def get_upload_user_region():
try:
config = configparser.ConfigParser()
config.read(APPLIANCE_UPLOAD_USER_CONFIG_PATH)
return config.get(DEFAULT_PROFILE, 'region')
except exceptions.ConfigFileNotFound as e:
error_message_wrapper(
'Unable to parse the upload user config file %s: %s' %
(APPLIANCE_UPLOAD_USER_CONFIG_PATH, e))
def verify_upload_user_credentials_extended(ctx, from_json, bucket, **kwargs):
create_transfer_job_client(ctx)
try:
validate_upload_user_credentials(ctx, bucket, None)
click.echo("Successfully verified upload user credentials")
except Exception as e:
error_message_wrapper("Failed to verify upload user credentials: %s" %
e)
def get_upload_user_config():
try:
upload_user_config = oci_config.from_file(
file_location=APPLIANCE_UPLOAD_USER_CONFIG_PATH,
profile_name="DEFAULT")
return upload_user_config
except exceptions.ConfigFileNotFound as e:
error_message_wrapper(
'Unable to parse the upload user config file %s: %s' %
(APPLIANCE_UPLOAD_USER_CONFIG_PATH, e))
def validate_upload_user_credentials(ctx,
upload_bucket,
upload_user_config=None):
"""
There are two users, the admin user and the upload user
The admin user is the one who has access to the user's tenancy and can perform operations like creating a job,
requesting an appliance, etc.
The upload user has enough permissions to just upload data to a particular user bucket. The upload user cannot
delete objects from the bucket nor can it make modifications to the bucket or account. In essence it is a
restricted user.
The upload user is defined in ~/.oci/config_upload_user under the [DEFAULT] section. There is no way to change
the file and the section. These are standards that are expected
The idea of validation is to check whether the upload user has the ability to create objects, inspect the object
and read the object's meta data from Oracle Cloud Infrastructure
The procedure is this:
1. Admin user tries to get the test object and delete it if it is present.
- This is more of an error check when there is a stale object present from a previous failed run
- Only the admin user, NOT the upload user, can delete an object
2. Upload user creates the test object
3. Upload user overwrites the test object
4. Upload user gets the checksum of the test object
5. Upload user gets the metadata of the test bucket
6. Admin user deletes the test object
:param upload_bucket: The bucket to upload to
:param upload_user_config: config built from APPLIANCE_UPLOAD_USER_CONFIG_PATH
:return: None
"""
# Overriding any endpoint that was set. Need to get to the endpoint based on the config file, not based on the
# override parameter
ctx.endpoint = None
ctx.obj['endpoint'] = None
# To support cross region uploads. get the region from the Upload User file
# For example, let's say the config file had us-phoenix-1 as the region and config_upload_user had us-ashburn-1
# If the region is not changed in the context, the admin client would be talking to us-phoenix-1 whereas the
# upload client would be talking to us-ashburn-1. That's not what we want.
try:
if not upload_user_config:
upload_user_config = get_upload_user_config()
oci_config.validate_config(upload_user_config)
except exceptions.ProfileNotFound as e:
error_message_wrapper(
'ProfileNotFound: Unable to parse the upload user config file %s: %s'
% (APPLIANCE_UPLOAD_USER_CONFIG_PATH, e))
except exceptions.InvalidConfig as bad_config:
table = render_config_errors(bad_config)
template = "InvalidConfig: The config file at {config_file} is invalid:\n\n{errors}"
error_message_wrapper(
template.format(config_file=APPLIANCE_UPLOAD_USER_CONFIG_PATH,
errors=table))
admin_user = get_user(ctx)
region = get_upload_user_region()
if 'config' in ctx.obj: # config loaded/present
if 'region' in ctx.obj['config'] and ctx.obj['config'][
'region']: # region present in ~/.oci/config
if region: # region present in APPLIANCE_UPLOAD_USER_CONFIG_PATH
if ctx.obj['config']['region'].strip() != region.strip():
confirm_prompt = "WARNING: The config file under {config_path}/config: '{config_region}' has different region than "\
"{upload_user_path}: '{upload_user_region}'. Are you sure you want to continue with " \
"'{upload_user_region}'?".format(config_path=CONFIG_DIR,
upload_user_path=APPLIANCE_UPLOAD_USER_CONFIG_PATH,
config_region=ctx.obj['config']['region'], upload_user_region=region)
if not click.confirm(
click.style(confirm_prompt, fg="yellow")):
error_message_wrapper("Aborted. Exiting...")
ctx.obj['region'] = region
ctx.obj['config']['region'] = region
object_storage_admin_client = create_obj_storage_client(ctx)
# A bit hacky but gets the job done. Only two parameters need to be changed to get the upload user context,
# the profile and the config file. All other parameters remain the same
upload_user_ctx = ctx
upload_user_ctx.obj['profile'] = 'DEFAULT'
upload_user_ctx.obj[
'config_file'] = APPLIANCE_UPLOAD_USER_CONFIG_PATH
# Overriding any endpoint that was set. Need to get to the endpoint based on the config_upload_user file
upload_user_ctx.endpoint = None
object_storage_upload_client = create_obj_storage_client(
upload_user_ctx)
namespace = object_storage_admin_client.get_namespace().data
try:
try:
object_storage_admin_client.head_object(
namespace, upload_bucket, TEST_OBJECT)
click.echo(
"Found test object in bucket. Deleting it...")
object_storage_admin_client.delete_object(
namespace, upload_bucket, TEST_OBJECT)
except exceptions.ServiceError as se:
if se.status != 404:
raise se
except Exception as e:
raise exceptions.RequestException(
"Admin user {} failed to delete the test object {}: {}"
.format(admin_user, TEST_OBJECT, str(e)))
test_object_content = "Bulk Data Transfer Test"
operation = None
test_object_exists = False
try:
operation = "Create object {} in bucket {} using upload user".format(
TEST_OBJECT, upload_bucket)
object_storage_upload_client.put_object(
namespace, upload_bucket, TEST_OBJECT,
test_object_content)
click.echo(operation)
test_object_exists = True
operation = "Overwrite object {} in bucket {} using upload user".format(
TEST_OBJECT, upload_bucket)
object_storage_upload_client.put_object(
namespace, upload_bucket, TEST_OBJECT,
test_object_content)
click.echo(operation)
operation = "Inspect object {} in bucket {} using upload user".format(
TEST_OBJECT, upload_bucket)
object_storage_upload_client.head_object(
namespace, upload_bucket, TEST_OBJECT)
click.echo(operation)
operation = "Read bucket metadata {} using upload user".format(
upload_bucket)
metadata = object_storage_upload_client.get_bucket(
namespace, upload_bucket).data.metadata
click.echo(operation)
except exceptions.ServiceError as se:
raise exceptions.RequestException(
"Failed to {} in tenancy {} as upload user: {}".format(
operation, namespace, se.message))
finally:
if test_object_exists:
try:
object_storage_admin_client.delete_object(
namespace, upload_bucket, TEST_OBJECT)
except exceptions.ServiceError as se:
raise exceptions.ServiceError(
"Failed to delete test object {} as admin user {}: {}"
.format(TEST_OBJECT, admin_user, se.message))
else:
error_message_wrapper(
'Unable to parse the upload user config file. Region not found in %s'
% APPLIANCE_UPLOAD_USER_CONFIG_PATH)
else:
error_message_wrapper(
'Unable to parse the config file. Region not found in %s/config'
% CONFIG_DIR)
else:
error_message_wrapper('Unable to parse the config file at %s/config' %
CONFIG_DIR)