Example #1
0
 def short_frame_middle(self):
     """implimentation of above."""
     config.OPTS.consecutive_frames_to_id = 3
     temp = SampleMP3File()
     temp.add_valid_frames(10)
     junk_start = temp.get_size()
     header = temp.last_header
     temp.add_header(header)
     temp.add_bytes(9)  #less than a full frame
     frame_restart = temp.get_size()
     temp.add_valid_frames(10, header)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(20, len(mfile.frames), "Found more or less frames")
     self.assertEqual(1, len(mfile.other),
                      "Found data where there was none")
     self.assertEqual(0, mfile.frames[0][1],
                      "Found first frame at wrong position")
     self.assertEqual(frame_restart, mfile.frames[10][1],
                      "Didn't detect next full frame")
     self.assertEqual(
         junk_start, mfile.other[0].position,
         "Junk not found in correct location (junk is valid frame cut short)"
     )
     self.assertEqual(
         13, len(mfile.other[0]),
         "Junk found had wrong length (junk i svalid frame cut short)")
Example #2
0
 def junk_all_three(self):
     """implimentation of above."""
     config.OPTS.consecutive_frames_to_id = 3
     temp = SampleMP3File()
     junk_amount1 = 2007
     junk_amount2 = 5213
     junk_amount3 = 128
     temp.add_bytes(junk_amount1)
     temp.add_valid_frame()
     temp.add_valid_frames(9, temp.last_header)
     junk_start = temp.get_size()
     temp.add_bytes(junk_amount2)
     temp.add_valid_frames(10, temp.last_header)
     junk_start2 = temp.get_size()
     temp.add_bytes(junk_amount3)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(20, len(mfile.frames), "Found wrong number of frames")
     self.assertEqual(3, len(mfile.other),
                      "Found data where there was none")
     self.assertEqual(junk_amount1, mfile.frames[0][1],
                      "Found frame at wrong position")
     self.assertEqual(0, mfile.other[0].position,
                      "Junk found at wrong location")
     self.assertEqual(junk_start, mfile.other[1].position,
                      "Junk found at wrong location")
     self.assertEqual(junk_start2, mfile.other[2].position,
                      "Junk found at wrong location")
     self.assertEqual(junk_amount1, len(mfile.other[0]),
                      "Junk found had wrong length")
     self.assertEqual(junk_amount2, len(mfile.other[1]),
                      "Junk found had wrong length")
     self.assertEqual(junk_amount3, len(mfile.other[2]),
                      "Junk found had wrong length")
Example #3
0
 def basic_id3_test(self):
     """implement of above"""
     config.OPTS.consecutive_frames_to_id = 3
     temp = SampleMP3File()
     temp.add_id3v1_tag("a title","an artist", "an album")
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(1, len(mfile.other),"More than one tag found")
     self.assertEqual(id3.ID3v1x, type(mfile.other[0]), "failed to identify v1 tag")
     self.assertEqual(0, mfile.other[0].subversion, "Identified wrong subversion of tag")
     self.assertEqual(0, mfile.other[0].position, "failed to identify correct starting location")
Example #4
0
 def many_frames(self):
     """implimentation of above."""
     config.OPTS.consecutive_frames_to_id = 3
     temp = SampleMP3File()
     temp.add_valid_frames(100)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(100, len(mfile.frames),
                      "Found more or less than one frame")
     self.assertEqual(0, len(mfile.other),
                      "Found data where there was none")
     self.assertEqual(0, mfile.frames[0][1],
                      "Found frame at wrong position")
Example #5
0
 def multiple_junk(self):
     """implements the above"""
     config.OPTS.consecutive_frames_to_id = 3
     temp = SampleMP3File()
     temp.add_bytes(200)
     temp.add_valid_frames(5)
     tagstart = temp.get_size()
     temp.add_id3v1_tag("a title","an artist", "an album",track=5)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(2, len(mfile.other),"More than one tag found")
     tag = mfile.other[0]
     self.assertEqual(id3.ID3v1x, type(tag), "failed to identify v1 tag")
     self.assertEqual(1, tag.subversion, "Identified wrong subversion of tag")
     self.assertEqual(tagstart, tag.position, "failed to idenitfy correct starting location")
Example #6
0
 def only_junk(self):
     """implimentation of above."""
     config.OPTS.consecutive_frames_to_id = 2  #only one frame in sample file
     temp = SampleMP3File()
     junk_amount = 16384
     temp.add_bytes(junk_amount)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(0, len(mfile.frames),
                      "Found more or less than one frame")
     self.assertEqual(1, len(mfile.other),
                      "Found data where there was none")
     self.assertEqual(0, mfile.other[0].position,
                      "Junk found at wrong location")
     self.assertEqual(junk_amount, len(mfile.other[0]),
                      "Junk found had wrong length")
Example #7
0
 def identify_frame_after_false_seek(self):
     """Implimentation of above"""
     config.OPTS.consecutive_frames_to_id = 3
     temp = SampleMP3File()
     temp.add_char(255)
     temp.add_valid_frames(5)
     junkstart = temp.get_size()
     temp.add_char(255)
     temp.add_char(255)
     framestart = temp.get_size()
     temp.add_valid_frames(5)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(1, mfile.frames[0][1], "Didn't skip false seek byte")
     self.assertEqual(0, mfile.other[0].position,
                      "junk #1 found in wrong location")
     self.assertEqual(junkstart, mfile.other[1].position,
                      "junk #2 found in wrong location")
     self.assertEqual(2, len(mfile.other[1]), "junk was wrong length")
     self.assertEqual(framestart, mfile.frames[5][1],
                      "Didn't skip 2 byte false seek tag")
Example #8
0
 def short_frame_end(self):
     """implimentation of above."""
     config.OPTS.consecutive_frames_to_id = 2
     temp = SampleMP3File()
     temp.add_valid_frames(3)
     junk_start = temp.get_size()
     header = temp.last_header
     temp.add_header(header)
     temp.add_bytes(9)  #less than a full frame
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(3, len(mfile.frames),
                      "Found more or less than one frame")
     self.assertEqual(1, len(mfile.other),
                      "Found data where there was none")
     self.assertEqual(0, mfile.frames[0][1],
                      "Found frame at wrong position")
     self.assertEqual(junk_start, mfile.other[0].position,
                      "Junk found at wrong location")
     self.assertEqual(13, len(mfile.other[0]),
                      "Junk found had wrong length")
Example #9
0
 def junk_middle(self):
     """implimentation of above."""
     config.OPTS.consecutive_frames_to_id = 3  #only one frame in sample file
     temp = SampleMP3File()
     junk_amount = 2007
     temp.add_valid_frame()
     temp.add_valid_frames(9, temp.last_header)
     junk_start = temp.get_size()
     temp.add_bytes(junk_amount)
     temp.add_valid_frames(10, temp.last_header)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(20, len(mfile.frames), "Found wrong number of frames")
     self.assertEqual(1, len(mfile.other),
                      "Found data where there was none")
     self.assertEqual(0, mfile.frames[0][1],
                      "Found frame at wrong position")
     self.assertEqual(junk_start, mfile.other[0].position,
                      "Junk found at wrong location")
     self.assertEqual(junk_amount, len(mfile.other[0]),
                      "Junk found had wrong length")
Example #10
0
 def test_short_19_python_extended_lockon_test(self):
     """Because the python code uses two different methods to lock on - one
        to skip large empty chunks and one to quickly parse frequent hits,
        we must test both by exceeding the limit of the first."""
     config.OPTS.consecutive_frames_to_id = 3
     config.OPTS.use_numpy = False
     temp = SampleMP3File()
     temp.add_valid_frames(5)
     junkstart = temp.get_size()
     for _ in range(mp3file._MAX_INDEX_METHOD_SEARCHES * 2):
         temp.add_bytes(11)
         temp.add_char(255)
     nextframe = temp.get_size()
     temp.add_valid_frames(5)
     mfile = mp3file.MP3File(temp.get_file())
     mfile.scan_file()
     self.assertEqual(nextframe, mfile.frames[5][1],
                      "unable to find frame with secondary lockon method")
     self.assertEqual(junkstart, mfile.other[0].position,
                      "junk foun in wrong location")
     self.assertEqual(24 * mp3file._MAX_INDEX_METHOD_SEARCHES,
                      len(mfile.other[0]), "junk found was wrong size")