def __init__(self, parent=None):
QDialog.__init__(
self, parent, flags=Qt.WindowSystemMenuHint | Qt.WindowTitleHint)
self.setWindowTitle('Read Model')
self.treeview = parent
self.setAttribute(Qt.WA_DeleteOnClose)
fixed_dir_layout = QHBoxLayout()
browse_btn = QPushButton(ima.icon('DirOpenIcon'), '', self)
browse_btn.setToolTip(_("Select model directory"))
browse_btn.clicked.connect(self.select_directory)
self.wd_edit = QLineEdit()
fixed_dir_layout.addWidget(self.wd_edit)
fixed_dir_layout.addWidget(browse_btn)
fixed_dir_layout.setContentsMargins(0, 0, 0, 0)
namelabel = QLabel(_("Model Name"))
self.nameEdit = QLineEdit(self)
self.importWidget = ImportAsWidget(self, self.nameEdit)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(
QDialogButtonBox.Cancel|QDialogButtonBox.Ok)
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
mainLayout = QGridLayout(self)
mainLayout.addLayout(fixed_dir_layout, 0, 0, 1, 2)
mainLayout.addWidget(namelabel, 1, 0)
mainLayout.addWidget(self.nameEdit, 1, 1)
mainLayout.addWidget(self.importWidget, 2, 0, 1, 2)
mainLayout.addWidget(self.buttonBox, 3, 0, 1, 2)
# mainLayout.setContentsMargins(0, 0, 0, 0)
self.setLayout(mainLayout)
def setupui(self):
vbl = QGridLayout(self)
lab = QLabel('<h2>' + self.bpm + ' Triggered Acquisitions</h2>')
lab.setAlignment(Qt.AlignCenter)
vbl.addWidget(lab, 0, 0, 1, 2)
self.stack = QStackedLayout()
multi_pass = MultiTurnData(parent=self,
acq_type='ACQ',
prefix=self.prefix,
bpm=self.bpm)
multi_pass.setObjectName('multi_pass')
single_pass = SinglePassData(parent=self,
prefix=self.prefix,
bpm=self.bpm)
single_pass.setObjectName('single_pass')
self.stack.addWidget(multi_pass)
self.stack.addWidget(single_pass)
vbl.addLayout(self.stack, 1, 0)
config = ACQTrigConfigs(parent=self,
prefix=self.prefix,
bpm=self.bpm,
data_prefix='ACQ')
config.setObjectName('config')
vbl.addWidget(config, 1, 1)
self.setStyleSheet("""
#multi_pass{
min-width:50em;
min-height:48em;}
#single_pass{
min-width:50em;
min-height:48em;}
#config{
min-height:21em;}""")
def __init__(self, parent=None, prefix='', is_main=False):
"""Init."""
super().__init__(parent)
self.setObjectName('ITApp')
ld_tienbl = QLabel('Enable Pulses', self, alignment=Qt.AlignCenter)
bt_tienblsel = PyDMStateButton(
self, prefix + 'IT-EGH:TI-TrigGen:ChanOut-Sel')
led_tienblsts = SiriusLedState(
self, prefix + 'IT-EGH:TI-TrigGen:ChanOut-Sts')
lay = QGridLayout(self)
lay.setAlignment(Qt.AlignCenter)
lay.setContentsMargins(0, 0, 0, 0)
glay = QGridLayout()
glay.addWidget(ld_tienbl, 0, 0, 1, 2)
glay.addWidget(bt_tienblsel, 1, 0)
glay.addWidget(led_tienblsts, 1, 1)
if not is_main:
gbox = QGroupBox('Timing', self)
gbox.setLayout(glay)
lay.addWidget(gbox)
else:
lb_title = QLabel('<h3>IT - Timing</h3>',
self,
alignment=Qt.AlignCenter)
lay.setHorizontalSpacing(15)
lay.setVerticalSpacing(15)
lay.addWidget(lb_title, 0, 0)
lay.addLayout(glay, 1, 0)
def _setupCoeffSettingsWidget(self):
ld_coefchoo = QLabel('Choose Set', self, alignment=Qt.AlignRight)
cb_coefchoo = PyDMEnumComboBox(self, self.dev_pref + ':LDSET')
pb_coefload = PyDMPushButton(parent=self,
label='Apply Set',
icon=qta.icon('mdi.upload'),
init_channel=self.dev_pref +
':BO_CPCOEFF',
pressValue=1)
pb_coefload.setStyleSheet("icon-size:20px;")
pb_coefvrfy = PyDMPushButton(parent=self,
label='Verify Set',
icon=qta.icon('mdi.check-circle-outline'),
init_channel=self.dev_pref +
':BO_CVERIFY',
pressValue=1)
pb_coefvrfy.setStyleSheet("icon-size:20px;")
ld_gen = QLabel('<h4>Generate Coefficients</h4>',
self,
alignment=Qt.AlignCenter)
ld_gengain = QLabel('Gain [0-1]', self, alignment=Qt.AlignRight)
sb_gengain = PyDMSpinbox(self, self.dev_pref + ':FLT_GAIN')
sb_gengain.showStepExponent = False
ld_genphs = QLabel('Phase [°]', self, alignment=Qt.AlignRight)
sb_genphs = PyDMSpinbox(self, self.dev_pref + ':FLT_PHASE')
sb_genphs.showStepExponent = False
ld_genfreq = QLabel('Frequency [0-1]', self, alignment=Qt.AlignRight)
sb_genfreq = PyDMSpinbox(self, self.dev_pref + ':FLT_FREQ')
sb_genfreq.showStepExponent = False
ld_genntap = QLabel('Number of taps', self, alignment=Qt.AlignRight)
sb_genntap = PyDMSpinbox(self, self.dev_pref + ':FLT_TAPS')
sb_genntap.showStepExponent = False
wid = QWidget(self)
lay_genset = QGridLayout(wid)
lay_genset.setVerticalSpacing(6)
lay_genset.setHorizontalSpacing(9)
lay_genset.addWidget(ld_gen, 0, 1, 1, 2)
lay_genset.addWidget(ld_gengain, 1, 1)
lay_genset.addWidget(sb_gengain, 1, 2)
lay_genset.addWidget(ld_genphs, 2, 1)
lay_genset.addWidget(sb_genphs, 2, 2)
lay_genset.addWidget(ld_genfreq, 3, 1)
lay_genset.addWidget(sb_genfreq, 3, 2)
lay_genset.addWidget(ld_genntap, 4, 1)
lay_genset.addWidget(sb_genntap, 4, 2)
lay_genset.addWidget(ld_coefchoo, 5, 1)
lay_genset.addWidget(cb_coefchoo, 5, 2)
lay = QGridLayout()
lay_genset.addLayout(lay, 6, 1, 1, 2)
lay.addWidget(pb_coefload, 0, 0)
lay.addWidget(pb_coefvrfy, 0, 2)
lay.setColumnStretch(1, 2)
lay_genset.setRowStretch(7, 2)
lay_genset.setColumnStretch(0, 2)
lay_genset.setColumnStretch(3, 2)
return wid
def setup_gui(self):
"""Setup the main layout of the widget."""
layout = QGridLayout(self)
layout.setContentsMargins(0, 0, 0, 0)
layout.addWidget(self.canvas, 0, 0, Qt.AlignCenter)
layout.addLayout(self.setup_toolbar(), 0, 1, 2, 1)
layout.setRowStretch(1, 100)
layout.setSizeConstraint(layout.SetFixedSize)
def _setupFBSettingsWidget(self):
gbox_settings = QGroupBox('FeedBack Settings', self)
ld_fbpatt = QLabel('Feedback Mask', self)
le_fbpatt = PyDMLineEdit(self, self.dev_pref + ':FB_PATTERN')
ld_cfpatt = QLabel('Alternate Mask', self)
le_cfpatt = PyDMLineEdit(self, self.dev_pref + ':CF_PATTERN')
ld_alter_inuse = QLabel('Alternate Set In Use', self)
led_alter_inuse = SiriusLedState(
self, self.dev_pref + ':CF_PATTERN_SUB.VALB')
ld_fbenbl = QLabel('Enable', self)
pb_fbenbl = PyDMStateButton(self, self.dev_pref + ':FBCTRL')
ld_coefsel = QLabel('Coeficient Set', self)
cb_coefsel = PyDMEnumComboBox(self, self.dev_pref + ':SETSEL')
ld_sftgain = QLabel('Shift Gain', self)
sb_sftgain = PyDMSpinbox(self, self.dev_pref + ':SHIFTGAIN')
sb_sftgain.showStepExponent = False
ld_downspl = QLabel('Downsampling', self)
sb_downspl = PyDMSpinbox(self, self.dev_pref + ':PROC_DS')
sb_downspl.showStepExponent = False
ld_satthrs = QLabel('Sat. Threshold [%]', self)
sb_satthrs = PyDMSpinbox(self, self.dev_pref + ':SAT_THRESHOLD')
sb_satthrs.showStepExponent = False
lay_patt = QGridLayout()
lay_patt.addWidget(ld_fbpatt, 0, 0)
lay_patt.addWidget(le_fbpatt, 0, 1)
lay_patt.addWidget(ld_cfpatt, 1, 0)
lay_patt.addWidget(le_cfpatt, 1, 1)
lay_patt.addWidget(ld_alter_inuse, 2, 0)
lay_patt.addWidget(led_alter_inuse, 2, 1)
lay = QGridLayout(gbox_settings)
lay.addWidget(ld_fbenbl, 0, 1)
lay.addWidget(pb_fbenbl, 0, 2)
lay.addWidget(ld_downspl, 0, 4)
lay.addWidget(sb_downspl, 0, 5)
lay.addWidget(ld_coefsel, 1, 1)
lay.addWidget(cb_coefsel, 1, 2)
lay.addWidget(ld_sftgain, 1, 4)
lay.addWidget(sb_sftgain, 1, 5)
lay.addWidget(ld_satthrs, 2, 1)
lay.addWidget(sb_satthrs, 2, 2)
lay.addLayout(lay_patt, 4, 1, 1, 5)
lay.setColumnStretch(0, 3)
lay.setColumnStretch(6, 3)
lay.setColumnStretch(3, 2)
lay.setRowStretch(3, 2)
lay.setRowStretch(5, 3)
return gbox_settings
class HistogramWidget(QWidget):
def __init__(
self,
x: np.ndarray,
y: np.ndarray,
xlabel: Optional[str] = None,
ylabel: Optional[str] = None,
parent=None,
):
super(HistogramWidget, self).__init__(parent)
# set the width of the histogram plot to match the napari layer control width
self.setMinimumWidth(240)
self.setMaximumWidth(240)
self.hist_plot = Histogram(x,
y,
xlabel=xlabel,
ylabel=ylabel,
parent=self)
self.hist_plot.setMaximumWidth(230)
self.thresh_text = QLineEdit()
self.text_layout = QHBoxLayout()
self.text_layout.addWidget(QLabel("SNR threshold:"))
self.text_layout.addWidget(self.thresh_text)
self.text_layout.addItem(QSpacerItem(5, 1))
self.grid_layout = QGridLayout(self)
self.grid_layout.setContentsMargins(0, 0, 0, 0)
self.grid_layout.setSpacing(2)
# self.grid_layout.setColumnMinimumWidth(0, 86)
# self.grid_layout.setColumnStretch(1, 1)
self.grid_layout.addWidget(self.hist_plot, 0, 0, 4, 6)
self.grid_layout.addLayout(self.text_layout, 4, 0)
self.grid_layout.setRowStretch(5, 1)
self.grid_layout.setColumnStretch(1, 1)
self.setLayout(self.grid_layout)
self.threshold_changed_callbacks = []
self._on_hist_thresh_change()
# connect events
self.hist_plot.connect_line_dragged(self._on_hist_thresh_change)
self.thresh_text.returnPressed.connect(self._on_thresh_text_change)
def _on_hist_thresh_change(self):
hist_thresh_value = self.hist_plot._vert_line.getPos()[0]
self.thresh_text.setText(f"{hist_thresh_value:.2f}")
for func in self.threshold_changed_callbacks:
func()
def _on_thresh_text_change(self):
hist_thresh_value = float(self.thresh_text.text())
self.hist_plot._vert_line.setValue(hist_thresh_value)
def __init__(self, parent=None):
super(WidgetGallery, self).__init__(parent)
self.originalPalette = QApplication.palette()
styleComboBox = QComboBox()
styleComboBox.addItems(QStyleFactory.keys())
styleLabel = QLabel("&Style:")
styleLabel.setBuddy(styleComboBox)
self.useStylePaletteCheckBox = QCheckBox(
"&Use style's standard palette")
self.useStylePaletteCheckBox.setChecked(True)
disableWidgetsCheckBox = QCheckBox("&Disable widgets")
self.createTopLeftGroupBox()
self.createTopRightGroupBox()
self.createBottomLeftTabWidget()
self.createBottomRightGroupBox()
self.createProgressBar()
styleComboBox.activated[str].connect(self.changeStyle)
self.useStylePaletteCheckBox.toggled.connect(self.changePalette)
disableWidgetsCheckBox.toggled.connect(
self.topLeftGroupBox.setDisabled)
disableWidgetsCheckBox.toggled.connect(
self.topRightGroupBox.setDisabled)
disableWidgetsCheckBox.toggled.connect(
self.bottomLeftTabWidget.setDisabled)
disableWidgetsCheckBox.toggled.connect(
self.bottomRightGroupBox.setDisabled)
topLayout = QHBoxLayout()
topLayout.addWidget(styleLabel)
topLayout.addWidget(styleComboBox)
topLayout.addStretch(1)
topLayout.addWidget(self.useStylePaletteCheckBox)
topLayout.addWidget(disableWidgetsCheckBox)
mainLayout = QGridLayout()
mainLayout.addLayout(topLayout, 0, 0, 1, 2)
mainLayout.addWidget(self.topLeftGroupBox, 1, 0)
mainLayout.addWidget(self.topRightGroupBox, 1, 1)
mainLayout.addWidget(self.bottomLeftTabWidget, 2, 0)
mainLayout.addWidget(self.bottomRightGroupBox, 2, 1)
mainLayout.addWidget(self.progressBar, 3, 0, 1, 2)
mainLayout.setRowStretch(1, 1)
mainLayout.setRowStretch(2, 1)
mainLayout.setColumnStretch(0, 1)
mainLayout.setColumnStretch(1, 1)
self.setLayout(mainLayout)
self.changeStyle('Windows')
self.val = 0
def setup_gui(self):
"""Setup the main layout of the widget."""
layout = QGridLayout(self)
layout.setContentsMargins(0, 0, 0, 0)
layout.addWidget(self.canvas, 0, 1)
layout.addLayout(self.setup_toolbar(), 0, 3, 2, 1)
layout.setColumnStretch(0, 100)
layout.setColumnStretch(2, 100)
layout.setRowStretch(1, 100)
def setup_gui(self):
"""Setup the main layout of the widget."""
layout = QGridLayout(self)
layout.setContentsMargins(0, 0, 0, 0)
layout.addWidget(self.canvas, 0, 1)
layout.addLayout(self.setup_toolbar(), 0, 3, 2, 1)
layout.setColumnStretch(0, 100)
layout.setColumnStretch(2, 100)
layout.setRowStretch(1, 100)
def setupUI(self):
mainLayout = QGridLayout()
leftLayout = QVBoxLayout()
rightLayout = QVBoxLayout()
self.highLightLauncher = HighlightLauncher(self)
leftLayout.addWidget(self.highLightLauncher)
rightLayout.addWidget(self.noteEditor())
rightLayout.addWidget(self.textToSpeechUtility())
rightLayout.addWidget(self.utilities())
rightLayout.addStretch()
mainLayout.addLayout(leftLayout, 0, 0, 1, 2)
mainLayout.addLayout(rightLayout, 0, 2, 1, 1)
self.setLayout(mainLayout)
def setup_ui(self):
"""Initialize widgets."""
info_label = QLabel()
info_label.setText("Hit enter to capture your image!")
self.image_label = QLabel()
self.image_label.setMinimumSize(240, 320)
self.image_label.setScaledContents(True)
button_layout = QGridLayout()
self.style_buttons = [
QRadioButton(settings.STYLE_SHORTCUTS[i] + ". " + style.name
if i < len(settings.STYLE_SHORTCUTS) else style.name)
for i, style in enumerate(self.styles)
]
self.style_buttons[self.styles.index(
self.selected_style)].setChecked(True)
self.style_button_group = QButtonGroup()
for i, btn in enumerate(self.style_buttons):
button_layout.addWidget(btn, i // 3, i % 3)
self.style_button_group.addButton(btn, i)
btn.clicked.connect(
partial(lambda style: self.style_button_clicked(style),
self.styles[i]))
ctrl_layout = QHBoxLayout()
if not settings.KIOSK:
fullscreen_button = QPushButton('[ ]')
fullscreen_button.setMaximumWidth(
fullscreen_button.fontMetrics().boundingRect('[ ]').width() +
10)
fullscreen_button.clicked.connect(self.toggle_fullscreen)
ctrl_layout.addWidget(fullscreen_button)
ctrl_layout.addStretch(1)
self.size_combo = QComboBox()
for s in settings.SIZES:
self.size_combo.addItem(s)
self.size_combo.setCurrentIndex(settings.SIZES.index(self.quality))
ctrl_layout.addWidget(self.size_combo)
self.size_combo.activated[str].connect(self.quality_choice)
button_layout.addLayout(ctrl_layout,
(len(self.style_buttons) - 1) // 3 + 1, 0, 1,
3)
main_layout = QVBoxLayout()
main_layout.addWidget(info_label)
main_layout.addWidget(self.image_label, 1)
main_layout.addLayout(button_layout)
self.setLayout(main_layout)
def __init__(self, parent=None, modelpath=None):
QDialog.__init__(
self, parent, Qt.WindowSystemMenuHint | Qt.WindowTitleHint)
self.setWindowTitle('Write Model')
self.treeview = parent
self.setAttribute(Qt.WA_DeleteOnClose)
fixed_dir_layout = QHBoxLayout()
browse_btn = QPushButton(ima.icon('DirOpenIcon'), '', self)
browse_btn.setToolTip(_("Select Model Location"))
browse_btn.clicked.connect(self.select_directory)
namelabel = QLabel(_("Location"))
self.wd_edit = QLineEdit(self)
fixed_dir_layout.addWidget(namelabel)
fixed_dir_layout.addWidget(self.wd_edit)
fixed_dir_layout.addWidget(browse_btn)
fixed_dir_layout.setContentsMargins(0, 0, 0, 0)
namelabel = QLabel(_("Folder/File"))
self.nameEdit = QLineEdit(self)
if modelpath:
location = "/".join(modelpath.split("/")[:-1])
name = modelpath.split("/")[-1]
self.wd_edit.setText(location)
self.nameEdit.setText(name)
self.backupCheck = QCheckBox(_("Back up old folder"))
self.backupCheck.setCheckState(Qt.Checked)
self.zipmodelCheck = QCheckBox(_("Zip Model"))
self.zipmodelCheck.setCheckState(Qt.Unchecked)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(
QDialogButtonBox.Cancel|QDialogButtonBox.Ok)
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
mainLayout = QGridLayout(self)
mainLayout.addLayout(fixed_dir_layout, 0, 0, 1, 2)
mainLayout.addWidget(namelabel, 1, 0)
mainLayout.addWidget(self.nameEdit, 1, 1)
mainLayout.addWidget(self.backupCheck, 2, 0, 1, 2)
mainLayout.addWidget(self.zipmodelCheck, 3, 0, 1, 2)
mainLayout.addWidget(self.buttonBox, 4, 0, 1, 2)
# mainLayout.setContentsMargins(0, 0, 0, 0)
self.setLayout(mainLayout)
def _setupBCSettingsWidget(self):
gbox_settings = QGroupBox('Bunch Cleaning Settings', self)
ld_bcenbl = QLabel('Enable', self)
cb_bcenbl = PyDMStateButton(self, self.dev_pref + ':CLEAN_ENABLE')
ld_bcamp = QLabel('Amplitude', self)
sb_bcamp = PyDMSpinbox(self, self.dev_pref + ':CLEAN_AMPL')
sb_bcamp.showStepExponent = False
lb_svamp = PyDMLabel(self, self.dev_pref + ':CLEAN_SAVE_AMPL')
ld_bctune = QLabel('Tune', self)
sb_bctune = PyDMSpinbox(self, self.dev_pref + ':CLEAN_TUNE')
sb_bctune.showStepExponent = False
lb_svfreq = PyDMLabel(self, self.dev_pref + ':CLEAN_SAVE_FREQ')
ld_bcspan = QLabel('Span', self)
le_bcspan = PyDMLineEdit(self, self.dev_pref + ':CLEAN_SPAN')
lb_svspan = PyDMLabel(self, self.dev_pref + ':CLEAN_SAVE_SPAN')
ld_bcper = QLabel('Period', self)
le_bcper = PyDMLineEdit(self, self.dev_pref + ':CLEAN_PERIOD')
lb_svper = PyDMLabel(self, self.dev_pref + ':CLEAN_SAVE_PERIOD')
ld_bcpatt = QLabel('Mask', self)
le_bcpatt = PyDMLineEdit(self, self.dev_pref + ':CLEAN_PATTERN')
lay_clean = QGridLayout(gbox_settings)
lay_clean.addWidget(QLabel('SAVED VALS.'), 0, 2)
lay_clean.addWidget(ld_bcamp, 1, 0)
lay_clean.addWidget(sb_bcamp, 1, 1)
lay_clean.addWidget(lb_svamp, 1, 2)
lay_clean.addWidget(ld_bctune, 2, 0)
lay_clean.addWidget(sb_bctune, 2, 1)
lay_clean.addWidget(lb_svfreq, 2, 2)
lay_clean.addWidget(ld_bcspan, 3, 0)
lay_clean.addWidget(le_bcspan, 3, 1)
lay_clean.addWidget(lb_svspan, 3, 2)
lay_clean.addWidget(ld_bcper, 4, 0)
lay_clean.addWidget(le_bcper, 4, 1)
lay_clean.addWidget(lb_svper, 4, 2)
lay_clean.addWidget(ld_bcenbl, 5, 0)
lay_clean.addWidget(cb_bcenbl, 5, 1)
lay = QGridLayout()
lay.addWidget(ld_bcpatt, 0, 0)
lay.addWidget(le_bcpatt, 0, 1)
lay_clean.addLayout(lay, 6, 0, 1, 3)
return gbox_settings
def displayControlMPS(self, tab_type):
''' Display the desired tab widget '''
wid = QWidget(self)
if_glay = QGridLayout()
if tab_type != 0:
if_glay.addLayout(self.displayTempGroups(), 0, 0, 1, 1)
if_glay.setAlignment(Qt.AlignTop)
wid.setLayout(if_glay)
if tab_type == 0:
self.mps_glay = if_glay
self.changeWid(self.mps_glay)
return wid
def _setupUi(self):
self.label_title = QLabel('SI Current and Lifetime')
self.label_title.setStyleSheet("""
font-size:1.2em; font-weight:bold;
background-color: qlineargradient(spread:pad, x1:1, y1:0.0227273,
x2:0, y2:0, stop:0 rgba(173, 190, 207, 255),
stop:1 rgba(213, 213, 213, 255));""")
self.label_title.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
self.settings = QWidget()
vlay_sett = QVBoxLayout(self.settings)
vlay_sett.setContentsMargins(0, 0, 0, 0)
vlay_sett.addWidget(self._setupCurrentSettingsWidget())
vlay_sett.addWidget(self._setupLifetimeSettigsWidget())
vlay_sett.addWidget(self._setupGraphSettingsWidget())
self.pb_showsett = QPushButton('<', self)
self.pb_showsett.setObjectName('showsett')
self.pb_showsett.setToolTip('Hide settings')
self.pb_showsett.setStyleSheet(
'#showsett{min-width:0.7em;max-width:0.7em;}')
self.pb_showsett.released.connect(self._handle_settings_vis)
self.pb_showeff = QPushButton('v', self)
self.pb_showeff.setObjectName('showeff')
self.pb_showeff.setToolTip('Show efficiency graph')
self.pb_showeff.setStyleSheet(
'#showeff{min-width:0.7em;max-width:0.7em;}')
self.pb_showeff.released.connect(self._handle_efficiency_vis)
hbox_visi = QHBoxLayout()
hbox_visi.addStretch()
hbox_visi.addWidget(self.pb_showsett)
hbox_visi.addWidget(self.pb_showeff)
self.eff_graph = EffMonitor(self, self.prefix, self.device.sec)
self.eff_graph.setVisible(False)
cw = QWidget()
self.setCentralWidget(cw)
lay = QGridLayout(cw)
lay.addWidget(self.label_title, 0, 0, 1, 2)
lay.addLayout(self._setupGraphPanelLayout(), 1, 0)
lay.addWidget(self.settings, 1, 1)
lay.addLayout(hbox_visi, 2, 0, 1, 2, alignment=Qt.AlignRight)
lay.addWidget(self.eff_graph, 3, 0, 1, 2)
lay.setColumnStretch(0, 6)
lay.setColumnStretch(1, 1)
def _setupUi(self):
fbsett_wid = self._setupFeedbackSettings()
status_wid = self._setupStatusWidget()
lay = QGridLayout(self)
lay.setAlignment(Qt.AlignTop | Qt.AlignCenter)
if self._is_resumed:
led_gensts = SiriusLedAlert(self, self.dev_pref+':ERRSUM')
dev_label = QLabel(
'<h3>'+self._label+'</h3>', self, alignment=Qt.AlignCenter)
self.pb_detail = QPushButton(qta.icon('fa5s.ellipsis-v'), '', self)
self.pb_detail.setObjectName('dtls')
self.pb_detail.setStyleSheet(
'#dtls{min-width:20px;max-width:20px;icon-size:15px;}')
cmd = ['sirius-hla-si-di-bbb.py', '-dev', self.dev_pref]
if self._prefix:
cmd.extend(['-p', self._prefix])
connect_newprocess(self.pb_detail, cmd, self)
hbox_label = QHBoxLayout()
hbox_label.setContentsMargins(0, 0, 0, 0)
hbox_label.addWidget(led_gensts, alignment=Qt.AlignLeft)
hbox_label.addWidget(dev_label)
hbox_label.addWidget(self.pb_detail, alignment=Qt.AlignRight)
hbox_label.setStretch(0, 1)
hbox_label.setStretch(1, 10)
hbox_label.setStretch(2, 1)
wid = QWidget(self)
wid.setObjectName('box')
wid.setStyleSheet("""
#box{border: 2px solid gray;}""")
lay_box = QGridLayout(wid)
lay_box.setVerticalSpacing(15)
lay_box.addLayout(hbox_label, 0, 0)
lay_box.addWidget(fbsett_wid, 1, 0)
lay_box.addWidget(status_wid, 2, 0)
lay.setContentsMargins(0, 0, 0, 0)
lay.addWidget(wid)
else:
info_wid = BbBInfoWidget(self, self._prefix, self._device)
lay.addWidget(fbsett_wid, 0, 1)
lay.addWidget(status_wid, 0, 2)
lay.addWidget(info_wid, 0, 3)
lay.setColumnStretch(0, 3)
lay.setColumnStretch(4, 3)
lay.setRowStretch(1, 3)
def _setupUi(self):
self._ld_ilkistop = QLabel('Stop\n(Input)', self)
self._led_ilkistop = PyDMLed(
self, self.dev_pref.substitute(propty='IntlkInStop-Mon'))
self._led_ilkistop.offColor = PyDMLed.LightGreen
self._led_ilkistop.onColor = PyDMLed.Red
self._lb_ilkistop = PyDMLabel(
self, self.dev_pref.substitute(propty='IntlkInStop-Mon'))
hbox_ilkistop = QHBoxLayout()
hbox_ilkistop.addWidget(self._led_ilkistop)
hbox_ilkistop.addWidget(self._lb_ilkistop)
self._ld_ilkieopn = QLabel('Emergency Open Gap\n(Input)', self)
self._led_ilkieopn = PyDMLed(
self, self.dev_pref.substitute(propty='IntlkInEOpnGap-Mon'))
self._led_ilkieopn.offColor = PyDMLed.LightGreen
self._led_ilkieopn.onColor = PyDMLed.Red
self._lb_ilkieopn = PyDMLabel(
self, self.dev_pref.substitute(propty='IntlkInEOpnGap-Mon'))
hbox_eopngap = QHBoxLayout()
hbox_eopngap.addWidget(self._led_ilkieopn)
hbox_eopngap.addWidget(self._lb_ilkieopn)
self._ld_ilkogapopn = QLabel('Gap Opened\n(Output)', self)
self._lb_ilkogapopn = PyDMLabel(
self, self.dev_pref.substitute(propty='IntlkOutGapStt-Mon'))
self._lb_ilkogapopn.setAlignment(Qt.AlignCenter)
self._ld_ilkopwr = QLabel('Power Enabled\n(Output)', self)
self._led_ilkopwr = PyDMLed(
self, self.dev_pref.substitute(propty='IntlkOutPwrEnbld-Mon'))
self._led_ilkopwr.offColor = PyDMLed.Red
self._led_ilkopwr.onColor = PyDMLed.LightGreen
lay = QGridLayout(self)
lay.addWidget(
QLabel('<h4>Interlock status</h4>', self,
alignment=Qt.AlignCenter), 0, 0, 1, 2)
lay.addWidget(self._ld_ilkistop, 1, 0)
lay.addLayout(hbox_ilkistop, 1, 1)
lay.addWidget(self._ld_ilkieopn, 2, 0)
lay.addLayout(hbox_eopngap, 2, 1)
lay.addWidget(self._ld_ilkogapopn, 3, 0)
lay.addWidget(self._lb_ilkogapopn, 3, 1)
lay.addWidget(self._ld_ilkopwr, 4, 0)
lay.addWidget(self._led_ilkopwr, 4, 1)
def _setupUi(self):
self._label_dev = QLabel('Power supply: ', self)
self._label_dev.setStyleSheet(
'min-width: 8em; max-width: 8em;')
self.cb_sec = QComboBox(self)
for item in self._choose_sec:
self.cb_sec.addItem(item)
self.cb_sec.setCurrentText('SI')
self.cb_sec.currentTextChanged.connect(
self._handle_cb_visibility)
self.cb_sec.currentTextChanged.connect(
self._set_psnames)
self.cb_sub = QComboBox(self)
self.cb_sub.setEditable(True)
self.cb_sub.setMaxVisibleItems(10)
for item in self._choose_sub:
self.cb_sub.addItem(item)
self.cb_sub.currentTextChanged.connect(
self._set_psnames)
glay_choose = QGridLayout()
glay_choose.addWidget(self.cb_sub, 0, 0)
self.cb_dev = dict()
for sec in self._choose_sec:
visible = sec == 'SI'
self.cb_dev[sec] = QComboBox(self)
self.cb_dev[sec].setMaxVisibleItems(10)
self.cb_dev[sec].setVisible(visible)
for item in self._choose_dev[sec]:
self.cb_dev[sec].addItem(item)
self.cb_dev[sec].currentTextChanged.connect(
self._set_psnames)
glay_choose.addWidget(self.cb_dev[sec], 0, 1)
lay = QGridLayout(self)
lay.setContentsMargins(0, 0, 0, 0)
lay.addWidget(self._label_dev, 0, 0)
lay.addWidget(self.cb_sec, 0, 1)
lay.addLayout(glay_choose, 0, 2)
def _setupUi(self):
self._label_prop = QLabel('Properties: ', self)
self._label_prop.setStyleSheet(
'min-width: 8em; max-width: 8em;')
self._label_symb = QLabel()
icon = qta.icon('mdi.record-circle-outline')
pixmap = icon.pixmap(icon.actualSize(QSize(20, 20)))
self._label_symb.setPixmap(pixmap)
self._label_symb.setSizePolicy(QSzPlcy.Fixed, QSzPlcy.Fixed)
self.cb_prop_symb = QComboBox(self)
self.cb_prop_symb.currentTextChanged.connect(
self.propty_symb_changed.emit)
self.cb_prop_symb.setSizePolicy(
QSzPlcy.Expanding, QSzPlcy.Preferred)
self.cb_prop_symb.setMaxVisibleItems(10)
self.cb_prop_symb.addItems(self._choose_prop_symb)
hbox_prop_symb = QHBoxLayout()
hbox_prop_symb.addWidget(self._label_symb)
hbox_prop_symb.addWidget(self.cb_prop_symb)
self._label_line = QLabel()
icon = qta.icon('mdi.pulse')
pixmap = icon.pixmap(icon.actualSize(QSize(20, 20)))
self._label_line.setPixmap(pixmap)
self._label_line.setSizePolicy(QSzPlcy.Fixed, QSzPlcy.Fixed)
self.cb_prop_line = QComboBox(self)
self.cb_prop_line.currentTextChanged.connect(
self.propty_line_changed.emit)
self.cb_prop_line.setSizePolicy(
QSzPlcy.Expanding, QSzPlcy.Preferred)
self.cb_prop_line.setMaxVisibleItems(10)
self.cb_prop_line.addItems(self._choose_prop_line)
hbox_prop_line = QHBoxLayout()
hbox_prop_line.addWidget(self._label_line)
hbox_prop_line.addWidget(self.cb_prop_line)
lay = QGridLayout(self)
lay.setContentsMargins(0, 0, 0, 0)
lay.addWidget(self._label_prop, 0, 0)
lay.addLayout(hbox_prop_symb, 0, 1)
lay.addLayout(hbox_prop_line, 0, 2)
def _setupUi(self):
self.gbox_reliablemeas = self._setupReliableMeasWidget()
self.gbox_generalsettings = self._setupGeneralSettingsWidget()
self.gbox_trigger = self._setupTriggerWidget()
self.gbox_config = self._setupConfigurationWidget()
self.gbox_normalmode = self._setupMeasSettingsWidget('Normal')
self.gbox_fastmode = self._setupMeasSettingsWidget('Fast')
lay_mode = QGridLayout()
lay_mode.addWidget(self.gbox_normalmode, 0, 0)
lay_mode.addWidget(self.gbox_fastmode, 0, 0)
self.mode_channel = SiriusConnectionSignal(
self.dcct_prefix.substitute(propty='MeasMode-Sel'))
self.mode_channel.new_value_signal.connect(self._showMeasModeSettings)
lay = QGridLayout()
lay.addWidget(
QLabel('<h3>' + self.device + ' Settings Details</h3>',
self,
alignment=Qt.AlignCenter), 0, 0, 1, 2)
lay.addWidget(self.gbox_reliablemeas, 1, 0)
lay.addWidget(self.gbox_generalsettings, 2, 0)
lay.addWidget(self.gbox_config, 3, 0)
lay.addWidget(self.gbox_trigger, 3, 1)
lay.addLayout(lay_mode, 1, 1, 2, 1)
lay.setVerticalSpacing(15)
lay.setHorizontalSpacing(15)
lay.setRowStretch(0, 1)
lay.setRowStretch(1, 3)
lay.setRowStretch(2, 7)
lay.setRowStretch(3, 2)
self.setLayout(lay)
self.setStyleSheet("""
PyDMSpinbox, PyDMLabel{
min-width:6em; max-width:6em;
qproperty-alignment: AlignCenter;}
PyDMLedMultiChannel, PyDMStateButton, PyDMEnumComboBox{
min-width:6em; max-width:6em;}""")
def displayTempGroup(self, pv_data, title):
''' Display one temperature group'''
dtg_glay = QGridLayout()
dtg_glay.setHorizontalSpacing(0)
group = QGroupBox()
count = [1, 1]
dtg_glay = self.getSingleTitle(title, dtg_glay)
for counter_prefix in range(1, pv_data[0][0] + 1):
for counter_name in range(1, pv_data[0][1] + 1):
pv_name = self.genStringTempPV(pv_data[1], counter_prefix,
counter_name)
dtg_glay.addLayout(self.tempMonBox(pv_name), count[0],
count[1], 1, 1)
count = self.updateCount(count, title)
group.setTitle(title)
group.setLayout(dtg_glay)
return group
def _setupUi(self):
'''Build the graphic interface'''
wid = QWidget(self)
if_glay = QGridLayout()
if_glay.addLayout(self.display_header(), 0, 0, 1, 3)
if_glay.addLayout(self.display_graph(), 1, 0, 2, 1)
if_glay.addLayout(self.display_mainData(), 1, 1, 1, 1)
if_glay.addLayout(self.display_selectors(), 1, 2, 1, 1)
if_glay.setAlignment(Qt.AlignTop)
if_glay.setColumnStretch(0, 10)
wid.setLayout(if_glay)
self.setCentralWidget(wid)
def _setupUi(self):
self._ld_bbb = QLabel('<h3>BbB Control Window</h3>',
self,
alignment=Qt.AlignCenter)
self._but_fbe = QPushButton('FBE', self)
window = create_window_from_widget(BbBGPIOWidget,
title='Front-Back End',
icon=get_bbb_icon())
connect_window(self._but_fbe,
window,
self,
prefix=self.prefix,
device='SI-Glob:DI-BbBProc-L')
hlay = QHBoxLayout()
hlay.addWidget(self._but_fbe)
hlay.addStretch()
hlay.addWidget(self._ld_bbb)
hlay.addStretch()
idcs_types = ['H', 'V', 'L']
cwt = QWidget(self)
self.setCentralWidget(cwt)
lay = QGridLayout(cwt)
for col, idc in enumerate(idcs_types):
dev_pref = 'SI-Glob:DI-BbBProc-' + idc
wid = BbBMainSettingsWidget(self, self.prefix, dev_pref)
set_bbb_color(wid, dev_pref)
lay.addWidget(wid, 1, col)
self._bbb_widgets.append(wid)
lay.addLayout(hlay, 0, 0, 1, len(idcs_types))
lay.setRowStretch(0, 1)
lay.setRowStretch(1, 6)
def __init__(self, parent):
super().__init__(parent)
self.setWindowTitle("Interpolate bad channels")
vbox = QVBoxLayout(self)
grid = QGridLayout()
grid.addWidget(QLabel("Reset bads:"), 0, 0)
self.reset_bads_checkbox = QCheckBox()
self.reset_bads_checkbox.setChecked(True)
grid.addWidget(self.reset_bads_checkbox, 0, 1)
grid.addWidget(QLabel("Mode:"), 1, 0)
self.mode_select = QComboBox()
self.modes = {"Accurate": "accurate", "Fast": "fast"}
self.mode_select.addItems(self.modes.keys())
self.mode_select.setCurrentText("Accurate")
grid.addWidget(self.mode_select, 1, 1)
grid.addWidget(QLabel("Origin (x, y, z):"), 2, 0)
hbox = QHBoxLayout()
self.x = QDoubleSpinBox()
self.x.setValue(0)
self.x.setDecimals(3)
hbox.addWidget(self.x)
self.y = QDoubleSpinBox()
self.y.setValue(0)
self.y.setDecimals(3)
hbox.addWidget(self.y)
self.z = QDoubleSpinBox()
self.z.setValue(0.04)
self.z.setDecimals(3)
hbox.addWidget(self.z)
grid.addLayout(hbox, 2, 1)
vbox.addLayout(grid)
buttonbox = QDialogButtonBox(QDialogButtonBox.Ok
| QDialogButtonBox.Cancel)
vbox.addWidget(buttonbox)
buttonbox.accepted.connect(self.accept)
buttonbox.rejected.connect(self.reject)
vbox.setSizeConstraint(QVBoxLayout.SetFixedSize)
def _setupUi(self):
ld_gpio = QLabel('<h3>GPIO Settings</h3>',
self,
alignment=Qt.AlignCenter)
vlay1 = QVBoxLayout()
vlay1.addWidget(self._setupFrontBackEndRegsWidget())
vlay1.addWidget(self._setupOtherControlsWidget())
vlay2 = QVBoxLayout()
vlay2.addWidget(self._setupPhaseServoLoopWidget())
vlay2.addWidget(self._setupThermoWidget())
lay = QGridLayout(self)
lay.addWidget(ld_gpio, 0, 1, 1, 2)
lay.addLayout(vlay1, 1, 1)
lay.addLayout(vlay2, 1, 2)
lay.addWidget(self._setupMonitorsWidget(), 2, 1, 1, 2)
lay.setColumnStretch(0, 3)
lay.setColumnStretch(3, 3)
lay.setRowStretch(3, 3)
self.setStyleSheet("""PyDMLabel{qproperty-alignment: AlignCenter;}""")
def get_singular_values_widget(self, parent):
"""."""
svs_wid = QWidget(parent)
svs_lay = QGridLayout(svs_wid)
wid = self.create_pair(svs_wid, 'MinSingValue')
lbl = QLabel('Min. SV: ')
svs_lay.addWidget(lbl, 0, 0)
svs_lay.addWidget(wid, 0, 1)
wid = self.create_pair(svs_wid, 'TikhonovRegConst')
lbl = QLabel('Tikhonov: ')
svs_lay.addWidget(lbl, 1, 0)
svs_lay.addWidget(wid, 1, 1)
lbl = QLabel('Nr Sing Vals')
lbls = SiriusLabel(
svs_wid, self.devpref.substitute(propty='NrSingValues-Mon'))
btn = QPushButton('', svs_wid)
btn.setToolTip('Check Singular Values')
btn.setIcon(qta.icon('mdi.chart-line'))
btn.setObjectName('btn')
btn.setStyleSheet('#btn{max-width:30px; icon-size:30px;}')
hbl = QHBoxLayout()
hbl.addWidget(btn)
hbl.addStretch()
hbl.addWidget(lbl)
hbl.addWidget(lbls)
svs_lay.addLayout(hbl, 2, 0, 1, 2)
Window = create_window_from_widget(
SingularValues, title='Check Singular Values')
connect_window(
btn, Window, svs_wid, device=self.device, prefix=self.prefix)
return svs_wid
class Form(QWidget):
def __init__(self, parent=None):
super(Form, self).__init__(parent)
self.layout = QVBoxLayout()
self.layout.setContentsMargins(5, 5, 5, 5)
h_layout = QHBoxLayout()
self.list = QListWidget()
self.list.resize(20, 50)
h_layout.addWidget(self.list)
manager = ResourceManager()
self.data = manager.run(100)
self.grid = QGridLayout(self)
self.grid.addLayout(self.layout, 0, 0, 4, 4)
self.grid.addLayout(h_layout, 0, 2, 1, 1)
for key, value in self.data.items():
self.list.addItem(key)
self.setLayout(self.grid)
self.list.currentTextChanged.connect(self.rewrite_data)
def rewrite_data(self, args):
self.layout = QVBoxLayout()
self.grid.addLayout(self.layout, 0, 0, 1, 1)
for key, value in self.data[args].items():
chart = QChart()
chart_view = QChartView(chart)
series = QLineSeries()
series.setName(key)
for i in value:
series.append(QPointF(i[0], i[1]))
chart.addSeries(series)
chart.createDefaultAxes()
self.layout.addWidget(chart_view)
def start(self):
self.message('Настройти до конца')
def message(self, message):
error = QErrorMessage(self)
error.showMessage(message)
def displayGroup(self, pv_data, title, group_type):
''' Display one MPS group '''
dg_glay = QGridLayout()
group = QGroupBox()
count = [1, 1]
dg_glay = self.getSingleTitle(title, dg_glay)
index = 0
for pv_name in pv_data.get('name'):
if title != 'Gate Valve':
if group_type == 0:
dg_glay.addLayout(
self.dispayHiddenControls(
pv_name,
self.getPVControl(pv_data.get('control'), index),
self.getPVConfig(pv_data.get('config'), index)),
count[0], count[1], 1, 1)
else:
dg_glay.addLayout(
self.dispayAllControls(
pv_name,
self.getPVControl(pv_data.get('control'), index),
self.getPVConfig(pv_data.get('config'), index)),
count[0], count[1], 1, 1)
else:
dg_glay.addLayout(
self.gateValve(
pv_name, self.getPVConfig(pv_data.get('config'),
index)), count[0], count[1],
1, 1)
count = self.updateCount(count, title)
index += 1
group.setTitle(title)
group.setLayout(dg_glay)
return group
def __init__(self, parent, enable_replace=False):
QWidget.__init__(self, parent)
self.enable_replace = enable_replace
self.editor = None
self.is_code_editor = None
glayout = QGridLayout()
glayout.setContentsMargins(0, 0, 0, 0)
self.setLayout(glayout)
self.close_button = create_toolbutton(
self, triggered=self.hide, icon=ima.icon('DialogCloseButton'))
glayout.addWidget(self.close_button, 0, 0)
# Find layout
self.search_text = PatternComboBox(self,
tip=_("Search string"),
adjust_to_minimum=False)
self.return_shift_pressed.connect(
lambda: self.find(changed=False,
forward=False,
rehighlight=False,
multiline_replace_check=False))
self.return_pressed.connect(
lambda: self.find(changed=False,
forward=True,
rehighlight=False,
multiline_replace_check=False))
self.search_text.lineEdit().textEdited.connect(
self.text_has_been_edited)
self.number_matches_text = QLabel(self)
self.previous_button = create_toolbutton(self,
triggered=self.find_previous,
icon=ima.icon('ArrowUp'),
tip=_("Find previous"))
self.next_button = create_toolbutton(self,
triggered=self.find_next,
icon=ima.icon('ArrowDown'),
tip=_("Find next"))
self.next_button.clicked.connect(self.update_search_combo)
self.previous_button.clicked.connect(self.update_search_combo)
self.re_button = create_toolbutton(self,
icon=ima.icon('regex'),
tip=_("Regular expression"))
self.re_button.setCheckable(True)
self.re_button.toggled.connect(lambda state: self.find())
self.case_button = create_toolbutton(
self, icon=ima.icon("format_letter_case"), tip=_("Case Sensitive"))
self.case_button.setCheckable(True)
self.case_button.toggled.connect(lambda state: self.find())
self.words_button = create_toolbutton(self,
icon=get_icon("whole_words.png"),
tip=_("Whole words"))
self.words_button.setCheckable(True)
self.words_button.toggled.connect(lambda state: self.find())
self.highlight_button = create_toolbutton(
self, icon=get_icon("highlight.png"), tip=_("Highlight matches"))
self.highlight_button.setCheckable(True)
self.highlight_button.toggled.connect(self.toggle_highlighting)
hlayout = QHBoxLayout()
self.widgets = [
self.close_button, self.search_text, self.number_matches_text,
self.previous_button, self.next_button, self.re_button,
self.case_button, self.words_button, self.highlight_button
]
for widget in self.widgets[1:]:
hlayout.addWidget(widget)
glayout.addLayout(hlayout, 0, 1)
# Replace layout
replace_with = QLabel(_("Replace with:"))
self.replace_text = PatternComboBox(self,
adjust_to_minimum=False,
tip=_('Replace string'))
self.replace_text.valid.connect(
lambda _: self.replace_find(focus_replace_text=True))
self.replace_button = create_toolbutton(
self,
text=_('Replace/find next'),
icon=ima.icon('DialogApplyButton'),
triggered=self.replace_find,
text_beside_icon=True)
self.replace_sel_button = create_toolbutton(
self,
text=_('Replace in selection'),
icon=ima.icon('DialogApplyButton'),
triggered=self.replace_find_selection,
text_beside_icon=True)
self.replace_sel_button.clicked.connect(self.update_replace_combo)
self.replace_sel_button.clicked.connect(self.update_search_combo)
self.replace_all_button = create_toolbutton(
self,
text=_('Replace all'),
icon=ima.icon('DialogApplyButton'),
triggered=self.replace_find_all,
text_beside_icon=True)
self.replace_all_button.clicked.connect(self.update_replace_combo)
self.replace_all_button.clicked.connect(self.update_search_combo)
self.replace_layout = QHBoxLayout()
widgets = [
replace_with, self.replace_text, self.replace_button,
self.replace_sel_button, self.replace_all_button
]
for widget in widgets:
self.replace_layout.addWidget(widget)
glayout.addLayout(self.replace_layout, 1, 1)
self.widgets.extend(widgets)
self.replace_widgets = widgets
self.hide_replace()
self.search_text.setTabOrder(self.search_text, self.replace_text)
self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
self.shortcuts = self.create_shortcuts(parent)
self.highlight_timer = QTimer(self)
self.highlight_timer.setSingleShot(True)
self.highlight_timer.setInterval(1000)
self.highlight_timer.timeout.connect(self.highlight_matches)
self.search_text.installEventFilter(self)
class DataFrameEditor(QDialog):
"""
Dialog for displaying and editing DataFrame and related objects.
Signals
-------
sig_option_changed(str, object): Raised if an option is changed.
Arguments are name of option and its new value.
"""
sig_option_changed = Signal(str, object)
def __init__(self, parent=None):
QDialog.__init__(self, parent)
# Destroying the C++ object right after closing the dialog box,
# otherwise it may be garbage-collected in another QThread
# (e.g. the editor's analysis thread in Spyder), thus leading to
# a segmentation fault on UNIX or an application crash on Windows
self.setAttribute(Qt.WA_DeleteOnClose)
self.is_series = False
self.layout = None
def setup_and_check(self, data, title=''):
"""
Setup DataFrameEditor:
return False if data is not supported, True otherwise.
Supported types for data are DataFrame, Series and Index.
"""
self.layout = QGridLayout()
self.setLayout(self.layout)
self.setWindowIcon(ima.icon('arredit'))
if title:
title = to_text_string(title) + " - %s" % data.__class__.__name__
else:
title = _("%s editor") % data.__class__.__name__
if isinstance(data, Series):
self.is_series = True
data = data.to_frame()
elif isinstance(data, Index):
data = DataFrame(data)
self.setWindowTitle(title)
self.resize(600, 500)
self.dataModel = DataFrameModel(data, parent=self)
self.dataTable = DataFrameView(self, self.dataModel)
self.layout.addWidget(self.dataTable)
self.setLayout(self.layout)
self.setMinimumSize(400, 300)
# Make the dialog act as a window
self.setWindowFlags(Qt.Window)
btn_layout = QHBoxLayout()
btn = QPushButton(_("Format"))
# disable format button for int type
btn_layout.addWidget(btn)
btn.clicked.connect(self.change_format)
btn = QPushButton(_('Resize'))
btn_layout.addWidget(btn)
btn.clicked.connect(self.resize_to_contents)
bgcolor = QCheckBox(_('Background color'))
bgcolor.setChecked(self.dataModel.bgcolor_enabled)
bgcolor.setEnabled(self.dataModel.bgcolor_enabled)
bgcolor.stateChanged.connect(self.change_bgcolor_enable)
btn_layout.addWidget(bgcolor)
self.bgcolor_global = QCheckBox(_('Column min/max'))
self.bgcolor_global.setChecked(self.dataModel.colum_avg_enabled)
self.bgcolor_global.setEnabled(not self.is_series and
self.dataModel.bgcolor_enabled)
self.bgcolor_global.stateChanged.connect(self.dataModel.colum_avg)
btn_layout.addWidget(self.bgcolor_global)
btn_layout.addStretch()
bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Cancel)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
btn_layout.addWidget(bbox)
self.layout.addLayout(btn_layout, 2, 0)
return True
def change_bgcolor_enable(self, state):
"""
This is implementet so column min/max is only active when bgcolor is
"""
self.dataModel.bgcolor(state)
self.bgcolor_global.setEnabled(not self.is_series and state > 0)
def change_format(self):
"""
Ask user for display format for floats and use it.
This function also checks whether the format is valid and emits
`sig_option_changed`.
"""
format, valid = QInputDialog.getText(self, _('Format'),
_("Float formatting"),
QLineEdit.Normal,
self.dataModel.get_format())
if valid:
format = str(format)
try:
format % 1.1
except:
msg = _("Format ({}) is incorrect").format(format)
QMessageBox.critical(self, _("Error"), msg)
return
if not format.startswith('%'):
msg = _("Format ({}) should start with '%'").format(format)
QMessageBox.critical(self, _("Error"), msg)
return
self.dataModel.set_format(format)
self.sig_option_changed.emit('dataframe_format', format)
def get_value(self):
"""Return modified Dataframe -- this is *not* a copy"""
# It is import to avoid accessing Qt C++ object as it has probably
# already been destroyed, due to the Qt.WA_DeleteOnClose attribute
df = self.dataModel.get_data()
if self.is_series:
return df.iloc[:, 0]
else:
return df
def resize_to_contents(self):
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
self.dataTable.resizeColumnsToContents()
self.dataModel.fetch_more(columns=True)
self.dataTable.resizeColumnsToContents()
QApplication.restoreOverrideCursor()
def __init__(self, parent=None):
super(KernelConnectionDialog, self).__init__(parent)
self.setWindowTitle(_('Connect to an existing kernel'))
main_label = QLabel(_(
"<p>Please select the JSON connection file (<i>e.g.</i> "
"<tt>kernel-1234.json</tt>) of the existing kernel, and enter "
"the SSH information if connecting to a remote machine. "
"To learn more about starting external kernels and connecting "
"to them, see <a href=\"https://docs.spyder-ide.org/"
"ipythonconsole.html#connect-to-an-external-kernel\">"
"our documentation</a>.</p>"))
main_label.setWordWrap(True)
main_label.setAlignment(Qt.AlignJustify)
main_label.setOpenExternalLinks(True)
# Connection file
cf_label = QLabel(_('Connection file:'))
self.cf = QLineEdit()
self.cf.setPlaceholderText(_('Kernel connection file path'))
self.cf.setMinimumWidth(350)
cf_open_btn = QPushButton(_('Browse'))
cf_open_btn.clicked.connect(self.select_connection_file)
cf_layout = QHBoxLayout()
cf_layout.addWidget(cf_label)
cf_layout.addWidget(self.cf)
cf_layout.addWidget(cf_open_btn)
# Remote kernel groupbox
self.rm_group = QGroupBox(_("This is a remote kernel (via SSH)"))
# SSH connection
hn_label = QLabel(_('Hostname:'))
self.hn = QLineEdit()
pn_label = QLabel(_('Port:'))
self.pn = QLineEdit()
self.pn.setMaximumWidth(75)
self.pn.setText('22')
un_label = QLabel(_('Username:'******'Password:'******'SSH keyfile:'))
self.pw = QLineEdit()
self.pw.setEchoMode(QLineEdit.Password)
self.pw_radio.toggled.connect(self.pw.setEnabled)
self.kf_radio.toggled.connect(self.pw.setDisabled)
self.kf = QLineEdit()
kf_open_btn = QPushButton(_('Browse'))
kf_open_btn.clicked.connect(self.select_ssh_key)
kf_layout = QHBoxLayout()
kf_layout.addWidget(self.kf)
kf_layout.addWidget(kf_open_btn)
kfp_label = QLabel(_('Passphase:'))
self.kfp = QLineEdit()
self.kfp.setPlaceholderText(_('Optional'))
self.kfp.setEchoMode(QLineEdit.Password)
self.kf_radio.toggled.connect(self.kf.setEnabled)
self.kf_radio.toggled.connect(self.kfp.setEnabled)
self.kf_radio.toggled.connect(kf_open_btn.setEnabled)
self.kf_radio.toggled.connect(kfp_label.setEnabled)
self.pw_radio.toggled.connect(self.kf.setDisabled)
self.pw_radio.toggled.connect(self.kfp.setDisabled)
self.pw_radio.toggled.connect(kf_open_btn.setDisabled)
self.pw_radio.toggled.connect(kfp_label.setDisabled)
# SSH layout
ssh_layout = QGridLayout()
ssh_layout.addWidget(hn_label, 0, 0, 1, 2)
ssh_layout.addWidget(self.hn, 0, 2)
ssh_layout.addWidget(pn_label, 0, 3)
ssh_layout.addWidget(self.pn, 0, 4)
ssh_layout.addWidget(un_label, 1, 0, 1, 2)
ssh_layout.addWidget(self.un, 1, 2, 1, 3)
# SSH authentication layout
auth_layout = QGridLayout()
auth_layout.addWidget(self.pw_radio, 1, 0)
auth_layout.addWidget(pw_label, 1, 1)
auth_layout.addWidget(self.pw, 1, 2)
auth_layout.addWidget(self.kf_radio, 2, 0)
auth_layout.addWidget(kf_label, 2, 1)
auth_layout.addLayout(kf_layout, 2, 2)
auth_layout.addWidget(kfp_label, 3, 1)
auth_layout.addWidget(self.kfp, 3, 2)
auth_group.setLayout(auth_layout)
# Remote kernel layout
rm_layout = QVBoxLayout()
rm_layout.addLayout(ssh_layout)
rm_layout.addSpacerItem(QSpacerItem(QSpacerItem(0, 8)))
rm_layout.addWidget(auth_group)
self.rm_group.setLayout(rm_layout)
self.rm_group.setCheckable(True)
self.rm_group.setChecked(False)
self.rm_group.toggled.connect(self.pw_radio.setChecked)
# Ok and Cancel buttons
self.accept_btns = QDialogButtonBox(
QDialogButtonBox.Ok | QDialogButtonBox.Cancel,
Qt.Horizontal, self)
self.accept_btns.accepted.connect(self.accept)
self.accept_btns.rejected.connect(self.reject)
# Dialog layout
layout = QVBoxLayout(self)
layout.addWidget(main_label)
layout.addSpacerItem(QSpacerItem(QSpacerItem(0, 8)))
layout.addLayout(cf_layout)
layout.addSpacerItem(QSpacerItem(QSpacerItem(0, 12)))
layout.addWidget(self.rm_group)
layout.addWidget(self.accept_btns)
class PyChopGui(QMainWindow):
"""
GUI Class using PyQT for PyChop to help users plan inelastic neutron experiments
at spallation sources by calculating the resolution and flux at a given neutron energies.
"""
instruments = {}
choppers = {}
minE = {}
maxE = {}
def __init__(self):
super(PyChopGui, self).__init__()
self.folder = os.path.dirname(sys.modules[self.__module__].__file__)
for fname in os.listdir(self.folder):
if fname.endswith('.yaml'):
instobj = Instrument(os.path.join(self.folder, fname))
self.instruments[instobj.name] = instobj
self.choppers[instobj.name] = instobj.getChopperNames()
self.minE[instobj.name] = max([instobj.emin, 0.01])
self.maxE[instobj.name] = instobj.emax
self.drawLayout()
self.setInstrument(list(self.instruments.keys())[0])
self.resaxes_xlim = 0
self.qeaxes_xlim = 0
self.isFramePlotted = 0
def setInstrument(self, instname):
"""
Defines the instrument parameters by the name of the instrument.
"""
self.engine = self.instruments[str(instname)]
self.tabs.setTabEnabled(self.tdtabID, False)
self.widgets['ChopperCombo']['Combo'].clear()
self.widgets['FrequencyCombo']['Combo'].clear()
self.widgets['FrequencyCombo']['Label'].setText('Frequency')
self.widgets['PulseRemoverCombo']['Combo'].clear()
for item in self.choppers[str(instname)]:
self.widgets['ChopperCombo']['Combo'].addItem(item)
rep = self.engine.moderator.source_rep
maxfreq = self.engine.chopper_system.max_frequencies
# At the moment, the GUI only supports up to two independent frequencies
if not hasattr(maxfreq, '__len__') or len(maxfreq) == 1:
self.widgets['PulseRemoverCombo']['Combo'].hide()
self.widgets['PulseRemoverCombo']['Label'].hide()
for fq in range(rep, (maxfreq[0] if hasattr(maxfreq, '__len__') else maxfreq) + 1, rep):
self.widgets['FrequencyCombo']['Combo'].addItem(str(fq))
if hasattr(self.engine.chopper_system, 'frequency_names'):
self.widgets['FrequencyCombo']['Label'].setText(self.engine.chopper_system.frequency_names[0])
else:
self.widgets['PulseRemoverCombo']['Combo'].show()
self.widgets['PulseRemoverCombo']['Label'].show()
if hasattr(self.engine.chopper_system, 'frequency_names'):
for idx, chp in enumerate([self.widgets['FrequencyCombo']['Label'], self.widgets['PulseRemoverCombo']['Label']]):
chp.setText(self.engine.chopper_system.frequency_names[idx])
for fq in range(rep, maxfreq[0] + 1, rep):
self.widgets['FrequencyCombo']['Combo'].addItem(str(fq))
for fq in range(rep, maxfreq[1] + 1, rep):
self.widgets['PulseRemoverCombo']['Combo'].addItem(str(fq))
if len(self.engine.chopper_system.choppers) > 1:
self.widgets['MultiRepCheck'].setEnabled(True)
self.tabs.setTabEnabled(self.tdtabID, True)
else:
self.widgets['MultiRepCheck'].setEnabled(False)
self.widgets['MultiRepCheck'].setChecked(False)
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
if self.engine.chopper_system.isPhaseIndependent:
self.widgets['Chopper2Phase']['Edit'].show()
self.widgets['Chopper2Phase']['Label'].show()
self.widgets['Chopper2Phase']['Edit'].setText(str(self.engine.chopper_system.defaultPhase[0]))
self.widgets['Chopper2Phase']['Label'].setText(self.engine.chopper_system.phaseNames[0])
# Special case for MERLIN - hide phase control from normal users
if 'MERLIN' in str(instname) and not self.instSciAct.isChecked():
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
self.engine.setChopper(str(self.widgets['ChopperCombo']['Combo'].currentText()))
self.engine.setFrequency(float(self.widgets['FrequencyCombo']['Combo'].currentText()))
val = self.flxslder.val * self.maxE[self.engine.instname] / 100
self.flxedt.setText('%3.2f' % (val))
nframe = self.engine.moderator.n_frame if hasattr(self.engine.moderator, 'n_frame') else 1
self.repfig_nframe_edit.setText(str(nframe))
self.repfig_nframe_rep1only.setChecked(False)
if hasattr(self.engine.chopper_system, 'default_frequencies'):
cb = [self.widgets['FrequencyCombo']['Combo'], self.widgets['PulseRemoverCombo']['Combo']]
for idx, freq in enumerate(self.engine.chopper_system.default_frequencies):
cb[idx].setCurrentIndex([i for i in range(cb[idx].count()) if str(freq) in cb[idx].itemText(i)][0])
if idx > 1:
break
self.tabs.setTabEnabled(self.qetabID, False)
if self.engine.has_detector and hasattr(self.engine.detector, 'tthlims'):
self.tabs.setTabEnabled(self.qetabID, True)
def setChopper(self, choppername):
"""
Defines the Fermi chopper slit package type by name, or the disk chopper arrangement variant.
"""
self.engine.setChopper(str(choppername))
self.engine.setFrequency(float(self.widgets['FrequencyCombo']['Combo'].currentText()))
# Special case for MERLIN - only enable multirep for 'G' chopper
if 'MERLIN' in self.engine.instname:
if 'G' in str(choppername):
self.widgets['MultiRepCheck'].setEnabled(True)
self.tabs.setTabEnabled(self.tdtabID, True)
self.widgets['Chopper2Phase']['Edit'].setText('1500')
self.widgets['Chopper2Phase']['Label'].setText('Disk chopper phase delay time')
if self.instSciAct.isChecked():
self.widgets['Chopper2Phase']['Edit'].show()
self.widgets['Chopper2Phase']['Label'].show()
else:
self.widgets['MultiRepCheck'].setEnabled(False)
self.widgets['MultiRepCheck'].setChecked(False)
self.tabs.setTabEnabled(self.tdtabID, False)
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
def setFreq(self, freqtext=None, **kwargs):
"""
Sets the chopper frequency(ies), in Hz.
"""
freq_gui = float(self.widgets['FrequencyCombo']['Combo'].currentText())
freq_in = kwargs['manual_freq'] if ('manual_freq' in kwargs.keys()) else freq_gui
if len(self.engine.getFrequency()) > 1 and (not hasattr(freq_in, '__len__') or len(freq_in)==1):
freqpr = float(self.widgets['PulseRemoverCombo']['Combo'].currentText())
freq_in = [freq_in, freqpr]
if not self.widgets['Chopper2Phase']['Label'].isHidden():
chop2phase = self.widgets['Chopper2Phase']['Edit'].text()
if isinstance(self.engine.chopper_system.defaultPhase[0], string_types):
chop2phase = str(chop2phase)
else:
chop2phase = float(chop2phase) % (1e6 / self.engine.moderator.source_rep)
self.engine.setFrequency(freq_in, phase=chop2phase)
else:
self.engine.setFrequency(freq_in)
def setEi(self):
"""
Sets the incident energy (or focused incident energy for multi-rep case).
"""
try:
eitxt = float(self.widgets['EiEdit']['Edit'].text())
self.engine.setEi(eitxt)
if self.eiPlots.isChecked():
self.calc_callback()
except ValueError:
raise ValueError('No Ei specified, or Ei string not understood')
def calc_callback(self):
"""
Calls routines to calculate the resolution / flux and to update the Matplotlib graphs.
"""
try:
if self.engine.getChopper() is None:
self.setChopper(self.widgets['ChopperCombo']['Combo'].currentText())
self.setEi()
self.setFreq()
self.calculate()
if self.errormess:
idx = [i for i, ei in enumerate(self.eis) if np.abs(ei - self.engine.getEi()) < 1.e-4]
if idx and self.flux[idx[0]] == 0:
raise ValueError(self.errormess)
self.errormessage(self.errormess)
self.plot_res()
self.plot_frame()
if self.instSciAct.isChecked():
self.update_script()
except ValueError as err:
self.errormessage(err)
self.plot_flux_ei()
self.plot_flux_hz()
def calculate(self):
"""
Performs the resolution and flux calculations.
"""
self.errormess = None
if self.engine.getEi() is None:
self.setEi()
if self.widgets['MultiRepCheck'].isChecked():
en = np.linspace(0, 0.95, 200)
self.eis = self.engine.getAllowedEi()
with warnings.catch_warnings(record=True) as w:
warnings.simplefilter('always', UserWarning)
self.res = self.engine.getMultiRepResolution(en)
self.flux = self.engine.getMultiRepFlux()
if len(w) > 0:
mess = [str(w[i].message) for i in range(len(w))]
self.errormess = '\n'.join([m for m in mess if 'tchop' in m])
else:
en = np.linspace(0, 0.95*self.engine.getEi(), 200)
with warnings.catch_warnings(record=True) as w:
warnings.simplefilter('always', UserWarning)
self.res = self.engine.getResolution(en)
self.flux = self.engine.getFlux()
if len(w) > 0:
raise ValueError(w[0].message)
def _set_overplot(self, overplot, axisname):
axis = getattr(self, axisname)
if overplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
axis.hold(True)
else:
setattr(self, axisname+'_xlim', 0)
axis.clear()
axis.axhline(color='k')
def plot_res(self):
"""
Plots the resolution in the resolution tab
"""
overplot = self.widgets['HoldCheck'].isChecked()
multiplot = self.widgets['MultiRepCheck'].isChecked()
self._set_overplot(overplot, 'resaxes')
self._set_overplot(overplot, 'qeaxes')
inst = self.engine.instname
freq = self.engine.getFrequency()
if hasattr(freq, '__len__'):
freq = freq[0]
if multiplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.resaxes.hold(True)
for ie, Ei in enumerate(self.eis):
en = np.linspace(0, 0.95*Ei, 200)
if any(self.res[ie]):
if not self.flux[ie]:
continue
line, = self.resaxes.plot(en, self.res[ie])
label_text = '%s_%3.2fmeV_%dHz_Flux=%fn/cm2/s' % (inst, Ei, freq, self.flux[ie])
line.set_label(label_text)
if self.tabs.isTabEnabled(self.qetabID):
self.plot_qe(Ei, label_text, hold=True)
self.resaxes_xlim = max(Ei, self.resaxes_xlim)
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.resaxes.hold(False)
else:
ei = self.engine.getEi()
en = np.linspace(0, 0.95*ei, 200)
line, = self.resaxes.plot(en, self.res)
chopper = self.engine.getChopper()
label_text = '%s_%s_%3.2fmeV_%dHz_Flux=%fn/cm2/s' % (inst, chopper, ei, freq, self.flux)
line.set_label(label_text)
if self.tabs.isTabEnabled(self.qetabID):
self.plot_qe(ei, label_text, overplot)
self.resaxes_xlim = max(ei, self.resaxes_xlim)
self.resaxes.set_xlim([0, self.resaxes_xlim])
self.resaxes.legend().draggable()
self.resaxes.set_xlabel('Energy Transfer (meV)')
self.resaxes.set_ylabel(r'$\Delta$E (meV FWHM)')
self.rescanvas.draw()
def plot_qe(self, Ei, label_text, hold=False):
""" Plots the Q-E diagram """
from scipy import constants
E2q, meV2J = (2. * constants.m_n / (constants.hbar ** 2), constants.e / 1000.)
en = np.linspace(-Ei / 5., Ei, 100)
q2 = []
for tth in self.engine.detector.tthlims:
q = np.sqrt(E2q * (2 * Ei - en - 2 * np.sqrt(Ei * (Ei - en)) * np.cos(np.deg2rad(tth))) * meV2J) / 1e10
q2.append(np.concatenate((np.flipud(q), q)))
self._set_overplot(hold, 'qeaxes')
self.qeaxes_xlim = max(np.max(q2), self.qeaxes_xlim)
line, = self.qeaxes.plot(np.hstack(q2), np.concatenate((np.flipud(en), en)).tolist() * len(self.engine.detector.tthlims))
line.set_label(label_text)
self.qeaxes.set_xlim([0, self.qeaxes_xlim])
self.qeaxes.legend().draggable()
self.qeaxes.set_xlabel(r'$|Q| (\mathrm{\AA}^{-1})$')
self.qeaxes.set_ylabel('Energy Transfer (meV)')
self.qecanvas.draw()
def plot_flux_ei(self, **kwargs):
"""
Plots the flux vs Ei in the middle tab
"""
inst = self.engine.instname
chop = self.engine.getChopper()
freq = self.engine.getFrequency()
overplot = self.widgets['HoldCheck'].isChecked()
if hasattr(freq, '__len__'):
freq = freq[0]
update = kwargs['update'] if 'update' in kwargs.keys() else False
# Do not recalculate if all relevant parameters still the same.
_, labels = self.flxaxes2.get_legend_handles_labels()
searchStr = '([A-Z]+) "(.+)" ([0-9]+) Hz'
tmpinst = []
if (labels and (overplot or len(labels) == 1)) or update:
for prevtitle in labels:
prevInst, prevChop, prevFreq = re.search(searchStr, prevtitle).groups()
if update:
tmpinst.append(copy.deepcopy(Instrument(self.instruments[prevInst], prevChop, float(prevFreq))))
else:
if inst == prevInst and chop == prevChop and freq == float(prevFreq):
return
ne = 25
mn = self.minE[inst]
mx = (self.flxslder.val/100)*self.maxE[inst]
eis = np.linspace(mn, mx, ne)
flux = eis*0
elres = eis*0
if update:
self.flxaxes1.clear()
self.flxaxes2.clear()
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.flxaxes1.hold(True)
self.flxaxes2.hold(True)
for ii, instrument in enumerate(tmpinst):
for ie, ei in enumerate(eis):
with warnings.catch_warnings(record=True):
warnings.simplefilter('always', UserWarning)
flux[ie] = instrument.getFlux(ei)
elres[ie] = instrument.getResolution(0., ei)[0]
self.flxaxes1.plot(eis, flux)
line, = self.flxaxes2.plot(eis, elres)
line.set_label(labels[ii])
else:
for ie, ei in enumerate(eis):
with warnings.catch_warnings(record=True):
warnings.simplefilter('always', UserWarning)
flux[ie] = self.engine.getFlux(ei)
elres[ie] = self.engine.getResolution(0., ei)[0]
if overplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.flxaxes1.hold(True)
self.flxaxes2.hold(True)
else:
self.flxaxes1.clear()
self.flxaxes2.clear()
self.flxaxes1.plot(eis, flux)
line, = self.flxaxes2.plot(eis, elres)
line.set_label('%s "%s" %d Hz' % (inst, chop, freq))
self.flxaxes1.set_xlim([mn, mx])
self.flxaxes2.set_xlim([mn, mx])
self.flxaxes1.set_xlabel('Incident Energy (meV)')
self.flxaxes1.set_ylabel('Flux (n/cm$^2$/s)')
self.flxaxes1.set_xlabel('Incident Energy (meV)')
self.flxaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
lg = self.flxaxes2.legend()
lg.draggable()
self.flxcanvas.draw()
def update_slider(self, val=None):
"""
Callback function for the x-axis slider of the flux tab
"""
if val is None:
val = float(self.flxedt.text()) / self.maxE[self.engine.instname] * 100
if val < self.minE[self.engine.instname]:
self.errormessage("Max Ei must be greater than %2.1f" % (self.minE[self.engine.instname]))
val = (self.minE[self.engine.instname]+0.1) / self.maxE[self.engine.instname] * 100
self.flxslder.set_val(val)
else:
val = self.flxslder.val * self.maxE[self.engine.instname] / 100
self.flxedt.setText('%3.2f' % (val))
self.plot_flux_ei(update=True)
self.flxcanvas.draw()
def plot_flux_hz(self):
"""
Plots the flux vs freq in the middle tab
"""
inst = self.engine.instname
chop = self.engine.getChopper()
ei = float(self.widgets['EiEdit']['Edit'].text())
overplot = self.widgets['HoldCheck'].isChecked()
# Do not recalculate if one of the plots has the same parametersc
_, labels = self.frqaxes2.get_legend_handles_labels()
searchStr = '([A-Z]+) "(.+)" Ei = ([0-9.-]+) meV'
if labels and (overplot or len(labels) == 1):
for prevtitle in labels:
prevInst, prevChop, prevEi = re.search(searchStr, prevtitle).groups()
if inst == prevInst and chop == prevChop and abs(ei-float(prevEi)) < 0.01:
return
freq0 = self.engine.getFrequency()
rep = self.engine.moderator.source_rep
maxfreq = self.engine.chopper_system.max_frequencies
freqs = range(rep, (maxfreq[0] if hasattr(maxfreq, '__len__') else maxfreq) + 1, rep)
flux = np.zeros(len(freqs))
elres = np.zeros(len(freqs))
for ie, freq in enumerate(freqs):
if hasattr(freq0, '__len__'):
self.setFreq(manual_freq=[freq] + freq0[1:])
else:
self.setFreq(manual_freq=freq)
with warnings.catch_warnings(record=True):
warnings.simplefilter('always', UserWarning)
flux[ie] = self.engine.getFlux(ei)
elres[ie] = self.engine.getResolution(0., ei)[0]
if overplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.frqaxes1.hold(True)
self.frqaxes2.hold(True)
else:
self.frqaxes1.clear()
self.frqaxes2.clear()
self.setFreq(manual_freq=freq0)
self.frqaxes1.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes1.set_ylabel('Flux (n/cm$^2$/s)')
line, = self.frqaxes1.plot(freqs, flux, 'o-')
self.frqaxes1.set_xlim([0, np.max(freqs)])
self.frqaxes2.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
line, = self.frqaxes2.plot(freqs, elres, 'o-')
line.set_label('%s "%s" Ei = %5.3f meV' % (inst, chop, ei))
lg = self.frqaxes2.legend()
lg.draggable()
self.frqaxes2.set_xlim([0, np.max(freqs)])
self.frqcanvas.draw()
def instSciCB(self):
"""
Callback function for the "Instrument Scientist Mode" menu option
"""
# MERLIN is a special case - want to hide ability to change phase from users
if 'MERLIN' in self.engine.instname and 'G' in self.engine.getChopper():
if self.instSciAct.isChecked():
self.widgets['Chopper2Phase']['Edit'].show()
self.widgets['Chopper2Phase']['Label'].show()
self.widgets['Chopper2Phase']['Edit'].setText('1500')
self.widgets['Chopper2Phase']['Label'].setText('Disk chopper phase delay time')
else:
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
if self.instSciAct.isChecked():
self.tabs.insertTab(self.scrtabID, self.scrtab, 'ScriptOutput')
self.scrtab.show()
else:
self.tabs.removeTab(self.scrtabID)
self.scrtab.hide()
def errormessage(self, message):
msg = QMessageBox()
msg.setText(str(message))
msg.setStandardButtons(QMessageBox.Ok)
msg.exec_()
def loadYaml(self):
yaml_file = QFileDialog().getOpenFileName(self.mainWidget, 'Open Instrument YAML File', self.folder, 'Files (*.yaml)')
if isinstance(yaml_file, tuple):
yaml_file = yaml_file[0]
yaml_file = str(yaml_file)
new_folder = os.path.dirname(yaml_file)
if new_folder != self.folder:
self.folder = new_folder
try:
new_inst = Instrument(yaml_file)
except (RuntimeError, AttributeError, ValueError) as err:
self.errormessage(err)
newname = new_inst.name
if newname in self.instruments.keys() and not self.overwriteload.isChecked():
overwrite, newname = self._ask_overwrite()
if overwrite == 1:
return
elif overwrite == 0:
newname = new_inst.name
self.instruments[newname] = new_inst
self.choppers[newname] = new_inst.getChopperNames()
self.minE[newname] = max([new_inst.emin, 0.01])
self.maxE[newname] = new_inst.emax
self.updateInstrumentList()
combo = self.widgets['InstrumentCombo']['Combo']
idx = [i for i in range(combo.count()) if str(combo.itemText(i)) == newname]
combo.setCurrentIndex(idx[0])
self.setInstrument(newname)
def _ask_overwrite(self):
msg = QDialog()
msg.setWindowTitle('Load overwrite')
layout = QGridLayout()
layout.addWidget(QLabel('Instrument %s already exists in memory. Overwrite this?'), 0, 0, 1, -1)
buttons = [QPushButton(label) for label in ['Load and overwrite', 'Cancel Load', 'Load and rename to']]
locations = [[1, 0], [1, 1], [2, 0]]
self.overwrite_flag = 1
def overwriteCB(idx):
self.overwrite_flag = idx
msg.accept()
for idx, button in enumerate(buttons):
button.clicked.connect(lambda _, idx=idx: overwriteCB(idx))
layout.addWidget(button, locations[idx][0], locations[idx][1])
newname = QLineEdit()
newname.editingFinished.connect(lambda: overwriteCB(2))
layout.addWidget(newname, 2, 1)
msg.setLayout(layout)
msg.exec_()
newname = str(newname.text())
if not newname or newname in self.instruments:
self.errormessage('Invalid instrument name. Cancelling load.')
self.overwrite_flag = 1
return self.overwrite_flag, newname
def updateInstrumentList(self):
combo = self.widgets['InstrumentCombo']['Combo']
old_instruments = [str(combo.itemText(i)) for i in range(combo.count())]
new_instruments = [inst for inst in self.instruments if inst not in old_instruments]
for inst in new_instruments:
combo.addItem(inst)
def plot_frame(self):
"""
Plots the distance-time diagram in the right tab
"""
if len(self.engine.chopper_system.choppers) > 1:
self.engine.n_frame = int(self.repfig_nframe_edit.text())
self.repaxes.clear()
self.engine.plotMultiRepFrame(self.repaxes, first_rep=self.repfig_nframe_rep1only.isChecked())
self.repcanvas.draw()
def _gen_text_ei(self, ei, obj_in):
obj = Instrument(obj_in)
obj.setEi(ei)
en = np.linspace(0, 0.95*ei, 10)
try:
flux = self.engine.getFlux()
res = self.engine.getResolution(en)
except ValueError as err:
self.errormessage(err)
raise ValueError(err)
tsqvan, tsqdic, tsqmodchop = obj.getVanVar()
v_mod, v_chop = tuple(np.sqrt(tsqmodchop[:2]) * 1e6)
x0, _, x1, x2, _ = obj.chopper_system.getDistances()
first_component = 'moderator'
if x0 != tsqmodchop[2]:
x0 = tsqmodchop[2]
first_component = 'chopper 1'
txt = '# ------------------------------------------------------------- #\n'
txt += '# Ei = %8.2f meV\n' % (ei)
txt += '# Flux = %8.2f n/cm2/s\n' % (flux)
txt += '# Elastic resolution = %6.2f meV\n' % (res[0])
txt += '# Time width at sample = %6.2f us, of which:\n' % (1e6*np.sqrt(tsqvan))
for ky, val in list(tsqdic.items()):
txt += '# %20s : %6.2f us\n' % (ky, 1e6*np.sqrt(val))
txt += '# %s distances:\n' % (obj.instname)
txt += '# x0 = %6.2f m (%s to Fermi)\n' % (x0, first_component)
txt += '# x1 = %6.2f m (Fermi to sample)\n' % (x1)
txt += '# x2 = %6.2f m (sample to detector)\n' % (x2)
txt += '# Approximate inelastic resolution is given by:\n'
txt += '# dE = 2 * E2V * sqrt(ef**3 * t_van**2) / x2\n'
txt += '# where: E2V = 4.373e-4 meV/(m/us) conversion from energy to speed\n'
txt += '# t_van**2 = (geom*t_mod)**2 + ((1+geom)*t_chop)**2\n'
txt += '# geom = (x1 + x2*(ei/ef)**1.5) / x0\n'
txt += '# and t_mod and t_chop are the moderator and chopper time widths at the\n'
txt += '# moderator and chopper positions (not at the sample as listed above).\n'
txt += '# Which in this case is:\n'
txt += '# %.4e*sqrt(ef**3 * ( (%6.5f*(%.3f+%.3f*(ei/ef)**1.5))**2 \n' % (874.78672e-6/x2, v_mod, x1/x0, x2/x0)
txt += '# + (%6.5f*(%.3f+%.3f*(ei/ef)**1.5))**2) )\n' % (v_chop, 1+x1/x0, x2/x0)
txt += '# EN (meV) Full dE (meV) Approx dE (meV)\n'
for ii in range(len(res)):
ef = ei-en[ii]
approx = (874.78672e-6/x2)*np.sqrt(ef**3 * ((v_mod*((x1/x0)+(x2/x0)*(ei/ef)**1.5))**2
+ (v_chop*(1+(x1/x0)+(x2/x0)*(ei/ef)**1.5))**2))
txt += '%12.5f %12.5f %12.5f\n' % (en[ii], res[ii], approx)
return txt
def genText(self):
"""
Generates text output of the resolution function versus energy transfer and other information.
"""
multiplot = self.widgets['MultiRepCheck'].isChecked()
obj = self.engine
if obj.getChopper() is None:
self.setChopper(self.widgets['ChopperCombo']['Combo'].currentText())
if obj.getEi() is None:
self.setEi()
instname, chtyp, freqs, ei_in = tuple([obj.instname, obj.getChopper(), obj.getFrequency(), obj.getEi()])
txt = '# ------------------------------------------------------------- #\n'
txt += '# Chop calculation for instrument %s\n' % (instname)
if obj.isFermi:
txt += '# with chopper %s at %3i Hz\n' % (chtyp, freqs[0])
else:
txt += '# in %s mode with:\n' % (chtyp)
freq_names = obj.chopper_system.frequency_names
for idx in range(len(freq_names)):
txt += '# %s at %3i Hz\n' % (freq_names[idx], freqs[idx])
txt += self._gen_text_ei(ei_in, obj)
if multiplot:
for ei in sorted(self.engine.getAllowedEi()):
if np.abs(ei - ei_in) > 0.001:
txt += self._gen_text_ei(ei, obj)
return txt
def showText(self):
"""
Creates a dialog to show the generated text output.
"""
try:
generatedText = self.genText()
except ValueError:
return
self.txtwin = QDialog()
self.txtedt = QTextEdit()
self.txtbtn = QPushButton('OK')
self.txtwin.layout = QVBoxLayout(self.txtwin)
self.txtwin.layout.addWidget(self.txtedt)
self.txtwin.layout.addWidget(self.txtbtn)
self.txtbtn.clicked.connect(self.txtwin.deleteLater)
self.txtedt.setText(generatedText)
self.txtedt.setReadOnly(True)
self.txtwin.setWindowTitle('Resolution information')
self.txtwin.setWindowModality(Qt.ApplicationModal)
self.txtwin.setAttribute(Qt.WA_DeleteOnClose)
self.txtwin.setMinimumSize(400, 600)
self.txtwin.resize(400, 600)
self.txtwin.show()
self.txtloop = QEventLoop()
self.txtloop.exec_()
def saveText(self):
"""
Saves the generated text to a file (opens file dialog).
"""
fname = QFileDialog.getSaveFileName(self, 'Open file', '')
if isinstance(fname, tuple):
fname = fname[0]
fid = open(fname, 'w')
fid.write(self.genText())
fid.close()
def update_script(self):
"""
Updates the text window with information about the previous calculation.
"""
if self.widgets['MultiRepCheck'].isChecked():
out = self.engine.getMultiWidths()
new_str = '\n'
for ie, ee in enumerate(out['Eis']):
res = out['Energy'][ie]
percent = res / ee * 100
chop_width = out['chopper'][ie]
mod_width = out['moderator'][ie]
new_str += 'Ei is %6.2f meV, resolution is %6.2f ueV, percentage resolution is %6.3f\n' % (ee, res * 1000, percent)
new_str += 'FWHM at sample from chopper and moderator are %6.2f us, %6.2f us\n' % (chop_width, mod_width)
else:
ei = self.engine.getEi()
out = self.engine.getWidths()
res = out['Energy']
percent = res / ei * 100
chop_width = out['chopper']
mod_width = out['moderator']
new_str = '\nEi is %6.2f meV, resolution is %6.2f ueV, percentage resolution is %6.3f\n' % (ei, res * 1000, percent)
new_str += 'FWHM at sample from chopper and moderator are %6.2f us, %6.2f us\n' % (chop_width, mod_width)
self.scredt.append(new_str)
def onHelp(self):
"""
Shows the help page
"""
try:
from pymantidplot.proxies import showCustomInterfaceHelp
showCustomInterfaceHelp("PyChop")
except ImportError:
helpTxt = "PyChop is a tool to allow direct inelastic neutron\nscattering users to estimate the inelastic resolution\n"
helpTxt += "and incident flux for a given spectrometer setting.\n\nFirst select the instrument, chopper settings and\n"
helpTxt += "Ei, and then click 'Calculate and Plot'. Data for all\nthe graphs will be generated (may take 1-2s) and\n"
helpTxt += "all graphs will be updated. If the 'Hold current plot'\ncheck box is ticked, additional settings will be\n"
helpTxt += "overplotted on the existing graphs if they are\ndifferent from previous settings.\n\nMore in-depth help "
helpTxt += "can be obtained from the\nMantid help pages."
self.hlpwin = QDialog()
self.hlpedt = QLabel(helpTxt)
self.hlpbtn = QPushButton('OK')
self.hlpwin.layout = QVBoxLayout(self.hlpwin)
self.hlpwin.layout.addWidget(self.hlpedt)
self.hlpwin.layout.addWidget(self.hlpbtn)
self.hlpbtn.clicked.connect(self.hlpwin.deleteLater)
self.hlpwin.setWindowTitle('Help')
self.hlpwin.setWindowModality(Qt.ApplicationModal)
self.hlpwin.setAttribute(Qt.WA_DeleteOnClose)
self.hlpwin.setMinimumSize(370, 300)
self.hlpwin.resize(370, 300)
self.hlpwin.show()
self.hlploop = QEventLoop()
self.hlploop.exec_()
def drawLayout(self):
"""
Draws the GUI layout.
"""
self.widgetslist = [
['pair', 'show', 'Instrument', 'combo', self.instruments, self.setInstrument, 'InstrumentCombo'],
['pair', 'show', 'Chopper', 'combo', '', self.setChopper, 'ChopperCombo'],
['pair', 'show', 'Frequency', 'combo', '', self.setFreq, 'FrequencyCombo'],
['pair', 'hide', 'Pulse remover chopper freq', 'combo', '', self.setFreq, 'PulseRemoverCombo'],
['pair', 'show', 'Ei', 'edit', '', self.setEi, 'EiEdit'],
['pair', 'hide', 'Chopper 2 phase delay time', 'edit', '5', self.setFreq, 'Chopper2Phase'],
['spacer'],
['single', 'show', 'Calculate and Plot', 'button', self.calc_callback, 'CalculateButton'],
['single', 'show', 'Hold current plot', 'check', lambda: None, 'HoldCheck'],
['single', 'show', 'Show multi-reps', 'check', lambda: None, 'MultiRepCheck'],
['spacer'],
['single', 'show', 'Show data ascii window', 'button', self.showText, 'ShowAsciiButton'],
['single', 'show', 'Save data as ascii', 'button', self.saveText, 'SaveAsciiButton']
]
self.droplabels = []
self.dropboxes = []
self.singles = []
self.widgets = {}
self.leftPanel = QVBoxLayout()
self.rightPanel = QVBoxLayout()
self.tabs = QTabWidget(self)
self.fullWindow = QGridLayout()
for widget in self.widgetslist:
if 'pair' in widget[0]:
self.droplabels.append(QLabel(widget[2]))
if 'combo' in widget[3]:
self.dropboxes.append(QComboBox(self))
self.dropboxes[-1].activated['QString'].connect(widget[5])
for item in widget[4]:
self.dropboxes[-1].addItem(item)
self.widgets[widget[-1]] = {'Combo':self.dropboxes[-1], 'Label':self.droplabels[-1]}
elif 'edit' in widget[3]:
self.dropboxes.append(QLineEdit(self))
self.dropboxes[-1].returnPressed.connect(widget[5])
self.widgets[widget[-1]] = {'Edit':self.dropboxes[-1], 'Label':self.droplabels[-1]}
else:
raise RuntimeError('Bug in code - widget %s is not recognised.' % (widget[3]))
self.leftPanel.addWidget(self.droplabels[-1])
self.leftPanel.addWidget(self.dropboxes[-1])
if 'hide' in widget[1]:
self.droplabels[-1].hide()
self.dropboxes[-1].hide()
elif 'single' in widget[0]:
if 'check' in widget[3]:
self.singles.append(QCheckBox(widget[2], self))
self.singles[-1].stateChanged.connect(widget[4])
elif 'button' in widget[3]:
self.singles.append(QPushButton(widget[2]))
self.singles[-1].clicked.connect(widget[4])
else:
raise RuntimeError('Bug in code - widget %s is not recognised.' % (widget[3]))
self.leftPanel.addWidget(self.singles[-1])
if 'hide' in widget[1]:
self.singles[-1].hide()
self.widgets[widget[-1]] = self.singles[-1]
elif 'spacer' in widget[0]:
self.leftPanel.addItem(QSpacerItem(0, 35))
else:
raise RuntimeError('Bug in code - widget class %s is not recognised.' % (widget[0]))
# Right panel, matplotlib figures
self.resfig = Figure()
self.resfig.patch.set_facecolor('white')
self.rescanvas = FigureCanvas(self.resfig)
self.resaxes = self.resfig.add_subplot(111)
self.resaxes.axhline(color='k')
self.resaxes.set_xlabel('Energy Transfer (meV)')
self.resaxes.set_ylabel(r'$\Delta$E (meV FWHM)')
self.resfig_controls = NavigationToolbar(self.rescanvas, self)
self.restab = QWidget(self.tabs)
self.restabbox = QVBoxLayout()
self.restabbox.addWidget(self.rescanvas)
self.restabbox.addWidget(self.resfig_controls)
self.restab.setLayout(self.restabbox)
self.flxfig = Figure()
self.flxfig.patch.set_facecolor('white')
self.flxcanvas = FigureCanvas(self.flxfig)
self.flxaxes1 = self.flxfig.add_subplot(121)
self.flxaxes1.set_xlabel('Incident Energy (meV)')
self.flxaxes1.set_ylabel('Flux (n/cm$^2$/s)')
self.flxaxes2 = self.flxfig.add_subplot(122)
self.flxaxes2.set_xlabel('Incident Energy (meV)')
self.flxaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
self.flxfig_controls = NavigationToolbar(self.flxcanvas, self)
self.flxsldfg = Figure()
self.flxsldfg.patch.set_facecolor('white')
self.flxsldcv = FigureCanvas(self.flxsldfg)
self.flxsldax = self.flxsldfg.add_subplot(111)
self.flxslder = Slider(self.flxsldax, 'Ei (meV)', 0, 100, valinit=100)
self.flxslder.valtext.set_visible(False)
self.flxslder.on_changed(self.update_slider)
self.flxedt = QLineEdit()
self.flxedt.setText('1000')
self.flxedt.returnPressed.connect(self.update_slider)
self.flxtab = QWidget(self.tabs)
self.flxsldbox = QHBoxLayout()
self.flxsldbox.addWidget(self.flxsldcv)
self.flxsldbox.addWidget(self.flxedt)
self.flxsldwdg = QWidget()
self.flxsldwdg.setLayout(self.flxsldbox)
sz = self.flxsldwdg.maximumSize()
sz.setHeight(50)
self.flxsldwdg.setMaximumSize(sz)
self.flxtabbox = QVBoxLayout()
self.flxtabbox.addWidget(self.flxcanvas)
self.flxtabbox.addWidget(self.flxsldwdg)
self.flxtabbox.addWidget(self.flxfig_controls)
self.flxtab.setLayout(self.flxtabbox)
self.frqfig = Figure()
self.frqfig.patch.set_facecolor('white')
self.frqcanvas = FigureCanvas(self.frqfig)
self.frqaxes1 = self.frqfig.add_subplot(121)
self.frqaxes1.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes1.set_ylabel('Flux (n/cm$^2$/s)')
self.frqaxes2 = self.frqfig.add_subplot(122)
self.frqaxes1.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
self.frqfig_controls = NavigationToolbar(self.frqcanvas, self)
self.frqtab = QWidget(self.tabs)
self.frqtabbox = QVBoxLayout()
self.frqtabbox.addWidget(self.frqcanvas)
self.frqtabbox.addWidget(self.frqfig_controls)
self.frqtab.setLayout(self.frqtabbox)
self.repfig = Figure()
self.repfig.patch.set_facecolor('white')
self.repcanvas = FigureCanvas(self.repfig)
self.repaxes = self.repfig.add_subplot(111)
self.repaxes.axhline(color='k')
self.repaxes.set_xlabel(r'TOF ($\mu$sec)')
self.repaxes.set_ylabel('Distance (m)')
self.repfig_controls = NavigationToolbar(self.repcanvas, self)
self.repfig_nframe_label = QLabel('Number of frames to plot')
self.repfig_nframe_edit = QLineEdit('1')
self.repfig_nframe_button = QPushButton('Replot')
self.repfig_nframe_button.clicked.connect(lambda: self.plot_frame())
self.repfig_nframe_rep1only = QCheckBox('First Rep Only')
self.repfig_nframe_box = QHBoxLayout()
self.repfig_nframe_box.addWidget(self.repfig_nframe_label)
self.repfig_nframe_box.addWidget(self.repfig_nframe_edit)
self.repfig_nframe_box.addWidget(self.repfig_nframe_button)
self.repfig_nframe_box.addWidget(self.repfig_nframe_rep1only)
self.reptab = QWidget(self.tabs)
self.repfig_nframe = QWidget(self.reptab)
self.repfig_nframe.setLayout(self.repfig_nframe_box)
self.repfig_nframe.setSizePolicy(QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed))
self.reptabbox = QVBoxLayout()
self.reptabbox.addWidget(self.repcanvas)
self.reptabbox.addWidget(self.repfig_nframe)
self.reptabbox.addWidget(self.repfig_controls)
self.reptab.setLayout(self.reptabbox)
self.qefig = Figure()
self.qefig.patch.set_facecolor('white')
self.qecanvas = FigureCanvas(self.qefig)
self.qeaxes = self.qefig.add_subplot(111)
self.qeaxes.axhline(color='k')
self.qeaxes.set_xlabel(r'$|Q| (\mathrm{\AA}^{-1})$')
self.qeaxes.set_ylabel('Energy Transfer (meV)')
self.qefig_controls = NavigationToolbar(self.qecanvas, self)
self.qetabbox = QVBoxLayout()
self.qetabbox.addWidget(self.qecanvas)
self.qetabbox.addWidget(self.qefig_controls)
self.qetab = QWidget(self.tabs)
self.qetab.setLayout(self.qetabbox)
self.scrtab = QWidget(self.tabs)
self.scredt = QTextEdit()
self.scrcls = QPushButton("Clear")
self.scrcls.clicked.connect(lambda: self.scredt.clear())
self.scrbox = QVBoxLayout()
self.scrbox.addWidget(self.scredt)
self.scrbox.addWidget(self.scrcls)
self.scrtab.setLayout(self.scrbox)
self.scrtab.hide()
self.tabs.addTab(self.restab, 'Resolution')
self.tabs.addTab(self.flxtab, 'Flux-Ei')
self.tabs.addTab(self.frqtab, 'Flux-Freq')
self.tabs.addTab(self.reptab, 'Time-Distance')
self.tdtabID = 3
self.tabs.setTabEnabled(self.tdtabID, False)
self.tabs.addTab(self.qetab, 'Q-E')
self.qetabID = 4
self.tabs.setTabEnabled(self.qetabID, False)
self.scrtabID = 5
self.rightPanel.addWidget(self.tabs)
self.menuLoad = QMenu('Load')
self.loadAct = QAction('Load YAML', self.menuLoad)
self.loadAct.triggered.connect(self.loadYaml)
self.menuLoad.addAction(self.loadAct)
self.menuOptions = QMenu('Options')
self.instSciAct = QAction('Instrument Scientist Mode', self.menuOptions, checkable=True)
self.instSciAct.triggered.connect(self.instSciCB)
self.menuOptions.addAction(self.instSciAct)
self.eiPlots = QAction('Press Enter in Ei box updates plots', self.menuOptions, checkable=True)
self.menuOptions.addAction(self.eiPlots)
self.overwriteload = QAction('Always overwrite instruments in memory', self.menuOptions, checkable=True)
self.menuOptions.addAction(self.overwriteload)
self.menuBar().addMenu(self.menuLoad)
self.menuBar().addMenu(self.menuOptions)
self.leftPanelWidget = QWidget()
self.leftPanelWidget.setLayout(self.leftPanel)
self.leftPanelWidget.setSizePolicy(QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Preferred))
self.fullWindow.addWidget(self.leftPanelWidget, 0, 0)
self.fullWindow.addLayout(self.rightPanel, 0, 1)
self.helpbtn = QPushButton("?", self)
self.helpbtn.setMaximumWidth(30)
self.helpbtn.clicked.connect(self.onHelp)
self.fullWindow.addWidget(self.helpbtn, 1, 0, 1, -1)
self.mainWidget = QWidget()
self.mainWidget.setLayout(self.fullWindow)
self.setCentralWidget(self.mainWidget)
self.setWindowTitle('PyChopGUI')
self.show()
def __init__(self, parent=None):
QWidget.__init__(self, parent)
self.current_radio = None
self.dedicated_radio = None
self.systerm_radio = None
self.runconf = RunConfiguration()
firstrun_o = CONF.get("run", ALWAYS_OPEN_FIRST_RUN_OPTION, False)
# --- General settings ----
common_group = QGroupBox(_("General settings"))
common_layout = QGridLayout()
common_group.setLayout(common_layout)
self.clo_cb = QCheckBox(_("Command line options:"))
common_layout.addWidget(self.clo_cb, 0, 0)
self.clo_edit = QLineEdit()
self.clo_cb.toggled.connect(self.clo_edit.setEnabled)
self.clo_edit.setEnabled(False)
common_layout.addWidget(self.clo_edit, 0, 1)
self.wd_cb = QCheckBox(_("Working directory:"))
common_layout.addWidget(self.wd_cb, 1, 0)
wd_layout = QHBoxLayout()
self.wd_edit = QLineEdit()
self.wd_cb.toggled.connect(self.wd_edit.setEnabled)
self.wd_edit.setEnabled(False)
wd_layout.addWidget(self.wd_edit)
browse_btn = QPushButton(ima.icon("DirOpenIcon"), "", self)
browse_btn.setToolTip(_("Select directory"))
browse_btn.clicked.connect(self.select_directory)
wd_layout.addWidget(browse_btn)
common_layout.addLayout(wd_layout, 1, 1)
self.post_mortem_cb = QCheckBox(_("Enter debugging mode when " "errors appear during execution"))
common_layout.addWidget(self.post_mortem_cb)
# --- Interpreter ---
interpreter_group = QGroupBox(_("Console"))
interpreter_layout = QVBoxLayout()
interpreter_group.setLayout(interpreter_layout)
self.current_radio = QRadioButton(CURRENT_INTERPRETER)
interpreter_layout.addWidget(self.current_radio)
self.dedicated_radio = QRadioButton(DEDICATED_INTERPRETER)
interpreter_layout.addWidget(self.dedicated_radio)
self.systerm_radio = QRadioButton(SYSTERM_INTERPRETER)
interpreter_layout.addWidget(self.systerm_radio)
# --- Dedicated interpreter ---
new_group = QGroupBox(_("Dedicated Python console"))
self.current_radio.toggled.connect(new_group.setDisabled)
new_layout = QGridLayout()
new_group.setLayout(new_layout)
self.interact_cb = QCheckBox(_("Interact with the Python " "console after execution"))
new_layout.addWidget(self.interact_cb, 1, 0, 1, -1)
self.show_kill_warning_cb = QCheckBox(_("Show warning when killing" " running process"))
new_layout.addWidget(self.show_kill_warning_cb, 2, 0, 1, -1)
self.pclo_cb = QCheckBox(_("Command line options:"))
new_layout.addWidget(self.pclo_cb, 3, 0)
self.pclo_edit = QLineEdit()
self.pclo_cb.toggled.connect(self.pclo_edit.setEnabled)
self.pclo_edit.setEnabled(False)
self.pclo_edit.setToolTip(_("<b>-u</b> is added to the " "other options you set here"))
new_layout.addWidget(self.pclo_edit, 3, 1)
# Checkbox to preserve the old behavior, i.e. always open the dialog
# on first run
hline = QFrame()
hline.setFrameShape(QFrame.HLine)
hline.setFrameShadow(QFrame.Sunken)
self.firstrun_cb = QCheckBox(ALWAYS_OPEN_FIRST_RUN % _("this dialog"))
self.firstrun_cb.clicked.connect(self.set_firstrun_o)
self.firstrun_cb.setChecked(firstrun_o)
layout = QVBoxLayout()
layout.addWidget(interpreter_group)
layout.addWidget(common_group)
layout.addWidget(new_group)
layout.addWidget(hline)
layout.addWidget(self.firstrun_cb)
self.setLayout(layout)
def setup_page(self):
newcb = self.create_checkbox
# --- Introspection ---
# Basic features group
basic_features_group = QGroupBox(_("Basic features"))
completion_box = newcb(_("Enable code completion"), 'code_completion')
goto_definition_box = newcb(
_("Enable Go to definition"),
'jedi_definition',
tip=_("If this option is enabled, left-clicking on\n"
"an object name while pressing the {} key will go to\n"
"that object's definition (if resolved).".format(self.CTRL)))
follow_imports_box = newcb(_("Follow imports when going to a "
"definition"),
'jedi_definition/follow_imports')
show_signature_box = newcb(_("Show calltips"), 'jedi_signature_help')
basic_features_layout = QVBoxLayout()
basic_features_layout.addWidget(completion_box)
basic_features_layout.addWidget(goto_definition_box)
basic_features_layout.addWidget(follow_imports_box)
basic_features_layout.addWidget(show_signature_box)
basic_features_group.setLayout(basic_features_layout)
# Advanced group
advanced_group = QGroupBox(_("Advanced"))
modules_textedit = self.create_textedit(
_("Preload the following modules to make completion faster "
"and more accurate:"),
'preload_modules'
)
if is_dark_interface():
modules_textedit.textbox.setStyleSheet(
"border: 1px solid #32414B;"
)
advanced_layout = QVBoxLayout()
advanced_layout.addWidget(modules_textedit)
advanced_group.setLayout(advanced_layout)
# --- Linting ---
# Linting options
linting_label = QLabel(_("Spyder can optionally highlight syntax "
"errors and possible problems with your "
"code in the editor."))
linting_label.setOpenExternalLinks(True)
linting_label.setWordWrap(True)
linting_check = self.create_checkbox(
_("Enable basic linting"),
'pyflakes')
linting_complexity_box = self.create_checkbox(
_("Enable complexity linting with "
"the Mccabe package"), 'mccabe')
# Linting layout
linting_layout = QVBoxLayout()
linting_layout.addWidget(linting_label)
linting_layout.addWidget(linting_check)
linting_layout.addWidget(linting_complexity_box)
linting_widget = QWidget()
linting_widget.setLayout(linting_layout)
# --- Code style tab ---
# Code style label
pep_url = (
'<a href="https://www.python.org/dev/peps/pep-0008">PEP 8</a>')
code_style_codes_url = _(
"<a href='http://pycodestyle.pycqa.org/en/stable"
"/intro.html#error-codes'>pycodestyle error codes</a>")
code_style_label = QLabel(
_("Spyder can use pycodestyle to analyze your code for "
"conformance to the {} convention. You can also "
"manually show or hide specific warnings by their "
"{}.").format(pep_url, code_style_codes_url))
code_style_label.setOpenExternalLinks(True)
code_style_label.setWordWrap(True)
# Code style checkbox
code_style_check = self.create_checkbox(
_("Enable code style linting"),
'pycodestyle')
# Code style options
self.code_style_filenames_match = self.create_lineedit(
_("Only check filenames matching these patterns:"),
'pycodestyle/filename', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Check Python files: *.py"))
self.code_style_exclude = self.create_lineedit(
_("Exclude files or directories matching these patterns:"),
'pycodestyle/exclude', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Exclude all test files: (?!test_).*\\.py"))
code_style_select = self.create_lineedit(
_("Show the following errors or warnings:").format(
code_style_codes_url),
'pycodestyle/select', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Example codes: E113, W391"))
code_style_ignore = self.create_lineedit(
_("Ignore the following errors or warnings:"),
'pycodestyle/ignore', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Example codes: E201, E303"))
code_style_max_line_length = self.create_spinbox(
_("Maximum allowed line length:"), None,
'pycodestyle/max_line_length', min_=10, max_=500, step=1,
tip=_("Default is 79"))
# Code style layout
code_style_g_layout = QGridLayout()
code_style_g_layout.addWidget(
self.code_style_filenames_match.label, 1, 0)
code_style_g_layout.addWidget(
self.code_style_filenames_match.textbox, 1, 1)
code_style_g_layout.addWidget(self.code_style_exclude.label, 2, 0)
code_style_g_layout.addWidget(self.code_style_exclude.textbox, 2, 1)
code_style_g_layout.addWidget(code_style_select.label, 3, 0)
code_style_g_layout.addWidget(code_style_select.textbox, 3, 1)
code_style_g_layout.addWidget(code_style_ignore.label, 4, 0)
code_style_g_layout.addWidget(code_style_ignore.textbox, 4, 1)
code_style_g_layout.addWidget(code_style_max_line_length.plabel, 5, 0)
code_style_g_layout.addWidget(
code_style_max_line_length.spinbox, 5, 1)
# Set Code style options enabled/disabled
code_style_g_widget = QWidget()
code_style_g_widget.setLayout(code_style_g_layout)
code_style_g_widget.setEnabled(self.get_option('pycodestyle'))
code_style_check.toggled.connect(code_style_g_widget.setEnabled)
# Code style layout
code_style_layout = QVBoxLayout()
code_style_layout.addWidget(code_style_label)
code_style_layout.addWidget(code_style_check)
code_style_layout.addWidget(code_style_g_widget)
code_style_widget = QWidget()
code_style_widget.setLayout(code_style_layout)
# --- Docstring tab ---
# Docstring style label
numpy_url = (
"<a href='https://numpydoc.readthedocs.io/en/"
"latest/format.html'>Numpy</a>")
pep257_url = (
"<a href='https://www.python.org/dev/peps/pep-0257/'>PEP 257</a>")
docstring_style_codes = _(
"<a href='http://www.pydocstyle.org/en/stable"
"/error_codes.html'>page</a>")
docstring_style_label = QLabel(
_("Here you can decide if you want to perform style analysis on "
"your docstrings according to the {} or {} conventions. You can "
"also decide if you want to show or ignore specific errors, "
"according to the codes found on this {}.").format(
numpy_url, pep257_url, docstring_style_codes))
docstring_style_label.setOpenExternalLinks(True)
docstring_style_label.setWordWrap(True)
# Docstring style checkbox
docstring_style_check = self.create_checkbox(
_("Enable docstring style linting"),
'pydocstyle')
# Docstring style options
docstring_style_convention = self.create_combobox(
_("Choose the convention used to lint docstrings: "),
(("Numpy", 'numpy'),
("PEP 257", 'pep257'),
("Custom", 'custom')),
'pydocstyle/convention')
self.docstring_style_select = self.create_lineedit(
_("Show the following errors:"),
'pydocstyle/select', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Example codes: D413, D414"))
self.docstring_style_ignore = self.create_lineedit(
_("Ignore the following errors:"),
'pydocstyle/ignore', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Example codes: D107, D402"))
self.docstring_style_match = self.create_lineedit(
_("Only check filenames matching these patterns:"),
'pydocstyle/match', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Skip test files: (?!test_).*\\.py"))
self.docstring_style_match_dir = self.create_lineedit(
_("Only check in directories matching these patterns:"),
'pydocstyle/match_dir', alignment=Qt.Horizontal, word_wrap=False,
placeholder=_("Skip dot directories: [^\\.].*"))
# Custom option handling
docstring_style_convention.combobox.currentTextChanged.connect(
self.setup_docstring_style_convention)
current_convention = docstring_style_convention.combobox.currentText()
self.setup_docstring_style_convention(current_convention)
# Docstring style layout
docstring_style_g_layout = QGridLayout()
docstring_style_g_layout.addWidget(
docstring_style_convention.label, 1, 0)
docstring_style_g_layout.addWidget(
docstring_style_convention.combobox, 1, 1)
docstring_style_g_layout.addWidget(
self.docstring_style_select.label, 2, 0)
docstring_style_g_layout.addWidget(
self.docstring_style_select.textbox, 2, 1)
docstring_style_g_layout.addWidget(
self.docstring_style_ignore.label, 3, 0)
docstring_style_g_layout.addWidget(
self.docstring_style_ignore.textbox, 3, 1)
docstring_style_g_layout.addWidget(
self.docstring_style_match.label, 4, 0)
docstring_style_g_layout.addWidget(
self.docstring_style_match.textbox, 4, 1)
docstring_style_g_layout.addWidget(
self.docstring_style_match_dir.label, 5, 0)
docstring_style_g_layout.addWidget(
self.docstring_style_match_dir.textbox, 5, 1)
# Set Docstring style options enabled/disabled
docstring_style_g_widget = QWidget()
docstring_style_g_widget.setLayout(docstring_style_g_layout)
docstring_style_g_widget.setEnabled(self.get_option('pydocstyle'))
docstring_style_check.toggled.connect(
docstring_style_g_widget.setEnabled)
# Docstring style layout
docstring_style_layout = QVBoxLayout()
docstring_style_layout.addWidget(docstring_style_label)
docstring_style_layout.addWidget(docstring_style_check)
docstring_style_layout.addWidget(docstring_style_g_widget)
docstring_style_widget = QWidget()
docstring_style_widget.setLayout(docstring_style_layout)
# --- Advanced tab ---
# Advanced label
advanced_label = QLabel(
_("Please don't modify these values unless "
"you know what you're doing!"))
advanced_label.setWordWrap(True)
advanced_label.setAlignment(Qt.AlignJustify)
# Advanced options
advanced_command_launch = self.create_lineedit(
_("Command to launch the Python language server: "),
'advanced/command_launch', alignment=Qt.Horizontal,
word_wrap=False)
advanced_host = self.create_lineedit(
_("IP Address and port to bind the server to: "),
'advanced/host', alignment=Qt.Horizontal,
word_wrap=False)
advanced_port = self.create_spinbox(
":", "", 'advanced/port', min_=1, max_=65535, step=1)
# Advanced layout
advanced_g_layout = QGridLayout()
advanced_g_layout.addWidget(advanced_command_launch.label, 1, 0)
advanced_g_layout.addWidget(advanced_command_launch.textbox, 1, 1)
advanced_g_layout.addWidget(advanced_host.label, 2, 0)
advanced_host_port_g_layout = QGridLayout()
advanced_host_port_g_layout.addWidget(advanced_host.textbox, 1, 0)
advanced_host_port_g_layout.addWidget(advanced_port.plabel, 1, 1)
advanced_host_port_g_layout.addWidget(advanced_port.spinbox, 1, 2)
advanced_g_layout.addLayout(advanced_host_port_g_layout, 2, 1)
advanced_widget = QWidget()
advanced_layout = QVBoxLayout()
advanced_layout.addWidget(advanced_label)
advanced_layout.addLayout(advanced_g_layout)
advanced_widget.setLayout(advanced_layout)
# --- Other servers tab ---
# Section label
servers_label = QLabel(
_("Spyder uses the <a href=\"{lsp_url}\">Language Server "
"Protocol</a> to provide code completion and linting "
"for its Editor. Here, you can setup and configure LSP servers "
"for languages other than Python, so Spyder can provide such "
"features for those languages as well."
).format(lsp_url=LSP_URL))
servers_label.setOpenExternalLinks(True)
servers_label.setWordWrap(True)
servers_label.setAlignment(Qt.AlignJustify)
# Servers table
table_group = QGroupBox(_('Available servers:'))
self.table = LSPServerTable(self, text_color=ima.MAIN_FG_COLOR)
table_layout = QVBoxLayout()
table_layout.addWidget(self.table)
table_group.setLayout(table_layout)
# Buttons
self.reset_btn = QPushButton(_("Reset to default values"))
self.new_btn = QPushButton(_("Set up a new server"))
self.delete_btn = QPushButton(_("Delete currently selected server"))
self.delete_btn.setEnabled(False)
# Slots connected to buttons
self.new_btn.clicked.connect(self.create_new_server)
self.reset_btn.clicked.connect(self.reset_to_default)
self.delete_btn.clicked.connect(self.delete_server)
# Buttons layout
btns = [self.new_btn, self.delete_btn, self.reset_btn]
buttons_layout = QGridLayout()
for i, btn in enumerate(btns):
buttons_layout.addWidget(btn, i, 1)
buttons_layout.setColumnStretch(0, 1)
buttons_layout.setColumnStretch(1, 2)
buttons_layout.setColumnStretch(2, 1)
# Combined layout
servers_widget = QWidget()
servers_layout = QVBoxLayout()
servers_layout.addSpacing(-10)
servers_layout.addWidget(servers_label)
servers_layout.addWidget(table_group)
servers_layout.addSpacing(10)
servers_layout.addLayout(buttons_layout)
servers_widget.setLayout(servers_layout)
# --- Tabs organization ---
tabs = QTabWidget()
tabs.addTab(self.create_tab(basic_features_group, advanced_group),
_('Introspection'))
tabs.addTab(self.create_tab(linting_widget), _('Linting'))
tabs.addTab(self.create_tab(code_style_widget), _('Code style'))
tabs.addTab(self.create_tab(docstring_style_widget),
_('Docstring style'))
tabs.addTab(self.create_tab(advanced_widget),
_('Advanced'))
tabs.addTab(self.create_tab(servers_widget), _('Other languages'))
vlayout = QVBoxLayout()
vlayout.addWidget(tabs)
self.setLayout(vlayout)
def __init__(self, parent, enable_replace=False):
QWidget.__init__(self, parent)
self.enable_replace = enable_replace
self.editor = None
self.is_code_editor = None
glayout = QGridLayout()
glayout.setContentsMargins(0, 0, 0, 0)
self.setLayout(glayout)
self.close_button = create_toolbutton(self, triggered=self.hide,
icon=ima.icon('DialogCloseButton'))
glayout.addWidget(self.close_button, 0, 0)
# Find layout
self.search_text = PatternComboBox(self, tip=_("Search string"),
adjust_to_minimum=False)
self.search_text.valid.connect(
lambda state:
self.find(changed=False, forward=True, rehighlight=False))
self.search_text.lineEdit().textEdited.connect(
self.text_has_been_edited)
self.previous_button = create_toolbutton(self,
triggered=self.find_previous,
icon=ima.icon('ArrowUp'))
self.next_button = create_toolbutton(self,
triggered=self.find_next,
icon=ima.icon('ArrowDown'))
self.next_button.clicked.connect(self.update_search_combo)
self.previous_button.clicked.connect(self.update_search_combo)
self.re_button = create_toolbutton(self, icon=ima.icon('advanced'),
tip=_("Regular expression"))
self.re_button.setCheckable(True)
self.re_button.toggled.connect(lambda state: self.find())
self.case_button = create_toolbutton(self,
icon=get_icon("upper_lower.png"),
tip=_("Case Sensitive"))
self.case_button.setCheckable(True)
self.case_button.toggled.connect(lambda state: self.find())
self.words_button = create_toolbutton(self,
icon=get_icon("whole_words.png"),
tip=_("Whole words"))
self.words_button.setCheckable(True)
self.words_button.toggled.connect(lambda state: self.find())
self.highlight_button = create_toolbutton(self,
icon=get_icon("highlight.png"),
tip=_("Highlight matches"))
self.highlight_button.setCheckable(True)
self.highlight_button.toggled.connect(self.toggle_highlighting)
hlayout = QHBoxLayout()
self.widgets = [self.close_button, self.search_text,
self.previous_button, self.next_button,
self.re_button, self.case_button, self.words_button,
self.highlight_button]
for widget in self.widgets[1:]:
hlayout.addWidget(widget)
glayout.addLayout(hlayout, 0, 1)
# Replace layout
replace_with = QLabel(_("Replace with:"))
self.replace_text = PatternComboBox(self, adjust_to_minimum=False,
tip=_('Replace string'))
self.replace_button = create_toolbutton(self,
text=_('Replace/find'),
icon=ima.icon('DialogApplyButton'),
triggered=self.replace_find,
text_beside_icon=True)
self.replace_button.clicked.connect(self.update_replace_combo)
self.replace_button.clicked.connect(self.update_search_combo)
self.all_check = QCheckBox(_("Replace all"))
self.replace_layout = QHBoxLayout()
widgets = [replace_with, self.replace_text, self.replace_button,
self.all_check]
for widget in widgets:
self.replace_layout.addWidget(widget)
glayout.addLayout(self.replace_layout, 1, 1)
self.widgets.extend(widgets)
self.replace_widgets = widgets
self.hide_replace()
self.search_text.setTabOrder(self.search_text, self.replace_text)
self.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
self.shortcuts = self.create_shortcuts(parent)
self.highlight_timer = QTimer(self)
self.highlight_timer.setSingleShot(True)
self.highlight_timer.setInterval(1000)
self.highlight_timer.timeout.connect(self.highlight_matches)
def setup(self):
"""Setup the ShortcutEditor with the provided arguments."""
# Widgets
icon_info = HelperToolButton()
icon_info.setIcon(get_std_icon('MessageBoxInformation'))
layout_icon_info = QVBoxLayout()
layout_icon_info.setContentsMargins(0, 0, 0, 0)
layout_icon_info.setSpacing(0)
layout_icon_info.addWidget(icon_info)
layout_icon_info.addStretch(100)
self.label_info = QLabel()
self.label_info.setText(
_("Press the new shortcut and select 'Ok' to confirm, "
"click 'Cancel' to revert to the previous state, "
"or use 'Clear' to unbind the command from a shortcut."))
self.label_info.setAlignment(Qt.AlignTop | Qt.AlignLeft)
self.label_info.setWordWrap(True)
layout_info = QHBoxLayout()
layout_info.setContentsMargins(0, 0, 0, 0)
layout_info.addLayout(layout_icon_info)
layout_info.addWidget(self.label_info)
layout_info.setStretch(1, 100)
self.label_current_sequence = QLabel(_("Current shortcut:"))
self.text_current_sequence = QLabel(self.current_sequence)
self.label_new_sequence = QLabel(_("New shortcut:"))
self.text_new_sequence = ShortcutLineEdit(self)
self.text_new_sequence.setPlaceholderText(_("Press shortcut."))
self.helper_button = HelperToolButton()
self.helper_button.setIcon(QIcon())
self.label_warning = QLabel()
self.label_warning.setWordWrap(True)
self.label_warning.setAlignment(Qt.AlignTop | Qt.AlignLeft)
self.button_default = QPushButton(_('Default'))
self.button_ok = QPushButton(_('Ok'))
self.button_ok.setEnabled(False)
self.button_clear = QPushButton(_('Clear'))
self.button_cancel = QPushButton(_('Cancel'))
button_box = QHBoxLayout()
button_box.addWidget(self.button_default)
button_box.addStretch(100)
button_box.addWidget(self.button_ok)
button_box.addWidget(self.button_clear)
button_box.addWidget(self.button_cancel)
# New Sequence button box
self.btn_clear_sequence = create_toolbutton(
self, icon=ima.icon('editclear'),
tip=_("Clear all entered key sequences"),
triggered=self.clear_new_sequence)
self.button_back_sequence = create_toolbutton(
self, icon=ima.icon('ArrowBack'),
tip=_("Remove last key sequence entered"),
triggered=self.back_new_sequence)
newseq_btnbar = QHBoxLayout()
newseq_btnbar.setSpacing(0)
newseq_btnbar.setContentsMargins(0, 0, 0, 0)
newseq_btnbar.addWidget(self.button_back_sequence)
newseq_btnbar.addWidget(self.btn_clear_sequence)
# Setup widgets
self.setWindowTitle(_('Shortcut: {0}').format(self.name))
self.helper_button.setToolTip('')
style = """
QToolButton {
margin:1px;
border: 0px solid grey;
padding:0px;
border-radius: 0px;
}"""
self.helper_button.setStyleSheet(style)
icon_info.setToolTip('')
icon_info.setStyleSheet(style)
# Layout
layout_sequence = QGridLayout()
layout_sequence.setContentsMargins(0, 0, 0, 0)
layout_sequence.addLayout(layout_info, 0, 0, 1, 4)
layout_sequence.addItem(QSpacerItem(15, 15), 1, 0, 1, 4)
layout_sequence.addWidget(self.label_current_sequence, 2, 0)
layout_sequence.addWidget(self.text_current_sequence, 2, 2)
layout_sequence.addWidget(self.label_new_sequence, 3, 0)
layout_sequence.addWidget(self.helper_button, 3, 1)
layout_sequence.addWidget(self.text_new_sequence, 3, 2)
layout_sequence.addLayout(newseq_btnbar, 3, 3)
layout_sequence.addWidget(self.label_warning, 4, 2, 1, 2)
layout_sequence.setColumnStretch(2, 100)
layout_sequence.setRowStretch(4, 100)
layout = QVBoxLayout(self)
layout.addLayout(layout_sequence)
layout.addSpacing(10)
layout.addLayout(button_box)
layout.setSizeConstraint(layout.SetFixedSize)
# Signals
self.button_ok.clicked.connect(self.accept_override)
self.button_clear.clicked.connect(self.unbind_shortcut)
self.button_cancel.clicked.connect(self.reject)
self.button_default.clicked.connect(self.set_sequence_to_default)
# Set all widget to no focus so that we can register <Tab> key
# press event.
widgets = (
self.label_warning, self.helper_button, self.text_new_sequence,
self.button_clear, self.button_default, self.button_cancel,
self.button_ok, self.btn_clear_sequence, self.button_back_sequence)
for w in widgets:
w.setFocusPolicy(Qt.NoFocus)
w.clearFocus()
class ArrayEditor(QDialog):
"""Array Editor Dialog"""
def __init__(self, parent=None):
QDialog.__init__(self, parent)
# Destroying the C++ object right after closing the dialog box,
# otherwise it may be garbage-collected in another QThread
# (e.g. the editor's analysis thread in Spyder), thus leading to
# a segmentation fault on UNIX or an application crash on Windows
self.setAttribute(Qt.WA_DeleteOnClose)
self.data = None
self.arraywidget = None
self.stack = None
self.layout = None
# Values for 3d array editor
self.dim_indexes = [{}, {}, {}]
self.last_dim = 0 # Adjust this for changing the startup dimension
def setup_and_check(self, data, title='', readonly=False,
xlabels=None, ylabels=None):
"""
Setup ArrayEditor:
return False if data is not supported, True otherwise
"""
self.data = data
is_record_array = data.dtype.names is not None
is_masked_array = isinstance(data, np.ma.MaskedArray)
if data.size == 0:
self.error(_("Array is empty"))
return False
if data.ndim > 3:
self.error(_("Arrays with more than 3 dimensions are not supported"))
return False
if xlabels is not None and len(xlabels) != self.data.shape[1]:
self.error(_("The 'xlabels' argument length do no match array "
"column number"))
return False
if ylabels is not None and len(ylabels) != self.data.shape[0]:
self.error(_("The 'ylabels' argument length do no match array row "
"number"))
return False
if not is_record_array:
dtn = data.dtype.name
if dtn not in SUPPORTED_FORMATS and not dtn.startswith('str') \
and not dtn.startswith('unicode'):
arr = _("%s arrays") % data.dtype.name
self.error(_("%s are currently not supported") % arr)
return False
self.layout = QGridLayout()
self.setLayout(self.layout)
self.setWindowIcon(ima.icon('arredit'))
if title:
title = to_text_string(title) + " - " + _("NumPy array")
else:
title = _("Array editor")
if readonly:
title += ' (' + _('read only') + ')'
self.setWindowTitle(title)
self.resize(600, 500)
# Stack widget
self.stack = QStackedWidget(self)
if is_record_array:
for name in data.dtype.names:
self.stack.addWidget(ArrayEditorWidget(self, data[name],
readonly, xlabels, ylabels))
elif is_masked_array:
self.stack.addWidget(ArrayEditorWidget(self, data, readonly,
xlabels, ylabels))
self.stack.addWidget(ArrayEditorWidget(self, data.data, readonly,
xlabels, ylabels))
self.stack.addWidget(ArrayEditorWidget(self, data.mask, readonly,
xlabels, ylabels))
elif data.ndim == 3:
pass
else:
self.stack.addWidget(ArrayEditorWidget(self, data, readonly,
xlabels, ylabels))
self.arraywidget = self.stack.currentWidget()
self.stack.currentChanged.connect(self.current_widget_changed)
self.layout.addWidget(self.stack, 1, 0)
# Buttons configuration
btn_layout = QHBoxLayout()
if is_record_array or is_masked_array or data.ndim == 3:
if is_record_array:
btn_layout.addWidget(QLabel(_("Record array fields:")))
names = []
for name in data.dtype.names:
field = data.dtype.fields[name]
text = name
if len(field) >= 3:
title = field[2]
if not is_text_string(title):
title = repr(title)
text += ' - '+title
names.append(text)
else:
names = [_('Masked data'), _('Data'), _('Mask')]
if data.ndim == 3:
# QSpinBox
self.index_spin = QSpinBox(self, keyboardTracking=False)
self.index_spin.valueChanged.connect(self.change_active_widget)
# QComboBox
names = [str(i) for i in range(3)]
ra_combo = QComboBox(self)
ra_combo.addItems(names)
ra_combo.currentIndexChanged.connect(self.current_dim_changed)
# Adding the widgets to layout
label = QLabel(_("Axis:"))
btn_layout.addWidget(label)
btn_layout.addWidget(ra_combo)
self.shape_label = QLabel()
btn_layout.addWidget(self.shape_label)
label = QLabel(_("Index:"))
btn_layout.addWidget(label)
btn_layout.addWidget(self.index_spin)
self.slicing_label = QLabel()
btn_layout.addWidget(self.slicing_label)
# set the widget to display when launched
self.current_dim_changed(self.last_dim)
else:
ra_combo = QComboBox(self)
ra_combo.currentIndexChanged.connect(self.stack.setCurrentIndex)
ra_combo.addItems(names)
btn_layout.addWidget(ra_combo)
if is_masked_array:
label = QLabel(_("<u>Warning</u>: changes are applied separately"))
label.setToolTip(_("For performance reasons, changes applied "\
"to masked array won't be reflected in "\
"array's data (and vice-versa)."))
btn_layout.addWidget(label)
btn_layout.addStretch()
bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Cancel)
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
btn_layout.addWidget(bbox)
self.layout.addLayout(btn_layout, 2, 0)
self.setMinimumSize(400, 300)
# Make the dialog act as a window
self.setWindowFlags(Qt.Window)
return True
def current_widget_changed(self, index):
self.arraywidget = self.stack.widget(index)
def change_active_widget(self, index):
"""
This is implemented for handling negative values in index for
3d arrays, to give the same behavior as slicing
"""
string_index = [':']*3
string_index[self.last_dim] = '<font color=red>%i</font>'
self.slicing_label.setText((r"Slicing: [" + ", ".join(string_index) +
"]") % index)
if index < 0:
data_index = self.data.shape[self.last_dim] + index
else:
data_index = index
slice_index = [slice(None)]*3
slice_index[self.last_dim] = data_index
stack_index = self.dim_indexes[self.last_dim].get(data_index)
if stack_index == None:
stack_index = self.stack.count()
self.stack.addWidget(ArrayEditorWidget(self,
self.data[slice_index]))
self.dim_indexes[self.last_dim][data_index] = stack_index
self.stack.update()
self.stack.setCurrentIndex(stack_index)
def current_dim_changed(self, index):
"""
This change the active axis the array editor is plotting over
in 3D
"""
self.last_dim = index
string_size = ['%i']*3
string_size[index] = '<font color=red>%i</font>'
self.shape_label.setText(('Shape: (' + ', '.join(string_size) +
') ') % self.data.shape)
if self.index_spin.value() != 0:
self.index_spin.setValue(0)
else:
# this is done since if the value is currently 0 it does not emit
# currentIndexChanged(int)
self.change_active_widget(0)
self.index_spin.setRange(-self.data.shape[index],
self.data.shape[index]-1)
@Slot()
def accept(self):
"""Reimplement Qt method"""
for index in range(self.stack.count()):
self.stack.widget(index).accept_changes()
QDialog.accept(self)
def get_value(self):
"""Return modified array -- this is *not* a copy"""
# It is import to avoid accessing Qt C++ object as it has probably
# already been destroyed, due to the Qt.WA_DeleteOnClose attribute
return self.data
def error(self, message):
"""An error occured, closing the dialog box"""
QMessageBox.critical(self, _("Array editor"), message)
self.setAttribute(Qt.WA_DeleteOnClose)
self.reject()
@Slot()
def reject(self):
"""Reimplement Qt method"""
if self.arraywidget is not None:
for index in range(self.stack.count()):
self.stack.widget(index).reject_changes()
QDialog.reject(self)
def add_color_scheme_stack(self, scheme_name, custom=False):
"""Add a stack for a given scheme and connects the CONF values."""
color_scheme_groups = [
(_('Text'), ["normal", "comment", "string", "number", "keyword",
"builtin", "definition", "instance", ]),
(_('Highlight'), ["currentcell", "currentline", "occurrence",
"matched_p", "unmatched_p", "ctrlclick"]),
(_('Background'), ["background", "sideareas"])
]
parent = self.parent
line_edit = parent.create_lineedit(_("Scheme name:"),
'{0}/name'.format(scheme_name))
self.widgets[scheme_name] = {}
# Widget setup
line_edit.label.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
self.setWindowTitle(_('Color scheme editor'))
# Layout
name_layout = QHBoxLayout()
name_layout.addWidget(line_edit.label)
name_layout.addWidget(line_edit.textbox)
self.scheme_name_textbox[scheme_name] = line_edit.textbox
if not custom:
line_edit.textbox.setDisabled(True)
if not self.isVisible():
line_edit.setVisible(False)
cs_layout = QVBoxLayout()
cs_layout.addLayout(name_layout)
h_layout = QHBoxLayout()
v_layout = QVBoxLayout()
for index, item in enumerate(color_scheme_groups):
group_name, keys = item
group_layout = QGridLayout()
for row, key in enumerate(keys):
option = "{0}/{1}".format(scheme_name, key)
value = self.parent.get_option(option)
name = syntaxhighlighters.COLOR_SCHEME_KEYS[key]
if is_text_string(value):
label, clayout = parent.create_coloredit(
name,
option,
without_layout=True,
)
label.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
group_layout.addWidget(label, row+1, 0)
group_layout.addLayout(clayout, row+1, 1)
# Needed to update temp scheme to obtain instant preview
self.widgets[scheme_name][key] = [clayout]
else:
label, clayout, cb_bold, cb_italic = parent.create_scedit(
name,
option,
without_layout=True,
)
label.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
group_layout.addWidget(label, row+1, 0)
group_layout.addLayout(clayout, row+1, 1)
group_layout.addWidget(cb_bold, row+1, 2)
group_layout.addWidget(cb_italic, row+1, 3)
# Needed to update temp scheme to obtain instant preview
self.widgets[scheme_name][key] = [clayout, cb_bold,
cb_italic]
group_box = QGroupBox(group_name)
group_box.setLayout(group_layout)
if index == 0:
h_layout.addWidget(group_box)
else:
v_layout.addWidget(group_box)
h_layout.addLayout(v_layout)
cs_layout.addLayout(h_layout)
stackitem = QWidget()
stackitem.setLayout(cs_layout)
self.stack.addWidget(stackitem)
self.order.append(scheme_name)
def setup_page(self):
self.ICON = ima.icon('eyedropper')
names = self.get_option("names")
try:
names.pop(names.index(u'Custom'))
except ValueError:
pass
custom_names = self.get_option("custom_names", [])
# Interface options
theme_group = QGroupBox(_("Main interface"))
# Interface Widgets
ui_themes = ['Automatic', 'Light', 'Dark']
ui_theme_choices = list(zip(ui_themes, [ui_theme.lower()
for ui_theme in ui_themes]))
ui_theme_combo = self.create_combobox(_('Interface theme'),
ui_theme_choices,
'ui_theme',
restart=True)
styles = [str(txt) for txt in list(QStyleFactory.keys())]
# Don't offer users the possibility to change to a different
# style in Gtk-based desktops
# Fixes Issue 2036
if is_gtk_desktop() and ('GTK+' in styles):
styles = ['GTK+']
choices = list(zip(styles, [style.lower() for style in styles]))
style_combo = self.create_combobox(_('Qt windows style'), choices,
'windows_style',
default=self.main.default_style)
self.style_combobox = style_combo.combobox
themes = ['Spyder 2', 'Spyder 3']
icon_choices = list(zip(themes, [theme.lower() for theme in themes]))
icons_combo = self.create_combobox(_('Icon theme'), icon_choices,
'icon_theme', restart=True)
theme_comboboxes_layout = QGridLayout()
theme_comboboxes_layout.addWidget(ui_theme_combo.label, 0, 0)
theme_comboboxes_layout.addWidget(ui_theme_combo.combobox, 0, 1)
theme_comboboxes_layout.addWidget(style_combo.label, 1, 0)
theme_comboboxes_layout.addWidget(self.style_combobox, 1, 1)
theme_comboboxes_layout.addWidget(icons_combo.label, 2, 0)
theme_comboboxes_layout.addWidget(icons_combo.combobox, 2, 1)
theme_layout = QVBoxLayout()
theme_layout.addLayout(theme_comboboxes_layout)
theme_group.setLayout(theme_layout)
# Syntax coloring options
syntax_group = QGroupBox(_("Syntax highlighting theme"))
# Syntax Widgets
edit_button = QPushButton(_("Edit selected scheme"))
create_button = QPushButton(_("Create new scheme"))
self.delete_button = QPushButton(_("Delete scheme"))
self.reset_button = QPushButton(_("Reset to defaults"))
self.preview_editor = CodeEditor(self)
self.stacked_widget = QStackedWidget(self)
self.scheme_editor_dialog = SchemeEditor(parent=self,
stack=self.stacked_widget)
self.scheme_choices_dict = {}
schemes_combobox_widget = self.create_combobox('', [('', '')],
'selected')
self.schemes_combobox = schemes_combobox_widget.combobox
# Syntax layout
syntax_layout = QGridLayout(syntax_group)
btns = [self.schemes_combobox, edit_button, self.reset_button,
create_button, self.delete_button]
for i, btn in enumerate(btns):
syntax_layout.addWidget(btn, i, 1)
syntax_layout.setColumnStretch(0, 1)
syntax_layout.setColumnStretch(1, 2)
syntax_layout.setColumnStretch(2, 1)
syntax_layout.setContentsMargins(0, 12, 0, 12)
# Fonts options
fonts_group = QGroupBox(_("Fonts"))
# Fonts widgets
plain_text_font = self.create_fontgroup(
option='font',
title=_("Plain text"),
fontfilters=QFontComboBox.MonospacedFonts,
without_group=True)
rich_text_font = self.create_fontgroup(
option='rich_font',
title=_("Rich text"),
without_group=True)
# Fonts layouts
fonts_layout = QGridLayout()
fonts_layout.addWidget(plain_text_font.fontlabel, 0, 0)
fonts_layout.addWidget(plain_text_font.fontbox, 0, 1)
fonts_layout.addWidget(plain_text_font.sizelabel, 0, 2)
fonts_layout.addWidget(plain_text_font.sizebox, 0, 3)
fonts_layout.addWidget(rich_text_font.fontlabel, 1, 0)
fonts_layout.addWidget(rich_text_font.fontbox, 1, 1)
fonts_layout.addWidget(rich_text_font.sizelabel, 1, 2)
fonts_layout.addWidget(rich_text_font.sizebox, 1, 3)
fonts_group.setLayout(fonts_layout)
# Left options layout
options_layout = QVBoxLayout()
options_layout.addWidget(theme_group)
options_layout.addWidget(syntax_group)
options_layout.addWidget(fonts_group)
# Right preview layout
preview_group = QGroupBox(_("Preview"))
preview_layout = QVBoxLayout()
preview_layout.addWidget(self.preview_editor)
preview_group.setLayout(preview_layout)
# Combined layout
combined_layout = QGridLayout()
combined_layout.setRowStretch(0, 1)
combined_layout.setColumnStretch(1, 100)
combined_layout.addLayout(options_layout, 0, 0)
combined_layout.addWidget(preview_group, 0, 1)
self.setLayout(combined_layout)
# Signals and slots
create_button.clicked.connect(self.create_new_scheme)
edit_button.clicked.connect(self.edit_scheme)
self.reset_button.clicked.connect(self.reset_to_default)
self.delete_button.clicked.connect(self.delete_scheme)
self.schemes_combobox.currentIndexChanged.connect(self.update_preview)
self.schemes_combobox.currentIndexChanged.connect(self.update_buttons)
# Setup
for name in names:
self.scheme_editor_dialog.add_color_scheme_stack(name)
for name in custom_names:
self.scheme_editor_dialog.add_color_scheme_stack(name, custom=True)
self.update_combobox()
self.update_preview()
self.update_qt_style_combobox()
def setup(self):
"""Setup the ShortcutEditor with the provided arguments."""
# Widgets
icon_info = HelperToolButton()
icon_info.setIcon(get_std_icon('MessageBoxInformation'))
layout_icon_info = QVBoxLayout()
layout_icon_info.setContentsMargins(0, 0, 0, 0)
layout_icon_info.setSpacing(0)
layout_icon_info.addWidget(icon_info)
layout_icon_info.addStretch(100)
self.label_info = QLabel()
self.label_info.setText(
_("Press the new shortcut and select 'Ok' to confirm, "
"click 'Cancel' to revert to the previous state, "
"or use 'Clear' to unbind the command from a shortcut."))
self.label_info.setAlignment(Qt.AlignTop | Qt.AlignLeft)
self.label_info.setWordWrap(True)
layout_info = QHBoxLayout()
layout_info.setContentsMargins(0, 0, 0, 0)
layout_info.addLayout(layout_icon_info)
layout_info.addWidget(self.label_info)
layout_info.setStretch(1, 100)
self.label_current_sequence = QLabel(_("Current shortcut:"))
self.text_current_sequence = QLabel(self.current_sequence)
self.label_new_sequence = QLabel(_("New shortcut:"))
self.text_new_sequence = ShortcutLineEdit(self)
self.text_new_sequence.setPlaceholderText(_("Press shortcut."))
self.helper_button = HelperToolButton()
self.helper_button.setIcon(QIcon())
self.label_warning = QLabel()
self.label_warning.setWordWrap(True)
self.label_warning.setAlignment(Qt.AlignTop | Qt.AlignLeft)
self.button_default = QPushButton(_('Default'))
self.button_ok = QPushButton(_('Ok'))
self.button_ok.setEnabled(False)
self.button_clear = QPushButton(_('Clear'))
self.button_cancel = QPushButton(_('Cancel'))
button_box = QHBoxLayout()
button_box.addWidget(self.button_default)
button_box.addStretch(100)
button_box.addWidget(self.button_ok)
button_box.addWidget(self.button_clear)
button_box.addWidget(self.button_cancel)
# New Sequence button box
self.btn_clear_sequence = create_toolbutton(
self, icon=ima.icon('editclear'),
tip=_("Clear all entered key sequences"),
triggered=self.clear_new_sequence)
self.button_back_sequence = create_toolbutton(
self, icon=ima.icon('ArrowBack'),
tip=_("Remove last key sequence entered"),
triggered=self.back_new_sequence)
newseq_btnbar = QHBoxLayout()
newseq_btnbar.setSpacing(0)
newseq_btnbar.setContentsMargins(0, 0, 0, 0)
newseq_btnbar.addWidget(self.button_back_sequence)
newseq_btnbar.addWidget(self.btn_clear_sequence)
# Setup widgets
self.setWindowTitle(_('Shortcut: {0}').format(self.name))
self.helper_button.setToolTip('')
style = """
QToolButton {
margin:1px;
border: 0px solid grey;
padding:0px;
border-radius: 0px;
}"""
self.helper_button.setStyleSheet(style)
icon_info.setToolTip('')
icon_info.setStyleSheet(style)
# Layout
layout_sequence = QGridLayout()
layout_sequence.setContentsMargins(0, 0, 0, 0)
layout_sequence.addLayout(layout_info, 0, 0, 1, 4)
layout_sequence.addItem(QSpacerItem(15, 15), 1, 0, 1, 4)
layout_sequence.addWidget(self.label_current_sequence, 2, 0)
layout_sequence.addWidget(self.text_current_sequence, 2, 2)
layout_sequence.addWidget(self.label_new_sequence, 3, 0)
layout_sequence.addWidget(self.helper_button, 3, 1)
layout_sequence.addWidget(self.text_new_sequence, 3, 2)
layout_sequence.addLayout(newseq_btnbar, 3, 3)
layout_sequence.addWidget(self.label_warning, 4, 2, 1, 2)
layout_sequence.setColumnStretch(2, 100)
layout_sequence.setRowStretch(4, 100)
layout = QVBoxLayout()
layout.addLayout(layout_sequence)
layout.addSpacing(5)
layout.addLayout(button_box)
self.setLayout(layout)
# Signals
self.button_ok.clicked.connect(self.accept_override)
self.button_clear.clicked.connect(self.unbind_shortcut)
self.button_cancel.clicked.connect(self.reject)
self.button_default.clicked.connect(self.set_sequence_to_default)
# Set all widget to no focus so that we can register <Tab> key
# press event.
widgets = (
self.label_warning, self.helper_button, self.text_new_sequence,
self.button_clear, self.button_default, self.button_cancel,
self.button_ok, self.btn_clear_sequence, self.button_back_sequence)
for w in widgets:
w.setFocusPolicy(Qt.NoFocus)
w.clearFocus()
