def handle(userToken, packetData):
try:
# Get usertoken data
userID = userToken.userID
username = userToken.username
# Start spectating packet
packetData = clientPackets.startSpectating(packetData)
# Stop spectating old user if needed
if (userToken.spectating != 0):
oldTargetToken = glob.tokens.getTokenFromUserID(
userToken.spectating)
oldTargetToken.enqueue(serverPackets.removeSpectator(userID))
userToken.stopSpectating()
# Start spectating new user
userToken.startSpectating(packetData["userID"])
# Get host token
targetToken = glob.tokens.getTokenFromUserID(packetData["userID"])
if (targetToken == None):
raise exceptions.tokenNotFoundException
# Add us to host's spectators
targetToken.addSpectator(userID)
# Send spectator join packet to host
targetToken.enqueue(serverPackets.addSpectator(userID))
# Join #spectator channel
userToken.enqueue(
serverPackets.channelJoinSuccess(userID, "#spectator"))
if (len(targetToken.spectators) == 1):
# First spectator, send #spectator join to host too
targetToken.enqueue(
serverPackets.channelJoinSuccess(userID, "#spectator"))
# Console output
consoleHelper.printColored(
"> {} are spectating {}".format(
username, userHelper.getUserUsername(packetData["userID"])),
bcolors.PINK)
consoleHelper.printColored(
"> {}'s spectators: {}".format(str(packetData["userID"]),
str(targetToken.spectators)),
bcolors.BLUE)
except exceptions.tokenNotFoundException:
# Stop spectating if token not found
consoleHelper.printColored("[!] Spectator start: token not found",
bcolors.RED)
userToken.stopSpectating()
def joinMatch(userToken, matchID, password):
try:
# TODO: leave other matches
# TODO: Stop spectating
# get usertoken data
userID = userToken.userID
username = userToken.username
# Make sure the match exists
if (matchID not in glob.matches.matches):
raise exceptions.matchNotFoundException
# Match exists, get object
match = glob.matches.matches[matchID]
# Check password
# TODO: Admins can enter every match
if (match.matchPassword != ""):
if (match.matchPassword != password):
raise exceptions.matchWrongPasswordException
# Password is correct, join match
result = match.userJoin(userID)
# Check if we've joined the match successfully
if (result == False):
raise exceptions.matchJoinErrorException
# Match joined, set matchID for usertoken
userToken.joinMatch(matchID)
# Send packets
userToken.enqueue(serverPackets.matchJoinSuccess(matchID))
userToken.enqueue(
serverPackets.channelJoinSuccess(userID, "#multiplayer"))
userToken.enqueue(
serverPackets.sendMessage(
"FokaBot", "#multiplayer",
"Hi {}, and welcome to ripple's multiplayer mode! This feature is still WIP and might have some issues. If you find any bugs, please report them (by clicking here)[https://ripple.moe/index.php?p=22]."
.format(username)))
except exceptions.matchNotFoundException:
userToken.enqueue(serverPackets.matchJoinFail())
consoleHelper.printColored(
"[!] {} has tried to join a mp room, but it doesn't exist".format(
userToken.username), bcolors.RED)
except exceptions.matchWrongPasswordException:
userToken.enqueue(serverPackets.matchJoinFail())
consoleHelper.printColored(
"[!] {} has tried to join a mp room, but he typed the wrong password"
.format(userToken.username), bcolors.RED)
except exceptions.matchJoinErrorException:
userToken.enqueue(serverPackets.matchJoinFail())
consoleHelper.printColored(
"[!] {} has tried to join a mp room, but an error has occured".
format(userToken.username), bcolors.RED)
def handle(userToken, packetData):
try:
# Get usertoken data
userID = userToken.userID
username = userToken.username
# Start spectating packet
packetData = clientPackets.startSpectating(packetData)
# Stop spectating old user if needed
if (userToken.spectating != 0):
oldTargetToken = glob.tokens.getTokenFromUserID(userToken.spectating)
oldTargetToken.enqueue(serverPackets.removeSpectator(userID))
userToken.stopSpectating()
# Start spectating new user
userToken.startSpectating(packetData["userID"])
# Get host token
targetToken = glob.tokens.getTokenFromUserID(packetData["userID"])
if (targetToken == None):
raise exceptions.tokenNotFoundException
# Add us to host's spectators
targetToken.addSpectator(userID)
# Send spectator join packet to host
targetToken.enqueue(serverPackets.addSpectator(userID))
# Join #spectator channel
userToken.enqueue(serverPackets.channelJoinSuccess(userID, "#spectator"))
if (len(targetToken.spectators) == 1):
# First spectator, send #spectator join to host too
targetToken.enqueue(serverPackets.channelJoinSuccess(userID, "#spectator"))
# Console output
consoleHelper.printColored("> {} are spectating {}".format(username, userHelper.getUserUsername(packetData["userID"])), bcolors.PINK)
consoleHelper.printColored("> {}'s spectators: {}".format(str(packetData["userID"]), str(targetToken.spectators)), bcolors.BLUE)
except exceptions.tokenNotFoundException:
# Stop spectating if token not found
consoleHelper.printColored("[!] Spectator start: token not found", bcolors.RED)
userToken.stopSpectating()
def joinChannel(userToken, channelName):
'''
Join a channel
userToken -- user token object of user that joins the chanlle
channelName -- name of channel
'''
try:
# Get usertoken data
username = userToken.username
userID = userToken.userID
userRank = userToken.rank
# Check spectator channel
# If it's spectator channel, skip checks and list stuff
if (channelName != "#spectator" and channelName != "#multiplayer"):
# Normal channel, do check stuff
# Make sure the channel exists
if (channelName not in glob.channels.channels):
raise exceptions.channelUnknownException
# Check channel permissions
if ((glob.channels.channels[channelName].publicWrite == False
or glob.channels.channels[channelName].moderated == True)
and userRank < 2):
raise exceptions.channelNoPermissionsException
# Add our userID to users in that channel
glob.channels.channels[channelName].userJoin(userID)
# Add the channel to our joined channel
userToken.joinChannel(channelName)
# Send channel joined
userToken.enqueue(serverPackets.channelJoinSuccess(
userID, channelName))
# Console output
consoleHelper.printColored(
"> {} joined channel {}".format(username, channelName),
bcolors.GREEN)
except exceptions.channelNoPermissionsException:
consoleHelper.printColored(
"[!] {} attempted to join channel {}, but they have no read permissions"
.format(username, channelName), bcolors.RED)
except exceptions.channelUnknownException:
consoleHelper.printColored(
"[!] {} attempted to join an unknown channel ({})".format(
username, channelName), bcolors.RED)
def joinMatch(userToken, matchID, password):
try:
# TODO: leave other matches
# TODO: Stop spectating
# get usertoken data
userID = userToken.userID
username = userToken.username
# Make sure the match exists
if matchID not in glob.matches.matches:
raise exceptions.matchNotFoundException
# Match exists, get object
match = glob.matches.matches[matchID]
# Check password
# TODO: Admins can enter every match
if match.matchPassword != "":
if match.matchPassword != password:
raise exceptions.matchWrongPasswordException
# Password is correct, join match
result = match.userJoin(userID)
# Check if we've joined the match successfully
if result == False:
raise exceptions.matchJoinErrorException
# Match joined, set matchID for usertoken
userToken.joinMatch(matchID)
# Send packets
userToken.enqueue(serverPackets.matchJoinSuccess(matchID))
userToken.enqueue(serverPackets.channelJoinSuccess(userID, "#multiplayer"))
userToken.enqueue(serverPackets.sendMessage("FokaBot", "#multiplayer", "Hi {}, and welcome to Ripple's multiplayer mode! This feature is still WIP and might have some issues. If you find any bugs, please report them (by clicking here)[https://ripple.moe/index.php?p=22].".format(username)))
except exceptions.matchNotFoundException:
userToken.enqueue(serverPackets.matchJoinFail())
consoleHelper.printColored("[!] {} has tried to join a mp room, but it doesn't exist".format(userToken.username), bcolors.RED)
except exceptions.matchWrongPasswordException:
userToken.enqueue(serverPackets.matchJoinFail())
consoleHelper.printColored("[!] {} has tried to join a mp room, but he typed the wrong password".format(userToken.username), bcolors.RED)
except exceptions.matchJoinErrorException:
userToken.enqueue(serverPackets.matchJoinFail())
consoleHelper.printColored("[!] {} has tried to join a mp room, but an error has occured".format(userToken.username), bcolors.RED)
def joinChannel(userToken, channelName):
'''
Join a channel
userToken -- user token object of user that joins the chanlle
channelName -- name of channel
'''
try:
# Get usertoken data
username = userToken.username
userID = userToken.userID
userRank = userToken.rank
# Check spectator channel
# If it's spectator channel, skip checks and list stuff
if channelName != "#spectator" and channelName != "#multiplayer":
# Normal channel, do check stuff
# Make sure the channel exists
if channelName not in glob.channels.channels:
raise exceptions.channelUnknownException
# Check channel permissions
if glob.channels.channels[channelName].publicRead == False and userRank <= 2:
raise exceptions.channelNoPermissionsException
# Add our userID to users in that channel
glob.channels.channels[channelName].userJoin(userID)
# Add the channel to our joined channel
userToken.joinChannel(channelName)
# Send channel joined
userToken.enqueue(serverPackets.channelJoinSuccess(userID, channelName))
# Console output
consoleHelper.printColored("> {} joined channel {}".format(username, channelName), bcolors.GREEN)
except exceptions.channelNoPermissionsException:
consoleHelper.printColored("[!] {} attempted to join channel {}, but they have no read permissions".format(username, channelName), bcolors.RED)
except exceptions.channelUnknownException:
consoleHelper.printColored("[!] {} attempted to join an unknown channel ({})".format(username, channelName), bcolors.RED)
def banchoServer():
if (flask.request.method == 'POST'):
# Client's token
requestToken = flask.request.headers.get('osu-token')
# Client's request data
# We remove the first two and last three characters because they are
# some escape stuff that we don't need
requestData = flask.request.data
# Client's IP
requestIP = flask.request.headers.get('X-Real-IP')
if (requestIP == None):
requestIP = flask.request.remote_addr
# Server's response data
responseData = bytes()
# Server's response token string
responseTokenString = "ayy";
if (requestToken == None):
# We don't have a token, this is the first packet aka login
print("> Accepting connection from "+requestIP+"...")
# Split POST body so we can get username/password/hardware data
loginData = str(requestData)[2:-3].split("\\n")
# Process login
print("> Processing login request for "+loginData[0]+"...")
try:
# If true, print error to console
err = False
# Try to get the ID from username
userID = userHelper.getUserID(str(loginData[0]))
if (userID == False):
# Invalid username
raise exceptions.loginFailedException()
if (userHelper.checkLogin(userID, loginData[1]) == False):
# Invalid password
raise exceptions.loginFailedException()
# Make sure we are not banned
userAllowed = userHelper.getUserAllowed(userID)
if (userAllowed == 0):
# Banned
raise exceptions.loginBannedException()
# No login errors!
# Delete old tokens for that user and generate a new one
glob.tokens.deleteOldTokens(userID)
responseToken = glob.tokens.addToken(userID)
responseTokenString = responseToken.token
# Print logged in message
consoleHelper.printColored("> "+loginData[0]+" logged in ("+responseToken.token+")", bcolors.GREEN)
# Get silence end
userSilenceEnd = max(0, userHelper.getUserSilenceEnd(userID)-int(time.time()))
# Get supporter/GMT
userRank = userHelper.getUserRank(userID)
userGMT = False
userSupporter = True
if (userRank >= 3):
userGMT = True
# Maintenance check
if (glob.banchoConf.config["banchoMaintenance"] == True):
if (userGMT == False):
# We are not mod/admin, delete token, send notification and logout
glob.tokens.deleteToken(responseTokenString)
raise exceptions.banchoMaintenanceException()
else:
# We are mod/admin, send warning notification and continue
responseToken.enqueue(serverPackets.notification("Bancho is in maintenance mode. Only mods/admins have full access to the server.\nType !system maintenance off in chat to turn off maintenance mode."))
# Send all needed login packets
responseToken.enqueue(serverPackets.silenceEndTime(userSilenceEnd))
responseToken.enqueue(serverPackets.userID(userID))
responseToken.enqueue(serverPackets.protocolVersion())
responseToken.enqueue(serverPackets.userSupporterGMT(userSupporter, userGMT))
responseToken.enqueue(serverPackets.userPanel(userID))
responseToken.enqueue(serverPackets.userStats(userID))
# Channel info end (before starting!?! wtf bancho?)
responseToken.enqueue(serverPackets.channelInfoEnd())
# TODO: Configurable default channels
# Default opened channels
glob.channels.channels["#osu"].userJoin(userID)
responseToken.joinChannel("#osu")
glob.channels.channels["#announce"].userJoin(userID)
responseToken.joinChannel("#announce")
responseToken.enqueue(serverPackets.channelJoinSuccess(userID, "#osu"))
responseToken.enqueue(serverPackets.channelJoinSuccess(userID, "#announce"))
# Output channels info
for key, value in glob.channels.channels.items():
responseToken.enqueue(serverPackets.channelInfo(key))
responseToken.enqueue(serverPackets.friendList(userID))
# Send main menu icon and login notification if needed
if (glob.banchoConf.config["menuIcon"] != ""):
responseToken.enqueue(serverPackets.mainMenuIcon(glob.banchoConf.config["menuIcon"]))
if (glob.banchoConf.config["loginNotification"] != ""):
responseToken.enqueue(serverPackets.notification(glob.banchoConf.config["loginNotification"]))
# Get everyone else userpanel
# TODO: Better online users handling
for key, value in glob.tokens.tokens.items():
responseToken.enqueue(serverPackets.userPanel(value.userID))
responseToken.enqueue(serverPackets.userStats(value.userID))
# Send online users IDs array
responseToken.enqueue(serverPackets.onlineUsers())
# Send to everyone our userpanel and userStats (so they now we have logged in)
glob.tokens.enqueueAll(serverPackets.userPanel(userID))
glob.tokens.enqueueAll(serverPackets.userStats(userID))
# Set position and country
responseToken.setLocation(locationHelper.getLocation(requestIP))
responseToken.setCountry(countryHelper.getCountryID(locationHelper.getCountry(requestIP)))
# Set reponse data to right value and reset our queue
responseData = responseToken.queue
responseToken.resetQueue()
except exceptions.loginFailedException:
# Login failed error packet
# (we don't use enqueue because we don't have a token since login has failed)
err = True
responseData += serverPackets.loginFailed()
except exceptions.loginBannedException:
# Login banned error packet
err = True
responseData += serverPackets.loginBanned()
except exceptions.banchoMaintenanceException:
# Bancho is in maintenance mode
responseData += serverPackets.notification("Our bancho server is in maintenance mode. Please try to login again later.")
responseData += serverPackets.loginError()
finally:
# Print login failed message to console if needed
if (err == True):
consoleHelper.printColored("> "+loginData[0]+"'s login failed", bcolors.YELLOW)
else:
try:
# This is not the first packet, send response based on client's request
# Packet start position, used to read stacked packets
pos = 0
# Make sure the token exists
if (requestToken not in glob.tokens.tokens):
raise exceptions.tokenNotFoundException()
# Token exists, get its object
userToken = glob.tokens.tokens[requestToken]
# Get userID and username from token
userID = userToken.userID
username = userToken.username
userRank = userToken.rank
# Keep reading packets until everything has been read
while pos < len(requestData):
# Get packet from stack starting from new packet
leftData = requestData[pos:]
# Get packet ID, data length and data
packetID = packetHelper.readPacketID(leftData)
dataLength = packetHelper.readPacketLength(leftData)
packetData = requestData[pos:(pos+dataLength+7)]
# Console output if needed
if (serverOutputPackets == True and packetID != 4):
consoleHelper.printColored("Incoming packet ("+requestToken+")("+username+"):", bcolors.GREEN)
consoleHelper.printColored("Packet code: "+str(packetID)+"\nPacket length: "+str(dataLength)+"\nSingle packet data: "+str(packetData)+"\n", bcolors.YELLOW)
# Packet switch
if (packetID == packetIDs.client_pong):
# Ping packet, nothing to do
# New packets are automatically taken from the queue
pass
elif (packetID == packetIDs.client_sendPublicMessage):
try:
# Public chat packet
packetData = clientPackets.sendPublicMessage(packetData)
# Receivers
who = []
# Check #spectator
if (packetData["to"] != "#spectator"):
# Standard channel
# Make sure the channel exists
if (packetData["to"] not in glob.channels.channels):
raise exceptions.channelUnknownException
# Make sure the channel is not in moderated mode
if (glob.channels.channels[packetData["to"]].moderated == True and userRank < 2):
raise exceptions.channelModeratedException
# Make sure we have write permissions
if (glob.channels.channels[packetData["to"]].publicWrite == False and userRank < 2):
raise exceptions.channelNoPermissionsException
# Send this packet to everyone in that channel except us
who = glob.channels.channels[packetData["to"]].getConnectedUsers()[:]
if userID in who:
who.remove(userID)
else:
# Spectator channel
# Send this packet to every spectator and host
if (userToken.spectating == 0):
# We have sent to send a message to our #spectator channel
targetToken = userToken
who = targetToken.spectators[:]
# No need to remove us because we are the host so we are not in spectators list
else:
# We have sent a message to someone else's #spectator
targetToken = glob.tokens.getTokenFromUserID(userToken.spectating)
who = targetToken.spectators[:]
# Remove us
if (userID in who):
who.remove(userID)
# Add host
who.append(targetToken.userID)
# Send packet to required users
glob.tokens.multipleEnqueue(serverPackets.sendMessage(username, packetData["to"], packetData["message"]), who, False)
# Fokabot command check
fokaMessage = fokabot.fokabotResponse(username, packetData["to"], packetData["message"])
if (fokaMessage != False):
who.append(userID)
glob.tokens.multipleEnqueue(serverPackets.sendMessage("FokaBot", packetData["to"], fokaMessage), who, False)
consoleHelper.printColored("> FokaBot@"+packetData["to"]+": "+str(fokaMessage.encode("UTF-8")), bcolors.PINK)
# Console output
consoleHelper.printColored("> "+username+"@"+packetData["to"]+": "+str(packetData["message"].encode("UTF-8")), bcolors.PINK)
except exceptions.channelModeratedException:
consoleHelper.printColored("[!] "+username+" has attempted to send a message to a channel that is in moderated mode ("+packetData["to"]+")", bcolors.RED)
except exceptions.channelUnknownException:
consoleHelper.printColored("[!] "+username+" has attempted to send a message to an unknown channel ("+packetData["to"]+")", bcolors.RED)
except exceptions.channelNoPermissionsException:
consoleHelper.printColored("[!] "+username+" has attempted to send a message to channel "+packetData["to"]+", but he has no write permissions", bcolors.RED)
elif (packetID == packetIDs.client_sendPrivateMessage):
try:
# Private message packet
packetData = clientPackets.sendPrivateMessage(packetData)
if (packetData["to"] == "FokaBot"):
# FokaBot command check
fokaMessage = fokabot.fokabotResponse(username, packetData["to"], packetData["message"])
if (fokaMessage != False):
userToken.enqueue(serverPackets.sendMessage("FokaBot", username, fokaMessage))
consoleHelper.printColored("> FokaBot>"+packetData["to"]+": "+str(fokaMessage.encode("UTF-8")), bcolors.PINK)
else:
# Send packet message to target if it exists
token = glob.tokens.getTokenFromUsername(packetData["to"])
if (token == None):
raise exceptions.tokenNotFoundException()
token.enqueue(serverPackets.sendMessage(username, packetData["to"], packetData["message"]))
# Console output
consoleHelper.printColored("> "+username+">"+packetData["to"]+": "+packetData["message"], bcolors.PINK)
except exceptions.tokenNotFoundException:
# Token not found, user disconnected
consoleHelper.printColored("[!] "+username+" has tried to send a message to "+packetData["to"]+", but its token couldn't be found", bcolors.RED)
elif (packetID == packetIDs.client_channelJoin):
try:
# Channel join packet
packetData = clientPackets.channelJoin(packetData)
# Check spectator channel
# If it's spectator channel, skip checks and list stuff
if (packetData["channel"] != "#spectator"):
# Normal channel, do check stuff
# Make sure the channel exists
if (packetData["channel"] not in glob.channels.channels):
raise exceptions.channelUnknownException
# Check channel permissions
if ((glob.channels.channels[packetData["channel"]].publicWrite == False or glob.channels.channels[packetData["channel"]].moderated == True) and userRank < 2):
raise exceptions.channelNoPermissionsException
# Add our userID to users in that channel
glob.channels.channels[packetData["channel"]].userJoin(userID)
# Add the channel to our joined channel
userToken.joinChannel(packetData["channel"])
# Send channel joined
userToken.enqueue(serverPackets.channelJoinSuccess(userID, packetData["channel"]))
# Console output
consoleHelper.printColored("> "+username+" has joined channel "+packetData["channel"], bcolors.GREEN)
except exceptions.channelNoPermissionsException:
consoleHelper.printColored("[!] "+username+" has attempted to join channel "+packetData["channel"]+", but he has no read permissions", bcolors.RED)
except exceptions.channelUnknownException:
consoleHelper.printColored("[!] "+username+" has attempted to join an unknown channel ("+packetData["channel"]+")", bcolors.RED)
elif (packetID == packetIDs.client_channelPart):
# Channel part packet
packetData = clientPackets.channelPart(packetData)
# Remove us from joined users and joined channels
if packetData["channel"] in glob.channels.channels:
userToken.partChannel(packetData["channel"])
glob.channels.channels[packetData["channel"]].userPart(userID)
# Console output
consoleHelper.printColored("> "+username+" has parted channel "+packetData["channel"], bcolors.YELLOW)
elif (packetID == packetIDs.client_changeAction):
# Change action packet
packetData = clientPackets.userActionChange(packetData)
# Update our action id, text and md5
userToken.actionID = packetData["actionID"]
userToken.actionText = packetData["actionText"]
userToken.actionMd5 = packetData["actionMd5"]
userToken.actionMods = packetData["actionMods"]
userToken.gameMode = packetData["gameMode"]
# Enqueue our new user panel and stats to everyone
glob.tokens.enqueueAll(serverPackets.userPanel(userID))
glob.tokens.enqueueAll(serverPackets.userStats(userID))
# Console output
print("> "+username+" has changed action: "+str(userToken.actionID)+" ["+userToken.actionText+"]["+userToken.actionMd5+"]")
elif (packetID == packetIDs.client_startSpectating):
try:
# Start spectating packet
packetData = clientPackets.startSpectating(packetData)
# Stop spectating old user if needed
if (userToken.spectating != 0):
oldTargetToken = glob.tokens.getTokenFromUserID(userToken.spectating)
oldTargetToken.enqueue(serverPackets.removeSpectator(userID))
userToken.stopSpectating()
# Start spectating new user
userToken.startSpectating(packetData["userID"])
# Get host token
targetToken = glob.tokens.getTokenFromUserID(packetData["userID"])
if (targetToken == None):
raise exceptions.tokenNotFoundException
# Add us to host's spectators
targetToken.addSpectator(userID)
# Send spectator join packet to host
targetToken.enqueue(serverPackets.addSpectator(userID))
# Join #spectator channel
userToken.enqueue(serverPackets.channelJoinSuccess(userID, "#spectator"))
if (len(targetToken.spectators) == 1):
# First spectator, send #spectator join to host too
targetToken.enqueue(serverPackets.channelJoinSuccess(userID, "#spectator"))
# Console output
consoleHelper.printColored("> "+username+" is spectating "+userHelper.getUserUsername(packetData["userID"]), bcolors.PINK)
consoleHelper.printColored("> {}'s spectators: {}".format(str(packetData["userID"]), str(targetToken.spectators)), bcolors.BLUE)
except exceptions.tokenNotFoundException:
# Stop spectating if token not found
consoleHelper.printColored("[!] Spectator start: token not found", bcolors.RED)
userToken.stopSpectating()
elif (packetID == packetIDs.client_stopSpectating):
try:
# Stop spectating packet, has no parameters
# Remove our userID from host's spectators
target = userToken.spectating
targetToken = glob.tokens.getTokenFromUserID(target)
if (targetToken == None):
raise exceptions.tokenNotFoundException
targetToken.removeSpectator(userID)
# Send the spectator left packet to host
targetToken.enqueue(serverPackets.removeSpectator(userID))
# Console output
# TODO: Move messages in stop spectating
consoleHelper.printColored("> "+username+" is no longer spectating whoever he was spectating", bcolors.PINK)
consoleHelper.printColored("> {}'s spectators: {}".format(str(target), str(targetToken.spectators)), bcolors.BLUE)
except exceptions.tokenNotFoundException:
consoleHelper.printColored("[!] Spectator stop: token not found", bcolors.RED)
finally:
# Set our spectating user to 0
userToken.stopSpectating()
elif (packetID == packetIDs.client_cantSpectate):
try:
# We don't have the beatmap, we can't spectate
target = userToken.spectating
targetToken = glob.tokens.getTokenFromUserID(target)
# Send the packet to host
targetToken.enqueue(serverPackets.noSongSpectator(userID))
except exceptions.tokenNotFoundException:
# Stop spectating if token not found
consoleHelper.printColored("[!] Spectator can't spectate: token not found", bcolors.RED)
userToken.stopSpectating()
elif (packetID == packetIDs.client_spectateFrames):
# Client spectate frames
# Send spectator frames to every spectator
consoleHelper.printColored("> {}'s spectators: {}".format(str(userID), str(userToken.spectators)), bcolors.BLUE)
for i in userToken.spectators:
if (i != userID):
# TODO: Check that spectators are spectating us
# Send to every spectator but us (host)
spectatorToken = glob.tokens.getTokenFromUserID(i)
if (spectatorToken != None):
# Token found, send frames
spectatorToken.enqueue(serverPackets.spectatorFrames(packetData[7:]))
else:
# Token not found, remove it
userToken.removeSpectator(i)
userToken.enqueue(serverPackets.removeSpectator(i))
elif (packetID == packetIDs.client_friendAdd):
# Friend add packet
packetData = clientPackets.addRemoveFriend(packetData)
userHelper.addFriend(userID, packetData["friendID"])
# Console output
print("> "+username+" has added "+str(packetData["friendID"])+" to his friends")
elif (packetID == packetIDs.client_friendRemove):
# Friend remove packet
packetData = clientPackets.addRemoveFriend(packetData)
userHelper.removeFriend(userID, packetData["friendID"])
# Console output
print("> "+username+" has removed "+str(packetData["friendID"])+" from his friends")
elif (packetID == packetIDs.client_logout):
# Logout packet, no parameters to read
# Big client meme here. If someone logs out and logs in right after,
# the old logout packet will still be in the queue and will be sent to
# the server, so we accept logout packets sent at least 5 seconds after login
if (int(time.time()-userToken.loginTime) >= 5):
# TODO: Channel part at logout
# TODO: Stop spectating at logout
# TODO: Stop spectating at timeout
# Enqueue our disconnection to everyone else
glob.tokens.enqueueAll(serverPackets.userLogout(userID))
# Delete token
glob.tokens.deleteToken(requestToken)
consoleHelper.printColored("> "+username+" has been disconnected (logout)", bcolors.YELLOW)
# Set reponse data and tokenstring to right value and reset our queue
# Update pos so we can read the next stacked packet
pos += dataLength+7 # add packet ID bytes, unused byte and data length bytes
# WHILE END
# Token queue built, send it
# TODO: Move somewhere else
responseTokenString = userToken.token
responseData = userToken.queue
userToken.resetQueue()
# Update ping time for timeout
userToken.updatePingTime()
except exceptions.tokenNotFoundException:
# Token not found. Disconnect that user
responseData = serverPackets.loginError()
responseData += serverPackets.notification("Whoops! Something went wrong, please login again.")
consoleHelper.printColored("[!] Received packet from unknown token ("+requestToken+").", bcolors.RED)
consoleHelper.printColored("> "+requestToken+" has been disconnected (invalid token)", bcolors.YELLOW)
# Send server's response to client
# We don't use token object because we might not have a token (failed login)
return responseHelper.generateResponse(responseTokenString, responseData)
else:
# Not a POST request, send html page
# TODO: Fix this crap
return responseHelper.HTMLResponse()