def readExps(clsIO,clsEOS,dicSAM,dicEXP,clsUNI) :
iERR = 0
iLine = 0
fInp = clsIO.fInp
#-- Experiment Names & Mnemonics ------------------------------------
sNam = {'CCE' :'CCE','CVD' :'CVD','DLE' :'DLE','SEP' :'SEP',
'FLASH':'FLS','PSAT':'SAT','SWELL':'SWL','GRAD':'GRD'}
#== Inactivate existing experiments ===================================
for iExp in range(len(dicEXP)) : dicEXP[iExp].IsAct = False
#== Main Read Loop ====================================================
for curL in fInp :
iLine += 1
if iLine > 100 :
print("Too Many Lines of EXP Data - Error")
iERR = -1
break
tokS = curL.split()
nTok = len(tokS)
if nTok == 0 : pass #-- Blank line!
elif tokS[0][:2] == "--" : pass #-- Comment
elif tokS[0][:3].upper() == "DEB" : iERR = RG.readDebug(clsIO)
elif tokS[0][:3].upper() == "OPT" : iERR = RG.readOption(clsIO)
elif tokS[0].upper() in sNam :
sHrt = sNam[tokS[0].upper()]
iERR = readGen(sHrt,clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "PLOT" :
if tokS[1].upper() == "NONE" :
clsIO.Pall = False
elif tokS[0][:4].upper() == "ENDE" :
#print("ENDEXP k/w found")
break
if iERR < 0 : break
#======================================================================
# Experiments Read OK => Run Them
#======================================================================
if iERR == 0 : CX.calcExps("",clsEOS,dicSAM,dicEXP,clsUNI,clsIO)
return iERR
def readReg(clsIO, clsEOS, dicSAM, dicEXP, clsUNI):
nExp = len(dicEXP)
print("readReg: Starting Regression with ", nExp, " Experiments Defined")
qExp = [False for i in range(nExp)]
#-- Process existing Experiments into a handy array -----------------
rExp = procExistExp(dicEXP)
#-- Number of Iterations [clean-up later!] --------------------------
mIter = None
#-- Dictionary of Regression Variables Held Locally -----------------
dicREG = {}
#========================================================================
# Read lines until we get to ENDREG (or too many lines!)
#========================================================================
iERR = 0
iLine = 0
fInp = clsIO.fInp
for curL in fInp:
iLine += 1
if iLine > 100:
print("Too Many Lines of REG Data - Error")
iERR = -1
break
tokS = curL.split()
nTok = len(tokS)
if nTok == 0: #-- Blank line!
pass
elif tokS[0].upper() == "EXP":
if nTok - 1 > nExp:
print(
"User appears to have declared more Experiments in Regression than previous defined - Error"
)
iERR = -1
break
iTok = 1
nTru = 0
while iTok < nTok:
sExp = tokS[iTok]
#print("iTok,sExp ",iTok,sExp)
for iExp in range(nExp):
if sExp == rExp[iExp]:
qExp[iExp] = True
nTru += 1
iTok += 1
if nTru < 1:
print("No Existing Experiments Selected within REG - Error")
iERR = -1
break
elif tokS[0][:2].upper() == "NI": #-- User Over-Writes Num Iterations
mIter = int(tokS[1])
elif tokS[0].upper() == "VAR":
iERR = readRegVars(clsIO, dicREG, dicSAM, clsEOS)
if iERR < 0: break
elif tokS[0][:3].upper() == "DEB":
iERR = RG.readDebug(clsIO)
if iERR < 0: break
elif tokS[0][:3].upper() == "OPT":
iERR = RG.readOption(clsIO)
if iERR < 0: break
elif tokS[0][:4].upper() == "ENDR":
#print("ENDREG k/w found")
break
if iERR < 0: break
#print("readReg: Of which ",nTru," Experiments have been selected")
#print("qExp ",qExp)
#======================================================================
# Everything OK! Run the Regression
#======================================================================
if mIter == None: mIter = 5
if iERR == 0:
nAct = 0
for iExp in range(nExp):
if qExp[iExp]: nAct += 1
print("readReg: Of Which ", nAct, " Experiments Are Active")
#clsEOS,dicSAM,dicEXP = \
# CR.runRegression(mIter,qExp,clsEOS,dicSAM,dicEXP,dicREG,clsUNI,clsIO)
clsEOS,dicSAM,dicEXP = \
CR.runRegression(mIter,qExp,clsEOS,dicSAM,dicEXP,dicREG,clsUNI,clsIO)
#== Return values =====================================================
return iERR, clsEOS, dicSAM, dicEXP
def PVTfree():
iERR, clsIO = checkInputFile()
if iERR < 0: return iERR
clsIO.setDocStr(UT.aboutPVTfree.__doc__) #-- DocString => clsIO
#--------------------------------------------------------------------
# Dictionaries to Hold Classes of Samples and Experiments
# Dictionary of Regression Classes is held locally
#--------------------------------------------------------------------
dicSAM = {}
dicEXP = {}
#-- Initialise the Units class --------------------------------------
clsUNI = UN.classUnits()
#---------------------------------------------------------------------
# Get Machine Epsilon
#---------------------------------------------------------------------
macEPS = UT.calcMacEPS()
UT.macEPS = macEPS #-- Over-write the value set in constants.py
#---------------------------------------------------------------------
# Parse Input File Line by Line
#---------------------------------------------------------------------
fInp = clsIO.fInp
fOut = clsIO.fOut
iCnt = 0
for curL in fInp:
iCnt += 1
#-- Current Line in curL; split into List tokS ----------------------
tokS = curL.split()
nTok = len(tokS)
#-- Blank or Comment? -----------------------------------------------
if nTok == 0: pass #-- Blank line
elif tokS[0][:2] == "--":
pass #-- Comment!
#-- Initial Section -------------------------------------------------
elif tokS[0][:4].upper() == "INIT":
iERR, clsEOS = RD.readINIT(dicSAM, clsUNI, clsIO)
if iERR < 0: break
#-- Is this a DEF/ENDDEF fluid definition? --------------------------
elif tokS[0][:3].upper() == "DEF":
fDef = clsIO.fInp
iERR, clsEOS, dicSAM = RD.readDEF(fDef, dicSAM, clsIO)
if iERR < 0: break
#-- Read Experiments Definitions ------------------------------------
elif tokS[0].upper() == "EXP":
iERR = RX.readExps(clsIO, clsEOS, dicSAM, dicEXP, clsUNI)
if iERR < 0: break
#-- Read Regression Definitions -------------------------------------
elif tokS[0].upper() == "REG":
iERR,clsEOS,dicSAM,dicEXP = \
RR.readReg(clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
if iERR < 0: break
#-- Read Grouping Definitions ---------------------------------------
elif tokS[0][:2].upper() == "GR":
iERR,clsEOS,dicSAM,dicEXP = \
RG.readGroup(clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
if iERR < 0: break
#-- Read Blackoil Definitions ---------------------------------------
elif tokS[0][:2].upper() == "BL":
iERR = RB.readBlack(clsIO, clsEOS, dicSAM, clsUNI)
if iERR < 0: break
#-- Read Compositional Definitions ----------------------------------
elif tokS[0][:2].upper() == "CO":
clsIO.fSim = clsIO.rNam + "_EOS.sim"
iERR = RC.readComp(clsEOS, dicSAM, clsIO, clsUNI)
if iERR < 0: break
#-- Read DEBUG controls ---------------------------------------------
elif tokS[0][:3].upper() == "DEB":
iERR = RE.readDebug(clsIO)
if iERR < 0: break
#-- Read OPTION controls --------------------------------------------
elif tokS[0][:3].upper() == 'OPT':
iERR = RE.readOption(clsIO)
if iERR < 0: break
#-- Read TITLE1 -----------------------------------------------------
elif tokS[0].upper() == "TITLE1":
clsIO.Tit1 = buildTitle(tokS)
#-- Read TITLE2 -----------------------------------------------------
elif tokS[0].upper() == "TITLE2":
clsIO.Tit2 = buildTitle(tokS)
#-- Read TITLE3 -----------------------------------------------------
elif tokS[0].upper() == "TITLE3":
clsIO.Tit3 = buildTitle(tokS)
#-- Temporary STOP Card ---------------------------------------------
elif tokS[0].upper() == "STOP":
break
else:
pass
#== Close All Output Files =============================================
closeFiles(clsIO)
#== Return the Error Flag ==============================================
return iERR
def readExps(clsIO,clsEOS,dicSAM,dicEXP,clsUNI) :
iERR = 0
iLine = 0
fInP = clsIO.fInP
#== Inactivate existing experiments ===================================
nExp = len(dicEXP)
for iExp in range(nExp) : dicEXP[iExp].IsAct = False
#== Main Read Loop ====================================================
for curL in fInP :
iLine += 1
if iLine > 100 :
print("Too Many Lines of EXP Data - Error")
iERR = -1
break
tokS = curL.split()
nTok = len(tokS)
if nTok == 0 : #-- Blank line!
pass
elif tokS[0][:2] == "--" : #-- Comment
pass
elif tokS[0][:3].upper() == "DEB" :
iERR = RG.readDebug(clsIO)
elif tokS[0].upper() == "CCE" :
iERR = readGen("CCE",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "CVD" :
iERR = readGen("CVD",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "DLE" :
iERR = readGen("DLE",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "SEP" :
iERR = readGen("SEP",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "FLASH" :
iERR = readGen("FLS",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "PSAT" :
iERR = readGen("SAT",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "SWELL" :
iERR = readGen("SWL",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "GRAD" :
iERR = readGen("GRD",clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
elif tokS[0].upper() == "PLOT" :
if tokS[1].upper() == "NONE" :
clsIO.Pall = False
elif tokS[0][:4].upper() == "ENDE" :
#print("ENDEXP k/w found")
break
if iERR < 0 : break
#======================================================================
# Experiments Read OK => Run Them
#======================================================================
if iERR == 0 :
sExt = ""
CX.calcExps(sExt,clsEOS,dicSAM,dicEXP,clsIO,clsUNI)
return iERR,dicEXP
def readGroup(clsIO,clsEOS0,clsEOSG,dicSAM0,dicSAMG,dicEXP0,clsUNI) :
print("Reading User Data for Grouping")
iERR = 0
iLine = 0
nOld = clsEOS0.NC #-- "Old" Number of Components in "Old" Class
nNew = 0
nTst = 0
iSam = 0 #-- By default, we will weight by Sample[0]
qExp = False
fInP = clsIO.fInP
dicGRP = {} #-- Dictionary to hold the new Groups
#== Loop over lines in the Input File =================================
for curL in fInP :
iLine += 1
if iLine > 100 :
print("Too Many Lines of GROUP Data - Error")
iERR = -1
break
tokS = curL.split()
nTok = len(tokS)
if nTok == 0 : pass #-- Blank line!
elif tokS[0][:2] == "--" : pass #-- Comment!
elif tokS[0][:4].upper() == "ENDG" : break #-- ENDGROUP => Exit
elif tokS[0][:3].upper() == "DEB" : #-- DEBUG
iERR = RG.readDebug(clsIO)
if iERR < 0 : break
elif tokS[0][:4].upper() == "RUNE" : qExp = True #-- Run Experiments
elif tokS[0][:2].upper() == "SA" : #-- SAMPLE for weighting
samNam = tokS[1]
iSam = checkSamp4Grp(samNam,dicSAM0)
if iSam < 0 :
print("Sample ",samNam," Proposed for Weighting Not Found - Error")
iERR = -1
return iERR
else :
#== Must be reading New Name and Old-Names ============================
newNam = tokS[0]
clsGRP = classGRP(newNam) #-- Create the New Group
dicGRP[nNew] = clsGRP #-- Add to the Dictionary of Groups
nNew += 1 #-- Increment the Counter
oldNam = []
iTok = 1
while iTok < nTok :
oldNam.append(tokS[iTok])
nTst += 1 #-- Test the number of "old" comps
iTok += 1
clsGRP.setOldNames(oldNam)
#----------------------------------------------------------------------
# Process Data
#----------------------------------------------------------------------
#print("nOld,nNew,nTst ",nOld,nNew,nTst)
c*K = [False for i in range(nOld)]
if nTst != nOld :
print("Currently have ",nOld," Components defined: Only ",nTst," Read - Error")
iERR = -1
return iERR,clsEOS0,dicSAM0,dicEXP0
for iNew in range(nNew) :
oldNam = dicGRP[iNew].oldNam
oldNum = []
nGrp = len(oldNam)
for iGrp in range(nGrp) :
sCom = oldNam[iGrp]
iCom = checkComp4Grp(sCom,clsEOS0)
if iCom < 0 :
print("Old Component Name ",sCom," Not Found - Error")
iERR = -1
return iERR,clsEOS0,dicSAM0,dicEXP0
else:
oldNum.append(iCom)
c*K[iCom] = True
dicGRP[iNew].setOldNums(oldNum)
#-- Do we have all 'old' components used? ---------------------------
for iC in range(nOld) :
if not c*K[iC] :
sCom = clsEOS0.gPP("CN",iC)
print("Component " + sCom + " Not Found Amongst 'Old' Components - Error")
iERR = -1
return iERR,clsEOS0,dicSAM0,dicEXP0
#== Do we want experiments run before and after grouping? ============
if qExp :
dicEXPG = deepcopy(dicEXP0)
sExt = " - Before Grouping"
CX.calcExps(sExt,clsEOS0,dicSAM0,dicEXP0,clsIO,clsUNI)
#======================================================================
# Perform the Grouping
#======================================================================
iERR = calcGroup(iSam,dicGRP,clsEOS0,clsEOSG,dicSAM0,dicSAMG)
if iERR == 0 :
print("Grouping Performed")
else :
print("Grouping Failed: Program Stopping")
return iERR,clsEOS0,dicSAM0,dicEXP0
#-- Write New System to the Output File -----------------------------
sTit = "Grouping From " + str(nOld) + " Components To " + str(nNew)
#WO.outputGroup(clsIO,nOld,nNew)
WO.outputProps(clsIO,clsEOSG,dicSAMG,sTit)
#-- Save the new EoS/Sample Definitions -----------------------------
sTit = "Grouping From " + str(nOld) + " Components To " + str(nNew)
WO.outputSave(sTit,clsEOSG,dicSAMG,clsIO)
#----------------------------------------------------------------------
# Re-run existing experiments?
#----------------------------------------------------------------------
if qExp :
sExt = " - After Grouping"
for iExp in range(len(dicEXPG)) : dicEXPG[iExp].IsAct = True
CX.calcExps(sExt,clsEOSG,dicSAMG,dicEXPG,clsIO,clsUNI)
qReg = False
GP.regPlots(clsIO,dicEXP0,dicEXPG,dicSAMG,qReg,clsUNI)
#----------------------------------------------------------------------
# Perform deepcopy to put Grouped EOS/Samples into Main Sets
#----------------------------------------------------------------------
clsEOS0 = deepcopy(clsEOSG)
dicSAM0 = deepcopy(dicSAMG)
if qExp :
dicEXP0 = deepcopy(dicEXPG)
#== End of Routine ====================================================
return iERR,clsEOS0,dicSAM0,dicEXP0
def readBlack(clsIO, clsEOS, dicSAM, clsUNI):
iERR = 0
iLine = 0
#print("readBlack: Entered")
pSep = []
tSep = []
Lsep = []
Vsep = []
pMax = None
pMin = None
pInc = None
sSam = None
Tres = None
xTyp = None
pRef = None
Salt = None
fInP = clsIO.fInP
#== Create the clsBLK class to hold relevant data ======================
clsBLK = classBLK()
#----------------------------------------------------------------------
# Loop over lines until ENDB[LACK] found
#----------------------------------------------------------------------
for curL in fInP:
iLine += 1
if iLine > 100:
print("Too Many Lines of BLACK Data - Error")
iERR = -1
break
tokS = curL.split()
nTok = len(tokS)
if nTok == 0: #-- Blank line!
pass
elif tokS[0][:2] == "--": #-- Comment
pass
elif tokS[0][:2].upper() == "PS": #-- Separator Train Pressures
pSuni = tokS[1].lower() #-- 1st Argument must be units
qPuni = pSuni in clsUNI.sPres
if qPuni:
clsBLK.setPsepUni(pSuni.upper())
else:
print(
"First argument after PSEP must be valid Pressure Units [PSIA, PSIG, BARA, BARG] - Error"
)
iERR = -1
break
iTok = 2
while iTok < nTok:
pVal = float(tokS[iTok])
pSep.append(clsUNI.X2I(pVal, pSuni))
iTok += 1
elif tokS[0][:2].upper() == "TS": #-- Separator Train Temps
tSuni = tokS[1].lower() #-- 1st Argument must be units
tPuni = tSuni in clsUNI.sTemp
if tPuni:
clsBLK.setTsepUni(tSuni.upper())
else:
print(
"First argument after TSEP must be valid Tempearture Units [degR, degF, degC, Kelv] - Error"
)
iERR = -1
break
iTok = 2
while iTok < nTok:
tVal = float(tokS[iTok])
tSep.append(clsUNI.X2I(tVal, tSuni))
iTok += 1
elif tokS[0][:2].upper() == "LS": #-- Next Stage for Sep-Liq
iTok = 1
while iTok < nTok:
lSep = int(tokS[iTok])
Lsep.append(lSep)
iTok += 1
elif tokS[0][:2].upper() == "VS": #-- Next Stage for Sep-Vap
iTok = 1
while iTok < nTok:
vSep = int(tokS[iTok])
Vsep.append(vSep)
iTok += 1
elif tokS[0][:2].upper() == "PR": #-- Pressure-RANGE (PRange)
pRuni = tokS[1].lower() #-- 1st Argument must be units
qPuni = pRuni in clsUNI.sPres
if qPuni:
clsBLK.setPresUni(pSuni.upper())
else:
print(
"First argument after PRANGE must be valid Pressure Units [PSIA, PSIG, BARA, BARG] - Error"
)
iERR = -1
break
iTok = 2
while iTok < nTok:
sVal = tokS[iTok].upper()
if sVal == "PMAX":
iTok += 1
pMax = float(tokS[iTok])
elif sVal == "PMIN":
iTok += 1
pMin = float(tokS[iTok])
elif sVal == "PINC":
iTok += 1
pInc = float(tokS[iTok])
iTok += 1
elif tokS[0][:2].upper() == "UN": #-- UNITS keyword [FIELD/METRIC]
uTyp = tokS[1].upper()
if uTyp[:1] == "M": clsBLK.setOutUnit("MET")
elif uTyp[:1] == "S": clsBLK.setOutUnit("SI") #-- CMG-Only!!
else: clsBLK.setOutUnit("FLD")
elif tokS[0][:2].upper(
) == "SI": #-- Simulator Type [CMG/ECL/MOR/VIP or NEX]
uTyp = tokS[1].upper()
if uTyp[:1] == "M": #-- Tempest-MORE
oTyp, gTyp = argsMORE(tokS)
clsBLK.setSimType("MOR")
clsBLK.setOilKeyW(oTyp)
clsBLK.setGasKeyW(gTyp)
elif uTyp[:1] == "C": #-- CMG-IMEX
oTyp = argsIMEX(tokS)
clsBLK.setSimType("CMG")
clsBLK.setOilKeyW(oTyp)
clsBLK.setGasKeyW("")
elif uTyp[:1] == "V" or uTyp[:1] == "N": #-- VIP or Nexus
oTyp, gTyp = argsVIP(tokS)
clsBLK.setSimType("VIP")
clsBLK.setOilKeyW(oTyp)
clsBLK.setGasKeyW(gTyp)
elif uTyp[:1] == "E": #-- Eclipse-100
oTyp, gTyp = argsE100(tokS)
clsBLK.setSimType("ECL")
clsBLK.setOilKeyW(oTyp)
clsBLK.setGasKeyW(gTyp)
else:
iERR = -1
print(
"Error - User has not set the Simulator Type for B/O Table Output"
)
break
elif tokS[0][:1].upper() == "W": #-- Properties to define Water
iTok = 1
while iTok < nTok:
if tokS[iTok][:1].upper() == "P": #-- Reference Pressure
iTok += 1
pRef = float(tokS[iTok])
iTok += 1
wUni = tokS[iTok]
elif tokS[iTok][:1].upper() == "S": #-- Salinity
iTok += 1
Salt = float(tokS[iTok])
iTok += 1
sUni = tokS[iTok]
iTok += 1
elif tokS[0][:3].upper() == "DEB":
iERR = RG.readDebug(clsIO)
if iERR < 0: break
elif tokS[0][:4].upper() == "ENDB":
#print("readBlack: ENDBLACK k/w read")
break
elif tokS[0][:3].upper() == "CCE" or \
tokS[0][:3].upper() == "CVD" or \
tokS[0][:3].upper() == "DLE" :
xTyp = tokS[0][:3].upper()
#-- Line must contains non-Table information ------------------------
else:
iTok = 0
while iTok < nTok:
if tokS[iTok].upper() == "SAMP":
iTok += 1
sSam = tokS[iTok]
elif tokS[iTok].upper() == "TRES":
iTok += 1
Tres = float(tokS[iTok])
iTok += 1
Tuni = tokS[iTok]
iTok += 1
#----------------------------------------------------------------------
# Process user data: Starting with Separator Train P's and T's
#----------------------------------------------------------------------
nPsep = len(pSep)
nTsep = len(tSep)
nLsep = len(Lsep)
nVsep = len(Vsep)
if nPsep == 0:
print("No Separator Pressure Stages Defined via PSEP - Error")
iERR = -1
return iERR
if nTsep == 0:
print("No Separator Temperature Stages Defined via TSEP - Error")
iERR = -1
return iERR
if nPsep != nTsep:
print("Number of PSEP Stages = ", nPsep,
" Must Equal Number of TSEP Stages = ", nTsep, " - Error")
iERR = -1
return iERR
if nLsep > 0:
if nLsep != nTsep:
print("Number of LSEP Stages = ", nLsep,
" Must Equal Number of TSEP Stages = ", nTsep, " - Error")
iERR = -1
return iERR
clsBLK.setSepLsep(Lsep)
else:
Lsep = [0 for i in range(nTsep)]
for iSep in range(nTsep - 1):
Lsep[iSep] = iSep + 1
clsBLK.setSepLsep(Lsep)
if nVsep > 0:
if nVsep != nTsep:
print("Number of VSEP Stages = ", nLsep,
" Must Equal Number of TSEP Stages = ", nTsep, " - Error")
iERR = -1
return iERR
clsBLK.setSepVsep(Vsep)
else:
Vsep = [0 for i in range(nTsep)]
clsBLK.setSepVsep(Vsep)
clsBLK.setSepPres(pSep)
clsBLK.setSepTemp(tSep)
#-- Pressure range (Max, Min: Inc) for table generation -------------
if pMax == None:
print("Maximum Pressure (PMAX) Has Not Been Set With PRANGE - Error")
iERR = -1
return iERR
else:
clsBLK.setPmax(clsUNI.X2I(pMax, pRuni))
if pMin == None:
print("Minimum Pressure (PMIN) Has Not Been Set With PRANGE - Error")
iERR = -1
return iERR
else:
clsBLK.setPmin(clsUNI.X2I(pMin, pRuni))
if pInc == None:
print("Pressure Increment (PINC) Has Not Been Set With PRANGE - Error")
iERR = -1
return iERR
else:
clsBLK.setPinc(clsUNI.X2I(pInc, pRuni))
#-- Valid Reservoir Sample to work on? ------------------------------
if sSam == None:
print("No Sample Name Has Been Read via SAMP argument - Error")
iERR = -1
return iERR
else:
nSam = len(dicSAM)
qFnd = False
for iSam in range(nSam):
sArr = dicSAM[iSam].sName
if sSam.upper() == sArr.upper():
clsBLK.setSample(iSam)
qFnd = True
break
if not qFnd:
print("Did Not Find Sample ", sSam,
" In Previously Defined Samples - Error")
iERR = -1
return iERR
#-- Reservoir Temperature and its Units -----------------------------
if Tres == None:
print(
"No Reservoir Temperature Has Been Read via TRES argument - Error")
iERR = -1
return iERR
else:
clsBLK.setTuni(Tuni)
clsBLK.setTres(clsUNI.X2I(Tres, Tuni))
#-- Experiment Type -------------------------------------------------
if xTyp == None:
print("Experiment Type (CCE, CVD or DLE) Not Specified - Error")
iERR = -1
return iERR
else:
clsBLK.setExpType(xTyp)
#-- Have we read the WATER card with pRef and Salt? -----------------
if pRef == None and Salt == None:
clsBLK.setBrine(False)
clsBLK.setPrefWat(14.6959) #-- Standard Pressure [psia]
clsBLK.setPrefUni("psia")
clsBLK.setSaltWat(0.0) #-- Pure Water
clsBLK.setSaltUni("mfrac")
else:
clsBLK.setBrine(True)
if Salt != None:
clsBLK.setSaltUni(sUni)
clsBLK.setSaltWat(clsUNI.X2I(Salt, sUni))
else:
clsBLK.setSaltWat(0.0) #-- Pure Water
clsBLK.setSaltUni("mfrac")
if pRef != None:
clsBLK.setPrefUni(wUni)
clsBLK.setPrefWat(clsUNI.X2I(pRef, wUni))
else:
clsBLK.setPrefWat(14.6959) #-- Standard Pressure [psia]
clsBLK.setPrefUni("psia")
#========================================================================
# Data All Valid, Proceed to Calculate Tables
#========================================================================
if iERR == 0:
print("readBlack: All BlackOil Data Read OK")
BD.calcBlack(clsIO, clsBLK, clsEOS, dicSAM, clsUNI)
#========================================================================
# End of Routine
#========================================================================
return iERR
def readDef(clsIO, dicSAM, clsUNI):
iERR = 0
iCnt = 0
fInP = clsIO.fInP
fOut = clsIO.fOut
macEPS = calcMacEPS() #-- Compute Machine Epsilon
#---------------------------------------------------------------------
# Parse Input File Line by Line
#---------------------------------------------------------------------
for curL in fInP:
iCnt += 1
#-- Current Line in curL; split into List tokS
tokS = curL.split()
nTok = len(tokS)
#-- Blank or Comment? -----------------------------------------------
if nTok == 0: #-- Blank line
pass
else:
if tokS[0][:2] == "--": pass
elif tokS[0][:4].upper() == "ENDD": break
elif tokS[0][:3].upper() == "DEB":
iERR = RE.readDebug(clsIO)
elif tokS[0].upper() == "EOS":
#-- Equation of State -----------------------------------------------
EOS = tokS[1].upper()
clsEOS = classEoS(EOS)
print("Equation of State Specified as ", EOS)
sCom = "--"
WO.outputHeader(fOut, sCom, clsIO)
WO.outputEOS(fOut, sCom, clsIO, clsEOS)
elif tokS[0].upper() == "NCOMP":
nComp = int(tokS[1])
clsEOS.NC = nComp
clsEOS.setNComp(nComp) #-- Dimension the Arrays
elif tokS[0].upper() == "NSAMP":
nSamp = int(tokS[1])
clsEOS.NS = nSamp
elif tokS[0].upper() == "PROPS":
curL = next(fInP) #-- Property Names
curL = next(fInP) #-- Property Units
for iC in range(nComp):
curL = next(fInP)
tokS = curL.split()
nTok = len(tokS)
if nTok != 17:
print("DEFINE PROPS: Expecting 17 Columns, Only ",
nTok, " Read")
iERR = -1
break
sN = tokS[0]
Mw = float(tokS[1])
Tc = float(tokS[2])
Pc = float(tokS[3])
Vc = float(tokS[4])
Zc = float(tokS[5])
AF = float(tokS[6])
Tb = float(tokS[7])
SG = float(tokS[8])
PA = float(tokS[9])
SS = float(tokS[10])
MA = float(tokS[11])
MB = float(tokS[12])
CA = float(tokS[13])
CB = float(tokS[14])
CC = float(tokS[15])
CD = float(tokS[16])
clsEOS.sPP("CN", iC, sN)
clsEOS.sPP("MW", iC, Mw)
clsEOS.sPP("TC", iC, Tc)
clsEOS.sPP("PC", iC, Pc)
clsEOS.sPP("VC", iC, Vc)
clsEOS.sPP("ZC", iC, Zc)
clsEOS.sPP("AF", iC, AF)
clsEOS.sPP("TB", iC, Tb)
clsEOS.sPP("SG", iC, SG)
clsEOS.sPP("PA", iC, PA)
clsEOS.sPP("SS", iC, SS)
clsEOS.sPP("MA", iC, MA)
clsEOS.sPP("MB", iC, MB)
clsEOS.sPP("CA", iC, CA)
clsEOS.sPP("CB", iC, CB)
clsEOS.sPP("CC", iC, CC)
clsEOS.sPP("CD", iC, CD)
elif tokS[0].upper() == "BIP":
curL = next(fInP) #-- Component Names
for iC in range(nComp):
curL = next(fInP)
tokS = curL.split()
nTok = len(tokS)
if nTok != nComp + 1:
print("DEFINE BIP: Expecting ", nComp + 1,
" Columns, Only ", nTok, " Read")
iERR = -1
break
iTok = 1
while iTok < nTok:
KIJ = float(tokS[iTok])
clsEOS.sIJ(iC, iTok - 1, KIJ)
iTok += 1
elif tokS[0].upper() == "SAMPLES":
curL = next(fInP) #-- Sample Names
tokS = curL.split()
nTok = len(tokS)
for iSamp in range(nSamp):
sName = tokS[iSamp + 1]
csSAM = RS.classSample(sName)
dicSAM[iSamp] = csSAM
dicSAM[iSamp].setNComp(nComp)
for iC in range(nComp):
curL = next(fInP)
tokS = curL.split()
if nTok != nSamp + 1:
print("DEFINE SAMPLES: Expecting ", nSamp + 1,
" Columns, Only ", nTok, " Read")
iERR = -1
break
for iSamp in range(nSamp):
ZI = float(tokS[iSamp + 1])
if ZI < macEPS: ZI = 1.0E-20 #-- Protect against Z = 0
dicSAM[iSamp].sZI(iC, ZI)
else:
pass
#========================================================================
# Has any slop crept into the sample definitions?
#========================================================================
for iSamp in range(nSamp):
sumT = 0.0
for iC in range(nComp):
sumT = sumT + dicSAM[iSamp].gZI(iC)
sumT = 1.0 / sumT
for iC in range(nComp):
zI = sumT * dicSAM[iSamp].gZI(iC)
dicSAM[iSamp].sZI(iC, zI)
#== Back-calculate the C7+ Properties =================================
backCalcPlusFracProps(clsEOS, dicSAM)
#========================================================================
# Do we need to sort the components? Most to Least Volatility
#========================================================================
clsEOS, dicSAM = CR.sortComponents(clsEOS, dicSAM)
#========================================================================
# Output the data
#========================================================================
sTit = "Initialisation from a saved DEFINE"
WO.outputProps(clsIO, clsEOS, dicSAM, sTit)
#========================================================================
# Write Fluid Description to the SAV file
#========================================================================
WO.outputSave(sTit, clsEOS, dicSAM, clsIO)
#======================================================================
# Generate (Approximate) Phase Plots
#======================================================================
CP.allSamplesPhasePlot(clsEOS, dicSAM, clsIO)
#== Return values =====================================================
return iERR, clsEOS, dicSAM
def readInit(clsIO, dicSAM, clsUNI):
iERR = 0
iCnt = 0
nSplt = 0
fInP = clsIO.fInP
fOut = clsIO.fOut
#----------------------------------------------------------------------
# Parse Input File Line by Line
#----------------------------------------------------------------------
for curL in fInP:
iCnt += 1
#-- Current Line in curL; split into List tokS ----------------------
tokS = curL.split()
nTok = len(tokS)
#== Process Options ===================================================
if nTok == 0: pass #-- Blank Line
elif tokS[0][:2] == "-- ": pass #-- Comment
elif tokS[0][:4].upper() == "ENDI":
break #-- ENDINIT k/w => Exit
#-- EOS K/W Read => Create the clsEOS to hold data ------------------
elif tokS[0].upper() == "EOS":
EOS = tokS[1].upper()
clsEOS = classEoS(EOS)
print("Equation of State Specified as ", EOS)
sCom = "--"
WO.outputHeader(fOut, sCom, clsIO)
WO.outputEOS(fOut, sCom, clsIO, clsEOS)
#-- SPLIT k/w -------------------------------------------------------
elif tokS[0][:3].upper() == "SPL":
nSplt = int(tokS[1])
#print("SPLIT: nSplt ",nSplt)
if nSplt < 2 or nSplt > 5:
print("SPLIT: nSplt ", nSplt,
" Out of Range, 2 =< Nsplt =< 5 - Error")
iERR = -1
break
else:
clsEOS.setNPseu(nSplt)
print("Plus Fraction will be split into ", nSplt,
" Pseudo-Components")
#-- SAMPLES k/w -----------------------------------------------------
elif tokS[0][:4].upper() == "SAMP":
if nSplt == 0:
nSplt = 1
clsEOS.setNPseu(nSplt)
iERR, dicSAM = RS.readSamp(clsIO, tokS, clsEOS, dicSAM, clsUNI)
if iERR < 0: break
#-- DEBUG k/w -------------------------------------------------------
elif tokS[0][:3].upper() == "DEB":
iERR = RE.readDebug(clsIO)
if iERR < 0: break
#== Return values =====================================================
return iERR, clsEOS, dicSAM
def PVTfree():
#========================================================================
# Main Routine: Parses the User Dataset
#========================================================================
iERR, clsIO = checkInputFile()
if iERR < 0: return iERR
#--------------------------------------------------------------------
# Dictionaries to Hold Classes of Samples and Experiments
# Dictionary of Regression Classes is held locally
#--------------------------------------------------------------------
dicSAM = {}
dicEXP = {}
#-- Initialise the Units class --------------------------------------
clsUNI = UN.classUnits()
#---------------------------------------------------------------------
# Get Machine Epsilon
#---------------------------------------------------------------------
macEPS = calcMacEPS()
CO.macEPS = macEPS #-- Over-write the value set in constants.py
#---------------------------------------------------------------------
# Parse Input File Line by Line
#---------------------------------------------------------------------
fInP = clsIO.fInP
fOut = clsIO.fOut
iCnt = 0
with fInP:
for curL in fInP:
iCnt += 1
#-- Current Line in curL; split into List tokS ----------------------
tokS = curL.split()
nTok = len(tokS)
#-- Blank or Comment? -----------------------------------------------
if nTok == 0: pass #-- Blank line
elif tokS[0][:2] == "--":
pass #-- Comment!
#-- Initial Section -------------------------------------------------
elif tokS[0][:4].upper() == "INIT":
iERR, clsEOS, dicSAM = readInit(clsIO, dicSAM, clsUNI)
if iERR < 0: break
#-- Is this a DEF/ENDDEF fluid definition? --------------------------
elif tokS[0][:3].upper() == "DEF":
iERR, clsEOS, dicSAM = readDef(clsIO, dicSAM, clsUNI)
if iERR < 0: break
#-- Read Experiments Definitions ------------------------------------
elif tokS[0].upper() == "EXP":
iERR, dicEXP = RX.readExps(clsIO, clsEOS, dicSAM, dicEXP,
clsUNI)
if iERR < 0: break
#-- Read Regression Definitions -------------------------------------
elif tokS[0].upper() == "REG":
iERR,clsEOS,dicSAM,dicEXP = \
RR.readReg(clsIO,clsEOS,dicSAM,dicEXP,clsUNI)
if iERR < 0: break
#-- Read Grouping Definitions ---------------------------------------
elif tokS[0][:2].upper() == "GR":
EOS = clsEOS.EOS
clsEOSG = classEoS(EOS) #-- New Class
dicSAMG = {} #-- New Dictionary
iERR,clsEOS,dicSAM,dicEXP = \
RG.readGroup(clsIO,clsEOS,clsEOSG,dicSAM,dicSAMG,dicEXP,clsUNI)
if iERR < 0: break
#-- Read Blackoil Definitions ---------------------------------------
elif tokS[0][:2].upper() == "BL":
#clsIO.fSim = clsIO.rNam + "_BO.sim"
iERR = RB.readBlack(clsIO, clsEOS, dicSAM, clsUNI)
if iERR < 0: break
#-- Read Compositional Definitions ----------------------------------
elif tokS[0][:2].upper() == "CO":
clsIO.fSim = clsIO.rNam + "_EOS.sim"
iERR = RC.readComp(clsEOS, dicSAM, clsIO, clsUNI)
if iERR < 0: break
#-- Read DEBUG controls ---------------------------------------------
elif tokS[0][:3].upper() == "DEB":
iERR = RE.readDebug(clsIO)
if iERR < 0: break
#-- Read TITLE1 -----------------------------------------------------
elif tokS[0].upper() == "TITLE1":
clsIO.Tit1 = buildTitle(tokS)
#-- Read TITLE2 -----------------------------------------------------
elif tokS[0].upper() == "TITLE2":
clsIO.Tit2 = buildTitle(tokS)
#-- Read TITLE3 -----------------------------------------------------
elif tokS[0].upper() == "TITLE3":
clsIO.Tit3 = buildTitle(tokS)
#-- Temporary STOP Card ---------------------------------------------
elif tokS[0].upper() == "STOP":
break
else:
pass
#== Close All Output Files =============================================
closeFiles(clsIO)
#== Return the Error Flag ==============================================
return iERR