def get_devices():
device_store = []
device_uids, device_list = rktalk.list_devices()
for bus_id, dev_id, vendor_id, prod_id in device_list:
dev_name = '0x%04x:0x%04x' % (vendor_id, prod_id)
device_store.append((dev_name, (bus_id, dev_id, vendor_id, prod_id)))
return device_store
def get_devices():
device_store = []
device_uids, device_list = rktalk.list_devices()
for bus_id, dev_id, vendor_id, prod_id in device_list:
dev_name = '0x%04x:0x%04x' % (vendor_id, prod_id)
device_store.append(
(dev_name, (bus_id, dev_id, vendor_id, prod_id)))
return device_store
def __check_devices(self):
device_uids, device_list = rktalk.list_devices()
if device_uids != self.__device_uids:
self.__device_uids = device_uids
self.__device_liststore.clear()
for bus_id, dev_id, vendor_id, prod_id in device_list:
dev_name = '0x%04x:0x%04x' % (vendor_id, prod_id)
self.__device_liststore.append(
[dev_name, (bus_id, dev_id, vendor_id, prod_id)])
if len(device_list) == 1:
self.__device_selector.set_active(0)
self.__refresh_buttons()
return True
def __check_devices(self):
device_uids, device_list = rktalk.list_devices()
if device_uids != self.__device_uids:
self.__device_uids = device_uids
self.__device_liststore.clear()
for bus_id, dev_id, vendor_id, prod_id in device_list:
dev_name = '0x%04x:0x%04x' % (vendor_id, prod_id)
self.__device_liststore.append(
[dev_name, (bus_id, dev_id, vendor_id, prod_id)])
if len(device_list) == 1:
self.__device_selector.set_active(0)
self.__refresh_buttons()
return True
def cmdline_main(args):
parser = optparse.OptionParser(
usage=
'\n %prog -l -- list devices'
'\n %prog -- list partitions'
'\n %prog [-p paritition] -ACTION [filename] -- do ACTION (see --help)'
)
parser.add_option('-l', '--list-devices', action='store_true',
help='Print active devices and exit')
parser.add_option('-s', '--select', metavar='BUS:DEVNUM',
help='Select device to operate on')
parser.add_option('-v', '--verbose', action='store_true',
help='Print more messages')
parser.add_option('-p', '--part', action='append',
help='Partition to work on (may be specified many times)')
parser.add_option('-M', '--md5', action='store_true',
help='Calculate MD5 of partition')
parser.add_option('-B', '--backup', action='store_true',
help='Backup partition to a file (- for stdout)')
parser.add_option('-E', '--erase', action='store_true',
help='Erase partition')
parser.add_option('-F', '--flash', action='store_true',
help='Flash file to partition')
parser.add_option('-C', '--compare', action='store_true',
help='Compare partition to file (highly recommended after '
'-F or -B)')
parser.add_option('-R', '--reboot', action='store_true',
help='Reboot device')
opts, args = parser.parse_args(args)
if opts.list_devices:
if args:
parser.error('Unexpected argument')
device_uids, device_list = rktalk.list_devices()
print 'Devices:'
for bus_id, dev_id, vendor_id, prod_id in device_list:
dev_name = '0x%04x:0x%04x' % (vendor_id, prod_id)
print ' Device at %d:%d has type %s' % (bus_id, dev_id, dev_name)
if len(device_list) == 0:
print 'No devices found'
return
file_commands = opts.flash or opts.compare or opts.backup
part_commands = file_commands or opts.md5 or opts.erase
if file_commands and len(args) != 1:
parser.error('Required filename missing')
elif not file_commands and len(args) != 0:
parser.error('Unexpected argument')
if opts.backup and opts.flash:
parser.error('Cannot backup and flash using the same file')
if part_commands and not opts.part:
parser.error('Partition name (-p) is not specified')
if (not opts.backup) and file_commands and (args[0] == '-'):
parser.error('Can only use stdin filename with --backup')
if opts.select is None:
_, device_list = rktalk.list_devices()
if len(device_list) == 0:
parser.error('No devices found')
elif len(device_list) > 1:
parser.error('%d devices found, but -s is not specified' %
len(device_list))
bus_id, dev_id = device_list[0][:2]
else:
bus_id, dev_id = [int(x) for x in opts.select.split(':', 1)]
logger = StderrLogger(verbose=0)
if opts.verbose:
logger.verbose = 2
op = rktalk.RkOperation(logger, bus_id, dev_id)
partitions = op.load_partitions()
# Add pseudo-partitions
max_addr = max(int(size, 16) + int(offset, 16)
for size, offset, name in partitions)
partitions.append(("%08X" % max_addr, "0x%08X" % 0, "__all__"))
min_addr = min(int(size, 16) for size, offset, name in partitions)
if min_addr != 0:
partitions.insert(0, ("%08X" % min_addr, "0x%08X" % 0, "__head__"))
if not (part_commands or opts.reboot):
print 'Partitions:'
last_end = 0
# Alignment is 4MB, apparently?
ALIGNMENT_BLOCKS = 4 * 1024 * 1024 / 512
for size, offset, name in partitions:
atags =[]
if (int(offset, 16) % ALIGNMENT_BLOCKS):
atags.append(' unaligned')
gap = int(offset, 16) - last_end
last_end = int(offset, 16) + int(size, 16)
if gap and name != '__all__':
atags.append(' gap=%.1fkB' % (gap * 512 / 1024.0))
print ' %-20s (%s @ %s, %6.1f MB)%s' % (
name, size, offset, int(size, 16)*512/1024.0/1024.0,
''.join(atags))
return
part_todo = list()
if part_commands:
for p_name in opts.part:
for size, offset, name in partitions:
if name == p_name or (p_name == '*' and name != '__all__'):
p_size = int(size, 16)
p_offset = int(offset, 16)
part_todo.append((p_size, p_offset, name))
if p_name != '*':
break
else:
if p_name != '*':
parser.error('Invalid partition name %r' % p_name)
# We need at least some some progress now.
logger.verbose = max(logger.verbose, 1)
results = list()
for p_size, p_offset, p_name in part_todo:
# Generate output name
tfile = None
if file_commands or opts.md5:
if (not file_commands) or (args[0] == '-'):
# Stdin given. Use a temporary file.
tfile = tempfile.NamedTemporaryFile(mode='rb', prefix='rktalk-',
suffix='.'+p_name)
filename = tfile.name
elif (len(part_todo) == 1):
# Single partition. Use file name as-is.
filename = args[0]
elif args[0] == '' or args[0].endswith('/'):
# Empty or name ends in / -- use partition as filename.
filename = args[0] + p_name
else:
# Else, append .part
filename = args[0].rstrip('.') + '.' + p_name
if opts.flash:
# Verify flash filename right away, before erasing anything
open(filename, 'rb').close()
if opts.md5 or opts.backup:
op.backup_partition(p_offset, p_size, filename,
verify=False)
if opts.md5:
summer = hashlib.md5()
summer.update(open(filename, 'rb').read())
results.append('%s %s' % (summer.hexdigest(), p_name))
if opts.backup and (tfile is not None):
sys.stdout.write(open(filename, 'rb').read())
if opts.erase:
op.erase_partition(p_offset, p_size)
pass
if opts.flash:
op.flash_image_file(p_offset, p_size, filename, verify=False)
pass
if opts.compare:
errors = op.cmp_part_with_file(p_offset, p_size, filename)
if errors:
logger.print_error(
'Verification failed: there were %d errors\n' % errors)
return 1
if opts.reboot:
op.reboot()
for r in results:
print r
return 0