def set_soft_lock_off():
retValue = 0
try:
print "Set laser soft lock on"
iDevIdx,iModuleType,iSlotID = sepiaUser.initialiseSCMModule()
time.sleep(1.0)
sepiaUser.laser_soft_lock_off(iDevIdx, iSlotID)
time.sleep(1.0)
sepiaUser.close(iDevIdx)
except errorCode, Argument:
retValue = "Error: " + str(errorCode) + " " + str(Argument)
def main():
myHost = '' # initialise the server machine ('' means: local host)
myPort = 50009 # listen on a non-reserved port number
conn.sockobj = conn.socket(conn.AF_INET, conn.SOCK_STREAM) # make a TCP/IP socket object
conn.sockobj.settimeout(None) # No timeout on the socket
conn.sockobj.setsockopt(conn.SOL_SOCKET,conn.SO_REUSEADDR,1)
conn.sockobj.bind((myHost, myPort)) # bind the socket object to the specified server and port number
conn.sockobj.listen(5) # begin listening, and allow 5 pending connects
# Check for connection confimation from ORCA
print "Simple TCP/IP Run (Main) - Checking for connection confimation from ORCA ... "
while 1: # listen until process killed
connection, address = conn.sockobj.accept() # wait for next client connection
print 'Connection made to:' + str(address) # connection is a new socket
if address : break
connection.send(str(check_connection_flag)) # send signal to ORCA to check connection
controlFlag = '0'
controlArgument = '0'
master_mode_trigger_frequency = '0'
master_mode_number_of_pulses = '0'
# Get the control flag
connection.settimeout(5)
try:
while 1:
controlFlag = connection.recv(1024)
#print "ControlFlag = " + str(controlFlag)
break
except conn.timeout:
connection.send(timeout_flag)
main()
connection.send(str(check_connection_flag))
# Get the control argument
connection.settimeout(5)
try:
while 1:
controlArgument = connection.recv(1024)
break
except conn.timeout:
connection.send(timeout_flag)
main()
connection.send(str(check_connection_flag))
#connection.send(str(check_connection_flag)) #send this to signify that this is finished
#main()
#print "ControlFlag = " + str(controlFlag)
#controlFlag = 60
try:
#print 'controlFlag: ' + str(controlFlag)
#print 'laser intensity flag' + str(set_laser_intensity_flag)
# set the laser switch channel
if (int(controlFlag) == int(set_laser_switch_flag)):
print "Set the Laser switch to state" + str(controlArgument)
iDevIdx,iModuleType,iSlotID = sepiaUser.initialise()
rs.SetSelectedChannel(int(controlArgument))
sepiaUser.close(iDevIdx)
rs.Execute()
# set safe sates
elif (int(controlFlag) == int(set_safe_states_flag)):
print "Setting to safe states"
iDevIdx,iModuleType,iSlotID = sepiaUser.initialise()
set_safe_states(iDevIdx, iSlotID)
# set fibre switch channel
elif (int(controlFlag) == int(set_fibre_switch_channel_flag)):
print(controlArgument)
input_channel,output_channel = extractLaserFibreValues(controlArgument)
print "Set the Fibre Switch to input Channel:" + str(input_channel) +" and output channel:" + str(output_channel)
fs.SetIOChannels(int(input_channel), int(output_channel))
# fs.SetFSChannel(controlArgument)
# set laser intensity
elif (int(controlFlag) == int(set_laser_intensity_flag)):
print "Set Laser Intensity to " + str(controlArgument) + "%"
iDevIdx,iModuleType,iSlotID = sepiaUser.initialise()
time.sleep(1.0)
sepiaUser.set_laser_intensity(int(controlArgument), iDevIdx)
time.sleep(1.0)
sepiaUser.close(iDevIdx)
# set soft lock on
elif (int(controlFlag) == int(set_laser_soft_lock_on_flag)):
print "Set laser soft lock on"
iDevIdx,iModuleType,iSlotID = sepiaUser.initialiseSCMModule()
time.sleep(1.0)
sepiaUser.laser_soft_lock_on(iDevIdx, iSlotID)
time.sleep(1.0)
sepiaUser.close(iDevIdx)
# start master mode run
elif (int(controlFlag) == int(master_mode_flag)):
master_mode_trigger_frequency,master_mode_number_of_pulses = extractMasterModeFromCode(controlArgument)
print "Starting a Master mode sub run with trig frequency: " + str(master_mode_trigger_frequency) + "Hz and num_of_pulses:" + str(master_mode_number_of_pulses)
#iDevIdx,iModuleType,iSlotID = sepiaUser.initialise()
#time.sleep(1.0)
#iDevIdx2,iModuleType2,iSlotID2 = sepiaUser.initialiseSCMModule()
#sepiaUser.laser_soft_lock_off(iDevIdx, iSlotID2)
#time.sleep(1.0)
digi_trig = ni.GenerateDigitalTrigger(int(master_mode_trigger_frequency), int(master_mode_number_of_pulses))
digi_trig.start()
digi_trig.stop()
#sepiaUser.laser_soft_lock_on(iDevIdx, iSlotID2)
#time.sleep(1.0)
#sepiaUser.close(iDevIdx)
#sepiaUser.close(iDevIdx2)
# set soft lock off
elif (int(controlFlag) == int(set_laser_soft_lock_off_flag)):
print "Set laser soft lock off"
iDevIdx,iModuleType,iSlotID = sepiaUser.initialiseSCMModule()
time.sleep(1.0)
print sepiaUser.laser_soft_lock_off(iDevIdx, iSlotID)
time.sleep(1.0)
sepiaUser.close(iDevIdx)
# set the laser frequency to high enough to see visually
elif (int(controlFlag) == int(set_laser_testing_frequency_mode)):
print "Setting laser to 20MHz testing Mode"
iDevIdx,iModuleType,iSlotID = sepiaUser.initialise()
sepiaUser.set_laser_frequency(2, iDevIdx) # set the laser frequency to 20Mhz
sepiaUser.close(iDevIdx)
else:
print "No command value recieved"
# put all the possible options in here
except:
connection.send(timeout_flag)
main()
connection.send(str(check_connection_flag)) #send this to signify that this is finished
print "Return to listening on the port"
main() # return to listening on the port
import pysepiaUser as sepiaUser import time iDevIdx,iModuleType,iSlotID = sepiaUser.initialiseSCMModule() #print iDevIdx #print sepiaUser.laser_soft_lock_off(iDevIdx, iSlotID) #sepiaUser.close(iDevIdx) time.sleep(1) #iDevIdx,iModuleType,iSlotID = sepiaUser.initialise() #print sepiaUser.get_laser_lock_status(iDevIdx, iSlotID) sepiaUser.close(iDevIdx)
