def make_write_enable():
number_inputs = 16
device = new_tree_decoder([8,8])
#device = new_decoder(number_inputs, False)
device['type'] = 'write_enable'
device['name'] = 'write_enable_0'
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)
def make_or(number_inputs):
device_data = make_prim_part("or", number_inputs)
switch_list = ['switch'+str(i) for i in range(number_inputs)]
wires = device_data['wires']
set_wire(wires, "sourcetoswitch", ['source0'], switch_list)
set_wire(wires, "switchtoresistor", switch_list, ['resistor0', 'out'])
device_file_path = str(DEVICE_DIR) + '/' + 'or' + str(number_inputs) + '.json'
write_json(device_data, device_file_path)
def make_write_select():
'''
Select writeone or writeo?
'''
device = new_mux(1, is_dual=False, in_pre='write', select_pre='select', out='w')
device['type'] = 'write_select'
device['name'] = 'write_select0'
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)
def make_mem_mux():
'''
64x32x32
'''
sizes = [6,5,5]
select_sets = get_select_sets(sizes)
device = new_mem_mux(select_sets)
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)
def make_and(number_inputs):
device_data = make_prim_part("and", number_inputs)
wires = device_data['wires']
set_wire(wires, "sourcetoswitch", ['source0'], ['switch0'])
for index in range(number_inputs-1):
i = str(index)
inext = str(index+1)
set_wire(wires, "wireswitch"+i+"to"+inext, ['switch'+i], ['switch'+inext])
set_wire(wires, "switchtoresistor", ['switch'+str(number_inputs-1)], ['resistor0', 'out'])
device_file_path = str(DEVICE_DIR) + '/' + 'and' + str(number_inputs) + '.json'
write_json(device_data, device_file_path)
def make_pc_add():
wires = []
devices = []
device = {
'wires': wires,
'type': 'pc_add',
'name': 'pc_add0',
'devices': devices
}
digits = 10
half = digits/2
wires_map = {}
first = new_add(half)
first['name'] = 'first'
second = new_add(half)
second['name'] = 'second'
for index in range(half):
i = str(index)
aname = "a_"+i
bname = 'b_'+i
append_bridge(devices, aname)
set_wire(wires_map, [aname], ['first/a_'+i])
append_bridge(devices, "b_"+i)
set_wire(wires_map, [bname], ['first/b_'+i])
out = 'o_'+i
append_bridge(devices, out)
set_wire(wires_map, ['first/'+out], [out])
for index in range(half):
i = str(index)
offset = str(index+half)
aname = "a_"+offset
bname = 'b_'+offset
append_bridge(devices, aname)
set_wire(wires_map, [aname], ['second/a_'+i])
append_bridge(devices, bname)
set_wire(wires_map, [bname], ['second/b_'+i])
set_wire
out = 'o_'+i
append_bridge(devices, out)
set_wire(wires_map, ['second/'+out], ['o_'+offset])
set_wire(wires_map, ['first/c_out'], ['second/c_in'])
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)
def make_pc_select():
device = new_pc_select()
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)
def make_device(new_function, *args):
device = new_function(*args)
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)
def make_prim_dual(prim_type, number_inputs):
devices = []
wires = []
device_type = prim_type+str(number_inputs)+"dual"
(ds, ws) = make_prim_part_dual(number_inputs)
devices.extend(ds)
wires.extend(ws)
value_sets = itertools.product([False,True], repeat=number_inputs)
and_values= []
logic_function = get_or if prim_type =='or' else get_and
for value_set_index, value_set in enumerate(value_sets):
set_i = str(value_set_index)
and_values.append(logic_function(value_set))
for index, value in enumerate(value_set):
i = str(index)
if value:
wiredown = get_wire(wires, 'wirenot'+i+"down")
wireup = get_wire(wires, 'wirein'+i+"up")
else:
wiredown = get_wire(wires, 'wirein'+i+"down")
wireup = get_wire(wires, 'wirenot'+i+"up")
wiredown['to'].append('and'+set_i+"/in"+str(2*index))
wireup['to'].append('and'+set_i+"/in"+str(2*index+1))
ones = 0
zeros = 0
for value in and_values:
if value:
ones += 1
else:
zeros += 1
if ones > 1:
devices.append(new_device("or1", "or"+str(ones)))
wire = {
"name": "wireor1",
"from": ["or1/out"],
"to": ["outup"]
}
wires.append(wire)
if zeros > 1:
devices.append(new_device("or0", "or"+str(zeros)))
wire = {
"name": "wireor0",
"from": ["or0/out"],
"to": ["outdown"]
}
wires.append(wire)
onei = 0
zeroi = 0
for index, value in enumerate(and_values):
i = str(index)
devices.append(new_device("and"+i, "and"+str(number_inputs*2)))
if value:
output = "outup" if ones <= 1 else "or1/in"+str(onei)
set_wire(wires, "wireand" + i, ["and"+i+"/out"], [output])
onei+=1
else:
output = "outdown" if zeros <= 1 else "or0/in"+str(zeroi)
set_wire(wires, "wireand" + i, ["and"+i+"/out"], [output])
zeroi+=1
#TODO only have or gate if there is more than one output
data = {
"name": device_type+"0",
"type": device_type,
"wires": wires,
"devices": devices
}
device_file_path = str(DEVICE_DIR) + '/' + device_type + '.json'
write_json(data, device_file_path)
def make_decoder(number_inputs, is_dual=False):
data = new_decoder(number_inputs, is_dual)
device_file_path = str(DEVICE_DIR) + '/' + data['type'] + '.json'
write_json(data, device_file_path)
def make_mux(number_selects, is_dual):
mux = new_mux(number_selects, is_dual)
device_type = get_mux_type(number_selects, is_dual)
device_file_path = str(DEVICE_DIR) + '/' + device_type + '.json'
write_json(mux, device_file_path)
def make_add(number_inputs):
device = new_add(number_inputs)
device_file_path = str(DEVICE_DIR) + '/' + device['type'] + '.json'
write_json(device, device_file_path)