def setup(self):
self.set_name('STA LTA')
self.add_parameter(Param('Short Window [s]', 'swin', 30., 0.01, 2 * h))
self.add_parameter(Param('Ratio', 'ratio', 3., 1.1, 20.))
self.add_parameter(Param('Level', 'level', 0.5, 0., 1.))
self.add_parameter(
Param(
'Processing Block length (rel. to long window)',
'block_factor',
10.,
2.,
100.,
))
self.add_parameter(
Switch('Show trigger level traces', 'show_level_traces', False))
self.add_parameter(
Switch('Apply to full dataset', 'apply_to_all', False))
self.add_parameter(
Choice('Variant', 'variant', 'centered', ['centered', 'right']))
self.add_parameter(
Choice('Scaling/Normalization method', 'scalingmethod', '[0-1]',
scalingmethods))
self.add_parameter(Switch('Detect on sum trace', 'apply_to_sum',
False))
self.set_live_update(False)
def setup(self):
self._responses = None
self.add_parameter(Param('geom. spreading', 'const_a', 1.11, 1., 2.))
self.add_parameter(
Param('anelastic attenuation', 'const_b', 0.00189, 0., 1.))
self.add_parameter(
Param('static magnification', 'const_c', -2.09, -5., 5.))
self.add_parameter(
Param('Duration for "fixed" time window', 'duration_fixed', 200.,
1., 500.))
self.add_parameter(
Choice('Time window', 'time_window', 'visible / selected',
['visible / selected', 'fixed', 'distance dependent']))
self.add_parameter(
Choice('Apply to', 'apply_to', 'active event',
['active event', 'selected events', 'all events']))
self.add_parameter(
Switch('Show restituted traces', 'show_restituded_traces', False))
self.add_parameter(Switch('Mark readings', 'show_markers', False))
self.add_parameter(Switch('Show plot', 'show_plot', False))
self.add_parameter(Switch('Show message', 'do_show_message', True))
self.add_parameter(
Switch('Needs restitution', 'needs_restitution', False))
self.add_parameter(
Switch('Set event magnitude', 'modify_inplace', False))
self.set_name('Local Magnitude')
self.set_live_update(False)
self.vmin = 1500.
self.vmax = 6000.
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Ahfullgreen')
self.add_parameter(Param('Time', 'time', 0.0, -50., 50.))
self.add_parameter(Param('North shift [km]', 'north_km', 10.0, -100., 100.))
self.add_parameter(Param('East shift [km]', 'east_km', 10.0, -100., 100.))
self.add_parameter(Param('Depth', 'depth_km', 10.0, 0.0, 600.0))
self.add_parameter(Param('Moment', 'moment', 1., 1., 1E10))
self.add_parameter(Param('Strike', 'strike', 0., -180., 180.))
self.add_parameter(Param('Dip', 'dip', 90., 0., 90.))
self.add_parameter(Param('Rake', 'rake', 0., -180., 180.))
self.add_parameter(Param('sampling rate [Hz]', 'fsampling', 1000., 1.,
10000.0))
self.add_parameter(Param('vp [km/s]', 'vp', 6.0, 0.0, 10.0))
self.add_parameter(Param('vs [km/s]', 'vs', 3.0, 0.0, 10.0))
self.add_parameter(Param('Density [kg/m3]', 'density', 3000. , 0.0, 10000.0))
self.add_parameter(Param('Qp', 'qp', 200.0, 0.0, 10000.0))
self.add_parameter(Param('Qs', 'qs', 100.0, 0.0, 10000.0))
self.add_parameter(Param('tau', 'tau', 0.1, 0.0, 2.0))
self.add_parameter(Choice(
'source shape', 'stf', 'Impulse', ['Gauss', 'Impulse']))
self.add_parameter(Choice(
'Waveform type', 'quantity', 'Displacement [m]',
['Displacement [m]', 'Velocity [m/s]', 'Acceleration [m/s2]']))
self.add_parameter(Switch('near field', 'want_near', True))
self.add_parameter(Switch('intermediate field', 'want_intermediate', True))
self.add_parameter(Switch('far field', 'want_far', True))
self.add_trigger('Set Params from Event', self.mechanism_from_event)
self.offline_config = None
def setup(self):
self.set_name("Beam Forming")
self.add_parameter(
Param('Center lat', 'lat_c', 90., -90., 90., high_is_none=True))
self.add_parameter(
Param('Center lon', 'lon_c', 180., -180., 180., high_is_none=True))
self.add_parameter(Param('Back azimuth', 'bazi', 0., 0., 360.))
self.add_parameter(Param('slowness', 'slow', 0.1, 0., 1.))
self.add_parameter(
Choice('slowness unit', 'unit', 's/km', ['s/km', 's/deg']))
self.add_parameter(
Choice('Treat different dt by', 'diff_dt_treat', 'oversample',
['oversample', 'downsample']))
self.add_parameter(
Switch('pre-normalize by std ', 'normalize_std', False))
self.add_parameter(
Switch('multiply 1/[no. of traces]', 'post_normalize', False))
self.add_parameter(Switch('Add Shifted Traces', 'add_shifted', False))
self.add_trigger('plot', self.plot)
self.add_trigger('Save Station', self.save_station)
self.add_trigger('Save Traces', self.save)
self.add_trigger('Set center by mean lat/lon', self.set_center_latlon)
self.station_c = None
self.z_c = None
self.stacked_traces = None
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Spectrogram')
self.add_parameter(
Param('Window length [s]:', 'twin', 100, 0.1, 10000.))
self.add_parameter(Param('Overlap [%]:', 'overlap', 75., 0., 99.))
self.add_parameter(Switch('Save figure', 'save', False))
self.add_parameter(
Choice('Taper function', 'taper_name', 'Hanning',
['Hanning', 'Hamming', 'Blackman', 'Bartlett']))
self.add_parameter(
Choice('Color scale', 'color_scale', 'log',
['log', 'sqrt', 'lin']))
self.add_parameter(
Choice('Color table', 'ctb_name', 'spectro',
['spectro', 'rainbow']))
self.add_trigger('Save plot data', self.save_data)
self.set_live_update(False)
self._tapers = {}
def setup(self):
self.set_name('FK (parstack)')
self.add_parameter(
Param('max slowness [s/km]', 'slowness_max', 0.2, 0., 1.))
self.add_parameter(
Param('min slowness [s/km]', 'slowness_min', 0.01, 0., 1.))
self.add_parameter(
Param('delta slowness [s/km]', 'slowness_delta', 0.002, 0., 0.2))
self.add_parameter(Param('delta backazimut', 'delta_bazi', 2, 1, 20))
self.add_parameter(
Param('Increment [s]', 'tinc', 60., 0.5, 60., high_is_none=True))
self.add_parameter(
Param('Smoothing length [N]', 'ntaper', 0, 0, 30,
low_is_none=True))
self.add_parameter(
Param('Maximum search factor', 'search_factor', 1, 0, 3))
self.add_parameter(
Choice('Use channels', 'want_channel', '*',
['*', '*Z', '*E', '*N', 'SHZ', 'BHZ', 'p0']))
self.add_parameter(
Choice('method', 'method', 'stack', ['stack', 'correlate']))
self.add_parameter(Switch('Show', 'want_all', True))
self.add_parameter(Switch('Phase weighted stack', 'want_pws', False))
self.set_live_update(False)
self.irun = 0
self.figs2draw = []
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Seismosizer')
self.add_parameter(
Param('Time', 'time', 0.0, -50., 50.))
# self.add_parameter(
# Param('Latitude', 'lat', 0.0, -90., 90.))
# self.add_parameter(
# Param('Longitude', 'lon', 0.0, -180., 180.))
self.add_parameter(
Param('North shift', 'north_km', 0.0, -50., 50.))
self.add_parameter(
Param('East shift', 'east_km', 0.0, -50., 50.))
self.add_parameter(
Param('Depth', 'depth_km', 10.0, 0.0, 600.0))
self.add_parameter(
Param('Magnitude', 'magnitude', 6.0, 0.0, 10.0))
self.add_parameter(
Param('Strike', 'strike', 0., -180., 180.))
self.add_parameter(
Param('Dip', 'dip', 90., 0., 90.))
self.add_parameter(
Param('Rake', 'rake', 0., -180., 180.))
self.add_parameter(
Param('Length', 'length', 0., 0., 1000*km))
self.add_parameter(
Param('Width', 'width', 0., 0., 500*km))
self.add_parameter(
Param('Nucleation X', 'nucleation_x', -1., -1., 1.))
self.add_parameter(
Param('Rupture velocity', 'velocity', 3500.0, 0.0, 5000.0))
self.add_parameter(
Param('STF duration', 'stf_duration', 0., 0., 20.))
self.add_parameter(
Choice('STF type', 'stf_type', self.stf_types[0], self.stf_types))
self.add_parameter(
Choice('GF Store', 'store_id',
'<not loaded yet>', ['<not loaded yet>']))
self.add_parameter(
Choice('Waveform type', 'waveform_type', 'Displacement [m]',
['Displacement [m]',
'Displacement [nm]',
'Velocity [m/s]',
'Velocity [nm/s]',
'Acceleration [m/s^2]',
'Acceleration [nm/s^2]']))
self.add_trigger('Set Engine', self.set_engine)
self.add_trigger('Set Params from Event', self.mechanism_from_event)
self.add_trigger('Add Stores', self.add_store)
self.store_ids = None
self.offline_config = None
self._engine = None
def setup(self):
self.hyposat_data_dir = pjoin(self._path, 'hyposat/data')
locreg_models = [
os.path.basename(x)
for x in glob.glob(pjoin(self.hyposat_data_dir, 'model_*.dat'))
]
crust_51_keys = [
'Off', 'For station corrections', 'For local/regional model',
'For station corrections, local/regional model and surface\
reflection corrections'
]
self.crust_51_choices = dict([(b, a)
for (a, b) in enumerate(crust_51_keys)])
self.set_name('HYPOSAT')
self.add_parameter(
Choice('Global Model', 'global_model', 'ak135',
('ak135', 'iasp91', 'iasp91a', 'prem', 'jb', 'sp6')))
self.add_parameter(
Choice('Local or Regional Model', 'locreg_model', '_',
('_', ) + tuple(locreg_models)))
self.add_parameter(
Choice('Use CRUST 5.1', 'crust_51', 'Off', crust_51_keys))
self.add_trigger('Save', self.save_last_run)
self.add_parameter(
Param('P std. deviation [s]', 'p_stddev', 0.1, 0.001, 9.9))
self.add_parameter(
Param('S std. deviation [s]', 's_stddev', 0.2, 0.001, 9.9))
self.add_parameter(
Param('P-wave velocity to correct elevation',
'vp_to_correct_elevation', 3.8, 0., 10.))
self.add_parameter(
Param('S-wave velocity to correct elevation',
'vs_to_correct_elevation', 2.1, 0., 10.))
self.add_parameter(
Param('Starting source depth [km]', 'starting_source_depth_km',
10., 0., 600.))
self.add_parameter(
Param('Zero level shift [km]', 'zero_level_km', 0., 0., 10.))
self.add_parameter(
Param('RG group velocity', 'rg_group_velocity', 2.6, 1., 10.))
self.add_parameter(
Switch('Show location plot', 'show_location_plot', False))
self.add_parameter(
Switch('Use active markers only', 'use_active', False))
self.set_live_update(False)
self.pdf_viewer = 'evince'
self.dir = None
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Drum Plot')
self.add_parameter(Param('Gain', 'yscale', 2., 0.1, 100.))
self.add_parameter(
Choice('Pre-scale', 'prescale', 'max', ['max', 'std']))
self.add_parameter(
Choice('N minutes', 'xminutes', '15', ['1', '15', '30', '60']))
# self.add_parameter(
# Choice(
# 'N hours', 'nhours', '24', ['24', '1'])
# )
self.add_parameter(Switch('Global common scale', 'scale_global', True))
self.set_live_update(False)
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Picker')
self.add_parameter(
Choice('Phase', 'phase', None,
[None, 'P', 'S', 'Pn', 'Pg', 'Sn', 'Sg']))
self.add_parameter(
Choice('Category', 'category', 'automatic',
['automatic', 'manual', 'revised', 'abandoned']))
self.add_parameter(
Choice('Polarity', 'polarity', None,
[None, 'positive', 'negative', 'undecidable']))
self.set_live_update(True)
def setup(self):
if self.config:
detector_default = self.config.detector_threshold
else:
detector_default = 100.
self.set_name('Lassie investigate')
self.add_parameter(Param('Tsearch', 'tsearch', 20., 0.01, 100))
self.add_parameter(
Param('Detector threshold', 'detector_threshold', detector_default,
1., 10000.))
self.add_parameter(Switch('Level Trace', 'level_trace', False))
self.add_parameter(
Switch('Hold comparison figure', 'hold_figure', False))
self.add_parameter(
Choice('new marker kind', 'marker_kind', kind_default, [
'1 (green)', '2 (blue)', '3 (orange)', '4 (purple)',
'5 (brown)', '0 (red)'
]))
self.add_trigger('load reference', self.load_comparison)
self.add_trigger('show comparison', self.show_comparison)
self.add_trigger('remove comparison', self.remove_comparison)
# self.add_trigger('read Lassie config', self.fail)
self.set_live_update(True)
self.markers_compare = []
self.detections = []
self.fig = None
self.fframe = None
self.grid = self.config.get_grid()
def setup(self):
self.set_name('Cake Phase')
# self._phase_names = ('PmP ~S ~P ~P(moho)s ~P(sill-top)s'
# ' ~P(sill-bottom)s Pdiff').split()
self._phase_names = ('~P Pg Sg pP p P Pdiff PKP PcP PcS PKIKP pPKIKP'
' SSP PPS SPP PSP SP PS ~PS ~SP Pn s S Sn PP PPP'
' ScS Sdiff SS SSS PcP SKS SKIKS').split()
for iphase, name in enumerate(self._phase_names):
self.add_parameter(
Switch(name, 'wantphase_%i' % iphase, iphase == 0))
self._models = cake.builtin_models()
self.model_choice = Choice('Model', 'chosen_model',
'ak135-f-continental.m', self._models)
self.add_parameter(self.model_choice)
self.add_parameter(Param('Global shift', 'tshift', 0., -20., 20.))
self.add_parameter(
Switch('Use station depth', 'use_station_depth', False))
self.add_trigger('Add Phase', self.add_phase_definition)
self.add_trigger('Add Model', self.add_model_to_choice)
self.add_trigger('Plot Model', self.plot_model)
self.add_trigger('Plot Rays', self.plot_rays)
self._phases = {}
self._model = None
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Particle Motion')
self.add_parameter(
Choice('Colormap', 'cmap', 'viridis',
['viridis', 'coolwarm', 'cool', 'bone', 'seismic']))
self.set_live_update(False)
def setup(self):
self.set_name("Station Book")
self.attributes = [
'network', 'station', 'location', 'lat', 'lon', 'elevation',
'depth', 'name'
]
self.add_parameter(
Choice('Sort by', 'sort_by', 'network', self.attributes))
def setup(self):
self.set_name('Cross correlation relocation')
self.add_parameter(
Param('Highpass [Hz]',
'corner_highpass',
1.0,
0.001,
50.,
low_is_none=True))
self.add_parameter(
Param('Lowpass [Hz]',
'corner_lowpass',
4.0,
0.001,
50.,
high_is_none=True))
self.add_parameter(
Param('Time window begin', 'tstart', -1.0, -100., 0.))
self.add_parameter(Param('Time window end', 'tend', 3.0, 0., 100.))
self.add_parameter(
Param('Minimum correlation', 'min_corr', 0.5, 0.0, 1.0))
self.add_parameter(
Param('Replace master depth [km]',
'master_depth_km',
None,
0.0,
100.,
high_is_none=True))
self.add_parameter(Switch('Save figure', 'save', False))
self.add_parameter(Switch('Fix depth', 'fix_depth', False))
self.add_parameter(
Switch('Show correlation traces', 'show_correlation_traces',
False))
self.add_parameter(
Choice('Weighting', 'weighting', 'cubic',
['equal', 'linear', 'quadratic']))
self.add_parameter(
Choice('Earth model', 'model_select', 'Global',
['Global (ak135)', 'Local (from crust2x2)']))
self.set_live_update(False)
self.model = None
self.model_key = None
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Download Waveforms')
self.add_parameter(Param(
'Min Radius [deg]', 'minradius', 0., 0., 180.))
self.add_parameter(Param(
'Max Radius [deg]', 'maxradius', 5., 0., 180.))
self.add_parameter(Param(
'Origin latitude [deg]', 'lat', 0, -90., 90.))
self.add_parameter(Param(
'Origin longitude [deg]', 'lon', 0., -180., 180.))
self.add_parameter(Switch(
'Use coordinates of selected event as origin', 'useevent', False))
self.add_parameter(Choice(
'Datecenter', 'datacenter', 'GEOFON', ['GEOFON', 'IRIS']))
self.add_parameter(Choice(
'Channels', 'channel_pattern', 'BH?',
['BH?', 'BHZ', 'HH?', '?H?', '*', '??Z']))
self.add_trigger('Save', self.save)
self.set_live_update(False)
self.current_stuff = None
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Time Line')
self.add_parameter(
Param('Latitude:', 'lat', 90, -90., 90., high_is_none=True))
self.add_parameter(
Param('Longitude:', 'lon', 180., -180, 180., high_is_none=True))
self.add_parameter(
Param('Maximum Distance [km]:', 'maxd', 20000., 0., 20000.,
high_is_none=True))
self.add_parameter(
Choice('Color by', 'color_by', 'time',
['time', 'longitude', 'latitude', 'magnitude', 'depth', 'kind']))
self.add_parameter(Choice('Colormap', 'cmap_selector',
'Red-Yellow-Blue', list(save_cmaps.keys())))
self.add_parameter(Choice('Coordinate system', 'coord_system',
'Lat/Lon', ['Lat/Lon', 'cartesian']))
self.add_parameter(Switch('Show stations', 'show_stations', False))
self.add_trigger('Save Figure', self.save_as)
self.set_live_update(False)
self.fig = None
self.cli_mode = False
def setup(self):
self.set_name('Export Waveforms')
self.add_parameter(
Choice('Format', 'format', 'mseed',
['mseed', 'text', 'sac', 'yaff']))
self.add_parameter(
Param('Time length limit for output files',
'tinc',
None,
0.1,
86400.,
low_is_none=True))
self.add_parameter(Switch('Save Station Meta', 'save_stations', False))
self.add_parameter(Switch('Apply Filters', 'apply_filter', False))
self.set_live_update(False)
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Catalog Statistics')
self.add_parameter(
Param('Latitude:', 'lat', 90, -90., 90., high_is_none=True))
self.add_parameter(
Param('Longitude:', 'lon', 180., -180, 180., high_is_none=True))
self.add_parameter(
Param('Maximum Distance [km]:', 'maxd', 20000., 0., 20000.,
high_is_none=True))
self.add_parameter(Choice('Event distribution', 'variation',
'daily', ['daily', 'annual']))
self.add_trigger('Save Figure', self.save_as)
self.set_live_update(False)
self.fig = None
self.cli_mode = False
def setup(self):
self.set_name("Plot Waveforms")
self.add_parameter(
Switch('Include Selected Markers', 'add_markers', False))
self.add_parameter(Switch('Fill positive', 'fill_between', False))
self.add_parameter(
Param('Reduction Velocity [km/s]',
't_red',
20.,
1.,
20.,
high_is_none=True))
self.add_parameter(Param('Amplitude Gain', 'yscale', 1., 0.1, 100.))
self.add_parameter(
Choice('Pre-scale Amplitudes', 'ampl_scaler', 'trace min/max',
['total min/max', 'trace min/max', 'standard deviation']))
self.add_trigger('Save Last Figure', self.save)
self.set_live_update(False)
self.fig = None
def setup(self):
self.set_name('CC Matrix')
self.add_parameter(Choice(
'Windowing method', 'time_window_choice', 'P-phase',
['P-phase', 'vmin/vmax']))
self.add_parameter(Param('low', 'low', 10., 0.1, 200.0,
high_is_none=True))
self.add_parameter(Param('high', 'high', 1, 0.1, 200.0,
low_is_none=True))
self.add_parameter(Param('padding [s]', 'tpad', 10, 0.1, 60.0))
self.add_parameter(Param('dt wanted', 'dt_wanted', 0.01, 0.01, 10.,
low_is_none=True))
self.add_parameter(Param('tdist [s]', 'tdist', 7.5,1., 20.))
self.add_parameter(Param('v min [m/s]', 'vmin', 1500., 500., 2000.))
self.add_parameter(Param('v max [m/s] ', 'vmax', 2000., 6000., 1000.))
self.add_parameter(Switch('Save Traces', 'save_traces', False))
self.add_parameter(Switch('Show Results', 'show_results', False))
self.add_trigger('Save Result', self.save)
self.set_live_update(False)
self.phase_cache = {}
def setup(self):
self.set_name('FK Analysis')
self.add_parameter(Param('Slowness range[+-]', 'smax', 0.2, 0., 1.))
self.add_parameter(
Param('Number of slowness divisions', 'divisor', 20, 10, 50))
self.add_parameter(
Param('Number of radial sections', 'numberOfFraction', 32, 4, 50))
self.add_parameter(
Param('Length of Sliding Window [s]', 'window_lenth', 1., 0.5,
10.))
self.add_parameter(
Param('Step fraction of Sliding Window [s]', 'win_frac', 0.05, 0.,
10.))
self.add_parameter(
Choice('If sampling rates differ', 'downresample', 'resample',
['resample', 'downsample', 'downsample to "target dt"']))
self.add_parameter(Param('target dt', 'target_dt', 0.2, 0., 10))
# self.add_parameter(Choice('Units: ','unit','[s/km]',('[s/km]','[s/deg]'))) # noqa
self.set_live_update(False)
def setup(self):
'''Customization of the snuffling.'''
self.set_name('Cross Correlation Search')
self.add_parameter(
Param('Downsample to [Hz]',
'downsample',
None,
0.1,
200.,
high_is_none=True))
self.add_parameter(Param('t search', 'tsearch', 1., 0.1, 100.))
self.add_parameter(
Switch('Apply to full dataset', 'apply_to_all', False))
self.add_parameter(
Choice('Normalization', 'normalization', 'Off',
('Off', 'Normal', 'Gliding')))
self.add_parameter(Param('Threshold', 'threshold', 0.5, 0., 1.))
self.add_parameter(Switch('Use FFT', 'use_fft', True))
self.set_live_update(False)
def setup(self):
self.set_name('Map')
self.add_parameter(Switch('Only active event', 'only_active', False))
self.add_parameter(
Switch('Open in external browser', 'open_external', False))
self.add_parameter(
Choice('Provider', 'map_kind', 'OpenStreetMap',
['OpenStreetMap', 'GMT', 'Google Maps']))
self.set_live_update(False)
self.figcount = 0
self.thread = qc.QThread()
self.marker_tempdir = self.tempdir()
self.file_serving_worker = FileServingWorker(self.marker_tempdir)
self.file_serving_worker.moveToThread(self.thread)
self.data_proxy = SignalProxy()
self.data_proxy.content_to_serve.connect(self.file_serving_worker.run)
self.thread.start()
self.port = 9998
self.viewer_connected = False