def main():
"""
The function that actually runs the REPL.
"""
port = find_microbit()
print('port', port)
if not port:
sys.stderr.write('Could not find micro:bit. Is it plugged in?\n')
sys.exit(0)
serial.tools.miniterm.EXITCHARCTER = character(b'\x1d')
miniterm = connect_miniterm(port)
# Emit some helpful information about the program and MicroPython.
shortcut_message = 'Quit: {} | Stop program: Ctrl+C | Reset: Ctrl+D\n'
help_message = 'Type \'help()\' (without the quotes) then press ENTER.\n'
exit_char = key_description(serial.tools.miniterm.EXITCHARCTER)
sys.stderr.write(shortcut_message.format(exit_char))
sys.stderr.write(help_message)
# Start everything.
console.setup()
miniterm.start()
miniterm.serial.write(b'\x03') # Connecting stops the running program.
try:
miniterm.join(True)
except KeyboardInterrupt:
pass
sys.stderr.write('\nEXIT - see you soon... :-)\n')
def main():
"""
The function that actually runs the REPL.
"""
port = find_microbit()
print('port', port)
if not port:
sys.stderr.write('Could not find micro:bit. Is it plugged in?\n')
sys.exit(0)
serial.tools.miniterm.EXITCHARCTER = character(b'\x1d')
miniterm = connect_miniterm(port)
# Emit some helpful information about the program and MicroPython.
shortcut_message = 'Quit: {} | Stop program: Ctrl+C | Reset: Ctrl+D\n'
help_message = 'Type \'help()\' (without the quotes) then press ENTER.\n'
exit_char = key_description(serial.tools.miniterm.EXITCHARCTER)
sys.stderr.write(shortcut_message.format(exit_char))
sys.stderr.write(help_message)
# Start everything.
console.setup()
miniterm.set_rx_encoding('utf-8')
miniterm.set_tx_encoding('utf-8')
miniterm.start()
miniterm.serial.write(b'\x03') # Connecting stops the running program.
try:
miniterm.join(True)
except KeyboardInterrupt:
pass
sys.stderr.write('\nEXIT - see you soon... :-)\n')
def main():
"""
The function that actually runs the REPL.
"""
if len(sys.argv) != 2:
print("Usage: microrepl.py /path/to/device")
port = sys.argv[1]
print('Device path', port)
serial.tools.miniterm.EXITCHARCTER = character(b'\x1d')
miniterm = connect_miniterm(port)
# Emit some helpful information about the program and MicroPython.
shortcut_message = 'Quit: {} | Stop program: Ctrl+C | Reset: Ctrl+D\n'
help_message = 'Type \'help()\' (without the quotes) then press ENTER.\n'
exit_char = key_description(serial.tools.miniterm.EXITCHARCTER)
sys.stderr.write(shortcut_message.format(exit_char))
sys.stderr.write(help_message)
# Start everything.
miniterm.set_rx_encoding('utf-8')
miniterm.set_tx_encoding('utf-8')
miniterm.start()
sleep(0.5)
miniterm.serial.write(b'\x03') # Connecting stops the running program.
try:
miniterm.join(True)
except KeyboardInterrupt:
pass
sys.stderr.write('\nEXIT - see you soon... :-)\n')
def main():
"""
The function that actually runs the REPL.
"""
port = find_microbit()
if not port:
sys.stderr.write('Could not find micro:bit. Is it plugged in?\n')
sys.exit(0)
serial.tools.miniterm.EXITCHARCTER = character(b'\x1d')
try:
miniterm = Miniterm(
port,
BAUDRATE,
PARITY,
rtscts=False,
xonxoff=False,
echo=False,
convert_outgoing=2,
repr_mode=0,
)
except serial.SerialException as e:
if e.errno == 16:
# Device is busy. Explain what to do.
sys.stderr.write("Found micro:bit, but the device is busy. " +
"Wait up to 20 seconds, or " +
"press the reset button on the " +
"back of the device next to the yellow light; " +
"then try again.\n")
else:
# Try to be as helpful as possible.
sys.stderr.write("Found micro:bit, but could not connect via" +
" port %r: %s\n" % (port, e))
sys.stderr.write("I'm not sure what to suggest. :-(\n")
sys.exit(1)
# Emit some helpful information about the program and MicroPython.
shortcut_message = 'Quit: {} | Stop program: Ctrl+C | Reset: Ctrl+D\n'
help_message = 'Type \'help()\' (without the quotes) then press ENTER.\n'
exit_char = key_description(serial.tools.miniterm.EXITCHARCTER)
sys.stderr.write(shortcut_message.format(exit_char))
sys.stderr.write(help_message)
# Start everything.
console.setup()
miniterm.start()
miniterm.serial.write(b'\x03') # Connecting stops the running program.
try:
miniterm.join(True)
except KeyboardInterrupt:
pass
sys.stderr.write('\nEXIT - see you soon... :-)\n')
def main(port, hexFile):
bl = Bootloader(port)
print('Using port', bl.port.name)
bl.set_break(True)
input('Reset PIC if not in bootloader mode, then press Enter...')
bl.set_break(False)
print('Connecting...')
bl.connect()
print('Found device ' + bl.dev_info[2] + ', bootloader v.' +
str(bl.bl_info['version_major']) + '.' +
str(bl.bl_info['version_minor']))
if hexFile is None:
print('No hex file given, exiting.')
return 0
bl.load_hex_file(hexFile)
print('Writing...')
bl.write()
print('Verifying...')
bl.verify()
print('Running...')
bl.run()
print('Launching serial terminal...')
# run serial.tools.miniterm (some code copied from miniterm's main function)
bl.port.baudrate = 19200 # reuse our port without closing and reopening it
# define our own filter to display non-printable chars as '<nn>' hexadecimal
class MyFilter(serial.tools.miniterm.Transform):
def rx(self, text):
r = ''
for c in text:
if ' ' <= c < '\x7f' or c in '\r\n\b\t':
r += c
else:
r += '<' + '{:02x}'.format(ord(c)) + '>'
return r
echo = rx
# add it to miniterm's table
serial.tools.miniterm.TRANSFORMATIONS['my_filter'] = MyFilter
miniterm = serial.tools.miniterm.Miniterm(bl.port,
filters=('my_filter', ),
eol='lf')
miniterm.exit_character = serial.tools.miniterm.unichr(0x03) # CTRL-C
miniterm.menu_character = serial.tools.miniterm.unichr(0x14) # CTRL-T
miniterm.set_rx_encoding('ascii')
miniterm.set_tx_encoding('ascii')
sys.stderr.write(
'--- Miniterm on {p.name} {p.baudrate},{p.bytesize},{p.parity},{p.stopbits} ---\n'
.format(p=miniterm.serial))
sys.stderr.write(
'--- Quit: {} | Menu: {} | Help: {} followed by {} ---\n'.format(
serial.tools.miniterm.key_description(miniterm.exit_character),
serial.tools.miniterm.key_description(miniterm.menu_character),
serial.tools.miniterm.key_description(miniterm.menu_character),
serial.tools.miniterm.key_description('\x08')))
miniterm.start()
try:
miniterm.join(True)
except KeyboardInterrupt:
pass
sys.stderr.write("\n--- exit ---\n")
miniterm.join()
miniterm.close()
"COM4",
115200,
do_not_open = True)
if not hasattr(serial_instance, 'cancel_read'):
# enable timeout for alive flag polling if cancel_read is not available
serial_instance.timeout = 1
serial_instance.open()
miniterm = ESPMiniterm(
serial_instance,
echo=False,
eol='crlf',
filters=["espstackdecoder"])
miniterm.exit_character = chr(0x03) #unichr(0x1d)
miniterm.menu_character = chr(0x14)
miniterm.raw = False
miniterm.set_rx_encoding('UTF-8')
miniterm.set_tx_encoding('UTF-8')
miniterm.start()
try:
miniterm.join(True)
except KeyboardInterrupt:
pass
sys.stderr.write("\n--- exit ---\n")
miniterm.join()
miniterm.close()