def test_then_construction(self):
loop = Loop(self.p1[1:6:1])
task1 = Task(self.p1.set, 2)
task2 = Wait(0.02)
loop2 = loop.then(task1)
loop3 = loop2.then(task2, task1)
loop4 = loop3.then(task2, overwrite=True)
loop5 = loop4.each(self.p1, BreakIf(lambda: self.p1.get() >= 3))
loop6 = loop5.then(task1)
loop7 = loop6.then(task1, overwrite=True)
# original loop is untouched, same as .each and .loop
self.assertEqual(loop.then_actions, ())
# but loop2 has the task we asked for
self.assertEqual(loop2.then_actions, (task1, ))
# loop3 gets the other tasks appended
self.assertEqual(loop3.then_actions, (task1, task2, task1))
# loop4 gets only the new one
self.assertEqual(loop4.then_actions, (task2, ))
# tasks survive .each
self.assertEqual(loop5.then_actions, (task2, ))
# and ActiveLoop.then works the same way as Loop.then
self.assertEqual(loop6.then_actions, (task2, task1))
self.assertEqual(loop7.then_actions, (task1, ))
# .then rejects Loops and others that are valid loop actions
for action in (loop2, loop7, BreakIf(lambda: self.p1() >= 3), self.p1,
True, 42):
with self.assertRaises(TypeError):
loop.then(action)
def test_breakif(self):
nan = float('nan')
loop = Loop(self.p1[1:6:1])
data = loop.each(self.p1, BreakIf(self.p1 >= 3)).run_temp()
self.assertEqual(repr(data.p1.tolist()), repr([1., 2., 3., nan, nan]))
data = loop.each(BreakIf(self.p1.get_latest >= 3), self.p1).run_temp()
self.assertEqual(repr(data.p1.tolist()), repr([1., 2., nan, nan, nan]))
with self.assertRaises(TypeError):
BreakIf(True)
with self.assertRaises(TypeError):
BreakIf(self.p1.set)
def test_basic(self):
p1 = AbortingGetter('p1', count=2, vals=Numbers(-10, 10), set_cmd=None)
sv = p1[1:3:1]
loop = Loop(sv)
# not sure why you'd do it, but you *can* snapshot a Loop
expected = {
'__class__': 'qcodes.loops.Loop',
'sweep_values': sv.snapshot(),
'delay': 0,
'then_actions': []
}
self.assertEqual(loop.snapshot(), expected)
loop = loop.then(Task(p1.set, 0), Wait(0.123))
expected['then_actions'] = [{
'type': 'Task',
'func': repr(p1.set)
}, {
'type': 'Wait',
'delay': 0.123
}]
# then test snapshot on an ActiveLoop
breaker = BreakIf(lambda: p1.get_latest() > 3)
self.assertEqual(breaker.snapshot()['type'], 'BreakIf')
loop = loop.each(p1, breaker)
expected['__class__'] = 'qcodes.loops.ActiveLoop'
expected['actions'] = [p1.snapshot(), breaker.snapshot()]
self.assertEqual(loop.snapshot(), expected)
def test_basic(self):
p1 = AbortingGetter('p1', count=2, vals=Numbers(-10, 10))
sv = p1[1:3:1]
loop = Loop(sv)
# not sure why you'd do it, but you *can* snapshot a Loop
expected = {
'__class__': 'qcodes.loops.Loop',
'sweep_values': sv.snapshot(),
'delay': 0,
'then_actions': []
}
self.assertEqual(loop.snapshot(), expected)
loop = loop.then(Task(p1.set, 0), Wait(0.123))
expected['then_actions'] = [{
'type': 'Task',
'func': repr(p1.set)
}, {
'type': 'Wait',
'delay': 0.123
}]
# then test snapshot on an ActiveLoop
breaker = BreakIf(p1.get_latest > 3)
self.assertEqual(breaker.snapshot()['type'], 'BreakIf')
# TODO: once we have reprs for DeferredOperations, test that
# the right thing shows up in breaker.snapshot()['condition']
loop = loop.each(p1, breaker)
expected['__class__'] = 'qcodes.loops.ActiveLoop'
expected['actions'] = [p1.snapshot(), breaker.snapshot()]
self.assertEqual(loop.snapshot(), expected)
def test_then_action(self):
self.maxDiff = None
nan = float('nan')
self.p1.set(5)
f_calls, g_calls = [], []
def f():
f_calls.append(1)
def g():
g_calls.append(1)
breaker = BreakIf(lambda: self.p1() >= 3)
ts1 = datetime.now().strftime('%Y-%m-%d %H:%M:%S')
# evaluate param snapshots now since later value will change
p1snap = self.p1.snapshot()
self.p2.set(2)
p2snap = self.p2.snapshot()
self.p3.set(3)
p3snap = self.p3.snapshot()
data = Loop(self.p1[1:6:1]).each(self.p1,
breaker).then(Task(self.p1.set, 2),
Wait(0.01),
Task(f)).run_temp()
ts2 = datetime.now().strftime('%Y-%m-%d %H:%M:%S')
self.assertEqual(repr(data.p1.tolist()), repr([1., 2., 3., nan, nan]))
self.assertEqual(self.p1.get(), 2)
self.assertEqual(len(f_calls), 1)
# this loop makes use of all the features, so use it to test
# DataSet metadata
loopmeta = data.metadata['loop']
default_meas_meta = data.metadata['station']['default_measurement']
# assuming the whole loop takes < 1 sec, all timestamps
# should each be the same as one of the bounding times
self.check_snap_ts(loopmeta, 'ts_start', (ts1, ts2))
self.check_snap_ts(loopmeta, 'ts_end', (ts1, ts2))
self.check_snap_ts(loopmeta['sweep_values']['parameter'], 'ts',
(ts1, ts2))
self.check_snap_ts(loopmeta['actions'][0], 'ts', (ts1, ts2))
self.check_snap_ts(default_meas_meta[0], 'ts', (ts1, ts2, None))
self.check_snap_ts(default_meas_meta[1], 'ts', (ts1, ts2, None))
del p1snap['ts'], p2snap['ts'], p3snap['ts']
self.assertEqual(
data.metadata, {
'station': {
'instruments': {},
'parameters': {},
'components': {},
'default_measurement': [p2snap, p3snap]
},
'loop': {
'use_threads':
False,
'__class__':
'qcodes.loops.ActiveLoop',
'sweep_values': {
'parameter':
p1snap,
'values': [{
'first': 1,
'last': 5,
'num': 5,
'type': 'linear'
}]
},
'delay':
0,
'actions': [p1snap, breaker.snapshot()],
'then_actions': [{
'type': 'Task',
'func': repr(self.p1.set)
}, {
'type': 'Wait',
'delay': 0.01
}, {
'type': 'Task',
'func': repr(f)
}]
}
})
# now test a nested loop with .then inside and outside
f_calls[:] = []
Loop(self.p1[1:3:1]).each(
Loop(self.p2[1:3:1]).each(self.p2).then(Task(g))).then(
Task(f)).run_temp()
self.assertEqual(len(f_calls), 1)
self.assertEqual(len(g_calls), 2)
# Loop.loop nesting always just makes the .then actions run after
# the outer loop
f_calls[:] = []
Loop(self.p1[1:3:1]).then(Task(f)).loop(self.p2[1:3:1]).each(
self.p1).run_temp()
self.assertEqual(len(f_calls), 1)
f_calls[:] = []
Loop(self.p1[1:3:1]).loop(self.p2[1:3:1]).then(Task(f)).each(
self.p1).run_temp()
self.assertEqual(len(f_calls), 1)
f_calls[:] = []
Loop(self.p1[1:3:1]).loop(self.p2[1:3:1]).each(self.p1).then(
Task(f)).run_temp()
self.assertEqual(len(f_calls), 1)