def figure() -> pylatex.Figure:
result = pylatex.Figure(position='!ht')
result._star_latex_name = True
result.add_image(
filename=str(pdf()),
width=None,
)
result.add_caption(pylatex.NoEscape(
r"""
\roy{\ESIS\ optical layout.
Dashed lines indicate the positions of unpopulated channels.
The blue lines represent the path of \OV\ through the system.} The \ESIS\ instrument is a pseudo-Gregorian design.
The secondary mirror is replaced by a segmented array of concave diffraction gratings.
The field stop at prime focus defines instrument spatial/spectral \FOV.
\CCDs\ are arrayed around the primary mirror, each associated with a particular grating.
Eight grating positions appear in this schematic; only six fit within the volume of the rocket payload.
\NumChannelsWords\ channels are populated for the first flight."""
))
result.append(kgpy.latex.Label('fig:layout'))
return result
def figure() -> pylatex.Figure:
result = pylatex.Figure()
result.add_image(str(pdf()), width=None)
result.add_caption(
pylatex.NoEscape(r"""
(Top) Measured reflectance for several multilayer coated witness samples
\roy{at an incidence angle of \gratingWitnessMeasurementIncidenceAngle\ on \testGratingDate.
The white regions indicate wavelengths that intercept the detector and the gray regions indicate wavelengths that
miss the detector.
Note the suppression of second order relative to the first order and the consistency of the coatings between each
channel.
The Channel \gratingWitnessMissingChannel\ grating measurement is missing due to issues in the measurement apparatus.
(Bottom) Comparison of the efficiency of the three main \ESIS\ optical components: primary mirror, grating and filter.
The primary mirror efficiency is based on measurements of a \Si\ witness sample taken on \primaryMeasurementDate\ at an
angle of incidence of \primaryWitnessMeasurementIncidenceAngle.
The grating efficiency is from a measurement of the Channel \testGratingChannelIndex\ grating taken on \testGratingDate\
at an angle of incidence of \gratingMeasurementIncidenceAngle.
The filter efficiency is a theoretical model that includes the filter mesh, \filterThickness\ of \filterMaterial\ and
\filterOxideThickness\ of \filterMaterial\ oxide.}"""))
result.append(kgpy.latex.Label('fig:componentEfficiencyVsWavelength'))
return result
def test_subfigure(self):
fig = plt.figure()
plt.plot([2, 3, 42, 1])
file_path = self._save_fig(fig)
with self.doc.create(pyl.Figure(position='h!')) as kittens:
w = str(0.25)
for i in range(8):
with self.doc.create(
pyl.SubFigure(
position='b',
width=pyl.NoEscape(w +
r'\linewidth'))) as left_kitten:
left_kitten.add_image(file_path,
width=pyl.NoEscape(r'\linewidth'))
left_kitten.add_caption(f'Kitten on the {i}')
if i % 4 == 3:
self.doc.append('\n')
kittens.add_caption("Two kittens")
def make_subfigure(self, fig_funcs, layout=(5, 4), close=True):
#todo figure out how to iterate properly
n = np.product(layout)
chunks = grouper(n, fig_funcs)
w = str(1/layout[1])
pbar = tqdm(total=len(fig_funcs))
for chunk in chunks:
with self.doc.create(pyl.Figure(position='ht')) as tex_fig:
for i, fig_func in enumerate(chunk):
if fig_func is None:
continue
with self.doc.create(pyl.SubFigure(position='b', width=pyl.NoEscape(w + r'\linewidth'))) as subfig:
fig = fig_func()
file_path = self._save_fig(fig, bbox_inches='tight') # todo access these kwargs
if close:
plt.close(fig)
subfig.add_image(file_path, width=pyl.NoEscape(r'\linewidth'))
if i % layout[1] == layout[1] - 1:
self.doc.append('\n')
pbar.update(1)
self.doc.append(pyl.NewPage())
def figure() -> pylatex.Figure:
result = pylatex.Figure(position='htb!')
result._star_latex_name = True
result.append(
kgpy.latex.aas.Gridline(
[kgpy.latex.aas.Fig(pdf(), kgpy.latex.textwidth, '(a)')]))
result.append(
kgpy.latex.aas.Gridline([
kgpy.latex.aas.LeftFig(schematic_primary.pdf(),
kgpy.latex.columnwidth, '(b)'),
kgpy.latex.aas.RightFig(schematic_grating.pdf(),
kgpy.latex.columnwidth, '(c)'),
]))
result.add_caption(
pylatex.NoEscape(
r"""(a) Schematic diagram of a single channel of the \ESIS\ optical system.
(b) Clear aperture of the primary mirror, size of the central obscuration, and the footprint of the beam for each
channel.
(c) Clear aperture of Channel 1's diffraction grating."""))
result.append(kgpy.latex.Label('fig:schematic'))
return result
def prepare_document(self, directory, subdirs=False, file_types='.png'):
"""
compile any pdf, jpg and png files
in directory into a latex pdf document
:return:
"""
if subdirs not in [True, False]:
raise errors.InputError(
'subdirs argument should be either True or False')
if isinstance(file_types, str):
file_types = [file_types]
if subdirs:
files = self.search_recursive(directory)
else:
files = self.search()
if files is []:
raise errors.InputError(
'''Cannot locate pdf, jpg or png files in "{}". Please
give the full path to where your model selection results are
plotted.
'''.format(directory))
doc = pylatex.Document(self.filename, documentclass='article')
for k, v in list(files.items()):
assert isinstance(v, list)
if v is not None:
with doc.create(
pylatex.Section(os.path.join(*Path(k).parts[-1:]))):
doc.append(k)
doc.append(pylatex.NoEscape(r'\\*'))
if len(v) == 1:
with doc.create(
pylatex.Figure(position='htbp!',
width=pylatex.NoEscape(
r'0.3\linewidth'))) as fig:
fig.add_image(v[0])
fig.add_caption(
os.path.join(*Path(v[0]).parts[-2:]))
# fig.add_label(v[0])
else:
with doc.create(
pylatex.Figure(
position='htbp!',
width=pylatex.NoEscape(r'\linewidth'),
)) as fig:
for i in range(len(v)):
with doc.create(
pylatex.SubFigure(
width=pylatex.NoEscape(
r'0.3\linewidth'))) as sub:
sub.add_image(v[i])
# sub.add_caption('')
if i % 3 == 0:
doc.append(pylatex.NoEscape(r'\break'))
# sub.add_label(i)
fig.add_caption(
os.path.join(*Path(v[i]).parts[-3:-1]))
doc.append(pylatex.NoEscape(r'\hfill'))
doc.generate_pdf()
LOG.info('PDF generated at "{}"'.format(doc.default_filepath))
def _add_fits(self,
doc,
fit_log,
fit_name,
operator_set,
ratio,
gap=False,
const=False):
with doc.create(pylatex.Center()) as centered:
if gap and const and util.ERR_PREC <= 4:
cols = "X[c] X[c] X[4,c] X[4,c] X[4,c] X[4,c] X[2,c] X[2,c] X[2,c] X[c]"
elif (gap or const) and util.ERR_PREC <= 4:
cols = "X[c] X[c] X[4,c] X[4,c] X[4,c] X[2,c] X[2,c] X[2,c] X[c]"
else:
cols = "X[c] X[c] X[4,c] X[4,c] X[2,c] X[2,c] X[2,c] X[c]"
with centered.create(pylatex.LongTabu(
cols, to=r"\linewidth")) as fit_table:
if ratio:
energy_header = r"$a_t \Delta E_{\rm fit}$"
else:
energy_header = r"$a_t E_{\rm fit}$"
header_row = [
pylatex.NoEscape(r"$t_{\rm min}$"),
pylatex.NoEscape(r"$t_{\rm max}$"),
pylatex.NoEscape(energy_header),
"A",
pylatex.NoEscape(r"$\chi^2 / \text{dof}$"),
pylatex.NoEscape(r"$p$-value"),
pylatex.NoEscape(r"$t_{\rm exc}$"),
pylatex.NoEscape(r"$\sigma_{\rm cut}$"),
]
if const and util.ERR_PREC <= 4:
header_row.insert(4, pylatex.NoEscape(r"const"))
if gap and util.ERR_PREC <= 4:
header_row.insert(4, pylatex.NoEscape(r"$a \Delta$"))
fit_table.add_row(header_row, mapper=[pylatex.utils.bold])
fit_table.add_hline()
fit_table.end_table_header()
for fit_info, fit_result in fit_log.fits.items():
value_row = [
fit_info.tmin,
fit_info.tmax,
fit_result.energy,
fit_result.amplitude,
round(fit_result.chisq, 2),
round(fit_result.quality, 2),
fit_info.exclude_times,
round(fit_info.noise_cutoff, 1),
]
if const and util.ERR_PREC <= 4:
value_row.insert(4, fit_result.const)
if gap and util.ERR_PREC <= 4:
value_row.insert(4, fit_result.gap)
fit_table.add_row(value_row)
if self.fit_plots:
for fit_info1, fit_info2 in zip(*[iter(fit_log.fits.keys())] * 2):
fit_plot1 = self.fit_plotfile(operator_set,
fit_name,
fit_info1,
extension=util.PlotExtension.pdf)
fit_plot2 = self.fit_plotfile(operator_set,
fit_name,
fit_info2,
extension=util.PlotExtension.pdf)
with doc.create(pylatex.Figure(position='H')) as fig:
with doc.create(
pylatex.SubFigure(position='b',
width=pylatex.NoEscape(
r'0.5\linewidth'))) as fig1:
caption = f"{fit_info1.model.short_name}, $t_{{\\rm fit}} = {fit_info1.tmin}, {fit_info1.tmax}$"
if fit_info1.ratio:
caption += " Ratio"
if fit_info1.exclude_times:
caption += f" $t_{{\\rm exc}}$ = {fit_info1.exclude_times}"
if fit_info1.noise_cutoff:
caption += f" $\sigma_{{\\rm cut}} = {fit_info1.noise_cutoff}$"
util.add_image(fig1,
self.results_dir,
fit_plot1,
width="1.0",
caption=caption)
with doc.create(
pylatex.SubFigure(position='b',
width=pylatex.NoEscape(
r'0.5\linewidth'))) as fig2:
caption = f"{fit_info2.model.short_name}, $t_{{\\rm fit}} = {fit_info2.tmin}, {fit_info2.tmax}$"
if fit_info1.ratio:
caption += " Ratio"
if fit_info2.exclude_times:
caption += f" $t_{{\\rm exc}}$ = {fit_info2.exclude_times}"
if fit_info2.noise_cutoff:
caption += f" $\sigma_{{\\rm cut}} = {fit_info2.noise_cutoff}$"
util.add_image(fig2,
self.results_dir,
fit_plot2,
width="1.0",
caption=caption)
if len(fit_log.fits) % 2 != 0:
fit_info = list(fit_log.fits.keys())[-1]
fit_plot = self.fit_plotfile(operator_set,
fit_name,
fit_info,
extension=util.PlotExtension.pdf)
with doc.create(pylatex.Figure(position='H')) as fig:
caption = f"{fit_info.model.short_name}, $t_{{\\rm fit}} = {fit_info.tmin}, {fit_info.tmax}$"
if fit_info.ratio:
caption += " Ratio"
if fit_info.exclude_times:
caption += f" $t_{{\\rm exc}}$ = {fit_info.exclude_times}"
if fit_info.noise_cutoff:
caption += f" $\sigma_{{\\rm cut}} = {fit_info.noise_cutoff}$"
util.add_image(fig,
self.results_dir,
fit_plot,
width="0.5",
caption=caption)
doc.append(pylatex.NoEscape(r"\newpage"))
def _add_tmins(self, doc, fit_infos, fit_name, operator_set, ratio):
for fit_info1, fit_info2 in zip(*[iter(fit_infos)] * 2):
fit_plot1 = self.tmin_fit_plotfile(
operator_set,
fit_name,
fit_info1,
extension=util.PlotExtension.pdf)
fit_plot2 = self.tmin_fit_plotfile(
operator_set,
fit_name,
fit_info2,
extension=util.PlotExtension.pdf)
with doc.create(pylatex.Figure(position='H')) as fig:
with doc.create(
pylatex.SubFigure(
position='b',
width=pylatex.NoEscape(r'0.5\linewidth'))) as fig1:
caption = f"{fit_info1.model.short_name}, $t_{{\\rm max}} = {fit_info1.tmax}$"
if fit_info1.ratio:
caption += " Ratio"
if fit_info1.exclude_times:
caption += f" $t_{{\\rm exc}}$ = {fit_info1.exclude_times}"
util.add_image(fig1,
self.results_dir,
fit_plot1,
width="1.0",
caption=caption)
with doc.create(
pylatex.SubFigure(
position='b',
width=pylatex.NoEscape(r'0.5\linewidth'))) as fig2:
caption = f"{fit_info2.model.short_name}, $t_{{\\rm max}} = {fit_info2.tmax}$"
if fit_info1.ratio:
caption += " Ratio"
if fit_info2.exclude_times:
caption += f" $t_{{\\rm exc}}$ = {fit_info2.exclude_times}"
util.add_image(fig2,
self.results_dir,
fit_plot2,
width="1.0",
caption=caption)
if len(fit_infos) % 2 != 0:
fit_info = list(fit_infos)[-1]
fit_plot = self.tmin_fit_plotfile(operator_set,
fit_name,
fit_info,
extension=util.PlotExtension.pdf)
with doc.create(pylatex.Figure(position='H')) as fig:
caption = f"{fit_info.model.short_name}, $t_{{\\rm max}} = {fit_info.tmax}$"
if fit_info.ratio:
caption += " Ratio"
if fit_info.exclude_times:
caption += f" $t_{{\\rm exc}}$ = {fit_info.exclude_times}"
util.add_image(fig,
self.results_dir,
fit_plot,
width="0.5",
caption=caption)
doc.append(pylatex.NoEscape(r"\newpage"))
def _add_data(doc: pl.Document, ds: Dataset, nr: NonRedundantization,
meth: MLMethod):
name = f'{ds.name}_{nr.name}_{meth.name}'
directory = ds.name
aVp_graph = f'{name}.jpg'
angle_dist_graph = f'{name}_angledistribution.jpg'
error_dist_graph = f'{name}_errordistribution.jpg'
sqerror_graph = f'{name}_sqerror_vs_actual.jpg'
stats_csv_all = f'{name}_stats_all.csv'
stats_csv_out = f'{name}_stats_out.csv'
actualVpred_file = os.path.join(directory, aVp_graph)
ang_dist_file = os.path.join(directory, angle_dist_graph)
error_dist_file = os.path.join(directory, error_dist_graph)
sqerror_file = os.path.join(directory, sqerror_graph)
df_all = pd.read_csv(os.path.join(directory, stats_csv_all))
df_out = pd.read_csv(os.path.join(directory, stats_csv_out))
with doc.create(pl.Section(f'Method: {ds.name}, {nr.name}, {meth.name}')):
with doc.create(pl.Subsection('Summary of method:')):
doc.append(f'Dataset: {ds.name}')
doc.append(f'\nNon-redundantization: {nr.name}')
doc.append(f'\nType of machine learning used: {meth.name}')
with doc.create(pl.Subsection('Summary of the data:')):
with doc.create(pl.Figure(position='!htbp')) as actualVpred:
actualVpred.add_image(actualVpred_file, width='300px')
actualVpred.add_caption(
'Graph showing the predicted packing angle against the actual packing angle, when using the above specified methods of non-redundetization and machine learning.'
)
with doc.create(pl.Table(position='!htbp')) as table:
table.add_caption('Summary of results for all data')
table.append(pl.Command('centering'))
table.append(pl.NoEscape(df_all.to_latex(escape=False)))
with doc.create(pl.Table(position='!htbp')) as table:
table.add_caption('Summary of results for outliers.')
table.append(pl.Command('centering'))
table.append(pl.NoEscape(df_out.to_latex(escape=False)))
with doc.create(pl.Figure(position='!htbp')) as graphs:
with doc.create(
pl.SubFigure(position='!htbp',
width=pl.NoEscape(
r'0.30\linewidth'))) as ang_dist_graph:
ang_dist_graph.add_image(ang_dist_file,
width=pl.NoEscape(r'\linewidth'))
ang_dist_graph.add_caption(
'Frequency distribution of the packing angle.')
with doc.create(
pl.SubFigure(position='!htbp',
width=pl.NoEscape(
r'0.33\linewidth'))) as error_dist_graph:
error_dist_graph.add_image(error_dist_file,
width=pl.NoEscape(r'\linewidth'))
error_dist_graph.add_caption(
'Distribution of errors calculated as the difference between the predicted and actual interface angle.'
)
with doc.create(
pl.SubFigure(position='!htbp',
width=pl.NoEscape(
r'0.33\linewidth'))) as sqerror_graph:
sqerror_graph.add_image(sqerror_file,
width=pl.NoEscape(r'\linewidth'))
sqerror_graph.add_caption(
'Squared error in predicted packing angle against actual packing angle.'
)
graphs.add_caption('Graphs for further metrics.')
def fit_all_in_one(config):
"""fit all grid points, and compose PDF reports
A PDF includes fitted resolution function plot, a table of fitting parameters,
a grid plot of interpolated resolution functions,
and plots of comparison between the simulated and fitted resolution functions.
"""
import pylatex, dill
Ei = config.Ei
Erange = (-0.3 * Ei, .95 * Ei)
width = r'1\textwidth'
for sl in config.slices:
doc = _wph.initReportDoc("%s-fit-report" % sl.name) # report document
qaxis = sl.grid.qaxis
Eaxis = sl.grid.Eaxis
# info
_wph.slice_info_section(sl, doc)
# fit
with doc.create(pylatex.Section('Fit resolution functions on grid')):
# path to saved result
path = '%s-fit_all_grid_points.dill' % sl.name
if os.path.exists(path):
qE2fitter, nofit = dill.load(open(path))
else:
qE2fitter, nofit = fit_all_grid_points(sl,
config,
use_cache=True)
dill.dump((qE2fitter, nofit), open(path, 'w'), recurse=True)
# plot
with doc.create(pylatex.Figure(position='htbp')) as plot:
plt.figure()
plot_resfits_on_grid(qE2fitter, sl, config, figsize=(10, 10))
plot.add_plot(width=pylatex.NoEscape(width))
plot.add_caption('Fitted resolution functions for %s' %
sl.name)
plt.close()
doc.append(pylatex.utils.NoEscape(r"\clearpage"))
# save
pklfile = '%s-fit_results.pkl' % sl.name
save_fits_as_pickle(qE2fitter, pklfile)
import pickle as pkl
qE2fitres = pkl.load(open(pklfile))
# parameters
with doc.create(pylatex.Subsection('Fitted parameters')):
s = format_parameter_table(qE2fitres)
doc.append(_wph.verbatim(s))
# interpolated model
with doc.create(pylatex.Subsection('Interpolated model')):
imodel = get_interped_resolution_model(sl)
qs = (qaxis.ticks() + qaxis.step / 2.)[:-1]
Es = (Eaxis.ticks() + Eaxis.step / 2.)[:-1]
dqgrid, dEgrid = qE2fitter.values()[0].qEgrids
# plot
with doc.create(pylatex.Figure(position='htbp')) as plot:
plt.figure()
plot_interpolated_resolution_on_grid(imodel,
qs,
Es,
dqgrid,
dEgrid,
figsize=(10, 10))
plot.add_plot(width=pylatex.NoEscape(width))
plot.add_caption('Interpolated resolution functions for %s' %
sl.name)
plt.close()
doc.append(pylatex.utils.NoEscape(r"\clearpage"))
# one by one comparison plots
with doc.create(
pylatex.Section('Comparing fits to mcvine simulations')):
for qE, fitter in qE2fitter.items():
with doc.create(pylatex.Figure(position='htbp')) as plot:
plt.figure()
plot_compare_fit_to_data(fitter)
plot.add_plot(width=pylatex.NoEscape(width))
plot.add_caption('Resolution at q=%s, E=%s' % qE)
plt.close()
doc.append(
pylatex.utils.NoEscape(r"\clearpage")
) # otherwise latex complain about "too many floats"
# save PDF
doc.generate_pdf(clean_tex=False)
continue
return
def simulate_all_in_one(config):
"""simulate all grid points, and compose PDF reports
A PDF includes basic info, a plot of dynamical range, and a plot of simulated resolution functions
on a grid.
"""
import pylatex
Ei = config.Ei
Erange = (-0.3 * Ei, .95 * Ei)
for sl in config.slices:
doc = _wph.initReportDoc("%s-sim-report" % sl.name) # report document
# info
_wph.slice_info_section(sl, doc)
qaxis = sl.grid.qaxis
Eaxis = sl.grid.Eaxis
# dyn range plot
# larger q range for a broader view
ratio = 1.
expanded_qaxis = sx.axis(
min=qaxis.min - (qaxis.max - qaxis.min) * ratio / 2,
max=qaxis.max + (qaxis.max - qaxis.min) * ratio / 2,
step=qaxis.step).ticks()
width = r'1\textwidth'
with doc.create(pylatex.Section('Dynamical range')):
with doc.create(pylatex.Figure(position='htbp')) as plot:
plt.figure()
plotDynRange(sl.hkl0,
sl.hkl_projection,
qaxis=expanded_qaxis,
Erange=Erange,
config=config)
plot.add_plot(width=pylatex.NoEscape(width))
plot.add_caption('Dynamical range for slice %s' % sl.name)
plt.close()
# simulate
with doc.create(
pylatex.Section('Simulated resolution functions on a grid')):
outputs, failed = simulate_all_grid_points(
slice=sl,
config=config,
Nrounds_beam=config.sim_Nrounds_beam,
overwrite=False)
if failed:
# this seems unecessary as what is missing is clear in the plot
"""
doc.append("Failed to calculate resolution functions for the following (Q,E) pairs:")
with doc.create(pylatex.Itemize()) as itemize:
for f in failed:
itemize.add_item(str(f))
"""
pass
# plot
with doc.create(pylatex.Figure(position='htbp')) as plot:
plt.figure()
plot_resolution_on_grid(sl, config, figsize=(10, 10))
plot.add_plot(width=pylatex.NoEscape(width))
plot.add_caption('Simulated resolution functions for %s' %
sl.name)
plt.close()
# save pdf
doc.generate_pdf(clean_tex=False)
continue
return
def makeInteractionFigure(self, ker, cum, n_terms):
"""
Create figure for interaction analysis, which includes a subfigure of
the latest additive component and a subfigure of posterior of the overall
compositional kernel up to now.
:param ker: latest additive component to be plotted
:type ker: GPCKernel
:param cum: overall compositional kernel up to and including `ker`
:type cum: GPCKernel
:param n_terms: number of additive terms considered in `cum` so far
"""
assert isinstance(ker, GPCKernel), 'Kernel must be of type GPCKernel'
assert isinstance(cum, GPCKernel), 'Kernel must be of type GPCKernel'
doc = self.doc
kerDims = ker.getActiveDims()
cumDims = cum.getActiveDims()
img1Name = 'additive{0}ker'.format(n_terms)
img1Format = '.eps' if len(kerDims) != 3 else '.png'
img1Filename = img1Name + img1Format
ker.draw(os.path.join(self.path, img1Name), active_dims_only=True)
if n_terms == 1 or len(cumDims) > 3:
# Only present current additive component
caption_str = r"Trained classifier on " + dims2text(
kerDims, ker.data) + "."
with doc.create(pl.Figure(position='htbp!')) as fig:
fig.add_image(img1Filename,
width=ut.NoEscape(r'0.7\textwidth'))
fig.add_caption(ut.NoEscape(caption_str))
self.fignum += 1
else:
# Present both current component and cumulative kernel
img2Name = 'additive{0}cum'.format(n_terms)
img2Format = '.eps' if len(cumDims) != 3 else '.png'
img2Filename = img2Name + img2Format
cum.draw(os.path.join(self.path, img2Name), active_dims_only=True)
caption1_str = r"Current additive component involving " + dims2text(
kerDims, ker.data) + "."
caption2_str = r"Previous and current components combined, involving " + dims2text(
cumDims, cum.data) + "."
caption_str = r"Trained classifier on " + dims2text(
cumDims, cum.data) + "."
with doc.create(pl.Figure(position='htbp!')) as fig:
with doc.create(
pl.SubFigure(
position='b',
width=ut.NoEscape(r'0.47\textwidth'))) as subfig1:
subfig1.add_image(img1Filename,
width=ut.NoEscape(r'\textwidth'))
subfig1.add_caption(ut.NoEscape(caption1_str))
doc.append(ut.NoEscape(r'\hfill'))
with doc.create(
pl.SubFigure(
position='b',
width=ut.NoEscape(r'0.47\textwidth'))) as subfig2:
subfig2.add_image(img2Filename,
width=ut.NoEscape(r'\textwidth'))
subfig2.add_caption(ut.NoEscape(caption2_str))
fig.add_caption(ut.NoEscape(caption_str))
self.fignum += 1
def describeOneVariable(self, ker):
"""
Generate a subsection describing a particular variable.
:param ker:
:type ker:
"""
assert isinstance(ker, GPCKernel), 'Argument must be of type GPCKernel'
assert len(
ker.getActiveDims()) == 1, 'The kernel must be one-dimensional'
dim = ker.getActiveDims()[0]
data = ker.data
ds = data.getDataShape()
xmu, xsd, xmin, xmax = ds['x_mu'][dim], ds['x_sd'][dim], ds['x_min'][
dim], ds['x_max'][dim]
error = ker.error()
mon = ker.monotonicity()
per = ker.period()
doc = self.doc
with doc.create(
pl.Subsection(ut.NoEscape(dims2text([dim], data, cap=True)))):
# Routine description
s = dims2text([dim], data, cap=True) + " has " \
+ "mean value {0:.2f} and standard deviation {1:.2f}. ".format(xmu, xsd) \
+ "Its observed minimum and maximum are {0:.2f} and {1:.2f} respectively. ".format(xmin, xmax) \
+ "A GP classifier trained on this variable alone can achieve " \
+ r"a cross-validated classification error of {0:.2f}\%. ".format(error * 100)
# Significance
s += "\n\n"
e0 = float(self.constker.error())
if error / e0 < 0.25:
s += "Compared with the null model (baseline), this variable "
s += "contains strong evidence whether the sample belongs to "
s += "class `{0}'. ".format(data.YLabel[1])
elif error / e0 < 0.8:
s += "Compared with the null model (baseline), this variable "
s += "contains some evidence of class label assignment. "
elif error / e0 < 1.0:
s += "This variable provides little evidence of class label "
s += r"assignment given a baseline error rate of {0:.2f}\%. ".format(
e0 * 100)
else:
s += "The classification performance (in terms of error rate) "
s += "based on this variable alone is even worse than "
s += r'that of the na{\"i}ve baseline classifier. '
# Monotonicity and periodicity - only do this for significant factors
if error / e0 < 0.8:
if mon != 0:
corr_str = "positive" if mon > 0 else "negative"
s += "There is a " + corr_str + " correlation between the value "
s += "of this variable and the likelihood of the sample being "
s += "classified as positive. "
elif per != 0:
s += "The class assignment is approximately periodic with "
s += dims2text([dim], data) + ". "
s += "The period is about {0:.2f}. ".format(per)
else:
s += "No significant monotonicity or periodicity "
s += "is associated with this variable. "
s += "The GP posterior trained on this variable is plotted in Figure {0}. ".format(
self.fignum)
doc.append(ut.NoEscape(s))
# Plotting
imgName = 'var{0}'.format(dim)
imgFormat = '.eps'
imgFilename = imgName + imgFormat
ker.draw(os.path.join(self.path, imgName), active_dims_only=True)
caption_str = r"Trained classifier on " + dims2text([dim],
ker.data) + "."
with doc.create(pl.Figure(position='htbp!')) as fig:
fig.add_image(imgFilename, width=ut.NoEscape(r'0.7\textwidth'))
fig.add_caption(ut.NoEscape(caption_str))
self.fignum += 1
def _place_figure(file_path, width=r"\textwidth", doc=None):
with doc.create(pyl.Figure(position="H")) as tex_fig:
tex_fig.add_image(str(file_path), width=pyl.NoEscape(width))
def create_overleaf_files(overleaf):
files = []
articles = get_project_articles(FIGSHARE_PROJECT_ID)
#print(articles)
for article in articles:
#print(article['title'])
newfiles = get_files_of_article(article['id'])
for i, f in enumerate(newfiles):
newfiles[i]['article_id'] = article['id']
newfiles[i]['article_name'] = article['title']
files += newfiles
fdf = pd.DataFrame(files)
#print("fdf",fdf)
fdf.sort_values(by=['article_id', 'article_name', 'name'])
fdfo = fdf[['article_id', 'article_name', 'name']]
fdfo = fdfo.merge(overleaf[['article_id', 'name', 'overleaf']],
on=['article_id', 'name'],
how='outer')
#print("fdfo", fdfo)
fdfo = fdfo.where(pd.notnull(fdfo), None)
for_download = overleaf.merge(fdf[['article_id', 'name', 'download_url']],
on=['article_id', 'name'])
#print("for_download",for_download)
# create individual files
for row in for_download.iterrows():
if len(row[1]['overleaf']) > 0:
download_url = row[1]['download_url']
file = raw_issue_request('GET', download_url, binary=True)
if '.pkl' in row[1]['name']:
with open(
'/mnt/labbook/output/untracked/tmp_overleaf-{}/{}'.
format(head, row[1]['name']), 'wb') as f:
f.write(file)
df = pd.read_pickle(
'/mnt/labbook/output/untracked/tmp_overleaf-{}/{}'.format(
head, row[1]['name']))
df.to_latex(
'/mnt/labbook/output/untracked/overleaf-{}/figshare/{}.tex'
.format(head, row[1]['overleaf']))
repo.git.add('figshare/{}.tex'.format(row[1]['overleaf']))
else:
extension = row[1]['name'].split('.')[-1]
with open(
'/mnt/labbook/output/untracked/overleaf-{}/figshare/{}.{}'
.format(head, row[1]['overleaf'],
extension), 'wb') as f:
f.write(file)
repo.git.add('figshare/{}.{}'.format(
row[1]['overleaf'], extension))
# create bibliography file
adf = pd.DataFrame(articles)
#print(adf)
bib_data = BibliographyData()
for row in for_download.iterrows():
if len(row[1]['overleaf']) > 0:
idx = adf[adf['id'] == row[1]['article_id']].index[0]
bib_data.add_entry(key=row[1]['overleaf'],
entry=Entry('article', [
('title', adf.at[idx, 'title']),
('journal', "figshare"),
('doi', adf.at[idx, 'doi']),
]))
bib_data.to_file(
'/mnt/labbook/output/untracked/overleaf-{}/figures_tables.bib'.format(
head))
repo.git.add('figures_tables.bib')
# write supplementary tex
geometry_options = {"tmargin": "1cm", "lmargin": "1cm"}
doc = ltx.Document(geometry_options=geometry_options)
doc.preamble.append(ltx.Package('biblatex', options=['sorting=none']))
doc.preamble.append(
ltx.Command('addbibresource',
arguments=[ltx.NoEscape("figures_tables.bib")]))
doc.preamble.append(ltx.Package('booktabs'))
doc.preamble.append(ltx.Package('longtable'))
with doc.create(ltx.Subsection('images and tables supplementary file')):
for row in for_download.iterrows():
if len(row[1]['overleaf']) > 0:
idx = adf[adf['id'] == row[1]['article_id']].index[0]
#print("The name is...",row[1]['name'])
if '.pkl' in row[1]['name']:
#print("I should be including something here")
with doc.create(ltx.Table(position='hbt')) as table_holder:
table_holder.append(
ltx.Command('input',
arguments=[
ltx.NoEscape(
"figshare/{}.tex".format(
row[1]['overleaf']))
]))
if row[1]['caption'] is not None:
table_holder.add_caption(row[1]['caption'])
with open(
"/mnt/labbook/output/untracked/overleaf-{}/figshare/{}_caption.tex"
.format(head, row[1]['overleaf']),
"w") as text_file:
text_file.write(row[1]['caption'])
else:
table_holder.add_caption(adf.at[idx, 'title'])
with open(
"/mnt/labbook/output/untracked/overleaf-{}/figshare/{}_caption.tex"
.format(head, row[1]['overleaf']),
"w") as text_file:
text_file.write(adf.at[idx, 'title'])
repo.git.add('figshare/{}_caption.tex'.format(
row[1]['overleaf']))
table_holder.append(
ltx.Command(
'cite',
arguments=[ltx.NoEscape(row[1]['overleaf'])]))
else:
with doc.create(
ltx.Figure(position='hbt')) as image_holder:
image_holder.add_image('figshare/{}'.format(
row[1]['overleaf']))
#print("THE CAPTION IS:", row[1]['caption'])
if row[1]['caption'] is not None:
image_holder.add_caption(row[1]['caption'])
with open(
"/mnt/labbook/output/untracked/overleaf-{}/figshare/{}_caption.tex"
.format(head, row[1]['overleaf']),
"w") as text_file:
text_file.write(
ltx.utils.escape_latex(row[1]['caption']))
else:
image_holder.add_caption(
ltx.utils.escape_latex(adf.at[idx, 'title']))
with open(
"/mnt/labbook/output/untracked/overleaf-{}/figshare/{}_caption.tex"
.format(head, row[1]['overleaf']),
"w") as text_file:
text_file.write(
ltx.utils.escape_latex(adf.at[idx,
'title']))
repo.git.add('figshare/{}_caption.tex'.format(
row[1]['overleaf']))
image_holder.append(
ltx.Command(
'cite',
arguments=[ltx.NoEscape(row[1]['overleaf'])]))
doc.append(ltx.Command('printbibliography'))
doc.generate_tex(
'/mnt/labbook/output/untracked/overleaf-{}/supplementary'.format(head))
repo.git.add('supplementary.tex')
def add_correlator(doc, task_handler, correlator, name, obs_handler):
operator_src = operator_info.operator.Operator(correlator.getSource())
subtractvev = task_handler.subtractvev and operator_src.channel.vev
if correlator.isSinkSourceSame():
left_pdf_file = task_handler.correlator_plotfile(
correlator, name, extension=PlotExtension.pdf)
right_pdf_file = task_handler.energy_plotfile(
operator_src, name, extension=PlotExtension.pdf)
else:
left_pdf_file = task_handler.correlator_plotfile(
correlator,
name,
complex_arg=sigmond.ComplexArg.RealPart,
extension=PlotExtension.pdf)
right_pdf_file = task_handler.correlator_plotfile(
correlator,
name,
complex_arg=sigmond.ComplexArg.ImaginaryPart,
extension=PlotExtension.pdf)
if correlator.isSinkSourceSame():
left_estimates = sigmond.getCorrelatorEstimates(
obs_handler, correlator, task_handler.hermitian, subtractvev,
sigmond.ComplexArg.RealPart, task_handler.sampling_mode)
right_estimates = sigmond.getEffectiveEnergy(
obs_handler, correlator, task_handler.hermitian, subtractvev,
sigmond.ComplexArg.RealPart, task_handler.sampling_mode,
task_handler.plot_info.timestep,
task_handler.plot_info.eff_energy_type.value, 0.)
else:
left_estimates = sigmond.getCorrelatorEstimates(
obs_handler, correlator, task_handler.hermitian, subtractvev,
sigmond.ComplexArg.RealPart, task_handler.sampling_mode)
right_estimates = sigmond.getCorrelatorEstimates(
obs_handler, correlator, task_handler.hermitian, subtractvev,
sigmond.ComplexArg.ImaginaryPart, task_handler.sampling_mode)
if correlator.isSinkSourceSame():
doc.append(pylatex.NoEscape(rf"Score: {score(left_estimates)}"))
with doc.create(pylatex.Figure(position='H')):
with doc.create(
pylatex.SubFigure(
position='b',
width=pylatex.NoEscape(r'0.5\linewidth'))) as left_fig:
add_image(left_fig,
task_handler.results_dir,
left_pdf_file,
width="1.0")
with doc.create(
pylatex.SubFigure(
position='b',
width=pylatex.NoEscape(r'0.5\linewidth'))) as right_fig:
add_image(right_fig,
task_handler.results_dir,
right_pdf_file,
width="1.0")
if correlator.isSinkSourceSame():
header_row = [
pylatex.NoEscape(r"$t$"),
pylatex.NoEscape(r"$C(t)$"),
pylatex.NoEscape(r"$\delta C(t)$"),
]
if task_handler.plot_info.eff_energy_type.value < 2:
header_row.extend([
pylatex.NoEscape(
rf"$a_t E_{{\rm eff}} (t + {task_handler.plot_info.timestep}/2)$"
),
pylatex.NoEscape(
rf"$\delta a_t E_{{\rm eff}} (t + {task_handler.plot_info.timestep}/2)$"
),
])
else:
header_row.extend([
pylatex.NoEscape(r"$a_t E_{\rm eff} (t)$"),
pylatex.NoEscape(r"$\delta a_t E_{\rm eff} (t)$"),
])
else:
header_row = [
pylatex.NoEscape(r"$t$"),
pylatex.NoEscape(r"$Re C(t)$"),
pylatex.NoEscape(r"$\delta Re C(t)$"),
pylatex.NoEscape(r"$Im C(t)$"),
pylatex.NoEscape(r"$\delta Im C(t)$")
]
with doc.create(pylatex.Center()) as centered:
with centered.create(
pylatex.LongTabu("X[c] X[2,c] X[2,c] X[2,c] X[2,c]",
to=r"\linewidth")) as data_table:
data_table.add_row(header_row, mapper=[pylatex.utils.bold])
data_table.add_hline()
data_table.end_table_header()
for t in sorted(left_estimates.keys()):
left_value = left_estimates[t].getFullEstimate()
left_error = left_estimates[t].getSymmetricError()
left_est = nice_value(left_value, left_error)
left_rel_error = round(left_estimates[t].getRelativeError(), 4)
t_right = t
if correlator.isSinkSourceSame(
) and task_handler.plot_info.eff_energy_type.value < 2:
t_right = t + 0.5 * task_handler.plot_info.timestep
if t_right in right_estimates:
right_value = right_estimates[t_right].getFullEstimate()
right_error = right_estimates[t_right].getSymmetricError()
right_est = nice_value(right_value, right_error)
right_rel_error = round(
right_estimates[t_right].getRelativeError(), 4)
else:
right_est = ""
right_rel_error = ""
row = [
int(t), left_est, left_rel_error, right_est,
right_rel_error
]
data_table.add_row(row)
doc.append(pylatex.NoEscape(r"\newpage"))
def perfromance_report(self, save_pdf=False, pdf_name='analyzer_report'):
"""
Generate performance report. By default, images of confusion matrix and performance metrics will be saved.
If save_pdf is True, a pdf will also be saved.
Output will be saved in self.output_dir
Parameters
----------
save_pdf : bool, optional
If True, pdf report will be saved.
pdf_name : str, optional
PDF report file name, used only if save_pdf is True.
Returns
-------
None.
"""
# save confusion matrix
if self.bbox_match_method == 'iou':
title_str = 'Match Pred Method = IOU\nScore_th = {} | IOU_th = {}'.format(
self.score_th, self.iou_th)
elif self.bbox_match_method == 'pred_bbox_center':
title_str = 'Match Pred Method = Centers\nScore_th = {}'.format(
self.score_th, self.bbox_match_method)
image_path_cm = os.path.join(self.output_dir,
'total confusion matrix.png')
h_ax, h_fig = ConfusionMatrix.plot_confusion_matrix(
self.cm,
display_labels=self.class_names,
add_miss_detection_col=self.add_miss_detection_col,
add_false_detection_row=self.add_false_detection_row,
title_str=title_str,
display=False,
save_fig_name=image_path_cm,
)
# save performance metrics
# text files
self.metrics_tables['global'].to_csv(
os.path.join(self.output_dir, 'global metrics.csv'))
self.metrics_tables['class'].to_csv(
os.path.join(self.output_dir, 'class metrics.csv'))
# images
image_path_class_metrics = os.path.join(self.output_dir,
'class metrics.png')
image_path_global_metrics = os.path.join(self.output_dir,
'global metrics.png')
dfi.export(self.metrics_tables['class'], image_path_class_metrics)
dfi.export(self.metrics_tables['global'], image_path_global_metrics)
# save pdf report
if save_pdf:
doc = pylatex.Document(geometry_options={'margin': '0.2in'})
doc.preamble.append(pylatex.Command('title', 'Analyzer Report'))
doc.preamble.append(
pylatex.Command('date', pylatex.NoEscape(r'\today')))
doc.append(pylatex.NoEscape(r'\maketitle'))
# plot confusion matrix
with doc.create(pylatex.Section('Confusion Matrix')):
with doc.create(pylatex.Figure(position='h!')) as fig:
fig.add_image(image_path_cm, placement='center')
# global metrics
with doc.create(pylatex.Section('Performance Metrics')):
# with doc.create(pylatex.Section('Global Metrics')):
with doc.create(pylatex.Figure(position='h!')) as fig:
fig.add_image(image_path_global_metrics,
width=200,
placement='center')
# class metrics
# with doc.create(pylatex.Section('Class Metrics')):
with doc.create(pylatex.Figure(position='h!')) as fig:
fig.add_image(image_path_class_metrics, placement='center')
# save report
output_full_name = '{}'.format(pdf_name)
report_file = os.path.abspath(
os.path.join(self.output_dir, output_full_name))
doc.generate_pdf(report_file,
clean_tex=True,
compiler='pdflatex',
silent=True)
pass
def _add_data(doc: pl.Document, dataset):
name = f'{dataset}_NR2_GBReg'
directory = dataset
aVp_graph = f'{name}.jpg'
angle_dist_graph = f'{name}_angledistribution.jpg'
error_dist_graph = f'{name}_errordistribution.jpg'
sqerror_graph = f'{name}_sqerror_vs_actual.jpg'
stats_csv_all = f'{name}_stats_all.csv'
stats_csv_out = f'{name}_stats_out.csv'
actualVpred_file = os.path.join(directory, aVp_graph)
ang_dist_file = os.path.join(directory, angle_dist_graph)
error_dist_file = os.path.join(directory, error_dist_graph)
sqerror_file = os.path.join(directory, sqerror_graph)
df_all = pd.read_csv(os.path.join(directory, stats_csv_all))
df_out = pd.read_csv(os.path.join(directory, stats_csv_out))
with doc.create(pl.Section(f'Results')):
with doc.create(pl.Subsection('Summary of method:')):
doc.append('Trained on PreAF2 dataset.')
doc.append('\n')
doc.append(f'Dataset tested: {dataset}')
doc.append('\n')
doc.append(f'GBR parameters: {gbr_params}.')
doc.append('\n')
with doc.create(pl.Subsection('Summary of the data:')):
with doc.create(pl.Figure(position='!htbp')) as actualVpred:
actualVpred.add_image(actualVpred_file, width='300px')
actualVpred.add_caption(
'Graph showing the predicted packing angle against the actual packing angle.'
)
with doc.create(pl.Table(position='!htbp')) as table:
table.add_caption('Summary of results for all data')
table.append(pl.Command('centering'))
table.append(pl.NoEscape(df_all.to_latex(escape=False)))
with doc.create(pl.Table(position='!htbp')) as table:
table.add_caption('Summary of results for outliers.')
table.append(pl.Command('centering'))
table.append(pl.NoEscape(df_out.to_latex(escape=False)))
with doc.create(pl.Figure(position='!htbp')) as graphs:
with doc.create(
pl.SubFigure(position='!htbp',
width=pl.NoEscape(
r'0.30\linewidth'))) as ang_dist_graph:
ang_dist_graph.add_image(ang_dist_file,
width=pl.NoEscape(r'\linewidth'))
ang_dist_graph.add_caption(
'Frequency distribution of the packing angle.')
with doc.create(
pl.SubFigure(position='!htbp',
width=pl.NoEscape(
r'0.33\linewidth'))) as error_dist_graph:
error_dist_graph.add_image(error_dist_file,
width=pl.NoEscape(r'\linewidth'))
error_dist_graph.add_caption(
'Distribution of errors calculated as the difference between the predicted and actual interface \
angle.')
with doc.create(
pl.SubFigure(position='!htbp',
width=pl.NoEscape(
r'0.33\linewidth'))) as sqerror_graph:
sqerror_graph.add_image(sqerror_file,
width=pl.NoEscape(r'\linewidth'))
sqerror_graph.add_caption(
'Squared error in predicted packing angle against actual packing angle.'
)
graphs.add_caption('Graphs for further metrics.')
