def test_min_spl1_should_allow_external_input_on_same_chip(self):
"""
Even when the rightmost neuron block / DNC merger is not reserved for external input, it
should be possible to place external input on the same chip.
"""
pynn.setup(marocco=self.marocco)
neuron_size = 4
self.marocco.neuron_placement.default_neuron_size(neuron_size)
self.marocco.merger_routing.strategy(
self.marocco.merger_routing.minimize_number_of_sending_repeaters)
# Do not reserve rightmost neuron block / DNC merger for external input.
self.marocco.neuron_placement.restrict_rightmost_neuron_blocks(False)
hicann = C.HICANNOnWafer(Enum(123))
pops = []
# All but the first neuron block are occupied.
for nb in range(1, C.NeuronBlockOnHICANN.end):
pop = pynn.Population(1, pynn.IF_cond_exp, {})
self.marocco.manual_placement.on_neuron_block(
pop, C.NeuronBlockOnWafer(C.NeuronBlockOnHICANN(nb), hicann))
pops.append(pop)
in_pop = pynn.Population(1, pynn.SpikeSourceArray, {})
self.marocco.manual_placement.on_hicann(in_pop, hicann)
pynn.run(0)
pynn.end()
results = self.load_results()
for pop in pops:
nrn = pop[0]
placement_item, = results.placement.find(nrn)
logical_neuron = placement_item.logical_neuron()
self.assertEqual(neuron_size, logical_neuron.size())
for denmem in logical_neuron:
self.assertEqual(hicann, denmem.toHICANNOnWafer())
address = placement_item.address()
# All used neuron blocks should be connected to a single DNC merger.
dnc = C.DNCMergerOnHICANN(3)
self.assertEqual(hicann, address.toHICANNOnWafer())
self.assertEqual(dnc, address.toDNCMergerOnHICANN())
self.assertEqual(C.DNCMergerOnWafer(dnc, hicann),
address.toDNCMergerOnWafer())
nrn = in_pop[0]
placement_item, = results.placement.find(nrn)
logical_neuron = placement_item.logical_neuron()
self.assertTrue(logical_neuron.is_external())
address = placement_item.address()
# External input must not be on DNC 3 merger, since all other
# mergers do not have direct access to a background generator.
dnc = C.DNCMergerOnHICANN(3)
self.assertEqual(hicann, address.toHICANNOnWafer())
self.assertNotEqual(dnc, address.toDNCMergerOnHICANN())
self.assertNotEqual(C.DNCMergerOnWafer(dnc, hicann),
address.toDNCMergerOnWafer())
def test_min_spl1_is_nongreedy_when_pops_are_placed_to_nbs(self, nbs):
"""
See above. Instead of a single population placed to the HICANN, populations are placed to
specific neuron blocks.
"""
pynn.setup(marocco=self.marocco)
neuron_size = 4
self.marocco.neuron_placement.default_neuron_size(neuron_size)
self.marocco.merger_routing.strategy(
self.marocco.merger_routing.minimize_number_of_sending_repeaters)
self.marocco.neuron_placement.restrict_rightmost_neuron_blocks(True)
hicann = C.HICANNOnWafer(Enum(123))
pops = []
for nb in nbs:
pop = pynn.Population(1, pynn.IF_cond_exp, {})
self.marocco.manual_placement.on_neuron_block(
pop, C.NeuronBlockOnWafer(C.NeuronBlockOnHICANN(nb), hicann))
pops.append(pop)
in_pop = pynn.Population(1, pynn.SpikeSourceArray, {})
self.marocco.manual_placement.on_hicann(in_pop, hicann)
pynn.run(0)
pynn.end()
results = self.load_results()
for pop in pops:
nrn = pop[0]
placement_item, = results.placement.find(nrn)
logical_neuron = placement_item.logical_neuron()
self.assertEqual(neuron_size, logical_neuron.size())
for denmem in logical_neuron:
self.assertEqual(hicann, denmem.toHICANNOnWafer())
address = placement_item.address()
# All used neuron blocks should still be connected to a single DNC merger.
dnc = C.DNCMergerOnHICANN(3)
self.assertEqual(hicann, address.toHICANNOnWafer())
self.assertEqual(dnc, address.toDNCMergerOnHICANN())
self.assertEqual(C.DNCMergerOnWafer(dnc, hicann),
address.toDNCMergerOnWafer())
nrn = in_pop[0]
placement_item, = results.placement.find(nrn)
logical_neuron = placement_item.logical_neuron()
self.assertTrue(logical_neuron.is_external())
address = placement_item.address()
# External input should be on the rightmost DNC merger since that is tried first.
dnc = C.DNCMergerOnHICANN(7)
self.assertEqual(hicann, address.toHICANNOnWafer())
self.assertEqual(dnc, address.toDNCMergerOnHICANN())
self.assertEqual(C.DNCMergerOnWafer(dnc, hicann),
address.toDNCMergerOnWafer())
def hicann_loopback(fpga, h, dnc):
"""
sets loopback on HICANN, such that channel 0->1, 2->3, etc.
"""
assert isinstance(h, Handle.HICANN)
# configure DNC mergers
mergers = HICANN.DNCMergerLine()
mer = HICANN.DNCMerger()
for j in range(8):
if (j % 2):
mer.config = HICANN.Merger.RIGHT_ONLY
else:
mer.config = HICANN.Merger.LEFT_ONLY
mer.slow = False
mer.loopback = not (j % 2) # 0->1, 2->3 etc...
mergers[Coordinate.DNCMergerOnHICANN(j)] = mer
HICANN.set_dnc_merger(h, mergers)
gbit = DNC.GbitReticle()
link = HICANN.GbitLink()
for i in range(8):
if (i % 2):
link.dirs[i] = HICANN.GbitLink.Direction.TO_DNC
else:
link.dirs[i] = HICANN.GbitLink.Direction.TO_HICANN
gbit[h.to_HICANNOnDNC()] = link
HICANN.set_gbit_link(h, link)
DNC.set_hicann_directions(fpga, dnc, gbit)
# make sure to switch off dnc loopback
DNC.set_loopback(fpga, dnc, DNC.Loopback())
def test_hw_merging_spl1_should_merge_some(self):
"""
some DNCs shall be merged, but not all, because of syndriver
requirements on each NB. 2 neurons will be placed (same HICANN).
A fully connected network is built.
This results in 8*2 = 16 synapses being routed to each neuron.
With neuron size 4 and chain length 3 -> 12 synapses can be realised
on each neuron. As a result at maximum 12 synapses shall be on the
same L1Route. The merger tries to merge them and will fail, then spit
it and merge 8 to each merger [3,5].
The result is a better L1 utilisation compared to one-to-one mapping,
2 instead of 8 routes, while staying within hardware constrains,
compared to merge all (16 synapses requiring 4 drivers, 1 driver will
be lost).
"""
pynn.setup(marocco=self.marocco)
neuron_size = 4
self.marocco.neuron_placement.default_neuron_size(neuron_size)
self.marocco.merger_routing.strategy(
self.marocco.merger_routing.minimize_as_possible)
# restrict to 3 driver, so that this test is hardware agnostic
self.marocco.synapse_routing.driver_chain_length(3)
hicann = C.HICANNOnWafer(Enum(123))
pops = []
# All but the first neuron block are occupied.
for nb in range(C.NeuronBlockOnHICANN.end):
pop = pynn.Population(2, pynn.IF_cond_exp, {})
self.marocco.manual_placement.on_neuron_block(
pop, C.NeuronBlockOnWafer(C.NeuronBlockOnHICANN(nb), hicann))
pops.append(pop)
for p in pops:
for other_p in pops:
pynn.Projection(p, other_p, pynn.AllToAllConnector(weights=1.))
pynn.run(0)
pynn.end()
merged_dncs = [3, 3, 3, 3, 5, 5, 5, 5]
results = self.load_results()
for pop in pops:
nrn = pop[0]
placement_item, = results.placement.find(nrn)
logical_neuron = placement_item.logical_neuron()
self.assertEqual(neuron_size, logical_neuron.size())
for denmem in logical_neuron:
self.assertEqual(hicann, denmem.toHICANNOnWafer())
address = placement_item.address()
# some DNCs shall be merged.
dnc = C.DNCMergerOnHICANN(merged_dncs[pop.euter_id()])
self.assertEqual(hicann, address.toHICANNOnWafer())
self.assertEqual(dnc, address.toDNCMergerOnHICANN())
self.assertEqual(C.DNCMergerOnWafer(dnc, hicann),
address.toDNCMergerOnWafer())
def test_FIFO_loopback(self):
loop = False
mergers = HICANN.DNCMergerLine()
mer = HICANN.DNCMerger()
for j in range(8):
if (j % 2): mer.config = HICANN.Merger.RIGHT_ONLY
else: mer.config = HICANN.Merger.LEFT_ONLY
mer.slow = False
mer.loopback = not (j % 2)
mergers[Coordinate.DNCMergerOnHICANN(j)] = mer
HICANN.set_dnc_merger(self.h, mergers)
gbit = DNC.GbitReticle()
link = HICANN.GbitLink()
for i in range(8):
if (i % 2): link.dirs[i] = HICANN.GbitLink.Direction.TO_DNC
else: link.dirs[i] = HICANN.GbitLink.Direction.TO_HICANN
gbit[self.h.to_HICANNOnDNC()] = link
HICANN.set_gbit_link(self.h, link)
DNC.set_hicann_directions(self.fpga, self.dnc, gbit)
sent_data = []
received_data = FPGA.PulseEventContainer()
sent_data.clear()
received_data.clear()
GbitLinkOnHICANN = Coordinate.GbitLinkOnHICANN
for i in range(500): #500 events, first spike getTime non-zero
sent_data.append(
FPGA.PulseEvent(
self.h.to_DNCOnFPGA(), #DNC-number (1 for vertical setup)
self.h.to_HICANNOnDNC(), #HICANN number 0
GbitLinkOnHICANN(0), #channel number 0
HICANN.L1Address(0), #neuron number 0
500 * i + 500)) #every 500 cycles
#send and receive events
received_data = FPGA.send_and_receive(
self.fpga, self.dnc, FPGA.PulseEventContainer(sent_data), loop,
100000) #0,1 seconds
for i in range(8):
link.dirs[i] = HICANN.GbitLink.Direction.OFF
for i in range(8):
gbit[Coordinate.HICANNOnDNC(Enum(i))] = link
HICANN.set_gbit_link(self.h, link)
DNC.set_hicann_directions(self.fpga, self.dnc, gbit)
HICANN.flush(self.h) #flush to hardware
print(len(sent_data), " packets sent, ", received_data.size(),
" received")
self.assertEqual(len(sent_data), received_data.size())
def L1TransmissionTest(self, block):
#period between events used in testing below
period = 150
#set PLL frequency
#HICANN.set_PLL_frequency(self.h, 100)
#configure DNC mergers
mergers = HICANN.DNCMergerLine()
for i in range(8):
mer = Coordinate.DNCMergerOnHICANN(i)
mergers[mer].config = HICANN.Merger.RIGHT_ONLY
mergers[mer].slow = True
mergers[mer].loopback = False
HICANN.set_dnc_merger(self.h, mergers)
#configure merger tree, phase
tree = HICANN.MergerTree() #default settings are OK
phase = HICANN.phase_t(0)
HICANN.set_merger_tree(self.h, tree)
HICANN.set_phase(self.h, phase)
#configure background generator
bgarray = HICANN.BackgroundGeneratorArray()
for i in range(8):
bgarray[i].enable(True)
bgarray[i].random(False)
bgarray[i].seed(200)
bgarray[i].period(period)
bgarray[i].address(HICANN.L1Address(0))
HICANN.set_background_generator(self.h, bgarray)
#configure sending repeaters
rep = Coordinate.RepeaterBlockOnHICANN(Coordinate.X(0),
Coordinate.Y(1))
HICANN.set_repeater_block(self.h, rep, HICANN.RepeaterBlock())
sr = HICANN.HorizontalRepeater()
sr.setOutput(Coordinate.right)
for i in range(8):
HICANN.set_repeater(self.h,
Coordinate.HLineOnHICANN(6 + 8 * i).repeater(),
sr)
#configure crossbars and synapse switches
cb = HICANN.Crossbar()
ss = HICANN.SynapseSwitch()
row_cfg = HICANN.CrossbarRow()
syn_row_cfg = HICANN.SynapseSwitchRow()
for i in range(8):
if block.x().value() == 0 and block.y().value() == 2:
cb.set(Coordinate.VLineOnHICANN(28 - 4 * i),
Coordinate.HLineOnHICANN(6 + 8 * i), True)
row_cfg = cb.get_row(Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.left)
HICANN.set_crossbar_switch_row(
self.h, Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.left, row_cfg)
elif block.x().value() == 1 and block.y().value() == 2:
cb.set(Coordinate.VLineOnHICANN(227 + 4 * i),
Coordinate.HLineOnHICANN(6 + 8 * i), True)
row_cfg = cb.get_row(Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.right)
HICANN.set_crossbar_switch_row(
self.h, Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.right, row_cfg)
elif block.x().value() == 0 and block.y().value() == 0:
addr = Coordinate.SynapseSwitchRowOnHICANN(
Coordinate.Y(15 - 2 * i), Coordinate.left)
cb.set(Coordinate.VLineOnHICANN(28 - 4 * i),
Coordinate.HLineOnHICANN(6 + 8 * i), True)
ss.set(Coordinate.VLineOnHICANN(28 - 4 * i), addr.line(),
True) #connecting two parallel vertical lanes
ss.set(Coordinate.VLineOnHICANN(29 - 4 * i), addr.line(), True)
row_cfg = cb.get_row(Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.left)
HICANN.set_crossbar_switch_row(
self.h, Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.left, row_cfg)
syn_row_cfg = ss.get_row(addr)
HICANN.set_syndriver_switch_row(self.h, addr, syn_row_cfg)
elif block.x().value() == 1 and block.y().value() == 0:
addr = Coordinate.SynapseSwitchRowOnHICANN(
Coordinate.Y(15 - 2 * i), Coordinate.right)
cb.set(Coordinate.VLineOnHICANN(227 + 4 * i),
Coordinate.HLineOnHICANN(6 + 8 * i), True)
ss.set(Coordinate.VLineOnHICANN(227 + 4 * i), addr.line(),
True) #connecting two parallel vertical lanes
ss.set(Coordinate.VLineOnHICANN(226 + 4 * i), addr.line(),
True)
row_cfg = cb.get_row(Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.right)
HICANN.set_crossbar_switch_row(
self.h, Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.right, row_cfg)
syn_row_cfg = ss.get_row(addr)
HICANN.set_syndriver_switch_row(self.h, addr, syn_row_cfg)
elif block.x().value() == 1 and block.y().value() == 1:
cb.set(Coordinate.VLineOnHICANN(28 - 4 * i),
Coordinate.HLineOnHICANN(6 + 8 * i), True)
cb.set(Coordinate.VLineOnHICANN(28 - 4 * i),
Coordinate.HLineOnHICANN(7 + 8 * i), True)
row_cfg = cb.get_row(Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.left)
HICANN.set_crossbar_switch_row(
self.h, Coordinate.HLineOnHICANN(6 + 8 * i),
Coordinate.left, row_cfg)
row_cfg = cb.get_row(Coordinate.HLineOnHICANN(7 + 8 * i),
Coordinate.left)
HICANN.set_crossbar_switch_row(
self.h, Coordinate.HLineOnHICANN(7 + 8 * i),
Coordinate.left, row_cfg)
#readout-routine
vr = HICANN.VerticalRepeater()
rb = HICANN.RepeaterBlock()
startrep = 0 #starting readout-repeater
registertype = HICANN.RepeaterBlock.EVEN #which readout-circuit is responsible
dir = Coordinate.top #transmit-direction
if block.x().value() == 0 and block.y().value() == 2:
startrep = 0
registertype = HICANN.RepeaterBlock.EVEN
dir = Coordinate.bottom
elif block.x().value() == 1 and block.y().value() == 2:
startrep = 227
registertype = HICANN.RepeaterBlock.EVEN
dir = Coordinate.bottom
elif block.x().value() == 0 and block.y().value() == 0:
startrep = 1
registertype = HICANN.RepeaterBlock.ODD
dir = Coordinate.top
elif block.x().value() == 1 and block.y().value() == 0:
startrep = 226
registertype = HICANN.RepeaterBlock.ODD
dir = Coordinate.top
success_counter = 0
# unfortunately center right readout routine is too different...
if not (block.x().value() == 1 and block.y().value() == 1):
for i in range(startrep, startrep + 32, 4):
#configure receiving repeater
vr.setInput(dir)
HICANN.set_repeater(self.h,
Coordinate.VLineOnHICANN(i).repeater(), vr)
HICANN.flush(self.h)
t.sleep(0.0005) #time for the dll to lock
#configure receiving repeater block
rb.start_tdi[registertype] = False #reset the full flag
HICANN.set_repeater_block(self.h, block, rb)
rb.start_tdi[
registertype] = True #start recording received data
HICANN.set_repeater_block(self.h, block, rb)
HICANN.flush(self.h)
t.sleep(0.001) #recording lasts for ca. 4 us - 1 ms
rb = HICANN.get_repeater_block(self.h, block)
test = rb.tdi_data[registertype]
for x in range(
2
): #see how many events come with correct delay (+/- 2)
if ((abs(abs(test[x + 1].time - test[x].time) - period)) <
3):
success_counter += 1
#~ print "From repeater " + str(i) + " received: "
#~ if rb.full_flag[registertype]:
#~ print "Full flag is set"
#~ else:
#~ print "Full flag is NOT set"
#~ print "Neuron number " + str(test[0].address) + " at time " + str(test[0].time)
#~ print "Neuron number " + str(test[1].address) + " at time " + str(test[1].time)
#~ print "Neuron number " + str(test[2].address) + " at time " + str(test[2].time) + "\n"
rb.start_tdi[
registertype] = False #reset the full flag TWO (!) times
HICANN.set_repeater_block(self.h, block, rb)
HICANN.set_repeater_block(self.h, block, rb)
#set repeater mode to IDLE to prevent conflicts
vr.setIdle()
HICANN.set_repeater(self.h,
Coordinate.VLineOnHICANN(i).repeater(), vr)
else:
hr = HICANN.HorizontalRepeater()
for i in range(7, 64, 8):
#configure receiving repeater
hr.setInput(Coordinate.right)
HICANN.set_repeater(self.h,
Coordinate.HLineOnHICANN(i).repeater(), hr)
HICANN.flush(self.h)
t.sleep(0.0005) #time for the dll to lock
#configure receiving repeater block
rb.start_tdi[
HICANN.RepeaterBlock.EVEN] = False #reset the full flag
HICANN.set_repeater_block(self.h, block, rb)
rb.start_tdi[HICANN.RepeaterBlock.
EVEN] = True #start recording received data
HICANN.set_repeater_block(self.h, block, rb)
HICANN.flush(self.h)
t.sleep(0.0001) #recording lasts for ca. 4 us - 1 ms
rb = HICANN.get_repeater_block(self.h, block)
test = rb.tdi_data[HICANN.RepeaterBlock.EVEN]
#~ print "From repeater " + str(i) + " received: "
#~ if rb.full_flag[registertype]:
#~ print "Full flag is set"
#~ else:
#~ print "Full flag is NOT set"
#~ print "Neuron number " + str(test[0].address) + " at time " + str(test[0].time)
#~ print "Neuron number " + str(test[1].address) + " at time " + str(test[1].time)
#~ print "Neuron number " + str(test[2].address) + " at time " + str(test[2].time) + "\n"
for x in range(
2): #see how many events come with correct delay
if ((abs(abs(test[x + 1].time - test[x].time) - period)) <
3):
success_counter += 1
rb.start_tdi[HICANN.RepeaterBlock.
EVEN] = False #reset the full flag TWO (!) times
HICANN.set_repeater_block(self.h, block, rb)
HICANN.set_repeater_block(self.h, block, rb)
#set repeater mode to IDLE to prevent conflicts
hr.setIdle()
HICANN.set_repeater(self.h,
Coordinate.HLineOnHICANN(i).repeater(), hr)
HICANN.flush(self.h)
return success_counter
def test_FPGABEGTest(self):
#configure DNC mergers
mergers = HICANN.DNCMergerLine()
for i in range(8):
j = Coordinate.DNCMergerOnHICANN(i)
if (i % 2): mergers[j].config = HICANN.Merger.RIGHT_ONLY
else: mergers[j].config = HICANN.Merger.LEFT_ONLY
mergers[j].slow = False
mergers[j].loopback = not (i % 2)
HICANN.set_dnc_merger(self.h, mergers)
#configure DNC<->HICANN links
gbit = DNC.GbitReticle()
link = HICANN.GbitLink()
for i in range(8):
if (i % 2): link.dirs[i] = HICANN.GbitLink.Direction.TO_DNC
else: link.dirs[i] = HICANN.GbitLink.Direction.TO_HICANN
gbit[self.h.to_HICANNOnDNC()] = link
HICANN.set_gbit_link(self.h, link)
DNC.set_hicann_directions(self.fpga, self.dnc, gbit)
#configure FPGA Background Generator
bg = FPGA.BackgroundGenerator()
bg.enable = True
bg.poisson = False
bg.seed = 12345 #cannot be zero
bg.rate = 300 #in DNC-clock cycles
bg.first_address = 2
bg.last_address = 3 #last address is greater or equal than first
bg.hicann_number = self.h.coordinate().onDNC()
bg.channels[0] = True #set active channels
bg.channels[2] = True
bg.channels[4] = True
bg.channels[6] = True
FPGA.set_fpga_background_generator(self.fpga, self.dnc, bg)
HICANN.flush(self.h)
#generate data container and receive data
data = FPGA.PulseEventContainer()
data.clear()
data = FPGA.receive(self.fpga, self.dnc, 50000) #0,05 seconds
print(str(data.size()) + " packets received")
self.assertNotEqual(0, data.size())
number_count = 0
channel_count = 0
numbers = []
channels = []
for i in range(data.size()):
numbers.append(int(data[i].getNeuronAddress()))
channels.append(data[i].getChannel().value())
for j in range(64):
if (numbers.count(j)): number_count += 1
for k in range(8):
if (channels.count(k)): channel_count += 1
#check if number of different neuron numbers matches
self.assertEqual(bg.last_address - bg.first_address + 1, number_count)
#check if number of used channels matches
self.assertEqual(bg.channels.count(), channel_count)
#turn the BEG off
bg.enable = False
FPGA.set_fpga_background_generator(self.fpga, self.dnc, bg)
#turn off the links to prevent packet collision
for hicann in Coordinate.iter_all(Coordinate.HICANNOnDNC):
link.dirs[hicann.toEnum().value()] = HICANN.GbitLink.Direction.OFF
gbit[hicann] = link
HICANN.set_gbit_link(self.h, link)
DNC.set_hicann_directions(self.fpga, self.dnc, gbit)
HICANN.flush(self.h)
def test_NeuronCurrentStimHWTest(self):
fgc = HICANN.FGControl()
fg_config = HICANN.FGConfig()
for block in [Enum(0), Enum(1)]:
block = Coordinate.FGBlockOnHICANN(block)
HICANN.set_fg_config(self.h, block, fg_config)
HICANN.set_fg_values(self.h, block, fgc.getBlock(block))
# 2nd: configure the neuron
nrn = HICANN.Neuron()
#HICANN.Neuron other_nrn = HICANN.Neuron()
nrn.address(HICANN.L1Address(42))
nrn.activate_firing(True)
nrn.enable_spl1_output(True)
nrn.enable_fire_input(False)
nrn.enable_aout(True)
nrn.enable_current_input(True)
nquad = HICANN.NeuronQuad()
nquad[Coordinate.NeuronOnQuad(X(0), Y(0))] = nrn
HICANN.set_denmem_quad(self.h, Coordinate.QuadOnHICANN(0), nquad)
# NEURON CONFIG
nrn_cfg = HICANN.NeuronConfig()
nrn_cfg.bigcap.set(Coordinate.top)
HICANN.set_neuron_config(self.h, nrn_cfg)
# set ANALOG
ac = HICANN.Analog()
ac.set_membrane_top_even(Coordinate.AnalogOnHICANN(0))
HICANN.set_analog(self.h, ac)
# CURRENT STIMULUS
fg_config = HICANN.FGConfig()
fg_config.pulselength = 15
for block in [Enum(0), Enum(1)]:
block = Coordinate.FGBlockOnHICANN(block)
HICANN.set_fg_config(self.h, block, fg_config)
stimulus = HICANN.FGStimulus()
stimulus.setContinuous(True)
stimulus[:40] = [800] * 40
stimulus[40:] = [0] * (len(stimulus) - 40)
HICANN.set_current_stimulus(self.h,
Coordinate.FGBlockOnHICANN(Enum(0)),
stimulus)
# READOUT PULSES!
#configure merger tree, phase
tree = HICANN.MergerTree()
#default settings are OK
HICANN.set_merger_tree(self.h, tree)
HICANN.set_phase(self.h)
dnc_mergers = HICANN.DNCMergerLine()
for i in range(8):
# rcv from HICANN
mer = Coordinate.DNCMergerOnHICANN(i)
dnc_mergers[mer].config = HICANN.Merger.RIGHT_ONLY
dnc_mergers[mer].slow = False
dnc_mergers[mer].loopback = False
HICANN.set_dnc_merger(self.h, dnc_mergers)
# DNC and dnc_if:
gbit = Coordinate.GbitLinkOnHICANN(0)
gl = HICANN.GbitLink()
gl.dirs[gbit.value()] = HICANN.GbitLink.Direction.TO_DNC
gr = DNC.GbitReticle()
gr[self.h.to_HICANNOnDNC()] = gl
HICANN.set_gbit_link(self.h, gl)
DNC.set_hicann_directions(self.fpga, self.dnc, gr)
HICANN.flush(self.h)
rec_pulses = FPGA.receive(self.fpga, self.dnc, 10000)
# 10 ms
print(str(rec_pulses.size()) + " packets received")
self.assertGreater(rec_pulses.size(), 0)
# Check for correct addrss of spikes
for np in range(rec_pulses.size()):
pulse = rec_pulses.get(np)
self.assertEqual(HICANN.L1Address(42), pulse.getNeuronAddress())
self.assertEqual(gbit, pulse.getChannel())
self.assertEqual(self.hicann, pulse.getChipAddress())
self.assertEqual(self.dnc, pulse.getDncAddress())
#turn off links
gl.dirs[0] = HICANN.GbitLink.Direction.OFF
gr[Coordinate.HICANNOnDNC(Enum(0))] = gl
HICANN.set_gbit_link(self.h, gl)
DNC.set_hicann_directions(self.fpga, self.dnc, gr)
HICANN.flush(self.h)
# Setup Gbit Links and merger tree
sending_link = Coordinate.GbitLinkOnHICANN(0)
hicann.layer1[sending_link] = pyhalbe.HICANN.GbitLink.Direction.TO_HICANN
receiving_link = Coordinate.GbitLinkOnHICANN(1)
hicann.layer1[receiving_link] = pyhalbe.HICANN.GbitLink.Direction.TO_DNC
for m in iter_all(Coordinate.DNCMergerOnHICANN):
m = hicann.layer1[merger]
m.config = m.MERGE
m.slow = False
m.loopback = False
# sending link should loopback to receiving link
m = hicann.layer1[Coordinate.DNCMergerOnHICANN(sending_link.value())]
m.loopback = True
# Construct input spike train
spikes_raw = np.arange(20) * 1e-6 + 10e-6
more_spikes_raw = np.arange(20) * 1e-6 + spikes_raw[-1]*2
spikes_raw = np.concatenate([spikes_raw, more_spikes_raw])
duration = spikes_raw[-1] + 30e-6
spikes = pysthal.Vector_Spike()
for t in spikes_raw:
spikes.append(pysthal.Spike(in_addr, t))
hicann.sendSpikes(sending_link, spikes)
print(hicann)
