def testSignal(self):
w = QgsProjectionSelectionWidget()
w.show()
spy = QSignalSpy(w.crsChanged)
w.setCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
self.assertEqual(w.crs().authid(), 'EPSG:3111')
self.assertEqual(len(spy), 1)
# setting the same crs doesn't emit the signal
w.setCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
self.assertEqual(len(spy), 1)
def testShowingNotSetOption(self):
""" test showing the not set option """
w = QgsProjectionSelectionWidget()
# start with an invalid CRS
w.setCrs(QgsCoordinateReferenceSystem())
# add the not-set option
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
# current crs (which would show "invalid") should be hidden
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# hide not-set option
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
# and now current crs option ('invalid') should be reshown
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# repeat with a slightly different workflow
w = QgsProjectionSelectionWidget()
# start with an invalid CRS
w.setCrs(QgsCoordinateReferenceSystem())
# add the not-set option
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
# current crs (which would show "invalid") should be hidden
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# now set a current crs
w.setCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
# both current and not set options should be shown
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
def testShowingHiding(self):
""" test showing and hiding options """
w = QgsProjectionSelectionWidget()
# layer crs
w.setOptionVisible(QgsProjectionSelectionWidget.LayerCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.LayerCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.LayerCrs, True)
# should still be hidden, because layer crs not set
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.LayerCrs))
w.setLayerCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.LayerCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.LayerCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.LayerCrs))
# project crs
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, True)
# should still be hidden, because project crs was not set
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
QgsProject.instance().setCrs(QgsCoordinateReferenceSystem('EPSG:3113'))
w = QgsProjectionSelectionWidget()
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
# default crs
w.setOptionVisible(QgsProjectionSelectionWidget.DefaultCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.DefaultCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.DefaultCrs, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.DefaultCrs))
# current crs
w = QgsProjectionSelectionWidget()
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
w = QgsProjectionSelectionWidget()
w.setCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# not set
w = QgsProjectionSelectionWidget()
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, True)
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, False)
self.assertFalse(w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
class ModelerParameterDefinitionDialog(QDialog):
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(settings.value("/Processing/modelParametersDefinitionDialogGeometry", QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.tr('Default field name, or ; separated list of field names for multiple field parameters'))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType in (
parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE) or
isinstance(self.param, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'), QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'), QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'), QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'), QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'), QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'), QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(self.tr('Vector (No Geometry Required)'), QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'), QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'), QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'), QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'), QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'), QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_NUMBER or self.paramType == parameters.PARAMETER_DISTANCE or
isinstance(self.param, (QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType() == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == parameters.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.behavior() == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == parameters.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
elif self.paramType == parameters.PARAMETER_ENUM or \
isinstance(self.param, QgsProcessingParameterEnum):
self.widget = EnumModelerWidget(self)
if self.param is not None:
self.widget.setAllowMultiple(bool(self.param.allowMultiple()))
self.widget.setOptions(self.param.options())
self.widget.setDefault(self.param.defaultValue())
self.verticalLayout.addWidget(self.widget)
elif self.paramType == parameters.PARAMETER_MATRIX or \
isinstance(self.param, QgsProcessingParameterMatrix):
self.widget = MatrixModelerWidget(self)
if self.param is not None:
self.widget.setValue(self.param.defaultValue())
self.widget.setHeaders(self.param.headers())
self.widget.setFixedRows(self.param.hasFixedNumberRows())
self.verticalLayout.addWidget(self.widget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = self.nameTextBox.text()
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == parameters.PARAMETER_BOOLEAN or
isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description, self.state.isChecked())
elif (self.paramType == parameters.PARAMETER_TABLE_FIELD or
isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(name, description, defaultValue=default,
parentLayerParameterName=parent, type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == parameters.PARAMETER_BAND or
isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None, parent)
elif (self.paramType == parameters.PARAMETER_MAP_LAYER or
isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(
name, description)
elif (self.paramType == parameters.PARAMETER_RASTER or
isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(
name, description)
elif (self.paramType == parameters.PARAMETER_TABLE or
isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_VECTOR or
isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description,
self.datatypeCombo.currentData())
elif (self.paramType == parameters.PARAMETER_NUMBER or
isinstance(self.param, (QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
try:
self.param = QgsProcessingParameterNumber(name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == parameters.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(name, description,
str(self.defaultEdit.expression()),
parent)
elif (self.paramType == parameters.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_EXTENT or
isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == parameters.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(name, description,
QgsProcessingParameterFile.Folder if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType == parameters.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(name, description, self.selector.crs().authid())
elif (self.paramType == parameters.PARAMETER_ENUM or
isinstance(self.param, QgsProcessingParameterEnum)):
self.param = QgsProcessingParameterEnum(name, description, self.widget.options(), self.widget.allowMultiple(), self.widget.defaultOptions())
elif (self.paramType == parameters.PARAMETER_MATRIX or
isinstance(self.param, QgsProcessingParameterMatrix)):
self.param = QgsProcessingParameterMatrix(name, description, hasFixedNumberRows=self.widget.fixedRows(), headers=self.widget.headers(), defaultValue=self.widget.value())
else:
if self.paramType:
typeId = self.paramType
else:
typeId = self.param.type()
paramTypeDef = QgsApplication.instance().processingRegistry().parameterType(typeId)
if not paramTypeDef:
msg = self.tr('The parameter `{}` is not registered, are you missing a required plugin?'.format(typeId))
raise UndefinedParameterException(msg)
self.param = paramTypeDef.create(name)
self.param.setDescription(description)
self.param.setMetadata(paramTypeDef.metadata())
if not self.requiredCheck.isChecked():
self.param.setFlags(self.param.flags() | QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.reject(self)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.tr('Default field name, or ; separated list of field names for multiple field parameters'))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType in (
parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE) or
isinstance(self.param, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'), QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'), QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'), QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'), QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'), QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'), QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(self.tr('Vector (No Geometry Required)'), QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'), QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'), QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'), QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'), QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'), QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_NUMBER or self.paramType == parameters.PARAMETER_DISTANCE or
isinstance(self.param, (QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType() == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == parameters.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.behavior() == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == parameters.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
elif self.paramType == parameters.PARAMETER_ENUM or \
isinstance(self.param, QgsProcessingParameterEnum):
self.widget = EnumModelerWidget(self)
if self.param is not None:
self.widget.setAllowMultiple(bool(self.param.allowMultiple()))
self.widget.setOptions(self.param.options())
self.widget.setDefault(self.param.defaultValue())
self.verticalLayout.addWidget(self.widget)
elif self.paramType == parameters.PARAMETER_MATRIX or \
isinstance(self.param, QgsProcessingParameterMatrix):
self.widget = MatrixModelerWidget(self)
if self.param is not None:
self.widget.setValue(self.param.defaultValue())
self.widget.setHeaders(self.param.headers())
self.widget.setFixedRows(self.param.hasFixedNumberRows())
self.verticalLayout.addWidget(self.widget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def setupUi(self, PreferencesWizard):
PreferencesWizard.setObjectName(_fromUtf8("PreferencesWizard"))
PreferencesWizard.resize(771, 443)
PreferencesWizard.setOptions(QtGui.QWizard.CancelButtonOnLeft
| QtGui.QWizard.NoBackButtonOnStartPage
| QtGui.QWizard.NoDefaultButton)
self.welcomePage = QtGui.QWizardPage()
self.welcomePage.setObjectName(_fromUtf8("welcomePage"))
self.gridLayout = QtGui.QGridLayout(self.welcomePage)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.label = QtGui.QLabel(self.welcomePage)
self.label.setText(_fromUtf8(""))
self.label.setObjectName(_fromUtf8("label"))
self.gridLayout.addWidget(self.label, 0, 0, 1, 1)
PreferencesWizard.addPage(self.welcomePage)
self.preferencesPage = PreferencesWizardPage()
self.preferencesPage.setObjectName(_fromUtf8("preferencesPage"))
self.gridLayout_2 = QtGui.QGridLayout(self.preferencesPage)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.preferencesWidget = PreferencesWidget(self.preferencesPage)
self.preferencesWidget.setObjectName(_fromUtf8("preferencesWidget"))
self.gridLayout_2.addWidget(self.preferencesWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.preferencesPage)
self.serverPage = ServerWizardPage()
self.serverPage.setObjectName(_fromUtf8("serverPage"))
self.serverLayout = QtGui.QGridLayout(self.serverPage)
self.serverLayout.setObjectName(_fromUtf8("serverLayout"))
self.serverWidget = ServerWidget(self.serverPage)
self.serverWidget.setObjectName(_fromUtf8("serverWidget"))
self.serverLayout.addWidget(self.serverWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.serverPage)
self.globalPage = GlobalPreferencesPage()
self.globalPage.setObjectName(_fromUtf8("globalPage"))
self.gridLayout_3 = QtGui.QGridLayout(self.globalPage)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.crsWidget = QgsProjectionSelectionWidget(self.globalPage)
self.crsWidget.setObjectName(_fromUtf8("crsWidget"))
self.gridLayout_3.addWidget(self.crsWidget, 0, 1, 1, 2)
self.fontCombo = QtGui.QFontComboBox(self.globalPage)
self.fontCombo.setObjectName(_fromUtf8("fontCombo"))
self.gridLayout_3.addWidget(self.fontCombo, 3, 1, 1, 2)
self.snappingUnitCombo = QtGui.QComboBox(self.globalPage)
self.snappingUnitCombo.setObjectName(_fromUtf8("snappingUnitCombo"))
self.gridLayout_3.addWidget(self.snappingUnitCombo, 4, 2, 1, 1)
self.snappingToleranceSpin = QtGui.QDoubleSpinBox(self.globalPage)
self.snappingToleranceSpin.setObjectName(
_fromUtf8("snappingToleranceSpin"))
self.gridLayout_3.addWidget(self.snappingToleranceSpin, 4, 1, 1, 1)
self.crsAuthidLabel = QtGui.QLabel(self.globalPage)
self.crsAuthidLabel.setObjectName(_fromUtf8("crsAuthidLabel"))
self.gridLayout_3.addWidget(self.crsAuthidLabel, 0, 0, 1, 1)
self.forceCrsCheck = QtGui.QCheckBox(self.globalPage)
self.forceCrsCheck.setText(_fromUtf8(""))
self.forceCrsCheck.setChecked(True)
self.forceCrsCheck.setObjectName(_fromUtf8("forceCrsCheck"))
self.gridLayout_3.addWidget(self.forceCrsCheck, 1, 1, 1, 2)
self.fontLabel = QtGui.QLabel(self.globalPage)
self.fontLabel.setObjectName(_fromUtf8("fontLabel"))
self.gridLayout_3.addWidget(self.fontLabel, 3, 0, 1, 1)
self.snappingLabel = QtGui.QLabel(self.globalPage)
self.snappingLabel.setObjectName(_fromUtf8("snappingLabel"))
self.gridLayout_3.addWidget(self.snappingLabel, 4, 0, 1, 1)
self.forceOtfCheck = QtGui.QCheckBox(self.globalPage)
self.forceOtfCheck.setText(_fromUtf8(""))
self.forceOtfCheck.setChecked(True)
self.forceOtfCheck.setObjectName(_fromUtf8("forceOtfCheck"))
self.gridLayout_3.addWidget(self.forceOtfCheck, 2, 1, 1, 2)
self.forceOtfLabel = QtGui.QLabel(self.globalPage)
self.forceOtfLabel.setObjectName(_fromUtf8("forceOtfLabel"))
self.gridLayout_3.addWidget(self.forceOtfLabel, 2, 0, 1, 1)
self.forceCrsLabel = QtGui.QLabel(self.globalPage)
self.forceCrsLabel.setObjectName(_fromUtf8("forceCrsLabel"))
self.gridLayout_3.addWidget(self.forceCrsLabel, 1, 0, 1, 1)
PreferencesWizard.addPage(self.globalPage)
self.retranslateUi(PreferencesWizard)
QtCore.QMetaObject.connectSlotsByName(PreferencesWizard)
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster Layer'
PARAMETER_TABLE = 'Vector Layer'
PARAMETER_VECTOR = 'Vector Features'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Vector Field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple Input'
PARAMETER_BAND = 'Raster Band'
PARAMETER_MAP_LAYER = 'Map Layer'
paramTypes = [
PARAMETER_BOOLEAN,
PARAMETER_EXTENT,
PARAMETER_FILE,
PARAMETER_NUMBER,
PARAMETER_RASTER,
PARAMETER_STRING,
PARAMETER_EXPRESSION,
PARAMETER_MAP_LAYER,
PARAMETER_TABLE,
PARAMETER_TABLE_FIELD,
PARAMETER_VECTOR,
PARAMETER_POINT,
PARAMETER_CRS,
PARAMETER_MULTIPLE,
PARAMETER_BAND
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(settings.value("/Processing/modelParametersDefinitionDialogGeometry", QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.tr('Default field name, or ; separated list of field names for multiple field parameters'))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType in (
ModelerParameterDefinitionDialog.PARAMETER_VECTOR, ModelerParameterDefinitionDialog.PARAMETER_TABLE) or
isinstance(self.param, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'), QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'), QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'), QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'), QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'), QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'), QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(self.tr('Vector (No Geometry Required)'), QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'), QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'), QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'), QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'), QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'), QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, QgsProcessingParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType() == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.behavior() == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or
isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description, self.state.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or
isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(name, description, defaultValue=default,
parentLayerParameterName=parent, type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND or
isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None, parent)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MAP_LAYER or
isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_RASTER or
isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE or
isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description,
self.datatypeCombo.currentData())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, QgsProcessingParameterNumber)):
try:
self.param = QgsProcessingParameterNumber(name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(name, description,
str(self.defaultEdit.expression()),
parent)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXTENT or
isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(name, description,
QgsProcessingParameterFile.Folder if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(name, description, self.selector.crs().authid())
if not self.requiredCheck.isChecked():
self.param.setFlags(self.param.flags() | QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.reject(self)
@staticmethod
def inputTooltip(input_type):
tooltips = {
ModelerParameterDefinitionDialog.PARAMETER_NUMBER: QCoreApplication.translate('Processing', 'A numeric parameter, including float or integer values.'),
ModelerParameterDefinitionDialog.PARAMETER_RASTER: QCoreApplication.translate('Processing', 'A raster layer parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_TABLE: QCoreApplication.translate('Processing', 'A vector layer parameter, e.g. for algorithms which change layer styles, edit layers in place, or other operations which affect an entire layer.'),
ModelerParameterDefinitionDialog.PARAMETER_VECTOR: QCoreApplication.translate('Processing', 'A vector feature parameter, e.g. for algorithms which operate on the features within a layer.'),
ModelerParameterDefinitionDialog.PARAMETER_STRING: QCoreApplication.translate('Processing', 'A freeform string parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION: QCoreApplication.translate('Processing', 'A QGIS expression parameter, which presents an expression builder widget to users.'),
ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN: QCoreApplication.translate('Processing', 'A boolean parameter, for true/false values.'),
ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD: QCoreApplication.translate('Processing', 'A vector field parameter, for selecting an existing field from a vector source.'),
ModelerParameterDefinitionDialog.PARAMETER_EXTENT: QCoreApplication.translate('Processing', 'A map extent parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_FILE: QCoreApplication.translate('Processing', 'A file parameter, for use with non-map layer file sources.'),
ModelerParameterDefinitionDialog.PARAMETER_POINT: QCoreApplication.translate('Processing', 'A geographic point parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_CRS: QCoreApplication.translate('Processing', 'A coordinate reference system (CRS) input parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE: QCoreApplication.translate('Processing', 'An input allowing selection of multiple sources, including multiple map layers or file sources.'),
ModelerParameterDefinitionDialog.PARAMETER_BAND: QCoreApplication.translate('Processing', 'A raster band parameter, for selecting an existing band from a raster source.'),
ModelerParameterDefinitionDialog.PARAMETER_MAP_LAYER: QCoreApplication.translate('Processing', 'A generic map layer parameter, which accepts either vector or raster layers.')
}
return tooltips[input_type]
# coding: utf-8
from PyQt4.QtCore import Qt
from qgis.core import QgsCoordinateReferenceSystem
from qgis.gui import QgsUserInputDockWidget, QgsProjectionSelectionWidget
from qgis.utils import iface
projection_selection_widget = QgsProjectionSelectionWidget()
projection_selection_widget.resize(400, 30)
projection_selection_widget.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
user_input_dock_widget = QgsUserInputDockWidget()
user_input_dock_widget.addUserInputWidget(projection_selection_widget)
iface.addDockWidget(Qt.RightDockWidgetArea, user_input_dock_widget)
# iface.removeDockWidget(user_input_dock_widget)
class Ui_PreferencesWizard(object):
def setupUi(self, PreferencesWizard):
PreferencesWizard.setObjectName(_fromUtf8("PreferencesWizard"))
PreferencesWizard.resize(771, 443)
PreferencesWizard.setOptions(QtGui.QWizard.CancelButtonOnLeft|QtGui.QWizard.NoBackButtonOnStartPage|QtGui.QWizard.NoDefaultButton)
self.welcomePage = QtGui.QWizardPage()
self.welcomePage.setObjectName(_fromUtf8("welcomePage"))
self.gridLayout = QtGui.QGridLayout(self.welcomePage)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.label = QtGui.QLabel(self.welcomePage)
self.label.setText(_fromUtf8(""))
self.label.setObjectName(_fromUtf8("label"))
self.gridLayout.addWidget(self.label, 0, 0, 1, 1)
PreferencesWizard.addPage(self.welcomePage)
self.preferencesPage = PreferencesWizardPage()
self.preferencesPage.setObjectName(_fromUtf8("preferencesPage"))
self.gridLayout_2 = QtGui.QGridLayout(self.preferencesPage)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.preferencesWidget = PreferencesWidget(self.preferencesPage)
self.preferencesWidget.setObjectName(_fromUtf8("preferencesWidget"))
self.gridLayout_2.addWidget(self.preferencesWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.preferencesPage)
self.serverPage = ServerWizardPage()
self.serverPage.setObjectName(_fromUtf8("serverPage"))
self.serverLayout = QtGui.QGridLayout(self.serverPage)
self.serverLayout.setObjectName(_fromUtf8("serverLayout"))
self.serverWidget = ServerWidget(self.serverPage)
self.serverWidget.setObjectName(_fromUtf8("serverWidget"))
self.serverLayout.addWidget(self.serverWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.serverPage)
self.globalPage = GlobalPreferencesPage()
self.globalPage.setObjectName(_fromUtf8("globalPage"))
self.gridLayout_3 = QtGui.QGridLayout(self.globalPage)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.crsWidget = QgsProjectionSelectionWidget(self.globalPage)
self.crsWidget.setObjectName(_fromUtf8("crsWidget"))
self.gridLayout_3.addWidget(self.crsWidget, 0, 1, 1, 2)
self.fontCombo = QtGui.QFontComboBox(self.globalPage)
self.fontCombo.setObjectName(_fromUtf8("fontCombo"))
self.gridLayout_3.addWidget(self.fontCombo, 3, 1, 1, 2)
self.snappingUnitCombo = QtGui.QComboBox(self.globalPage)
self.snappingUnitCombo.setObjectName(_fromUtf8("snappingUnitCombo"))
self.gridLayout_3.addWidget(self.snappingUnitCombo, 4, 2, 1, 1)
self.snappingToleranceSpin = QtGui.QDoubleSpinBox(self.globalPage)
self.snappingToleranceSpin.setObjectName(_fromUtf8("snappingToleranceSpin"))
self.gridLayout_3.addWidget(self.snappingToleranceSpin, 4, 1, 1, 1)
self.crsAuthidLabel = QtGui.QLabel(self.globalPage)
self.crsAuthidLabel.setObjectName(_fromUtf8("crsAuthidLabel"))
self.gridLayout_3.addWidget(self.crsAuthidLabel, 0, 0, 1, 1)
self.forceCrsCheck = QtGui.QCheckBox(self.globalPage)
self.forceCrsCheck.setText(_fromUtf8(""))
self.forceCrsCheck.setChecked(True)
self.forceCrsCheck.setObjectName(_fromUtf8("forceCrsCheck"))
self.gridLayout_3.addWidget(self.forceCrsCheck, 1, 1, 1, 2)
self.fontLabel = QtGui.QLabel(self.globalPage)
self.fontLabel.setObjectName(_fromUtf8("fontLabel"))
self.gridLayout_3.addWidget(self.fontLabel, 3, 0, 1, 1)
self.snappingLabel = QtGui.QLabel(self.globalPage)
self.snappingLabel.setObjectName(_fromUtf8("snappingLabel"))
self.gridLayout_3.addWidget(self.snappingLabel, 4, 0, 1, 1)
self.forceOtfCheck = QtGui.QCheckBox(self.globalPage)
self.forceOtfCheck.setText(_fromUtf8(""))
self.forceOtfCheck.setChecked(True)
self.forceOtfCheck.setObjectName(_fromUtf8("forceOtfCheck"))
self.gridLayout_3.addWidget(self.forceOtfCheck, 2, 1, 1, 2)
self.forceOtfLabel = QtGui.QLabel(self.globalPage)
self.forceOtfLabel.setObjectName(_fromUtf8("forceOtfLabel"))
self.gridLayout_3.addWidget(self.forceOtfLabel, 2, 0, 1, 1)
self.forceCrsLabel = QtGui.QLabel(self.globalPage)
self.forceCrsLabel.setObjectName(_fromUtf8("forceCrsLabel"))
self.gridLayout_3.addWidget(self.forceCrsLabel, 1, 0, 1, 1)
PreferencesWizard.addPage(self.globalPage)
self.retranslateUi(PreferencesWizard)
QtCore.QMetaObject.connectSlotsByName(PreferencesWizard)
def retranslateUi(self, PreferencesWizard):
PreferencesWizard.setWindowTitle(_translate("PreferencesWizard", "ARKspatial Preferences Wizard", None))
self.welcomePage.setTitle(_translate("PreferencesWizard", "ARKspatial Preferences Wizard", None))
self.welcomePage.setSubTitle(_translate("PreferencesWizard", "This is the first time you have run ARKspatial, so we need to set up some default settings first before creating a new project.", None))
self.preferencesPage.setTitle(_translate("PreferencesWizard", "Project Preferences", None))
self.preferencesPage.setSubTitle(_translate("PreferencesWizard", "Enter the default location for saving your projects, and your personal details for recording metadata.", None))
self.serverPage.setTitle(_translate("PreferencesWizard", "ARK Server Settings", None))
self.serverPage.setSubTitle(_translate("PreferencesWizard", "If you use an ARK database for project management or site recording, enter the server details to enable automatic population of your project details.", None))
self.globalPage.setTitle(_translate("PreferencesWizard", "QGIS Preferences", None))
self.globalPage.setSubTitle(_translate("PreferencesWizard", "We recommend you set some sensible defaults for your QGIS preferences.", None))
self.crsAuthidLabel.setText(_translate("PreferencesWizard", "Default CRS:", None))
self.fontLabel.setText(_translate("PreferencesWizard", "Font:", None))
self.snappingLabel.setText(_translate("PreferencesWizard", "Snapping:", None))
self.forceOtfLabel.setText(_translate("PreferencesWizard", "Force OTF Reprojection:", None))
self.forceCrsLabel.setText(_translate("PreferencesWizard", "Force Default CRS:", None))
def testShowingHiding(self):
""" test showing and hiding options """
w = QgsProjectionSelectionWidget()
# layer crs
w.setOptionVisible(QgsProjectionSelectionWidget.LayerCrs, False)
self.assertFalse(w.optionVisible(
QgsProjectionSelectionWidget.LayerCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.LayerCrs, True)
# should still be hidden, because layer crs not set
self.assertFalse(w.optionVisible(
QgsProjectionSelectionWidget.LayerCrs))
w.setLayerCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
self.assertTrue(w.optionVisible(QgsProjectionSelectionWidget.LayerCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.LayerCrs, False)
self.assertFalse(w.optionVisible(
QgsProjectionSelectionWidget.LayerCrs))
# project crs
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, True)
# should still be hidden, because project crs was not set
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
QgsProject.instance().setCrs(QgsCoordinateReferenceSystem('EPSG:3113'))
w = QgsProjectionSelectionWidget()
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, True)
self.assertTrue(
w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.ProjectCrs, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.ProjectCrs))
# default crs
w.setOptionVisible(QgsProjectionSelectionWidget.DefaultCrs, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.DefaultCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.DefaultCrs, True)
self.assertTrue(
w.optionVisible(QgsProjectionSelectionWidget.DefaultCrs))
# current crs
w = QgsProjectionSelectionWidget()
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, True)
self.assertTrue(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
w = QgsProjectionSelectionWidget()
w.setCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
w.setOptionVisible(QgsProjectionSelectionWidget.CurrentCrs, True)
self.assertTrue(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# not set
w = QgsProjectionSelectionWidget()
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, True)
self.assertTrue(w.optionVisible(
QgsProjectionSelectionWidget.CrsNotSet))
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster Layer'
PARAMETER_TABLE = 'Vector Layer'
PARAMETER_VECTOR = 'Feature Source'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Layer Field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple Input'
PARAMETER_BAND = 'Raster Band'
PARAMETER_MAP_LAYER = 'Map Layer'
paramTypes = [
PARAMETER_BOOLEAN, PARAMETER_EXTENT, PARAMETER_FILE, PARAMETER_NUMBER,
PARAMETER_RASTER, PARAMETER_STRING, PARAMETER_EXPRESSION,
PARAMETER_MAP_LAYER, PARAMETER_TABLE, PARAMETER_TABLE_FIELD,
PARAMETER_VECTOR, PARAMETER_POINT, PARAMETER_CRS, PARAMETER_MULTIPLE,
PARAMETER_BAND
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(
settings.value(
"/Processing/modelParametersDefinitionDialogGeometry",
QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.
tr('Default field name, or ; separated list of field names for multiple field parameters'
))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
in (ModelerParameterDefinitionDialog.PARAMETER_VECTOR,
ModelerParameterDefinitionDialog.PARAMETER_TABLE)
or isinstance(self.param, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'),
QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'),
QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'),
QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'),
QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'),
QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(
self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(
self.tr('Vector (No Geometry Required)'),
QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_NUMBER
or isinstance(self.param, QgsProcessingParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType(
) == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(1 if self.param.behavior(
) == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(
QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN
or isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description,
self.state.isChecked())
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD
or isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(
name,
description,
defaultValue=default,
parentLayerParameterName=parent,
type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND
or isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None,
parent)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MAP_LAYER
or isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(name, description)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_RASTER
or isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(name, description)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_TABLE
or isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_VECTOR
or isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description, self.datatypeCombo.currentData())
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_NUMBER
or isinstance(self.param, QgsProcessingParameterNumber)):
try:
self.param = QgsProcessingParameterNumber(
name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(
name, description, str(self.defaultEdit.expression()), parent)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXTENT
or isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(
name, description, QgsProcessingParameterFile.Folder
if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(
name, description,
self.selector.crs().authid())
if not self.requiredCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.reject(self)
def testShowingNotSetOption(self):
""" test showing the not set option """
w = QgsProjectionSelectionWidget()
# start with an invalid CRS
w.setCrs(QgsCoordinateReferenceSystem())
# add the not-set option
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, True)
self.assertTrue(w.optionVisible(
QgsProjectionSelectionWidget.CrsNotSet))
# current crs (which would show "invalid") should be hidden
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# hide not-set option
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, False)
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CrsNotSet))
# and now current crs option ('invalid') should be reshown
self.assertTrue(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# repeat with a slightly different workflow
w = QgsProjectionSelectionWidget()
# start with an invalid CRS
w.setCrs(QgsCoordinateReferenceSystem())
# add the not-set option
w.setOptionVisible(QgsProjectionSelectionWidget.CrsNotSet, True)
self.assertTrue(w.optionVisible(
QgsProjectionSelectionWidget.CrsNotSet))
# current crs (which would show "invalid") should be hidden
self.assertFalse(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
# now set a current crs
w.setCrs(QgsCoordinateReferenceSystem('EPSG:3111'))
# both current and not set options should be shown
self.assertTrue(
w.optionVisible(QgsProjectionSelectionWidget.CurrentCrs))
self.assertTrue(w.optionVisible(
QgsProjectionSelectionWidget.CrsNotSet))
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.
tr('Default field name, or ; separated list of field names for multiple field parameters'
))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
in (parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE)
or isinstance(self.param, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'),
QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'),
QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'),
QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'),
QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'),
QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(
self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(
self.tr('Vector (No Geometry Required)'),
QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_NUMBER
or self.paramType == parameters.PARAMETER_DISTANCE
or isinstance(self.param, (QgsProcessingParameterNumber,
QgsProcessingParameterDistance))):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType(
) == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == parameters.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(1 if self.param.behavior(
) == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == parameters.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(
QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
elif self.paramType == parameters.PARAMETER_ENUM or \
isinstance(self.param, QgsProcessingParameterEnum):
self.widget = EnumModelerWidget(self)
if self.param is not None:
self.widget.setAllowMultiple(bool(self.param.allowMultiple()))
self.widget.setOptions(self.param.options())
self.widget.setDefault(self.param.defaultValue())
self.verticalLayout.addWidget(self.widget)
elif self.paramType == parameters.PARAMETER_MATRIX or \
isinstance(self.param, QgsProcessingParameterMatrix):
self.widget = MatrixModelerWidget(self)
if self.param is not None:
self.widget.setValue(self.param.headers(),
self.param.defaultValue())
self.widget.setFixedRows(self.param.hasFixedNumberRows())
self.verticalLayout.addWidget(self.widget)
elif isinstance(self.param, QgsProcessingDestinationParameter):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultWidget = DestinationSelectionPanel(
self.param, self.alg, default_selection=True)
self.verticalLayout.addWidget(self.defaultWidget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
# If child algorithm output is mandatory, disable checkbox
if isinstance(self.param, QgsProcessingDestinationParameter):
provider_name, child_name, output_name = self.param.name().split(
':')
child = self.alg.childAlgorithms()['{}:{}'.format(
provider_name, child_name)]
model_output = child.modelOutput(output_name)
param_def = child.algorithm().parameterDefinition(
model_output.childOutputName())
if not (param_def.flags()
& QgsProcessingParameterDefinition.FlagOptional):
self.requiredCheck.setEnabled(False)
self.requiredCheck.setChecked(True)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
class ModelerParameterDefinitionDialog(QDialog):
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(
settings.value(
"/Processing/modelParametersDefinitionDialogGeometry",
QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.
tr('Default field name, or ; separated list of field names for multiple field parameters'
))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
in (parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE)
or isinstance(self.param, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'),
QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'),
QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'),
QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'),
QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'),
QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(
self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(
self.tr('Vector (No Geometry Required)'),
QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_NUMBER
or self.paramType == parameters.PARAMETER_DISTANCE
or isinstance(self.param, (QgsProcessingParameterNumber,
QgsProcessingParameterDistance))):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType(
) == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == parameters.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(1 if self.param.behavior(
) == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == parameters.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(
QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
elif self.paramType == parameters.PARAMETER_ENUM or \
isinstance(self.param, QgsProcessingParameterEnum):
self.widget = EnumModelerWidget(self)
if self.param is not None:
self.widget.setAllowMultiple(bool(self.param.allowMultiple()))
self.widget.setOptions(self.param.options())
self.widget.setDefault(self.param.defaultValue())
self.verticalLayout.addWidget(self.widget)
elif self.paramType == parameters.PARAMETER_MATRIX or \
isinstance(self.param, QgsProcessingParameterMatrix):
self.widget = MatrixModelerWidget(self)
if self.param is not None:
self.widget.setValue(self.param.headers(),
self.param.defaultValue())
self.widget.setFixedRows(self.param.hasFixedNumberRows())
self.verticalLayout.addWidget(self.widget)
elif isinstance(self.param, QgsProcessingDestinationParameter):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultWidget = DestinationSelectionPanel(
self.param, self.alg, default_selection=True)
self.verticalLayout.addWidget(self.defaultWidget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
# If child algorithm output is mandatory, disable checkbox
if isinstance(self.param, QgsProcessingDestinationParameter):
provider_name, child_name, output_name = self.param.name().split(
':')
child = self.alg.childAlgorithms()['{}:{}'.format(
provider_name, child_name)]
model_output = child.modelOutput(output_name)
param_def = child.algorithm().parameterDefinition(
model_output.childOutputName())
if not (param_def.flags()
& QgsProcessingParameterDefinition.FlagOptional):
self.requiredCheck.setEnabled(False)
self.requiredCheck.setChecked(True)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = self.nameTextBox.text()
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == parameters.PARAMETER_BOOLEAN
or isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description,
self.state.isChecked())
elif (self.paramType == parameters.PARAMETER_TABLE_FIELD
or isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(
name,
description,
defaultValue=default,
parentLayerParameterName=parent,
type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == parameters.PARAMETER_BAND
or isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None,
parent)
elif (self.paramType == parameters.PARAMETER_MAP_LAYER
or isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(name, description)
elif (self.paramType == parameters.PARAMETER_RASTER
or isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(name, description)
elif (self.paramType == parameters.PARAMETER_TABLE
or isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_VECTOR
or isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description, self.datatypeCombo.currentData())
elif (self.paramType == parameters.PARAMETER_NUMBER or isinstance(
self.param,
(QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
try:
self.param = QgsProcessingParameterNumber(
name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == parameters.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(
name, description, str(self.defaultEdit.expression()), parent)
elif (self.paramType == parameters.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_EXTENT
or isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == parameters.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(
name, description, QgsProcessingParameterFile.Folder
if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType == parameters.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(
name, description,
self.selector.crs().authid())
elif (self.paramType == parameters.PARAMETER_ENUM
or isinstance(self.param, QgsProcessingParameterEnum)):
self.param = QgsProcessingParameterEnum(
name, description, self.widget.options(),
self.widget.allowMultiple(), self.widget.defaultOptions())
elif (self.paramType == parameters.PARAMETER_MATRIX
or isinstance(self.param, QgsProcessingParameterMatrix)):
self.param = QgsProcessingParameterMatrix(
name,
description,
hasFixedNumberRows=self.widget.fixedRows(),
headers=self.widget.headers(),
defaultValue=self.widget.value())
# Destination parameter
elif (isinstance(self.param, QgsProcessingParameterFeatureSink)):
self.param = QgsProcessingParameterFeatureSink(
name=name,
description=self.param.description(),
type=self.param.dataType(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterFileDestination)):
self.param = QgsProcessingParameterFileDestination(
name=name,
description=self.param.description(),
fileFilter=self.param.fileFilter(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterFolderDestination)):
self.param = QgsProcessingParameterFolderDestination(
name=name,
description=self.param.description(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterRasterDestination)):
self.param = QgsProcessingParameterRasterDestination(
name=name,
description=self.param.description(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterVectorDestination)):
self.param = QgsProcessingParameterVectorDestination(
name=name,
description=self.param.description(),
type=self.param.dataType(),
defaultValue=self.defaultWidget.getValue())
else:
if self.paramType:
typeId = self.paramType
else:
typeId = self.param.type()
paramTypeDef = QgsApplication.instance().processingRegistry(
).parameterType(typeId)
if not paramTypeDef:
msg = self.tr(
'The parameter `{}` is not registered, are you missing a required plugin?'
.format(typeId))
raise UndefinedParameterException(msg)
self.param = paramTypeDef.create(name)
self.param.setDescription(description)
self.param.setMetadata(paramTypeDef.metadata())
if not self.requiredCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagOptional)
else:
self.param.setFlags(
self.param.flags()
& ~QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.reject(self)
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster layer'
PARAMETER_TABLE = 'Table'
PARAMETER_VECTOR = 'Vector layer'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Table field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple input'
paramTypes = [
PARAMETER_BOOLEAN,
PARAMETER_EXTENT,
PARAMETER_FILE,
PARAMETER_NUMBER,
PARAMETER_RASTER,
PARAMETER_STRING,
PARAMETER_EXPRESSION,
PARAMETER_TABLE,
PARAMETER_TABLE_FIELD,
PARAMETER_VECTOR,
PARAMETER_POINT,
PARAMETER_CRS,
PARAMETER_MULTIPLE
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
def setupUi(self):
self.setWindowTitle(self.tr('Parameter definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, ParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.value))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, ParameterTableField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description(), param.param.name())
if self.param is not None:
if self.param.parent == param.param.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.datatype is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.datatype + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.multiple)
self.verticalLayout.addWidget(self.multipleCheck)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, ParameterVector)):
self.verticalLayout.addWidget(QLabel(self.tr('Shape type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Any'))
self.shapetypeCombo.addItem(self.tr('Point'))
self.shapetypeCombo.addItem(self.tr('Line'))
self.shapetypeCombo.addItem(self.tr('Polygon'))
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.param.datatype[0] + 1)
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, ParameterMultipleInput)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Vector (any)'))
self.datatypeCombo.addItem(self.tr('Vector (point)'))
self.datatypeCombo.addItem(self.tr('Vector (line)'))
self.datatypeCombo.addItem(self.tr('Vector (polygon)'))
self.datatypeCombo.addItem(self.tr('Raster'))
self.datatypeCombo.addItem(self.tr('File'))
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.param.datatype + 1)
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, ParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.min))
self.maxTextBox.setText(str(self.param.max))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.default
if self.param.isInteger:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, ParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description(), param.param.name())
if self.param is not None:
if self.param.parent_layer == param.param.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, ParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, ParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.isFolder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, ParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, ParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.okPressed)
self.buttonBox.rejected.connect(self.cancelPressed)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def okPressed(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while name in self.alg.inputs:
name = safeName.lower() + str(i)
else:
name = self.param.name()
if (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or
isinstance(self.param, ParameterBoolean)):
self.param = ParameterBoolean(name, description, self.state.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or
isinstance(self.param, ParameterTableField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
self.param = ParameterTableField(name, description, parent, datatype, multiple=self.multipleCheck.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_RASTER or
isinstance(self.param, ParameterRaster)):
self.param = ParameterRaster(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE or
isinstance(self.param, ParameterTable)):
self.param = ParameterTable(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, ParameterVector)):
self.param = ParameterVector(
name, description,
[self.shapetypeCombo.currentIndex() - 1])
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, ParameterMultipleInput)):
self.param = ParameterMultipleInput(
name, description,
self.datatypeCombo.currentIndex() - 1)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, ParameterNumber)):
try:
vmin = self.minTextBox.text().strip()
if vmin == '':
vmin = None
else:
vmin = float(vmin)
vmax = self.maxTextBox.text().strip()
if vmax == '':
vmax = None
else:
vmax = float(vmax)
self.param = ParameterNumber(name, description, vmin, vmax,
str(self.defaultTextBox.text()))
except:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, ParameterExpression)):
parent = self.parentCombo.currentData()
self.param = ParameterExpression(name, description,
default=str(self.defaultEdit.expression()),
parent_layer=parent)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, ParameterString)):
self.param = ParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXTENT or
isinstance(self.param, ParameterExtent)):
self.param = ParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, ParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = ParameterFile(name, description, isFolder=isFolder)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, ParameterPoint)):
self.param = ParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, ParameterCrs)):
self.param = ParameterCrs(name, description, default=self.selector.crs().authid())
if not self.requiredCheck.isChecked():
self.param.setFlags(self.param.flags() | QgsProcessingParameterDefinition.FlagOptional)
self.close()
def cancelPressed(self):
self.param = None
self.close()
def setupUi(self, PreferencesWizard):
PreferencesWizard.setObjectName(_fromUtf8("PreferencesWizard"))
PreferencesWizard.resize(771, 443)
PreferencesWizard.setOptions(QtGui.QWizard.CancelButtonOnLeft|QtGui.QWizard.NoBackButtonOnStartPage|QtGui.QWizard.NoDefaultButton)
self.welcomePage = QtGui.QWizardPage()
self.welcomePage.setObjectName(_fromUtf8("welcomePage"))
self.gridLayout = QtGui.QGridLayout(self.welcomePage)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.label = QtGui.QLabel(self.welcomePage)
self.label.setText(_fromUtf8(""))
self.label.setObjectName(_fromUtf8("label"))
self.gridLayout.addWidget(self.label, 0, 0, 1, 1)
PreferencesWizard.addPage(self.welcomePage)
self.preferencesPage = PreferencesWizardPage()
self.preferencesPage.setObjectName(_fromUtf8("preferencesPage"))
self.gridLayout_2 = QtGui.QGridLayout(self.preferencesPage)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.preferencesWidget = PreferencesWidget(self.preferencesPage)
self.preferencesWidget.setObjectName(_fromUtf8("preferencesWidget"))
self.gridLayout_2.addWidget(self.preferencesWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.preferencesPage)
self.serverPage = ServerWizardPage()
self.serverPage.setObjectName(_fromUtf8("serverPage"))
self.serverLayout = QtGui.QGridLayout(self.serverPage)
self.serverLayout.setObjectName(_fromUtf8("serverLayout"))
self.serverWidget = ServerWidget(self.serverPage)
self.serverWidget.setObjectName(_fromUtf8("serverWidget"))
self.serverLayout.addWidget(self.serverWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.serverPage)
self.globalPage = GlobalPreferencesPage()
self.globalPage.setObjectName(_fromUtf8("globalPage"))
self.gridLayout_3 = QtGui.QGridLayout(self.globalPage)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.crsWidget = QgsProjectionSelectionWidget(self.globalPage)
self.crsWidget.setObjectName(_fromUtf8("crsWidget"))
self.gridLayout_3.addWidget(self.crsWidget, 0, 1, 1, 2)
self.fontCombo = QtGui.QFontComboBox(self.globalPage)
self.fontCombo.setObjectName(_fromUtf8("fontCombo"))
self.gridLayout_3.addWidget(self.fontCombo, 3, 1, 1, 2)
self.snappingUnitCombo = QtGui.QComboBox(self.globalPage)
self.snappingUnitCombo.setObjectName(_fromUtf8("snappingUnitCombo"))
self.gridLayout_3.addWidget(self.snappingUnitCombo, 4, 2, 1, 1)
self.snappingToleranceSpin = QtGui.QDoubleSpinBox(self.globalPage)
self.snappingToleranceSpin.setObjectName(_fromUtf8("snappingToleranceSpin"))
self.gridLayout_3.addWidget(self.snappingToleranceSpin, 4, 1, 1, 1)
self.crsAuthidLabel = QtGui.QLabel(self.globalPage)
self.crsAuthidLabel.setObjectName(_fromUtf8("crsAuthidLabel"))
self.gridLayout_3.addWidget(self.crsAuthidLabel, 0, 0, 1, 1)
self.forceCrsCheck = QtGui.QCheckBox(self.globalPage)
self.forceCrsCheck.setText(_fromUtf8(""))
self.forceCrsCheck.setChecked(True)
self.forceCrsCheck.setObjectName(_fromUtf8("forceCrsCheck"))
self.gridLayout_3.addWidget(self.forceCrsCheck, 1, 1, 1, 2)
self.fontLabel = QtGui.QLabel(self.globalPage)
self.fontLabel.setObjectName(_fromUtf8("fontLabel"))
self.gridLayout_3.addWidget(self.fontLabel, 3, 0, 1, 1)
self.snappingLabel = QtGui.QLabel(self.globalPage)
self.snappingLabel.setObjectName(_fromUtf8("snappingLabel"))
self.gridLayout_3.addWidget(self.snappingLabel, 4, 0, 1, 1)
self.forceOtfCheck = QtGui.QCheckBox(self.globalPage)
self.forceOtfCheck.setText(_fromUtf8(""))
self.forceOtfCheck.setChecked(True)
self.forceOtfCheck.setObjectName(_fromUtf8("forceOtfCheck"))
self.gridLayout_3.addWidget(self.forceOtfCheck, 2, 1, 1, 2)
self.forceOtfLabel = QtGui.QLabel(self.globalPage)
self.forceOtfLabel.setObjectName(_fromUtf8("forceOtfLabel"))
self.gridLayout_3.addWidget(self.forceOtfLabel, 2, 0, 1, 1)
self.forceCrsLabel = QtGui.QLabel(self.globalPage)
self.forceCrsLabel.setObjectName(_fromUtf8("forceCrsLabel"))
self.gridLayout_3.addWidget(self.forceCrsLabel, 1, 0, 1, 1)
PreferencesWizard.addPage(self.globalPage)
self.retranslateUi(PreferencesWizard)
QtCore.QMetaObject.connectSlotsByName(PreferencesWizard)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, ParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.value))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, ParameterTableField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description(), param.param.name())
if self.param is not None:
if self.param.parent == param.param.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.datatype is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.datatype + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.multiple)
self.verticalLayout.addWidget(self.multipleCheck)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, ParameterVector)):
self.verticalLayout.addWidget(QLabel(self.tr('Shape type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Any'))
self.shapetypeCombo.addItem(self.tr('Point'))
self.shapetypeCombo.addItem(self.tr('Line'))
self.shapetypeCombo.addItem(self.tr('Polygon'))
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.param.datatype[0] + 1)
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, ParameterMultipleInput)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Vector (any)'))
self.datatypeCombo.addItem(self.tr('Vector (point)'))
self.datatypeCombo.addItem(self.tr('Vector (line)'))
self.datatypeCombo.addItem(self.tr('Vector (polygon)'))
self.datatypeCombo.addItem(self.tr('Raster'))
self.datatypeCombo.addItem(self.tr('File'))
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.param.datatype + 1)
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, ParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.min))
self.maxTextBox.setText(str(self.param.max))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.default
if self.param.isInteger:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, ParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description(), param.param.name())
if self.param is not None:
if self.param.parent_layer == param.param.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, ParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, ParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.isFolder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, ParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, ParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.okPressed)
self.buttonBox.rejected.connect(self.cancelPressed)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
class Ui_PreferencesWizard(object):
def setupUi(self, PreferencesWizard):
PreferencesWizard.setObjectName(_fromUtf8("PreferencesWizard"))
PreferencesWizard.resize(771, 443)
PreferencesWizard.setOptions(QtGui.QWizard.CancelButtonOnLeft
| QtGui.QWizard.NoBackButtonOnStartPage
| QtGui.QWizard.NoDefaultButton)
self.welcomePage = QtGui.QWizardPage()
self.welcomePage.setObjectName(_fromUtf8("welcomePage"))
self.gridLayout = QtGui.QGridLayout(self.welcomePage)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.label = QtGui.QLabel(self.welcomePage)
self.label.setText(_fromUtf8(""))
self.label.setObjectName(_fromUtf8("label"))
self.gridLayout.addWidget(self.label, 0, 0, 1, 1)
PreferencesWizard.addPage(self.welcomePage)
self.preferencesPage = PreferencesWizardPage()
self.preferencesPage.setObjectName(_fromUtf8("preferencesPage"))
self.gridLayout_2 = QtGui.QGridLayout(self.preferencesPage)
self.gridLayout_2.setObjectName(_fromUtf8("gridLayout_2"))
self.preferencesWidget = PreferencesWidget(self.preferencesPage)
self.preferencesWidget.setObjectName(_fromUtf8("preferencesWidget"))
self.gridLayout_2.addWidget(self.preferencesWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.preferencesPage)
self.serverPage = ServerWizardPage()
self.serverPage.setObjectName(_fromUtf8("serverPage"))
self.serverLayout = QtGui.QGridLayout(self.serverPage)
self.serverLayout.setObjectName(_fromUtf8("serverLayout"))
self.serverWidget = ServerWidget(self.serverPage)
self.serverWidget.setObjectName(_fromUtf8("serverWidget"))
self.serverLayout.addWidget(self.serverWidget, 0, 0, 1, 1)
PreferencesWizard.addPage(self.serverPage)
self.globalPage = GlobalPreferencesPage()
self.globalPage.setObjectName(_fromUtf8("globalPage"))
self.gridLayout_3 = QtGui.QGridLayout(self.globalPage)
self.gridLayout_3.setObjectName(_fromUtf8("gridLayout_3"))
self.crsWidget = QgsProjectionSelectionWidget(self.globalPage)
self.crsWidget.setObjectName(_fromUtf8("crsWidget"))
self.gridLayout_3.addWidget(self.crsWidget, 0, 1, 1, 2)
self.fontCombo = QtGui.QFontComboBox(self.globalPage)
self.fontCombo.setObjectName(_fromUtf8("fontCombo"))
self.gridLayout_3.addWidget(self.fontCombo, 3, 1, 1, 2)
self.snappingUnitCombo = QtGui.QComboBox(self.globalPage)
self.snappingUnitCombo.setObjectName(_fromUtf8("snappingUnitCombo"))
self.gridLayout_3.addWidget(self.snappingUnitCombo, 4, 2, 1, 1)
self.snappingToleranceSpin = QtGui.QDoubleSpinBox(self.globalPage)
self.snappingToleranceSpin.setObjectName(
_fromUtf8("snappingToleranceSpin"))
self.gridLayout_3.addWidget(self.snappingToleranceSpin, 4, 1, 1, 1)
self.crsAuthidLabel = QtGui.QLabel(self.globalPage)
self.crsAuthidLabel.setObjectName(_fromUtf8("crsAuthidLabel"))
self.gridLayout_3.addWidget(self.crsAuthidLabel, 0, 0, 1, 1)
self.forceCrsCheck = QtGui.QCheckBox(self.globalPage)
self.forceCrsCheck.setText(_fromUtf8(""))
self.forceCrsCheck.setChecked(True)
self.forceCrsCheck.setObjectName(_fromUtf8("forceCrsCheck"))
self.gridLayout_3.addWidget(self.forceCrsCheck, 1, 1, 1, 2)
self.fontLabel = QtGui.QLabel(self.globalPage)
self.fontLabel.setObjectName(_fromUtf8("fontLabel"))
self.gridLayout_3.addWidget(self.fontLabel, 3, 0, 1, 1)
self.snappingLabel = QtGui.QLabel(self.globalPage)
self.snappingLabel.setObjectName(_fromUtf8("snappingLabel"))
self.gridLayout_3.addWidget(self.snappingLabel, 4, 0, 1, 1)
self.forceOtfCheck = QtGui.QCheckBox(self.globalPage)
self.forceOtfCheck.setText(_fromUtf8(""))
self.forceOtfCheck.setChecked(True)
self.forceOtfCheck.setObjectName(_fromUtf8("forceOtfCheck"))
self.gridLayout_3.addWidget(self.forceOtfCheck, 2, 1, 1, 2)
self.forceOtfLabel = QtGui.QLabel(self.globalPage)
self.forceOtfLabel.setObjectName(_fromUtf8("forceOtfLabel"))
self.gridLayout_3.addWidget(self.forceOtfLabel, 2, 0, 1, 1)
self.forceCrsLabel = QtGui.QLabel(self.globalPage)
self.forceCrsLabel.setObjectName(_fromUtf8("forceCrsLabel"))
self.gridLayout_3.addWidget(self.forceCrsLabel, 1, 0, 1, 1)
PreferencesWizard.addPage(self.globalPage)
self.retranslateUi(PreferencesWizard)
QtCore.QMetaObject.connectSlotsByName(PreferencesWizard)
def retranslateUi(self, PreferencesWizard):
PreferencesWizard.setWindowTitle(
_translate("PreferencesWizard", "ARKspatial Preferences Wizard",
None))
self.welcomePage.setTitle(
_translate("PreferencesWizard", "ARKspatial Preferences Wizard",
None))
self.welcomePage.setSubTitle(
_translate(
"PreferencesWizard",
"This is the first time you have run ARKspatial, so we need to set up some default settings first before creating a new project.",
None))
self.preferencesPage.setTitle(
_translate("PreferencesWizard", "Project Preferences", None))
self.preferencesPage.setSubTitle(
_translate(
"PreferencesWizard",
"Enter the default location for saving your projects, and your personal details for recording metadata.",
None))
self.serverPage.setTitle(
_translate("PreferencesWizard", "ARK Server Settings", None))
self.serverPage.setSubTitle(
_translate(
"PreferencesWizard",
"If you use an ARK database for project management or site recording, enter the server details to enable automatic population of your project details.",
None))
self.globalPage.setTitle(
_translate("PreferencesWizard", "QGIS Preferences", None))
self.globalPage.setSubTitle(
_translate(
"PreferencesWizard",
"We recommend you set some sensible defaults for your QGIS preferences.",
None))
self.crsAuthidLabel.setText(
_translate("PreferencesWizard", "Default CRS:", None))
self.fontLabel.setText(_translate("PreferencesWizard", "Font:", None))
self.snappingLabel.setText(
_translate("PreferencesWizard", "Snapping:", None))
self.forceOtfLabel.setText(
_translate("PreferencesWizard", "Force OTF Reprojection:", None))
self.forceCrsLabel.setText(
_translate("PreferencesWizard", "Force Default CRS:", None))