def main():
parser = argparse.ArgumentParser(
"frag6.py", description="IPv6 fragementation test tool")
parser.add_argument(
'--sendif',
nargs=1,
required=True,
help='The interface through which the packet will be sent')
parser.add_argument('--recvif',
nargs=1,
required=True,
help='The interface on which to check for the packet')
parser.add_argument('--src',
nargs=1,
required=True,
help='The source IP address')
parser.add_argument('--to',
nargs=1,
required=True,
help='The destination IP address')
parser.add_argument('--debug',
required=False,
action='store_true',
help='Enable test debugging')
args = parser.parse_args()
# Start sniffing on recvif
sniffer = Sniffer(args, check_icmp6_error)
sniffer2 = Sniffer(args, check_icmp6_error_2)
########################################################################
#
# A fragment with payload and offset set to add up to >64k when
# another frag with offset=0 arrives and has an unfrag part.
# This is us checking for all fragments queued already when the
# one with off=0 arrives. Note: unless the off=0 has its own problem
# it will be queued and off!=0 ones might be expunged with param prob.
#
# A: Reassembly failure, timeout after
# R: ICMPv6 param prob, param header (1st frag)
# R: ICMPv6 time exceeded (2nd frag, as off=0)
#
data = "6" * 15
ip6f01 = \
sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrFragment(offset=0x1ffc, m=0, id=8) / \
sp.UDP(dport=3456, sport=6543) / \
data
data = "6" * 8
ip6f02 = \
sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrDestOpt(options = \
sp.PadN(optdata="\x00\x00\x00\x00\x00\x00")) / \
sp.IPv6ExtHdrFragment(offset=0, m=1, id=8) / \
sp.UDP(dport=3456, sport=6543) / \
data
if args.debug:
ip6f01.display()
ip6f02.display()
sp.sendp(ip6f01, iface=args.sendif[0], verbose=False)
sp.sendp(ip6f02, iface=args.sendif[0], verbose=False)
sleep(1.00)
sniffer.setEnd()
sniffer.join()
if not sniffer.foundCorrectPacket:
sys.exit(1)
sleep(75)
sniffer2.setEnd()
sniffer2.join()
if not sniffer2.foundCorrectPacket:
sys.exit(1)
sys.exit(0)
def main():
parser = argparse.ArgumentParser(
"frag6.py", description="IPv6 fragementation test tool")
parser.add_argument(
'--sendif',
nargs=1,
required=True,
help='The interface through which the packet will be sent')
parser.add_argument('--recvif',
nargs=1,
required=True,
help='The interface on which to check for the packet')
parser.add_argument('--src',
nargs=1,
required=True,
help='The source IP address')
parser.add_argument('--to',
nargs=1,
required=True,
help='The destination IP address')
parser.add_argument('--debug',
required=False,
action='store_true',
help='Enable test debugging')
args = parser.parse_args()
# Start sniffing on recvif
sniffer = Sniffer(args, check_icmp6_error)
########################################################################
#
# Atomic fragment.
#
# A: Nothing listening on UDP port.
# R: ICMPv6 dst unreach, unreach port.
#
ip6f01 = sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrFragment(offset=0, m=0, id=3) / \
sp.UDP(dport=3456, sport=6543)
if args.debug:
ip6f01.display()
sp.sendp(ip6f01, iface=args.sendif[0], verbose=False)
sleep(0.10)
sniffer.setEnd()
sniffer.join()
if not sniffer.foundCorrectPacket:
sys.exit(1)
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # ##
#
# Atomic fragment with extension header.
#
# A: Nothing listening on UDP port.
# R: ICMPv6 dst unreach, unreach port.
#
# Start sniffing on recvif
sniffer = Sniffer(args, check_icmp6_error)
ip6f01 = sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrDestOpt(options = \
sp.PadN(optdata="\x00\x00\x00\x00\x00\x00")) / \
sp.IPv6ExtHdrFragment(offset=0, m=0, id=0x3001) / \
sp.UDP(dport=3456, sport=6543)
if args.debug:
ip6f01.display()
sp.sendp(ip6f01, iface=args.sendif[0], verbose=False)
sleep(0.10)
sniffer.setEnd()
sniffer.join()
if not sniffer.foundCorrectPacket:
sys.exit(1)
sys.exit(0)
def getExtHdrs(args):
ext = None
# XXX-TODO Try to put them in an order which could make sense
# in real life packets and according to the RFCs.
if args.hbh:
hbh = sp.IPv6ExtHdrHopByHop(options = \
sp.PadN(optdata="\x00\x00\x00\x00\x00\x00"))
ext = addExt(ext, hbh)
if args.rh:
rh = sp.IPv6ExtHdrRouting(type=0)
ext = addExt(ext, rh)
if args.frag6:
frag6 = sp.IPv6ExtHdrFragment(offset=0, m=0, id=0x1234)
ext = addExt(ext, frag6)
if args.esp:
# XXX TODO
esp = None
ext = addExt(ext, esp)
if args.ah:
# XXX TODO
ah = None
ext = addExt(ext, ah)
if args.dest:
dest = sp.IPv6ExtHdrDestOpt(options = \
sp.PadN(optdata="\x00\x00\x00\x00\x00\x00"))
ext = addExt(ext, dest)
if args.mobi:
# XXX TODO
mobi = None
ext = addExt(ext, mobi)
if args.hip:
# XXX TODO
hip = None
ext = addExt(ext, hip)
if args.shim6:
# XXX TODO
shim6 = None
ext = addExt(ext, shim6)
if args.proto253:
# XXX TODO
tft = None
ext = addExt(ext, tft)
if args.proto254:
# XXX TODO
tff = None
ext = addExt(ext, tff)
if args.hbhbad:
hbhbad = sp.IPv6ExtHdrHopByHop(options = \
sp.PadN(optdata="\x00\x00\x00\x00\x00\x00"))
ext = addExt(ext, hbhbad)
return ext
def main():
parser = argparse.ArgumentParser("frag6.py",
description="IPv6 fragementation test tool")
parser.add_argument('--sendif', nargs=1,
required=True,
help='The interface through which the packet will be sent')
parser.add_argument('--recvif', nargs=1,
required=True,
help='The interface on which to check for the packet')
parser.add_argument('--src', nargs=1,
required=True,
help='The source IP address')
parser.add_argument('--to', nargs=1,
required=True,
help='The destination IP address')
parser.add_argument('--debug',
required=False, action='store_true',
help='Enable test debugging')
args = parser.parse_args()
# Start sniffing on recvif
sniffer = Sniffer(args, check_icmp6_error)
########################################################################
#
# Send a proper first fragment (off=0) and a second fragment which
# just fits the 64k. The re-send the first fragment with an extra
# unfragmentable part making the 64k to exceed the limit.
# This is to make sure we don't allow to update meta-data for a
# 1st fragmented packet should a second arrive but given the
# fragmentable part is an exact duplicate only that fragment
# will be silently discarded.
#
# A: Reassembly failure, timeout after
# R: ICMPv6 time exceeded / statistics for the duplicate
#
data = "6" * 8
ip6f00 = \
sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrFragment(offset=0, m=1, id=20) / \
sp.UDP(dport=3456, sport=6543) / \
data
data = "6" * 15
ip6f01 = \
sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrFragment(offset=0x1ffc, m=0, id=20) / \
sp.UDP(dport=3456, sport=6543) / \
data
data = "6" * 8
ip6f02 = \
sp.Ether() / \
sp.IPv6(src=args.src[0], dst=args.to[0]) / \
sp.IPv6ExtHdrDestOpt(options = \
sp.PadN(optdata="\x00\x00\x00\x00\x00\x00")) / \
sp.IPv6ExtHdrFragment(offset=0, m=1, id=20) / \
sp.UDP(dport=3456, sport=6543) / \
data
if args.debug :
ip6f00.display()
ip6f01.display()
ip6f02.display()
sp.sendp(ip6f00, iface=args.sendif[0], verbose=False)
sp.sendp(ip6f01, iface=args.sendif[0], verbose=False)
sp.sendp(ip6f02, iface=args.sendif[0], verbose=False)
sleep(75)
sniffer.setEnd()
sniffer.join()
if not sniffer.foundCorrectPacket:
sys.exit(1)
sys.exit(0)