def getPrivateSigningKey( address ):
try:
privSigningKeyBase58 = shared.config.get( address, 'privsigningkey' )
except:
return None
return shared.decodeWalletImportFormat( privSigningKeyBase58 )
def getPrivateSigningKey(address):
try:
privSigningKeyBase58 = shared.config.get(address, 'privsigningkey')
except:
return None
return shared.decodeWalletImportFormat(privSigningKeyBase58)
def sendMsg(self):
# Check to see if there are any messages queued to be sent
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''SELECT DISTINCT toaddress FROM sent WHERE (status='msgqueued' AND folder='sent')''')
shared.sqlSubmitQueue.put('')
queryreturn = shared.sqlReturnQueue.get()
shared.sqlLock.release()
for row in queryreturn: # For each address to which we need to send a message, check to see if we have its pubkey already.
toaddress, = row
toripe = decodeAddress(toaddress)[3]
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''SELECT hash FROM pubkeys WHERE hash=? ''')
shared.sqlSubmitQueue.put((toripe,))
queryreturn = shared.sqlReturnQueue.get()
shared.sqlLock.release()
if queryreturn != []: # If we have the needed pubkey, set the status to doingmsgpow (we'll do it further down)
t = (toaddress,)
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''UPDATE sent SET status='doingmsgpow' WHERE toaddress=? AND status='msgqueued' ''')
shared.sqlSubmitQueue.put(t)
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
else: # We don't have the needed pubkey. Set the status to 'awaitingpubkey' and request it if we haven't already
if toripe in shared.neededPubkeys:
# We already sent a request for the pubkey
t = (toaddress,)
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''UPDATE sent SET status='awaitingpubkey' WHERE toaddress=? AND status='msgqueued' ''')
shared.sqlSubmitQueue.put(t)
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, tr.translateText("MainWindow",'Encryption key was requested earlier.'))))
else:
# We have not yet sent a request for the pubkey
t = (toaddress,)
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''UPDATE sent SET status='doingpubkeypow' WHERE toaddress=? AND status='msgqueued' ''')
shared.sqlSubmitQueue.put(t)
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, tr.translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
self.requestPubKey(toaddress)
shared.sqlLock.acquire()
# Get all messages that are ready to be sent, and also all messages
# which we have sent in the last 28 days which were previously marked
# as 'toodifficult'. If the user as raised the maximum acceptable
# difficulty then those messages may now be sendable.
shared.sqlSubmitQueue.put(
'''SELECT toaddress, toripe, fromaddress, subject, message, ackdata, status FROM sent WHERE (status='doingmsgpow' or status='forcepow' or (status='toodifficult' and lastactiontime>?)) and folder='sent' ''')
shared.sqlSubmitQueue.put((int(time.time()) - 2419200,))
queryreturn = shared.sqlReturnQueue.get()
shared.sqlLock.release()
for row in queryreturn: # For each message we need to send..
toaddress, toripe, fromaddress, subject, message, ackdata, status = row
# There is a remote possibility that we may no longer have the
# recipient's pubkey. Let us make sure we still have it or else the
# sendMsg function will appear to freeze. This can happen if the
# user sends a message but doesn't let the POW function finish,
# then leaves their client off for a long time which could cause
# the needed pubkey to expire and be deleted.
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''SELECT hash FROM pubkeys WHERE hash=? ''')
shared.sqlSubmitQueue.put((toripe,))
queryreturn = shared.sqlReturnQueue.get()
shared.sqlLock.release()
if queryreturn == [] and toripe not in shared.neededPubkeys:
# We no longer have the needed pubkey and we haven't requested
# it.
with shared.printLock:
sys.stderr.write(
'For some reason, the status of a message in our outbox is \'doingmsgpow\' even though we lack the pubkey. Here is the RIPE hash of the needed pubkey: %s\n' % toripe.encode('hex'))
t = (toaddress,)
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put(
'''UPDATE sent SET status='msgqueued' WHERE toaddress=? AND status='doingmsgpow' ''')
shared.sqlSubmitQueue.put(t)
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, tr.translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
self.requestPubKey(toaddress)
continue
shared.ackdataForWhichImWatching[ackdata] = 0
toStatus, toAddressVersionNumber, toStreamNumber, toHash = decodeAddress(
toaddress)
fromStatus, fromAddressVersionNumber, fromStreamNumber, fromHash = decodeAddress(
fromaddress)
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Looking up the receiver\'s public key"))))
with shared.printLock:
print 'Found a message in our database that needs to be sent with this pubkey.'
print 'First 150 characters of message:', repr(message[:150])
# mark the pubkey as 'usedpersonally' so that we don't ever delete
# it.
shared.sqlLock.acquire()
t = (toripe,)
shared.sqlSubmitQueue.put(
'''UPDATE pubkeys SET usedpersonally='yes' WHERE hash=?''')
shared.sqlSubmitQueue.put(t)
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
# Let us fetch the recipient's public key out of our database. If
# the required proof of work difficulty is too hard then we'll
# abort.
shared.sqlSubmitQueue.put(
'SELECT transmitdata FROM pubkeys WHERE hash=?')
shared.sqlSubmitQueue.put((toripe,))
queryreturn = shared.sqlReturnQueue.get()
shared.sqlLock.release()
if queryreturn == []:
with shared.printLock:
sys.stderr.write(
'(within sendMsg) The needed pubkey was not found. This should never happen. Aborting send.\n')
return
for row in queryreturn:
pubkeyPayload, = row
# The pubkey message is stored the way we originally received it
# which means that we need to read beyond things like the nonce and
# time to get to the actual public keys.
readPosition = 8 # to bypass the nonce
pubkeyEmbeddedTime, = unpack(
'>I', pubkeyPayload[readPosition:readPosition + 4])
# This section is used for the transition from 32 bit time to 64
# bit time in the protocol.
if pubkeyEmbeddedTime == 0:
pubkeyEmbeddedTime, = unpack(
'>Q', pubkeyPayload[readPosition:readPosition + 8])
readPosition += 8
else:
readPosition += 4
readPosition += 1 # to bypass the address version whose length is definitely 1
streamNumber, streamNumberLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += streamNumberLength
behaviorBitfield = pubkeyPayload[readPosition:readPosition + 4]
readPosition += 4 # to bypass the bitfield of behaviors
# pubSigningKeyBase256 =
# pubkeyPayload[readPosition:readPosition+64] #We don't use this
# key for anything here.
readPosition += 64
pubEncryptionKeyBase256 = pubkeyPayload[
readPosition:readPosition + 64]
readPosition += 64
if toAddressVersionNumber == 2:
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nThere is no required difficulty for version 2 addresses like this."))))
elif toAddressVersionNumber == 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
if requiredAverageProofOfWorkNonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte: # We still have to meet a minimum POW difficulty regardless of what they say is allowed in order to get our message to propagate through the network.
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nReceiver\'s required difficulty: %1 and %2").arg(str(float(
requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)))))
if status != 'forcepow':
if (requiredAverageProofOfWorkNonceTrialsPerByte > shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') and shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') != 0) or (requiredPayloadLengthExtraBytes > shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') and shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') != 0):
# The demanded difficulty is more than we are willing
# to do.
shared.sqlLock.acquire()
t = (ackdata,)
shared.sqlSubmitQueue.put(
'''UPDATE sent SET status='toodifficult' WHERE ackdata=? ''')
shared.sqlSubmitQueue.put(t)
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do.").arg(str(float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(
requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)).arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
continue
embeddedTime = pack('>Q', (int(time.time()) + random.randrange(
-300, 300))) # the current time plus or minus five minutes. We will use this time both for our message and for the ackdata packed within our message.
if fromAddressVersionNumber == 2:
payload = '\x01' # Message version.
payload += encodeVarint(fromAddressVersionNumber)
payload += encodeVarint(fromStreamNumber)
payload += '\x00\x00\x00\x01' # Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features )
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[
1:] # The \x04 on the beginning of the public keys are not sent. This way there is only one acceptable way to encode and send a public key.
payload += pubEncryptionKey[1:]
payload += toHash # This hash will be checked by the receiver of the message to verify that toHash belongs to them. This prevents a Surreptitious Forwarding Attack.
payload += '\x02' # Type 2 is simple UTF-8 message encoding as specified on the Protocol Specification on the Bitmessage Wiki.
messageToTransmit = 'Subject:' + \
subject + '\n' + 'Body:' + message
payload += encodeVarint(len(messageToTransmit))
payload += messageToTransmit
fullAckPayload = self.generateFullAckMessage(
ackdata, toStreamNumber, embeddedTime) # The fullAckPayload is a normal msg protocol message with the proof of work already completed that the receiver of this message can easily send out.
payload += encodeVarint(len(fullAckPayload))
payload += fullAckPayload
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
if fromAddressVersionNumber == 3:
payload = '\x01' # Message version.
payload += encodeVarint(fromAddressVersionNumber)
payload += encodeVarint(fromStreamNumber)
payload += '\x00\x00\x00\x01' # Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features )
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[
1:] # The \x04 on the beginning of the public keys are not sent. This way there is only one acceptable way to encode and send a public key.
payload += pubEncryptionKey[1:]
# If the receiver of our message is in our address book,
# subscriptions list, or whitelist then we will allow them to
# do the network-minimum proof of work. Let us check to see if
# the receiver is in any of those lists.
if shared.isAddressInMyAddressBookSubscriptionsListOrWhitelist(toaddress):
payload += encodeVarint(
shared.networkDefaultProofOfWorkNonceTrialsPerByte)
payload += encodeVarint(
shared.networkDefaultPayloadLengthExtraBytes)
else:
payload += encodeVarint(shared.config.getint(
fromaddress, 'noncetrialsperbyte'))
payload += encodeVarint(shared.config.getint(
fromaddress, 'payloadlengthextrabytes'))
payload += toHash # This hash will be checked by the receiver of the message to verify that toHash belongs to them. This prevents a Surreptitious Forwarding Attack.
payload += '\x02' # Type 2 is simple UTF-8 message encoding as specified on the Protocol Specification on the Bitmessage Wiki.
messageToTransmit = 'Subject:' + \
subject + '\n' + 'Body:' + message
payload += encodeVarint(len(messageToTransmit))
payload += messageToTransmit
fullAckPayload = self.generateFullAckMessage(
ackdata, toStreamNumber, embeddedTime) # The fullAckPayload is a normal msg protocol message with the proof of work already completed that the receiver of this message can easily send out.
payload += encodeVarint(len(fullAckPayload))
payload += fullAckPayload
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# We have assembled the data that will be encrypted.
try:
encrypted = highlevelcrypto.encrypt(payload,"04"+pubEncryptionKeyBase256.encode('hex'))
except:
shared.sqlLock.acquire()
t = (ackdata,)
shared.sqlSubmitQueue.put('''UPDATE sent SET status='badkey' WHERE ackdata=?''')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,tr.translateText("MainWindow",'Problem: The recipient\'s encryption key is no good. Could not encrypt message. %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
continue
encryptedPayload = embeddedTime + encodeVarint(toStreamNumber) + encrypted
target = 2**64 / ((len(encryptedPayload)+requiredPayloadLengthExtraBytes+8) * requiredAverageProofOfWorkNonceTrialsPerByte)
with shared.printLock:
print '(For msg message) Doing proof of work. Total required difficulty:', float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte, 'Required small message difficulty:', float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes
powStartTime = time.time()
initialHash = hashlib.sha512(encryptedPayload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
with shared.printLock:
print '(For msg message) Found proof of work', trialValue, 'Nonce:', nonce
try:
print 'POW took', int(time.time() - powStartTime), 'seconds.', nonce / (time.time() - powStartTime), 'nonce trials per second.'
except:
pass
encryptedPayload = pack('>Q', nonce) + encryptedPayload
inventoryHash = calculateInventoryHash(encryptedPayload)
objectType = 'msg'
shared.inventory[inventoryHash] = (
objectType, toStreamNumber, encryptedPayload, int(time.time()))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Message sent. Waiting on acknowledgement. Sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
print 'Broadcasting inv for my msg(within sendmsg function):', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
# Update the status of the message in the 'sent' table to have a
# 'msgsent' status
shared.sqlLock.acquire()
t = (ackdata,)
shared.sqlSubmitQueue.put('''UPDATE sent SET status='msgsent' WHERE ackdata=?''')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
def sendBroadcast(self):
shared.sqlLock.acquire()
t = ('broadcastqueued',)
shared.sqlSubmitQueue.put(
'''SELECT fromaddress, subject, message, ackdata FROM sent WHERE status=? and folder='sent' ''')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlLock.release()
for row in queryreturn:
fromaddress, subject, body, ackdata = row
status, addressVersionNumber, streamNumber, ripe = decodeAddress(
fromaddress)
"""if addressVersionNumber == 2 and int(time.time()) < shared.encryptedBroadcastSwitchoverTime:
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex') # At this time these pubkeys are 65 bytes long because they include the encoding byte which we won't be sending in the broadcast message.
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload = pack('>Q', (int(time.time()) + random.randrange(
-300, 300))) # the current time plus or minus five minutes
payload += encodeVarint(1) # broadcast version
payload += encodeVarint(addressVersionNumber)
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # behavior bitfield
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
payload += ripe
payload += '\x02' # message encoding type
payload += encodeVarint(len(
'Subject:' + subject + '\n' + 'Body:' + body)) # Type 2 is simple UTF-8 message encoding.
payload += 'Subject:' + subject + '\n' + 'Body:' + body
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
target = 2 ** 64 / ((len(
payload) + shared.networkDefaultPayloadLengthExtraBytes + 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For broadcast message) Doing proof of work...'
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Doing work necessary to send broadcast..."))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For broadcast message) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 'broadcast'
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, int(time.time()))
print 'Broadcasting inv for my broadcast (within sendBroadcast function):', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Broadcast sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
# Update the status of the message in the 'sent' table to have
# a 'broadcastsent' status
shared.sqlLock.acquire()
t = ('broadcastsent', int(
time.time()), fromaddress, subject, body, 'broadcastqueued')
shared.sqlSubmitQueue.put(
'UPDATE sent SET status=?, lastactiontime=? WHERE fromaddress=? AND subject=? AND message=? AND status=?')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()"""
if addressVersionNumber == 2 or addressVersionNumber == 3:
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex') # At this time these pubkeys are 65 bytes long because they include the encoding byte which we won't be sending in the broadcast message.
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload = pack('>Q', (int(time.time()) + random.randrange(
-300, 300))) # the current time plus or minus five minutes
payload += encodeVarint(2) # broadcast version
payload += encodeVarint(streamNumber)
dataToEncrypt = encodeVarint(2) # broadcast version
dataToEncrypt += encodeVarint(addressVersionNumber)
dataToEncrypt += encodeVarint(streamNumber)
dataToEncrypt += '\x00\x00\x00\x01' # behavior bitfield
dataToEncrypt += pubSigningKey[1:]
dataToEncrypt += pubEncryptionKey[1:]
if addressVersionNumber >= 3:
dataToEncrypt += encodeVarint(shared.config.getint(fromaddress,'noncetrialsperbyte'))
dataToEncrypt += encodeVarint(shared.config.getint(fromaddress,'payloadlengthextrabytes'))
dataToEncrypt += '\x02' # message encoding type
dataToEncrypt += encodeVarint(len('Subject:' + subject + '\n' + 'Body:' + body)) #Type 2 is simple UTF-8 message encoding per the documentation on the wiki.
dataToEncrypt += 'Subject:' + subject + '\n' + 'Body:' + body
signature = highlevelcrypto.sign(
dataToEncrypt, privSigningKeyHex)
dataToEncrypt += encodeVarint(len(signature))
dataToEncrypt += signature
# Encrypt the broadcast with the information contained in the broadcaster's address. Anyone who knows the address can generate
# the private encryption key to decrypt the broadcast. This provides virtually no privacy; its purpose is to keep questionable
# and illegal content from flowing through the Internet connections and being stored on the disk of 3rd parties.
privEncryptionKey = hashlib.sha512(encodeVarint(
addressVersionNumber) + encodeVarint(streamNumber) + ripe).digest()[:32]
pubEncryptionKey = pointMult(privEncryptionKey)
payload += highlevelcrypto.encrypt(
dataToEncrypt, pubEncryptionKey.encode('hex'))
target = 2 ** 64 / ((len(
payload) + shared.networkDefaultPayloadLengthExtraBytes + 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For broadcast message) Doing proof of work...'
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Doing work necessary to send broadcast..."))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For broadcast message) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 'broadcast'
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, int(time.time()))
print 'sending inv (within sendBroadcast function)'
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Broadcast sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
# Update the status of the message in the 'sent' table to have
# a 'broadcastsent' status
shared.sqlLock.acquire()
t = ('broadcastsent', int(
time.time()), fromaddress, subject, body, 'broadcastqueued')
shared.sqlSubmitQueue.put(
'UPDATE sent SET status=?, lastactiontime=? WHERE fromaddress=? AND subject=? AND message=? AND status=?')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
else:
with shared.printLock:
sys.stderr.write(
'Error: In the singleWorker thread, the sendBroadcast function doesn\'t understand the address version.\n')
def doPOWForMyV3Pubkey(self, hash): # This function also broadcasts out the pubkey message once it is done with the POW
myAddress = shared.myAddressesByHash[hash]
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
embeddedTime = int(time.time() + random.randrange(
-300, 300)) # the current time plus or minus five minutes
payload = pack('>I', (embeddedTime))
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
with shared.printLock:
sys.stderr.write(
'Error within doPOWForMyV3Pubkey. Could not read the keys from the keys.dat file for a requested address. %s\n' % err)
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
payload += encodeVarint(shared.config.getint(
myAddress, 'noncetrialsperbyte'))
payload += encodeVarint(shared.config.getint(
myAddress, 'payloadlengthextrabytes'))
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# Do the POW for this pubkey message
target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For pubkey message) Doing proof of work...'
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
"""t = (hash,payload,embeddedTime,'no')
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put('''INSERT INTO pubkeys VALUES (?,?,?,?)''')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()"""
inventoryHash = calculateInventoryHash(payload)
objectType = 'pubkey'
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime)
with shared.printLock:
print 'broadcasting inv with hash:', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateStatusBar', ''))
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
def doPOWForMyV2Pubkey(self, hash): # This function also broadcasts out the pubkey message once it is done with the POW
# Look up my stream number based on my address hash
"""configSections = shared.config.sections()
for addressInKeysFile in configSections:
if addressInKeysFile <> 'bitmessagesettings':
status,addressVersionNumber,streamNumber,hashFromThisParticularAddress = decodeAddress(addressInKeysFile)
if hash == hashFromThisParticularAddress:
myAddress = addressInKeysFile
break"""
myAddress = shared.myAddressesByHash[hash]
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(-300, 300))# 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
# Do the POW for this pubkey message
target = 2 ** 64 / (shared.networkDefaultProofOfWorkNonceTrialsPerByte*(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes + ((TTL*(len(payload)+8+shared.networkDefaultPayloadLengthExtraBytes))/(2 ** 16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime,'')
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues((
streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
shared.writeKeysFile()
except:
# The user deleted the address out of the keys.dat file before this
# finished.
pass
def processMessageWithPOWStatus(self):
ret = sqlQuery(
'''SELECT toaddress, fromaddress, subject, message, ackdata, status, ttl, retrynumber FROM sent WHERE (status='doingmsgpow' or status='forcepow') and folder='sent' ''')
for row in ret:
# Decode data from query
toaddress, fromaddress, subject, message, ackdata, status, TTL, retryNumber = row
toStatus, toAddressVersionNumber, toStreamNumber, toRipe = decodeAddress(toaddress)
fromStatus, fromAddressVersionNumber, fromStreamNumber, fromRipe = decodeAddress(fromaddress)
# Set TTL
if retryNumber == 0:
if TTL > 28 * 24 * 60 * 60:
TTL = 28 * 24 * 60 * 60
else:
TTL = 28 * 24 * 60 * 60
TTL = int(TTL + random.randrange(-300, 300))# add some randomness to the TTL
embeddedTime = int(time.time() + TTL)
# Get pubkey
if not shared.config.has_section(toaddress): # if we aren't sending this to ourselves or a chan
shared.ackdataForWhichImWatching[ackdata] = 0
# Let us fetch the recipient's public key out of our database. If
# the required proof of work difficulty is too hard then we'll
# abort.
pubkeyPayload = shared.hadPubkeys[toaddress][2]
# The pubkey message is stored with the following items all appended:
# -address version
# -stream number
# -behavior bitfield
# -pub signing key
# -pub encryption key
# -nonce trials per byte (if address version is >= 3)
# -length extra bytes (if address version is >= 3)
readPosition = 1 # to bypass the address version whose length is definitely 1
streamNumber, streamNumberLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += streamNumberLength
behaviorBitfield = pubkeyPayload[readPosition:readPosition + 4]
# Mobile users may ask us to include their address's RIPE hash on a message
# unencrypted. Before we actually do it the sending human must check a box
# in the settings menu to allow it.
if shared.isBitSetWithinBitfield(behaviorBitfield,30): # if receiver is a mobile device who expects that their address RIPE is included unencrypted on the front of the message..
if not shared.safeConfigGetBoolean('bitmessagesettings','willinglysendtomobile'): # if we are Not willing to include the receiver's RIPE hash on the message..
# if the human changes their setting and then sends another message or restarts their client, this one will send at that time.
continue
readPosition += 4 # to bypass the bitfield of behaviors
# pubSigningKeyBase256 = pubkeyPayload[readPosition:readPosition+64] # We don't use this key for anything here.
readPosition += 64
pubEncryptionKeyBase256 = pubkeyPayload[readPosition:readPosition + 64]
readPosition += 64
# Let us fetch the amount of work required by the recipient.
if toAddressVersionNumber == 2:
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
elif toAddressVersionNumber >= 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
if requiredAverageProofOfWorkNonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte: # We still have to meet a minimum POW difficulty regardless of what they say is allowed in order to get our message to propagate through the network.
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
if status != 'forcepow':
if (requiredAverageProofOfWorkNonceTrialsPerByte > shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') and shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') != 0) or (requiredPayloadLengthExtraBytes > shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') and shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') != 0):
# The demanded difficulty is more than we are willing
# to do.
sqlExecute(
'''UPDATE sent SET status='toodifficult' WHERE ackdata=? ''',
ackdata)
continue
else: # if we are sending a message to ourselves or a chan..
behaviorBitfield = '\x00\x00\x00\x01'
try:
privEncryptionKeyBase58 = shared.config.get(
toaddress, 'privencryptionkey')
except Exception as err:
continue
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubEncryptionKeyBase256 = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')[1:]
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
# Now we can start to assemble our message.
payload = encodeVarint(fromAddressVersionNumber)
payload += encodeVarint(fromStreamNumber)
payload += '\x00\x00\x00\x01' # Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features )
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[
1:] # The \x04 on the beginning of the public keys are not sent. This way there is only one acceptable way to encode and send a public key.
payload += pubEncryptionKey[1:]
if fromAddressVersionNumber >= 3:
# If the receiver of our message is in our address book,
# subscriptions list, or whitelist then we will allow them to
# do the network-minimum proof of work. Let us check to see if
# the receiver is in any of those lists.
payload += encodeVarint(shared.config.getint(
fromaddress, 'noncetrialsperbyte'))
payload += encodeVarint(shared.config.getint(
fromaddress, 'payloadlengthextrabytes'))
payload += toRipe # This hash will be checked by the receiver of the message to verify that toRipe belongs to them. This prevents a Surreptitious Forwarding Attack.
payload += '\x02' # Type 2 is simple UTF-8 message encoding as specified on the Protocol Specification on the Bitmessage Wiki.
messageToTransmit = 'Subject:' + subject + '\n'
messageToTransmit+= 'Body:' + message
payload += encodeVarint(len(messageToTransmit))
payload += messageToTransmit
if shared.config.has_section(toaddress):
fullAckPayload = ''
elif not shared.isBitSetWithinBitfield(behaviorBitfield,31):
fullAckPayload = ''
else:
fullAckPayload = self.generateFullAckMessage(
ackdata, toStreamNumber, TTL) # The fullAckPayload is a normal msg protocol message with the proof of work already completed that the receiver of this message can easily send out.
payload += encodeVarint(len(fullAckPayload))
payload += fullAckPayload
dataToSign = pack('>Q', embeddedTime) + '\x00\x00\x00\x02' + encodeVarint(1) + encodeVarint(toStreamNumber) + payload
signature = highlevelcrypto.sign(dataToSign, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# We have assembled the data that will be encrypted.
try:
encrypted = highlevelcrypto.encrypt(payload,"04"+pubEncryptionKeyBase256.encode('hex'))
except:
sqlExecute('''UPDATE sent SET status='badkey' WHERE ackdata=?''', ackdata)
continue
encryptedPayload = pack('>Q', embeddedTime)
encryptedPayload += '\x00\x00\x00\x02' # object type: msg
encryptedPayload += encodeVarint(1) # msg version
encryptedPayload += encodeVarint(toStreamNumber) + encrypted
target = 2 ** 64 / (requiredAverageProofOfWorkNonceTrialsPerByte*(len(encryptedPayload) + 8 + requiredPayloadLengthExtraBytes + ((TTL*(len(encryptedPayload)+8+requiredPayloadLengthExtraBytes))/(2 ** 16))))
powStartTime = time.time()
initialHash = hashlib.sha512(encryptedPayload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
encryptedPayload = pack('>Q', nonce) + encryptedPayload
# Sanity check. The encryptedPayload size should never be larger than 256 KiB. There should
# be checks elsewhere in the code to not let the user try to send a message this large
# until we implement message continuation.
if len(encryptedPayload) > 2 ** 18: # 256 KiB
print "The payload is lager than 256KiB,So the loop will continue"
continue
inventoryHash = calculateInventoryHash(encryptedPayload)
objectType = 2
shared.inventory[inventoryHash] = (
objectType, toStreamNumber, encryptedPayload, embeddedTime, '')
shared.inventorySets[toStreamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues((
toStreamNumber, 'advertiseobject', inventoryHash))
# Update the sent message in the sent table with the necessary information.
if shared.config.has_section(toaddress):
newStatus = 'msgsentnoackexpected'
else:
newStatus = 'msgsent'
if retryNumber == 0:
sleepTill = int(time.time()) + TTL
else:
sleepTill = int(time.time()) + 28*24*60*60 * 2**retryNumber
sqlExecute('''UPDATE sent SET msgid=?, status=?, retrynumber=?, sleeptill=?, lastactiontime=? WHERE ackdata=?''',
inventoryHash,
newStatus,
retryNumber+1,
sleepTill,
int(time.time()),
ackdata)
# If we are sending to ourselves or a chan, let's put the message in our own inbox.
if shared.config.has_section(toaddress):
sigHash = hashlib.sha512(hashlib.sha512(signature).digest()).digest()[32:] # Used to detect and ignore duplicate messages in our inbox
t = (inventoryHash, toaddress, fromaddress, subject, int(
time.time()), message, 'inbox', 2, 0, sigHash)
shared.messages.append(t)
def get_pubkey_for(address, decodedAddress=None):
"""
Retrieve public key for an address.
Provide the decodedAddress if you already have it. No need to decode it more than once.
Returns None if pubkey not found, otherwise the following tuple:
( pubEncryptionKey, pubSigningKey, requiredAvgPOWNonceTrialsPerByte,
requiredPayloadLengthExtraBytes, behaviourBitfield )
The keys returned are in binary format.
"""
# Can return None, "mobile-user-disallowed", or
# ( pubEncryptionKeyBase256, pubsigningKeyBase256,
# requiredAverageProofOfWorkNonceTrialsPerByte,
# requiredPayloadLengthExtraBytes,
# behaviourBitfield )
if decodedAddress is None:
decodedAddress = shared.decodeAddress( address )
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
# If we need the public key for our own address or a chan,
# we can compute it from the private key
if shared.config.has_section( address ):
try:
privSigningKeyBase58 = shared.config.get(
address, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
address, 'privencryptionkey')
except:
debug.logger.error( tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file." ) )
return None
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')[1:]
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')[1:]
return ( pubEncryptionKey, pubSigningKey,
requiredAverageProofOfWorkNonceTrialsPerByte,
requiredPayloadLengthExtraBytes,
"\x00\x00\x00\x01" )
# This is not an address where we know the private key.
# See if we already have the public key in our database:
_, addressVersion, streamNumber, ripe = decodedAddress
queryReturn = sqlQuery( "SELECT transmitdata FROM pubkeys WHERE hash=? AND addressversion=?", ripe, addressVersion)
if queryReturn != []:
pubkeyPayload = queryReturn[0][0]
return decode_pubkey_payload( pubkeyPayload, addressVersion )
# The pubkey message is stored the way we originally received it
# which means that we need to read beyond things like the nonce and
# time to get to the actual public keys.
# We don't have the public key in our database.
return None
def processMessageWithPOWStatus(self):
ret = sqlQuery(
'''SELECT toaddress, fromaddress, subject, message, ackdata, status, ttl, retrynumber FROM sent WHERE (status='doingmsgpow' or status='forcepow') and folder='sent' '''
)
for row in ret:
# Decode data from query
toaddress, fromaddress, subject, message, ackdata, status, TTL, retryNumber = row
toStatus, toAddressVersionNumber, toStreamNumber, toRipe = decodeAddress(
toaddress)
fromStatus, fromAddressVersionNumber, fromStreamNumber, fromRipe = decodeAddress(
fromaddress)
# Set TTL
if retryNumber == 0:
if TTL > 28 * 24 * 60 * 60:
TTL = 28 * 24 * 60 * 60
else:
TTL = 28 * 24 * 60 * 60
TTL = int(
TTL +
random.randrange(-300, 300)) # add some randomness to the TTL
embeddedTime = int(time.time() + TTL)
# Get pubkey
if not shared.config.has_section(
toaddress
): # if we aren't sending this to ourselves or a chan
shared.ackdataForWhichImWatching[ackdata] = 0
# Let us fetch the recipient's public key out of our database. If
# the required proof of work difficulty is too hard then we'll
# abort.
pubkeyPayload = shared.hadPubkeys[toaddress][2]
# The pubkey message is stored with the following items all appended:
# -address version
# -stream number
# -behavior bitfield
# -pub signing key
# -pub encryption key
# -nonce trials per byte (if address version is >= 3)
# -length extra bytes (if address version is >= 3)
readPosition = 1 # to bypass the address version whose length is definitely 1
streamNumber, streamNumberLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += streamNumberLength
behaviorBitfield = pubkeyPayload[readPosition:readPosition + 4]
# Mobile users may ask us to include their address's RIPE hash on a message
# unencrypted. Before we actually do it the sending human must check a box
# in the settings menu to allow it.
if shared.isBitSetWithinBitfield(
behaviorBitfield, 30
): # if receiver is a mobile device who expects that their address RIPE is included unencrypted on the front of the message..
if not shared.safeConfigGetBoolean(
'bitmessagesettings', 'willinglysendtomobile'
): # if we are Not willing to include the receiver's RIPE hash on the message..
# if the human changes their setting and then sends another message or restarts their client, this one will send at that time.
continue
readPosition += 4 # to bypass the bitfield of behaviors
# pubSigningKeyBase256 = pubkeyPayload[readPosition:readPosition+64] # We don't use this key for anything here.
readPosition += 64
pubEncryptionKeyBase256 = pubkeyPayload[
readPosition:readPosition + 64]
readPosition += 64
# Let us fetch the amount of work required by the recipient.
if toAddressVersionNumber == 2:
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
elif toAddressVersionNumber >= 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
if requiredAverageProofOfWorkNonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte: # We still have to meet a minimum POW difficulty regardless of what they say is allowed in order to get our message to propagate through the network.
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
if status != 'forcepow':
if (requiredAverageProofOfWorkNonceTrialsPerByte >
shared.config.getint(
'bitmessagesettings',
'maxacceptablenoncetrialsperbyte')
and shared.config.getint(
'bitmessagesettings',
'maxacceptablenoncetrialsperbyte') != 0
) or (requiredPayloadLengthExtraBytes >
shared.config.getint(
'bitmessagesettings',
'maxacceptablepayloadlengthextrabytes')
and shared.config.getint(
'bitmessagesettings',
'maxacceptablepayloadlengthextrabytes')
!= 0):
# The demanded difficulty is more than we are willing
# to do.
sqlExecute(
'''UPDATE sent SET status='toodifficult' WHERE ackdata=? ''',
ackdata)
continue
else: # if we are sending a message to ourselves or a chan..
behaviorBitfield = '\x00\x00\x00\x01'
try:
privEncryptionKeyBase58 = shared.config.get(
toaddress, 'privencryptionkey')
except Exception as err:
continue
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubEncryptionKeyBase256 = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')[1:]
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
# Now we can start to assemble our message.
payload = encodeVarint(fromAddressVersionNumber)
payload += encodeVarint(fromStreamNumber)
payload += '\x00\x00\x00\x01' # Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features )
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[
1:] # The \x04 on the beginning of the public keys are not sent. This way there is only one acceptable way to encode and send a public key.
payload += pubEncryptionKey[1:]
if fromAddressVersionNumber >= 3:
# If the receiver of our message is in our address book,
# subscriptions list, or whitelist then we will allow them to
# do the network-minimum proof of work. Let us check to see if
# the receiver is in any of those lists.
payload += encodeVarint(
shared.config.getint(fromaddress, 'noncetrialsperbyte'))
payload += encodeVarint(
shared.config.getint(fromaddress,
'payloadlengthextrabytes'))
payload += toRipe # This hash will be checked by the receiver of the message to verify that toRipe belongs to them. This prevents a Surreptitious Forwarding Attack.
payload += '\x02' # Type 2 is simple UTF-8 message encoding as specified on the Protocol Specification on the Bitmessage Wiki.
messageToTransmit = 'Subject:' + subject + '\n'
messageToTransmit += 'Body:' + message
payload += encodeVarint(len(messageToTransmit))
payload += messageToTransmit
if shared.config.has_section(toaddress):
fullAckPayload = ''
elif not shared.isBitSetWithinBitfield(behaviorBitfield, 31):
fullAckPayload = ''
else:
fullAckPayload = self.generateFullAckMessage(
ackdata, toStreamNumber, TTL
) # The fullAckPayload is a normal msg protocol message with the proof of work already completed that the receiver of this message can easily send out.
payload += encodeVarint(len(fullAckPayload))
payload += fullAckPayload
dataToSign = pack(
'>Q', embeddedTime) + '\x00\x00\x00\x02' + encodeVarint(
1) + encodeVarint(toStreamNumber) + payload
signature = highlevelcrypto.sign(dataToSign, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# We have assembled the data that will be encrypted.
try:
encrypted = highlevelcrypto.encrypt(
payload, "04" + pubEncryptionKeyBase256.encode('hex'))
except:
sqlExecute(
'''UPDATE sent SET status='badkey' WHERE ackdata=?''',
ackdata)
continue
encryptedPayload = pack('>Q', embeddedTime)
encryptedPayload += '\x00\x00\x00\x02' # object type: msg
encryptedPayload += encodeVarint(1) # msg version
encryptedPayload += encodeVarint(toStreamNumber) + encrypted
target = 2**64 / (
requiredAverageProofOfWorkNonceTrialsPerByte *
(len(encryptedPayload) + 8 + requiredPayloadLengthExtraBytes +
((TTL * (len(encryptedPayload) + 8 +
requiredPayloadLengthExtraBytes)) / (2**16))))
powStartTime = time.time()
initialHash = hashlib.sha512(encryptedPayload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
encryptedPayload = pack('>Q', nonce) + encryptedPayload
# Sanity check. The encryptedPayload size should never be larger than 256 KiB. There should
# be checks elsewhere in the code to not let the user try to send a message this large
# until we implement message continuation.
if len(encryptedPayload) > 2**18: # 256 KiB
print "The payload is lager than 256KiB,So the loop will continue"
continue
inventoryHash = calculateInventoryHash(encryptedPayload)
objectType = 2
shared.inventory[inventoryHash] = (objectType, toStreamNumber,
encryptedPayload, embeddedTime,
'')
shared.inventorySets[toStreamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues(
(toStreamNumber, 'advertiseobject', inventoryHash))
# Update the sent message in the sent table with the necessary information.
if shared.config.has_section(toaddress):
newStatus = 'msgsentnoackexpected'
else:
newStatus = 'msgsent'
if retryNumber == 0:
sleepTill = int(time.time()) + TTL
else:
sleepTill = int(
time.time()) + 28 * 24 * 60 * 60 * 2**retryNumber
sqlExecute(
'''UPDATE sent SET msgid=?, status=?, retrynumber=?, sleeptill=?, lastactiontime=? WHERE ackdata=?''',
inventoryHash, newStatus, retryNumber + 1, sleepTill,
int(time.time()), ackdata)
# If we are sending to ourselves or a chan, let's put the message in our own inbox.
if shared.config.has_section(toaddress):
sigHash = hashlib.sha512(hashlib.sha512(signature).digest(
)).digest(
)[32:] # Used to detect and ignore duplicate messages in our inbox
t = (inventoryHash, toaddress, fromaddress, subject,
int(time.time()), message, 'inbox', 2, 0, sigHash)
shared.messages.append(t)
def get_pubkey_for(address, decodedAddress=None):
"""
Retrieve public key for an address.
Provide the decodedAddress if you already have it. No need to decode it more than once.
Returns None if pubkey not found, otherwise the following tuple:
( pubEncryptionKey, pubSigningKey, requiredAvgPOWNonceTrialsPerByte,
requiredPayloadLengthExtraBytes, behaviourBitfield )
The keys returned are in binary format.
"""
# Can return None, "mobile-user-disallowed", or
# ( pubEncryptionKeyBase256, pubsigningKeyBase256,
# requiredAverageProofOfWorkNonceTrialsPerByte,
# requiredPayloadLengthExtraBytes,
# behaviourBitfield )
if decodedAddress is None:
decodedAddress = shared.decodeAddress(address)
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
# If we need the public key for our own address or a chan,
# we can compute it from the private key
if shared.config.has_section(address):
try:
privSigningKeyBase58 = shared.config.get(address, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
address, 'privencryptionkey')
except:
debug.logger.error(
tr.translateText(
"MainWindow",
"Error! Could not find sender address (your address) in the keys.dat file."
))
return None
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex')[1:]
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')[1:]
return (pubEncryptionKey, pubSigningKey,
requiredAverageProofOfWorkNonceTrialsPerByte,
requiredPayloadLengthExtraBytes, "\x00\x00\x00\x01")
# This is not an address where we know the private key.
# See if we already have the public key in our database:
_, addressVersion, streamNumber, ripe = decodedAddress
queryReturn = sqlQuery(
"SELECT transmitdata FROM pubkeys WHERE hash=? AND addressversion=?",
ripe, addressVersion)
if queryReturn != []:
pubkeyPayload = queryReturn[0][0]
return decode_pubkey_payload(pubkeyPayload, addressVersion)
# The pubkey message is stored the way we originally received it
# which means that we need to read beyond things like the nonce and
# time to get to the actual public keys.
# We don't have the public key in our database.
return None
def doPOWForMyV2Pubkey(self, hash): # This function also broadcasts out the pubkey message once it is done with the POW
# Look up my stream number based on my address hash
"""configSections = shared.config.sections()
for addressInKeysFile in configSections:
if addressInKeysFile <> 'bitmessagesettings':
status,addressVersionNumber,streamNumber,hashFromThisParticularAddress = decodeAddress(addressInKeysFile)
if hash == hashFromThisParticularAddress:
myAddress = addressInKeysFile
break"""
myAddress = shared.myAddressesByHash[hash]
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
embeddedTime = int(time.time() + random.randrange(
-300, 300)) # the current time plus or minus five minutes
payload = pack('>I', (embeddedTime))
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
with shared.printLock:
sys.stderr.write(
'Error within doPOWForMyV2Pubkey. Could not read the keys from the keys.dat file for a requested address. %s\n' % err)
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
# Do the POW for this pubkey message
target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For pubkey message) Doing proof of work...'
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
"""t = (hash,payload,embeddedTime,'no')
shared.sqlLock.acquire()
shared.sqlSubmitQueue.put('''INSERT INTO pubkeys VALUES (?,?,?,?)''')
shared.sqlSubmitQueue.put(t)
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()"""
inventoryHash = calculateInventoryHash(payload)
objectType = 'pubkey'
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime)
with shared.printLock:
print 'broadcasting inv with hash:', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateStatusBar', ''))
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
def sendMsg(self):
# Check to see if there are any messages queued to be sent
queryreturn = sqlQuery(
'''SELECT DISTINCT toaddress FROM sent WHERE (status='msgqueued' AND folder='sent')''')
for row in queryreturn: # For each address to which we need to send a message, check to see if we have its pubkey already.
toaddress, = row
toripe = decodeAddress(toaddress)[3]
queryreturn = sqlQuery(
'''SELECT hash FROM pubkeys WHERE hash=? ''', toripe)
if queryreturn != []: # If we have the needed pubkey, set the status to doingmsgpow (we'll do it further down)
sqlExecute(
'''UPDATE sent SET status='doingmsgpow' WHERE toaddress=? AND status='msgqueued' ''',
toaddress)
else: # We don't have the needed pubkey. Set the status to 'awaitingpubkey' and request it if we haven't already
if toripe in shared.neededPubkeys:
# We already sent a request for the pubkey
sqlExecute(
'''UPDATE sent SET status='awaitingpubkey' WHERE toaddress=? AND status='msgqueued' ''', toaddress)
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, tr.translateText("MainWindow",'Encryption key was requested earlier.'))))
else:
# We have not yet sent a request for the pubkey
sqlExecute(
'''UPDATE sent SET status='doingpubkeypow' WHERE toaddress=? AND status='msgqueued' ''',
toaddress)
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, tr.translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
self.requestPubKey(toaddress)
# Get all messages that are ready to be sent, and also all messages
# which we have sent in the last 28 days which were previously marked
# as 'toodifficult'. If the user as raised the maximum acceptable
# difficulty then those messages may now be sendable.
queryreturn = sqlQuery(
'''SELECT toaddress, toripe, fromaddress, subject, message, ackdata, status FROM sent WHERE (status='doingmsgpow' or status='forcepow' or (status='toodifficult' and lastactiontime>?)) and folder='sent' ''',
int(time.time()) - 2419200)
for row in queryreturn: # For each message we need to send..
toaddress, toripe, fromaddress, subject, message, ackdata, status = row
# There is a remote possibility that we may no longer have the
# recipient's pubkey. Let us make sure we still have it or else the
# sendMsg function will appear to freeze. This can happen if the
# user sends a message but doesn't let the POW function finish,
# then leaves their client off for a long time which could cause
# the needed pubkey to expire and be deleted.
queryreturn = sqlQuery(
'''SELECT hash FROM pubkeys WHERE hash=? ''',
toripe)
if queryreturn == [] and toripe not in shared.neededPubkeys:
# We no longer have the needed pubkey and we haven't requested
# it.
with shared.printLock:
sys.stderr.write(
'For some reason, the status of a message in our outbox is \'doingmsgpow\' even though we lack the pubkey. Here is the RIPE hash of the needed pubkey: %s\n' % toripe.encode('hex'))
sqlExecute(
'''UPDATE sent SET status='msgqueued' WHERE toaddress=? AND status='doingmsgpow' ''', toaddress)
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, tr.translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
self.requestPubKey(toaddress)
continue
shared.ackdataForWhichImWatching[ackdata] = 0
toStatus, toAddressVersionNumber, toStreamNumber, toHash = decodeAddress(
toaddress)
fromStatus, fromAddressVersionNumber, fromStreamNumber, fromHash = decodeAddress(
fromaddress)
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Looking up the receiver\'s public key"))))
with shared.printLock:
print 'Found a message in our database that needs to be sent with this pubkey.'
print 'First 150 characters of message:', repr(message[:150])
# mark the pubkey as 'usedpersonally' so that we don't ever delete
# it.
sqlExecute(
'''UPDATE pubkeys SET usedpersonally='yes' WHERE hash=?''',
toripe)
# Let us fetch the recipient's public key out of our database. If
# the required proof of work difficulty is too hard then we'll
# abort.
queryreturn = sqlQuery(
'SELECT transmitdata FROM pubkeys WHERE hash=?',
toripe)
if queryreturn == []:
with shared.printLock:
sys.stderr.write(
'(within sendMsg) The needed pubkey was not found. This should never happen. Aborting send.\n')
return
for row in queryreturn:
pubkeyPayload, = row
# The pubkey message is stored the way we originally received it
# which means that we need to read beyond things like the nonce and
# time to get to the actual public keys.
readPosition = 8 # to bypass the nonce
pubkeyEmbeddedTime, = unpack(
'>I', pubkeyPayload[readPosition:readPosition + 4])
# This section is used for the transition from 32 bit time to 64
# bit time in the protocol.
if pubkeyEmbeddedTime == 0:
pubkeyEmbeddedTime, = unpack(
'>Q', pubkeyPayload[readPosition:readPosition + 8])
readPosition += 8
else:
readPosition += 4
readPosition += 1 # to bypass the address version whose length is definitely 1
streamNumber, streamNumberLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += streamNumberLength
behaviorBitfield = pubkeyPayload[readPosition:readPosition + 4]
# Mobile users may ask us to include their address's RIPE hash on a message
# unencrypted. Before we actually do it the sending human must check a box
# in the settings menu to allow it.
if shared.isBitSetWithinBitfield(behaviorBitfield,30): # if receiver is a mobile device who expects that their address RIPE is included unencrypted on the front of the message..
if not shared.safeConfigGetBoolean('bitmessagesettings','willinglysendtomobile'): # if we are Not willing to include the receiver's RIPE hash on the message..
logger.info('The receiver is a mobile user but the sender (you) has not selected that you are willing to send to mobiles. Aborting send.')
shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,tr.translateText("MainWindow",'Problem: Destination is a mobile device who requests that the destination be included in the message but this is disallowed in your settings. %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
# if the human changes their setting and then sends another message or restarts their client, this one will send at that time.
continue
readPosition += 4 # to bypass the bitfield of behaviors
# pubSigningKeyBase256 =
# pubkeyPayload[readPosition:readPosition+64] #We don't use this
# key for anything here.
readPosition += 64
pubEncryptionKeyBase256 = pubkeyPayload[
readPosition:readPosition + 64]
readPosition += 64
# Let us fetch the amount of work required by the recipient.
if toAddressVersionNumber == 2:
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nThere is no required difficulty for version 2 addresses like this."))))
elif toAddressVersionNumber == 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
readPosition += varintLength
if requiredAverageProofOfWorkNonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte: # We still have to meet a minimum POW difficulty regardless of what they say is allowed in order to get our message to propagate through the network.
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nReceiver\'s required difficulty: %1 and %2").arg(str(float(
requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)))))
if status != 'forcepow':
if (requiredAverageProofOfWorkNonceTrialsPerByte > shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') and shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') != 0) or (requiredPayloadLengthExtraBytes > shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') and shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') != 0):
# The demanded difficulty is more than we are willing
# to do.
sqlExecute(
'''UPDATE sent SET status='toodifficult' WHERE ackdata=? ''',
ackdata)
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do.").arg(str(float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(
requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)).arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
continue
embeddedTime = pack('>Q', (int(time.time()) + random.randrange(
-300, 300))) # the current time plus or minus five minutes. We will use this time both for our message and for the ackdata packed within our message.
if fromAddressVersionNumber == 2:
payload = '\x01' # Message version.
payload += encodeVarint(fromAddressVersionNumber)
payload += encodeVarint(fromStreamNumber)
payload += '\x00\x00\x00\x01' # Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features )
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[
1:] # The \x04 on the beginning of the public keys are not sent. This way there is only one acceptable way to encode and send a public key.
payload += pubEncryptionKey[1:]
payload += toHash # This hash will be checked by the receiver of the message to verify that toHash belongs to them. This prevents a Surreptitious Forwarding Attack.
payload += '\x02' # Type 2 is simple UTF-8 message encoding as specified on the Protocol Specification on the Bitmessage Wiki.
messageToTransmit = 'Subject:' + \
subject + '\n' + 'Body:' + message
payload += encodeVarint(len(messageToTransmit))
payload += messageToTransmit
fullAckPayload = self.generateFullAckMessage(
ackdata, toStreamNumber, embeddedTime) # The fullAckPayload is a normal msg protocol message with the proof of work already completed that the receiver of this message can easily send out.
payload += encodeVarint(len(fullAckPayload))
payload += fullAckPayload
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
if fromAddressVersionNumber == 3:
payload = '\x01' # Message version.
payload += encodeVarint(fromAddressVersionNumber)
payload += encodeVarint(fromStreamNumber)
payload += '\x00\x00\x00\x01' # Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features )
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[
1:] # The \x04 on the beginning of the public keys are not sent. This way there is only one acceptable way to encode and send a public key.
payload += pubEncryptionKey[1:]
# If the receiver of our message is in our address book,
# subscriptions list, or whitelist then we will allow them to
# do the network-minimum proof of work. Let us check to see if
# the receiver is in any of those lists.
if shared.isAddressInMyAddressBookSubscriptionsListOrWhitelist(toaddress):
payload += encodeVarint(
shared.networkDefaultProofOfWorkNonceTrialsPerByte)
payload += encodeVarint(
shared.networkDefaultPayloadLengthExtraBytes)
else:
payload += encodeVarint(shared.config.getint(
fromaddress, 'noncetrialsperbyte'))
payload += encodeVarint(shared.config.getint(
fromaddress, 'payloadlengthextrabytes'))
payload += toHash # This hash will be checked by the receiver of the message to verify that toHash belongs to them. This prevents a Surreptitious Forwarding Attack.
payload += '\x02' # Type 2 is simple UTF-8 message encoding as specified on the Protocol Specification on the Bitmessage Wiki.
messageToTransmit = 'Subject:' + \
subject + '\n' + 'Body:' + message
payload += encodeVarint(len(messageToTransmit))
payload += messageToTransmit
if shared.safeConfigGetBoolean(toaddress, 'chan'):
with shared.printLock:
print 'Not bothering to generate ackdata because we are sending to a chan.'
fullAckPayload = ''
elif not shared.isBitSetWithinBitfield(behaviorBitfield,31):
with shared.printLock:
print 'Not bothering to generate ackdata because the receiver said that they won\'t relay it anyway.'
fullAckPayload = ''
else:
fullAckPayload = self.generateFullAckMessage(
ackdata, toStreamNumber, embeddedTime) # The fullAckPayload is a normal msg protocol message with the proof of work already completed that the receiver of this message can easily send out.
payload += encodeVarint(len(fullAckPayload))
payload += fullAckPayload
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# We have assembled the data that will be encrypted.
try:
encrypted = highlevelcrypto.encrypt(payload,"04"+pubEncryptionKeyBase256.encode('hex'))
except:
sqlExecute('''UPDATE sent SET status='badkey' WHERE ackdata=?''', ackdata)
shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,tr.translateText("MainWindow",'Problem: The recipient\'s encryption key is no good. Could not encrypt message. %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
continue
encryptedPayload = embeddedTime + encodeVarint(toStreamNumber) + encrypted
target = 2**64 / ((len(encryptedPayload)+requiredPayloadLengthExtraBytes+8) * requiredAverageProofOfWorkNonceTrialsPerByte)
with shared.printLock:
print '(For msg message) Doing proof of work. Total required difficulty:', float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte, 'Required small message difficulty:', float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes
powStartTime = time.time()
initialHash = hashlib.sha512(encryptedPayload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
with shared.printLock:
print '(For msg message) Found proof of work', trialValue, 'Nonce:', nonce
try:
print 'POW took', int(time.time() - powStartTime), 'seconds.', nonce / (time.time() - powStartTime), 'nonce trials per second.'
except:
pass
encryptedPayload = pack('>Q', nonce) + encryptedPayload
inventoryHash = calculateInventoryHash(encryptedPayload)
objectType = 'msg'
shared.inventory[inventoryHash] = (
objectType, toStreamNumber, encryptedPayload, int(time.time()))
if shared.safeConfigGetBoolean(toaddress, 'chan'):
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Message sent. Sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
else:
# not sending to a chan
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Message sent. Waiting on acknowledgement. Sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
print 'Broadcasting inv for my msg(within sendmsg function):', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
# Update the status of the message in the 'sent' table to have a
# 'msgsent' status or 'msgsentnoackexpected' status.
if shared.safeConfigGetBoolean(toaddress, 'chan'):
newStatus = 'msgsentnoackexpected'
else:
newStatus = 'msgsent'
sqlExecute('''UPDATE sent SET msgid=?, status=? WHERE ackdata=?''',
inventoryHash,newStatus,ackdata)
def sendBroadcast(self):
queryreturn = sqlQuery(
'''SELECT fromaddress, subject, message, ackdata FROM sent WHERE status=? and folder='sent' ''', 'broadcastqueued')
for row in queryreturn:
fromaddress, subject, body, ackdata = row
status, addressVersionNumber, streamNumber, ripe = decodeAddress(
fromaddress)
if addressVersionNumber <= 1:
with shared.printLock:
sys.stderr.write(
'Error: In the singleWorker thread, the sendBroadcast function doesn\'t understand the address version.\n')
return
# We need to convert our private keys to public keys in order
# to include them.
try:
privSigningKeyBase58 = shared.config.get(
fromaddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex') # At this time these pubkeys are 65 bytes long because they include the encoding byte which we won't be sending in the broadcast message.
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload = pack('>Q', (int(time.time()) + random.randrange(
-300, 300))) # the current time plus or minus five minutes
payload += encodeVarint(2) # broadcast version
payload += encodeVarint(streamNumber)
dataToEncrypt = encodeVarint(2) # broadcast version
dataToEncrypt += encodeVarint(addressVersionNumber)
dataToEncrypt += encodeVarint(streamNumber)
dataToEncrypt += '\x00\x00\x00\x01' # behavior bitfield
dataToEncrypt += pubSigningKey[1:]
dataToEncrypt += pubEncryptionKey[1:]
if addressVersionNumber >= 3:
dataToEncrypt += encodeVarint(shared.config.getint(fromaddress,'noncetrialsperbyte'))
dataToEncrypt += encodeVarint(shared.config.getint(fromaddress,'payloadlengthextrabytes'))
dataToEncrypt += '\x02' # message encoding type
dataToEncrypt += encodeVarint(len('Subject:' + subject + '\n' + 'Body:' + body)) #Type 2 is simple UTF-8 message encoding per the documentation on the wiki.
dataToEncrypt += 'Subject:' + subject + '\n' + 'Body:' + body
signature = highlevelcrypto.sign(
dataToEncrypt, privSigningKeyHex)
dataToEncrypt += encodeVarint(len(signature))
dataToEncrypt += signature
# Encrypt the broadcast with the information contained in the broadcaster's address. Anyone who knows the address can generate
# the private encryption key to decrypt the broadcast. This provides virtually no privacy; its purpose is to keep questionable
# and illegal content from flowing through the Internet connections and being stored on the disk of 3rd parties.
privEncryptionKey = hashlib.sha512(encodeVarint(
addressVersionNumber) + encodeVarint(streamNumber) + ripe).digest()[:32]
pubEncryptionKey = pointMult(privEncryptionKey)
payload += highlevelcrypto.encrypt(
dataToEncrypt, pubEncryptionKey.encode('hex'))
target = 2 ** 64 / ((len(
payload) + shared.networkDefaultPayloadLengthExtraBytes + 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For broadcast message) Doing proof of work...'
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, tr.translateText("MainWindow", "Doing work necessary to send broadcast..."))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For broadcast message) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 'broadcast'
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, int(time.time()))
with shared.printLock:
print 'sending inv (within sendBroadcast function) for object:', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Broadcast sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
# Update the status of the message in the 'sent' table to have
# a 'broadcastsent' status
sqlExecute(
'UPDATE sent SET msgid=?, status=?, lastactiontime=? WHERE ackdata=?',
inventoryHash,
'broadcastsent',
int(time.time()),
ackdata)
def sendOutOrStoreMyV3Pubkey(self, hash):
myAddress = shared.myAddressesByHash[hash]
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
embeddedTime = int(time.time() + random.randrange(
-300, 300)) # the current time plus or minus five minutes
payload = pack('>I', (embeddedTime))
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
with shared.printLock:
sys.stderr.write(
'Error within sendOutOrStoreMyV3Pubkey. Could not read the keys from the keys.dat file for a requested address. %s\n' % err)
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
payload += encodeVarint(shared.config.getint(
myAddress, 'noncetrialsperbyte'))
payload += encodeVarint(shared.config.getint(
myAddress, 'payloadlengthextrabytes'))
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
if not shared.safeConfigGetBoolean(myAddress, 'chan'):
# Do the POW for this pubkey message
target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For pubkey message) Doing proof of work...'
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 'pubkey'
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime)
with shared.printLock:
print 'broadcasting inv with hash:', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateStatusBar', ''))
# If this is a chan address then we won't send out the pubkey over the
# network but rather will only store it in our pubkeys table so that
# we can send messages to "ourselves".
if shared.safeConfigGetBoolean(myAddress, 'chan'):
payload = '\x00' * 8 + payload # Attach a fake nonce on the front
# just so that it is in the correct format.
sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''',
hash,
payload,
embeddedTime,
'yes')
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
def sendOutOrStoreMyV3Pubkey(self, hash):
try:
myAddress = shared.myAddressesByHash[hash]
except:
#The address has been deleted.
return
if shared.safeConfigGetBoolean(myAddress, 'chan'):
return
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(
-300, 300)) # 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
signedTimeForProtocolV2 = embeddedTime - TTL
"""
According to the protocol specification, the expiresTime along with the pubkey information is
signed. But to be backwards compatible during the upgrade period, we shall sign not the
expiresTime but rather the current time. There must be precisely a 28 day difference
between the two. After the upgrade period we'll switch to signing the whole payload with the
expiresTime time.
"""
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(myAddress,
'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
payload += encodeVarint(
shared.config.getint(myAddress, 'noncetrialsperbyte'))
payload += encodeVarint(
shared.config.getint(myAddress, 'payloadlengthextrabytes'))
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# Do the POW for this pubkey message
target = 2**64 / (
shared.networkDefaultProofOfWorkNonceTrialsPerByte *
(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes +
((TTL * (len(payload) + 8 +
shared.networkDefaultPayloadLengthExtraBytes)) /
(2**16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (objectType, streamNumber, payload,
embeddedTime, '')
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues(
(streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(myAddress, 'lastpubkeysendtime',
str(int(time.time())))
shared.writeKeysFile()
except:
# The user deleted the address out of the keys.dat file before this
# finished.
pass
def sendOutOrStoreMyV4Pubkey(self, myAddress):
if not shared.config.has_section(myAddress):
#The address has been deleted.
return
if shared.safeConfigGetBoolean(myAddress, 'chan'):
return
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(
-300, 300)) # 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
dataToEncrypt = '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(myAddress,
'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
dataToEncrypt += pubSigningKey[1:]
dataToEncrypt += pubEncryptionKey[1:]
dataToEncrypt += encodeVarint(
shared.config.getint(myAddress, 'noncetrialsperbyte'))
dataToEncrypt += encodeVarint(
shared.config.getint(myAddress, 'payloadlengthextrabytes'))
# When we encrypt, we'll use a hash of the data
# contained in an address as a decryption key. This way in order to
# read the public keys in a pubkey message, a node must know the address
# first. We'll also tag, unencrypted, the pubkey with part of the hash
# so that nodes know which pubkey object to try to decrypt when they
# want to send a message.
doubleHashOfAddressData = hashlib.sha512(
hashlib.sha512(
encodeVarint(addressVersionNumber) +
encodeVarint(streamNumber) + hash).digest()).digest()
payload += doubleHashOfAddressData[32:] # the tag
signature = highlevelcrypto.sign(payload + dataToEncrypt,
privSigningKeyHex)
dataToEncrypt += encodeVarint(len(signature))
dataToEncrypt += signature
privEncryptionKey = doubleHashOfAddressData[:32]
pubEncryptionKey = highlevelcrypto.pointMult(privEncryptionKey)
payload += highlevelcrypto.encrypt(dataToEncrypt,
pubEncryptionKey.encode('hex'))
# Do the POW for this pubkey message
target = 2**64 / (
shared.networkDefaultProofOfWorkNonceTrialsPerByte *
(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes +
((TTL * (len(payload) + 8 +
shared.networkDefaultPayloadLengthExtraBytes)) /
(2**16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (objectType, streamNumber, payload,
embeddedTime,
doubleHashOfAddressData[32:])
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues(
(streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(myAddress, 'lastpubkeysendtime',
str(int(time.time())))
shared.writeKeysFile()
except Exception as err:
pass
def sendOutOrStoreMyV3Pubkey(self, hash):
try:
myAddress = shared.myAddressesByHash[hash]
except:
#The address has been deleted.
return
if shared.safeConfigGetBoolean(myAddress, 'chan'):
return
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(-300, 300))# 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
signedTimeForProtocolV2 = embeddedTime - TTL
"""
According to the protocol specification, the expiresTime along with the pubkey information is
signed. But to be backwards compatible during the upgrade period, we shall sign not the
expiresTime but rather the current time. There must be precisely a 28 day difference
between the two. After the upgrade period we'll switch to signing the whole payload with the
expiresTime time.
"""
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
payload += encodeVarint(shared.config.getint(
myAddress, 'noncetrialsperbyte'))
payload += encodeVarint(shared.config.getint(
myAddress, 'payloadlengthextrabytes'))
signature = highlevelcrypto.sign(payload, privSigningKeyHex)
payload += encodeVarint(len(signature))
payload += signature
# Do the POW for this pubkey message
target = 2 ** 64 / (shared.networkDefaultProofOfWorkNonceTrialsPerByte*(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes + ((TTL*(len(payload)+8+shared.networkDefaultPayloadLengthExtraBytes))/(2 ** 16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime,'')
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues((
streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
shared.writeKeysFile()
except:
# The user deleted the address out of the keys.dat file before this
# finished.
pass
def doPOWForMyV2Pubkey(
self, hash
): # This function also broadcasts out the pubkey message once it is done with the POW
# Look up my stream number based on my address hash
"""configSections = shared.config.sections()
for addressInKeysFile in configSections:
if addressInKeysFile <> 'bitmessagesettings':
status,addressVersionNumber,streamNumber,hashFromThisParticularAddress = decodeAddress(addressInKeysFile)
if hash == hashFromThisParticularAddress:
myAddress = addressInKeysFile
break"""
myAddress = shared.myAddressesByHash[hash]
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(
-300, 300)) # 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
payload += '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(myAddress,
'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(privSigningKeyHex).decode(
'hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
payload += pubSigningKey[1:]
payload += pubEncryptionKey[1:]
# Do the POW for this pubkey message
target = 2**64 / (
shared.networkDefaultProofOfWorkNonceTrialsPerByte *
(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes +
((TTL * (len(payload) + 8 +
shared.networkDefaultPayloadLengthExtraBytes)) /
(2**16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (objectType, streamNumber, payload,
embeddedTime, '')
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues(
(streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(myAddress, 'lastpubkeysendtime',
str(int(time.time())))
shared.writeKeysFile()
except:
# The user deleted the address out of the keys.dat file before this
# finished.
pass
def sendOutOrStoreMyV4Pubkey(self, myAddress):
if not shared.config.has_section(myAddress):
#The address has been deleted.
return
if shared.safeConfigGetBoolean(myAddress, 'chan'):
return
status, addressVersionNumber, streamNumber, hash = decodeAddress(
myAddress)
TTL = int(28 * 24 * 60 * 60 + random.randrange(-300, 300))# 28 days from now plus or minus five minutes
embeddedTime = int(time.time() + TTL)
payload = pack('>Q', (embeddedTime))
payload += '\x00\x00\x00\x01' # object type: pubkey
payload += encodeVarint(addressVersionNumber) # Address version number
payload += encodeVarint(streamNumber)
dataToEncrypt = '\x00\x00\x00\x01' # bitfield of features supported by me (see the wiki).
try:
privSigningKeyBase58 = shared.config.get(
myAddress, 'privsigningkey')
privEncryptionKeyBase58 = shared.config.get(
myAddress, 'privencryptionkey')
except Exception as err:
return
privSigningKeyHex = shared.decodeWalletImportFormat(
privSigningKeyBase58).encode('hex')
privEncryptionKeyHex = shared.decodeWalletImportFormat(
privEncryptionKeyBase58).encode('hex')
pubSigningKey = highlevelcrypto.privToPub(
privSigningKeyHex).decode('hex')
pubEncryptionKey = highlevelcrypto.privToPub(
privEncryptionKeyHex).decode('hex')
dataToEncrypt += pubSigningKey[1:]
dataToEncrypt += pubEncryptionKey[1:]
dataToEncrypt += encodeVarint(shared.config.getint(
myAddress, 'noncetrialsperbyte'))
dataToEncrypt += encodeVarint(shared.config.getint(
myAddress, 'payloadlengthextrabytes'))
# When we encrypt, we'll use a hash of the data
# contained in an address as a decryption key. This way in order to
# read the public keys in a pubkey message, a node must know the address
# first. We'll also tag, unencrypted, the pubkey with part of the hash
# so that nodes know which pubkey object to try to decrypt when they
# want to send a message.
doubleHashOfAddressData = hashlib.sha512(hashlib.sha512(encodeVarint(
addressVersionNumber) + encodeVarint(streamNumber) + hash).digest()).digest()
payload += doubleHashOfAddressData[32:] # the tag
signature = highlevelcrypto.sign(payload + dataToEncrypt, privSigningKeyHex)
dataToEncrypt += encodeVarint(len(signature))
dataToEncrypt += signature
privEncryptionKey = doubleHashOfAddressData[:32]
pubEncryptionKey = highlevelcrypto.pointMult(privEncryptionKey)
payload += highlevelcrypto.encrypt(
dataToEncrypt, pubEncryptionKey.encode('hex'))
# Do the POW for this pubkey message
target = 2 ** 64 / (shared.networkDefaultProofOfWorkNonceTrialsPerByte*(len(payload) + 8 + shared.networkDefaultPayloadLengthExtraBytes + ((TTL*(len(payload)+8+shared.networkDefaultPayloadLengthExtraBytes))/(2 ** 16))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
payload = pack('>Q', nonce) + payload
inventoryHash = calculateInventoryHash(payload)
objectType = 1
shared.inventory[inventoryHash] = (
objectType, streamNumber, payload, embeddedTime, doubleHashOfAddressData[32:])
shared.inventorySets[streamNumber].add(inventoryHash)
shared.broadcastToSendDataQueues((
streamNumber, 'advertiseobject', inventoryHash))
try:
shared.config.set(
myAddress, 'lastpubkeysendtime', str(int(time.time())))
shared.writeKeysFile()
except Exception as err:
pass