def find_host(self, mac_addr):
hosts = ryu_api.get_all_host(self)
for host in hosts:
if host.mac == mac_addr:
return host
return None
def obtain_topology(self, ev):
self.switches = get_all_switch(self.app)
self.links = get_all_link(self.app)
self.hosts = get_all_host(self.app)
# handle switches
for switch in self.switches:
#print "[INFO]", switch
dpid = switch.dp.id
self.switch_dict[dpid] = switch.dp
self.switch_dp2ports_table.setdefault(dpid, set())
for port in switch.ports:
self.switch_dp2ports_table[dpid].add(port)
# handle links
for link in self.links:
#print "[INFO]", link
src_port = link.src
dst_port = link.dst
self.link_dp2port_table[(src_port.dpid,
dst_port.dpid)] = (src_port, dst_port)
# handle hosts
for host in self.hosts:
#print "[INFO]", host
host_ip = host.ipv4
host_mac = host.mac
host_port = host.port
if len(host_ip) == 0:
pass
else:
self.host_ip2mac_table[host_ip[0]] = host_mac
self.host_ip2port_table[host_ip[0]] = host_port
self.process_topo_graph_and_paths()
def get_nexthop_host(self, ip):
hosts = topo_api.get_all_host(self)
for host in hosts:
if ip in host.ipv4:
return host
return None
def get_host(self, ip):
hosts = topo_api.get_all_host(self)
for host in hosts:
if ip in host.ipv4:
return host
return None
def switch_leave_handler(self, ev):
hostList = api.get_all_host(self)
self.hosts = [host.mac for host in hostList]
self.hostLinks = [(host.mac, host.port.dpid, {
'port': host.port.port_no,
'bytes': 0
}) for host in hostList]
self.get_topology_data(ev)
def _packet_in_handler(self, ev):
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
in_port = msg.match['in_port']
pkt_in = packet.Packet(msg.data)
eth_in = pkt_in.get_protocol(ethernet.ethernet)
arp_in = pkt_in.get_protocol(arp.arp)
# if eth.ethertype != ether_types.ETH_TYPE_ARP:
# return
# gestiamo solo i pacchetti ARP REQUEST
if arp_in is None:
return
assert arp_in.opcode == arp.ARP_REQUEST
destination_host_mac = None
host_list = get_all_host(self)
for host in host_list:
if arp_in.dst_ip in host.ipv4:
destination_host_mac = host.mac
break
# host non trovato
if destination_host_mac is None:
return
pkt_out = packet.Packet()
eth_out = ethernet.ethernet(dst=eth_in.src,
src=destination_host_mac,
ethertype=ether_types.ETH_TYPE_ARP)
arp_out = arp.arp(opcode=arp.ARP_REPLY,
src_mac=destination_host_mac,
src_ip=arp_in.dst_ip,
dst_mac=arp_in.src_mac,
dst_ip=arp_in.src_ip)
pkt_out.add_protocol(eth_out)
pkt_out.add_protocol(arp_out)
pkt_out.serialize()
actions = [parser.OFPActionOutput(in_port)]
out = parser.OFPPacketOut(datapath=datapath,
buffer_id=ofproto.OFP_NO_BUFFER,
in_port=ofproto.OFPP_CONTROLLER,
actions=actions,
data=pkt_out.data)
datapath.send_msg(out)
def get_topology_data(self):
"""Get Topology Data
"""
switch_list = get_all_switch(self)
switches = [switch.to_dict() for switch in switch_list]
links_list = get_all_link(self)
links = [link.to_dict() for link in links_list]
host_list = get_all_host(self)
hosts = [h.to_dict() for h in host_list]
return {"switches": switches, "links": links, "hosts": hosts}
def _get_topology(self):
while True:
self.logger.info('\n')
hosts = get_all_host(self)
switch_list = get_all_switch(self)
links_list = get_all_link(self)
switches =[switch.dp.id for switch in switch_list]
self.net.add_nodes_from(switches)
links=[(link.src.dpid,link.dst.dpid,{'port':link.src.port_no}) for link in links_list]
self.net.add_edges_from(links)
hub.sleep(2)
def create_ip_mac_dict(self, ev):
# Wait for one second for IP address to get updated
time.sleep(1)
hosts = api.get_all_host(self)
if len(self.ip_to_mac) == hosts:
return
else:
for f in hosts:
if f.ipv4[0]: self.ip_to_mac[f.ipv4[0]] = f.mac
print self.ip_to_mac
def create_ip_mac_dict(self, ev):
# Wait for one second for IP address to get updated
time.sleep(1)
hosts = api.get_all_host(self)
if len(self.ip_to_mac) == hosts:
return
else:
for f in hosts:
if f.ipv4[0]: self.ip_to_mac[f.ipv4[0]]=f.mac
print self.ip_to_mac
def packet_in_handler(self, ev):
msg = ev.msg
dp = msg.datapath
dpid = dp.id
ofproto = dp.ofproto
pkt = packet.Packet(msg.data)
tcp_header = pkt.get_protocol(tcp.tcp)
if tcp_header is None or (tcp_header.src_port is not 179 and
tcp_header.dst_port is not 179):
# ignore non-BGP packet
return
ipv4_header = pkt.get_protocol(ipv4.ipv4)
src_ip = ipv4_header.src
dst_ip = ipv4_header.dst
self.logger.info("BGP from %s to %s", src_ip, dst_ip)
# create a path from src to dst
hosts = topo_api.get_all_host(self)
src_host = None
dst_host = None
for host in hosts:
if src_ip in host.ipv4:
src_host = host
elif dst_ip in host.ipv4:
dst_host = host
if src_host is None or dst_host is None:
# can't find src or dst, drop it
return
src_port = src_host.port
dst_port = dst_host.port
dst_mac = dst_host.mac
to_dst_match = dp.ofproto_parser.OFPMatch(eth_dst=dst_mac,
ipv4_dst=dst_ip,
eth_type=2048)
port_no = self.fwd.setup_shortest_path(src_port.dpid,
dst_port.dpid,
dst_port.port_no,
to_dst_match)
if port_no is None:
# Can't find path to destination, ignore it.
return
self.packet_out(dp, msg, port_no)
def _monitor(self):
while True:
# print("size of dp "+str(len(self.datapaths)))
# for dp in self.datapaths.values():
# #self._request_stats(dp)
# self.send_flow_stats_request(dp,0,0)
self.print_topo()
self.logger.info(self.hosts.keys())
if len(self.all_switches.dps) > 0:
hosts = get_all_host(self.topology_api_app)
for host in hosts:
self.add_host(host.to_dict())
hub.sleep(10)
def bgp_packet_in_handler(self, ev):
msg = ev.msg
dp = msg.datapath
dpid = dp.id
ofproto = dp.ofproto
pkt = packet.Packet(msg.data)
tcp_header = pkt.get_protocol(tcp.tcp)
#只处理BGP数据包，tcp端口为179
if tcp_header is None or (tcp_header.src_port is not 179
and tcp_header.dst_port is not 179):
return
ipv4_header = pkt.get_protocol(ipv4.ipv4)
src_ip = ipv4_header.src
dst_ip = ipv4_header.dst
self.logger.info("BGP from %s to %s", src_ip, dst_ip)
# 获取源、目的主机信息
hosts = topo_api.get_all_host(self)
src_host = None
dst_host = None
for host in hosts:
if src_ip in host.ipv4:
src_host = host
elif dst_ip in host.ipv4:
dst_host = host
if src_host is None or dst_host is None:
return
# 建立BGPSpeaker间的数据路径
src_port = src_host.port
dst_port = dst_host.port
dst_mac = dst_host.mac
to_dst_match = dp.ofproto_parser.OFPMatch(eth_dst=dst_mac,
ipv4_dst=dst_ip,
eth_type=2048)
pre_actions = [dp.ofproto_parser.OFPActionSetField(eth_dst=dst_mac)]
port_no = self.fwd_util.setup_shortest_path(src_port.dpid,
dst_port.dpid,
dst_port.port_no,
to_dst_match, pre_actions)
# 将首个数据包直接递交给目的主机，防止首包丢失
if port_no is None:
return
self.fwd_util.packet_out(dp, msg, port_no)
def get_topology_data(self, ev=None):
try:
switch_list = get_switch(self, None)
host_list = get_all_host(self)
#print([h.mac for h in host_list])
self.num_hosts = len(host_list)
self.switches = [switch.dp for switch in switch_list]
self.N = len(self.switches)
self.num_nodes = self.N + self.num_hosts
switches=[switch.dp.id for switch in switch_list]
self.switches.insert(0, None)
self.estimated_traffic = np.zeros((self.N + 1, self.N + 1))
self.real_traffic = np.zeros((self.N + 1, self.N + 1))
self.estimated_packet_count = np.zeros((self.N + 1, self.N + 1), dtype=np.int)
self.real_packet_count = np.zeros((self.N + 1, self.N + 1), dtype=np.int)
self.last_measured = np.zeros((self.N + 1, self.N + 1), dtype=np.int)
n = int(self.ratio * self.N)
n = 1 if n == 0 else n
self.n = n
link_list = get_link(self, None)
self.link_list = link_list
links=[(link.src.dpid,link.dst.dpid,{'port':link.src.port_no}) for link in link_list]
self.net.add_nodes_from(switches)
self.net.add_edges_from(links)
self.switch_ports = {}
self.switch_links = np.zeros((self.N + 1, self.N + 1), dtype=np.int)
for link in link_list:
if link.src.dpid in self.switch_ports:
self.switch_ports[link.src.dpid][link.src.port_no] = link.dst.dpid
self.switch_links[link.src.dpid, link.dst.dpid] = 1
else:
self.switch_ports[link.src.dpid] = {link.src.port_no: link.dst.dpid}
self.switch_links[link.src.dpid, link.dst.dpid] = 1
if link.dst.dpid in self.switch_ports:
self.switch_ports[link.dst.dpid][link.dst.port_no] = link.src.dpid
self.switch_links[link.dst.dpid, link.src.dpid] = 1
else:
self.switch_ports[link.dst.dpid] = {link.dst.port_no: link.src.dpid}
self.switch_links[link.dst.dpid, link.src.dpid] = 1
except:
print(traceback.print_exc())
def get_topology_data(self, ev):
switch_list = get_switch(self.topology_api_app, None)
host=get_all_host(self.topology_api_app)
switches = [switch.dp.id for switch in switch_list]
self.net.add_nodes_from(switches)
links_list = get_link(self.topology_api_app, None)
# print links_list
links = [(link.src.dpid, link.dst.dpid, {'port': link.src.port_no, 'weight': 1}) for link in links_list]
# add_edges src to dst
self.net.add_edges_from(links)
links = [(link.dst.dpid, link.src.dpid, {'port': link.dst.port_no, 'weight': 1}) for link in links_list]
# add_edges dst to src
self.net.add_edges_from(links)
print "**********List of links"
print self.net.edges()
def get_topology_data(self):
"""Get Topology Data
"""
switch_list = get_all_switch(self.app)
switches = [switch.to_dict() for switch in switch_list]
links_list = get_all_link(self.app)
links = [link.to_dict() for link in links_list]
host_list = get_all_host(self.app)
# To remove hosts that are not removed by controller
ports = []
for switch in switch_list:
ports += switch.ports
port_macs = [p.hw_addr for p in ports]
n_host_list = [h for h in host_list if h.port.hw_addr in port_macs]
hosts = [h.to_dict() for h in n_host_list]
return {"switches": switches, "links": links, "hosts": hosts}
def _get_topology(self):
while True:
self.logger.info('\n\n\n')
hosts = get_all_host(self)
switches = get_all_switch(self)
links = get_all_link(self)
self.logger.info('hosts:')
for hosts in hosts:
self.logger.info(hosts.to_dict())
self.logger.info('switches:')
for switch in switches:
self.logger.info(switch.to_dict())
self.logger.info('links:')
for link in links:
self.logger.info(link.to_dict())
hub.sleep(2)
def get_topology(self, ev):
"""
Get topology info.
"""
# print('----------------')
# print('get_topology')
neighbors = {}
port_no_to_neighbor_id = {}
switch_list = get_all_switch(self.topology_api_app)
for sw in switch_list:
#print (sw.dp.id) #int
neighbors[sw.dp.id] = set()
port_no_to_neighbor_id[sw.dp.id] = {}
links = get_all_link(self.topology_api_app)
for link in links:
# print(link)
# print(link.src.port_no, link.dst.dpid)#int int
neighbors[link.src.dpid].add(link.dst.dpid)
port_no_to_neighbor_id[link.src.dpid][link.src.port_no] = link.dst.dpid
#print(neighbors)
self.neighbors = neighbors
self.port_no_to_neighbor_id = port_no_to_neighbor_id
#print(self.neighbors)
hosts = get_all_host(self.topology_api_app)
# print(type(hosts))
for host in hosts:
# print('host')
# print(host.mac, type(host.mac))#str
# print(host.port.dpid, type(host.port.dpid))#int
if host.ipv4:
self.host2switch[host.ipv4[0]] = host.port.dpid
# XXX 上面如果host有ipv4地址，则按第一个ipv4地址录入其连接的交换机，否则按ipv6地址，都没有就不录入(ip存的是点分十进制字符串)
elif host.ipv6:
self.host2switch[host.ipv6[0]] = host.port.dpid
else:
pass
def _packet_in_handler(self, ev):
# If you hit this you might want to increase
# the "miss_send_length" of your switch
if ev.msg.msg_len < ev.msg.total_len:
self.logger.debug("packet truncated: only %s of %s bytes",
ev.msg.msg_len, ev.msg.total_len)
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
if eth.ethertype == ether_types.ETH_TYPE_LLDP:
# ignore lldp packet
return
dst = eth.dst
src = eth.src
dpid = datapath.id
# Figure out environment
links = api.get_all_link(self)
switches = api.get_all_switch(self)
hosts = api.get_all_host(self)
arp_pkt = None
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
if arp_pkt.opcode == arp.ARP_REQUEST:
# Send to ARP proxy. Cannot perform NIx routing until both hosts
# are known by the controller
self.ArpProxy(msg.data, datapath, in_port, links, switches,
hosts)
return
elif arp_pkt.opcode == arp.ARP_REPLY:
self.ArpReply(msg.data, datapath, arp_pkt.dst_ip, links,
switches, hosts)
return
self.logger.info("%s: packet in %s %s %s %s", time.time(), dpid, src,
dst, in_port)
# Start nix vector code
numNodes = len(switches) + len(hosts)
src_ip = ''
dst_ip = ''
srcNode = ''
dstNode = ''
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
src_ip = arp_pkt.src_ip
dst_ip = arp_pkt.dst_ip
elif eth.ethertype == ether_types.ETH_TYPE_IP:
ipv4_pkt = pkt.get_protocols(ipv4.ipv4)[0]
src_ip = ipv4_pkt.src
dst_ip = ipv4_pkt.dst
for host in hosts:
if src_ip == host.ipv4[0]:
srcNode = host
if dst_ip == host.ipv4[0]:
dstNode = host
srcSwitch = [
switch for switch in switches if switch.dp.id == srcNode.port.dpid
][0]
dstSwitch = [
switch for switch in switches if switch.dp.id == dstNode.port.dpid
][0]
parentVec = {}
foundIt = self.BFS(numNodes, srcSwitch, dstSwitch, links, switches,
hosts, parentVec)
sdnNix = []
nixVector = []
if foundIt:
self.BuildNixVector(parentVec, srcSwitch, dstSwitch, links,
switches, hosts, nixVector, sdnNix)
# Need to send to last switch to send out host port
sdnNix.insert(0, (dstSwitch, dstNode.port.port_no))
for curNix in sdnNix:
self.sendNixRules(srcSwitch, curNix[0], curNix[1], msg)
def packet_in_handler(self, ev):
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
in_port = msg.match['in_port']
dpid = datapath.id
pkt = packet.Packet(msg.data)
eth = pkt.get_protocol(ethernet.ethernet)
arp_in = pkt.get_protocol(arp.arp)
# installo le tabelle dopo aver acquisito tutti gli host
global hostOk
global routing_matrix
sw = [x for x in routing_matrix if x.id == dpid]
sw_obj = sw[0]
if hostOk and not sw_obj.installed: # and non ho ancora installato la tabella su dpid
# prendendo i riferimenti dall'oggetto switch che matcha l'id compilo flow e group tables
# poi set flag di avvenuta installazione (cosi la prossima volta evito di reinstallare)
self.group_mod(datapath, sw_obj.port_cw, sw_obj.port_ccw)
self.flow_mod(datapath, sw_obj)
# set flag di installazione avvenuta
idx = 0
for s in routing_matrix:
if s.id == sw_obj.id:
routing_matrix[idx].installed = 1
break
idx += 1
print("\n---------------------")
print("Tables installed on switch", dpid)
print("---------------------\n")
# gestione centralizzata arp
if arp_in is not None:
assert arp_in.opcode == arp.ARP_REQUEST
print("\n---------------------")
print("ARP packet from DP id-> ", dpid, "SRC mac->", eth.src)
print("---------------------\n")
destination_host_mac = None
host_list = get_all_host(self)
for host in host_list:
if arp_in.dst_ip in host.ipv4:
destination_host_mac = host.mac
break
# aggiungo host a routing matrix
global i
# if i < len(routing_matrix):
if i < 3:
for host in host_list:
for sw in routing_matrix:
if host.port.dpid == sw.id and sw.host_mac is "":
sw.host_mac = host.mac
sw.host_port = int(host.port.name[-1])
i += 1
# elif not hostOk and i == len(routing_matrix):
elif not hostOk and i == 3:
hostOk = True
print("\n---------------------")
print("Discover all hosts")
printMat(routing_matrix)
print("---------------------\n")
# host non trovato
if destination_host_mac is None:
return
pkt_out = packet.Packet()
eth_out = ethernet.ethernet(dst=eth.src,
src=destination_host_mac,
ethertype=ether_types.ETH_TYPE_ARP)
arp_out = arp.arp(opcode=arp.ARP_REPLY,
src_mac=destination_host_mac,
src_ip=arp_in.dst_ip,
dst_mac=arp_in.src_mac,
dst_ip=arp_in.src_ip)
pkt_out.add_protocol(eth_out)
pkt_out.add_protocol(arp_out)
pkt_out.serialize()
actions = [parser.OFPActionOutput(in_port)]
out = parser.OFPPacketOut(datapath=datapath,
buffer_id=ofproto.OFP_NO_BUFFER,
in_port=ofproto.OFPP_CONTROLLER,
actions=actions,
data=pkt_out.data)
datapath.send_msg(out)
else:
return
def create_routing_matrix(self):
switch_list = get_switch(self, None)
host_list = get_all_host(self)
nH = len(host_list) # The number of hosts
nS = len(switch_list) # The number of switches
N = nH + nS # The number of nodes
switches=[switch.dp.id for switch in switch_list]
print(switches)
print([host.dp.id for host in host_list])
links=[str(link.src.dpid) + "->" + str(link.dst.dpid) for link in get_link(self, None)]
print("host list: " + str(host_list))
print("host switches: " + str([host.port.dpid for host in host_list]))
print("nH: " + str(nH))
print("nS: " + str(nS))
print("links: " + str(links))
switches = list(range(nS)) # The list of switch ids
hosts = list(range(nS, N)) # The list of host ids
self.net.add_nodes_from([h+1 for h in hosts])
for i,host in enumerate(host_list):
print("adding edge between " + str(host.port.dpid) + " and " + str(nS+i+1))
self.net.add_edge(host.port.dpid,nS+i+1)
edges = self.net.edges()
nL = len(edges)
L = 2*nL # The number of directed links
print("L: " + str(L))
# Populate the dictionaries
links = {(k-1): list(v.values()) for k,v in self.get_switch_to_link_mapping().items()}
for i,host in enumerate(host_list):
links[host.port.dpid-1].append(self.max_link_id)
self.max_link_id += 1
lpair2id = {} # A mapping from edge pairs (src,dst) to link ids
for i,edge in enumerate(edges):
lpair2id[edge] = i
lpair2id[(edge[1], edge[0])] = nL+i
if edge[0] in links:
links[edge[0]].append(i)
links[edge[0]].append(nL+i)
if edge[1] in links:
links[edge[1]].append(i)
links[edge[1]].append(nL+i)
hpair2id = {} # A mapping from host pairs (src,dst) to the corresponding flow ids
i = 0
for src in hosts:
for dst in hosts:
if src != dst:
hpair2id[(src,dst)] = i
i += 1
H2=i # The number of flows
print("Edges----")
print(edges)
# Create the routing matrix by using the shortest path algorithm
A = np.zeros((L,H2))
for src in hosts:
for dst in hosts:
if src != dst:
try:
path = nx.shortest_path(self.net, src+1, dst+1)
for k in range(len(path)-1):
A[lpair2id[(path[k],path[k+1])],hpair2id[(src,dst)]] = 1
except:
continue
self.A = A
self.Inference = InferenceModule(A=A, links=links)
return A
def _topology_thread(self):
while True:
all_switch = get_all_switch(self)
Set_all_switch(all_switch)
all_link = get_all_link(self)
Set_all_link(all_link)
all_host = get_all_host(self)
Set_all_host(all_host)
print 'all_switch = '
print len(Get_all_switch())
print 'all_link = '
print len(Get_all_link())
print 'all_host = '
print len(Get_all_host())
for a in Get_all_host():
print a.ipv4
hub.sleep(1)
if len(Get_all_switch()) == 15 and len(Get_all_host()) == 16:
c = 0
for i in range(0, len(Get_all_switch())):
get_TopoNumberTo().append(['switch', Get_all_switch()[i]])
for i in range(0, len(Get_all_host())):
get_TopoNumberTo().append(['host', Get_all_host()[i]])
for x in range(0, len(get_TopoNumberTo())):
print(x, ':', str(get_TopoNumberTo()[x]))
weight = []
for i in range(0, len(get_TopoNumberTo())):
weight.append([999999999] * len(get_TopoNumberTo()))
for i in range(0, len(weight)):
for j in range(0, len(weight[i])):
if i == j:
weight[i][j] = 0
for link in Get_all_link():
indexA = 0
indexB = 0
for i in get_TopoNumberTo():
if i[0] == 'switch' and i[1].dp.id == link.src.dpid:
indexA = get_TopoNumberTo().index(i)
if i[0] == 'switch' and i[1].dp.id == link.dst.dpid:
indexB = get_TopoNumberTo().index(i)
weight[indexA][indexB] = 1
weight[indexB][indexA] = 1
for host in Get_all_host():
indexA = 0
indexB = 0
for i in get_TopoNumberTo():
if i[0] == 'host' and i[1] == host:
indexA = get_TopoNumberTo().index(i)
if i[0] == 'switch' and i[1].dp.id == host.port.dpid:
indexB = get_TopoNumberTo().index(i)
weight[indexA][indexB] = 1
weight[indexB][indexA] = 1
print 'weight = '
print weight
#forwarding matrix to forwarding Table
forwardingMatrix, distance = MakeForwardingTable(weight)
print forwardingMatrix
for i in range(0, len(get_TopoNumberTo())):
if get_TopoNumberTo()[i][0] == 'switch':
switchdp = get_TopoNumberTo()[i][1].dp.id
get_forwardingTable()[switchdp] = {}
for j in range(0, len(forwardingMatrix[i])):
if get_TopoNumberTo()[j][0] == 'host':
dsthost = get_TopoNumberTo()[j][1].mac
Pport = -1
if get_TopoNumberTo()[forwardingMatrix[i]
[j]][0] == 'switch':
for link in Get_all_link():
if link.src.dpid == switchdp and link.dst.dpid == get_TopoNumberTo(
)[forwardingMatrix[i][j]][1].dp.id:
Pport = link.src.port_no
if get_TopoNumberTo()[forwardingMatrix[i]
[j]][0] == 'host':
Pport = get_TopoNumberTo(
)[j][1].port.port_no
if Pport == -1:
print 'host not found'
return
else:
get_forwardingTable(
)[switchdp][dsthost] = Pport
print 'get_forwardingTable() = '
print get_forwardingTable()
for i in range(0, len(distance)):
if get_TopoNumberTo()[i][0] == 'host':
get_distanceTable()[get_TopoNumberTo()[i][1].mac] = {}
for j in range(0, len(distance[i])):
if get_TopoNumberTo()[j][0] == 'host':
get_distanceTable()[get_TopoNumberTo(
)[i][1].mac][get_TopoNumberTo()[j]
[1].mac] = distance[i][j]
print 'get_distanceTable() = '
print get_distanceTable()
Set_ready(True)
break
def _packet_in_handler(self, ev):
# If you hit this you might want to increase
# the "miss_send_length" of your switch
if ev.msg.msg_len < ev.msg.total_len:
self.logger.debug("packet truncated: only %s of %s bytes",
ev.msg.msg_len, ev.msg.total_len)
msg = ev.msg
datapath = msg.datapath
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
if eth.ethertype == ether_types.ETH_TYPE_LLDP:
# ignore lldp packet
return
pr, start = self.enableProf()
# After the first packet in, start allowing FW to monitor link delays
#if self.first_packet == 1:
# self.threads.append(hub.spawn_after(5, self.repromptFW))
# self.first_packet = 0
# Figure out environment
links = api.get_all_link(self)
switches = api.get_all_switch(self)
hosts = api.get_all_host(self)
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
if arp_pkt.opcode == arp.ARP_REQUEST:
# Send to ARP proxy. Cannot perform NIx routing until both hosts
# are known by the controller
self.ArpProxy(msg.data, datapath, in_port, links, switches,
hosts)
elif arp_pkt.opcode == arp.ARP_REPLY:
self.ArpReply(msg.data, datapath, arp_pkt.dst_ip, links,
switches, hosts)
self.disableProf(pr, start, "ARP")
return
#self.logger.info("%s: packet in %s %s %s %s", time.time(), datapath.id, eth.src, eth.dst, in_port)
# Start nix vector code
src_ip = ''
dst_ip = ''
srcNode = None
dstNode = None
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
src_ip = arp_pkt.src_ip
dst_ip = arp_pkt.dst_ip
elif eth.ethertype == ether_types.ETH_TYPE_IP:
ipv4_pkt = pkt.get_protocols(ipv4.ipv4)[0]
src_ip = ipv4_pkt.src
dst_ip = ipv4_pkt.dst
for host in hosts:
if src_ip == host.ipv4[0]:
srcNode = host
if dst_ip == host.ipv4[0]:
dstNode = host
if srcNode is None or dstNode is None:
self.ArpProxy(msg.data, datapath, in_port, links, switches, hosts)
self.disableProf(pr, start, "UNKDST")
return
srcSwitch = [
switch for switch in switches if switch.dp.id == srcNode.port.dpid
][0]
dstSwitch = [
switch for switch in switches if switch.dp.id == dstNode.port.dpid
][0]
#alg_pr,alg_start = self.enableProf()
next_array = self.FloydWarshall(switches, links)
#self.disableProf(alg_pr,alg_start,"ALGORITHM")
# Send reverse path first to limit requests to controller
#rvs_pr,rvs_start = self.enableProf()
sdnNix = []
self.BuildNixVector(dstSwitch, srcSwitch, switches, links, next_array,
sdnNix)
# Need to send to last switch to send out host port
sdnNix.append((srcSwitch, srcNode.port.port_no))
#self.disableProf(rvs_pr,rvs_start,"RVS_PATH")
for curNix in reversed(sdnNix):
self.sendNixRules(dstSwitch, curNix[0], curNix[1], eth.dst,
eth.src, msg, False)
#fwd_pr,fwd_start = self.enableProf()
sdnNix = []
self.BuildNixVector(srcSwitch, dstSwitch, switches, links, next_array,
sdnNix)
# Need to send to last switch to send out host port
sdnNix.append((dstSwitch, dstNode.port.port_no))
#self.disableProf(fwd_pr,fwd_start,"FWD_PATH")
for curNix in reversed(sdnNix):
self.sendNixRules(srcSwitch, curNix[0], curNix[1], eth.src,
eth.dst, msg)
self.disableProf(pr, start, "COMPLETION")
def _packet_in_handler(self, ev):
# If you hit this you might want to increase
# the "miss_send_length" of your switch
if ev.msg.msg_len < ev.msg.total_len:
self.logger.debug("packet truncated: only %s of %s bytes",
ev.msg.msg_len, ev.msg.total_len)
msg = ev.msg
datapath = msg.datapath
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
if eth.ethertype == ether_types.ETH_TYPE_LLDP:
# ignore lldp packet
return
pr, start = self.enableProf()
# Figure out environment
links = api.get_all_link(self)
switches = api.get_all_switch(self)
hosts = api.get_all_host(self)
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
if arp_pkt.opcode == arp.ARP_REQUEST:
# Send to ARP proxy. Cannot perform NIx routing until both hosts
# are known by the controller
self.ArpProxy(msg.data, datapath, in_port, links, switches,
hosts)
elif arp_pkt.opcode == arp.ARP_REPLY:
self.ArpReply(msg.data, datapath, arp_pkt.dst_ip, links,
switches, hosts)
self.disableProf(pr, start, "ARP")
return
#self.logger.info("%s: packet in %s %s %s %s", time.time(), dpid, src, dst, in_port)
# Start nix vector code
src_ip = ''
dst_ip = ''
srcNode = None
dstNode = None
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
src_ip = arp_pkt.src_ip
dst_ip = arp_pkt.dst_ip
elif eth.ethertype == ether_types.ETH_TYPE_IP:
ipv4_pkt = pkt.get_protocols(ipv4.ipv4)[0]
src_ip = ipv4_pkt.src
dst_ip = ipv4_pkt.dst
for host in hosts:
if src_ip == host.ipv4[0]:
srcNode = host
if dst_ip == host.ipv4[0]:
dstNode = host
if srcNode is None or dstNode is None:
self.ArpProxy(msg.data, datapath, in_port, links, switches, hosts)
self.disableProf(pr, start, "UNKDST")
return
srcSwitch = [
switch for switch in switches if switch.dp.id == srcNode.port.dpid
][0]
dstSwitch = [
switch for switch in switches if switch.dp.id == dstNode.port.dpid
][0]
# Send reverse path first
#alg_pr,alg_start = self.enableProf()
parentVec = {}
foundIt = self.UCS(dstSwitch, srcSwitch, links, switches, parentVec)
#self.disableProf(alg_pr,alg_start,"RVS_ALG")
#rvs_pr,rvs_start = self.enableProf()
sdnNix = []
nixVector = []
if foundIt:
self.BuildNixVector(parentVec, dstSwitch, srcSwitch, links,
switches, hosts, nixVector, sdnNix)
# Need to send to last switch to send out host port
sdnNix.insert(0, (srcSwitch, srcNode.port.port_no))
#self.disableProf(rvs_pr,rvs_start,"RVS_PATH")
for curNix in sdnNix:
self.sendNixRules(dstSwitch, curNix[0], curNix[1], eth.dst,
eth.src, msg, False)
#alg_pr,alg_start = self.enableProf()
parentVec = {}
foundIt = self.UCS(srcSwitch, dstSwitch, links, switches, parentVec)
#self.disableProf(alg_pr,alg_start,"FWD_ALG")
#fwd_pr,fwd_start = self.enableProf()
sdnNix = []
nixVector = []
if foundIt:
self.BuildNixVector(parentVec, srcSwitch, dstSwitch, links,
switches, hosts, nixVector, sdnNix)
# Need to send to last switch to send out host port
sdnNix.insert(0, (dstSwitch, dstNode.port.port_no))
#self.disableProf(fwd_pr,fwd_start,"FWD_PATH")
for curNix in sdnNix:
self.sendNixRules(srcSwitch, curNix[0], curNix[1], eth.src,
eth.dst, msg)
self.disableProf(pr, start, "COMPLETION")
def _update_hosts(self):
host_list = get_all_host(self)
if host_list:
self.dpids_port_to_host = self._get_dpids_port_to_host(host_list)
self.hosts = self._get_hosts(host_list)
def list_hosts(self):
hosts = topo_api.get_all_host(self)
return [host.to_dict() for host in hosts]
def _topology_thread(self):
while True:
all_switch=get_all_switch(self)
Set_all_switch(all_switch)
all_link=get_all_link(self)
Set_all_link(all_link)
all_host=get_all_host(self)
Set_all_host(all_host)
print 'all_switch = '
print len(Get_all_switch())
print 'all_link = '
print len(Get_all_link())
print 'all_host = '
print len(Get_all_host())
for a in Get_all_host():
print a.ipv4
hub.sleep(1)
if len(Get_all_switch()) == 10 and len(Get_all_host()) == 12:
c=0
for i in range(0,len(Get_all_switch())) :
get_TopoNumberTo().append(['switch',all_switch[i]])
for i in range(0,len(Get_all_host())) :
get_TopoNumberTo().append(['host',all_host[i]])
for x in get_TopoNumberTo():
print (x,':',str(x))
weight=[]
for i in range(0,len(get_TopoNumberTo())):
weight.append([999999999]*len(get_TopoNumberTo()))
for i in range(0,len(weight)):
for j in range(0,len(weight[i])):
if i == j :
weight[i][j]=0
for link in Get_all_link():
indexA=0
indexB=0
for i in get_TopoNumberTo():
if i[0] == 'switch' and i[1].dp.id == link.src.dpid :
indexA = get_TopoNumberTo().index(i)
if i[0] == 'switch' and i[1].dp.id == link.dst.dpid :
indexB = get_TopoNumberTo().index(i)
weight[indexA][indexB]=1
weight[indexB][indexA]=1
for host in Get_all_host():
indexA=0
indexB=0
for i in get_TopoNumberTo():
if i[0] == 'host' and i[1] == host :
indexA = get_TopoNumberTo().index(i)
if i[0] == 'switch' and i[1].dp.id == host.port.dpid :
indexB = get_TopoNumberTo().index(i)
weight[indexA][indexB]=1
weight[indexB][indexA]=1
print weight
# forwarding matrix to forwarding Table
forwardingMatrix,distance = MakeForwardingTable(weight)
print forwardingMatrix
for i in range(0,len(get_TopoNumberTo())):
if get_TopoNumberTo()[i][0] == 'switch':
switchdp=get_TopoNumberTo()[i][1].dp.id
get_forwardingTable()[switchdp]={}
for j in range(0,len(forwardingMatrix[i])):
if get_TopoNumberTo()[j][0] == 'host' :
dsthost=get_TopoNumberTo()[j][1].mac
Pport=-1
if get_TopoNumberTo()[forwardingMatrix[i][j]][0] == 'switch':
for link in Get_all_link():
if link.src.dpid == switchdp and link.dst.dpid == get_TopoNumberTo()[forwardingMatrix[i][j]][1].dp.id :
Pport=link.src.port_no
if get_TopoNumberTo()[forwardingMatrix[i][j]][0] == 'host':
Pport=get_TopoNumberTo()[j][1].port.port_no
if Pport==-1:
print 'host not found'
return
else :
get_forwardingTable()[switchdp][dsthost] = Pport
print get_forwardingTable()
for i in range(0,len(distance)):
if get_TopoNumberTo()[i][0] == 'host':
get_distanceTable()[get_TopoNumberTo()[i][1].mac]={}
for j in range(0,len(distance[i])):
if get_TopoNumberTo()[j][0] == 'host':
get_distanceTable()[get_TopoNumberTo()[i][1].mac][get_TopoNumberTo()[j][1].mac]=distance[i][j]
print get_distanceTable()
# arpMatrix to ArpTable
check=[0]*len(get_TopoNumberTo())
check[0]=1
arpMatrix=[]
for i in range(0,len(get_TopoNumberTo())):
arpMatrix.append([0]*len(get_TopoNumberTo()))
SPTqueue=[]
SPTqueue.append(0)
while len(SPTqueue) != 0:
i=SPTqueue.pop(0)
for j in range(0,len(get_TopoNumberTo())):
if weight[i][j]==1 and check[j] == 0:
arpMatrix[i][j]=1
arpMatrix[j][i]=1
check[j]=1
SPTqueue.append(j)
print "get_TopoNumberTo() = "
for i in get_TopoNumberTo():
print 'get_TopoNumberTo()['+str(i)+'] = '+str(get_TopoNumberTo()[0])
print "arpMatrix = "
print arpMatrix
for i in range(0,len(get_TopoNumberTo())):
if get_TopoNumberTo()[i][0] == 'switch':
switchdp=get_TopoNumberTo()[i][1].dp.id
Get_ArpTable()[switchdp]=[]
for j in range(0,len(arpMatrix[i])):
if arpMatrix[i][j] == 1 :
Pport=-1
if get_TopoNumberTo()[j][0] == 'switch':
for link in Get_all_link():
if link.src.dpid == switchdp and link.dst.dpid == get_TopoNumberTo()[j][1].dp.id :
Pport=link.src.port_no
if get_TopoNumberTo()[j][0] == 'host':
Pport=get_TopoNumberTo()[j][1].port.port_no
if Pport==-1:
print 'Pport not found'
return
else :
Get_ArpTable()[switchdp].append(Pport)
print "ARP Table = "
print Get_ArpTable()
Set_ready(True)
break
def _topology_thread(self):
while True:
self.all_switch = get_all_switch(self)
self.all_link = get_all_link(self)
self.all_host = get_all_host(self)
print 'self.all_switch = '
print len(self.all_switch)
print 'self.all_link = '
print len(self.all_link)
print 'self.all_host = '
print len(self.all_host)
for a in self.all_host:
print a.ipv4
hub.sleep(3)
if len(self.all_switch) == 6 and len(self.all_host) == 6:
c = 0
for i in range(0, len(self.all_switch)):
self.TopoNumberTo.append(['switch', self.all_switch[i]])
for i in range(0, len(self.all_host)):
self.TopoNumberTo.append(['host', self.all_host[i]])
for x in self.TopoNumberTo:
print(x, ':', str(x))
weight = []
for i in range(0, len(self.TopoNumberTo)):
weight.append([999999999] * len(self.TopoNumberTo))
for i in range(0, len(weight)):
for j in range(0, len(weight[i])):
if i == j:
weight[i][j] = 0
for link in self.all_link:
indexA = 0
indexB = 0
for i in self.TopoNumberTo:
if i[0] == 'switch' and i[1].dp.id == link.src.dpid:
indexA = self.TopoNumberTo.index(i)
if i[0] == 'switch' and i[1].dp.id == link.dst.dpid:
indexB = self.TopoNumberTo.index(i)
weight[indexA][indexB] = 1
weight[indexB][indexA] = 1
for host in self.all_host:
indexA = 0
indexB = 0
for i in self.TopoNumberTo:
if i[0] == 'host' and i[1] == host:
indexA = self.TopoNumberTo.index(i)
if i[0] == 'switch' and i[1].dp.id == host.port.dpid:
indexB = self.TopoNumberTo.index(i)
weight[indexA][indexB] = 1
weight[indexB][indexA] = 1
print weight
#forwarding matrix to forwarding Table
forwardingMatrix = MakeForwardingTable(weight)
print forwardingMatrix
for i in range(0, len(self.TopoNumberTo)):
if self.TopoNumberTo[i][0] == 'switch':
switchdp = self.TopoNumberTo[i][1].dp.id
self.forwardingTable[switchdp] = {}
for j in range(0, len(forwardingMatrix[i])):
if self.TopoNumberTo[j][0] == 'host':
dsthost = self.TopoNumberTo[j][1].mac
Pport = -1
if self.TopoNumberTo[forwardingMatrix[i]
[j]][0] == 'switch':
for link in self.all_link:
if link.src.dpid == switchdp and link.dst.dpid == self.TopoNumberTo[
forwardingMatrix[i]
[j]][1].dp.id:
Pport = link.src.port_no
if self.TopoNumberTo[forwardingMatrix[i]
[j]][0] == 'host':
Pport = self.TopoNumberTo[j][
1].port.port_no
if Pport == -1:
print 'host not found'
return
else:
self.forwardingTable[switchdp][
dsthost] = Pport
print self.forwardingTable
#arpMatrix to ArpTable
check = [0] * len(self.TopoNumberTo)
check[0] = 1
arpMatrix = []
for i in range(0, len(self.TopoNumberTo)):
arpMatrix.append([0] * len(self.TopoNumberTo))
for i in range(0, len(self.TopoNumberTo)):
for j in range(0, len(self.TopoNumberTo)):
if weight[i][j] == 1 and check[j] == 0:
arpMatrix[i][j] = 1
arpMatrix[j][i] = 1
check[j] = 1
print arpMatrix
for i in range(0, len(self.TopoNumberTo)):
if self.TopoNumberTo[i][0] == 'switch':
switchdp = self.TopoNumberTo[i][1].dp.id
self.ArpTable[switchdp] = []
for j in range(0, len(arpMatrix[i])):
if arpMatrix[i][j] == 1:
Pport = -1
if self.TopoNumberTo[j][0] == 'switch':
for link in self.all_link:
if link.src.dpid == switchdp and link.dst.dpid == self.TopoNumberTo[
j][1].dp.id:
Pport = link.src.port_no
if self.TopoNumberTo[j][0] == 'host':
Pport = self.TopoNumberTo[j][
1].port.port_no
if Pport == -1:
print 'Pport not found'
return
else:
self.ArpTable[switchdp].append(Pport)
print self.ArpTable
break
def _topology_thread(self):
while True:
all_switch = get_all_switch(self)
Set_all_switch(all_switch)
all_link = get_all_link(self)
Set_all_link(all_link)
all_host = get_all_host(self)
Set_all_host(all_host)
self.link_bw = [[0 for row in range(len(Get_all_switch()) + 1)]
for col in range(len(Get_all_switch()) + 1)]
print 'All Switch = ' + str(len(Get_all_switch()))
print 'All Link = ' + str(len(Get_all_link()))
print 'All Host = ' + str(len(Get_all_host()))
# for a in Get_all_host():
# print a.ipv4
hub.sleep(1)
if len(Get_all_switch()) == 6:
for i in range(0, len(Get_all_switch())):
get_TopoNumberTo().append(['switch', all_switch[i]])
for i in range(0, len(Get_all_switch()) + 1):
self.switch_port_to_switch.append(
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0])
for i in range(0, len(Get_all_host())):
get_TopoNumberTo().append(['host', all_host[i]])
# print 'get_TopoNumberTo = ' + str(get_TopoNumberTo())
connectMatrix = []
for i in range(0, len(get_TopoNumberTo())):
connectMatrix.append([999999999] * len(get_TopoNumberTo()))
for i in range(0, len(connectMatrix)):
for j in range(0, len(connectMatrix[i])):
if i == j:
connectMatrix[i][j] = 0
# Find each link's src & dst
# Controller get all switch_port_to_switch
for link in Get_all_link():
print 'link = ' + str(link)
indexA = 0
indexB = 0
for i in get_TopoNumberTo():
if i[0] == 'switch' and i[1].dp.id == link.src.dpid:
indexA = get_TopoNumberTo().index(i)
if i[0] == 'switch' and i[1].dp.id == link.dst.dpid:
indexB = get_TopoNumberTo().index(i)
if link.src.port_no != 4294967294:
self.switch_port_to_switch[link.src.dpid][
link.src.port_no] = link.dst.dpid
self.switch_port_to_switch[link.dst.dpid][
link.dst.port_no] = link.src.dpid
# connectMatrix[src][dst] = 1 represent A to B is connected
connectMatrix[indexA][indexB] = 1
connectMatrix[indexB][indexA] = 1
# print 'Switch Port to Switch = \n' + \
# str(np.matrix(self.switch_port_to_switch))
# Controller get (host,switch) connection
for host in Get_all_host():
indexA = 0
indexB = 0
for i in get_TopoNumberTo():
if i[0] == 'host' and i[1] == host:
# src
indexA = get_TopoNumberTo().index(i)
# check whether there is a link exists between host and switch
if i[0] == 'switch' and i[1].dp.id == host.port.dpid:
# dst
indexB = get_TopoNumberTo().index(i)
connectMatrix[indexA][indexB] = 1
connectMatrix[indexB][indexA] = 1
print 'connectMatrix = '
print np.matrix(connectMatrix)
# forwarding matrix to forwarding Table
forwardingMatrix, distance = MakeForwardingTable(connectMatrix)
print 'forwardingMatrix :\n' + str(np.matrix(forwardingMatrix))
print 'distance : \n' + str(distance)
for i in range(0, len(get_TopoNumberTo())):
if get_TopoNumberTo()[i][0] == 'switch':
switchdp = get_TopoNumberTo()[i][1].dp.id
# Create Switch's forwardingTable : {'dpid':{}}
get_forwardingTable()[switchdp] = {}
for j in range(0, len(forwardingMatrix[i])):
if get_TopoNumberTo()[j][0] == 'host':
dsthost = get_TopoNumberTo()[j][1].mac
Pport = -1
if get_TopoNumberTo()[forwardingMatrix[i]
[j]][0] == 'switch':
for link in Get_all_link():
if link.src.dpid == switchdp and link.dst.dpid == get_TopoNumberTo(
)[forwardingMatrix[i][j]][1].dp.id:
Pport = link.src.port_no
if get_TopoNumberTo()[forwardingMatrix[i]
[j]][0] == 'host':
Pport = get_TopoNumberTo(
)[j][1].port.port_no
if Pport == -1:
print 'host not found'
return
else:
get_forwardingTable(
)[switchdp][dsthost] = Pport
print 'get_forwardingTable'
print get_forwardingTable()
for i in range(0, len(distance)):
if get_TopoNumberTo()[i][0] == 'host':
get_distanceTable()[get_TopoNumberTo()[i][1].mac] = {}
for j in range(0, len(distance[i])):
if get_TopoNumberTo()[j][0] == 'host':
get_distanceTable()[get_TopoNumberTo(
)[i][1].mac][get_TopoNumberTo()[j]
[1].mac] = distance[i][j]
print get_distanceTable()
# arpMatrix to ArpTable
check = [0] * len(get_TopoNumberTo())
check[0] = 1
arpMatrix = []
for i in range(0, len(get_TopoNumberTo())):
arpMatrix.append([0] * len(get_TopoNumberTo()))
SPTqueue = []
SPTqueue.append(0)
while len(SPTqueue) != 0:
i = SPTqueue.pop(0)
for j in range(0, len(get_TopoNumberTo())):
if connectMatrix[i][j] == 1 and check[j] == 0:
arpMatrix[i][j] = 1
arpMatrix[j][i] = 1
check[j] = 1
SPTqueue.append(j)
print "get_TopoNumberTo() = "
for i in get_TopoNumberTo():
print '[' + str(i) + '] = ' + str(get_TopoNumberTo()[0])
print "arpMatrix = "
print arpMatrix
for i in range(0, len(get_TopoNumberTo())):
if get_TopoNumberTo()[i][0] == 'switch':
switchdp = get_TopoNumberTo()[i][1].dp.id
Get_ArpTable()[switchdp] = []
for j in range(0, len(arpMatrix[i])):
if arpMatrix[i][j] == 1:
Pport = -1
if get_TopoNumberTo()[j][0] == 'switch':
for link in Get_all_link():
if link.src.dpid == switchdp and link.dst.dpid == get_TopoNumberTo(
)[j][1].dp.id:
Pport = link.src.port_no
if get_TopoNumberTo()[j][0] == 'host':
Pport = get_TopoNumberTo(
)[j][1].port.port_no
if Pport == -1:
print 'Pport not found'
return
else:
Get_ArpTable()[switchdp].append(Pport)
print "ARP Table = "
print Get_ArpTable()
Set_ready(True)
break
def list_hosts(self):
hosts = topo_api.get_all_host(self)
return [host.to_dict() for host in hosts]
def get_hosts(self):
return get_all_host(self)
def _packet_in_handler(self, ev):
# If you hit this you might want to increase
# the "miss_send_length" of your switch
if ev.msg.msg_len < ev.msg.total_len:
self.logger.debug("packet truncated: only %s of %s bytes",
ev.msg.msg_len, ev.msg.total_len)
msg = ev.msg
datapath = msg.datapath
ofproto = datapath.ofproto
parser = datapath.ofproto_parser
in_port = msg.match['in_port']
pkt = packet.Packet(msg.data)
eth = pkt.get_protocols(ethernet.ethernet)[0]
if eth.ethertype == ether_types.ETH_TYPE_LLDP:
# ignore lldp packet
return
dst = eth.dst
src = eth.src
dpid = datapath.id
# Figure out environment
links = api.get_all_link(self)
switches = api.get_all_switch(self)
hosts = api.get_all_host(self)
arp_pkt = None
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
if arp_pkt.opcode == arp.ARP_REQUEST:
# Send to ARP proxy. Cannot perform NIx routing until both hosts
# are known by the controller
self.ArpProxy (msg.data, datapath, in_port, links, switches, hosts)
return
elif arp_pkt.opcode == arp.ARP_REPLY:
self.ArpReply (msg.data, datapath, arp_pkt.dst_ip, links, switches, hosts)
return
self.logger.info("%s: packet in %s %s %s %s %s", time.time(), dpid, src, dst, in_port, eth.ethertype)
# Start nix vector code
numNodes = len(switches) + len(hosts)
src_ip = ''
dst_ip = ''
srcNode = ''
dstNode = ''
if eth.ethertype == ether_types.ETH_TYPE_ARP:
arp_pkt = pkt.get_protocols(arp.arp)[0]
src_ip = arp_pkt.src_ip
dst_ip = arp_pkt.dst_ip
elif eth.ethertype == ether_types.ETH_TYPE_IP:
ipv4_pkt = pkt.get_protocols(ipv4.ipv4)[0]
src_ip = ipv4_pkt.src
dst_ip = ipv4_pkt.dst
for host in hosts:
if src_ip == host.ipv4[0]:
srcNode = host
if dst_ip == host.ipv4[0]:
dstNode = host
srcSwitch = [switch for switch in switches if switch.dp.id == srcNode.port.dpid][0]
dstSwitch = [switch for switch in switches if switch.dp.id == dstNode.port.dpid][0]
parentVec = {}
foundIt = self.BFS (numNodes, srcSwitch, dstSwitch,
links, switches, hosts, parentVec)
sdnNix = []
nixVector = []
if foundIt:
self.BuildNixVector (parentVec, srcSwitch, dstSwitch, links, switches, hosts, nixVector, sdnNix)
sdnNix.insert(0, (dstSwitch, dstNode.port.port_no))
self.sendNixPacket (ofproto, parser, srcSwitch, sdnNix, msg)
self.modLastHop (ofproto, parser, dstSwitch, dstNode.port.port_no, msg)
