def test_register(self):
"""test HalTransport#register.
check whether none socket can be
register, if the specific exception can't be catch case fail
check
whether the socket can be register, if the socket can't find in poller
map case fail.
:keyword:HalTransport#register
:exception:assertEqual(str(e), "Cannot register to a None poller"),
assertIn(pullSock.socket, poller.poller._map)
:parameter:
:return:
"""
pullSock = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalServerMode,
index=20, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
poller = HalPoller()
try:
pullSock.register(None)
except Exception as e:
self.assertEqual(str(e), "Cannot register to a None poller")
pullSock.register(poller)
self.assertIn(pullSock.socket, poller.poller._map)
pullSock.socket.disable_monitor()
pullSock.monitor.close()
pullSock.close()
def test_poller(self):
"""test create HalPoller.
check whether the socket can be register, if
the socket can't find in poller map case fail
check whether the socket
can be unregister, if the socket can find in poller map case fail.
:keyword:HalPoller
:exception:assertIn(pullSock.socket, poller.poller._map),
assertNotIn(pullSock.socket, poller.poller._map)
:parameter:
:return:
"""
pullSock = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalServerMode,
index=20, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
poller = HalPoller()
poller.register(pullSock.socket)
self.assertIn(pullSock.socket, poller.poller._map)
poller.unregister(pullSock.socket)
self.assertNotIn(pullSock.socket, poller.poller._map)
poller.register(pullSock.socket)
socks = poller.poll(500)
pullSock.socket.disable_monitor()
pullSock.monitor.close()
pullSock.close()
def test_createTransport(self):
transportMgr = HalTransport(
HalTransport.HalTransportClientMgr, HalTransport.HalServerMode,
disconnectHandlerCb=None)
transportMgr.socket.disable_monitor()
transportMgr.monitor.close()
transportMgr.close()
self.assertIsNotNone(transportMgr)
try:
shutil.rmtree(os.path.dirname("/tmp/HalUnitTest/"))
except Exception as e:
pass
transportClient = HalTransport(
HalTransport.HalTransportClientMgr, HalTransport.HalClientMode)
transportClient.socket.disable_monitor()
transportClient.monitor.close()
transportClient.close()
self.assertIsNotNone(transportClient)
transportAgentPush = HalTransport(
HalTransport.HalTransportClientAgentPush, HalTransport.HalServerMode,
index=0, socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=None)
transportAgentPush.socket.disable_monitor()
transportAgentPush.monitor.close()
transportAgentPush.close()
self.assertIsNotNone(transportAgentPush)
transportAgentPull = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalServerMode,
index=0, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
transportAgentPull.socket.disable_monitor()
transportAgentPull.monitor.close()
transportAgentPull.close()
self.assertIsNotNone(transportAgentPull)
transportAgentPull = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalClientMode,
index=0, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
transportAgentPull.socket.disable_monitor()
transportAgentPull.monitor.close()
transportAgentPull.close()
self.assertIsNotNone(transportAgentPull)
# error case
try:
transport = HalTransport(1000, HalTransport.HalClientMode,
index=0, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
except Exception as e:
self.assertEqual(str(e), "Unsupported HalTransportType")
def test_send(self):
"""test HalTransport#send.
check whether none message can be send, if
can't catch the specific exception case fail
check whether hello
message can be send, if the returned value is false case fail.
:keyword:HalTransport#send
:exception:assertRegexpMatches(str(e), "Cannot send the msg since the msg is None, agent.*"),
assertEqual(pushSock.send("hello"), True)
:parameter:
:return:
"""
transport = HalTransport(
HalTransport.HalTransportClientMgr, HalTransport.HalServerMode,
disconnectHandlerCb=self._disconnectCb)
try:
transport.send(None)
except Exception as e:
self.assertRegexpMatches(
str(e), "Cannot send the msg since the msg is None, agent.*")
transport.socket.disable_monitor()
transport.monitor.close()
transport.close()
pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalClientMode,
index=19, socketMode=HalTransport.HalSocketPushMode, disconnectHandlerCb=None)
self.assertEqual(pushSock.send("hello"), True)
pushSock.socket.disable_monitor()
pushSock.monitor.close()
pushSock.close()
def test_recv(self):
"""test HalTransport#recv.
check if it can handle the method event, with
the exception/logicality's correct
check whether hello message can be
receive after send out, if the returned value match case fail.
:keyword:HalTransport#recv
:exception:assertEqual(pullSock.recv(), "hello")
:parameter:
:return:
"""
pullSock = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalServerMode,
index=20, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
pullSock.socket.disable_monitor()
pullSock.monitor.close()
pullSock.close()
pullSock = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalServerMode,
index=20, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=None)
pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalClientMode,
index=20, socketMode=HalTransport.HalSocketPushMode, disconnectHandlerCb=None)
pushSock.send("hello")
print("Try to receive the message")
self.assertEqual("hello", pullSock.recv())
pullSock.socket.disable_monitor()
pullSock.monitor.close()
pullSock.close()
pushSock.socket.disable_monitor()
pushSock.monitor.close()
pushSock.close()
class OpenRpdDriver(HalDriverClient):
"""The OpenRPD base driver
"""
## __metaclass__ = AddLoggerToClass
def __init__(self,
drvName,
drvDesc,
drvVer,
supportedMsgType,
supportedNotificationMsgs,
interestedNotification=None):
"""
:param drvName: The driver name, such as Generic Driver
:param drvDesc: driver for full Cable Labs RPHY support
:param drvVer: driver version
:param supportedMsgType: will support all RPHY OpenRPD message types
:param supportedNotificationMsgs: the supported notification msg types
:return: OpenRPD Driver object
NOTES: The 'supportedNotificationMsgs' parameter passed to HalDriverClient
and then forwarded to HalManager.py, but it seems HalManager.py does NOT
do anything with this parameter. Consider remove it from ClientProvision.proto?
As of now, we don't need to have this parameter. It just adds confusion!
"""
if supportedMsgType is None:
supportedMsgType = OpenRpdMsgHandler.default_supported_msg_types
super(OpenRpdDriver,
self).__init__(drvName, drvDesc, drvVer, supportedMsgType,
supportedNotificationMsgs, interestedNotification)
# update the supported messages
self.HalMsgsHandler = {
"HalClientRegisterRsp": self.recv_register_msg_cb,
"HalClientHelloRsp": self.recvHelloRspMsgCb,
"HalConfig": self.recv_cfg_msg_cb,
"HalConfigRsp": self.recv_cfg_msg_rsp_cb,
"HalNotification": self.recvNotificationCb,
}
# Handlers for different configuration messages
self.hal_config_msg_handlers = {
HalConfigMsg.MsgTypeRpdCapabilities:
OpenRpdMsgHandler.capabilities_get,
HalConfigMsg.MsgTypeDsRfPort:
OpenRpdMsgHandler.config_ds_port,
HalConfigMsg.MsgTypeDsScQamChannelConfig:
OpenRpdMsgHandler.config_dsqam_channel,
HalConfigMsg.MsgTypeDsOfdmChannelConfig:
OpenRpdMsgHandler.config_dsofdm_channel,
HalConfigMsg.MsgTypeDsOfdmProfile:
OpenRpdMsgHandler.config_dsofdm_profile,
HalConfigMsg.MsgTypeDsRfPortPerf:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeDsScQamChannelPerf:
OpenRpdMsgHandler.req_dsqam_channel_status,
HalConfigMsg.MsgTypeDsOfdmChannelPerf:
OpenRpdMsgHandler.req_dsofdm_channel_status,
HalConfigMsg.MsgTypeDsOob551IPerf:
OpenRpdMsgHandler.req_oob551_mod_status,
HalConfigMsg.MsgTypeDsOob552Perf:
OpenRpdMsgHandler.req_oob552_mod_status,
HalConfigMsg.MsgTypeNdfPerf:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeUsRfPortPerf:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeUsScQamChannelConfig:
OpenRpdMsgHandler.config_usatdma_channel,
HalConfigMsg.MsgTypeUsOfdmaChannelConfig:
OpenRpdMsgHandler.config_usofdma_channel,
HalConfigMsg.MsgTypeUsOfdmaInitialRangingIuc:
OpenRpdMsgHandler.config_dummy,
HalConfigMsg.MsgTypeUsOfdmaFineRangingIuc:
OpenRpdMsgHandler.config_dummy,
HalConfigMsg.MsgTypeUsOfdmaDataRangingIuc:
OpenRpdMsgHandler.config_dummy,
HalConfigMsg.MsgTypeUsOfdmaDataIuc:
OpenRpdMsgHandler.config_dummy,
HalConfigMsg.MsgTypeUsOfdmaSubcarrierCfgState:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeUsScQamChannelPerf:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeUsOfdmaChannelPerf:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeUsOob551IPerf:
OpenRpdMsgHandler.req_oob551_demod_status,
HalConfigMsg.MsgTypeUsOob552Perf:
OpenRpdMsgHandler.req_oob552_demod_status,
HalConfigMsg.MsgTypeNdrPerf:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeSidQos:
OpenRpdMsgHandler.config_sid_qos,
# L2TPv3 messages
HalConfigMsg.MsgTypeL2tpv3CapabilityQuery:
OpenRpdMsgHandler.capabilities_get,
HalConfigMsg.MsgTypeL2tpv3SessionReqNone:
OpenRpdMsgHandler.req_depi_pw,
HalConfigMsg.MsgTypeL2tpv3SessionReqDsOfdm:
OpenRpdMsgHandler.req_depi_pw,
HalConfigMsg.MsgTypeL2tpv3SessionReqDsOfdmPlc:
OpenRpdMsgHandler.req_depi_pw,
HalConfigMsg.MsgTypeL2tpv3SessionReqDsScqam:
OpenRpdMsgHandler.req_depi_pw,
HalConfigMsg.MsgTypeL2tpv3SessionReqUsAtdma:
OpenRpdMsgHandler.req_uepi_pw,
HalConfigMsg.MsgTypeL2tpv3SessionReqUsOfdma:
OpenRpdMsgHandler.req_uepi_pw,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte551Fwd:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte551Ret:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte552Fwd:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte552Ret:
OpenRpdMsgHandler.req_dummy,
HalConfigMsg.MsgTypeL2tpv3SessionReqNdf:
OpenRpdMsgHandler.req_ndf,
HalConfigMsg.MsgTypeL2tpv3SessionReqNdr:
OpenRpdMsgHandler.req_ndr,
# Ptp
# HalConfigMsg.MsgTypeRdtiConfig: config_docsis_timer
HalConfigMsg.MsgTypeL2tpv3CinIfAssignment:
OpenRpdMsgHandler.cin_if_assign,
HalConfigMsg.MsgTypeL2tpv3LcceIdAssignment:
OpenRpdMsgHandler.lcce_id_assign,
# VspAvpQuery
HalConfigMsg.MsgTypeVspAvpExchange:
OpenRpdMsgHandler.vsp_avp_handler,
# RcpVendorSpecificTlv
HalConfigMsg.MsgTypeRcpVendorSpecific:
OpenRpdMsgHandler.vsp_tlv_handler,
}
self.disconnected = True
self.dispatcher = Dispatcher()
# setup the logging
self.logger = OpenRpdMsgHandler.get_msg_handler_logger()
self.logger.info("OpenRPD Driver Initialized")
self.seqNum = 0
# start modeled from HalPtpDriver.py
def start(self, simulate_mode=False):
"""start poll the transport socket
:return:
"""
self.logger.info("Setup the Hal Transport connection...")
self.connectionSetup()
self.logger.info("Connection setup done...")
self.logger.info("Register the driver with the Hal manager...")
self.register(self.drvID)
self.logger.info("End of register...")
self.dispatcher.loop()
def recv_register_msg_cb(self, cfg):
"""the callback handler for the configuration message
Modified from base class by registering the sockets
with dispatcher.
:param cfg: the configuration message received from the Hal
:return:
"""
# self.logger.debug("Recv a Message from the Hal:" % str(cfg.msg))
if cfg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Cannot register to Hal, reason[%s]" %
cfg.msg.Rsp.ErrorDescription)
return
self.drvID = cfg.msg.ClientID
# Setup the push and pull connection
self.pullPath = cfg.msg.PathFromHalToClient
self.pushPath = cfg.msg.PathFromClientToHal
# get the index of the path
index = self._getIndexFromPath()
if index == -1:
self.logger.error("Cannot get index from the path [%s]" %
self.pushPath)
return
if self.index == -1:
self.index = index
self.pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.pullSock = HalTransport(
HalTransport.HalTransportClientAgentPush,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.connectionDisconnectCb)
# register driver's sockets with the dispatcher
self.dispatcher.fd_register(self.pullSock.socket, zmq.POLLIN,
self.openrpd_drv_hal_cb)
self.dispatcher.fd_register(self.pushSock.monitor, zmq.POLLIN,
self.openrpd_drv_hal_cb)
self.dispatcher.fd_register(self.pullSock.monitor, zmq.POLLIN,
self.openrpd_drv_hal_cb)
# send Hello To Hal
self.sayHelloToHal()
if (None is not self.interestedNotification):
self.sendInterestedNotifications(self.interestedNotification)
self.disconnected = False
return
def connectionSetup(self):
"""Create the connection to the mgr
:return:
"""
self.logger.info("Create the connection to the mgr....")
# Create a connection to Hal driver mgr
self.mgrConnection = HalTransport(
HalTransport.HalTransportClientMgr,
HalTransport.HalClientMode,
disconnectHandlerCb=self.disconnectCb)
self.mgrConnection.connects()
self.HalMsgsHandler[
self.mgrConnection.socket] = self.recv_register_msg_cb
# register the mgr socket with the dispatcher
self.dispatcher.fd_register(self.mgrConnection.socket, zmq.POLLIN,
self.openrpd_drv_hal_cb)
self.dispatcher.fd_register(self.mgrConnection.monitor, zmq.POLLIN,
self.openrpd_drv_hal_cb)
def connection_cleanup(self):
"""Close the connection to the mgr
:return:
"""
if self.disconnected:
self.logger.debug("A previous event has been processed, skip it!")
return
if self.mgrConnection is not None:
self.dispatcher.fd_unregister(self.mgrConnection.socket)
self.dispatcher.fd_unregister(self.mgrConnection.monitor)
self.mgrConnection.socket.disable_monitor()
self.mgrConnection.monitor.close()
self.mgrConnection.socket.close()
if self.pullSock is not None:
self.dispatcher.fd_unregister(self.pullSock.socket)
self.dispatcher.fd_unregister(self.pullSock.monitor)
self.pullSock.socket.disable_monitor()
self.pullSock.monitor.close()
self.pullSock.socket.close()
if self.pushSock is not None:
self.dispatcher.fd_unregister(self.pushSock.monitor)
self.pushSock.socket.disable_monitor()
self.pushSock.monitor.close()
self.pushSock.socket.close()
self.disconnected = True
def disconnectCb(self, msg):
"""A disconnect condition has been detected,
clean up the connection and then reconnect
and re-register with the Hal.
:param msg:
:return:
"""
self.logger.error("Detected disconnected condition")
if self.disconnected:
self.logger.info("A previous event has been processed, skip it!")
return
self.logger.info("Detected disconnected, registering again")
# clean up the push and pull socket
self.dispatcher.fd_unregister(self.mgrConnection.socket)
self.dispatcher.fd_unregister(self.mgrConnection.monitor)
self.mgrConnection.monitor.close()
self.mgrConnection.close()
# re-register the message
self.connectionSetup()
# The zmq lower part will handle the reconnect
self.register(self.drvID)
self.disconnected = True
def openrpd_drv_hal_cb(self, sock, mask):
self.logger.debug("Driver received hal cb event")
if self.pushSock is not None and sock == self.pushSock.monitor:
self.pushSock.monitorHandler(recv_monitor_message(sock))
return
if self.pullSock is not None and sock == self.pullSock.monitor:
self.pullSock.monitorHandler(recv_monitor_message(sock))
return
if sock == self.mgrConnection.monitor:
self.mgrConnection.monitorHandler(recv_monitor_message(sock))
return
while sock.getsockopt(zmq.EVENTS) and zmq.POLLIN:
try:
bin = sock.recv(flags=zmq.NOBLOCK)
msg = HalMessage.DeSerialize(bin)
self.logger.debug("Got a zmq msg:%s type:%s" %
(msg.msg, msg.type))
if msg.type in self.HalMsgsHandler:
handler = self.HalMsgsHandler[msg.type]
handler(msg)
except zmq.ZMQError as e:
self.logger.debug(
"Got an error when trying with nonblock read:" + str(e))
break
except Exception as e:
self.logger.error("Got an un-expected error:%s", str(e))
break
def recvNotificationCb(self, ntf):
"""Receive a notification message from the HAL.
:param ntf:
:return:
"""
try:
handler = self.hal_config_msg_handlers[ntf.msg.HalNotificationType]
self.logger.info("Receive a interest notification message:" +
str(ntf.msg))
if not isinstance(ntf, HalMessage):
raise AttributeError("Invalid HAL message passed")
ntf = handler(ntf)
if None is not ntf:
self.send_cfg_msg(HalConfigMsg.MsgTypeVspAvpExchange,
ntf.msg.HalNotificationPayLoad)
else:
self.logger.info("Notification message return is None")
except Exception as e:
self.logger.error("Got an error:%s, the ntf msg:%s", str(e),
ntf.msg)
def send_cfg_msg(self, cfgMsgType, payload):
msg = HalMessage("HalConfig",
SrcClientID=self.drvID,
CfgMsgType=cfgMsgType,
SeqNum=self.seqNum,
CfgMsgPayload=payload)
self.logger.debug("sending config - type: %d, msg: %s" %
(cfgMsgType, msg))
self.pushSock.send(msg.Serialize())
self.seqNum += 1
return
def send_cfg_rsp_msg(self, cfg):
"""The configuration response routine
:param cfg: The original configuration message
:return:
"""
result = HalCommon_pb2.SUCCESS
cfgMsg = cfg.msg
l2tpcfgmsgType = (HalConfigMsg.MsgTypeL2tpv3SessionReqDsOfdm,
HalConfigMsg.MsgTypeL2tpv3SessionReqDsOfdmPlc,
HalConfigMsg.MsgTypeL2tpv3SessionReqDsScqam,
HalConfigMsg.MsgTypeL2tpv3SessionReqUsAtdma,
HalConfigMsg.MsgTypeL2tpv3SessionReqUsOfdma,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte551Fwd,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte551Ret,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte552Fwd,
HalConfigMsg.MsgTypeL2tpv3SessionReqScte552Ret,
HalConfigMsg.MsgTypeL2tpv3SessionReqNdf,
HalConfigMsg.MsgTypeL2tpv3SessionReqNdr,
HalConfigMsg.MsgTypeL2tpv3CinIfAssignment,
HalConfigMsg.MsgTypeL2tpv3LcceIdAssignment)
if cfgMsg.CfgMsgType in l2tpcfgmsgType:
rsp = L2tpv3Hal_pb2.t_l2tpSessionRsp()
req = L2tpv3Hal_pb2.t_l2tpSessionReq()
req.ParseFromString(cfgMsg.CfgMsgPayload)
# fill session_selector
rsp.session_selector.local_session_id = req.session_selector.local_session_id
rsp.session_selector.remote_session_id = req.session_selector.remote_session_id
rsp.session_selector.local_ip = req.session_selector.local_ip
rsp.session_selector.remote_ip = req.session_selector.remote_ip
rsp.result = True
elif (cfgMsg.CfgMsgType == HalConfigMsg.MsgTypeVspAvpExchange):
rsp = L2tpv3VspAvp_pb2.t_l2tpVspAvpMsg()
rsp.ParseFromString(cfgMsg.CfgMsgPayload)
self.logger.debug(
"vsp_avp_handler re-parse srcClientID: %s, Seq num: %d, "
"op: %d, vid %d, attr %d, strVal %s" %
(cfg.msg.SrcClientID, cfg.msg.SeqNum, rsp.oper, rsp.vendorId,
rsp.attrType, rsp.attrValBuf))
if rsp.rspCode == L2tpv3VspAvp_pb2.t_l2tpVspAvpMsg(
).VSP_AVP_STATUS_FAILURE:
# send HalConfigRsp with failure status if OpenRPD driver can't handle this.
result = HalCommon_pb2.FAILED
elif (cfgMsg.CfgMsgType == HalConfigMsg.MsgTypeRcpVendorSpecific):
rsp = t_RcpMessage()
rsp.ParseFromString(cfgMsg.CfgMsgPayload)
self.logger.debug("send_cfg_rsp_msg payload: %s, result: %d" %
(rsp.RpdDataMessage.RpdData, rsp.RcpDataResult))
else:
rsp = t_RcpMessage()
rsp.ParseFromString(cfgMsg.CfgMsgPayload)
self.logger.debug("send_cfg_rsp_msg payload: %s" %
rsp.RpdDataMessage.RpdData)
rsp.RcpDataResult = t_RcpMessage.RCP_RESULT_OK
payload = rsp.SerializeToString()
self.logger.debug("cfg response srcClientID: %s, Seq num: %d" %
(cfgMsg.SrcClientID, cfgMsg.SeqNum))
msg = HalMessage("HalConfigRsp",
SrcClientID=cfgMsg.SrcClientID,
SeqNum=cfgMsg.SeqNum,
Rsp={
"Status": HalCommon_pb2.SUCCESS,
"ErrorDescription": ""
},
CfgMsgType=cfgMsg.CfgMsgType,
CfgMsgPayload=payload)
self.logger.debug("sending cfg response - type: %d, msg: %s" %
(cfgMsg.CfgMsgType, msg))
self.pushSock.send(msg.Serialize())
def recv_cfg_msg_rsp_cb(self, cfg):
cfgMsg = cfg.msg
self.logger.debug("receive cfg response - type: %d" %
(cfgMsg.CfgMsgType))
pass
def recv_cfg_msg_cb(self, cfg):
"""Receive a configuration message from the Hal, processing it
:param cfg:
:return:
"""
try:
handler = self.hal_config_msg_handlers[cfg.msg.CfgMsgType]
self.logger.info("Received a cfg message type: %d",
cfg.msg.CfgMsgType)
if not isinstance(cfg, HalMessage):
raise AttributeError("Invalid HAL message passed")
cfg = handler(cfg)
self.send_cfg_rsp_msg(cfg)
except Exception as e:
self.logger.error("Got an error:%s, the cfg msg:%s", str(e),
cfg.msg)
def cleanup_sockets(self):
for fd in self.fd_to_socket:
sock = self.fd_to_socket[fd]
self.poller.unregister(sock)
sock.close()
self.fd_to_socket.clear()
class ProvMgrHalDriver(HalDriverClient):
__metaclass__ = AddLoggerToClass
ntfmsg_list = [
MsgTypeRpdCapabilities,
]
cfgmsg_list = [
MsgTypeCcapCoreIdentification,
MsgTypeRedundantCoreIpAddress,
MsgTypeRpdCtrl,
]
def __init__(self,
drvName,
drvDesc,
drvVer,
supportedMsgType,
supportedNotificationMsgs,
interestedNotification,
dispatcher,
logConfigurePath=None,
mgr=None):
"""
:param drvName:
:param drvDesc:
:param drvVer:
:param supportedMsgType:
:param supportedNotificationMsgs:
:param dispatcher:
:param logConfigurePath:
:param mgr:
"""
super(ProvMgrHalDriver,
self).__init__(drvName, drvDesc, drvVer, supportedMsgType,
supportedNotificationMsgs, interestedNotification)
self.mgr = mgr
self.rpd_cap = None
self.dispatcher = dispatcher
self.HalConfigMsgHandlers = {
MsgTypeCcapCoreIdentification: self.recvCcapCoreIdentification,
MsgTypeRedundantCoreIpAddress: self.recvRedundantCoreIpAddress,
MsgTypeRpdCtrl: self.recvRpdResetCtrl,
}
self.HalNtfHandlers = {
MsgTypeRpdCapabilities: self.recvRpdCapabilities,
}
self.HalConfigMsgRspHandlers = {
MsgTypeRpdCapabilities: self.recMsgTypeRpdCapabilitiesRspCb,
}
RESET_CTRL_FILENAME = '/rpd/config/reset_ctrl'
def recvRegisterMsgCb(self, cfg):
# self.logger.debug("Recv a Message from the Hal:" % str(cfg.msg))
if cfg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Cannot register to Hal, reason[%s]" %
cfg.msg.Rsp.ErrorDescription)
return
self.drvID = cfg.msg.ClientID
# Setup the push and pull connection
self.pullPath = cfg.msg.PathFromHalToClient
self.pushPath = cfg.msg.PathFromClientToHal
# get the index of the path
index = self._getIndexFromPath()
if index == -1:
self.logger.error("Cannot get index from the path [%s]" %
self.pushPath)
return
if self.index == -1:
self.index = index
self.pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.pullSock = HalTransport(
HalTransport.HalTransportClientAgentPush,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.connectionDisconnectCb)
# register to the poller
self.dispatcher.fd_register(self.pullSock.socket, zmq.POLLIN,
self.provmgr_cb)
self.dispatcher.fd_register(self.pushSock.monitor, zmq.POLLIN,
self.provmgr_cb)
self.dispatcher.fd_register(self.pullSock.monitor, zmq.POLLIN,
self.provmgr_cb)
# send Hello To Hal
self.sayHelloToHal()
if self.interestedNotification is not None:
self.sendInterestedNotifications(self.interestedNotification)
self.disconnected = False
return
def sendCfgRspMsg(self, cfg, rsp=None):
"""The configuration response routine, the driver implementor should
fill sth into this function.
:param cfg: The original configuration message
:param rsp: respond
:return:
"""
cfgMsg = cfg.msg
msg = HalMessage("HalConfigRsp",
SrcClientID=cfgMsg.SrcClientID,
SeqNum=cfgMsg.SeqNum,
Rsp=rsp,
CfgMsgType=cfgMsg.CfgMsgType,
CfgMsgPayload=cfgMsg.CfgMsgPayload)
self.send(msg.Serialize())
def recvCfgMsgCb(self, cfgMsg):
"""Receive a configuration message from the Hal, processing it.
:param cfgMsg:
:return:
"""
try:
msgType = cfgMsg.msg.CfgMsgType
if msgType not in self.HalConfigMsgHandlers \
or self.HalConfigMsgHandlers[msgType] is None:
rsp = {
"Status": HalCommon_pb2.NOTSUPPORTED,
"ErrorDescription": "msgType %d is not supported" % msgType
}
else:
rsp = self.HalConfigMsgHandlers[msgType](cfgMsg.msg)
except Exception as e: # pragma: no cover
self.logger.error("Got an error:%s, the cfg msg:%s", str(e),
cfgMsg.msg)
rsp = {
"Status":
HalCommon_pb2.FAILED,
"ErrorDescription":
"Process configuration failed, reason:%s" % str(e)
}
self.sendCfgRspMsg(cfgMsg, rsp)
def recvCfgMsgRspCb(self, cfg):
"""Receive a configuration response message from the Hal, processing it.
:param cfg:
:return:
"""
self.logger.debug("Recv a configuration response message:" +
str(cfg.msg.CfgMsgType))
if cfg.msg.CfgMsgType in self.HalConfigMsgRspHandlers:
cb = self.HalConfigMsgRspHandlers[cfg.msg.CfgMsgType]
cb(cfg)
def sendNotificationMsg(self, notificationType, notificationPayload):
"""Send a notification to Hal.
:param notificationType: The notification type, the client must
declare the notification type to Hal first
:param notificationPayload: the string payload, Hal will not touch
this part
:return:
"""
self.logger.debug("send a a notification message to Hal")
if self.disconnected:
self.logger.warning(
"The client is on disconnected state,"
" skip to send the message, notification type:%s",
notificationType)
return
if notificationType is None or not isinstance(notificationPayload,
str):
self.logger.warning("Cannot send a None or incorrect type to HAL, "
"str is required for msg.")
return
notification = HalMessage("HalNotification",
ClientID=self.drvID,
HalNotificationType=notificationType,
HalNotificationPayLoad=notificationPayload)
self.send(notification.Serialize())
def recvNotificationCb(self, ntf):
"""Receive a notification message from the HAL.
:param ntf:
:return:
"""
self.logger.info("Receive a interest notification message:" +
str(ntf.msg))
self.recvNtf += 1
try:
msgType = ntf.msg.HalNotificationType
if msgType in self.HalNtfHandlers:
self.HalNtfHandlers[msgType](ntf.msg.HalNotificationPayLoad)
else:
self.logger.debug(
"Receive a interest notification message: no handler for %s",
str(msgType))
except Exception as e:
self.logger.error("Got an error:%s, the ntf msg:%s", str(e),
str(msgType))
def recvHelloRspMsgCb(self, hello):
"""Call back for Hello Message.
:param hello:
:return:
"""
self.logger.debug("Recv a hello message")
self.sendRpdCapReq()
def connectionSetup(self, dispatcher):
"""Create the connection to the mgr and setup the poller.
:return:
"""
self.logger.debug("Create the connection to the mgr....")
# Create a connection to Hal driver mgr
self.mgrConnection = HalTransport(
HalTransport.HalTransportClientMgr,
HalTransport.HalClientMode,
disconnectHandlerCb=self.connectionDisconnectCb)
# create the poller
if self.poller is None:
self.poller = dispatcher.get_poll()
# register the mgr socket
dispatcher.fd_register(self.mgrConnection.socket, zmq.POLLIN,
self.provmgr_cb)
dispatcher.fd_register(self.mgrConnection.monitor, zmq.POLLIN,
self.provmgr_cb)
def connectionDisconnectCb(self, msg):
"""The connection has been detected disconnected , register it again.
:param msg:
:return:
"""
if self.disconnected:
self.logger.debug("A previous event has been processed, skip it!")
return
self.logger.debug("Detected disconnected, register again")
self.poller.unregister(self.mgrConnection.socket)
self.poller.unregister(self.mgrConnection.monitor)
self.mgrConnection.socket.disable_monitor()
self.mgrConnection.monitor.close()
self.mgrConnection.close()
# re-register the message
self.connectionSetup(self.dispatcher)
self.register(self.drvID)
# The zmq lower part will handle the reconnect
self.disconnected = True
def start(self):
"""start poll the transport socket.
:return:
"""
self.logger.debug("Start the driver poll...")
try:
self.connectionSetup(self.dispatcher)
self.register(self.drvID)
except Exception as e:
self.logger.warn("ProvMgr hal client start fail exception %s",
str(e))
def provmgr_cb(self, sock, mask):
if self.pushSock is not None and sock == self.pushSock.monitor:
self.pushSock.monitorHandler(recv_monitor_message(sock))
return
if self.pullSock is not None and sock == self.pullSock.monitor:
self.pullSock.monitorHandler(recv_monitor_message(sock))
return
if self.mgrConnection is not None and sock == self.mgrConnection.monitor:
self.mgrConnection.monitorHandler(recv_monitor_message(sock))
return
while sock.getsockopt(zmq.EVENTS) and zmq.POLLIN:
try:
bin = sock.recv(flags=zmq.NOBLOCK)
msg = HalMessage.DeSerialize(bin)
if msg.type in self.HalMsgsHandler:
handler = self.HalMsgsHandler[msg.type]
handler(msg)
except zmq.ZMQError as e:
self.logger.debug(
"Got an error when trying with non-block read:" + str(e))
break
except Exception as e:
self.logger.warn(
"Exception happens when provmgr hal recv socket, reason:%s"
% str(e))
break
def DeSerializeConfigMsgPayload(self, cfgMsg):
if cfgMsg.CfgMsgPayload is None:
return None
cfgMsgPayload = t_RcpMessage()
cfgMsgPayload.ParseFromString(cfgMsg.CfgMsgPayload)
return cfgMsgPayload
def recvCcapCoreIdentification(self, cfgMsg):
rcp_msg = self.DeSerializeConfigMsgPayload(cfgMsg)
if rcp_msg is None:
return {
"Status": HalCommon_pb2.FAILED,
"ErrorDescription": "DeSerialize ConfigMsgPayload fail"
}
self.logger.debug(
"ProvMgr driver receive Config CcapCoreIdentification %s" %
str(rcp_msg))
if rcp_msg.RpdDataMessage.RpdDataOperation == t_RpdDataMessage.RPD_CFG_READ:
rcp_msg.RcpDataResult = t_RcpMessage.RCP_RESULT_OK
del rcp_msg.RpdDataMessage.RpdData.CcapCoreIdentification[0]
for key in CcapCoreIdentification.get_keys():
ccapCoreIdent = rcp_msg.RpdDataMessage.RpdData.CcapCoreIdentification.add(
)
ccapCore = CcapCoreIdentification(key)
ccapCore.read()
ccapCoreIdent.Index = key
ccapCoreIdent.CoreId = ccapCore.core_id
ccapCoreIdent.CoreIpAddress = ccapCore.core_ip_addr
ccapCoreIdent.IsPrincipal = ccapCore.is_principal
ccapCoreIdent.CoreName = ccapCore.core_name
ccapCoreIdent.VendorId = ccapCore.vendor_id
ccapCoreIdent.InitialConfigurationComplete = ccapCore.initial_configuration_complete
ccapCoreIdent.MoveToOperational = ccapCore.move_to_operational
ccapCoreIdent.CoreFunction = ccapCore.core_function
ccapCoreIdent.ResourceSetIndex = ccapCore.resource_set_index
ccapCoreIdent.CoreMode = ccapCore.core_mode
self.logger.debug("ProvMgr driver rsp ccapCoreIdent tlv %s" %
ccapCoreIdent)
cfgMsg.CfgMsgPayload = rcp_msg.SerializeToString()
rsp = {
"Status": HalCommon_pb2.SUCCESS,
"ErrorDescription": "Serialize ConfigMsgPayload success"
}
return rsp
if rcp_msg.RpdDataMessage.RpdDataOperation == t_RpdDataMessage.RPD_CFG_WRITE or \
rcp_msg.RpdDataMessage.RpdDataOperation == t_RpdDataMessage.RPD_CFG_ALLOCATE_WRITE:
rsp = {
"Status":
HalCommon_pb2.SUCCESS_IGNORE_RESULT,
"ErrorDescription":
"manager hal ignore write and allocate write for ccapCoreIdentification"
}
return rsp
def recvRedundantCoreIpAddress(self, cfgMsg):
rcp_msg = self.DeSerializeConfigMsgPayload(cfgMsg)
self.logger.info("ProvMgr driver receive RedundantCoreIpAddress %s" %
str(rcp_msg))
rsp = {"Status": HalCommon_pb2.SUCCESS, "ErrorDescription": "success"}
return rsp
def recvRpdResetCtrl(self, cfgMsg):
rcp_msg = self.DeSerializeConfigMsgPayload(cfgMsg)
if rcp_msg is None:
return {
"Status": HalCommon_pb2.FAILED,
"ErrorDescription": "DeSerialize ConfigMsgPayload fail"
}
self.logger.debug("\nProvMgr receive RpdResetCtrl:" + str(rcp_msg))
operation = rcp_msg.RpdDataMessage.RpdDataOperation
recv_rcp_msg = rcp_msg.RpdDataMessage.RpdData
if recv_rcp_msg.HasField("RpdCtrl") and recv_rcp_msg.RpdCtrl.HasField(
"ResetCtrl"):
if operation not in [
t_RpdDataMessage.RPD_CFG_WRITE,
t_RpdDataMessage.RPD_CFG_READ
]:
return {
"Status":
HalCommon_pb2.FAILED,
"ErrorDescription":
"Operation %d for RpdResetCtrl is not supported" %
operation
}
rcp_rpd_resetctrl = recv_rcp_msg.RpdCtrl.ResetCtrl
if operation == t_RpdDataMessage.RPD_CFG_WRITE:
reset = rcp_rpd_resetctrl.Reset
reset_type = rcp_tlv_def.RESET_TYPE[reset]
with open(self.RESET_CTRL_FILENAME, 'w') as f:
f.write(str(reset) + ":" + str(reset_type) + "\n")
for ccap_core in CCAPCore.ccap_core_db.values():
ccap_core.del_ccap_core()
SysTools.reboot(reset_type)
if operation == t_RpdDataMessage.RPD_CFG_READ:
try:
with open(self.RESET_CTRL_FILENAME, 'r') as fr:
reset_rd = fr.read()
rcp_rpd_resetctrl.Reset = int(reset_rd.strip(":")[0])
except IOError:
# file don't exist,skip check
pass
cfgMsg.CfgMsgPayload = rcp_msg.SerializeToString()
return {
"Status":
HalCommon_pb2.SUCCESS,
"ErrorDescription":
"ProMgr handle RpdResetCtrl success for %d" % operation
}
else:
return {
"Status": HalCommon_pb2.SUCCESS_IGNORE_RESULT,
"ErrorDescription": "ProvMgr Do not Have RpdCtrl Filed."
}
def valid_rpd_cap(self, rcp_rpd_cap):
# check the instance
if not isinstance(rcp_rpd_cap, t_RpdCapabilities):
return False
# check it is not the default value
default_cap = t_RpdCapabilities()
GCPObject.default_gpb(default_cap)
if rcp_rpd_cap == default_cap:
return False
return True
def recMsgTypeRpdCapabilitiesRspCb(self, halrspmsg):
try:
# Check the status
if halrspmsg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
# yes, we recv a error message from HAL
self.logger.warning("Receive a hal fail message:%s" %
halrspmsg.msg)
return False
cfg_rsp = t_RcpMessage()
cfg_rsp.ParseFromString(halrspmsg.msg.CfgMsgPayload)
if cfg_rsp.RcpDataResult != t_RcpMessage.RCP_RESULT_OK:
# yes we recv a error msg from driver
self.logger.warning("Recv a driver fail message:%s" %
str(cfg_rsp))
return False
rcp_rpd_cap = cfg_rsp.RpdDataMessage.RpdData.RpdCapabilities
if not self.valid_rpd_cap(rcp_rpd_cap):
self.logger.debug(
"Receive invalid RpdCapabilities rsp from driver")
return False
if not self.rpd_cap:
self.rpd_cap = t_RpdCapabilities()
self.rpd_cap.CopyFrom(rcp_rpd_cap)
self.logger.debug("Receive RpdCapabilities rsp from driver")
return True
except Exception as e:
self.logger.warning("cap fail %s", str(e))
return False
def recvRpdCapabilities(self, ntfMsg):
rpd_cap = t_RpdCapabilities()
rpd_cap.ParseFromString(ntfMsg)
if not self.valid_rpd_cap(rpd_cap):
self.logger.warning(
"ProvMgr receive invalid rpdCapabilities notification from driver"
)
return
self.rpd_cap = rpd_cap
self.logger.debug("Receive rpdCapabilities notification: %s",
str(self.rpd_cap))
return
def sendRpdCapReq(self):
try:
if self.rpd_cap:
self.logger.debug(
"Already has Rpd cap in store, no need to send req")
return True
rcp_msg = t_RcpMessage()
rcp_msg.RcpDataResult = t_RcpMessage.RCP_RESULT_OK
rcp_msg.RcpMessageType = t_RcpMessage.RPD_CONFIGURATION
rpd_data_msg = t_RpdDataMessage()
rpd_data_msg.RpdDataOperation = t_RpdDataMessage.RPD_CFG_READ
rcp_cfg = config()
sub_tlv = rcp_cfg.RpdCapabilities
GCPObject.default_gpb(gpb=sub_tlv)
rpd_data_msg.RpdData.CopyFrom(rcp_cfg)
rcp_msg.RpdDataMessage.CopyFrom(rpd_data_msg)
cfgMsgContent = rcp_msg.SerializeToString()
msg = HalMessage("HalConfig",
SrcClientID=self.drvID,
SeqNum=self.seqNum,
CfgMsgType=MsgTypeRpdCapabilities,
CfgMsgPayload=cfgMsgContent)
self.send(msg.Serialize())
self.seqNum += 1
self.logger.debug("send RPD capabilities req to hal driver")
return True
except Exception as e:
self.logger.warning("send RPD cap req failed :%s", str(e))
return False
def sendOperationalStatusNtf(self, operational):
"""
:param operational: True or False to represent the current operational status
:return:
"""
led_msg = t_LED()
led_msg.setLed.ledType = led_msg.LED_TYPE_STATUS
led_msg.setLed.color = led_msg.LED_COLOR_GREEN
if operational:
led_msg.setLed.action = led_msg.LED_ACTION_LIT
else:
led_msg.setLed.action = led_msg.LED_ACTION_DARK
self.logger.debug("Set led notification message: %s", led_msg)
self.sendNotificationMsg(MsgTypeSetLed, led_msg.SerializeToString())
class CliHalIpc(object):
"""
The Client for Hal
"""
__metaclass__ = AddLoggerToClass
def __init__(self, appName, appDesc, appVer, interestedNotification, logConfigurePath=None):
"""
:param appName: The application name, such as RPD CLI
:param appDesc: A brief description about this application, such as the functionality description
:param appVer: Driver specific version, such as 1.0.1
:param interestedNotification: a tuple or list for the application interested msg types, the form will be
(1, 2, 456, 10)
:return: HalClient object
"""
# sanity check the input args
if not isinstance(appName, str) or not isinstance(appDesc, str) or not isinstance(appVer, str):
raise HalClientError("Driver name/desc/version should be a str type")
if not isinstance(interestedNotification, tuple) and not isinstance(interestedNotification, list):
raise HalClientError("supportedMsgType should be a tuple or list")
self.appName = appName
self.appDesc = appDesc
self.appVer = appVer
self.interestedNotification = list(interestedNotification)
# setup the logging
# self.logger = log
self.pollTimeout = 2000
# update the supported messages
self.HalMsgsHandler = {
"HalClientRegisterRsp": self.recvRegisterMsgCb,
"HalClientHelloRsp": self.recvHelloRspMsgCb,
"HalClientInterestNotificationCfgRsp": self.sendInterestedNotificationsRspCb,
}
self.clientID = None
self.mgrConnection = None
self.pushSock = None
self.pullSock = None
self.disconnected = True
self.seqNum = 0
self.index = -1
self.CfgMsgId_dict = dict(CLI_TO_HAL_MSG_TYPE.items())
def start(self):
"""
start poll the transport socket
:return:
"""
self.logger.debug("Start connect to hal...")
self.connectionSetup()
self.register(self.clientID)
def connectionSetup(self):
"""
Create the connection to the mgr and setup the poller
:return:
"""
self.logger.debug("Create the connection to the mgr....")
# Create a connection to Hal driver mgr
self.mgrConnection = HalTransport(HalTransport.HalTransportClientMgr, HalTransport.HalClientMode,
disconnectHandlerCb=self.connectionDisconnectCb)
def register(self, clientID):
"""
send a register message to Hal and get the device ID from the Hal.
:return:
"""
if clientID is None:
registerMsg = HalMessage("HalClientRegister",
ClientName=self.appName,
ClientDescription=self.appDesc,
ClientVersion=self.appVer)
else:
registerMsg = HalMessage("HalClientRegister",
ClientName=self.appName,
ClientDescription=self.appDesc,
ClientVersion=self.appVer,
ClientID=clientID)
if self.mgrConnection is None:
errMsg = "Cannot send the register since the mgr connection is not setup"
self.logger.error(errMsg)
raise HalClientError(errMsg)
self.logger.debug("Send the register msg to Hal...")
self.mgrConnection.send(registerMsg.Serialize())
bin = self.mgrConnection.recv()
rsp = HalMessage.DeSerialize(bin)
self.recvRegisterMsgCb(rsp)
def _send(self, msg):
if self.pushSock:
self.pushSock.send(msg)
else:
self.logger.error("Cannot send the msg since the push socket is NULL")
def sendMsg(self, cfgMsg):
"""
The configutaion response routine, the driver implementor should fill
sth into this function
:param cfg: The original configutaion message
:return:
"""
if self.disconnected:
self.logger.error("The client is on disconencted state,"
" skip to send the message.")
return
if cfgMsg is None or not isinstance(cfgMsg, t_CliMessage):
self.logger.error("Cannot send a None or incorrect type to HAL")
return
for desc, value in cfgMsg.CliData.ListFields():
if desc.name not in self.CfgMsgId_dict:
self.logger.error("Cannot not find %s" % desc.name)
return
msg = HalMessage("HalConfig", SrcClientID=self.clientID,
SeqNum=self.seqNum,
CfgMsgType=self.CfgMsgId_dict[desc.name],
CfgMsgPayload=cfgMsg.SerializeToString())
self._send(msg.Serialize())
seq = self.seqNum
self.seqNum += 1
return seq
def recvMsg(self, timeout=None):
if self.pullSock:
try:
bin = self.pullSock.recv()
except Exception as e:
print("Got exception when receiving the msg, reason:%s" % str(e))
return None
rsp = HalMessage.DeSerialize(bin)
if rsp.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Get rsp msg fail, reason[%s]" % rsp.msg.Rsp.ErrorDescription)
return None
cli_msg = t_CliMessage()
cli_msg.ParseFromString(rsp.msg.CfgMsgPayload)
return cli_msg
else:
self.logger.error("Cannot receive msg since the pull socket is NULL")
return None
def sayHelloToHal(self):
"""
Send a hello message to verify the agent path is correct
:return:
"""
self.logger.debug("Send a Hello message to Hal")
helloMsg = HalMessage("HalClientHello", ClientID=self.clientID)
self._send(helloMsg.Serialize())
def sendInterestedNotifications(self, notifications):
"""
Send the notifications to the HAL
:param notifications:
:return:
"""
self.logger.debug("Send a Interested notification configuration msg to HAL")
if notifications is not None and not isinstance(notifications, tuple) and not isinstance(notifications, list):
self.logger.error("Cannot set an notification with wrong type, you can pass a tuple or list to it ")
return
configMsg = HalMessage("HalClientInterestNotificationCfg", ClientID=self.clientID,
ClientNotificationMessages=notifications)
self.mgrConnection.send(configMsg.Serialize())
# REQ/RSP
bin = self.mgrConnection.recv()
return bin
def sendInterestedNotificationsRspCb(self, rsp):
"""
Receive a response message from the HAL for the notification rsp callback
:param rsp:
:return:
"""
self.logger.debug("Receive a interest notification response message:" + str(rsp.msg))
def recvHelloRspMsgCb(self, hello):
"""
Call back for Hello Message
:param hello:
:return:
"""
self.logger.debug("Recv a hello message:" + str(hello.msg))
def connectionDisconnectCb(self, msg):
"""
the connection has been detected disconnected , register it again
We have reconenct, we have to assure the regiter message is received by the HAL
:param msg:
:return:
"""
if self.disconnected:
self.logger.debug("A previous event has been processed, skip it!")
return
self.logger.debug("Detected disconnected, register again")
# clean up the push and pull socket
if 0:
self.pushSock.close()
self.pullSock.close()
self.pushSock = None
self.pullSock = None
self.mgrConnection = None
# self.clientID = None #will not set it to none since
self.connectionSetup()
self.mgrConnection.monitor.close()
self.mgrConnection.close()
# create the connection again
self.connectionSetup()
self.register(self.clientID) # The zmq lower part will handle the reconnect
self.disconnected = True
def recvRegisterMsgCb(self, cfg):
"""
the callback handler for the configuration message
:param cfg: the configuration message received frm the Hal
:return:
"""
# self.logger.debug("Recv a Message from the Hal:" % str(cfg.msg))
if cfg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Cannot register to Hal, reason[%s]" % cfg.msg.Rsp.ErrorDescription)
return
self.clientID = cfg.msg.ClientID
# Setup the push and pull connection
self.pullPath = cfg.msg.PathFromHalToClient
self.pushPath = cfg.msg.PathFromClientToHal
# get the index of the path
index = self._getIndexFromPath()
if index == -1:
self.logger.error("Cannot get index from the path [%s]" % self.pushPath)
return
if self.index == -1:
self.index = index
self.pushSock = HalTransport(HalTransport.HalTransportClientAgentPull, HalTransport.HalClientMode,
index=index, socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.pullSock = HalTransport(HalTransport.HalTransportClientAgentPush, HalTransport.HalClientMode,
index=index, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.sendInterestedNotifications(self.interestedNotification)
self.disconnected = False
return
def clientQuery(self):
"""
Send a client query message to get all registered client info
:return:
"""
if self.disconnected:
self.logger.error("The client is on disconencted state,"
" skip to send the message.")
return None
self.logger.debug("Send a client query message to Hal")
clientQueryMsg = HalMessage("HalClientQuery", ClientID=self.clientID)
self.mgrConnection.send(clientQueryMsg.Serialize())
try:
bin = self.mgrConnection.recv()
except Exception as e:
print("Got exception when receiving the msg, reason:%s" % str(e))
return None
rsp = HalMessage.DeSerialize(bin)
if rsp.msg.MsgType != "HalClientQueryRsp":
self.logger.error("Cannot Query client, "
"reason[msgType mismatch:%s]" % rsp.msg.MsgType)
return None
return rsp
def getClientstats(self, clientId):
"""
Send a client statistics request message
:return:
"""
if self.disconnected:
self.logger.error("The client is on disconencted state,"
" skip to send the message.")
return None
self.logger.debug("Send a client statistics message to Hal")
statsQueryMsg = HalMessage("HalAgentStatsReq", ClientID=clientId)
self.mgrConnection.send(statsQueryMsg.Serialize())
try:
bin = self.mgrConnection.recv()
except Exception as e:
print("Got exception when receiving the msg, reason:%s" % str(e))
return None
rsp = HalMessage.DeSerialize(bin)
if rsp.msg.MsgType != "HalAgentStatsRsp":
self.logger.error("Cannot Query client statistics, "
"reason[msgType mismatch:%s]" % rsp.msg.MsgType)
return None
return rsp
def _getIndexFromPath(self):
rePattern = r"/(\d+)/"
ret = re.search(rePattern, self.pushPath)
if ret is not None:
digitStr = ret.group(1)
return int(digitStr)
return -1
def test_eventHandlerMonitor(self):
"""test HalTransport#monitorHandler,
check whether the
EVENT_DISCONNECTED can be handle, if status is false case fail
check
whether the EVENT_CONNECT_RETRIED can be handle, if status before the
timeout/after timeout was wrong, case fail
check whether the
EVENT_CLOSED can be handle, if status before the timeout/after timeout
was wrong, case fail
check whether the unnormal event can be handle, if
status was wrong case fail.
:keyword:HalTransport#monitorHandler
:exception:assertFalse(transport.monitorHandler(msg)),
assertFalse(transport.monitorHandler(msg)),
assertFalse(transport.monitorHandler(msg)),
assertFalse(transport.monitorHandler(msg))
:parameter:
:return:
"""
transport = HalTransport(
HalTransport.HalTransportClientMgr, HalTransport.HalServerMode,
disconnectHandlerCb=None)
msg = {
"event": zmq.EVENT_DISCONNECTED,
}
self.assertFalse(transport.monitorHandler(msg))
transport.socket.disable_monitor()
transport.monitor.close()
transport.close()
transport = HalTransport(
HalTransport.HalTransportClientMgr, HalTransport.HalServerMode,
disconnectHandlerCb=self._disconnectCb)
self.assertTrue(transport.monitorHandler(msg))
msg = {
"event": zmq.EVENT_CONNECT_RETRIED,
}
self.assertFalse(transport.monitorHandler(msg))
time.sleep(transport.socketLogTimeout)
self.assertTrue(transport.monitorHandler(msg))
transport.socket.disable_monitor()
transport.monitor.close()
transport.close()
transport = HalTransport(
HalTransport.HalTransportClientMgr, HalTransport.HalServerMode,
disconnectHandlerCb=self._disconnectCb)
msg = {
"event": zmq.EVENT_CLOSED,
}
self.assertFalse(transport.monitorHandler(msg))
time.sleep(transport.socketLogTimeout)
self.assertTrue(transport.monitorHandler(msg))
msg = {
"event": 10001,
}
self.assertFalse(transport.monitorHandler(msg))
transport.socket.disable_monitor()
transport.monitor.close()
transport.close()
class HalDriverClient(object):
"""The Driver Client for Hal."""
__metaclass__ = AddLoggerToClass
def __init__(self,
drvName,
drvDesc,
drvVer,
supportedMsgType,
supportedNotificationMsgs,
interestedNotification=None):
"""Init.
:param drvName: The driver name, such as BCM3160 Driver
:param drvDesc: A brief description about this driver, such as the driver main functionality description
:param drvVer: Driver specific version, such as 1.0.1
:param supportedMsgType: a tuple or list for the driver supported msg types, the form will be (1, 2, 456, 10)
:param supportedNotificationMsgs: the driver supported notification msg types the form will be (1, 3, 4)
:return: HalDriverClient object
"""
# sanity check the input args
if not isinstance(drvName, str) or not isinstance(
drvDesc, str) or not isinstance(drvVer, str):
raise HalDriverClientError(
"Driver name/desc/version should be a str type")
if not isinstance(supportedMsgType, tuple) and not isinstance(
supportedMsgType, list):
raise HalDriverClientError(
"supportedMsgType should be a tuple or list")
if (supportedNotificationMsgs is not None) and (
not isinstance(supportedNotificationMsgs, list)
and not isinstance(supportedNotificationMsgs, tuple)):
raise HalDriverClientError(
"supportedNotificationMsgs is allowed none or tuple or list")
self.drvname = drvName
self.drvDesc = drvDesc
self.drvVer = drvVer
if None is not interestedNotification:
self.interestedNotification = list(interestedNotification)
else:
self.interestedNotification = None
self.supportedMsgType = list(supportedMsgType)
if supportedNotificationMsgs is not None:
self.supportedNotificationMsgs = list(supportedNotificationMsgs)
else:
self.supportedNotificationMsgs = None
self.recvNtf = 0
self.pollTimeout = 1000
# update the supported messages
self.HalMsgsHandler = {
"HalClientRegisterRsp": self.recvRegisterMsgCb,
"HalClientHelloRsp": self.recvHelloRspMsgCb,
"HalConfig": self.recvCfgMsgCb,
"HalConfigRsp": self.recvCfgMsgRspCb,
"HalClientInterestNotificationCfgRsp":
self.sendInterestedNotificationsRspCb,
"HalNotification": self.recvNotificationCb,
}
self.drvID = None
self.mgrConnection = None
self.pushSock = None
self.pullSock = None
self.pullPath = None
self.pushPath = None
self.disconnected = True
self.poller = None
self.index = -1
self.seqNum = 0
def start(self):
"""Start polling the transport socket.
:return:
"""
self.logger.debug("Start the driver client poll...")
self.connectionSetup()
self.register(self.drvID)
lastTimeout = time()
while True: # Todo we should support quit flag?
socks = self.poller.poll(self.pollTimeout)
if time() - lastTimeout > self.pollTimeout / 1000:
lastTimeout = time()
# self.logger.debug("Got a timeout event")
if self.recvNtf:
rcp_msg = t_RcpMessage()
rcp_msg.RpdDataMessage.RpdDataOperation = t_RpdDataMessage.RPD_CFG_READ
rcp_msg.RcpMessageType = t_RcpMessage.RPD_CONFIGURATION
rcp_msg.RpdDataMessage.RpdData.CopyFrom(config())
payload = rcp_msg.SerializeToString()
self.sendCfgMsg(1025, payload)
self.recvNtf -= 1
if not socks:
continue
for sock in socks:
if self.pushSock is not None and sock == self.pushSock.monitor:
self.pushSock.monitorHandler(recv_monitor_message(sock))
continue
if self.pullSock is not None and sock == self.pullSock.monitor:
self.pullSock.monitorHandler(recv_monitor_message(sock))
continue
if sock == self.mgrConnection.monitor:
self.mgrConnection.monitorHandler(
recv_monitor_message(sock))
continue
if socks[sock] == HalPoller.POLLIN:
try:
bin = sock.recv(flags=zmq.NOBLOCK)
msg = HalMessage.DeSerialize(bin)
self.logger.debug("Got a zmq msg:%s" % msg.msg)
if msg.type in self.HalMsgsHandler:
handler = self.HalMsgsHandler[msg.type]
handler(msg)
else:
self.logger.warn("Unsupported msg type:%s" %
msg.type)
except zmq.ZMQError as e:
self.logger.debug(
"Geting an error when trying with nonblock read:" +
str(e))
except Exception as e:
self.logger.debug("Geting an error:" + str(e))
continue
def connectionSetup(self):
"""Create the connection to the mgr and setup the poller.
:return:
"""
self.logger.debug("Create the connection to the mgr....")
# Create a connection to Hal driver mgr
self.mgrConnection = HalTransport(HalTransport.HalTransportClientMgr,
HalTransport.HalClientMode)
self.mgrConnection.connects()
self.HalMsgsHandler[self.mgrConnection.socket] = self.recvRegisterMsgCb
# create the poller
if self.poller is None:
self.poller = HalPoller()
# register the mgr socket
self.poller.register(self.mgrConnection.socket)
self.poller.register(self.mgrConnection.monitor)
def register(self, driverID):
"""Send a register message to Hal and get the client ID from the Hal.
:return:
"""
if driverID is None:
registerMsg = HalMessage(
"HalClientRegister",
ClientName=self.drvname,
ClientDescription=self.drvDesc,
ClientVersion=self.drvVer,
ClientSupportedMessages=self.supportedMsgType,
ClientSupportedNotificationMessages=self.
supportedNotificationMsgs)
else:
registerMsg = HalMessage(
"HalClientRegister",
ClientName=self.drvname,
ClientDescription=self.drvDesc,
ClientVersion=self.drvVer,
ClientSupportedMessages=self.supportedMsgType,
ClientSupportedNotificationMessages=self.
supportedNotificationMsgs,
ClientID=driverID)
if self.mgrConnection is None:
errMsg = "Cannot send the register since the mgr connection is not setup"
self.logger.error(errMsg)
raise HalDriverClientError(errMsg)
self.logger.debug("Send the register msg to Hal...")
self.mgrConnection.send(registerMsg.Serialize())
def send(self, msg):
if self.pushSock:
self.pushSock.send(msg)
else:
self.logger.warning(" ".join([
str(self.drvname),
str(self.drvID),
":Cannot send the msg since the push socket is none"
]))
def sayHelloToHal(self):
"""Send a hello message to verify the agent path is correct.
:return:
"""
self.logger.debug(" ".join([
str(self.drvname),
str(self.drvID), ":Send a Hello message to Hal"
]))
helloMsg = HalMessage("HalClientHello", ClientID=self.drvID)
self.send(helloMsg.Serialize())
def recvHelloRspMsgCb(self, hello):
"""Call back for Hello Message.
:param hello:
:return:
"""
self.logger.debug("Recv a hello message")
def sendInterestedNotifications(self, notifications):
"""Send the notifications to the HAL.
:param notifications:
:return:
"""
self.logger.debug(
"Send a Interested notification configuration msg to HAL")
if notifications is not None and not isinstance(
notifications, tuple) and not isinstance(notifications, list):
self.logger.error(
"Cannot set an notification with wrong type, you can pass a tuple or list to it "
)
return
configMsg = HalMessage("HalClientInterestNotificationCfg",
ClientID=self.drvID,
ClientNotificationMessages=notifications)
self.mgrConnection.send(configMsg.Serialize())
def sendInterestedNotificationsRspCb(self, rsp):
"""Receive a response message from the HAL for the notification rsp
callback.
:param rsp:
:return:
"""
self.logger.debug("Receive a interest notification response message:" +
str(rsp.msg))
def recvNotificationCb(self, ntf):
"""Receive a notification message from the HAL.
:param ntf:
:return:
"""
self.logger.debug("Receive a interest notification message:" +
str(ntf.msg))
self.recvNtf += 1
def recvCfgMsgCb(self, cfg):
"""Receive a configuration message from the Hal, processing it.
:param cfg:
:return:
"""
self.logger.debug(
"Recv a configuration message, send a fake rsp to it")
self.sendCfgRspMsg(cfg)
def recvCfgMsgRspCb(self, cfg):
"""Receive a configuration response message from the Hal, processing it.
:param cfg:
:return:
"""
self.logger.debug("Recv a configuration response message:" +
str(cfg.msg))
def connectionSetupCb(self):
pass
def connectionDisconnectCb(self, msg):
"""The connection has been detected disconnected , register it again.
:param msg:
:return:
"""
if self.disconnected:
self.logger.debug("A previous event has been processed, skip it!")
return
self.logger.debug("Detected disconnected, register again")
# clean up the push and pull socket
# self.poller.unregister(self.pullSock.socket)
self.poller.unregister(self.mgrConnection.socket)
self.poller.unregister(self.mgrConnection.monitor)
self.mgrConnection.socket.disable_monitor()
self.mgrConnection.monitor.close()
self.mgrConnection.close()
# re-register the message
self.connectionSetup()
self.register(self.drvID)
# The zmq lower part will handle the reconnect
self.disconnected = True
def sendNotificationMsg(self, notificationType, notificationPayload):
"""Send a notification to Hal.
:param notificationType: The notification type, the client must declare the notification type to Hal first
:param notificationPayload: the string payload, Hal will not touch this part
:return:
"""
self.logger.debug("send a a notification message to Hal")
notfication = HalMessage("HalNotification",
ClientID=self.drvID,
HalNotificationType=notificationType,
HalNotificationPayLoad=notificationPayload)
self.send(notfication.Serialize())
def sendCfgMsg(self, cfgMsgType, cfgMsgContent):
"""The configutaion response routine, the driver implementor should
fill sth into this function.
:param cfg: The original configuration message
:return:
"""
self.logger.debug("Send a config message to HAL: %r", cfgMsgContent)
if self.disconnected:
self.logger.warn(
"The client is on disconencted state, skip to send the message."
)
return
if cfgMsgContent is None or not isinstance(cfgMsgContent, str):
self.logger.error(
"Cannot send a None or incorrect type to HAL, str is required for msg"
)
return
msg = HalMessage("HalConfig",
SrcClientID=self.drvID,
SeqNum=self.seqNum,
CfgMsgType=cfgMsgType,
CfgMsgPayload=cfgMsgContent)
self._sendMsg(msg.Serialize())
seq = self.seqNum
self.seqNum += 1
return seq
def sendCfgRspMsg(self, cfg, rsp=None):
"""The configuration response routine, the driver implementor should
fill sth into this function.
:param cfg: The original configuration message
:param rsp: respond
:return:
"""
cfgMsg = cfg.msg
if rsp == None:
rsp = {"Status": HalCommon_pb2.SUCCESS, "ErrorDescription": ""}
msg = HalMessage("HalConfigRsp",
SrcClientID=cfgMsg.SrcClientID,
SeqNum=cfgMsg.SeqNum,
Rsp=rsp,
CfgMsgType=cfgMsg.CfgMsgType,
CfgMsgPayload=cfgMsg.CfgMsgPayload)
if None is not self.pushSock:
self.pushSock.send(msg.Serialize())
def recvRegisterMsgCb(self, cfg):
"""The callback handler for the configuration message.
:param cfg: the configuration message received frm the Hal
:return:
"""
# self.logger.debug("Recv a Message from the Hal:" % str(cfg.msg))
if cfg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Cannot register to Hal, reason[%s]" %
cfg.msg.Rsp.ErrorDescription)
return
self.drvID = cfg.msg.ClientID
# Setup the push and pull connection
self.pullPath = cfg.msg.PathFromHalToClient
self.pushPath = cfg.msg.PathFromClientToHal
# get the index of the path
index = self._getIndexFromPath()
if index == -1:
self.logger.error("Cannot get index from the path [%s]" %
self.pushPath)
return
if self.index == -1:
self.index = index
self.pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.pullSock = HalTransport(
HalTransport.HalTransportClientAgentPush,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.connectionDisconnectCb)
# register to the poller
self.poller.register(self.pushSock.monitor)
self.poller.register(self.pullSock.monitor)
self.poller.register(self.pullSock.socket)
# send Hello To Hal
self.sayHelloToHal()
if None is not self.interestedNotification:
self.sendInterestedNotifications(self.interestedNotification)
self.disconnected = False
return
def _getIndexFromPath(self):
rePattern = r"/(\d+)/"
ret = re.search(rePattern, self.pushPath)
if ret is not None:
digitStr = ret.group(1)
return int(digitStr)
return -1
def _sendMsg(self, msg):
if self.pushSock:
self.pushSock.send(msg)
else:
self.logger.error(
"Cannot send the msg since the push socket is NULL")
class HalClient(object):
"""The Client for Hal."""
__metaclass__ = AddLoggerToClass
def __init__(self,
appName,
appDesc,
appVer,
interestedNotification,
logConfigurePath=None,
supportedMsgType=[]):
"""
:param appName: The application name, such as RPD CLI
:param appDesc: A brief description about this application, such as the functionality description
:param appVer: Driver specific version, such as 1.0.1
:param interestedNotification: a tuple or list for the application interested msg types, the form will be
(1, 2, 456, 10)
:param supportedMsgType: a tuple or list of HalConfig message types, the form will be (5000,)
:return: HalClient object
"""
# sanity check the input args
if not isinstance(appName, str) or not isinstance(
appDesc, str) or not isinstance(appVer, str):
raise HalClientError(
"Driver name/desc/version should be a str type")
if not isinstance(interestedNotification, tuple) and not isinstance(
interestedNotification, list):
raise HalClientError(
"interestedNotification should be a tuple or list")
if not isinstance(supportedMsgType, list):
raise HalClientError("supportedMsgType should be a list")
self.appName = appName
self.appDesc = appDesc
self.appVer = appVer
self.interestedNotification = list(interestedNotification)
self.supportedMsgType = list(supportedMsgType)
self.pollTimeout = 2000
# update the supported messages
self.HalMsgsHandler = {
"HalClientRegisterRsp":
self.recvRegisterMsgCb,
"HalSetLoggingLevelRsp":
self.recvHalSetLoggingLevelRspCb,
"HalClientHelloRsp":
self.recvHelloRspMsgCb,
"HalConfigRsp":
self.recvCfgMsgRspCb,
"HalClientInterestNotificationCfgRsp":
self.sendInterestedNotificationsRspCb,
}
self.clientID = None
self.mgrConnection = None
self.pushSock = None
self.pullSock = None
self.disconnected = True
self.poller = None
self.seqNum = 0
self.index = -1
def start(self):
"""Start polling the transport socket.
:return:
"""
self.logger.debug("Start the client poll...")
self.connectionSetup()
self.register(self.clientID)
lastTimeout = time()
sendOnce = False
while True: # Todo we should support quit flag?
socks = self.poller.poll(self.pollTimeout)
if time() - lastTimeout > self.pollTimeout / 1000:
lastTimeout = time()
self.logger.debug("Got a timeout event")
if not sendOnce:
# self.sendCfgMsg(100, "hello")
self.setHalDebugLevel("HalMain", logging.INFO)
sendOnce = True
if not socks:
continue
for sock in socks: # FIXME do we need to continue recv from the monitor interface?
if self.pushSock is not None and sock == self.pushSock.monitor:
self.pushSock.monitorHandler(recv_monitor_message(sock))
continue
if self.pullSock is not None and sock == self.pullSock.monitor:
self.pullSock.monitorHandler(recv_monitor_message(sock))
continue
if self.mgrConnection is not None and sock == self.mgrConnection.monitor:
self.mgrConnection.monitorHandler(
recv_monitor_message(sock))
continue
if socks[sock] == HalPoller.POLLIN:
try:
bin = sock.recv(flags=zmq.NOBLOCK)
msg = HalMessage.DeSerialize(bin)
self.logger.debug("Got a zmq msg:%s" % msg.msg)
if msg.type in self.HalMsgsHandler:
handler = self.HalMsgsHandler[msg.type]
handler(msg)
else:
self.logger.warn("Unsupported msg type:%s" %
msg.type)
except zmq.ZMQError as e:
self.logger.debug(
"Got an error when trying with non-block read:" +
str(e))
except Exception as e:
self.logger.error("Error happens, reason:%s" % str(e))
continue
# self.logger.error("Cannot handle the event, No handler for
# it")
def connectionSetup(self):
"""Create the connection to the mgr and setup the poller.
:return:
"""
self.logger.debug("Create the connection to the mgr....")
# Create a connection to Hal driver mgr
self.mgrConnection = HalTransport(
HalTransport.HalTransportClientMgr,
HalTransport.HalClientMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.HalMsgsHandler[self.mgrConnection.socket] = self.recvRegisterMsgCb
# create the poller
if self.poller is None:
self.poller = HalPoller()
# register the mgr socket
self.poller.register(self.mgrConnection.socket)
self.poller.register(self.mgrConnection.monitor)
def register(self, clientID):
"""Send a register message to Hal and get the client ID from the Hal.
:return:
"""
if clientID is None:
if len(self.supportedMsgType) > 0:
registerMsg = HalMessage(
"HalClientRegister",
ClientName=self.appName,
ClientDescription=self.appDesc,
ClientVersion=self.appVer,
ClientSupportedMessages=self.supportedMsgType)
else:
registerMsg = HalMessage("HalClientRegister",
ClientName=self.appName,
ClientDescription=self.appDesc,
ClientVersion=self.appVer)
else:
if len(self.supportedMsgType) > 0:
registerMsg = HalMessage(
"HalClientRegister",
ClientName=self.appName,
ClientDescription=self.appDesc,
ClientVersion=self.appVer,
ClientSupportedMessages=self.supportedMsgType,
ClientID=clientID)
else:
registerMsg = HalMessage("HalClientRegister",
ClientName=self.appName,
ClientDescription=self.appDesc,
ClientVersion=self.appVer,
ClientID=clientID)
if self.mgrConnection is None:
errMsg = "Cannot send the register since the mgr connection is not setup"
self.logger.error(errMsg)
raise HalClientError(errMsg)
self.logger.debug("Send the register msg to Hal...")
self.mgrConnection.send(registerMsg.Serialize())
def _sendMsg(self, msg):
if self.pushSock:
self.pushSock.send(msg)
else:
self.logger.error(
"Cannot send the msg since the push socket is None, msg:%s",
str(msg))
def sayHelloToHal(self):
"""Send a hello message to verify the agent path is correct.
:return:
"""
self.logger.debug(" ".join([
str(self.appName),
str(self.clientID), ":Send a Hello message to Hal"
]))
helloMsg = HalMessage("HalClientHello", ClientID=self.clientID)
self._sendMsg(helloMsg.Serialize())
def sendNotificationMsg(self, notificationType, notificationPayload):
"""Send a notification to Hal.
:param notificationType: The notification type, the client must declare the notification type to Hal first
:param notificationPayload: the string payload, Hal will not touch this part
:return:
"""
self.logger.debug("send a notification message to Hal")
notfication = HalMessage("HalNotification",
ClientID=self.clientID,
HalNotificationType=notificationType,
HalNotificationPayLoad=notificationPayload)
self.pushSock.send(notfication.Serialize())
def sendInterestedNotifications(self, notifications):
"""Send the notifications to the HAL.
:param notifications:
:return:
"""
self.logger.debug(
"Send a Interested notification configuration msg to HAL")
if notifications is not None and not isinstance(
notifications, tuple) and not isinstance(notifications, list):
self.logger.error(
"Cannot set an notification with wrong type, you can pass a tuple or list to it "
)
return
configMsg = HalMessage("HalClientInterestNotificationCfg",
ClientID=self.clientID,
ClientNotificationMessages=notifications)
self.mgrConnection.send(configMsg.Serialize())
def sendInterestedNotificationsRspCb(self, rsp):
"""Receive a response message from the HAL for the notification rsp
callback.
:param rsp:
:return:
"""
self.logger.debug("Receive a interest notification response message:" +
str(rsp.msg))
def recvHelloRspMsgCb(self, hello):
"""Call back for Hello Message.
:param hello:
:return:
"""
self.logger.debug("Recv a hello message:" + str(hello.msg))
def recvCfgMsgRspCb(self, cfg):
"""Receive a configuration response message from the Hal, processing
it.
:param cfg:
:return:
"""
self.logger.debug("Recv a configuration response message:" +
str(cfg.msg))
def connectionSetupCb(self):
pass
def connectionDisconnectCb(self, msg):
"""TODO: This comment is confusing. Need to be cleaned up.
The connection has been detected disconnected , register it again
We have reconenct, we have to assure the regiter message is received by the HAL
:param msg:
:return:
"""
if self.disconnected:
self.logger.debug("A previous event has been processed, skip it!")
return
self.logger.debug("Detected disconnected, register again")
# clean up the push and pull socket
if 0:
self.pushSock.close()
self.pullSock.close()
self.poller.unregister(self.pullSock.socket)
self.poller.unregister(self.pullSock.monitor)
self.poller.unregister(self.pullSock.monitor)
self.pushSock = None
self.pullSock = None
self.mgrConnection = None
# self.clientID = None #will not set it to none since
self.connectionSetup()
self.poller.unregister(self.mgrConnection.socket)
self.poller.unregister(self.mgrConnection.monitor)
self.mgrConnection.socket.disable_monitor()
self.mgrConnection.monitor.close()
self.mgrConnection.close()
# create the connection again
self.connectionSetup()
self.register(self.clientID)
# The zmq lower part will handle the reconnect
self.disconnected = True
def sendCfgMsg(self, cfgMsgType, cfgMsgContent):
"""The configutaion response routine, the driver implementor
should fill sth into this function.
:param cfg: The original configutaion message
:return:
"""
self.logger.debug("Send a config message to HAL: %r", cfgMsgContent)
if self.disconnected:
self.logger.warn(
"The client is on disconnected state, skip to send the message."
)
return
if cfgMsgContent is None or not isinstance(cfgMsgContent, str):
self.logger.error(
"Cannot send a None or incorrect type to HAL, str is required for msg"
)
return
msg = HalMessage("HalConfig",
SrcClientID=self.clientID,
SeqNum=self.seqNum,
CfgMsgType=cfgMsgType,
CfgMsgPayload=cfgMsgContent)
self._sendMsg(msg.Serialize())
seq = self.seqNum
self.seqNum += 1
return seq
def sendCfgRspMsg(self, cfg, rsp=None):
"""The configuration response routine, the driver implementor should
fill sth into this function.
:param cfg: The original configuration message
:param rsp: respond
:return:
"""
cfgMsg = cfg.msg
msg = HalMessage("HalConfigRsp",
SrcClientID=cfgMsg.SrcClientID,
SeqNum=cfgMsg.SeqNum,
Rsp=rsp,
CfgMsgType=cfgMsg.CfgMsgType,
CfgMsgPayload=cfgMsg.CfgMsgPayload)
if None is not self.pushSock:
self.pushSock.send(msg.Serialize())
def setHalDebugLevel(self, module, level):
"""Set the HAl debug level.
:param module: the Hal module name
:param level: the logging level
:return:
"""
self.logger.info("Set hal module[%s] to level [%s]" %
(module, logging.getLevelName(level)))
if self.disconnected:
self.logger.warn("Cannot send the HAL debug configuration to HAL"
" since the client is in disconnected state.")
return
msg = HalMessage("HalSetLoggingLevel",
ClientID=self.clientID,
Module=module,
LoggingLevel=level)
self.mgrConnection.send(msg.Serialize())
def recvHalSetLoggingLevelRspCb(self, rsp):
self.logger.debug(str(rsp.msg))
def recvRegisterMsgCb(self, cfg):
"""The callback handler for the configuration message.
:param cfg: the configuration message received frm the Hal
:return:
"""
# self.logger.debug("Recv a Message from the Hal:" % str(cfg.msg))
if cfg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Cannot register to Hal, reason[%s]" %
cfg.msg.Rsp.ErrorDescription)
return
self.clientID = cfg.msg.ClientID
# Setup the push and pull connection
self.pullPath = cfg.msg.PathFromHalToClient
self.pushPath = cfg.msg.PathFromClientToHal
# get the index of the path
index = self._getIndexFromPath()
if index == -1:
self.logger.error("Cannot get index from the path [%s]" %
self.pushPath)
return
if self.index == -1:
self.index = index
self.pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.pullSock = HalTransport(
HalTransport.HalTransportClientAgentPush,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.connectionDisconnectCb)
# register to the poller
self.poller.register(self.pullSock.socket)
self.poller.register(self.pushSock.monitor)
self.poller.register(self.pullSock.monitor)
# send Hello To Hal
self.sayHelloToHal()
self.sendInterestedNotifications(self.interestedNotification)
self.disconnected = False
return
def _getIndexFromPath(self):
rePattern = r"/(\d+)/"
ret = re.search(rePattern, self.pushPath)
if ret is not None:
digitStr = ret.group(1)
return int(digitStr)
return -1
class HalAgentClient(HalAgent):
"""This class is the client agent class.
the class will have the following API:
* disconnectHandler: the
handler will be invoked when the transport layer get a disconnect
event, the function will clean the agent
resources, including the socket resource, remove it from the global
runtime DB.
* sendMsg: This API will send message via
Agent's pushsock channel.
* handleClientHello: The API will handle
the Hello message
* handleConfigRsp: This API will handle the
configuration response HalMessage from client
* handleNotification: This API will handle the notification HalMessage
"""
ClientIndex = 0
# self handle table
HalGlobal.gHandleTable["HalClientHello"] = "handleClientHello"
HalGlobal.gHandleTable["HalConfig"] = "handleConfig"
HalGlobal.gHandleTable["HalConfigRsp"] = "handleConfigRsp"
HalGlobal.gHandleTable["HalNotification"] = "handleNotification"
__metaclass__ = AddLoggerToClass
def __init__(self, poller, clientID, disconnectHandler, reuseIndex=None):
"""The function will generate the client agent object. the main
function is to create the socket channel. for Hal the sock channel
works at the server mode, it will listen at these sockets.
:param poller: a global poller, the transport socket and the monitor socket will register into it.
:param ClientID: a client UUID
:param disconnectHandler: the manager disconnect handler, will be called with agent gets a disconnect event.
:param reuseIndex: for the client restart, it will provide it's previous ID, the agent will reuse
these ID and use the same transport path.
:return: agent obj
"""
super(HalAgentClient, self).__init__()
if reuseIndex is None:
# Generate the client index
while True:
index = HalAgentClient.ClientIndex
HalAgentClient.ClientIndex += 1
if str(index) not in HalGlobal.gClientIndex.values():
break
else:
index = reuseIndex
self.index = index
if clientID not in HalGlobal.gClientIndex:
HalGlobal.gHalClientDbConnection.addMsgtoDB(
"ClientIndex", {clientID: index}, expired=False)
# Start the transport
self.transportPush = HalTransport(
HalTransport.HalTransportClientAgentPush, HalTransport.HalServerMode,
index=index, socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.disconnectHandler)
# for the push, we don't need to register to the poller
if self.transportPush.monitor:
poller.register(self.transportPush.monitor)
HalGlobal.gMonitorSocketMappingTable[
self.transportPush.monitor] = self.transportPush
# start the pull transport
self.transportPull = HalTransport(
HalTransport.HalTransportClientAgentPull, HalTransport.HalServerMode,
index=index, socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.disconnectHandler)
poller.register(self.transportPull.socket)
# add the pull socket to the socket agent mapping table
HalGlobal.gSocketAgentMappingTable[self.transportPull.socket] = self
# process the monitor
if self.transportPull.monitor:
poller.register(self.transportPull.monitor)
HalGlobal.gMonitorSocketMappingTable[
self.transportPull.monitor] = self.transportPull
# For other variables
self.mgrDisconnectCb = disconnectHandler
self.disconnectProcessed = False
self.poller = poller
self.clientID = clientID
# put the message into the resend list
self.logger.debug("Check the last unsuccessful message.%s for client[%s]" % (
HalGlobal.gRestartResendMsg, self.clientID))
if self.clientID:
for key in HalGlobal.gRestartResendMsg:
if key.startswith(self.clientID):
self.logger.debug("Add message[%s] to resend list" % key)
cfg = HalGlobal.gRestartResendMsg[key]
seqNum = cfg.msg.SeqNum if cfg.msg.HasField(
"SeqNum") else 0
self.addToResendList(seq=seqNum, sendagent=self, msg=cfg)
def disconnectHandler(self, transport):
"""the function will be invoked when the transport layer get a
disconnect event, the fucntion will clean the agent resources,
including the socket resource, remove it from the global runtime DB.
:param transport: the transport object, pull/push
:return:
"""
self.logger.info(
"Got a client[%s] disconnect event, process it in client agent" % self.clientID)
# we have two transport layer can trigger this handler, we only need one time to process,
# this flag is used for this
if self.disconnectProcessed:
self.logger.info(
"client disconnect event has been processed")
return
# unregister/close the monitor socket
if self.transportPull.monitor:
HalGlobal.gMonitorSocketMappingTable.pop(
self.transportPull.monitor)
self.poller.unregister(self.transportPull.monitor)
self.transportPull.socket.disable_monitor()
self.transportPull.monitor.close()
if self.transportPush.monitor:
HalGlobal.gMonitorSocketMappingTable.pop(
self.transportPush.monitor)
self.poller.unregister(self.transportPush.monitor)
self.transportPush.socket.disable_monitor()
self.transportPush.monitor.close()
# call the mgr callback to process the disconnect event
self.mgrDisconnectCb(self)
# remove the transportPull from the poller
self.poller.unregister(self.transportPull.socket)
# remove from the socket agent mapping table
HalGlobal.gSocketAgentMappingTable.pop(self.transportPull.socket)
# Remove from the global Agent DB
self.removeFromAgentDB()
# close the push and pull, monitor socket
self.transportPull.close()
self.transportPush.close()
self.disconnectProcessed = True
def sendMsg(self, msg):
"""Send a message via the transport push socket.
:param msg: a stringlized msg, not the HAlMessage
:return:
"""
if msg is None:
self.logger.error(
"The msg is None, skip invoking the low level function")
return
self.transportPush.send(msg)
def handleClientHello(self, hello):
"""The Hello message handler.
:param hello: which is a HalMessage, hold all the info about the hello message
:return: NA
"""
self.logger.debug("Send out the hello rsp message")
# update the stats
self.stats.NrMsgs += 1
self.stats.NrHelloMsgs += 1
if hello is None:
msg = "Cannot handle a none client hello message"
self.logger.error(msg)
self.stats.NrErrorMsgs += 1
raise Exception(msg)
rsp = HalMessage("HalClientHelloRsp",
ClientID=hello.msg.ClientID)
# send out
self.transportPush.send(rsp.Serialize())
self.stats.NrHelloRspMsgs += 1
def handleConfigRsp(self, cfgRsp):
"""This API will handle the configuration response HalMessage from
client.
:param cfgRsp:
:return:
"""
if cfgRsp is None:
msg = "Cannot handle a none config response message"
self.logger.error(msg)
raise Exception(msg)
HalGlobal.gHalMsgDbConnection.removeMsgFromDB(
cfgRsp.msg.SrcClientID + "-" + str(cfgRsp.msg.SeqNum))
HalGlobal.gDispatcher.dispatchCfgRspMessage(self, cfgRsp)
self.stats.NrCfgRspMsgs += 1
def handleNotification(self, notification):
"""This API will handle the notification HalMessage.
:param notification: the notification HalMessage
:return:
"""
if notification is None:
msg = "Cannot handle the notification since the msg is None"
self.logger.error(msg)
raise Exception(msg)
# update the stats
self.stats.NrNotifyMsgs += 1
self.stats.NrMsgs += 1
HalGlobal.gDispatcher.dispatchNotificationMsg(self, notification)
def handleConfig(self, cfg):
"""The configuration HalMessage handler.
:param cfg: The Config message from the client
:return:
"""
if cfg is None:
msg = "Cannot handle a none config message"
self.logger.error(msg)
raise Exception(msg)
# Add the message to the DB
seqNum = cfg.msg.SeqNum if cfg.msg.HasField("SeqNum") else 0
msgBinary = cfg.originalBinary \
if cfg.originalBinary else cfg.Serialize()
# add the msg to DB
HalGlobal.gHalMsgDbConnection.addMsgtoDB(
msgKey=cfg.msg.SrcClientID + "-" + str(seqNum),
msg={
"ClientID": cfg.msg.SrcClientID,
"Msg": msgBinary
}
)
# Update the stats
self.stats.NrMsgs += 1
self.stats.NrCfgMsgs += 1
# first, process the resendList
self.processResendList()
# Dispatch this message to the correct client
ret = HalGlobal.gDispatcher.dispatchCfgMessage(self, cfg)
if ret == -1:
self.addToResendList(seq=seqNum, sendagent=self, msg=cfg)
class HalPtpDriver(HalDriverClient):
"""The Driver Client for Hal."""
SYNC = "ALIGNED"
LOS = "LOSS OF SYNC"
__metaclass__ = AddLoggerToClass
def __init__(self,
drvName,
drvDesc,
drvVer,
supportedMsgType,
supportedNotificationMsgs,
logConfigurePath=None):
"""Init.
:param drvName: The driver name, such as BCM3160 Driver
:param drvDesc: A brief description about this driver, such as the
driver main functionality description
:param drvVer: Driver specific version, such as 1.0.1
:param supportedMsgType: a tuple or list for the driver supported
msg types, the form will be (1, 2, 456, 10)
:param supportedNotificationMsgs: the driver supported notification
msg types the form will be (1, 3, 4)
:return: HalDriverClient object
"""
super(HalPtpDriver,
self).__init__(drvName, drvDesc, drvVer, supportedMsgType,
supportedNotificationMsgs, logConfigurePath)
# update the supported messages
self.HalMsgsHandler = {
"HalClientRegisterRsp": self.recvRegisterMsgCb,
"HalClientHelloRsp": self.recvHelloRspMsgCb,
"HalConfig": self.recvCfgMsgCb,
}
self.HalConfigMsgHandlers = {
MsgTypePtpStatusGet: self.ptp_status_get,
MsgTypeRdtiConfig: self.config_rdti,
}
self.ptpStatus = self.LOS
self.ptpNewStatus = self.LOS
self.dispatcher = Dispatcher()
def start(self, simulate_mode=False):
"""Start polling the transport socket.
:return:
"""
self.logger.info("Start the driver client poll...")
self.connectionSetup()
self.logger.info("Connection setup done...")
self.logger.info("Begin register...")
self.register(self.drvID)
self.logger.info("End of register...")
self.dispatcher.loop()
def ptpdrv_hal_cb(self, sock, mask):
self.logger.debug("Receive prp drv event")
if self.pushSock is not None and sock == self.pushSock.monitor:
self.pushSock.monitorHandler(recv_monitor_message(sock))
return
if self.pullSock is not None and sock == self.pullSock.monitor:
self.pullSock.monitorHandler(recv_monitor_message(sock))
return
if sock == self.mgrConnection.monitor:
self.mgrConnection.monitorHandler(recv_monitor_message(sock))
return
while sock.getsockopt(zmq.EVENTS) and zmq.POLLIN:
try:
bin = sock.recv(flags=zmq.NOBLOCK)
msg = HalMessage.DeSerialize(bin)
self.logger.debug("Got a zmq msg:%s type:%s" %
(msg.msg, msg.type))
if msg.type in self.HalMsgsHandler:
handler = self.HalMsgsHandler[msg.type]
handler(msg)
except zmq.ZMQError as e:
self.logger.debug(
"Got an error when trying with nonblock read:" + str(e))
break
except Exception as e:
self.logger.warning("Got an un-expected error:%s", str(e))
break
def register(self, DriverID):
"""Send a register message to Hal and get the client ID from the Hal.
:return:
"""
if DriverID is None:
registerMsg = HalMessage(
"HalClientRegister",
ClientName=self.drvname,
ClientDescription=self.drvDesc,
ClientVersion=self.drvVer,
ClientSupportedMessages=self.supportedMsgType,
ClientSupportedNotificationMessages=self.
supportedNotificationMsgs)
else:
registerMsg = HalMessage(
"HalClientRegister",
ClientName=self.drvname,
ClientDescription=self.drvDesc,
ClientVersion=self.drvVer,
ClientSupportedMessages=self.supportedMsgType,
ClientSupportedNotificationMessages=self.
supportedNotificationMsgs,
ClientID=DriverID)
if self.mgrConnection is None:
errMsg = "Cannot send the register since the mgr connection is not setup"
self.logger.error(errMsg)
raise HalDriverClientError(errMsg)
self.logger.debug("Send the register msg to Hal...")
self.mgrConnection.send(registerMsg.Serialize())
def recvRegisterMsgCb(self, cfg):
"""The callback handler for the configuration message.
:param cfg: the configuration message received frm the Hal
:return:
"""
self.logger.debug("Recv a register rsp Message from the Hal: %s" %
cfg.msg)
if cfg.msg.Rsp.Status != HalCommon_pb2.SUCCESS:
self.logger.error("Cannot register to Hal, reason[%s]",
cfg.msg.Rsp.ErrorDescription)
return
self.drvID = cfg.msg.ClientID
# Setup the push and pull connection
self.pullPath = cfg.msg.PathFromHalToClient
self.pushPath = cfg.msg.PathFromClientToHal
# get the index of the path
index = self._getIndexFromPath()
if index == -1:
self.logger.error("Cannot get index from the path [%s]" %
self.pushPath)
return
if self.index == -1:
self.index = index
self.pushSock = HalTransport(
HalTransport.HalTransportClientAgentPull,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPushMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.pullSock = HalTransport(
HalTransport.HalTransportClientAgentPush,
HalTransport.HalClientMode,
index=index,
socketMode=HalTransport.HalSocketPullMode,
disconnectHandlerCb=self.connectionDisconnectCb)
# register to the poller
self.dispatcher.fd_register(self.pullSock.socket, zmq.POLLIN,
self.ptpdrv_hal_cb)
self.dispatcher.fd_register(self.pushSock.monitor, zmq.POLLIN,
self.ptpdrv_hal_cb)
self.dispatcher.fd_register(self.pullSock.monitor, zmq.POLLIN,
self.ptpdrv_hal_cb)
# send Hello To Hal
self.sayHelloToHal()
if self.interestedNotification is not None:
self.sendInterestedNotifications(self.interestedNotification)
self.disconnected = False
return
def connectionSetup(self):
"""Create the connection to the mgr and setup the poller.
:return:
"""
self.logger.info("Create the connection to the mgr....")
# Create a connection to Hal driver mgr
# Create a connection to Hal driver mgr
self.mgrConnection = HalTransport(
HalTransport.HalTransportClientMgr,
HalTransport.HalClientMode,
disconnectHandlerCb=self.connectionDisconnectCb)
self.mgrConnection.connects()
self.HalMsgsHandler[self.mgrConnection.socket] = self.recvRegisterMsgCb
self.HalMsgsHandler[self.mgrConnection.socket] = self.recvRegisterMsgCb
# register the mgr socket
self.dispatcher.fd_register(self.mgrConnection.socket, zmq.POLLIN,
self.ptpdrv_hal_cb)
self.dispatcher.fd_register(self.mgrConnection.monitor, zmq.POLLIN,
self.ptpdrv_hal_cb)
def connection_cleanup(self):
"""Close the connection to the mgr.
:return:
"""
if self.disconnected:
self.logger.debug("A previous event has been processed, skip it!")
return
if self.mgrConnection is not None:
self.dispatcher.fd_unregister(self.mgrConnection.socket)
self.dispatcher.fd_unregister(self.mgrConnection.monitor)
self.mgrConnection.socket.disable_monitor()
self.mgrConnection.monitor.close()
self.mgrConnection.socket.close()
if self.pullSock is not None:
self.dispatcher.fd_unregister(self.pullSock.socket)
self.dispatcher.fd_unregister(self.pullSock.monitor)
self.pullSock.socket.disable_monitor()
self.pullSock.monitor.close()
self.pullSock.socket.close()
if self.pushSock is not None:
self.dispatcher.fd_unregister(self.pushSock.monitor)
self.pushSock.socket.disable_monitor()
self.pushSock.monitor.close()
self.pushSock.socket.close()
self.disconnected = True
def connectionDisconnectCb(self, msg):
"""TODO: confusing comment here. Need clarification.
The connection has been detected disconnected , register it again
We have reconenct, we have to assure the regiter message is received
by the HAL
:param msg:
:return:
"""
if self.disconnected:
self.logger.info("A previous event has been processed, skip it!")
return
self.logger.info("Detected disconnected, register again")
# clean up the push and pull socket
# self.poller.unregister(self.pullSock.socket)
self.dispatcher.fd_unregister(self.mgrConnection.socket)
self.dispatcher.fd_unregister(self.mgrConnection.monitor)
self.mgrConnection.monitor.close()
self.mgrConnection.close()
# re-register the message
self.connectionSetup()
self.register(self.drvID)
# The zmq lower part will handle the reconnect
self.disconnected = True
def recvHelloRspMsgCb(self, hello):
"""Call back for Hello Message.
:param hello:
:return:
"""
self.logger.debug("Recv a hello message")
def recvCfgMsgCb(self, cfg):
"""Receive a configuration message from the Hal, processing it.
:param cfg:
:return:
"""
try:
handler = self.HalConfigMsgHandlers[cfg.msg.CfgMsgType]
handler(cfg)
except Exception as e:
self.logger.error("Got an error:%s, the cfg msg:%s", str(e),
cfg.msg)
def ptp_status_get(self, cfg):
cfg.msg.CfgMsgPayload = self.SYNC
self.sendCfgRspMsg(cfg)
def config_rdti(self, cfg):
rdti_config_data = t_RcpMessage()
rdti_config_data.ParseFromString(cfg.msg.CfgMsgPayload)
rdti_config_data.RcpDataResult = t_RcpMessage.RCP_RESULT_OK
cfg.msg.CfgMsgPayload = rdti_config_data.SerializeToString()
self.logger.debug("Recv ptp configuration message, %s" %
rdti_config_data)
self.sendCfgRspMsg(cfg)
def sendCfgRspMsg(self, cfg, rsp=None):
"""The configuration response routine, the driver implementor should
fill sth into this function.
:param cfg: The original configuration message
:return:
"""
cfgMsg = cfg.msg
rsp = {"Status": HalCommon_pb2.SUCCESS, "ErrorDescription": ""}
msg = HalMessage("HalConfigRsp",
SrcClientID=cfgMsg.SrcClientID,
SeqNum=cfgMsg.SeqNum,
Rsp=rsp,
CfgMsgType=cfgMsg.CfgMsgType,
CfgMsgPayload=cfgMsg.CfgMsgPayload)
self.pushSock.send(msg.Serialize())
