def _query_operational_data(
request_template_filename, security_server_address,
timestamp_before_requests, timestamp_after_requests, expected_message_ids,
is_client=True):
# Start with the initial timestamp we obtained before sending the regular requests.
next_records_from = timestamp_before_requests
found_message_ids = set()
while next_records_from is not None:
# Send one request per second. This means we should get all the records by
# the end of this loop for sure even with
# records-available-timestamp-offset-seconds set to several seconds.
time.sleep(1)
print("\nUsing recordsFrom with the value ", next_records_from)
message_id = common.generate_message_id()
request_contents = common.format_query_operational_data_request_template(
request_template_filename, message_id,
next_records_from, timestamp_after_requests)
print("Generated the following operational data request: \n")
print(request_contents)
response = common.post_xml_request(
security_server_address, request_contents, get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if not mime_parts:
common.parse_and_check_soap_response(raw_response)
raise Exception("Expected a multipart response, received a plain SOAP response")
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(
soap_part, record_count, is_client=is_client)
json_payload = common.get_multipart_json_payload(mime_parts[1])
records = json_payload.get("records")
for record in records:
rec_message_id = record.get("messageId")
found_message_ids.add(rec_message_id)
if rec_message_id and rec_message_id in expected_message_ids:
# One of the messages has been found, remove it from the list of expected
# ID-s. Note that some of the records received match the operational data
# requests we are sending so we might not find matching ID-s in each
# response.
print("Found operational data matching message ID", rec_message_id)
expected_message_ids.remove(rec_message_id)
if not expected_message_ids:
# We have received all the data we expected.
print("Received all the expected records")
break
next_records_from = _get_next_records_from(soap_part)
if expected_message_ids:
raise Exception(
"Operational data about some of the requests sent, was not received " \
"(remaining message ID-s: %s)" % (", ".join(expected_message_ids)))
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
query_data_client_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_ss_owner_template.xml")
query_data_producer_template_filename = os.path.join(
request_template_dir,
"query_operational_data_producer_ss_owner_template.xml")
### Metadata and operational data requests and the relevant checks
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
print(
"\n---- Sending a verificationconf request to the client's security server ----\n"
)
response = common.make_get_request(client_security_server_address +
"/verificationconf")
common.check_status(response)
print("Received the following status code and response headers: \n")
common.print_response_status_and_headers(response)
print(
"\n---- Sending a listClients request to the client's security server ----\n"
)
response = common.make_get_request(client_security_server_address +
"/listClients")
common.check_status(response)
print("Received the following response: \n")
common.print_response_status_and_headers(response)
common.wait_for_operational_data()
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make an operational data request to the client's security server and check the
# response payload.
# We expect that neither of the requests sent above have been stored in the
# operational monitoring database.
print(
"\n---- Sending an operational data request to the client's security server ----\n"
)
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
common.check_record_count(record_count, 0)
else:
common.parse_and_check_soap_response(raw_response)
# Wait a second to ensure that the previous operational data request is not included
# in the operational data that we request below.
time.sleep(1)
print(
"\n---- Sending a wsdl request to the client's security server ----\n")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_before_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
response = common.make_get_request(
client_security_server_address + "/wsdl?xRoadInstance=" \
"XTEE-CI-XM&memberClass=GOV&memberCode=00000000&subsystemCode=" \
"Center&serviceCode=xroadGetRandom&version=v1")
common.check_status(response)
print("Received the following response: \n")
common.print_response_status_and_headers(response)
common.wait_for_operational_data()
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make operational data requests to both security servers and check the
# response payloads. We expect that the wsdl request has been stored in the
# operational monitoring database.
print(
"\n---- Sending an operational data request to the client's security server ----\n"
)
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_wsdl_query_rec(
client_security_server_address, "Client"))
# Check if the timestamps in the response are in the expected range.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request to the producer's " \
"security server ----\n")
message_id = common.generate_message_id()
print("\nGenerated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_producer_template_filename, message_id,
producer_timestamp_before_requests, producer_timestamp_after_requests)
print("Generated the following query data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part,
record_count,
is_client=False)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_wsdl_query_rec(
producer_security_server_address, "Producer"))
# Check timestamp values
common.assert_expected_timestamp_values(
json_payload, producer_timestamp_before_requests,
producer_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
xroad_request_template_filename = os.path.join(
request_template_dir, "simple_xroad_query_template.xml")
listmethods_query_template_filename = os.path.join(
request_template_dir, "listmethods_client_query_template.xml")
soap_fault_query_template_filename = os.path.join(
request_template_dir, "soap_fault_query_template.xml")
query_data_client_template_filename = os.path.join(
request_template_dir, "query_health_data_client_template.xml")
query_data_producer_template_filename = os.path.join(
request_template_dir, "query_health_data_producer_template.xml")
query_data_invalid_client_template_filename = os.path.join(
request_template_dir, "query_health_data_invalid_client_template.xml")
query_data_unknown_client_template_filename = os.path.join(
request_template_dir, "query_health_data_unknown_client_template.xml")
query_data_without_client_template_filename = os.path.join(
request_template_dir, "query_health_data_without_client.xml")
producer_health_data_request = None
client_health_data_request = None
producer_initial_timestamp = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
producer_opmonitor_restart_timestamp = common.get_opmonitor_restart_timestamp(
producer_security_server_address, ssh_user)
client_opmonitor_restart_timestamp = common.get_opmonitor_restart_timestamp(
client_security_server_address, ssh_user)
### First, send a regular X-Road request.
xroad_message_id = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request" %
(xroad_message_id, ))
print(
"\n---- Sending an X-Road request to the client's security server ----\n"
)
request_contents = common.format_xroad_request_template(
xroad_request_template_filename, xroad_message_id)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("Received the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
common.wait_for_operational_data()
### Make a health check request to the producer.
print("\n---- Sending a health data request to the producer's " \
"security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for health data request" % (message_id, ))
request_contents = common.format_query_health_data_request_template(
query_data_producer_template_filename, message_id)
producer_health_data_request = request_contents
print("Generated the following health data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents)
xml = common.parse_and_clean_xml(response.text)
print("Received the following health data response:\n")
print(xml.toprettyxml())
common.check_soap_fault(xml)
_assert_monitoring_daemon_start_timestamp_in_range(
response, producer_opmonitor_restart_timestamp)
_assert_stats_period(response, STATISTICS_PERIOD_SECONDS)
print("Looking for the xroadGetRandom service in the response")
event_data = _find_health_data_events_for_service(response,
GET_RANDOM_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about xroadGetRandom was not found in the response")
_assert_last_successful_event_timestamp_in_range(
event_data, producer_initial_timestamp)
_assert_successful_events_count(event_data, 1)
_assert_unsuccessful_events_count(event_data, 0)
_assert_xml_tags_present(event_data,
SAMPLE_PRODUCER_GET_RANDOM_STATS.keys())
_assert_xml_tags_match_values(event_data, PREDICTABLE_FIELDS,
SAMPLE_PRODUCER_GET_RANDOM_STATS)
### Send a listMethods request to the client.
listmethods_message_id = common.generate_message_id()
print(
"\nGenerated message ID %s for the listMethods request to the client" %
(listmethods_message_id, ))
print(
"\n---- Sending a listMethods request to the client's security server ----\n"
)
request_contents = common.format_xroad_request_template(
listmethods_query_template_filename, listmethods_message_id)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part = common.get_multipart_soap(mime_parts[0])
common.print_multipart_soap(soap_part)
else:
common.parse_and_check_soap_response(raw_response)
common.wait_for_operational_data()
### Send a health data request to the client.
client_pre_health_data_timestamp = common.get_remote_timestamp(
client_security_server_address, ssh_user)
message_id = common.generate_message_id()
print("Generated message ID %s for health data request" % (message_id, ))
print("\n---- Sending a health data request to the client's " \
"security server ----\n")
request_contents = common.format_query_health_data_request_template(
query_data_client_template_filename, message_id)
client_health_data_request = request_contents
print("Generated the following health data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
xml = common.parse_and_clean_xml(response.text)
print("Received the following health data response:\n")
print(xml.toprettyxml())
common.check_soap_fault(xml)
_assert_monitoring_daemon_start_timestamp_in_range(
response, client_opmonitor_restart_timestamp)
_assert_stats_period(response, STATISTICS_PERIOD_SECONDS)
print("Looking for the listMethods service in the response")
event_data = _find_health_data_events_for_service(response,
LISTMETHODS_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about listMethods was not found in the response")
_assert_last_successful_event_timestamp_in_range(
event_data, client_pre_health_data_timestamp)
_assert_successful_events_count(event_data, 1)
_assert_unsuccessful_events_count(event_data, 0)
_assert_xml_tags_present(event_data,
SAMPLE_CLIENT_LISTMETHODS_STATS.keys())
_assert_xml_tags_match_values(event_data, PREDICTABLE_FIELDS,
SAMPLE_CLIENT_LISTMETHODS_STATS)
### Send a health data request to the client, using an invalid client ID in the
### query criteria.
message_id = common.generate_message_id()
print("Generated message ID %s for health data request" % (message_id, ))
print("\n---- Sending a health data request to the client's " \
"security server, using an invalid client in the filter criteria ----\n")
request_contents = common.format_query_health_data_request_template(
query_data_invalid_client_template_filename, message_id)
print("Generated the following health data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
xml = common.parse_and_clean_xml(response.text)
print("Received the following health data response:\n")
print(xml.toprettyxml())
# Using an invalid client ID must result in a SOAP fault.
common.assert_soap_fault(xml)
### Send an unfiltered health data request to the client, using the producer
### as the service provider.
message_id = common.generate_message_id()
print("Generated message ID %s for health data request" % (message_id, ))
print("\n---- Sending an unfiltered health data request to the client's " \
"security server, using the producer as the service provider ----\n")
request_contents = common.format_query_health_data_request_template(
query_data_without_client_template_filename, message_id)
print("Generated the following health data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
xml = common.parse_and_clean_xml(response.text)
print("Received the following health data response:\n")
print(xml.toprettyxml())
# This response must contain several serviceEvents elements (for all the
# requests that were made to the producer above, including the initial health
# data request).
_assert_service_events_min_count(response, 2)
event_data = _find_health_data_events_for_service(response,
GET_RANDOM_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about xroadGetRandom was not found in the response")
event_data = _find_health_data_events_for_service(
response, GET_HEALTH_DATA_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about getSecurityServerHealthData was not found in the response"
)
### Send a request using an unknown client ID in the filter. Expect an empty response
### is returned.
message_id = common.generate_message_id()
print("Generated message ID %s for health data request" % (message_id, ))
print("\n---- Sending a health data request with an unknown client ID to the client's " \
"security server ----\n")
request_contents = common.format_query_health_data_request_template(
query_data_unknown_client_template_filename, message_id)
print("Generated the following health data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
xml = common.parse_and_clean_xml(response.text)
print("Received the following health data response:\n")
print(xml.toprettyxml())
common.check_soap_fault(xml)
_assert_no_events(response)
### Sleep and expect that the health data will be reset.
print("Waiting for the health metrics to be reset\n")
time.sleep(STATISTICS_PERIOD_SECONDS)
### Repeat the health data requests and check if the health data has been reset.
print("Repeating the health data request to the producer\n")
response = common.post_xml_request(producer_security_server_address,
producer_health_data_request)
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
_assert_monitoring_daemon_start_timestamp_in_range(
response, producer_opmonitor_restart_timestamp)
_assert_stats_period(response, STATISTICS_PERIOD_SECONDS)
event_data = _find_health_data_events_for_service(response,
GET_RANDOM_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about xroadGetRandom was not found in the response")
_assert_successful_events_count(event_data, 0)
_assert_unsuccessful_events_count(event_data, 0)
_assert_xml_tags_missing(event_data, STATISTICS_FIELDS)
print("Repeating the health data request to the client\n")
response = common.post_xml_request(client_security_server_address,
client_health_data_request)
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
_assert_monitoring_daemon_start_timestamp_in_range(
response, client_opmonitor_restart_timestamp)
_assert_stats_period(response, STATISTICS_PERIOD_SECONDS)
event_data = _find_health_data_events_for_service(response,
LISTMETHODS_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about listMethods was not found in the response")
_assert_successful_events_count(event_data, 0)
_assert_unsuccessful_events_count(event_data, 0)
_assert_xml_tags_missing(event_data, STATISTICS_FIELDS)
### Now make an unusuccessful request and check the relevant health data.
producer_pre_unsuccessful_timestamp = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
message_id = common.generate_message_id()
print(
"\nGenerated message ID %s for an X-Road request that will cause a SOAP fault"
% (message_id, ))
print("\n---- Sending an X-Road request that will cause a SOAP fault at the " \
"service provider, to the client's security server ----\n")
request_contents = common.format_xroad_request_template(
soap_fault_query_template_filename, message_id)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.assert_soap_fault(xml)
common.wait_for_operational_data()
# Send a health check request to the producer.
print("\n---- Sending a health data request to the producer's " \
"security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for health data request" % (message_id, ))
request_contents = common.format_query_health_data_request_template(
query_data_producer_template_filename, message_id)
print("Generated the following health data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents)
xml = common.parse_and_clean_xml(response.text)
print("Received the following health data response:\n")
print(xml.toprettyxml())
common.check_soap_fault(xml)
# The service is xRoadGetRandom but the result was a fault.
print("Looking for the xroadGetRandom service in the response")
event_data = _find_health_data_events_for_service(response,
GET_RANDOM_SERVICE_XML)
if event_data is None:
raise Exception(
"Health data about xroadGetRandom was not found in the response")
_assert_successful_events_count(event_data, 0)
_assert_unsuccessful_events_count(event_data, 1)
_assert_last_unsuccessful_event_timestamp_in_range(
event_data, producer_pre_unsuccessful_timestamp)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
unknown_member_query_template_filename = os.path.join(
request_template_dir, "unknown_member_query_template.xml")
unknown_service_query_template_filename = os.path.join(
request_template_dir, "unknown_service_query_template.xml")
soap_fault_query_template_filename = os.path.join(
request_template_dir, "soap_fault_query_template.xml")
query_data_client_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_ss_owner_template.xml")
query_data_producer_template_filename = os.path.join(
request_template_dir,
"query_operational_data_producer_ss_owner_template.xml")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_before_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
message_id_serverproxy = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request to unknown service" %
(message_id_serverproxy, ))
### Regular and operational data requests and the relevant checks
print("\n---- Sending an X-Road request to an unknown service to the client's " \
"security server ----\n")
request_contents = common.format_xroad_request_template(
unknown_service_query_template_filename, message_id_serverproxy)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.assert_soap_fault(xml)
message_id_clientproxy = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request from unknown member" %
(message_id_clientproxy, ))
print("\n---- Sending an X-Road request from an unknown member to the " \
"client's security server ----\n")
request_contents = common.format_xroad_request_template(
unknown_member_query_template_filename, message_id_clientproxy)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.assert_soap_fault(xml)
message_id_service = common.generate_message_id()
print(
"\nGenerated message ID %s for X-Road request that will cause a SOAP fault"
% (message_id_service, ))
print("\n---- Sending an X-Road request that will cause a SOAP fault to the " \
"client's security server ----\n")
request_contents = common.format_xroad_request_template(
soap_fault_query_template_filename, message_id_service)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.assert_soap_fault(xml)
common.wait_for_operational_data()
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make operational data requests to both security servers and check the
# response payloads.
print(
"\n---- Sending an operational data request to the client's security server ----\n"
)
message_id = common.generate_message_id()
message_id_client = message_id
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the X-Road request that caused a fault in server proxy
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_unknown_service_query_rec(
message_id_serverproxy, client_security_server_address,
"Client"))
# The record describing the X-Road request that caused a fault in client proxy
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_unknown_member_query_rec(
message_id_clientproxy, client_security_server_address,
"Client"))
# The record describing the X-Road request that caused a fault in test service
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_soap_fault_query_rec(
message_id_service, client_security_server_address, "Client"))
# Check if the timestamps in the response are in the expected range.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request to the producer's " \
"security server ----\n")
message_id = common.generate_message_id()
message_id_producer = message_id
print("\nGenerated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_producer_template_filename, message_id,
producer_timestamp_before_requests, producer_timestamp_after_requests)
print("Generated the following query data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part,
record_count,
is_client=False)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the X-Road request that caused a fault in server proxy
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_unknown_service_query_rec(
message_id_serverproxy, producer_security_server_address,
"Producer"))
# The record describing the X-Road request that caused a fault in test service
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_soap_fault_query_rec(
message_id_service, producer_security_server_address,
"Producer"))
# Check timestamp values
common.assert_expected_timestamp_values(
json_payload, producer_timestamp_before_requests,
producer_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
xroad_request_template_filename = os.path.join(
request_template_dir, "simple_xroad_query_template.xml")
query_operational_data_producer_ss1_client_template_filename = os.path.join(
request_template_dir,
"query_operational_data_producer_ss1_client_template.xml")
query_operational_data_client_ss0_owner_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_ss0_owner_template.xml")
query_operational_data_client_ss_owner_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_ss_owner_template.xml")
query_operational_data_client_central_monitoring_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_central_monitoring_template.xml")
query_operational_data_client_ss_owner_filtered_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_ss_owner_filtered_template.xml")
query_operational_data_client_central_monitoring_filtered_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_central_monitoring_filtered_template.xml"
)
query_data_client_template_filename = os.path.join(
request_template_dir, "query_operational_data_client_template.xml")
query_data_client_filtered_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_filtered_template.xml")
query_operational_data_client_ss0_owner_filtered_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_ss0_owner_filtered_template.xml")
query_data_client_invalid_filter_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_invalid_filter_template.xml")
query_data_client_unknown_member_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_unknown_member_template.xml")
query_data_client_unknown_subsystem_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_unknown_subsystem_template.xml")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_before_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
xroad_message_id = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request" %
(xroad_message_id, ))
### Regular and operational data requests and the relevant checks
print(
"\n---- Sending an X-Road request to the client's security server ----\n"
)
request_contents = common.format_xroad_request_template(
xroad_request_template_filename, xroad_message_id)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("Received the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
# Send an operational data request from SS1 client to the producer's
# security server
message_id = common.generate_message_id()
message_id_producer = message_id
print("\n---- Sending an operational data request from SS1 client" \
" to the producer's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_operational_data_producer_ss1_client_template_filename,
message_id, 1, 2)
print("Generated the following operational data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
else:
common.parse_and_check_soap_response(raw_response)
# Send an operational data request from SS0 owner to the client's
# security server
message_id = common.generate_message_id()
message_id_client = message_id
print("\n---- Sending an operational data request from the SS0 owner" \
" to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_ss0_owner_template_filename, message_id,
1, 2)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
else:
common.parse_and_check_soap_response(raw_response)
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make operational data requests to client's security server as
# security server owner, central monitoring client and regular client and
# check the response payloads.
print("\n---- Sending an operational data request from the security server " \
"owner to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_ss_owner_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Security server owner is expected to receive all three query records.
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the X-Road request at the client proxy side in the
# client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_simple_query_rec(
xroad_message_id, client_security_server_address, "Client"))
# The record describing the query data request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_query_data_client_proxy_rec(
message_id_producer, client_security_server_address, "Client"))
# The record describing the query data request at the server proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_query_data_server_proxy_rec(
message_id_client, client_security_server_address, "Producer"))
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from the central " \
"monitoring client to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_central_monitoring_template_filename,
message_id, client_timestamp_before_requests,
client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Central monitoring client is expected to receive all three query
# records.
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the X-Road request at the client proxy side
# in the client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_simple_query_rec(
xroad_message_id, client_security_server_address, "Client"))
# The record describing the query data request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_query_data_client_proxy_rec(
message_id_producer, client_security_server_address, "Client"))
# The record describing the query data request at the server proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_query_data_server_proxy_rec(
message_id_client, client_security_server_address, "Producer"))
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from the security server " \
"owner with the member 'GOV:00000000' in search criteria " \
"to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_ss_owner_filtered_template_filename,
message_id, client_timestamp_before_requests,
client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# With the member 'GOV:00000000' in search criteria,
# security server owner is expected to receive only the query
# record where the member 'GOV:00000000' is the service provider.
common.check_record_count(record_count, 1)
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the query data request at the client proxy side in the
# client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_query_data_client_proxy_rec(
message_id_producer, client_security_server_address, "Client"))
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from the central monitoring " \
"client with the subsystem 'GOV:00000000:Center' in search " \
"criteria to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_central_monitoring_filtered_template_filename,
message_id, client_timestamp_before_requests,
client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# With the subsystem 'GOV:00000000:Center' in search criteria,
# central monitoring client is expected to receive only the query
# record where the subsystem 'GOV:00000000:Center' is
# the service provider.
common.check_record_count(record_count, 1)
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the X-Road request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
_expected_keys_and_values_of_simple_query_rec(
xroad_message_id, client_security_server_address, "Client"))
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from regular client " \
"'GOV:00000001:System1' to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Regular client 'GOV:00000001:System1' is expected to receive the two
# query records where the subsystem 'GOV:00000001:System1' is the client.
common.check_record_count(record_count, 2)
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Remove the field 'securityServerInternalIp' from expected keys
# and values lists
expected_keys_and_valuesof_simple_query_rec = _expected_keys_and_values_of_simple_query_rec(
xroad_message_id, client_security_server_address, "Client")
expected_keys_and_values_of_query_data_client_proxy_rec = _expected_keys_and_values_of_query_data_client_proxy_rec(
message_id_producer, client_security_server_address, "Client")
list_of_expected_keys_and_values = [
expected_keys_and_valuesof_simple_query_rec,
expected_keys_and_values_of_query_data_client_proxy_rec
]
common.remove_key_from_list("securityServerInternalIp",
list_of_expected_keys_and_values)
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the X-Road request at the client proxy side in the
# client's security server
common.assert_present_in_json(
json_payload, expected_keys_and_valuesof_simple_query_rec)
# The record describing the query data request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
expected_keys_and_values_of_query_data_client_proxy_rec)
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from regular client " \
"'GOV:00000000' to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_ss0_owner_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Regular client 'GOV:00000000' is expected to receive two records: the
# query record where the member 'GOV:00000000' is the client and the
# query record where the member 'GOV:00000000' is the service provider.
common.check_record_count(record_count, 2)
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Remove the field 'securityServerInternalIp' from expected keys
# and values list
expected_keys_and_values_of_query_data_server_proxy_rec = _expected_keys_and_values_of_query_data_server_proxy_rec(
message_id_client, client_security_server_address, "Producer")
common.remove_key_from_list(
"securityServerInternalIp",
[expected_keys_and_values_of_query_data_server_proxy_rec])
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the query data request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
expected_keys_and_values_of_query_data_client_proxy_rec)
# The record describing the query data request at the server proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
expected_keys_and_values_of_query_data_server_proxy_rec)
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from regular client " \
"'GOV:00000001:System1' with the member 'GOV:00000000' in " \
"search criteria to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_filtered_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# With the member 'GOV:00000000' in search criteria,
# regular client 'GOV:00000001:System1' is expected to receive one
# query record where the subsystem 'GOV:00000001:System1' is the client
# and the member 'GOV:00000000' is the service provider.
common.check_record_count(record_count, 1)
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the query data request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
expected_keys_and_values_of_query_data_client_proxy_rec)
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request from regular client " \
"'GOV:0000000' with the member 'GOV:00000000' in " \
"search criteria to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_operational_data_client_ss0_owner_filtered_template_filename,
message_id, client_timestamp_before_requests,
client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# With the member 'GOV:00000000' in search criteria,
# regular client 'GOV:00000000' is expected to receive one
# query record where the member 'GOV:00000000' is the service provider.
common.check_record_count(record_count, 1)
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the query data request at the client proxy
# side in the client's security server
common.assert_present_in_json(
json_payload,
expected_keys_and_values_of_query_data_client_proxy_rec)
# Check timestamp values.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests,
client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request with invalid client" \
" in search criteria to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_invalid_filter_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Invalid client in search criteria of the operational monitoring request
# must result in a SOAP fault
common.assert_soap_fault(xml)
print("\n---- Sending an operational data request with an unknown member " \
"in search criteria to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_unknown_member_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
# Unknown member in search criteria must result in an empty response
common.check_record_count(record_count, 0)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request with an unknown " \
"subsystem in search criteria to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_unknown_subsystem_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
# Unknown subsystem in search criteria must result in an empty response
common.check_record_count(record_count, 0)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
xroad_request_template_filename = os.path.join(
request_template_dir, "simple_xroad_query_template.xml")
query_data_client_template_filename = os.path.join(
request_template_dir, "query_operational_data_client_template.xml")
query_data_producer_template_filename = os.path.join(
request_template_dir, "query_operational_data_producer_template.xml")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_before_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
xroad_message_id = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request" % (xroad_message_id, ))
# The headers will be extracted after the request template has been
# formatted.
xroad_request_headers = None
### Regular and operational data requests and the relevant checks
print("\n---- Sending an X-Road request to the client's security server ----\n")
request_contents = common.format_xroad_request_template(
xroad_request_template_filename, xroad_message_id)
print("Generated the following X-Road request: \n")
print(request_contents)
request_xml = common.parse_and_clean_xml(request_contents)
xroad_request_headers = request_xml.getElementsByTagName(
"SOAP-ENV:Header")[0].toprettyxml()
response = common.post_xml_request(
client_security_server_address, request_contents)
print("Received the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
common.wait_for_operational_data()
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make operational data requests to both security servers and check the
# response payloads.
print("\n---- Sending an operational data request to the client's security server ----\n")
message_id = common.generate_message_id()
message_id_client = message_id
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print("Generated the following query data request for the client's security server: \n")
print(request_contents)
response = common.post_xml_request(
client_security_server_address, request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_simple_query_rec(
xroad_message_id, "Client"))
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check if the timestamps in the response are in the expected range.
common.assert_expected_timestamp_values(
json_payload,
client_timestamp_before_requests, client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload, xroad_message_id)
else:
common.parse_and_check_soap_response(raw_response)
print("\nThe headers of the original request were: \n")
print(xroad_request_headers)
print("\n---- Sending an operational data request to the producer's " \
"security server ----\n")
message_id = common.generate_message_id()
message_id_producer = message_id
print("\nGenerated message ID %s for operational data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_producer_template_filename, message_id,
producer_timestamp_before_requests, producer_timestamp_after_requests)
print("Generated the following operational data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(
producer_security_server_address, request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count, is_client=False)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_simple_query_rec(
xroad_message_id, "Producer"))
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check timestamp values
common.assert_expected_timestamp_values(
json_payload,
producer_timestamp_before_requests, producer_timestamp_after_requests)
common.print_multipart_query_data_response(
json_payload, xroad_message_id)
else:
common.parse_and_check_soap_response(raw_response)
print("\nThe headers of the original request were: \n")
print(xroad_request_headers)
# Repeat both query_data requests after a second, to ensure the initial attempts
# were also stored in the operational_data table.
time.sleep(1)
print("\n---- Repeating the query_data request to the client's security server ----\n")
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
message_id = common.generate_message_id()
print("\nGenerated message ID %s for operational data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(
client_security_server_address, request_contents, get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of the required fields in the JSON structures.
# The record describing the original X-Road request
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_simple_query_rec(
xroad_message_id, "Client"))
# The record describing the query data request at the client proxy side in the
# client's security server
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_query_data_client_rec(
message_id_client, "Client"))
# The record describing the query data request at the server proxy side in the
# client's security server
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_query_data_client_rec(
message_id_client, "Producer"))
# Check if the value of "responseSoapSize" is in the expected range.
common.assert_response_soap_size_in_range(
json_payload, message_id_client, 1837, 2)
# Check if the value of "responseMimeSize" is in the expected range.
common.assert_response_mime_size_in_range(
json_payload, message_id_client, 2274, 2)
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check timestamp values
common.assert_expected_timestamp_values(
json_payload,
client_timestamp_before_requests, client_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n----- Repeating the query_data request to the producer's security server ----\n")
message_id = common.generate_message_id()
print("\nGenerated message ID %s for operational data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_producer_template_filename, message_id,
producer_timestamp_before_requests, producer_timestamp_after_requests)
print("Generated the following operational data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(
producer_security_server_address, request_contents, get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count, is_client=False)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of the required fields in the JSON structures.
# The record describing the original X-Road request
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_simple_query_rec(
xroad_message_id, "Producer"))
# The record describing the query data request at the client proxy side in the
# producer's security server
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_query_data_producer_rec(
message_id_producer, "Client"))
# The record describing the query data request at the server proxy side in the
# producer's security server
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_query_data_producer_rec(
message_id_producer, "Producer"))
# Check if the value of "responseSoapSize" is in the expected range.
common.assert_response_soap_size_in_range(
json_payload, message_id_producer, 1872, 2)
# Check if the value of "responseMimeSize" is in the expected range.
common.assert_response_mime_size_in_range(
json_payload, message_id_producer, 2311, 2)
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check timestamp values
common.assert_expected_timestamp_values(
json_payload,
producer_timestamp_before_requests, producer_timestamp_after_requests)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
xroad_request_template_filename = os.path.join(
request_template_dir, "simple_xroad_query_template.xml")
xroad_request_attachments_template_filename = os.path.join(
request_template_dir, "xroad_query_for_attachments_template.xml")
query_data_client_template_filename = os.path.join(
request_template_dir, "query_operational_data_client_template.xml")
query_data_producer_template_filename = os.path.join(
request_template_dir, "query_operational_data_producer_template.xml")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_before_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
message_id_one_attachment = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request with one " \
"attachment" % (message_id_one_attachment, ))
### Regular and operational data requests and the relevant checks
print("\n---- Sending an X-Road request with one attachment to the " \
"service that will respond with three attachments ----\n")
request_contents = common.format_xroad_request_template(
xroad_request_attachments_template_filename, message_id_one_attachment)
response = common.post_multipart_request(
client_security_server_address, request_contents,
attachment_count=1, get_raw_stream=True)
# Expecting a multipart response with attachments.
mime_parts, raw_response = common.parse_multipart_response(response)
print("Received the following X-Road response: \n")
print(raw_response.decode("utf-8"))
if not mime_parts:
common.parse_and_check_soap_response(raw_response)
message_id_five_attachments = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request with five " \
"attachments" % (message_id_five_attachments, ))
print("\n---- Sending an X-Road request with five attachments to the " \
"client's security server ----\n")
request_contents = common.format_xroad_request_template(
xroad_request_template_filename, message_id_five_attachments)
# Expecting a simple SOAP response.
response = common.post_multipart_request(
client_security_server_address, request_contents, attachment_count=5)
print("Received the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
common.wait_for_operational_data()
client_timestamp_after_request = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_request = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make operational data requests to both security servers and check the
# response payloads.
print("\n---- Sending an operational data request to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_request)
print("Generated the following query data request for the client's security server: \n")
print(request_contents)
response = common.post_xml_request(
client_security_server_address, request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the query with one attachment
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_one_attachment_query_rec(
message_id_one_attachment, "Client"))
# The record describing the query with five attachments
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_five_attachments_query_rec(
message_id_five_attachments, "Client"))
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check if the timestamps in the response are in the expected range.
common.assert_expected_timestamp_values(
json_payload, client_timestamp_before_requests, client_timestamp_after_request)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
print("\n---- Sending an operational data request to the producer's " \
"security server ----\n")
message_id = common.generate_message_id()
print("\nGenerated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_producer_template_filename, message_id,
producer_timestamp_before_requests, producer_timestamp_after_request)
print("Generated the following query data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(
producer_security_server_address, request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count, is_client=False)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of all the required fields in at least one JSON structure.
# The record describing the query with one attachment
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_one_attachment_query_rec(
message_id_one_attachment, "Producer"))
# The record describing the query with five attachments
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_five_attachments_query_rec(
message_id_five_attachments, "Producer"))
# As operational data is queried by regular client, the field
# 'securityServerInternalIp' is not expected to be included
# in the response payload.
common.assert_missing_in_json(json_payload, "securityServerInternalIp")
# Check if the timestamps in the response are in the expected range.
common.assert_expected_timestamp_values(
json_payload,
producer_timestamp_before_requests, producer_timestamp_after_request)
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
xroad_request_template_filename = os.path.join(
request_template_dir, "simple_xroad_query_template.xml")
query_data_client_template_filename = os.path.join(
request_template_dir, "query_operational_data_client_template.xml")
query_data_producer_template_filename = os.path.join(
request_template_dir, "query_operational_data_producer_template.xml")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_before_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
xroad_message_id = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request" %
(xroad_message_id, ))
### Regular and operational data requests and the relevant checks
print(
"\n---- Sending an X-Road request to the client's security server ----\n"
)
request_contents = common.format_xroad_request_template(
xroad_request_template_filename, xroad_message_id)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("Received the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
common.wait_for_operational_data()
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
producer_timestamp_after_requests = common.get_remote_timestamp(
producer_security_server_address, ssh_user)
# Now make operational data requests to both security servers and check the
# response payloads.
print(
"\n---- Sending an operational data request to the client's security server ----\n"
)
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print(
"Generated the following query data request for the client's security server: \n"
)
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
# op-monitor-buffer.size=0 must result in an empty response
common.check_record_count(record_count, 0)
else:
common.parse_and_check_soap_response(raw_response)
message_id = common.generate_message_id()
print("\nGenerated message ID %s for operational data request" %
(message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_producer_template_filename, message_id,
producer_timestamp_before_requests, producer_timestamp_after_requests)
print("Generated the following operational data request for the producer's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(producer_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part,
record_count,
is_client=False)
# op-monitor-buffer.size=0 must result in an empty response
common.check_record_count(record_count, 0)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
query_data_client_template_filename = os.path.join(
request_template_dir, "query_operational_data_client_template.xml")
query_data_client_missing_recordsfrom_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_missing_recordsfrom_template.xml")
query_data_client_missing_recordsto_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_missing_recordsto_template.xml")
query_data_client_empty_search_criteria_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_empty_search_criteria_template.xml")
query_data_client_missing_search_criteria_template_filename = os.path.join(
request_template_dir,
"query_operational_data_client_missing_search_criteria_template.xml")
### Operational data requests and the relevant checks
message_id = common.generate_message_id()
print("\n---- Sending an operational data request where 'recordsTo' is " \
"earlier than 'recordsFrom' to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id, 1479823179,
1479823175)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Earlier recordsTo than recordsFrom in operational monitoring request must
# result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request where " \
"'recordsFrom' is in the future to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id, 2479823179,
2479823185)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# recordsFrom >= (now - records-available-timestamp-offset-seconds) in operational
# monitoring request must result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request without " \
"'recordsFrom' element to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_missing_recordsfrom_template_filename, message_id,
None, 1479823185)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Missing recordsFrom element in operational monitoring request must
# result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request without " \
"'recordsTo' element to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_missing_recordsto_template_filename, message_id,
1479823185, None)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Missing recordsTo element in operational monitoring request must
# result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request without 'recordsFrom'" \
" and 'recordsTo' elements to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_empty_search_criteria_template_filename, message_id,
None, None)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Missing recordsFrom and recordsTo elements in operational monitoring
# request must result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request without 'searchCriteria'" \
" element to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_missing_search_criteria_template_filename,
message_id, None, None)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Missing searchCriteria element in operational monitoring
# request must result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request with non-numeric 'recordsFrom'" \
" value to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id, "abc", 1479823185)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Non-numeric recordsFrom value in operational monitoring request must
# result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request with too large 'recordsTo'" \
" value to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id, 1479823185,
888888888888888888888)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Too large recordsTo value in operational monitoring request must
# result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
print("\n---- Sending an operational data request with negative 'recordsFrom'" \
" and 'recordsTo' values to the client's security server ----\n")
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id, -1479823185,
-1479823183)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
# Negative recordsFrom and recordsTo values in operational monitoring
# request must result in a SOAP fault
common.assert_soap_fault(xml)
message_id = common.generate_message_id()
timestamp_before_request = common.get_remote_timestamp(
client_security_server_address, ssh_user)
print("\n---- Sending an operational data request where " \
"'recordsTo' is in the future to the client's security server ----\n")
# Let's craft a request where recordsFrom is in the past
# and recordsTo is in the future
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
timestamp_before_request - 5, timestamp_before_request + 10)
print("Generated the following operational data request for the client's " \
"security server: \n")
print(request_contents)
response = common.post_xml_request(client_security_server_address,
request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(
mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
# In case 'recordsTo' value is in the future, the element
# 'nextRecordsFrom' is expected in operational
# monitoring response. 'nextRecordsFrom' value is expected to be
# (now - records-available-timestamp-offset-seconds).
# records-available-timestamp-offset-seconds value is expected to be set to 0
# before the test in run_tests.py.
common.assert_get_next_records_from_in_range(soap_part,
timestamp_before_request)
else:
common.parse_and_check_soap_response(raw_response)
def run(client_security_server_address, producer_security_server_address,
ssh_user, request_template_dir):
xroad_query_to_ss0_service_template_filename = os.path.join(
request_template_dir, "xroad_query_to_ss0_service_template.xml")
xroad_query_to_ss2_service_template_filename = os.path.join(
request_template_dir, "xroad_query_to_ss2_service_template.xml")
query_data_client_template_filename = os.path.join(
request_template_dir, "query_operational_data_client_template.xml")
client_timestamp_before_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
message_id_ss0 = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request" % (message_id_ss0, ))
### Regular and operational data requests and the relevant checks
print("\n---- Sending an X-Road request to the service provider in " \
"security server 00000000_1 ----\n")
request_contents = common.format_xroad_request_template(
xroad_query_to_ss0_service_template_filename, message_id_ss0)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(
client_security_server_address, request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
message_id_ss2 = common.generate_message_id()
print("\nGenerated message ID %s for X-Road request" % (message_id_ss2, ))
print("\n---- Sending an X-Road request to the service provider in " \
"security server 00000002_1 ----\n")
request_contents = common.format_xroad_request_template(
xroad_query_to_ss2_service_template_filename, message_id_ss2)
print("Generated the following X-Road request: \n")
print(request_contents)
response = common.post_xml_request(
client_security_server_address, request_contents)
print("\nReceived the following X-Road response: \n")
xml = common.parse_and_clean_xml(response.text)
print(xml.toprettyxml())
common.check_soap_fault(xml)
common.wait_for_operational_data()
client_timestamp_after_requests = common.get_remote_timestamp(
client_security_server_address, ssh_user)
# Now make an operational data request to the client's security server
# and check the response payload.
print("\n---- Sending an operational data request to the client's security server ----\n")
message_id = common.generate_message_id()
print("Generated message ID %s for query data request" % (message_id, ))
request_contents = common.format_query_operational_data_request_template(
query_data_client_template_filename, message_id,
client_timestamp_before_requests, client_timestamp_after_requests)
print("Generated the following query data request for the client's security server: \n")
print(request_contents)
response = common.post_xml_request(
client_security_server_address, request_contents,
get_raw_stream=True)
mime_parts, raw_response = common.parse_multipart_response(response)
if mime_parts:
soap_part, record_count = common.get_multipart_soap_and_record_count(mime_parts[0])
common.print_multipart_soap_and_record_count(soap_part, record_count)
json_payload = common.get_multipart_json_payload(mime_parts[1])
# Check the presence of the required fields in at least one JSON structure.
# The record describing the X-Road request to service provider in
# security server 00000000_1
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_cluster_query_rec(
message_id_ss0, "xtee8.ci.kit"))
# The record describing the X-Road request to service provider in
# security server 00000002_1
common.assert_present_in_json(
json_payload, _expected_keys_and_values_of_cluster_query_rec(
message_id_ss2, "xtee10.ci.kit"))
common.print_multipart_query_data_response(json_payload)
else:
common.parse_and_check_soap_response(raw_response)