def main():
counts = [0, 0, 0]
spacings = [10, 10, 10]
rotations = [0, 0, 0]
counts[0] = rs.GetInteger("number in x direction", minimum=1)
# counts[1] = rs.GetInteger("number in y direction", minimum=1)
# counts[2] = rs.GetInteger("number in z direction", minimum=1)
spacings[0] = rs.GetReal("x spacing")
# spacings[1] = rs.GetReal("y spacing")
# spacings[2] = rs.GetReal("z spacing")
rotations[0] = rs.GetReal("rotation of each object along x axis")
# rotations[1] = rs.GetReal("y spacing")
# rotations[2] = rs.GetReal("z spacing")
print "count", counts
print "spacing", spacings
print "rotation", rotations
for ix in range(counts[0]):
newobj = rs.CopyObject(obj, [spacings[0] * ix, 0, 0])
bbox = rs.BoundingBox(newobj)
if bbox:
centroid = rs.PointSubtract(bbox[0], bbox[6])
print bbox[6], bbox[0]
print centroid
rs.AddPoint(centroid)
else:
print "no bbox"
def DrawParametricCurve(parametric_equation):
"Create a interpolated curve based on a parametric equation."
# Get the minimum parameter
t0 = rs.GetReal("Minimum t value", 0.0)
if( t0==None ): return
# Get the maximum parameter
t1 = rs.GetReal("Maximum t value", 1.0)
if( t1==None ): return
# Get the number of sampling points to interpolate through
count = rs.GetInteger("Number of points", 50, 2)
if count<1: return
arrPoints = list()
#Get the first point
point = parametric_equation(t0)
arrPoints.append(point)
#Get the rest of the points
for x in xrange(1,count-2):
t = (1.0-(x/count))*t0 + (x/count)*t1
point = parametric_equation(t)
arrPoints.append(point)
#Get the last point
point = parametric_equation(t1)
arrPoints.append(point)
#Add the curve
rs.AddInterpCurve(arrPoints)
def meshfunction_xy():
zfunc, domain, resolution = loadfunctiondata()
zfunc = rs.StringBox( zfunc, "Specify a function f(x,y[,D,A])", "Mesh function")
if not zfunc: return
while True:
prompt = "Function domain x{%f,%f} y{%f,%f} @%d" % (domain[0], domain[1], domain[2], domain[3], resolution)
result = rs.GetString(prompt, "Insert", ("xMin","xMax","yMin","yMax","Resolution","Insert"))
if not result: return
result = result.upper()
if result=="XMIN":
f = rs.GetReal("X-Domain start", domain[0])
if f is not None: domain[0]=f
elif result=="XMAX":
f = rs.GetReal("X-Domain end", domain[1])
if f is not None: domain[1]=f
elif result=="YMIN":
f = rs.GetReal("Y-Domain start", domain[2])
if f is not None: domain[2]=f
elif result=="YMAX":
f = rs.GetReal("Y-Domain end", domain[3])
if f is not None: domain[3]=f
elif result=="RESOLUTION":
f = rs.GetInteger("Resolution of the graph", resolution)
if f is not None: resolution=f
elif result=="INSERT": break
verts = createmeshvertices(zfunc, domain, resolution)
faces = createmeshfaces(resolution)
rs.AddMesh(verts, faces)
def DistributeCirclesOnSphere():
sphere_radius = rs.GetReal("Radius of sphere", 10.0, 0.01)
if not sphere_radius: return
circle_radius = rs.GetReal("Radius of packing circles",
0.05 * sphere_radius, 0.001,
0.5 * sphere_radius)
if not circle_radius: return
vertical_count = int((math.pi * sphere_radius) / (2 * circle_radius))
rs.EnableRedraw(False)
phi = -0.5 * math.pi
phi_step = math.pi / vertical_count
while phi < 0.5 * math.pi:
horizontal_count = int((2 * math.pi * math.cos(phi) * sphere_radius) /
(2 * circle_radius))
if horizontal_count == 0: horizontal_count = 1
theta = 0
theta_step = 2 * math.pi / horizontal_count
while theta < 2 * math.pi - 1e-8:
circle_center = (sphere_radius * math.cos(theta) * math.cos(phi),
sphere_radius * math.sin(theta) * math.cos(phi),
sphere_radius * math.sin(phi))
circle_normal = rs.PointSubtract(circle_center, (0, 0, 0))
circle_plane = rs.PlaneFromNormal(circle_center, circle_normal)
rs.AddCircle(circle_plane, circle_radius)
theta += theta_step
phi += phi_step
rs.EnableRedraw(True)
def RunCommand(is_interactive):
"""Interactive Rhino Command Creates 90 Lap joint on a seleceted Beam
Return:
------
None
"""
#load Derivation and model
derivation = Derivation.from_json(rhino_UI_utilities.get_json_file_location())
model = derivation.get_next_step()
#Select mesh
Obj_ref = rs.GetObject(message = "select mesh(es)", filter = 32, preselect = False, subobjects = True)
selected_beam_name = (rs.ObjectName(Obj_ref)[:-5])
#Loop through all beams in model to identify the selected beam
selected_beam = None
for beam in model.beams:
if(beam.name == selected_beam_name):
selected_beam = beam
break
assert (selected_beam != None)
#list of user inputs(face needs to be implemented through UI)
face_id = rs.GetInteger("face_id",None,0,5)
helper = UI_helpers()
joint_point = helper.Get_SelectPointOnMeshEdge("Select mesh edge","Pick point on edge")
ext_start = rs.GetReal("extension start ",200,None,None)
ext_end = rs.GetReal("extension end ",200,None,None)
name = create_id()
#adding joints to selected Beam
#joint_distance_from_start = Get_distancefromBeamYZFrame(selected_beam,joint_point)
joint_distance_from_start = selected_beam.Get_distancefromBeamYZFrame(joint_point)
match_beam_origin = model.rule_90lap(selected_beam,joint_distance_from_start,face_id,ext_start,ext_end,name)
#Save Derivation (Model is also saved)
derivation.to_json(rhino_UI_utilities.get_json_file_location(), pretty = True)
#Visualization
viz_point = []
for pt in match_beam_origin:
a = (pt[0],pt[1],pt[2])
viz_point.append({
'pos': a,
'color': (0,255,0)
})
#Visualization
artist = MeshArtist(None, layer ='BEAM::Beams_out')
artist.clear_layer()
artist.draw_points(viz_point)
for beam in model.beams:
artist = MeshArtist(beam.mesh, layer ='BEAM::Beams_out')#.mesh is not ideal fix in beam and assemble class
artist.draw_faces(join_faces=True)
def Main():
crvs = rs.GetObjects("please select curves", rs.filter.curve)
paths = rs.GetObjects("please select depression paths", rs.filter.curve)
startPt = rs.GetObject("please select entry point", rs.filter.point)
radius = rs.GetReal("please enter path radius", .1)
power = rs.GetReal("please enter standard dev", .5)
crvs = depressCrvs(crvs, paths, startPt, radius, power)
return crvs
def RunCommand(is_interactive):
global params
center = rs.GetPoint(message="Select center point")
n = rs.GetInteger(message="Number of teeth", number=params["n"], minimum=4)
r = rs.GetReal(message="Outside Diameter", number=params["r"])
m = rs.GetReal(message="Gear module", number=params["m"])
pa = rs.GetReal(message="Pressure angle",
number=params["pa"],
minimum=0,
maximum=45)
bool_opts = rs.GetBoolean(message="Output options",
items=(("PitchCircle", "No", "Yes"), ),
defaults=(params["pc"], ))
if None in [center, n, m, pa, bool_opts]:
return 1 # Cancel
pc = bool_opts[0]
params["n"] = n
params["m"] = m
params["r"] = r
params["pa"] = pa
params["pc"] = pc
cplane = rs.ViewCPlane() # Get current CPlane
cplane = rs.MovePlane(cplane, center)
xform = rs.XformChangeBasis(cplane, rs.WorldXYPlane())
rs.EnableRedraw(False)
old_plane = rs.ViewCPlane(plane=rs.WorldXYPlane())
gear = generate_gear_crv_with_outside(teeth=params["n"],
module=params["m"],
outside_diam=params["r"],
pressure_angle=params["pa"])
rs.ViewCPlane(plane=old_plane)
rs.TransformObjects(gear, xform)
rs.EnableRedraw(True)
if pc:
circle = generate_pitch_circle_crv(teeth=params["n"],
module=params["m"])
rs.TransformObjects(circle, xform)
rs.SelectObjects([gear, circle])
else:
rs.SelectObjects(gear)
return 0 # Success
def Main():
crvs = rs.GetObjects("please select srf curves", rs.filter.curve)
paths = rs.GetObjects("please select depression paths", rs.filter.curve)
startPt = rs.GetObject("please select entry point", rs.filter.point)
radius = rs.GetReal("please enter path radius", 2)
sd = rs.GetReal("please enter standard dev", .25)
srf = rs.GetObject("please enter surface", rs.filter.surface)
crvs = depressCrvs(srf, crvs, paths, startPt, radius, sd)
return crvs
def testDuplications():
print("\n testDuplications commands \n")
obj_ids = rs.GetObjects(
"Select object(s) from which to create the rectangular matrix", 0,
True, True)
if obj_ids is None: return
box = rs.BoundingBox(obj_ids)
if not isinstance(box, list): return
origin = rs.PointDivide(rs.PointAdd(box[0], box[6]), 2)
nXdups = rs.GetInteger("Duplications X", 1, 1)
rXdups = rs.GetReal("Duplications X rand", 0, 0, 100) / 100
nYdups = rs.GetInteger("Duplications Y", 1, 1)
rYdups = rs.GetReal("Duplications Y rand", 0, 0, 100) / 100
nZdups = rs.GetInteger("Duplications Z", 1, 1)
rZdups = rs.GetReal("Duplications Z rand", 0, 0, 100) / 100
rKeep = 1 - rs.GetReal("Percent to erase", 0, 0, 100) / 100
endpt = rs.GetPoint("To point")
calc_val_real = lambda val, rand: val + random.uniform(
-rand * val, rand * val)
calc_val_int = lambda val, rand: val + int(
round(random.uniform(-rand * val, rand * val)))
xspace = 3
yspace = 3
zspace = 3
xdups = calc_val_int(nXdups, rXdups)
ydups = calc_val_int(nYdups, rYdups)
zdups = calc_val_int(nZdups, rZdups)
translations = []
# Copy Points with Spacing
for k in range(zdups):
for j in range(ydups):
for i in range(xdups):
newpt = [
origin[0] + i * xspace, origin[1] + j * yspace,
origin[2] + k * zspace
]
translations = translations + [rs.VectorCreate(endpt, newpt)]
nObjs = len(translations)
print(nObjs)
objs_to_keep = random.sample(range(nObjs), int(round(nObjs * rKeep)))
translations = [translations[i] for i in objs_to_keep]
copied_objs = []
for tr in translations:
copied_objs = copied_objs + rs.CopyObjects(obj_ids, tr)
def set_target_areas(area_dict):
go = Rhino.Input.Custom.GetOption()
go.SetCommandPrompt("Enter target areas")
# face key -----------------------------------------------------------------
sortedkeys = sorted(area_dict.keys())
key_strings = [str("key_" + str(key)) for key in sortedkeys]
fkey_index = 0
key_list = go.AddOptionList("pick_face", ["All"] + key_strings, fkey_index)
# assign new target areas --------------------------------------------------
new_area_dict = deepcopy(area_dict)
while True:
opt = go.Get()
if go.CommandResult() != Rhino.Commands.Result.Success:
break
elif opt == Rhino.Input.GetResult.Option: # keep picking options
if go.OptionIndex() == key_list:
fkey_index = int(go.Option().CurrentListOptionIndex)
if fkey_index == 0:
avg = sum(area_dict.values()) / len(area_dict)
target_area = rs.GetReal("Enter target area for ALL faces",
avg, 0, 1000.0)
if target_area:
for key in new_area_dict:
new_area_dict[key] = target_area
else:
fkey_key = sortedkeys[fkey_index - 1]
current_area = area_dict[fkey_key]
target_area = rs.GetReal("Enter target area value",
current_area, 0, 1000.0)
if target_area:
new_area_dict[fkey_key] = target_area
# print current targets --------------------------------------------
print(
'-----------------------------------------------------------')
for fkey in new_area_dict:
print("face", fkey, "has target area of :",
new_area_dict[fkey])
print(
'-----------------------------------------------------------')
continue
break
return new_area_dict
def RunCommand(is_interactive):
global params
pitch_line = rs.GetObject(message="Select pitch line",
filter=rs.filter.curve,
preselect=True)
if pitch_line is None:
return 1 # Cancel
if not rs.IsLine(pitch_line):
print "Selected curve is not a line!"
return 1 # Cancel
rs.SelectObjects(pitch_line)
m = rs.GetReal(message="Rack module", number=params["m"])
pa = rs.GetReal(message="Pressure angle",
number=params["pa"],
minimum=0,
maximum=45)
if m is None or pa is None:
return 1 # Cancel
params["m"] = m
params["pa"] = pa
pitch_line_center = rs.CurveMidPoint(pitch_line)
pitch_line_start = rs.CurveStartPoint(pitch_line)
pitch_line_end = rs.CurveEndPoint(pitch_line)
angle, reflex_angle = rs.Angle2(line1=((0, 0, 0), (1, 0, 0)),
line2=(pitch_line_start, pitch_line_end))
x_vector = rs.VectorCreate(pitch_line_end, pitch_line_start)
y_vector = rs.VectorRotate(x_vector, 90.0, [0, 0, 1])
cplane = rs.PlaneFromFrame(origin=pitch_line_center,
x_axis=x_vector,
y_axis=y_vector)
xform = rs.XformChangeBasis(cplane, rs.WorldXYPlane())
rs.EnableRedraw(False)
old_plane = rs.ViewCPlane(plane=rs.WorldXYPlane())
rack = draw_rack(length=rs.CurveLength(pitch_line),
module=params["m"],
pressure_angle=params["pa"])
rs.ViewCPlane(plane=old_plane)
rs.TransformObjects(rack, xform)
rs.EnableRedraw(True)
rs.UnselectAllObjects()
rs.SelectObjects(rack)
return 0 # Success
def MakeStair_Button():
tol = rs.UnitAbsoluteTolerance()
objs = rs.GetObjects("Select guide path")
if objs is None: return
height = rs.GetReal("Stair Height", number=120)
if height is None: return
width = rs.GetReal("Stair Width", number=30)
if width is None: return
for obj in objs:
MakeStair(obj, width, height)
def Main():
mesh = rs.GetObject("please select mesh", rs.filter.mesh)
src = rs.GetObject("please select path", rs.filter.curve)
ang = rs.GetReal("please enter angle", 20)
length = rs.GetReal("please enter length", 8)
gen = rs.GetInteger("please enter number of generations", 4)
end = rs.CurveEndPoint(src)
start = rs.CurveStartPoint(src)
vec = rs.VectorCreate(end, start)
vec = rs.VectorUnitize(vec)
vec = vec * length
tree = vine(mesh, start, vec, ang)
for i in range(gen):
tree.grow()
def main():
path = rs.GetObject("Select Ramp Path", rs.filter.curve, True)
if path is None: return
if 'ramp-widthDefault' in sc.sticky:
widthDefault = sc.sticky['ramp-widthDefault']
else:
widthDefault = 36
if 'ramp-slopeDefault' in sc.sticky:
slopeDefault = sc.sticky['ramp-slopeDefault']
else:
slopeDefault = 8.333
width = rs.GetReal("Ramp Clear Width", widthDefault, minimum=36)
if width is None: return
slope = rs.GetReal("Ramp slope (e.g. 8.33%(1:12) is 8.33)", slopeDefault)
if slope is None: return
sc.sticky['ramp-widthDefault'] = width
sc.sticky['ramp-slopeDefault'] = slope
rs.EnableRedraw(False)
rampGeoList = Ramp_HeightSlope(path, width, slope / 100)
try:
layers.AddLayerByNumber(402, False)
layerName = layers.GetLayerNameByNumber(402)
rs.ObjectLayer(rampGeoList[0], layerName)
try:
if rampGeoList[2] is not None:
layers.AddLayerByNumber(106, False)
layerName = layers.GetLayerNameByNumber(106)
rs.ObjectLayer(rampGeoList[2], layerName)
except:
pass
result = True
except:
result = False
utils.SaveFunctionData('Architecture-ramp', [
width, slope,
str([(pt.X, pt.Y, pt.Z) for pt in rs.CurveEditPoints(path)]), result
])
rs.EnableRedraw(True)
print rampGeoList[1]
utils.SaveToAnalytics('architecture-ramp')
def main():
cyls = []
radius = 0
gname = "Enclosure"
extantGroups = rs.GroupNames()
print "groups: ", extantGroups
enclosures = [s for s in extantGroups if "Enclosure" in s]
print "enclosures: ", enclosures
if rs.IsGroup("Enclosure"):
num = len(enclosures)
gname += "_" + ` num `
encGroup = rs.AddGroup(gname)
print "group: ", encGroup
focus = rs.GetPoint("center of fence")
if (focus is None): return
rpt = rs.GetPoint("enclosure radius", focus)
if (rpt is None): return
else:
radius = (rpt - focus).Length
rs.AddObjectsToGroup(rs.AddCircle(focus, radius), encGroup)
count = rs.GetInteger("number of cylinders")
if (count is None): return
cyldiam = rs.GetReal("cylinder diameter")
if (cyldiam is None): return
minheight = rs.GetReal("minimum height")
if (minheight is None): return
maxheight = rs.GetReal("maximum height")
if (maxheight is None): return
# arcjitter = rs.GetReal("amount of arc jitter")
# if (arcjitter is None): return
# radialjitter = rs.GetReal("amount of radial jitter")
# if (radialjitter is None): return
for i in range(count):
cyl = rs.AddCylinder(rpt, random.uniform(minheight, maxheight),
cyldiam / 2, True)
rs.RotateObject(cyl, focus, (360 / count) * (i + 1))
cyls.append(cyl)
if cyls: rs.AddObjectsToGroup(cyls, encGroup)
print "Enclosure built:"
print "focus: (", focus, ")"
print "radius:", radius
print "cylinders:", count, "ranging from", minheight, "to", maxheight, "units in length."
def Main():
try:
data_name = "Rect2DogBone"
curves = rs.GetObjects("Rectangle curve", rs.filter.curve, True, True)
diam = rs.GetInteger(
"DogBone circle diameter",
16 if not rs.GetDocumentData(data_name, "diam_external") else
float(rs.GetDocumentData(data_name, "diam_external")))
diam_barrenos = rs.GetInteger(
"Circle at centroid (0=None -1=Point n=Diameter)",
0 if not rs.GetDocumentData(data_name, "diam_barrenos") else float(
rs.GetDocumentData(data_name, "diam_barrenos")))
tol = float(
rs.GetReal(
"External offset",
0 if not rs.GetDocumentData(data_name, "tolerance") else float(
rs.GetDocumentData(data_name, "tolerance"))))
if curves and diam:
rs.EnableRedraw(False)
dogbone(curves, diam, diam_barrenos, tol)
rs.SetDocumentData(data_name, "diam_external", str(diam))
rs.SetDocumentData(data_name, "diam_barrenos", str(diam_barrenos))
rs.SetDocumentData(data_name, "tolerance", str(tol))
rs.EnableRedraw(True)
print("%s DogBones created" % len(curves))
except Exception as e:
print("Error: %s" % e)
def duplicateAndRotate():
obj_ids = rs.GetObjects("Select object(s) to duplicate and rotate", 0,
True, True)
if obj_ids is None: return
box = rs.BoundingBox(obj_ids)
if not isinstance(box, list): return
origin = rs.PointDivide(rs.PointAdd(box[0], box[6]), 2)
endpt = rs.GetPoint("To point")
ndups = rs.GetInteger("Number of duplications")
maxd = rs.GetReal("Max Distance")
translation = rs.VectorCreate(endpt, origin)
for i in range(0, ndups, 1):
xr = random() if random() < 0.5 else -1 * random()
yr = random() if random() < 0.5 else -1 * random()
zr = random() if random() < 0.5 else -1 * random()
newpt = [xr * maxd, yr * maxd, zr * maxd]
translation1 = rs.VectorCreate(endpt, newpt)
translation2 = rs.VectorCreate(translation1, origin)
copied_obj_ids = rs.CopyObjects(obj_ids, translation2)
xyp = rs.WorldXYPlane()
rs.RotateObjects(copied_obj_ids, newpt, random() * 360, xyp[0])
rs.RotateObjects(copied_obj_ids, newpt, random() * 360, xyp[1])
rs.RotateObjects(copied_obj_ids, newpt, random() * 360, xyp[2])
def createSphere():
sphereRadius = rs.GetReal(message='Of what radius? ', minimum=0.1)
x, y, z = [float(n) for n in raw_input('where?: "x y z"').split()]
id = rs.AddSphere((x, y, z), sphereRadius)
spheres.append(id)
rs.SetUserText(id, key="Sphere", value=str(len(spheres)))
print('Done.')
def ChamferButton():
objs = rs.GetObjects("Select curves to chamfer", preselect=True)
if objs is None: return
dist1 = rs.GetReal('Distance 1', 30)
if dist1 is None: return
dist2 = rs.GetReal('Distance 2', 60)
if dist2 is None: return
finalCurves = []
for obj in objs:
rhobj = rs.coercecurve(obj)
finalCurves.append(ChamferCurve(rhobj, dist1, dist2))
rs.DeleteObject(obj)
return finalCurves
def RunCommand(is_interactive):
#load Derivation and model
derivation = Derivation.from_json(
rhino_UI_utilities.get_json_file_location())
model = derivation.get_next_step()
#user input
rc, corners = Rhino.Input.RhinoGet.GetRectangle()
if rc != Rhino.Commands.Result.Success:
return rc
plane = Rhino.Geometry.Plane(corners[0], corners[1], corners[2])
beam_frame = Frame(plane[0], plane[1], plane[2])
length = rs.GetReal("length", 4000, 300, None)
#Generate unique name for the Beam
name = create_id()
#Create Beam
model.rule_create_beam(beam_frame, length, 100, 100, name)
#Save Derivation (Model is also saved)
derivation.to_json(rhino_UI_utilities.get_json_file_location(),
pretty=True)
#Visualization
artist = MeshArtist(None, layer='BEAM::Beams_out')
artist.clear_layer()
for beam in model.beams:
artist = MeshArtist(
beam.mesh, layer='BEAM::Beams_out'
) #.mesh is not ideal fix in beam and assemble class
artist.draw_faces(join_faces=True)
return 0
def blendcorners():
polyline_id = rs.GetObject("Polyline to blend", 4, True, True)
if not polyline_id: return
vertices = rs.PolylineVertices(polyline_id)
if not vertices: return
radius = rs.GetReal("Blend radius", 1.0, 0.0)
if radius is None: return
between = lambda a, b: (a + b) / 2.0
newverts = []
for i in range(len(vertices) - 1):
a = vertices[i]
b = vertices[i + 1]
segmentlength = rs.Distance(a, b)
vec_segment = rs.PointSubtract(b, a)
vec_segment = rs.VectorUnitize(vec_segment)
if radius < (0.5 * segmentlength):
vec_segment = rs.VectorScale(vec_segment, radius)
else:
vec_segment = rs.VectorScale(vec_segment, 0.5 * segmentlength)
w1 = rs.PointAdd(a, vec_segment)
w2 = rs.PointSubtract(b, vec_segment)
newverts.append(a)
newverts.append(between(a, w1))
newverts.append(w1)
newverts.append(between(w1, w2))
newverts.append(w2)
newverts.append(between(w2, b))
newverts.append(vertices[len(vertices) - 1])
rs.AddCurve(newverts, 5)
rs.DeleteObject(polyline_id)
def main():
heightRel2FFL = rs.GetReal("Cut level (relative to FFL):", number=1)
levelsElev = setLevels.getFloorLevels()
rs.EnableRedraw(False)
deleteExistingPlans()
heights = []
for leveli in levelsElev:
heights.append(leveli + heightRel2FFL)
layers = rs.GetLayers()
if layers is None:
return
layersToCut = []
for layer in layers:
if rs.LayerVisible(layer):
layersToCut.append(layer)
for i in range(0, len(heights)):
for layer in layersToCut:
rs.CurrentLayer(layer)
if i < 9:
levelNum = "0" + str(i + 1)
else:
levelNum = str(i + 1)
cutAtPlan(heights[i], levelNum)
rs.EnableRedraw(True)
return None
def innerPanel():
objs = rs.GetObjects("Select objects to add frame to", filter = 24, group = True,preselect = True)
if objs is None:
return
dist = rs.GetReal("Offset Distance")
if dist is None:
return
rs.EnableRedraw(False)
srfs = []
for obj in objs:
if rs.IsPolysurface(obj):
srfs = srfs + rs.ExplodePolysurfaces(obj)
else:
srfs.append(rs.CopyObject(obj))
for srf in srfs:
if rs.IsSurfacePlanar(srf):
edgeCrvs = rs.DuplicateEdgeCurves(srf)
border = rs.JoinCurves(edgeCrvs, True)
innerEdge = rs.OffsetCurveOnSurface(border, srf, dist)
#rs.SplitBrep(srf, innerEdge)
rs.AddPlanarSrf(innerEdge)
rs.DeleteObject(innerEdge)
rs.DeleteObject(border)
else:
print "A surface was not planar"
rs.DeleteObjects(srfs)
rs.EnableRedraw(True)
def createcurvaturegraph():
curve_ids = rs.GetObjects("Curves for curvature graph", 4, False, True,
True)
if not curve_ids: return
samples = 10
scale = 1.0
preview = []
while True:
rs.EnableRedraw(False)
for p in preview:
rs.DeleteObjects(p)
preview = []
for id in curve_ids:
cg = addcurvaturegraph(id, samples, scale)
preview.append(cg)
rs.EnableRedraw(True)
result = rs.GetString("Curvature settings", "Accept",
("Samples", "Scale", "Accept"))
if not result:
for p in preview:
rs.DeleteObjects(p)
break
result = result.upper()
if result == "ACCEPT": break
elif result == "SAMPLES":
numsamples = rs.GetInteger("Number of samples per knot-span",
samples, 3, 100)
if numsamples: samples = numsamples
elif result == "SCALE":
sc = rs.GetReal("Scale of the graph", scale, 0.01, 1000.0)
if sc: scale = sc
def divide_curve():
# get user input
res, obj_refs = RhinoGet.GetMultipleObjects("Curves to divide",
False, ObjectType.EdgeFilter | ObjectType.Curve)
if res <> Result.Success: return res
curves = [obj_ref.Curve() for obj_ref in obj_refs]
distance_between_divisions = rs.GetReal(
message = "Distance between divisions",
number = 5.0, minimum = 1.0)
if distance_between_divisions == None: return
# generate the points
points = []
for curve in curves:
t0 = curve.Domain.Min
points.append(curve.PointAt(t0))
sphere_center = curve.PointAt(t0)
t = t0
rest_of_curve = curve
while True:
sphere = Sphere(sphere_center, distance_between_divisions)
b, overlapCurves, intersectPoints = Intersection.CurveBrep(
rest_of_curve, sphere.ToBrep(), 0.0)
if b == False or (overlapCurves.Length == 0 and intersectPoints.Length == 0):
break
t, point = nextIntersectParamAndPoint(
overlapCurves, intersectPoints, rest_of_curve)
points.append(point)
sphere_center = point
rest_of_curve = curve.Split(t)[1]
rs.AddPoints(points)
rs.Redraw()
def OffsetMulticrvs2SidesWEnds():
#user input section
msg = "Select planar curve(s) to offset both sides"
crvs = rs.GetObjects(msg, 4, preselect=True, custom_filter=plcrv_filt)
if not crvs: return
tol = sc.doc.ModelAbsoluteTolerance
t_choice = ["Sharp", "Round", "Smooth", "Chamfer"]
e_choice = ["None", "Straight", "Arc", "OffsetStraight"]
#Get previous settings
if "OffsetCrvs_Dist" in sc.sticky: old_dist = sc.sticky["OffsetCrvs_Dist"]
else: old_dist = 1.0
if "OffsetCrvs_TChoice" in sc.sticky:
old_trans = sc.sticky["OffsetCrvs_TChoice"]
else:
old_trans = "Sharp"
if "OffsetCrvs_EChoice" in sc.sticky:
old_ends = sc.sticky["OffsetCrvs_EChoice"]
else:
old_ends = "None"
off_dist = rs.GetReal("Distance to offset", old_dist, tol)
if not off_dist: return
trans_type = rs.GetString("Offset transition?", old_trans, t_choice)
if not trans_type: return
if trans_type == "Sharp": tt = 1
elif trans_type == "Round": tt = 2
elif trans_type == "Smooth": tt = 3
elif trans_type == "Chamfer": tt = 4
else: return
end_type = rs.GetString("End connection type?", old_ends, e_choice)
if not end_type: return
if end_type == "None": conn = -1
elif end_type == "Straight": conn = 0
elif end_type == "Arc": conn = 1
elif end_type == "OffsetStraight": conn = 2
else: return
rs.EnableRedraw(False)
rs.UnselectAllObjects
count = 0
for crv in crvs:
success = OffsetCurve2Sides(crv, off_dist, tt, conn, tol)
if success: count += 1
if count < len(crvs):
err_msg = " Unable to offset {} curves".format(len(crvs) - count)
else:
err_msg = ""
print "Successfully offset {} curves.".format(count) + err_msg
#Set preferences
sc.sticky["OffsetCrvs_Dist"] = off_dist
sc.sticky["OffsetCrvs_TChoice"] = trans_type
sc.sticky["OffsetCrvs_EChoice"] = end_type
def createCone():
coneRadius = rs.GetReal(message='Of what radius? ', minimum=0.1)
x1, y1, z1 = [float(n) for n in raw_input('From where?: "x y z"').split()]
x2, y2, z2 = [float(n) for n in raw_input('To where?: "x y z"').split()]
id = rs.AddCone((x1, y1, z1), (x2, y2, z2), coneRadius, cap=True)
cones.append(id)
rs.SetUserText(id, key="Cone", value=str(len(cones)))
print('Done.')
def Main():
mesh=rs.GetObjects("select mesh",rs.filter.mesh)
start=rs.GetObject("select start points",rs.filter.point)
refVec = rs.GetObject("select crv direction",rs.filter.curve)
ang=rs.GetReal("enter branching angle",30)
length=rs.GetReal("enter branch length",15)
gen=rs.GetInteger("enter number of generations",3)
lines=rs.AddLayer("branch",[255,0,0])
rs.EnableRedraw(False)
rs.CurrentLayer(lines)
vec=tanVec(refVec,start)
centers=rs.MeshFaceCenters(mesh)
index=rs.PointArrayClosestPoint(centers,start)
norm=rs.MeshFaceNormals(mesh)[index]
vec=rs.VectorRotate(vec,0,norm)
branches=baseBranch(mesh,start,vec,ang,length,gen)
return branches
def RunCommand(is_interactive):
ringSize = rs.GetReal("Ring size", 8.5, 0, 16)
center = rs.GetPoint("Location")
plane = rs.MovePlane(rs.ViewCPlane(), center)
radius = (11.63 + 0.8128 * ringSize) * 0.5
objId = rs.AddCircle(plane, radius)
rs.SelectObject(objId)
def GetFracture ():
dx = rs.GetReal("Enter x-axis direction:")
if not dx:
dx = 0.0
print "x-axis direction: ", dx
objs = rs.ObjectsByType(8,False)
cir_objs = rs.ObjectsByType(4)
#delete all circles
for cur_obj in cir_objs:
if rs.IsCircle(cur_obj):
rs.DeleteObject(cur_obj)
occor = []
radius = []
center = []
#for all surface
for obj in objs:
rs.UnselectAllObjects()
rs.SelectObject(obj)
rs.Command ("_Silhouette")
created_objs = rs.LastCreatedObjects()
#not a circle
if len(created_objs) !=1:
rs.DeleteObjects(created_objs)
print "unvailded surface"
continue
created_objs = created_objs[0]
#not a circle
if not rs.IsCircle(created_objs):
rs.DeleteObject(created_objs)
print "unvailded surface, not circle"
continue
point = rs.CircleCenterPoint(created_objs)
center.append(point)
r = rs.CircleRadius(created_objs)
radius.append(r)
normal = rs.SurfaceNormal(obj,[0,0])
occor.append(GetDirDip(normal,dx))
rs.DeleteObject(created_objs)
print center
print occor
print radius
path = rs.DocumentPath()
path_l = path.split("\\")
path_l[len(path_l)-1] = "fracture.dat"
file = open("\\".join(path_l),"w")
file.write(str(len(occor)))
file.write('\n')
for i in range (len(occor)):
file.write("%.15f " % center[i][0])
file.write("%.15f " % center[i][1])
file.write("%.15f " % center[i][2])
file.write ("%.15f " % occor[i][0])
file.write ("%.15f " % occor[i][1])
file.write ("%.15f " % radius[i])
file.write ("0.0001 0.1 30\n")
file.close ()
