvar) / len(Yvar))**0.5
self.pxdsttresh = (XRMS, YRMS)
# recalculate thresholds (degrees to pixels)
self.pxfixtresh = deg2pix(self.screendist, self.fixtresh,
self.pixpercm)
self.pxspdtresh = deg2pix(
self.screendist, self.spdtresh,
self.pixpercm) / 1000.0 # in pixels per millisecons
self.pxacctresh = deg2pix(
self.screendist, self.accthresh,
self.pixpercm) / 1000.0 # in pixels per millisecond**2
return
else: # if nothing recorded, display message saying so
self.display.fill()
self.scr.draw_text(text = \
"Noise calibration failed.\n\nPress r to retry,\nor press space to return to calibration screen.", \
pos=(self.resolution[0]/2, int(self.resolution[1]*0.2)), \
center=True, fontsize=self.fontsize)
self.display.fill(self.scr)
self.display.show()
self.scr.clear()
# wait for space or r press, if r restart noise calibration, if space return to calibration menu
keypressed = self.kb.get_key(keylist=['space', 'r'],
timeout=None)
if keypressed[0] == 'space':
break
def drift_correction(self, pos=None, fix_triggered=False):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if self.recording:
raise Exception(
"Error in libeyelink.libeyelink.drift_correction(): Trying to "
"perform drift correction after recording has started!")
if not self.connected():
raise Exception(
"Error in libeyelink.libeyelink.drift_correction(): The "
"eyelink is not connected!")
if pos == None:
pos = self.resolution[0] / 2, self.resolution[1] / 2
if fix_triggered:
return self.fix_triggered_drift_correction(pos)
return self.manual_drift_correction(pos)
def manual_drift_correction(self, pos):
"""
Performs a manual, i.e. spacebar-triggered drift correction.
Arguments:
pos -- The positionf or the drift-correction target.
Returns:
True if drift correction was successfull, False otherwise.
"""
self.draw_drift_correction_target(pos[0], pos[1])
self.eyelink_graphics.esc_pressed = False
try:
# The 0 parameters indicate that the display should not be cleared
# and we should not be allowed to fall back to the set-up screen.
error = pylink.getEYELINK().doDriftCorrect(pos[0], pos[1], 0, 0)
except:
error = -1
# A 0 exit code means successful drift correction
if error == 0:
return True
# If escape was pressed, we present the confirm abort screen
if self.eyelink_graphics.esc_pressed:
self.confirm_abort_experiment()
# If 'q' was pressed, we drop back to the calibration screen
else:
self.calibrate()
return False
def prepare_drift_correction(self, pos):
"""Puts the tracker in drift correction mode"""
# start collecting samples in drift correction mode
self.send_command("heuristic_filter = ON")
self.send_command("drift_correction_targets = %d %d" % pos)
self.send_command("start_drift_correction data = 0 0 1 0")
pylink.msecDelay(50)
# wait for a bit until samples start coming in (again, not sure if this
# is indeed what's going on)
if not pylink.getEYELINK().waitForBlockStart(100, 1, 0):
print(
"WARNING libeyelink.libeyelink.prepare_drift_correction(): "
"Failed to perform drift correction (waitForBlockStart error)")
def fix_triggered_drift_correction(self,
pos=None,
min_samples=30,
max_dev=60,
reset_threshold=10):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if self.recording:
raise Exception(
"Error in libeyelink.libeyelink.fix_triggered_drift_correction(): "
"Trying to perform drift correction after recording has started!"
)
self.recording = True
if pos == None:
pos = self.resolution[0] / 2, self.resolution[1] / 2
self.prepare_drift_correction(pos)
self.draw_drift_correction_target(pos[0], pos[1])
# loop until we have enough samples
lx = []
ly = []
while len(lx) < min_samples:
# Check whether the EyeLink is put into set-up mode on the EyeLink
# PC and, if so, jump to the calibration menu.
if pylink.getEYELINK().getCurrentMode() == pylink.IN_SETUP_MODE:
self.recording = False
self.calibrate()
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"'q' pressed")
return False
# pressing escape enters the calibration screen
resp = self.kb.get_key(keylist=["escape", "q"], timeout=1)[0]
if resp == 'escape':
self.recording = False
self.confirm_abort_experiment()
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"'escape' pressed")
return False
elif resp == 'q':
self.recording = False
self.calibrate()
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"'q' pressed")
return False
# collect a sample
x, y = self.sample()
if len(lx) == 0 or x != lx[-1] or y != ly[-1]:
# if present sample deviates too much from previous sample,
# start from scratch.
if len(lx) > 0 and (abs(x - lx[-1]) > reset_threshold or \
abs(y - ly[-1]) > reset_threshold):
lx = []
ly = []
# Collect a sample
else:
lx.append(x)
ly.append(y)
# If we have enough samples to perform a drift correction ...
if len(lx) == min_samples:
avg_x = sum(lx) / len(lx)
avg_y = sum(ly) / len(ly)
d = ((avg_x - pos[0])**2 + (avg_y - pos[1])**2)**0.5
# emulate spacebar press on succes
pylink.getEYELINK().sendKeybutton(32, 0, pylink.KB_PRESS)
# getCalibrationResult() returns 0 on success and an exception
# or a non-zero value otherwise
result = -1
try:
result = pylink.getEYELINK().getCalibrationResult()
except:
lx = []
ly = []
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"try again")
if result != 0:
try:
result = pylink.getEYELINK().getCalibrationResult()
except:
lx = []
ly = []
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"try again")
# apply drift correction
pylink.getEYELINK().applyDriftCorrect()
self.recording = False
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): success")
return True
def start_recording(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.recording = True
i = 0
while True:
# params: write samples, write event, send samples, send events
print(u'starting recording ...')
error = pylink.getEYELINK().startRecording(1, 1, 1, 1)
print(u'returned %s' % error)
if not error:
break
if i > self.MAX_TRY:
raise Exception(
"Error in libeyelink.libeyelink.start_recording(): Failed "
"to start recording!")
self.close()
clock.expend()
i += 1
print(
("WARNING libeyelink.libeyelink.start_recording(): Failed to "
"start recording (attempt %d of %d)") % (i, self.MAX_TRY))
pylink.msecDelay(100)
# don't know what this is
print(u'Start realtime mode ...')
pylink.msecDelay(100)
pylink.beginRealTimeMode(100)
# wait a bit until samples start coming in
print(u'Wait for block start ...')
pylink.msecDelay(100)
if not pylink.getEYELINK().waitForBlockStart(100, 1, 0):
raise Exception(
"Error in libeyelink.libeyelink.start_recording(): Failed to "
"start recording (waitForBlockStart error)!")
print(u'done ...')
def stop_recording(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
print(u'stopping recording ...')
self.recording = False
pylink.endRealTimeMode()
pylink.getEYELINK().setOfflineMode()
pylink.msecDelay(500)
print(u'done ...')
def close(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.eyelink_graphics.close()
if self.recording:
self.stop_recording()
# close data file and transfer it to the experimental PC
print("libeyelink.libeyelink.close(): Closing data file")
pylink.getEYELINK().closeDataFile()
pylink.msecDelay(500)
print("libeyelink.libeyelink.close(): Transferring %s to %s" \
% (self.eyelink_data_file, self.local_data_file))
# During data transfer, suppress output
_out = sys.stdout
with open(os.devnull, 'w') as fd:
sys.stdout = fd
pylink.getEYELINK().receiveDataFile(self.eyelink_data_file,
self.local_data_file)
sys.stdout = _out
pylink.msecDelay(500)
print("libeyelink.libeyelink.close(): Closing eyelink")
pylink.getEYELINK().close()
pylink.msecDelay(500)
def set_eye_used(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.eye_used = pylink.getEYELINK().eyeAvailable()
if self.eye_used == self.right_eye:
self.log_var("eye_used", "right")
elif self.eye_used == self.left_eye or self.eye_used == self.binocular:
self.log_var("eye_used", "left")
self.eye_used = self.left_eye
else:
print("WARNING libeyelink.libeyelink.set_eye_used(): Failed to "
"determine which eye is being recorded")
def pupil_size(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if not self.recording:
raise Exception(
"Error in libeyelink.libeyelink.pupil_size(): Recording was "
"not started before collecting eyelink data!")
if self.eye_used == None:
self.set_eye_used()
# get newest sample
s = pylink.getEYELINK().getNewestSample()
# check if sample is new
if s != None:
# right eye
if self.eye_used == self.right_eye and s.isRightSample():
ps = s.getRightEye().getPupilSize()
# left eye
elif self.eye_used == self.left_eye and s.isLeftSample():
ps = s.getLeftEye().getPupilSize()
# invalid
else:
ps = -1
# set new pupil size as previous pupil size
self.prevps = ps
# if no new sample is available, use old data
else:
ps = self.prevps
return ps
def sample(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if not self.recording:
raise Exception(
"Error in libeyelink.libeyelink.sample(): Recording was not "
"started before collecting eyelink data!")
if self.eye_used == None:
self.set_eye_used()
s = pylink.getEYELINK().getNewestSample()
if s != None:
if self.eye_used == self.right_eye and s.isRightSample():
gaze = s.getRightEye().getGaze()
elif self.eye_used == self.left_eye and s.isLeftSample():
gaze = s.getLeftEye().getGaze()
else:
gaze = (-1, -1)
self.prevsample = gaze[:]
else:
gaze = self.prevsample[:]
return gaze
def set_detection_type(self, eventdetection):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if eventdetection in ['pygaze', 'native']:
self.eventdetection = eventdetection
return (self.eventdetection, self.eventdetection, self.eventdetection)
def _get_eyelink_clock_async(self):
"""
Retrieve time differenece between tracker timestamps and
current clock time upheld in the pygaze environment.
Note that this is not guaranteed to be a static time difference, the
clocks might run at different speeds. Therefore you should consider
running this function every time you utilize on this time difference.
Returns:
The tracker time minus the clock time
"""
return pylink.getEYELINK().trackerTime() - clock.get_time()
def wait_for_event(self, event):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if not self.recording:
raise Exception(
"Error in libeyelink.libeyelink.wait_for_event(): Recording "
"was not started before collecting eyelink data!")
if self.eye_used == None:
self.set_eye_used()
if self.eventdetection == 'native':
# since the link buffer was not have been polled, old data has
# accumulated in the buffer -- so ignore events that are old:
t0 = clock.get_time() # time of call
while True:
d = pylink.getEYELINK().getNextData()
if d == event:
float_data = pylink.getEYELINK().getFloatData()
# corresponding clock_time
tc = float_data.getTime() - self._get_eyelink_clock_async()
if tc > t0:
return tc, float_data
if event == 5:
outcome = self.wait_for_saccade_start()
elif event == 6:
outcome = self.wait_for_saccade_end()
elif event == 7:
outcome = self.wait_for_fixation_start()
elif event == 8:
outcome = self.wait_for_fixation_end()
elif event == 3:
outcome = self.wait_for_blink_start()
elif event == 4:
outcome = self.wait_for_blink_end()
else:
raise Exception(
("Error in libeyelink.libeyelink.wait_for_event: eventcode %s "
"is not supported") % event)
return outcome
def wait_for_saccade_start(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.STARTSACC)
return t, d.getStartGaze()
# # # # #
# PyGaze method
else:
# get starting position (no blinks)
newpos = self.sample()
while not self.is_valid_sample(newpos):
newpos = self.sample()
# get starting time, position, intersampledistance, and velocity
t0 = clock.get_time()
prevpos = newpos[:]
s = 0
v0 = 0
# get samples
saccadic = False
while not saccadic:
# get new sample
newpos = self.sample()
t1 = clock.get_time()
if self.is_valid_sample(newpos) and newpos != prevpos:
# check if distance is larger than precision error
sx = newpos[0] - prevpos[0]
sy = newpos[1] - prevpos[1]
# weigthed distance: (sx/tx)**2 + (sy/ty)**2 > 1 means
# movement larger than RMS noise
if (sx/self.pxdsttresh[0])**2 + (sy/self.pxdsttresh[1])**2 \
> self.weightdist:
# calculate distance
# intersampledistance = speed in pixels/ms
s = ((sx)**2 + (sy)**2)**0.5
# calculate velocity
v1 = s / (t1 - t0)
# calculate acceleration
a = (v1 - v0) / (t1 - t0
) # acceleration in pixels/ms**2
# check if either velocity or acceleration are above
# threshold values
if v1 > self.pxspdtresh or a > self.pxacctresh:
saccadic = True
spos = prevpos[:]
stime = clock.get_time()
# update previous values
t0 = copy.copy(t1)
v0 = copy.copy(v1)
# udate previous sample
prevpos = newpos[:]
return stime, spos
def wait_for_saccade_end(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.ENDSACC)
return t, d.getStartGaze(), d.getEndGaze()
# # # # #
# PyGaze method
else:
# get starting position (no blinks)
t0, spos = self.wait_for_saccade_start()
# get valid sample
prevpos = self.sample()
while not self.is_valid_sample(prevpos):
prevpos = self.sample()
# get starting time, intersample distance, and velocity
t1 = clock.get_time()
# = intersample distance = speed in px/sample
s = ((prevpos[0] - spos[0])**2 + (prevpos[1] - spos[1])**2)**0.5
v0 = s / (t1 - t0)
# run until velocity and acceleration go below threshold
saccadic = True
while saccadic:
# get new sample
newpos = self.sample()
t1 = clock.get_time()
if self.is_valid_sample(newpos) and newpos != prevpos:
# calculate distance
# = speed in pixels/sample
s = ((newpos[0]-prevpos[0])**2 + \
(newpos[1]-prevpos[1])**2)**0.5
# calculate velocity
v1 = s / (t1 - t0)
# calculate acceleration
# acceleration in pixels/sample**2 (actually is
# v1-v0 / t1-t0; but t1-t0 = 1 sample)
a = (v1 - v0) / (t1 - t0)
# check if velocity and acceleration are below threshold
if v1 < self.pxspdtresh and (a > -1*self.pxacctresh and \
a < 0):
saccadic = False
epos = newpos[:]
etime = clock.get_time()
# update previous values
t0 = copy.copy(t1)
v0 = copy.copy(v1)
# udate previous sample
prevpos = newpos[:]
return etime, spos, epos
def wait_for_fixation_start(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.STARTFIX)
return t, d.getTime(), d.getStartGaze()
# # # # #
# PyGaze method
else:
# function assumes a 'fixation' has started when gaze position
# remains reasonably stable for self.fixtimetresh
# get starting position
spos = self.sample()
while not self.is_valid_sample(spos):
spos = self.sample()
# get starting time
t0 = clock.get_time()
# wait for reasonably stable position
moving = True
while moving:
# get new sample
npos = self.sample()
# check if sample is valid
if self.is_valid_sample(npos):
# check if new sample is too far from starting position
if (npos[0]-spos[0])**2 + (npos[1]-spos[1])**2 > \
self.pxfixtresh**2: # Pythagoras
# if not, reset starting position and time
spos = copy.copy(npos)
t0 = clock.get_time()
# if new sample is close to starting sample
else:
# get timestamp
t1 = clock.get_time()
# check if fixation time threshold has been surpassed
if t1 - t0 >= self.fixtimetresh:
# return time and starting position
return t1, spos
def wait_for_fixation_end(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.ENDFIX)
return t, d.getTime(), d.getStartGaze()
# # # # #
# PyGaze method
else:
# function assumes that a 'fixation' has ended when a deviation of
# more than fixtresh from the initial 'fixation' position has been
# detected
# get starting time and position
stime, spos = self.wait_for_fixation_start()
# loop until fixation has ended
while True:
# get new sample
npos = self.sample() # get newest sample
# check if sample is valid
if self.is_valid_sample(npos):
# check if sample deviates to much from starting position
if (npos[0]-spos[0])**2 + (npos[1]-spos[1])**2 > \
self.pxfixtresh**2: # Pythagoras
# break loop if deviation is too high
break
return clock.get_time(), spos
def wait_for_blink_start(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.STARTBLINK)
return t, d.getTime()
# # # # #
# PyGaze method
else:
blinking = False
# loop until there is a blink
while not blinking:
# get newest sample
gazepos = self.sample()
# check if it's a valid sample
if not self.is_valid_sample(gazepos):
# get timestamp for possible blink start
t0 = clock.get_time()
# loop until a blink is determined, or a valid sample occurs
while not self.is_valid_sample(self.sample()):
# check if time has surpassed 150 ms
if clock.get_time() - t0 >= self.blink_threshold:
# return timestamp of blink start
return t0
def wait_for_blink_end(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.ENDBLINK)
return t
# # # # #
# PyGaze method
else:
blinking = True
# loop while there is a blink
while blinking:
# get newest sample
gazepos = self.sample()
# check if it's valid
if self.is_valid_sample(gazepos):
# if it is a valid sample, blinking has stopped
blinking = False
# return timestamp of blink end
return clock.get_time()
def set_draw_calibration_target_func(self, func):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.eyelink_graphics.draw_cal_target = func
# ***
#
# Internal functions below
#
# ***
def is_valid_sample(self, gazepos):
"""
Checks if the sample provided is valid, based on EyeLink specific
criteria.
arguments
gazepos -- a (x,y) gaze position tuple, as returned by
self.sample()
returns
valid -- a Boolean: True on a valid sample, False on
an invalid sample
"""
# return False if a sample is invalid
if gazepos == (-1, -1):
return False
# in any other case, the sample is valid
return True
def confirm_abort_experiment(self):
"""
Asks for confirmation before aborting the experiment. Displays a
confirmation screen, collects the response, and acts accordingly.
Exceptions:
Raises a response_error upon confirmation.
Returns:
False if no confirmation was given.
"""
# Display the confirmation screen
scr = Screen(disptype=settings.DISPTYPE)
kb = Keyboard(timeout=5000)
yc = settings.DISPSIZE[1] / 2
xc = settings.DISPSIZE[0] / 2
ld = 40 # Line height
scr.draw_text(u'Really abort experiment?',
pos=(xc, yc - 3 * ld),
fontsize=self.fontsize)
scr.draw_text(u'Press \'Y\' to abort',
pos=(xc, yc - 0.5 * ld),
fontsize=self.fontsize)
scr.draw_text(u'Press any other key or wait 5s to go to setup',
pos=(xc, yc + 0.5 * ld),
fontsize=self.fontsize)
self.display.fill(scr)
self.display.show()
# process the response:
try:
key, time = kb.get_key()
except:
return False
# if confirmation, close experiment
if key == u'y':
raise Exception(u'The experiment was aborted')
self.eyelink_graphics.esc_pressed = False
return False
def draw_drift_correction_target(self, x, y):
"""
Draws the drift-correction target.
arguments
x -- The X coordinate
y -- The Y coordinate
"""
self.scr.clear()
self.scr.draw_fixation(fixtype='dot',
colour=settings.FGC,
pos=(x, y),
pw=0,
diameter=12)
self.display.fill(self.scr)
self.display.show()
class libeyelink(BaseEyeTracker):
MAX_TRY = 100
def __init__(self,
display,
resolution=DISPSIZE,
data_file=LOGFILENAME + ".edf",
fg_color=FGC,
bg_color=BGC,
eventdetection=EVENTDETECTION,
saccade_velocity_threshold=35,
saccade_acceleration_threshold=9500,
force_drift_correct=True,
pupil_size_mode=EYELINKPUPILSIZEMODE,
**args):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# try to import copy docstring (but ignore it if it fails, as we do
# not need it for actual functioning of the code)
try:
copy_docstr(BaseEyeTracker, libeyelink)
except:
# we're not even going to show a warning, since the copied
# docstring is useful for code editors; these load the docs
# in a non-verbose manner, so warning messages would be lost
pass
global _eyelink
# Make sure that we have a valid data file. The local_data_file may
# contain a folder. The eyelink_data_file is only a basename, i.e.
# without folder. The eyelink_data_file must be at most eight characters
# and end with a `.edf` extension.
self.local_data_file = data_file
self.eyelink_data_file = os.path.basename(data_file)
stem, ext = os.path.splitext(self.eyelink_data_file)
if len(stem) > 8 or ext.lower() != '.edf':
raise Exception(
"The EyeLink cannot handle filenames longer than eight "
"characters (excluding '.edf' extension).")
# properties
self.display = display
self.fontsize = 18
self.scr = Screen(disptype=DISPTYPE, mousevisible=False)
self.kb = Keyboard(keylist=["escape", "q"], timeout=1)
self.resolution = resolution
self.recording = False
self.saccade_velocity_treshold = saccade_velocity_threshold
self.saccade_acceleration_treshold = saccade_acceleration_threshold
self.eye_used = None
self.left_eye = 0
self.right_eye = 1
self.binocular = 2
self.pupil_size_mode = pupil_size_mode
self.prevsample = (-1, -1)
self.prevps = -1
# event detection properties
# degrees; maximal distance from fixation start (if gaze wanders beyond
# this, fixation has stopped)
self.fixtresh = 1.5
# milliseconds; amount of time gaze has to linger within self.fixtresh
# to be marked as a fixation
self.fixtimetresh = 100
# degrees per second; saccade velocity threshold
self.spdtresh = self.saccade_velocity_treshold
# degrees per second**2; saccade acceleration threshold
self.accthresh = self.saccade_acceleration_treshold
self.set_detection_type(eventdetection)
# weighted distance, used for determining whether a movement is due to
# measurement error (1 is ok, higher is more conservative and will
# result in only larger saccades to be detected)
self.weightdist = 10
# distance between participant and screen in cm
self.screendist = SCREENDIST
# distance between participant and screen in cm
self.screensize = SCREENSIZE
self.pixpercm = (self.resolution[0]/float(self.screensize[0]) + \
self.resolution[1]/float(self.screensize[1])) / 2.0
# only initialize eyelink once
if _eyelink == None:
try:
_eyelink = pylink.EyeLink()
except:
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to "
"connect to the tracker!")
# determine software version of tracker
self.tracker_software_ver = 0
self.eyelink_ver = pylink.getEYELINK().getTrackerVersion()
if self.eyelink_ver == 3:
tvstr = pylink.getEYELINK().getTrackerVersionString()
vindex = tvstr.find("EYELINK CL")
self.tracker_software_ver = int(float(tvstr[(vindex + \
len("EYELINK CL")):].strip()))
if self.eyelink_ver == 1:
self.eyelink_model = 'EyeLink I'
elif self.eyelink_ver == 2:
self.eyelink_model = 'EyeLink II'
elif self.eyelink_ver == 3:
self.eyelink_model = 'EyeLink 1000'
else:
self.eyelink_model = 'EyeLink (model unknown)'
# Open graphics
self.eyelink_graphics = EyelinkGraphics(self, _eyelink)
pylink.openGraphicsEx(self.eyelink_graphics)
# Optionally force drift correction. For some reason this must be done
# as (one of) the first things, otherwise a segmentation fault occurs.
if force_drift_correct:
self.send_command('driftcorrect_cr_disable = OFF')
# Set pupil-size mode
if self.pupil_size_mode == 'area':
pylink.getEYELINK().setPupilSizeDiameter(False)
elif self.pupil_size_mode == 'diameter':
pylink.getEYELINK().setPupilSizeDiameter(True)
else:
raise Exception(
"pupil_size_mode should be 'area' or 'diameter', not %s" \
% self.pupil_size_mode)
pylink.getEYELINK().openDataFile(self.eyelink_data_file)
pylink.flushGetkeyQueue()
pylink.getEYELINK().setOfflineMode()
# notify eyelink of display resolution
self.send_command("screen_pixel_coords = 0 0 %d %d" % \
(self.resolution[0], self.resolution[1]))
# get some configuration stuff
if self.eyelink_ver >= 2:
self.send_command("select_parser_configuration 0")
if self.eyelink_ver == 2: # turn off scenelink camera stuff
self.send_command("scene_camera_gazemap = NO")
# set EDF file contents (this specifies which data is written to the EDF
# file)
self.send_command(
"file_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,MESSAGE,BUTTON"
)
if self.tracker_software_ver >= 4:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS,HTARGET"
)
else:
self.send_command(
"file_sample_data = LEFT,RIGHT,GAZE,AREA,GAZERES,STATUS")
# set link data (this specifies which data is sent through the link and
# thus can be used in gaze contingent displays)
self.send_command(
"link_event_filter = LEFT,RIGHT,FIXATION,SACCADE,BLINK,BUTTON")
if self.tracker_software_ver >= 4:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS,HTARGET"
)
else:
self.send_command(
"link_sample_data = LEFT,RIGHT,GAZE,GAZERES,AREA,STATUS")
# not quite sure what this means (according to Sebastiaan Mathot, it
# might be the button that is used to end drift correction?)
self.send_command("button_function 5 'accept_target_fixation'")
if not self.connected():
raise Exception(
"Error in libeyelink.libeyelink.__init__(): Failed to connect "
"to the eyetracker!")
def send_command(self, cmd):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
pylink.getEYELINK().sendCommand(cmd)
def log(self, msg):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
pylink.getEYELINK().sendMessage(msg)
def log_var(self, var, val):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
pylink.getEYELINK().sendMessage("var %s %s" % (var, val))
def status_msg(self, msg):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
print('status message: %s' % msg)
pylink.getEYELINK().sendCommand("record_status_message '%s'" % msg)
def connected(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
return pylink.getEYELINK().isConnected()
def calibrate(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if self.recording:
raise Exception(
"Error in libeyelink.libeyelink.calibrate(): Trying to "
"calibrate after recording has started!")
# # # # #
# EyeLink calibration and validation
# attempt calibrate; confirm abort when esc pressed
while True:
self.eyelink_graphics.esc_pressed = False
pylink.getEYELINK().doTrackerSetup()
if not self.eyelink_graphics.esc_pressed:
break
self.confirm_abort_experiment()
# If we are using the built-in EyeLink event detection, we don't need
# the RMS calibration routine.
if self.eventdetection == 'native':
return
# # # # #
# RMS calibration
# present instructions
self.display.fill() # clear display
self.scr.draw_text(text= \
"Noise calibration: please look at the dot\n\n(press space to start)",
pos=(self.resolution[0]/2, int(self.resolution[1]*0.2)),
center=True, fontsize=self.fontsize)
self.scr.draw_fixation(fixtype='dot')
self.display.fill(self.scr)
self.display.show()
self.scr.clear() # clear screen again
# wait for spacepress
self.kb.get_key(keylist=['space'], timeout=None)
# start recording
self.log("PYGAZE RMS CALIBRATION START")
self.start_recording()
# show fixation
self.display.fill()
self.scr.draw_fixation(fixtype='dot')
self.display.fill(self.scr)
self.display.show()
self.scr.clear()
# wait for a bit, to allow participant to fixate
clock.pause(500)
# get samples
# samplelist, prefilled with 1 sample to prevent sl[-1] from producing
# an error; first sample will be ignored for RMS calculation
sl = [self.sample()]
t0 = clock.get_time() # starting time
while clock.get_time() - t0 < 1000:
s = self.sample() # sample
if s != sl[-1] and s != (-1, -1) and s != (0, 0):
sl.append(s)
# stop recording
self.log("PYGAZE RMS CALIBRATION END")
self.stop_recording()
# calculate RMS noise
Xvar = []
Yvar = []
for i in range(2, len(sl)):
Xvar.append((sl[i][0] - sl[i - 1][0])**2)
Yvar.append((sl[i][1] - sl[i - 1][1])**2)
XRMS = (sum(Xvar) / len(Xvar))**0.5
YRMS = (sum(Yvar) / len(Yvar))**0.5
self.pxdsttresh = (XRMS, YRMS)
# recalculate thresholds (degrees to pixels)
self.pxfixtresh = deg2pix(self.screendist, self.fixtresh,
self.pixpercm)
self.pxspdtresh = deg2pix(
self.screendist, self.spdtresh,
self.pixpercm) / 1000.0 # in pixels per millisecons
self.pxacctresh = deg2pix(
self.screendist, self.accthresh,
self.pixpercm) / 1000.0 # in pixels per millisecond**2
def drift_correction(self, pos=None, fix_triggered=False):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if self.recording:
raise Exception(
"Error in libeyelink.libeyelink.drift_correction(): Trying to "
"perform drift correction after recording has started!")
if not self.connected():
raise Exception(
"Error in libeyelink.libeyelink.drift_correction(): The "
"eyelink is not connected!")
if pos == None:
pos = self.resolution[0] / 2, self.resolution[1] / 2
if fix_triggered:
return self.fix_triggered_drift_correction(pos)
return self.manual_drift_correction(pos)
def manual_drift_correction(self, pos):
"""
Performs a manual, i.e. spacebar-triggered drift correction.
Arguments:
pos -- The positionf or the drift-correction target.
Returns:
True if drift correction was successfull, False otherwise.
"""
self.draw_drift_correction_target(pos[0], pos[1])
self.eyelink_graphics.esc_pressed = False
try:
# The 0 parameters indicate that the display should not be cleared
# and we should not be allowed to fall back to the set-up screen.
error = pylink.getEYELINK().doDriftCorrect(pos[0], pos[1], 0, 0)
except:
error = -1
# A 0 exit code means successful drift correction
if error == 0:
return True
# If escape was pressed, we present the confirm abort screen
if self.eyelink_graphics.esc_pressed:
self.confirm_abort_experiment()
# If 'q' was pressed, we drop back to the calibration screen
else:
self.calibrate()
return False
def prepare_drift_correction(self, pos):
"""Puts the tracker in drift correction mode"""
# start collecting samples in drift correction mode
self.send_command("heuristic_filter = ON")
self.send_command("drift_correction_targets = %d %d" % pos)
self.send_command("start_drift_correction data = 0 0 1 0")
pylink.msecDelay(50)
# wait for a bit until samples start coming in (again, not sure if this
# is indeed what's going on)
if not pylink.getEYELINK().waitForBlockStart(100, 1, 0):
print(
"WARNING libeyelink.libeyelink.prepare_drift_correction(): "
"Failed to perform drift correction (waitForBlockStart error)")
def fix_triggered_drift_correction(self,
pos=None,
min_samples=30,
max_dev=60,
reset_threshold=10):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if self.recording:
raise Exception(
"Error in libeyelink.libeyelink.fix_triggered_drift_correction(): "
"Trying to perform drift correction after recording has started!"
)
self.recording = True
if pos == None:
pos = self.resolution[0] / 2, self.resolution[1] / 2
self.prepare_drift_correction(pos)
self.draw_drift_correction_target(pos[0], pos[1])
# loop until we have enough samples
lx = []
ly = []
while len(lx) < min_samples:
# Check whether the EyeLink is put into set-up mode on the EyeLink
# PC and, if so, jump to the calibration menu.
if pylink.getEYELINK().getCurrentMode() == pylink.IN_SETUP_MODE:
self.recording = False
self.calibrate()
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"'q' pressed")
return False
# pressing escape enters the calibration screen
resp = self.kb.get_key(keylist=["escape", "q"], timeout=1)[0]
if resp == 'escape':
self.recording = False
self.confirm_abort_experiment()
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"'escape' pressed")
return False
elif resp == 'q':
self.recording = False
self.calibrate()
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"'q' pressed")
return False
# collect a sample
x, y = self.sample()
if len(lx) == 0 or x != lx[-1] or y != ly[-1]:
# if present sample deviates too much from previous sample,
# start from scratch.
if len(lx) > 0 and (abs(x - lx[-1]) > reset_threshold or \
abs(y - ly[-1]) > reset_threshold):
lx = []
ly = []
# Collect a sample
else:
lx.append(x)
ly.append(y)
# If we have enough samples to perform a drift correction ...
if len(lx) == min_samples:
avg_x = sum(lx) / len(lx)
avg_y = sum(ly) / len(ly)
d = ((avg_x - pos[0])**2 + (avg_y - pos[1])**2)**0.5
# emulate spacebar press on succes
pylink.getEYELINK().sendKeybutton(32, 0, pylink.KB_PRESS)
# getCalibrationResult() returns 0 on success and an exception
# or a non-zero value otherwise
result = -1
try:
result = pylink.getEYELINK().getCalibrationResult()
except:
lx = []
ly = []
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"try again")
if result != 0:
try:
result = pylink.getEYELINK().getCalibrationResult()
except:
lx = []
ly = []
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): "
"try again")
# apply drift correction
pylink.getEYELINK().applyDriftCorrect()
self.recording = False
print(
"libeyelink.libeyelink.fix_triggered_drift_correction(): success")
return True
def start_recording(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.recording = True
i = 0
while True:
# params: write samples, write event, send samples, send events
print(u'starting recording ...')
error = pylink.getEYELINK().startRecording(1, 1, 1, 1)
print(u'returned %s' % error)
if not error:
break
if i > self.MAX_TRY:
raise Exception(
"Error in libeyelink.libeyelink.start_recording(): Failed "
"to start recording!")
self.close()
clock.expend()
i += 1
print(
("WARNING libeyelink.libeyelink.start_recording(): Failed to "
"start recording (attempt %d of %d)") % (i, self.MAX_TRY))
pylink.msecDelay(100)
# don't know what this is
print(u'Start realtime mode ...')
pylink.msecDelay(100)
pylink.beginRealTimeMode(100)
# wait a bit until samples start coming in
print(u'Wait for block start ...')
pylink.msecDelay(100)
if not pylink.getEYELINK().waitForBlockStart(100, 1, 0):
raise Exception(
"Error in libeyelink.libeyelink.start_recording(): Failed to "
"start recording (waitForBlockStart error)!")
print(u'done ...')
def stop_recording(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
print(u'stopping recording ...')
self.recording = False
pylink.endRealTimeMode()
pylink.getEYELINK().setOfflineMode()
pylink.msecDelay(500)
print(u'done ...')
def close(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.eyelink_graphics.close()
if self.recording:
self.stop_recording()
# close data file and transfer it to the experimental PC
print("libeyelink.libeyelink.close(): Closing data file")
pylink.getEYELINK().closeDataFile()
pylink.msecDelay(500)
print("libeyelink.libeyelink.close(): Transferring %s to %s" \
% (self.eyelink_data_file, self.local_data_file))
pylink.getEYELINK().receiveDataFile(self.eyelink_data_file,
self.local_data_file)
pylink.msecDelay(500)
print("libeyelink.libeyelink.close(): Closing eyelink")
pylink.getEYELINK().close()
pylink.msecDelay(500)
def set_eye_used(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.eye_used = pylink.getEYELINK().eyeAvailable()
if self.eye_used == self.right_eye:
self.log_var("eye_used", "right")
elif self.eye_used == self.left_eye or self.eye_used == self.binocular:
self.log_var("eye_used", "left")
self.eye_used = self.left_eye
else:
print("WARNING libeyelink.libeyelink.set_eye_used(): Failed to "
"determine which eye is being recorded")
def pupil_size(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if not self.recording:
raise Exception(
"Error in libeyelink.libeyelink.pupil_size(): Recording was "
"not started before collecting eyelink data!")
if self.eye_used == None:
self.set_eye_used()
# get newest sample
s = pylink.getEYELINK().getNewestSample()
# check if sample is new
if s != None:
# right eye
if self.eye_used == self.right_eye and s.isRightSample():
ps = s.getRightEye().getPupilSize()
# left eye
elif self.eye_used == self.left_eye and s.isLeftSample():
ps = s.getLeftEye().getPupilSize()
# invalid
else:
ps = -1
# set new pupil size as previous pupil size
self.prevps = ps
# if no new sample is available, use old data
else:
ps = self.prevps
return ps
def sample(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if not self.recording:
raise Exception(
"Error in libeyelink.libeyelink.sample(): Recording was not "
"started before collecting eyelink data!")
if self.eye_used == None:
self.set_eye_used()
s = pylink.getEYELINK().getNewestSample()
if s != None:
if self.eye_used == self.right_eye and s.isRightSample():
gaze = s.getRightEye().getGaze()
elif self.eye_used == self.left_eye and s.isLeftSample():
gaze = s.getLeftEye().getGaze()
else:
gaze = (-1, -1)
self.prevsample = gaze[:]
else:
gaze = self.prevsample[:]
return gaze
def set_detection_type(self, eventdetection):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if eventdetection in ['pygaze', 'native']:
self.eventdetection = eventdetection
return (self.eventdetection, self.eventdetection, self.eventdetection)
def _get_eyelink_clock_async(self):
"""
Retrieve time differenece between tracker timestamps and
current clock time upheld in the pygaze environment.
Note that this is not guaranteed to be a static time difference, the
clocks might run at different speeds. Therefore you should consider
running this function every time you utilize on this time difference.
Returns:
The tracker time minus the clock time
"""
return pylink.getEYELINK().trackerTime() - clock.time()
def wait_for_event(self, event):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
if not self.recording:
raise Exception(
"Error in libeyelink.libeyelink.wait_for_event(): Recording "
"was not started before collecting eyelink data!")
if self.eye_used == None:
self.set_eye_used()
if self.eventdetection == 'native':
# since the link buffer was not have been polled, old data has
# accumulated in the buffer -- so ignore events that are old:
t0 = clock.time() # time of call
while True:
d = pylink.getEYELINK().getNextData()
if d == event:
float_data = pylink.getEYELINK().getFloatData()
# corresponding clock_time
tc = float_data.getTime() - self._get_eyelink_clock_async()
if tc > t0:
return tc, float_data
if event == 5:
outcome = self.wait_for_saccade_start()
elif event == 6:
outcome = self.wait_for_saccade_end()
elif event == 7:
outcome = self.wait_for_fixation_start()
elif event == 8:
outcome = self.wait_for_fixation_end()
elif event == 3:
outcome = self.wait_for_blink_start()
elif event == 4:
outcome = self.wait_for_blink_end()
else:
raise Exception(
("Error in libeyelink.libeyelink.wait_for_event: eventcode %s "
"is not supported") % event)
return outcome
def wait_for_saccade_start(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.STARTSACC)
return t, d.getStartGaze()
# # # # #
# PyGaze method
else:
# get starting position (no blinks)
newpos = self.sample()
while not self.is_valid_sample(newpos):
newpos = self.sample()
# get starting time, position, intersampledistance, and velocity
t0 = clock.get_time()
prevpos = newpos[:]
s = 0
v0 = 0
# get samples
saccadic = False
while not saccadic:
# get new sample
newpos = self.sample()
t1 = clock.get_time()
if self.is_valid_sample(newpos) and newpos != prevpos:
# check if distance is larger than precision error
sx = newpos[0] - prevpos[0]
sy = newpos[1] - prevpos[1]
# weigthed distance: (sx/tx)**2 + (sy/ty)**2 > 1 means
# movement larger than RMS noise
if (sx/self.pxdsttresh[0])**2 + (sy/self.pxdsttresh[1])**2 \
> self.weightdist:
# calculate distance
# intersampledistance = speed in pixels/ms
s = ((sx)**2 + (sy)**2)**0.5
# calculate velocity
v1 = s / (t1 - t0)
# calculate acceleration
a = (v1 - v0) / (t1 - t0
) # acceleration in pixels/ms**2
# check if either velocity or acceleration are above
# threshold values
if v1 > self.pxspdtresh or a > self.pxacctresh:
saccadic = True
spos = prevpos[:]
stime = clock.get_time()
# update previous values
t0 = copy.copy(t1)
v0 = copy.copy(v1)
# udate previous sample
prevpos = newpos[:]
return stime, spos
def wait_for_saccade_end(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.ENDSACC)
return t, d.getStartGaze(), d.getEndGaze()
# # # # #
# PyGaze method
else:
# get starting position (no blinks)
t0, spos = self.wait_for_saccade_start()
# get valid sample
prevpos = self.sample()
while not self.is_valid_sample(prevpos):
prevpos = self.sample()
# get starting time, intersample distance, and velocity
t1 = clock.get_time()
# = intersample distance = speed in px/sample
s = ((prevpos[0] - spos[0])**2 + (prevpos[1] - spos[1])**2)**0.5
v0 = s / (t1 - t0)
# run until velocity and acceleration go below threshold
saccadic = True
while saccadic:
# get new sample
newpos = self.sample()
t1 = clock.get_time()
if self.is_valid_sample(newpos) and newpos != prevpos:
# calculate distance
# = speed in pixels/sample
s = ((newpos[0]-prevpos[0])**2 + \
(newpos[1]-prevpos[1])**2)**0.5
# calculate velocity
v1 = s / (t1 - t0)
# calculate acceleration
# acceleration in pixels/sample**2 (actually is
# v1-v0 / t1-t0; but t1-t0 = 1 sample)
a = (v1 - v0) / (t1 - t0)
# check if velocity and acceleration are below threshold
if v1 < self.pxspdtresh and (a > -1*self.pxacctresh and \
a < 0):
saccadic = False
epos = newpos[:]
etime = clock.get_time()
# update previous values
t0 = copy.copy(t1)
v0 = copy.copy(v1)
# udate previous sample
prevpos = newpos[:]
return etime, spos, epos
def wait_for_fixation_start(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.STARTFIX)
return t, d.getTime(), d.getStartGaze()
# # # # #
# PyGaze method
else:
# function assumes a 'fixation' has started when gaze position
# remains reasonably stable for self.fixtimetresh
# get starting position
spos = self.sample()
while not self.is_valid_sample(spos):
spos = self.sample()
# get starting time
t0 = clock.get_time()
# wait for reasonably stable position
moving = True
while moving:
# get new sample
npos = self.sample()
# check if sample is valid
if self.is_valid_sample(npos):
# check if new sample is too far from starting position
if (npos[0]-spos[0])**2 + (npos[1]-spos[1])**2 > \
self.pxfixtresh**2: # Pythagoras
# if not, reset starting position and time
spos = copy.copy(npos)
t0 = clock.get_time()
# if new sample is close to starting sample
else:
# get timestamp
t1 = clock.get_time()
# check if fixation time threshold has been surpassed
if t1 - t0 >= self.fixtimetresh:
# return time and starting position
return t1, spos
def wait_for_fixation_end(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.ENDFIX)
return t, d.getTime(), d.getStartGaze()
# # # # #
# PyGaze method
else:
# function assumes that a 'fixation' has ended when a deviation of
# more than fixtresh from the initial 'fixation' position has been
# detected
# get starting time and position
stime, spos = self.wait_for_fixation_start()
# loop until fixation has ended
while True:
# get new sample
npos = self.sample() # get newest sample
# check if sample is valid
if self.is_valid_sample(npos):
# check if sample deviates to much from starting position
if (npos[0]-spos[0])**2 + (npos[1]-spos[1])**2 > \
self.pxfixtresh**2: # Pythagoras
# break loop if deviation is too high
break
return clock.get_time(), spos
def wait_for_blink_start(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.STARTBLINK)
return t, d.getTime()
# # # # #
# PyGaze method
else:
blinking = False
# loop until there is a blink
while not blinking:
# get newest sample
gazepos = self.sample()
# check if it's a valid sample
if not self.is_valid_sample(gazepos):
# get timestamp for possible blink start
t0 = clock.get_time()
# loop until a blink is determined, or a valid sample occurs
while not self.is_valid_sample(self.sample()):
# check if time has surpassed 150 ms
if clock.get_time() - t0 >= 150:
# return timestamp of blink start
return t0
def wait_for_blink_end(self):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
# # # # #
# EyeLink method
if self.eventdetection == 'native':
t, d = self.wait_for_event(pylink.ENDBLINK)
return t
# # # # #
# PyGaze method
else:
blinking = True
# loop while there is a blink
while blinking:
# get newest sample
gazepos = self.sample()
# check if it's valid
if self.is_valid_sample(gazepos):
# if it is a valid sample, blinking has stopped
blinking = False
# return timestamp of blink end
return clock.get_time()
def set_draw_calibration_target_func(self, func):
"""See pygaze._eyetracker.baseeyetracker.BaseEyeTracker"""
self.eyelink_graphics.draw_cal_target = func
# ***
#
# Internal functions below
#
# ***
def is_valid_sample(self, gazepos):
"""
Checks if the sample provided is valid, based on EyeLink specific
criteria.
arguments
gazepos -- a (x,y) gaze position tuple, as returned by
self.sample()
returns
valid -- a Boolean: True on a valid sample, False on
an invalid sample
"""
# return False if a sample is invalid
if gazepos == (-1, -1):
return False
# in any other case, the sample is valid
return True
def confirm_abort_experiment(self):
"""
Asks for confirmation before aborting the experiment. Displays a
confirmation screen, collects the response, and acts accordingly.
Exceptions:
Raises a response_error upon confirmation.
Returns:
False if no confirmation was given.
"""
# Display the confirmation screen
scr = Screen(disptype=DISPTYPE)
kb = Keyboard(timeout=5000)
yc = DISPSIZE[1] / 2
xc = DISPSIZE[0] / 2
ld = 40 # Line height
scr.draw_text(
u'Really abort experiment?',
pos=(xc, yc - 3 * ld),
fontsize=self.fontsize)
scr.draw_text(
u'Press \'Y\' to abort',
pos=(xc, yc - 0.5 * ld),
fontsize=self.fontsize)
scr.draw_text(
u'Press any other key or wait 5s to go to setup',
pos=(xc, yc + 0.5 * ld),
fontsize=self.fontsize)
self.display.fill(scr)
self.display.show()
# process the response:
try:
key, time = kb.get_key()
except:
return False
# if confirmation, close experiment
if key == u'y':
raise Exception(u'The experiment was aborted')
self.eyelink_graphics.esc_pressed = False
return False
def draw_drift_correction_target(self, x, y):
"""
Draws the drift-correction target.
arguments
x -- The X coordinate
y -- The Y coordinate
"""
self.scr.clear()
self.scr.draw_fixation(fixtype='dot', colour=FGC, pos=(x,y), pw=0, \
diameter=12)
self.display.fill(self.scr)
self.display.show()
