def __init__(self, caller):
self.caller = caller
self.apiClient = ApiClient()
self.runInThread = ThreadFuns.runInThread
self.curr_masternode_alias = None
self.curr_masternode_address = None
self.all_masternodes = {}
self.all_masternodes['last_update'] = 0
self.mnToStartList = []
self.ui = TabMain_gui(caller)
self.caller.tabMain = self.ui
self.sweepAllDlg = SweepAll_dlg(self)
# Connect GUI buttons
self.ui.button_addMasternode.clicked.connect(
lambda: self.onNewMasternode())
self.ui.button_startAll.clicked.connect(lambda: self.onStartAllMN())
self.ui.button_getAllStatus.clicked.connect(
lambda: self.onCheckAllMN())
self.ui.button_sweepAllRewards.clicked.connect(
lambda: self.onSweepAllRewards())
for masternode in self.caller.masternode_list:
name = masternode['name']
self.ui.btn_remove[name].clicked.connect(lambda: self.onRemoveMN())
self.ui.btn_edit[name].clicked.connect(lambda: self.onEditMN())
self.ui.btn_start[name].clicked.connect(lambda: self.onStartMN())
self.ui.btn_rewards[name].clicked.connect(
lambda: self.onRewardsMN())
def __init__(self, caller):
self.caller = caller
self.all_masternodes = {}
self.mnToStartList = []
self.ui = TabMain_gui(caller)
self.caller.tabMain = self.ui
self.sweepAllDlg = SweepAll_dlg(self)
# Connect GUI buttons
self.ui.button_addMasternode.clicked.connect(lambda: self.onNewMasternode())
self.ui.button_startAll.clicked.connect(lambda: self.onStartAllMN())
self.ui.button_getAllStatus.clicked.connect(lambda: self.onCheckAllMN())
self.ui.button_sweepAllRewards.clicked.connect(lambda: self.onSweepAllRewards())
for masternode in self.caller.masternode_list:
name = masternode['name']
self.ui.btn_remove[name].clicked.connect(lambda: self.onRemoveMN())
self.ui.btn_edit[name].clicked.connect(lambda: self.onEditMN())
self.ui.btn_start[name].clicked.connect(lambda: self.onStartMN())
self.ui.btn_rewards[name].clicked.connect(lambda: self.onRewardsMN())
class TabMain():
def __init__(self, caller):
self.caller = caller
self.apiClient = ApiClient()
self.runInThread = ThreadFuns.runInThread
self.curr_masternode_alias = None
self.curr_masternode_address = None
self.curr_statusData = None
self.mnToStartList = []
self.ui = TabMain_gui(caller)
self.caller.tabMain = self.ui
# Connect GUI buttons
self.ui.button_addMasternode.clicked.connect(
lambda: self.onNewMasternode())
self.ui.button_startAll.clicked.connect(lambda: self.onStartAllMN())
self.ui.button_getAllStatus.clicked.connect(
lambda: self.onCheckAllMN())
for masternode in self.caller.masternode_list:
name = masternode['name']
self.ui.btn_remove[name].clicked.connect(lambda: self.onRemoveMN())
self.ui.btn_edit[name].clicked.connect(lambda: self.onEditMN())
self.ui.btn_start[name].clicked.connect(lambda: self.onStartMN())
self.ui.btn_rewards[name].clicked.connect(
lambda: self.onRewardsMN())
self.ui.btn_status[name].clicked.connect(lambda: self.onCheckMN())
def checkMN(self, ctrl):
address = self.curr_masternode_address
# Check rpc connection
if not self.caller.rpcConnected:
self.caller.myPopUp2(QMessageBox.Critical,
'SPMT - hw device check',
"Connect to RPC server first")
printDbg("Unable to connect: %s" % self.caller.rpcStatusMess)
return None
self.curr_statusData = self.caller.rpcClient.getMNStatus(address)
try:
if self.curr_statusData is not None:
balance = self.apiClient.getBalance(address)
self.curr_statusData['balance'] = balance
except Exception as e:
err_msg = "exception in checkMN"
printException(getCallerName(), getFunctionName(), err_msg, e)
def displayMNStatus(self):
statusData = self.curr_statusData
masternode_alias = self.curr_masternode_alias
self.ui.btn_details[masternode_alias].disconnect()
self.ui.btn_details[masternode_alias].clicked.connect(
lambda: self.onDisplayStatusDetails(masternode_alias, statusData))
self.ui.btn_details[masternode_alias].show()
if statusData is None:
self.ui.mnLed[masternode_alias].setPixmap(
self.caller.ledGrayV_icon)
msg = "<b>ERROR! Masternode not found</b>"
self.ui.mnStatusLabel[masternode_alias].setText(msg)
self.ui.mnStatusLabel[masternode_alias].show()
self.ui.btn_details[masternode_alias].setEnabled(False)
else:
printDbg(
"Got status %s for %s (%s)" %
(statusData['status'], masternode_alias, statusData['addr']))
if statusData['status'] == 'ENABLED':
self.ui.mnLed[masternode_alias].setPixmap(
self.caller.ledGreenV_icon)
display_text = '<b>Status: </b><span style="color:green">%s</span>' % statusData[
'status']
else:
self.ui.mnLed[masternode_alias].setPixmap(
self.caller.ledRedV_icon)
display_text = '<b>Status: </b><span style="color:red">%s</span>' % statusData[
'status']
if statusData['balance'] is not None:
display_text += ' <b>Balance: </b><span style="color:purple">%s PIV</span>' % str(
statusData['balance'])
self.ui.mnStatusLabel[masternode_alias].setText(display_text)
self.ui.mnStatusLabel[masternode_alias].show()
self.ui.btn_details[masternode_alias].setEnabled(True)
@pyqtSlot()
def onCheckAllMN(self):
try:
printOK("Check-All pressed")
for masternode in self.caller.masternode_list:
self.curr_masternode_address = masternode['collateral'].get(
'address')
self.curr_masternode_alias = masternode['name']
printOK(
"Checking %s (%s)..." %
(self.curr_masternode_alias, self.curr_masternode_address))
self.checkMN(None)
self.displayMNStatus()
QApplication.processEvents()
except Exception as e:
err_msg = "error in checkAllMN"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onCheckMN(self, data=None):
if not data:
try:
target = self.ui.sender()
masternode_alias = target.alias
for mn_conf in self.caller.masternode_list:
if mn_conf['name'] == masternode_alias:
masternodeAddr = mn_conf['collateral'].get('address')
self.curr_masternode_alias = masternode_alias
self.curr_masternode_address = masternodeAddr
self.runInThread(self.checkMN, (),
self.displayMNStatus)
break
except Exception as e:
err_msg = "error in onCheckMN"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onDisplayStatusDetails(self, masternode_alias, statusData):
try:
ui = MnStatus_dlg(self.ui, masternode_alias, statusData)
ui.exec_()
except Exception as e:
err_msg = "error in displayStatusDetails"
printException(getCallerName(), getFunctionName(), err_msg, e.args)
@pyqtSlot()
def onEditMN(self, data=None):
if not data:
target = self.ui.sender()
masternode_alias = target.alias
try:
self.caller.tabs.insertTab(1, self.caller.tabMNConf,
"Configuration")
self.caller.tabs.setCurrentIndex(1)
for masternode in self.caller.masternode_list:
if masternode['name'] == masternode_alias:
self.caller.mnode_to_change = masternode
self.caller.tabMNConf.fillConfigForm(masternode)
break
except Exception as e:
print(e)
@pyqtSlot()
def onNewMasternode(self):
self.caller.tabs.insertTab(1, self.caller.tabMNConf, "Configuration")
self.caller.tabMNConf.clearConfigForm()
self.caller.tabs.setCurrentIndex(1)
@pyqtSlot()
def onRemoveMN(self, data=None):
if not data:
target = self.ui.sender()
masternode_alias = target.alias
reply = self.caller.myPopUp(
QMessageBox.Warning, 'Confirm REMOVE',
"Are you sure you want to remove\nmasternoode:'%s'" %
masternode_alias, QMessageBox.No)
if reply == QMessageBox.No:
return
for masternode in self.caller.masternode_list:
if masternode['name'] == masternode_alias:
self.caller.masternode_list.remove(masternode)
break
try:
writeMNfile(self.caller.masternode_list)
self.ui.myList.takeItem(
self.ui.myList.row(self.ui.current_mn[masternode_alias]))
except Exception as e:
err_msg = "Error writing masternode file"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onRewardsMN(self, data=None):
if not data:
target = self.ui.sender()
masternode_alias = target.alias
tab_index = self.caller.tabs.indexOf(self.caller.tabRewards)
self.caller.tabs.setCurrentIndex(tab_index)
self.caller.tabRewards.mnSelect.setCurrentText(masternode_alias)
@pyqtSlot()
def onStartAllMN(self):
printOK("Start-All pressed")
# Check RPC & dongle
if not self.caller.rpcConnected or self.caller.hwStatus != 2:
self.caller.myPopUp2(QMessageBox.Critical,
'SPMT - hw/rpc device check',
"Connect to RPC server and HW device first")
printDbg("Hardware device or RPC server not connected")
return None
try:
reply = self.caller.myPopUp(
QMessageBox.Question, 'Confirm START',
"Are you sure you want to start ALL masternodes?",
QMessageBox.Yes)
if reply == QMessageBox.Yes:
for mn_conf in self.caller.masternode_list:
self.masternodeToStart = Masternode(
self, mn_conf['name'], mn_conf['ip'], mn_conf['port'],
mn_conf['mnPrivKey'], mn_conf['hwAcc'],
mn_conf['collateral'])
# connect signal
self.masternodeToStart.sigdone.connect(self.sendBroadcast)
self.mnToStartList.append(self.masternodeToStart)
self.startMN()
except Exception as e:
err_msg = "error before starting node"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onStartMN(self, data=None):
# Check RPC & dongle
if not self.caller.rpcConnected or self.caller.hwStatus != 2:
self.caller.myPopUp2(QMessageBox.Critical,
'SPMT - hw/rpc device check',
"Connect to RPC server and HW device first")
printDbg("Hardware device or RPC server not connected")
return None
try:
if not data:
target = self.ui.sender()
masternode_alias = target.alias
printOK("Start-masternode %s pressed" % masternode_alias)
for mn_conf in self.caller.masternode_list:
if mn_conf['name'] == masternode_alias:
reply = self.caller.myPopUp(
QMessageBox.Question, 'Confirm START',
"Are you sure you want to start masternoode:\n'%s'?"
% mn_conf['name'], QMessageBox.Yes)
if reply == QMessageBox.Yes:
self.masternodeToStart = Masternode(
self, mn_conf['name'], mn_conf['ip'],
mn_conf['port'], mn_conf['mnPrivKey'],
mn_conf['hwAcc'], mn_conf['collateral'])
# connect signal
self.masternodeToStart.sigdone.connect(
self.sendBroadcast)
self.mnToStartList.append(self.masternodeToStart)
self.startMN()
break
except Exception as e:
err_msg = "error before starting node"
printException(getCallerName(), getFunctionName(), err_msg, e)
# Activated by signal 'sigdone' from masternode
def sendBroadcast(self, text):
if text == "None":
self.sendBroadcastCheck()
return
printOK("Start Message: %s" % text)
ret = self.caller.rpcClient.decodemasternodebroadcast(text)
if ret is None:
self.caller.myPopUp2(QMessageBox.Critical,
'message decoding failed',
'message decoding failed')
self.sendBroadcastCheck()
return
msg = "Broadcast START message?\n" + json.dumps(
ret, indent=4, sort_keys=True)
reply = self.caller.myPopUp(QMessageBox.Question, 'message decoded',
msg, QMessageBox.Yes)
if reply == QMessageBox.No:
self.sendBroadcastCheck()
return
ret2 = self.caller.rpcClient.relaymasternodebroadcast(text)
if json.dumps(ret2)[1:26] == "Masternode broadcast sent":
message = "Start-message was successfully sent to the network.<br>"
message += "If your remote server is correctly configured and connected to the network, "
message += "the output of the <b>./pivx-cli masternode status</b> command on the VPS should show:<br>"
message += "<br><em>\"message\": \"Masternode successfully started\"</em>"
self.caller.myPopUp2(QMessageBox.Information, 'message relayed',
message, QMessageBox.Ok)
else:
print(json.dumps(ret2)[1:26])
print("\n")
self.sendBroadcastCheck()
def sendBroadcastCheck(self):
# If list is not empty, start other masternodes
if self.mnToStartList:
self.startMN()
def startMN(self):
if self.caller.hwStatus != 2:
self.caller.myPopUp2(QMessageBox.Question,
'SPMT - hw device check',
self.caller.hwStatusMess, QMessageBox.Ok)
elif not self.caller.rpcConnected:
self.caller.myPopUp2(QMessageBox.Question,
'SPMT - rpc device check',
self.caller.rpcStatusMess, QMessageBox.Ok)
else:
try:
self.masternodeToStart = self.mnToStartList.pop()
printDbg("Starting...%s" % self.masternodeToStart.name)
self.masternodeToStart.startMessage(self.caller.hwdevice,
self.caller.rpcClient)
# wait for signal when masternode.work is ready then ---> sendBroadcast
except Exception as e:
err_msg = "error in startMN"
printException(getCallerName(), getFunctionName(), err_msg, e)
class TabMain():
def __init__(self, caller):
self.caller = caller
self.all_masternodes = {}
self.all_masternodes['last_update'] = 0
self.mnToStartList = []
self.ui = TabMain_gui(caller)
self.caller.tabMain = self.ui
self.sweepAllDlg = SweepAll_dlg(self)
# Connect GUI buttons
self.ui.button_addMasternode.clicked.connect(
lambda: self.onNewMasternode())
self.ui.button_startAll.clicked.connect(lambda: self.onStartAllMN())
self.ui.button_getAllStatus.clicked.connect(
lambda: self.onCheckAllMN())
self.ui.button_sweepAllRewards.clicked.connect(
lambda: self.onSweepAllRewards())
for masternode in self.caller.masternode_list:
name = masternode['name']
self.ui.btn_remove[name].clicked.connect(lambda: self.onRemoveMN())
self.ui.btn_edit[name].clicked.connect(lambda: self.onEditMN())
self.ui.btn_start[name].clicked.connect(lambda: self.onStartMN())
self.ui.btn_rewards[name].clicked.connect(
lambda: self.onRewardsMN())
def displayMNlistUpdated(self):
for masternode in self.caller.masternode_list:
printOK(
"Checking %s (%s)..." %
(masternode['name'], masternode['collateral'].get('address')))
self.displayMNStatus(masternode)
time.sleep(0.2)
def displayMNStatus(self, currMN):
statusData = None
for mn in self.all_masternodes.get('masternodes'):
#if mn.get('addr') == currMN['collateral'].get('address'):
if mn.get('txhash') == currMN['collateral'].get('txid') and mn.get(
'outidx') == currMN['collateral'].get('txidn'):
statusData = mn
if statusData is not None:
try:
statusData[
'balance'] = self.caller.apiClient.getBalance(
mn.get('addr'))
except Exception as e:
err_msg = "error getting balance of %s" % mn.get(
'addr')
printException(getCallerName(), getFunctionName(),
err_msg, e)
masternode_alias = currMN['name']
self.ui.btn_details[masternode_alias].disconnect()
self.ui.btn_details[masternode_alias].clicked.connect(
lambda: self.onDisplayStatusDetails(masternode_alias, statusData))
self.ui.btn_details[masternode_alias].show()
if statusData is None:
printDbg("%s (%s) not found" %
(masternode_alias, currMN['collateral'].get('address')))
self.ui.mnLed[masternode_alias].setPixmap(
self.caller.ledGrayV_icon)
msg = "<b>Masternode not found.</b>"
self.ui.mnStatusLabel[masternode_alias].setText(msg)
self.ui.mnStatusLabel[masternode_alias].show()
self.ui.btn_details[masternode_alias].setEnabled(False)
else:
display_text = ""
if statusData['balance'] is not None:
self.ui.mnBalance[masternode_alias].setText(
' <span style="color:purple">%s QMC</span>' %
str(statusData['balance']))
self.ui.mnBalance[masternode_alias].show()
printDbg(
"Got status %s for %s (%s)" %
(statusData['status'], masternode_alias, statusData['addr']))
if statusData['status'] == 'ENABLED':
self.ui.mnLed[masternode_alias].setPixmap(
self.caller.ledGreenV_icon)
display_text += '<span style="color:green">%s</span> ' % statusData[
'status']
position = statusData.get('queue_pos')
total_count = len(self.all_masternodes.get('masternodes'))
display_text += '%d/%d' % (position, total_count)
self.ui.mnStatusProgress[masternode_alias].setRange(
0, total_count)
self.ui.mnStatusProgress[masternode_alias].setValue(
total_count - position)
self.ui.mnStatusProgress[masternode_alias].show()
else:
self.ui.mnLed[masternode_alias].setPixmap(
self.caller.ledRedV_icon)
display_text += '<span style="color:red">%s</span> ' % statusData[
'status']
self.ui.mnStatusLabel[masternode_alias].setText(display_text)
self.ui.mnStatusLabel[masternode_alias].show()
self.ui.btn_details[masternode_alias].setEnabled(True)
QApplication.processEvents()
@pyqtSlot()
def onCheckAllMN(self):
if not self.caller.rpcConnected:
self.caller.myPopUp2(
QMessageBox.Critical, 'QMT - hw device check',
"RPC server must be connected to perform this action.")
printDbg("Unable to connect: %s" % self.caller.rpcStatusMess)
return
try:
printOK("Check-All pressed")
ThreadFuns.runInThread(self.updateAllMasternodes_thread, (),
self.displayMNlistUpdated)
except Exception as e:
err_msg = "error in checkAllMN"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onDisplayStatusDetails(self, masternode_alias, statusData):
try:
ui = MnStatus_dlg(self.ui, masternode_alias, statusData)
ui.exec_()
except Exception as e:
err_msg = "error in displayStatusDetails"
printException(getCallerName(), getFunctionName(), err_msg, e.args)
@pyqtSlot()
def onEditMN(self, data=None):
if not data:
target = self.ui.sender()
masternode_alias = target.alias
self.caller.tabs.insertTab(1, self.caller.tabMNConf,
"Configuration")
self.caller.tabs.setCurrentIndex(1)
for masternode in self.caller.masternode_list:
if masternode['name'] == masternode_alias:
self.caller.mnode_to_change = masternode
self.caller.tabMNConf.fillConfigForm(masternode)
break
@pyqtSlot()
def onNewMasternode(self):
self.caller.tabs.insertTab(1, self.caller.tabMNConf, "Configuration")
self.caller.tabMNConf.clearConfigForm()
self.caller.tabs.setCurrentIndex(1)
@pyqtSlot()
def onRemoveMN(self, data=None):
if not data:
target = self.ui.sender()
masternode_alias = target.alias
reply = self.caller.myPopUp(
QMessageBox.Warning, 'Confirm REMOVE',
"Are you sure you want to remove\nmasternoode:'%s'" %
masternode_alias, QMessageBox.No)
if reply == QMessageBox.No:
return
for masternode in self.caller.masternode_list:
if masternode['name'] == masternode_alias:
self.caller.masternode_list.remove(masternode)
break
try:
writeToFile(self.caller.masternode_list, masternodes_File)
self.ui.myList.takeItem(
self.ui.myList.row(self.ui.current_mn[masternode_alias]))
except Exception as e:
err_msg = "Error writing masternode file"
printException(getCallerName(), getFunctionName(), err_msg, e)
# Clear voting masternodes configuration and update cache
self.caller.t_governance.clear()
@pyqtSlot()
def onRewardsMN(self, data=None):
if not data:
target = self.ui.sender()
masternode_alias = target.alias
tab_index = self.caller.tabs.indexOf(self.caller.tabRewards)
self.caller.tabs.setCurrentIndex(tab_index)
self.caller.tabRewards.mnSelect.setCurrentText(masternode_alias)
@pyqtSlot()
def onStartAllMN(self):
printOK("Start-All pressed")
# Check RPC & dongle
if not self.caller.rpcConnected:
self.caller.myPopUp2(QMessageBox.Critical,
'QMT - hw/rpc device check',
"Connect to RPC server and HW device first")
printDbg("Hardware device or RPC server not connected")
return None
try:
reply = self.caller.myPopUp(
QMessageBox.Question, 'Confirm START',
"Are you sure you want to start ALL masternodes?",
QMessageBox.Yes)
if reply == QMessageBox.Yes:
mnList = [
x for x in self.caller.masternode_list if x['isHardware']
]
for mn_conf in mnList:
self.masternodeToStart = Masternode(
self, mn_conf['name'], mn_conf['ip'], mn_conf['port'],
mn_conf['mnPrivKey'], mn_conf['hwAcc'],
mn_conf['collateral'])
# connect signal
self.masternodeToStart.sigdone.connect(self.sendBroadcast)
self.mnToStartList.append(self.masternodeToStart)
self.startMN()
except Exception as e:
err_msg = "error before starting node"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onStartMN(self, data=None):
# Check RPC & dongle
if not self.caller.rpcConnected or self.caller.hwStatus != 2:
self.caller.myPopUp2(QMessageBox.Critical,
'QMT - hw/rpc device check',
"Connect to RPC server and HW device first")
printDbg("Hardware device or RPC server not connected")
return None
try:
if not data:
target = self.ui.sender()
masternode_alias = target.alias
printOK("Start-masternode %s pressed" % masternode_alias)
for mn_conf in self.caller.masternode_list:
if mn_conf['name'] == masternode_alias:
reply = self.caller.myPopUp(
QMessageBox.Question, 'Confirm START',
"Are you sure you want to start masternoode:\n'%s'?"
% mn_conf['name'], QMessageBox.Yes)
if reply == QMessageBox.Yes:
self.masternodeToStart = Masternode(
self, mn_conf['name'], mn_conf['ip'],
mn_conf['port'], mn_conf['mnPrivKey'],
mn_conf['hwAcc'], mn_conf['collateral'])
# connect signal
self.masternodeToStart.sigdone.connect(
self.sendBroadcast)
self.mnToStartList.append(self.masternodeToStart)
self.startMN()
break
except Exception as e:
err_msg = "error before starting node"
printException(getCallerName(), getFunctionName(), err_msg, e)
@pyqtSlot()
def onSweepAllRewards(self):
try:
self.sweepAllDlg.load_data()
self.sweepAllDlg.exec_()
except Exception as e:
err_msg = "exception in SweepAll_dlg"
printException(getCallerName(), getFunctionName(), err_msg, e)
# Activated by signal 'sigdone' from masternode
def sendBroadcast(self, text):
if text == "None":
self.sendBroadcastCheck()
return
printOK("Start Message: %s" % text)
ret = self.caller.rpcClient.decodemasternodebroadcast(text)
if ret is None:
self.caller.myPopUp2(QMessageBox.Critical,
'message decoding failed',
'message decoding failed')
self.sendBroadcastCheck()
return
msg = "Broadcast START message?\n" + json.dumps(
ret, indent=4, sort_keys=True)
reply = self.caller.myPopUp(QMessageBox.Question, 'message decoded',
msg, QMessageBox.Yes)
if reply == QMessageBox.No:
self.sendBroadcastCheck()
return
ret2 = self.caller.rpcClient.relaymasternodebroadcast(text)
if json.dumps(ret2)[1:26] == "Masternode broadcast sent":
message = "Start-message was successfully sent to the network.<br>"
message += "If your remote server is correctly configured and connected to the network, "
message += "the output of the <b>./qmc-cli masternode status</b> command on the VPS should show:<br>"
message += "<br><em>\"message\": \"Masternode successfully started\"</em>"
self.caller.myPopUp2(QMessageBox.Information, 'message relayed',
message, QMessageBox.Ok)
else:
print(json.dumps(ret2)[1:26])
print("\n")
self.sendBroadcastCheck()
def sendBroadcastCheck(self):
# If list is not empty, start other masternodes
if self.mnToStartList:
self.startMN()
def startMN(self):
if self.caller.hwStatus != 2:
self.caller.myPopUp2(QMessageBox.Question, 'QMT - hw device check',
self.caller.hwStatusMess, QMessageBox.Ok)
elif not self.caller.rpcConnected:
self.caller.myPopUp2(QMessageBox.Question,
'QMT - rpc device check',
self.caller.rpcStatusMess, QMessageBox.Ok)
else:
try:
self.masternodeToStart = self.mnToStartList.pop()
printDbg("Starting...%s" % self.masternodeToStart.name)
self.masternodeToStart.startMessage(self.caller.hwdevice,
self.caller.rpcClient)
# wait for signal when masternode.work is ready then ---> sendBroadcast
except Exception as e:
err_msg = "error in startMN"
printException(getCallerName(), getFunctionName(), err_msg, e)
def updateAllMasternodes_thread(self, ctrl):
# update only after 30 secs
if now() - self.all_masternodes['last_update'] > 30:
self.all_masternodes = self.caller.rpcClient.getMasternodes()