def _clear_groups(cls):
"""Deletes all groups
"""
groups = rs.GroupNames()
if groups:
for group in groups:
rs.DeleteGroup(group)
def clear_groups():
groups = rs.GroupNames()
if not groups:
print('No groups to clear')
groups = []
for group in groups:
group_deleted = rs.DeleteGroup(group)
print('%s deleted: %s' % (group, group_deleted))
def main():
cyls = []
radius = 0
gname = "Enclosure"
extantGroups = rs.GroupNames()
print "groups: ", extantGroups
enclosures = [s for s in extantGroups if "Enclosure" in s]
print "enclosures: ", enclosures
if rs.IsGroup("Enclosure"):
num = len(enclosures)
gname += "_" + ` num `
encGroup = rs.AddGroup(gname)
print "group: ", encGroup
focus = rs.GetPoint("center of fence")
if (focus is None): return
rpt = rs.GetPoint("enclosure radius", focus)
if (rpt is None): return
else:
radius = (rpt - focus).Length
rs.AddObjectsToGroup(rs.AddCircle(focus, radius), encGroup)
count = rs.GetInteger("number of cylinders")
if (count is None): return
cyldiam = rs.GetReal("cylinder diameter")
if (cyldiam is None): return
minheight = rs.GetReal("minimum height")
if (minheight is None): return
maxheight = rs.GetReal("maximum height")
if (maxheight is None): return
# arcjitter = rs.GetReal("amount of arc jitter")
# if (arcjitter is None): return
# radialjitter = rs.GetReal("amount of radial jitter")
# if (radialjitter is None): return
for i in range(count):
cyl = rs.AddCylinder(rpt, random.uniform(minheight, maxheight),
cyldiam / 2, True)
rs.RotateObject(cyl, focus, (360 / count) * (i + 1))
cyls.append(cyl)
if cyls: rs.AddObjectsToGroup(cyls, encGroup)
print "Enclosure built:"
print "focus: (", focus, ")"
print "radius:", radius
print "cylinders:", count, "ranging from", minheight, "to", maxheight, "units in length."
import rhinoscriptsyntax as rs
names = rs.GroupNames()
for group in names:
rs.HideGroup(group)
rs.Redraw()
def createTable(partlist):
if not "partlistgroup" in rs.GroupNames():
rs.AddGroup("partlistgroup")
#clean the group
group = sc.doc.Groups.FindName("partlistgroup")
objs = sc.doc.ActiveDoc.Groups.GroupMembers(group.Index)
rs.DeleteObjects(objs)
#rs.DeleteObjects
twidth = 100
def addTexts(texts, y):
for i, text in enumerate(texts):
if i == 0:
a = 6
just = Rhino.Geometry.TextJustification.BottomRight
elif i == 1:
a = 9.5
just = Rhino.Geometry.TextJustification.BottomLeft
else:
a = 14 + twidth
just = Rhino.Geometry.TextJustification.BottomRight
plane = Rhino.Geometry.Plane.WorldXY
plane.Origin = Rhino.Geometry.Point3d(a, y - 4, 0)
textobject = sc.doc.Objects.AddText(text, plane, 2.0,
'Courier New', False, False,
just)
rs.AddObjectToGroup(textobject, "partlistgroup")
def addBorders(i, y):
start = Rhino.Geometry.Point3d(0, y - 6, 0)
end = Rhino.Geometry.Point3d(16 + twidth, y - 6, 0)
line = sc.doc.Objects.AddLine(start, end) #bottom border
rs.AddObjectToGroup(line, "partlistgroup")
if i == 0:
#add top border
trans = Rhino.Geometry.Transform.Translation(0, 6, 0)
h_line = Rhino.Geometry.Line(start, end)
h_line.Transform(trans)
line = sc.doc.Objects.AddLine(h_line)
rs.AddObjectToGroup(line, "partlistgroup")
#add vertical lines
v_start = Rhino.Geometry.Point3d(0, y, 0)
v_end = Rhino.Geometry.Point3d(0, y - 6, 0)
v_line = Rhino.Geometry.Line(v_start, v_end)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(8, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(twidth, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(8, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
y = len(partlist) * 6
for i, texts in enumerate(partlist):
addTexts(texts, y)
addBorders(i, y)
y -= 6
#sc.doc.Views.Redraw()
group = sc.doc.Groups.FindName("partlistgroup")
objs = sc.doc.ActiveDoc.Groups.GroupMembers(group.Index)
rs.MoveObjects(objs, (10, 10, 0))
def clear_groups():
groups = rs.GroupNames()
if not groups:
print('No groups to clear')
groups = []
for group in groups:
group_deleted = rs.DeleteGroup(group)
print('%s deleted: %s' % (group, group_deleted))
g.Grammar.clear_all()
clear_groups()
print('Number of groups (GroupCount): %i' % rs.GroupCount())
## GroupCount seems to show the past, not the present
print('Groups: %s' % rs.GroupNames())
## GroupNames appears to show the present
names = rs.GroupNames()
if not names:
names = []
n_names = len(names)
print('Number of groups(len(GroupNames)): %i' % n_names)
group = 'kilroy'
group_out = rs.AddGroup(group)
print('New group: %s' % group_out)
print('Groups: %s' % rs.GroupNames())
print('%s is a group: %s' % (group_out, rs.IsGroup(group_out)))
print('%s is empty: %s' % (group_out, rs.IsGroupEmpty(group_out)))
## IsGroupEmpty appears to return IsGroupNonEmpty
p1, p2 = (0, 0, 0), (20, 20, 0)
line = rs.AddLine(p1, p2)
def create_table(partlist):
g = rs.GroupNames()
if not g or not "partlistgroup" in g:
rs.AddGroup("partlistgroup")
#clean the group
group = sc.doc.Groups.FindName("partlistgroup")
objs = sc.doc.ActiveDoc.Groups.GroupMembers(group.Index)
rs.DeleteObjects(objs)
#base table width on largest name
blocknames = get_block_names()
twidth = 3 + max(blocknames, key=len).Length * 2.1
desc = 3 + max(get_block_descriptions(blocknames), key=len).Length * 2.1
if desc < 3 + 5 * 2.1:
desc = 3 + 5 * 2.1
def addTexts(texts, y):
for i, text in enumerate(texts):
if i == 0:
a = 10
just = Rhino.Geometry.TextJustification.BottomRight
elif i == 1:
a = 13.5
just = Rhino.Geometry.TextJustification.BottomLeft
elif i == 2:
a = 13.5 + twidth
just = Rhino.Geometry.TextJustification.BottomLeft
else:
a = 20 + twidth + desc
just = Rhino.Geometry.TextJustification.BottomRight
plane = Rhino.Geometry.Plane.WorldXY
plane.Origin = Rhino.Geometry.Point3d(a, y - 4, 0)
textobject = sc.doc.Objects.AddText(text, plane, 2.0,
'Courier New', False, False,
just)
rs.AddObjectToGroup(textobject, "partlistgroup")
def get_partlist_alignment():
point = Rhino.Geometry.Point3d(0, 0, 0)
listValues = "LowerLeft", "LowerRight", "UpperLeft", "UpperRight"
listIndex = 1
gp = Rhino.Input.Custom.GetPoint()
gp.SetCommandPrompt("Choose alignment and insertion point")
opList = gp.AddOptionList("Alignment", listValues, listIndex)
while True:
get_rc = gp.Get()
if gp.CommandResult() != Rhino.Commands.Result.Success:
return point, 0
if get_rc == Rhino.Input.GetResult.Point:
point = gp.Point()
elif get_rc == Rhino.Input.GetResult.Option:
if gp.OptionIndex() == opList:
listIndex = gp.Option().CurrentListOptionIndex
continue
break
return point, listIndex
def add_borders(i, y):
start = Rhino.Geometry.Point3d(0, y - 6, 0)
end = Rhino.Geometry.Point3d(22 + twidth + desc, y - 6, 0)
line = sc.doc.Objects.AddLine(start, end) #bottom border
rs.AddObjectToGroup(line, "partlistgroup")
if i == 0:
#add top border
trans = Rhino.Geometry.Transform.Translation(0, 6, 0)
h_line = Rhino.Geometry.Line(start, end)
h_line.Transform(trans)
line = sc.doc.Objects.AddLine(h_line)
rs.AddObjectToGroup(line, "partlistgroup")
#add vertical lines
v_start = Rhino.Geometry.Point3d(0, y, 0)
v_end = Rhino.Geometry.Point3d(0, y - 6, 0)
v_line = Rhino.Geometry.Line(v_start, v_end)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(12, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(twidth, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(desc, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
trans = Rhino.Geometry.Transform.Translation(10, 0, 0)
v_line.Transform(trans)
line = sc.doc.Objects.AddLine(v_line)
rs.AddObjectToGroup(line, "partlistgroup")
y = len(partlist) * 6
#get insertion point
point, listIndex = get_partlist_alignment()
if point:
target = Rhino.Geometry.Point3d(0, 0, 0)
if listIndex == 0: #lower left
target[0] = point[0]
target[1] = point[1]
elif listIndex == 1: #lower right
target[0] = point[0] - (22 + twidth + desc)
target[1] = point[1]
elif listIndex == 2: #upper left
target[0] = point[0]
target[1] = point[1] - len(partlist) * 6
else: #upper right
target[0] = point[0] - (22 + twidth + desc)
target[1] = point[1] - len(partlist) * 6
for i, texts in enumerate(partlist):
addTexts(texts, y)
add_borders(i, y)
y -= 6
group = sc.doc.Groups.FindName("partlistgroup")
objs = sc.doc.ActiveDoc.Groups.GroupMembers(group.Index)
rs.MoveObjects(objs, (target))
import rhinoscriptsyntax as rs
rs.EnableRedraw(enable=False)
groups = rs.GroupNames()
selected = rs.SelectedObjects()
if groups:
for i, group in enumerate(groups):
objs = rs.ObjectsByGroup(group)
if objs:
objName = group + str(i)
block = rs.AddBlock(objs, (0, 0, 0), objName, True)
rs.InsertBlock(block, (0, 0, 0))
selected = rs.SelectedObjects()
for i in range(len(selected)):
obj = [selected[i]]
objName = str(rs.ObjectLayer(obj[0])) + str(i)
block = rs.AddBlock(obj, (0, 0, 0), objName, True)
rs.InsertBlock(block, (0, 0, 0))
rs.EnableRedraw(enable=True)