def test_no_saving_intermidiate_state(self):
processor = Processor(1)
processor.add_pulse(pulse=Pulse(sigmax(),
coeff=np.ones(10),
tlist=np.linspace(0, 1, 10),
targets=0))
result = processor.run_state(basis(2, 0), tlist=[0, 1])
assert (len(result.states) == 2)
def testMultiLevelSystem(self):
"""
Test for processor with multi-level system
"""
N = 2
proc = Processor(N=N, dims=[2, 3])
proc.add_control(tensor(sigmaz(), rand_dm(3, density=1.)), label="sz0")
proc.set_all_coeffs({"sz0": np.array([1, 2])})
proc.set_all_tlist(np.array([0., 1., 2]))
proc.run_state(init_state=tensor([basis(2, 0), basis(3, 1)]))
def test_pulse_mode(self):
processor = Processor(2)
processor.add_control(sigmax(), targets=0, label="sx")
processor.set_coeffs({"sx": np.array([1., 2., 3.])})
processor.set_tlist({"sx": np.array([0., 1., 2., 3.])})
processor.pulse_mode = "continuous"
assert (processor.pulse_mode == "continuous")
assert (processor.pulses[0].spline_kind == "cubic")
processor.pulse_mode = "discrete"
assert (processor.pulse_mode == "discrete")
assert (processor.pulses[0].spline_kind == "step_func")
def test_id_evolution(self):
"""
Test for identity evolution
"""
N = 1
proc = Processor(N=N)
init_state = rand_ket(2)
tlist = [0., 1., 2.]
proc.add_pulse(Pulse(identity(2), 0, tlist, False))
result = proc.run_state(
init_state, options=Options(store_final_state=True))
global_phase = init_state.data[0, 0]/result.final_state.data[0, 0]
assert_allclose(global_phase*result.final_state, init_state)
def testChooseSolver(self):
# setup and fidelity without noise
init_state = qubit_states(2, [0, 0, 0, 0])
tlist = np.array([0., np.pi/2.])
a = destroy(2)
proc = Processor(N=2)
proc.add_control(sigmax(), targets=1)
proc.pulses[0].tlist = tlist
proc.pulses[0].coeff = np.array([1])
result = proc.run_state(init_state=init_state, solver="mcsolve")
assert_allclose(
fidelity(result.states[-1], qubit_states(2, [0, 1, 0, 0])),
1, rtol=1.e-7)
def testChooseSolver(self):
# setup and fidelity without noise
init_state = qubit_states(2, [0, 0, 0, 0])
tlist = np.linspace(0., np.pi / 2., 10)
a = destroy(2)
proc = Processor(N=2, t2=100)
proc.add_control(sigmax(), targets=1, label="sx")
proc.set_all_coeffs({"sx": np.array([1.] * len(tlist))})
proc.set_all_tlist(tlist)
observerable = tensor([qutip.qeye(2), qutip.sigmax()])
result1 = proc.run_state(init_state=init_state,
solver="mcsolve",
e_ops=observerable)
assert result1.solver == "mcsolve"
def testDrift(self):
"""
Test for the drift Hamiltonian
"""
processor = Processor(N=1)
processor.add_drift(sigmaz(), 0)
tlist = np.array([0., 1., 2.])
processor.add_pulse(Pulse(identity(2), 0, tlist, False))
ideal_qobjevo, _ = processor.get_qobjevo(noisy=True)
assert_equal(ideal_qobjevo.cte, sigmaz())
def test_user_defined_noise(self):
"""
Test for the user-defined noise object
"""
dr_noise = DriftNoise(sigmax())
proc = Processor(1)
proc.add_noise(dr_noise)
tlist = np.array([0, np.pi / 2.])
proc.add_pulse(Pulse(identity(2), 0, tlist, False))
result = proc.run_state(init_state=basis(2, 0))
assert_allclose(fidelity(result.states[-1], basis(2, 1)),
1,
rtol=1.0e-6)
def testMultiLevelSystem(self):
"""
Test for processor with multi-level system
"""
N = 2
proc = Processor(N=N, dims=[2, 3])
proc.add_control(tensor(sigmaz(), rand_dm(3, density=1.)))
proc.pulses[0].coeff = np.array([1, 2])
proc.pulses[0].tlist = np.array([0., 1., 2])
proc.run_state(init_state=tensor([basis(2, 0), basis(3, 1)]))
def testDrift(self):
"""
Test for the drift Hamiltonian
"""
processor = Processor(N=1)
processor.add_drift(sigmax() / 2, 0)
tlist = np.array([0., np.pi, 2 * np.pi, 3 * np.pi])
processor.add_pulse(Pulse(None, None, tlist, False))
ideal_qobjevo, _ = processor.get_qobjevo(noisy=True)
assert_equal(ideal_qobjevo(0), sigmax() / 2)
init_state = basis(2)
propagators = processor.run_analytically()
analytical_result = init_state
for unitary in propagators:
analytical_result = unitary * analytical_result
fid = fidelity(sigmax() * init_state, analytical_result)
assert ((1 - fid) < 1.0e-6)
def testSpline(self):
"""
Test if the spline kind is correctly transfered into
the arguments in QobjEvo
"""
tlist = np.array([1, 2, 3, 4, 5, 6], dtype=float)
coeff = np.array([1, 1, 1, 1, 1, 1], dtype=float)
processor = Processor(N=1, spline_kind="step_func")
processor.add_control(sigmaz())
processor.pulses[0].tlist = tlist
processor.pulses[0].coeff = coeff
ideal_qobjevo, _ = processor.get_qobjevo(noisy=False)
assert_(ideal_qobjevo.args["_step_func_coeff"])
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert_(noisy_qobjevo.args["_step_func_coeff"])
processor.T1 = 100.
processor.add_noise(ControlAmpNoise(coeff=coeff, tlist=tlist))
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert_(noisy_qobjevo.args["_step_func_coeff"])
tlist = np.array([1, 2, 3, 4, 5, 6], dtype=float)
coeff = np.array([1, 1, 1, 1, 1, 1], dtype=float)
processor = Processor(N=1, spline_kind="cubic")
processor.add_control(sigmaz())
processor.pulses[0].tlist = tlist
processor.pulses[0].coeff = coeff
ideal_qobjevo, _ = processor.get_qobjevo(noisy=False)
assert_(not ideal_qobjevo.args["_step_func_coeff"])
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert_(not noisy_qobjevo.args["_step_func_coeff"])
processor.T1 = 100.
processor.add_noise(ControlAmpNoise(coeff=coeff, tlist=tlist))
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert_(not noisy_qobjevo.args["_step_func_coeff"])
def testNoise(self):
"""
Test for Processor with noise
"""
# setup and fidelity without noise
init_state = qubit_states(2, [0, 0, 0, 0])
tlist = np.array([0., np.pi / 2.])
a = destroy(2)
proc = Processor(N=2)
proc.add_control(sigmax(), targets=1, label="sx")
proc.set_all_coeffs({"sx": np.array([1.])})
proc.set_all_tlist(tlist)
result = proc.run_state(init_state=init_state)
assert_allclose(fidelity(result.states[-1],
qubit_states(2, [0, 1, 0, 0])),
1,
rtol=1.e-7)
# decoherence noise
dec_noise = DecoherenceNoise([0.25 * a], targets=1)
proc.add_noise(dec_noise)
result = proc.run_state(init_state=init_state)
assert_allclose(fidelity(result.states[-1],
qubit_states(2, [0, 1, 0, 0])),
0.981852,
rtol=1.e-3)
# white random noise
proc.model._noise = []
white_noise = RandomNoise(0.2, np.random.normal, loc=0.1, scale=0.1)
proc.add_noise(white_noise)
result = proc.run_state(init_state=init_state)
def test_control_and_coeffs(self):
processor = Processor(2)
processor.add_control(sigmax())
processor.add_control(sigmaz())
# Set coeffs and tlist without a label
coeffs = np.array([[1., 2., 3.], [3., 2., 1.]])
processor.set_coeffs(coeffs)
assert_allclose(coeffs, processor.coeffs)
tlist = np.array([0., 1., 2., 3.])
processor.set_tlist(tlist)
assert_allclose(tlist, processor.get_full_tlist())
processor.set_tlist({0: tlist, 1: tlist})
assert_allclose(tlist, processor.get_full_tlist())
# Pulses
assert (len(processor.pulses) == 2)
assert (processor.find_pulse(0) == processor.pulses[0])
assert (processor.find_pulse(1) == processor.pulses[1])
with pytest.raises(KeyError):
processor.find_pulse("non_exist_pulse")
def testPlot(self):
"""
Test for plotting functions
"""
try:
import matplotlib.pyplot as plt
except Exception:
return True
# step_func
tlist = np.linspace(0., 2*np.pi, 20)
processor = Processor(N=1, spline_kind="step_func")
processor.add_control(sigmaz())
processor.pulses[0].tlist = tlist
processor.pulses[0].coeff = np.array([np.sin(t) for t in tlist])
processor.plot_pulses()
plt.clf()
# cubic spline
tlist = np.linspace(0., 2*np.pi, 20)
processor = Processor(N=1, spline_kind="cubic")
processor.add_control(sigmaz())
processor.pulses[0].tlist = tlist
processor.pulses[0].coeff = np.array([np.sin(t) for t in tlist])
processor.plot_pulses()
plt.clf()
def test_save_read(self):
"""
Test for saving and reading a pulse matrix
"""
proc = Processor(N=2)
proc.add_control(sigmaz(), label="sz")
proc.add_control(sigmax(), label="sx")
proc1 = Processor(N=2)
proc1.add_control(sigmaz(), label="sz")
proc1.add_control(sigmax(), label="sx")
proc2 = Processor(N=2)
proc2.add_control(sigmaz(), label="sz")
proc2.add_control(sigmax(), label="sx")
# TODO generalize to different tlist
tlist = np.array([0.0, 0.1, 0.2, 0.3, 0.4, 0.5])
amp1 = np.arange(0, 5, 1)
amp2 = np.arange(5, 0, -1)
proc.set_all_coeffs({
label: amp
for label, amp in zip(proc.get_control_labels(), [amp1, amp2])
})
proc.set_all_tlist(tlist)
proc.save_coeff("qutip_test_CircuitProcessor.txt")
proc1.read_coeff("qutip_test_CircuitProcessor.txt")
os.remove("qutip_test_CircuitProcessor.txt")
assert_allclose(proc1.get_full_coeffs(), proc.get_full_coeffs())
assert_allclose(proc1.get_full_tlist(), proc.get_full_tlist())
proc.save_coeff("qutip_test_CircuitProcessor.txt", inctime=False)
proc2.read_coeff("qutip_test_CircuitProcessor.txt", inctime=False)
proc2.set_all_tlist(tlist)
os.remove("qutip_test_CircuitProcessor.txt")
assert_allclose(proc2.get_full_coeffs(), proc.get_full_coeffs())
def test_save_read(self):
"""
Test for saving and reading a pulse matrix
"""
proc = Processor(N=2)
proc.add_control(sigmaz(), cyclic_permutation=True)
proc1 = Processor(N=2)
proc1.add_control(sigmaz(), cyclic_permutation=True)
proc2 = Processor(N=2)
proc2.add_control(sigmaz(), cyclic_permutation=True)
# TODO generalize to different tlist
tlist = np.array([0., 0.1, 0.2, 0.3, 0.4, 0.5])
amp1 = np.arange(0, 5, 1)
amp2 = np.arange(5, 0, -1)
proc.pulses[0].tlist = tlist
proc.pulses[0].coeff = amp1
proc.pulses[1].tlist = tlist
proc.pulses[1].coeff = amp2
proc.save_coeff("qutip_test_CircuitProcessor.txt")
proc1.read_coeff("qutip_test_CircuitProcessor.txt")
os.remove("qutip_test_CircuitProcessor.txt")
assert_allclose(proc1.get_full_coeffs(), proc.get_full_coeffs())
assert_allclose(proc1.get_full_tlist(), proc.get_full_tlist())
proc.save_coeff("qutip_test_CircuitProcessor.txt", inctime=False)
proc2.read_coeff("qutip_test_CircuitProcessor.txt", inctime=False)
proc2.set_all_tlist(tlist)
os.remove("qutip_test_CircuitProcessor.txt")
assert_allclose(proc2.get_full_coeffs(), proc.get_full_coeffs())
def test_modify_ctrls(self):
"""
Test for modifying Hamiltonian, add_control, remove_pulse
"""
N = 2
proc = Processor(N=N)
proc.ctrls
proc.add_control(sigmaz())
assert_(tensor([sigmaz(), identity(2)]), proc.ctrls[0])
proc.add_control(sigmax(), cyclic_permutation=True)
assert_allclose(len(proc.ctrls), 3)
assert_allclose(tensor([sigmax(), identity(2)]), proc.ctrls[1])
assert_allclose(tensor([identity(2), sigmax()]), proc.ctrls[2])
proc.add_control(sigmay(), targets=1)
assert_allclose(tensor([identity(2), sigmay()]), proc.ctrls[3])
proc.remove_pulse([0, 1, 2])
assert_allclose(tensor([identity(2), sigmay()]), proc.ctrls[0])
proc.remove_pulse(0)
assert_allclose(len(proc.ctrls), 0)
def test_pulse_dict(self):
processor = Processor(1)
processor.add_control(sigmax(), 0, label="test")
assert("test" in processor.get_pulse_dict())
def test_repeated_use_of_processor(self):
processor = Processor(1, t1=1.)
processor.add_pulse(Pulse(sigmax(), targets=0, coeff=True))
result1 = processor.run_state(basis(2, 0), tlist=np.linspace(0, 1, 10))
result2 = processor.run_state(basis(2, 0), tlist=np.linspace(0, 1, 10))
assert_allclose(result1.states[-1].full(), result2.states[-1].full())
def test_plot(self):
"""
Test for plotting functions
"""
try:
import matplotlib.pyplot as plt
except Exception:
return True
# step_func
tlist = np.linspace(0., 2 * np.pi, 20)
processor = Processor(N=1, spline_kind="step_func")
processor.add_control(sigmaz(), label="sz")
processor.set_all_coeffs({"sz": np.array([np.sin(t) for t in tlist])})
processor.set_all_tlist(tlist)
fig, _ = processor.plot_pulses(use_control_latex=False)
# testing under Xvfb with pytest-xvfb complains if figure windows are
# left open, so we politely close it:
plt.close(fig)
# cubic spline
tlist = np.linspace(0., 2 * np.pi, 20)
processor = Processor(N=1, spline_kind="cubic")
processor.add_control(sigmaz(), label="sz")
processor.set_all_coeffs({"sz": np.array([np.sin(t) for t in tlist])})
processor.set_all_tlist(tlist)
fig, _ = processor.plot_pulses(use_control_latex=False)
# testing under Xvfb with pytest-xvfb complains if figure windows are
# left open, so we politely close it:
plt.close(fig)
def testGetObjevo(self):
tlist = np.array([1, 2, 3, 4, 5, 6], dtype=float)
coeff = np.array([1, 1, 1, 1, 1, 1], dtype=float)
processor = Processor(N=1)
processor.add_control(sigmaz(), label="sz")
processor.set_all_coeffs({"sz": coeff})
processor.set_all_tlist(tlist)
# without noise
unitary_qobjevo, _ = processor.get_qobjevo(args={"test": True},
noisy=False)
assert_allclose(unitary_qobjevo.ops[0].qobj, sigmaz())
assert_allclose(unitary_qobjevo.tlist, tlist)
assert_allclose(unitary_qobjevo.ops[0].coeff, coeff[0])
assert_(unitary_qobjevo.args["test"],
msg="Arguments not correctly passed on")
# with decoherence noise
dec_noise = DecoherenceNoise(c_ops=sigmax(), coeff=coeff, tlist=tlist)
processor.add_noise(dec_noise)
assert_equal(unitary_qobjevo.to_list(),
processor.get_qobjevo(noisy=False)[0].to_list())
noisy_qobjevo, c_ops = processor.get_qobjevo(args={"test": True},
noisy=True)
assert_(noisy_qobjevo.args["_step_func_coeff"],
msg="Spline type not correctly passed on")
assert_(noisy_qobjevo.args["test"],
msg="Arguments not correctly passed on")
assert_(sigmaz() in [pair[0] for pair in noisy_qobjevo.to_list()])
assert_equal(c_ops[0].ops[0].qobj, sigmax())
assert_equal(c_ops[0].tlist, tlist)
# with amplitude noise
processor = Processor(N=1, spline_kind="cubic")
processor.add_control(sigmaz(), label="sz")
tlist = np.linspace(1, 6, int(5 / 0.2))
coeff = np.random.rand(len(tlist))
processor.set_all_coeffs({"sz": coeff})
processor.set_all_tlist(tlist)
amp_noise = ControlAmpNoise(coeff=coeff, tlist=tlist)
processor.add_noise(amp_noise)
noisy_qobjevo, c_ops = processor.get_qobjevo(args={"test": True},
noisy=True)
assert ("_step_func_coeff" not in noisy_qobjevo.args)
assert noisy_qobjevo.args["test"]
assert_equal(len(noisy_qobjevo.ops), 2)
assert_equal(sigmaz(), noisy_qobjevo.ops[0].qobj)
assert_allclose(coeff, noisy_qobjevo.ops[0].coeff, rtol=1.e-10)
def test_id_with_T1_T2(self):
"""
Test for identity evolution with relaxation t1 and t2
"""
# setup
a = destroy(2)
Hadamard = hadamard_transform(1)
ex_state = basis(2, 1)
mines_state = (basis(2, 1) - basis(2, 0)).unit()
end_time = 2.
tlist = np.arange(0, end_time + 0.02, 0.02)
t1 = 1.
t2 = 0.5
# test t1
test = Processor(1, t1=t1)
# zero ham evolution
test.add_pulse(Pulse(identity(2), 0, tlist, False))
result = test.run_state(ex_state, e_ops=[a.dag() * a])
assert_allclose(result.expect[0][-1],
np.exp(-1. / t1 * end_time),
rtol=1e-5,
err_msg="Error in t1 time simulation")
# test t2
test = Processor(1, t2=t2)
test.add_pulse(Pulse(identity(2), 0, tlist, False))
result = test.run_state(init_state=mines_state,
e_ops=[Hadamard * a.dag() * a * Hadamard])
assert_allclose(result.expect[0][-1],
np.exp(-1. / t2 * end_time) * 0.5 + 0.5,
rtol=1e-5,
err_msg="Error in t2 time simulation")
# test t1 and t2
t1 = np.random.rand(1) + 0.5
t2 = np.random.rand(1) * 0.5 + 0.5
test = Processor(1, t1=t1, t2=t2)
test.add_pulse(Pulse(identity(2), 0, tlist, False))
result = test.run_state(init_state=mines_state,
e_ops=[Hadamard * a.dag() * a * Hadamard])
assert_allclose(result.expect[0][-1],
np.exp(-1. / t2 * end_time) * 0.5 + 0.5,
rtol=1e-5,
err_msg="Error in t1 & t2 simulation, "
"with t1={} and t2={}".format(t1, t2))
def testSpline(self):
"""
Test if the spline kind is correctly transfered into
the arguments in QobjEvo
"""
tlist = np.array([1, 2, 3, 4, 5, 6], dtype=float)
coeff = np.array([1, 1, 1, 1, 1, 1], dtype=float)
processor = Processor(N=1, spline_kind="step_func")
processor.add_control(sigmaz(), label="sz")
processor.set_all_coeffs({"sz": coeff})
processor.set_tlist(tlist)
ideal_qobjevo, _ = processor.get_qobjevo(noisy=False)
assert_(ideal_qobjevo.args["_step_func_coeff"])
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert_(noisy_qobjevo.args["_step_func_coeff"])
processor.add_noise(ControlAmpNoise(coeff=coeff, tlist=tlist))
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert_(noisy_qobjevo.args["_step_func_coeff"])
tlist = np.array([1, 2, 3, 4, 5, 6], dtype=float)
coeff = np.array([1, 1, 1, 1, 1, 1], dtype=float)
processor = Processor(N=1, spline_kind="cubic")
processor.add_control(sigmaz(), label="sz")
processor.set_all_coeffs({"sz": coeff})
processor.set_all_tlist(tlist)
ideal_qobjevo, _ = processor.get_qobjevo(noisy=False)
assert ("_step_func_coeff" not in ideal_qobjevo.args)
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert ("_step_func_coeff" not in noisy_qobjevo.args)
processor.t1 = 100.
processor.add_noise(ControlAmpNoise(coeff=coeff, tlist=tlist))
noisy_qobjevo, c_ops = processor.get_qobjevo(noisy=True)
assert ("_step_func_coeff" not in noisy_qobjevo.args)